neue SH4-Images HDMU 15053

[Joker7]

Zitat @santa
"Please test with an older harddisk.pyo"


.... das gilt ja offensichtlich für alle neuen sh4...hier ne Kurzanleitung als Workaround :



---wenn sich die Box..wie zb bei meiner Kathie913....in der Endlosschleife befindet im Router wegen der IP der Box nachschauen

--- sich ins /usr/lib/enigma2/python/Components... z.B. mit FileZilla... vorarbeiten (meinst sich wegen der Schleife ja mehrere Einzelschritte nötig)

--- nun die hier angehängte Harddisk.pyo rüberschieben

[samkooke]

thanks no Impossible to connect to recever.

[Joker7]

..... DHCP on ?

[bonkel]

gibts nen log?

[meikilein]

bleibt bei meiner 913er in der Bootschleife hängen.............
Mfg Mike

[Joker7]

...komisch bei meiner 913.... nach dem Austausch der Harddisk.pyo.... ist alles ok....

[santa]

Benny, log hab ich

[samkooke]

hello is not working boot and reboot is not possible to connect to recever thanks.

[dreamce]

Spark 7111 hdmu 15053 setup problem

[prisrak]

ipbox 900hd. Bei mir gibt es ebenfalls eine Dauerschleife. Ich habe die Datei Harddisk.pyo ausgetauscht. Leider gab's keine Veränderung. Man kann entweder in die gepackte Datei rein Kopieren/austauschen und dann instalieren, oder mit dem Programm mat sofort installieren. Die entsprechende Datei austauschen und von der neuen installierten Partition das Img starten. So oder so gibt es bootdauerschleifen.

[santa]

Denke morgen oder so neues Image testen

[Eugen1968]

After HDMU_15053 installation UFS922 enter in cycle reboot... :(

[ghani]

Denke morgen oder so neues Image testen

Hallo santa, wieso seit ihre immer noch bei dem alten gst 1.6.1 geblieben, obwohl es jetzt die 1.9.1 gibt?

mfg

[Joker7]

..da hab ich ja dann mit der Kathie 913 und dem Edision Pingu "Glück" gehabt,daß nur der Ausstausch der Harddisk.pyo ausreichte...

.... nen Screen der Systeminfos vom Pingu mit der 15053 kann ich allerdings im Gegensatz zur 913 hier diesmal nicht beifügen,da das WebIF irgendwie bei mir nicht geht....ist aber ein anderes Thema .....das ich hier nur so nebenbei erwähne....

[santa]

wenn dann kommt 1.8., da dies die stable Version ist.
Derzeit bau ich im system zu viel im hintergrund um, ich hatte schon eine 1.8 Version am laufen, lief aber aus anderen Gründen nicht so gut, also abwarten

- - - Aktualisiert - - -

neue images bauen, twitterfeed verfolgen um neu testen zu können

[Joker7]

...so hab jetzt das oWI beim Spark aus der 14858 in die 15053 reingeschoben geht nun auch ^^

...aber lese grad wird eh alles neu gebaut...wobei je nach "Lust und Laune" etwas rumbasteln mir auch Spaß macht :)

[arrap1968]

Die HDMU 15054 hat den selben Fehler (Dauerbootschleife) jedenfals bei meinem Octagon 1008 G+ se+ !!

[rater]

the same problem with 15054

[tom_63]

Ich habe auch die Bootschleife bei einer IPBOX 910 HD

[santa]

Bitte serielles bootlog.

[bonkel]

i dont see a log :D

[tom_63