the new image 15053

[rater]

Unfortunately, the new image 15053, which takes off

[santa]

What? I can't follow you.

[rater]

The box do not start

[santa]

Please test with an older harddisk.pyo

[EML]

Please test with an older harddisk.pyo

Installation doesn't start also on Amiko Alien 2

[santa]

Harddisk.pyo changed?

[rater]

now it's ok after change Harddisk.pyo

[samkooke]

hello not working octagons sf 918 SE.

[santa]

It's in all new images, read post above

[samkooke]

yes is not boot.

[rater]

the same problem with 15056

[tom_63]

U-Boot 1.3.1 (Oct 24 2008 - 18:17:25) - stm23-2008-03-19

Board: cuberevo-mini II (0x2D42C041)

Board: 14 dotmatrix vfd front
DRAM: 128 MB
Flash: 32 MB
In: serial

Out: serial
Err: serial
Reserve 0x2010000 bytes from 0xa5ff0000 for DGS upgrade buffer.
Saving Environment to Flash...
Un-Protected 1 sectors

Erasing Flash...
.
Erased 1 sectors
Writing to Flash... done
Protected 1 sectors

(Re)start USB...
USB: scanning bus for devices... 2 USB Device(s) found
scanning bus for storage devices... 1 Storage Device(s) found
1900659 bytes read
## Booting image at a5ff0000 ...

Image Name: Linux-2.6.32.61_stm24_0217
Image Type: SuperH Linux Kernel Image (gzip compressed)
Data Size: 1900595 Bytes = 1.8 MB
Load Address: 84001000
Entry Point: 84002000

Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Warning: Unable to determine if kernel is built for 29- or 32-bit mode!
Starting kernel console=ttyAS1,115200 panic=3 root=/dev/sdb1 rw rootdelay=10 init=/bin/devinit ip=192.168.1.3:192.168.1.254:192.168.1.254:255.255 .255.0 mem=128m coprocessor_mem=4m@0x10000000,4m@0x10400000 - 0x00000000 - 0 ...
INIT: version 2.88 booting

init frontpanel
WAIT 1 min
[mountvirtfs] Seems to be the first run - Making devices in /dev...
[makedev] Starting makedev...
CI-slot(s) : Yes
Tuners : 1

HDMI CEC : No
[makedev] done.
[mountvirtfs] Mount /dev in tmpfs
[mountvirtfs] Copying device nodes to /dev

Starting portmap daemon....
Loading autofs
Starting autofs
[mountall] Mounting local filesystems...
mount: mounting LABEL=RECORD on /hdd failed: No such file or directory

Cleaning /tmp /var/run /var/lock.
Hostname: IPBOX910.
init stmfb
offset key len data
found key tvmode ->value 2

720P-50
LOADING MODULES
load firmware
copLoadFile (file /boot/audio.elf)
ustslave: Kernel Version: 24
base_address 0x10400000

seeking to 0
seeking to 5f00
seeking to 12320
seeking to 1aa20
seeking to 173100
seeking to 173138

seeking to 173170
seeking to 1b9058
seeking to 1b9060
seeking to 1b9068

seeking to 1b9070
seeking to 1d0920
seeking to 1d0a00
copLoadFile (file /boot/video.elf)
ustslave: Kernel Version: 24
base_address 0x10000000

seeking to 0
seeking to 1277c0
seeking to 1277f8
seeking to 127830
seeking to 14d558
seeking to 14d564

seeking to 14d570
seeking to 17df30
seeking to 180000
init embx
init AVS
skip insmod tuner

Model: 'cuberevo-mini2'
vBoxType: 12
Input device name: "TDT RC event driver"
Selected Remote: Cuberevo RemoteControl

RemoteControl Map:
KEY_F1 - 00 - 59
KEY_F2 - 01 - 60
KEY_F3 - 02 - 61
INFO - 03 - 358
TV/RADIO - 04 - 378

PREVIOUS - 05 - 412
EPG - 06 - 365
RECORD - 07 - 167
FAVORITES - 08 - 364

MEDIA - 09 - 226
STANDBY - 0A - 116
KEY_F5 - 0B - 63
MUTE - 0C - 113
ARCHIVE - 0D - 361

0BUTTON - 10 - 11
1BUTTON - 11 - 2
2BUTTON - 12 - 3
3BUTTON - 13 - 4
4BUTTON - 14 - 5
5BUTTON - 15 - 6

6BUTTON - 16 - 7
7BUTTON - 17 - 8
8BUTTON - 18 - 9
9BUTTON - 19 - 10

UP - 1A - 103
DOWN - 1B - 108
RIGHT - 1C - 106
LEFT - 1D - 105
REWIND - 1E - 168

OK - 1F - 352
PLAY - 20 - 207
FASTFORWARD - 21 - 208
STOP - 22 - 128
SLOW - 23 - 409

BACK - 24 - 158
PAUSE - 25 - 119
MENU - 26 - 139
EXIT - 27 - 174
KEY_F7 - 28 - 65

KEY_BOOMARKS - 29 - 156
RED - 2A - 398
BLUE - 2B - 401
KEY_F8 - 2C - 66
GREEN - 2D - 399

YELLOW - 2E - 400
AUDIO - 2F - 392
SUBTITLE - 30 - 370
TEXT - 31 - 388
CHANNELUP - 32 - 402

CHANNELDOWN - 33 - 403
VOLUMEUP - 34 - 115
VOLUMEDOWN - 35 - 114
WWW - 36 - 150
Supports Long KeyPress: 1

processComplex >
period 10, delay 140
micom version = 2
Using period=10 delay=140
[SEM] DOWN
[mountall] Mounting local filesystems...
showSinglePic /boot/bootlogo.mvi

VIDEO_SELECT_SOURCE MEMORY (Success)
VIDEO_PLAY (Success)
VIDEO_CONTINUE: (Success)
VIDEO_CLEAR_BUFFER: (Invalid argument)
Deconfiguring network interfaces... ifdown: interface lo not configured
ifdown: interface eth0 not configured

ifdown: interface wlan0 not configured
done.
Setting up IP spoofing protection: rp_filter.
Configuring network interfaces... ip: RTNETLINK answers: File exists
udhcpc (v1.24.1) started
Sending discover...

Sending select for 10.79.0.210...
Lease of 10.79.0.210 obtained, lease time 864000
route: SIOCDELRT: No such process
adding dns 10.79.0.30
ip: SIOCGIFFLAGS: No such device
done.

mount: mounting LABEL=RECORD on /hdd failed: No such file or directory
[set_was_timer_wakeup] error reading /etc/enigma2/timers.xml
[set_was_timer_wakeup] no timer aktiv

starting e2->
Simple mixer control 'Analog',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback -31 - 31

Mono: Playback 6 [60%] [on]
Simple mixer control 'SPDIF',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback -31 - 31
Mono: Playback 6 [60%] [on]

Simple mixer control 'HDMI',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback -31 - 31
Mono: Playback 6 [60%] [on]

(enigma2:5880): GStreamer-WARNING **: External plugin loader failed. This most likely means that the plugin loader helper binary was not found or could not be run. You might need to set the GST_PLUGIN_SCANNER environment variable if your setup is unusual. This should normally not be required though.
mount: mounting LABEL=RECORD on /hdd failed: No such file or directory
PYTHONPATH: /usr/lib/enigma2/python
DVB_API_VERSION 5 DVB_API_VERSION_MINOR 3
ENIGMA2_DEBUG settings: Level=3

[MAIN] executing main
no profile data available
< 158.288> [HardwareInfo] Scanning hardware info
< 158.299> Detected: cuberevo-mini2
< 158.352> [Harddisk] enumerating block devices...

< 158.541> [Harddisk] new device sda -> /dev/sda -> /dev/sda
< 158.546> Traceback (most recent call last):
< 158.547> File "/usr/lib/enigma2/python/mytest.py", line 18, in <module>
< 158.548> from Screens import InfoBar
< 158.549> File "usr/lib/enigma2/python/Screens/InfoBar.py", line 6, in <module>
< 158.551> File "usr/lib/enigma2/python/Screens/MovieSelection.py", line 1, in <module>

< 158.553> File "usr/lib/enigma2/python/Screens/Screen.py", line 3, in <module>
< 158.555> File "usr/lib/enigma2/python/Components/GUISkin.py", line 1, in <module>
< 158.557> File "usr/lib/enigma2/python/Components/GUIComponent.py", line 1, in <module>
< 158.558> File "usr/lib/enigma2/python/skin.py", line 8, in <module>

< 158.560> File "usr/lib/enigma2/python/Components/config.py", line 4, in <module>
< 158.562> File "usr/lib/enigma2/python/Components/Harddisk.py", line 963, in <module>
< 158.564> File "usr/lib/enigma2/python/Components/Harddisk.py", line 640, in __init__
< 158.568> File "usr/lib/enigma2/python/Components/Harddisk.py", line 712, in enumerateBlockDevices
< 158.570> File "usr/lib/enigma2/python/Components/Harddisk.py", line 756, in addHotplugPartition

< 158.571> File "usr/lib/enigma2/python/Components/Harddisk.py", line 105, in __init__
< 158.574> AttributeError: Harddisk instance has no attribute 'card'
e2 ended <- RTV: 0
*
INIT: Switching to runstarting e2->
INIT: Sending processes the TERM signal

Sending all processes the TERM signal...done.
Sending all processes the KILL signal...done.
Deactivating swap...umount: tmpfs busy - remounted read-only
swapoff: can't stat 'LABEL=SWAPPART': No such file or directory
done.

Unmounting local filesystems...umount: tmpfs busy - remounted read-only
done.
Rebooting... init

[flac]

Der Log wurde doch schon im anderen Thread gepostet...





Gruß

flac

[tom_63]

Nein, dieser Log stammt von 15056. I andere Thread von 15054

[Joker7]

...stimmt

[flac]

Laut Thread-Überschriften aber nicht...


...beides 15053.


Dann sollte es dazu geschrieben werden. Der Übersicht halber....




Gruß

flac

[Joker7]

..ja,könnte man machen einen für 15053 = Endlosschleife...einen für 15054= Endlosschleife und aktuell dann z.Z. einen für 15056 = Endlosschleife ^^

[flac]

Wie soll ich das jetzt verstehen !?


Es reicht doch ganz einfach ein Zusatz, bei welchem Image das geloggt wurde....






Gruß

flac

[tom_63]

U-Boot 1.3.1 (Oct 24 2008 - 18:17:25) - stm23-2008-03-19
Board: cuberevo-mini II (0x2D42C041)
Board: 14 dotmatrix vfd front
DRAM: 128 MB
Flash: 32 MB
In: serial
Out: serial
Err: serial
Reserve 0x2010000 bytes from 0xa5ff0000 for DGS upgrade buffer.
Saving Environment to Flash...
Un-Protected 1 sectors
Erasing Flash...
.
Erased 1 sectors
Writing to Flash... done
Protected 1 sectors
(Re)start USB...
USB: scanning bus for devices... 2 USB Device(s) found
scanning bus for storage devices... 1 Storage Device(s) found


1900657 bytes read
## Booting image at a5ff0000 ...
Image Name: Linux-2.6.32.61_stm24_0217
Image Type: SuperH Linux Kernel Image (gzip compressed)
Data Size: 1900593 Bytes = 1.8 MB
Load Address: 84001000
Entry Point: 84002000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK


Warning: Unable to determine if kernel is built for 29- or 32-bit mode!


Starting kernel console=ttyAS1,115200 panic=3 root=/dev/sdb1 rw rootdelay=10 init=/bin/devinit ip=192.168.1.3:192.168.1.254:192.168.1.254:255.255 .255.0 mem=128m coprocessor_mem=4m@0x10000000,4m@0x10400000 - 0x00000000 - 0 ...


INIT: version 2.88 booting
init frontpanel
[mountvirtfs] Mount /dev in tmpfs
[mountvirtfs] Copying device nodes to /dev
Starting portmap daemon....
Loading autofs
Starting autofs
[mountall] Mounting local filesystems...
mount: mounting LABEL=RECORD on /hdd failed: No such file or directory
Cleaning /tmp.
Hostname: IPBOX910.
init stmfb
offset key len data
found key tvmode ->value 2
720P-50
LOADING MODULES
load firmware
copLoadFile (file /boot/audio.elf)
ustslave: Kernel Version: 24
base_address 0x10400000
seeking to 0
seeking to 5f00
seeking to 12320
seeking to 1aa20
seeking to 173100
seeking to 173138
seeking to 173170
seeking to 1b9058
seeking to 1b9060
seeking to 1b9068
seeking to 1b9070
seeking to 1d0920
seeking to 1d0a00
copLoadFile (file /boot/video.elf)
ustslave: Kernel Version: 24
base_address 0x10000000
seeking to 0
seeking to 1277c0
seeking to 1277f8
seeking to 127830
seeking to 14d558
seeking to 14d564
seeking to 14d570
seeking to 17df30
seeking to 180000
init embx
init AVS
skip insmod tuner
Model: 'cuberevo-mini2'
vBoxType: 12
Input device name: "TDT RC event driver"
Selected Remote: Cuberevo RemoteControl
RemoteControl Map:
KEY_F1 - 00 - 59
KEY_F2 - 01 - 60
KEY_F3 - 02 - 61
INFO - 03 - 358
TV/RADIO - 04 - 378
PREVIOUS - 05 - 412
EPG - 06 - 365
RECORD - 07 - 167
FAVORITES - 08 - 364
MEDIA - 09 - 226
STANDBY - 0A - 116
KEY_F5 - 0B - 63
MUTE - 0C - 113
ARCHIVE - 0D - 361
0BUTTON - 10 - 11
1BUTTON - 11 - 2
2BUTTON - 12 - 3
3BUTTON - 13 - 4
4BUTTON - 14 - 5
5BUTTON - 15 - 6
6BUTTON - 16 - 7
7BUTTON - 17 - 8
8BUTTON - 18 - 9
9BUTTON - 19 - 10
UP - 1A - 103
DOWN - 1B - 108
RIGHT - 1C - 106
LEFT - 1D - 105
REWIND - 1E - 168
OK - 1F - 352
PLAY - 20 - 207
FASTFORWARD - 21 - 208
STOP - 22 - 128
SLOW - 23 - 409
BACK - 24 - 158
PAUSE - 25 - 119
MENU - 26 - 139
EXIT - 27 - 174
KEY_F7 - 28 - 65
KEY_BOOMARKS - 29 - 156
RED - 2A - 398
BLUE - 2B - 401
KEY_F8 - 2C - 66
GREEN - 2D - 399
YELLOW - 2E - 400
AUDIO - 2F - 392
SUBTITLE - 30 - 370
TEXT - 31 - 388
CHANNELUP - 32 - 402
CHANNELDOWN - 33 - 403
VOLUMEUP - 34 - 115
VOLUMEDOWN - 35 - 114
WWW - 36 - 150
Supports Long KeyPress: 1
processComplex >
period 10, delay 140
micom version = 2
Using period=10 delay=140
[SEM] DOWN
[mountall] Mounting local filesystems...
showSinglePic /boot/bootlogo.mvi
VIDEO_SELECT_SOURCE MEMORY (Success)
VIDEO_PLAY (Success)
VIDEO_CONTINUE: (Success)
VIDEO_CLEAR_BUFFER: (Invalid argument)
Deconfiguring network interfaces... ifdown: interface lo not configured
ifdown: interface wlan0 not configured
done.
Setting up IP spoofing protection: rp_filter.
Configuring network interfaces... ip: RTNETLINK answers: File exists
udhcpc (v1.24.1) started
Sending discover...
mount: mounting LABEL=RECORD on /hdd failed: No such file or directory
Sending discover...
Sending select for 10.79.0.210...
Lease of 10.79.0.210 obtained, lease time 864000
route: SIOCDELRT: No such process
adding dns 10.79.0.30
ip: SIOCGIFFLAGS: No such device
done.
[set_was_timer_wakeup] error reading /etc/enigma2/timers.xml
[set_was_timer_wakeup] no timer aktiv
starting e2->
Simple mixer control 'SPDIF',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback -31 - 31
Mono: Playback 6 [60%] [on]
Simple mixer control 'HDMI',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback -31 - 31
Mono: Playback 6 [60%] [on]
Simple mixer control 'Analog',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback -31 - 31
Mono: Playback 6 [60%] [on]
PYTHONPATH: /usr/lib/enigma2/python
DVB_API_VERSION 5 DVB_API_VERSION_MINOR 3
ENIGMA2_DEBUG settings: Level=3
mount: mounting LABEL=RECORD on /hdd failed: No such file or directory
[MAIN] executing main
< 41.843> [HardwareInfo] Scanning hardware info
< 41.854> Detected: cuberevo-mini2
< 41.904> [Harddisk] enumerating block devices...
********** end showiframe
VIDEO_SELECT_SOURCE DEMUX (Invalid argument)
< 42.108> [Harddisk] new device sda -> /dev/sda -> /dev/sda
< 42.113> Traceback (most recent call last):
< 42.114> File "/usr/lib/enigma2/python/mytest.py", line 18, in <module>
< 42.115> from Screens import InfoBar
< 42.116> File "usr/lib/enigma2/python/Screens/InfoBar.py", line 6, in <module>
< 42.118> File "usr/lib/enigma2/python/Screens/MovieSelection.py", line 1, in <module>
< 42.119> File "usr/lib/enigma2/python/Screens/Screen.py", line 3, in <module>
< 42.121> File "usr/lib/enigma2/python/Components/GUISkin.py", line 1, in <module>
< 42.123> File "usr/lib/enigma2/python/Components/GUIComponent.py", line 1, in <module>
< 42.125> File "usr/lib/enigma2/python/skin.py", line 8, in <module>
< 42.127> File "usr/lib/enigma2/python/Components/config.py", line 4, in <module>
< 42.128> File "usr/lib/enigma2/python/Components/Harddisk.py", line 963, in <module>
< 42.130> File "usr/lib/enigma2/python/Components/Harddisk.py", line 640, in __init__
< 42.131> File "usr/lib/enigma2/python/Components/Harddisk.py", line 712, in enumerateBlockDevices
< 42.133> File "usr/lib/enigma2/python/Components/Harddisk.py", line 756, in addHotplugPartition
< 42.134> File "usr/lib/enigma2/python/Components/Harddisk.py", line 106, in __init__
< 42.136> File "usr/lib/enigma2/python/Components/Harddisk.py", line 490, in startIdle
< 42.137> File "usr/lib/enigma2/python/Components/Harddisk.py", line 137, in bus
< 42.139> AttributeError: Harddisk instance has no attribute 'card'
e2 ended <- RTV: 0
*
INIT: Switching to runlevel: 6starting e2->


INIT: Sending processes the TERM signal
Sending all processes the TERM signal...done.
Sending all processes the KILL signal...done.
Deactivating swap...umount: tmpfs busy - remounted read-only
swapoff: can't stat 'LABEL=SWAPPART': No such file or directory
done.
Unmounting local filesystems...umount: tmpfs busy - remounted read-only
done.
Rebooting... init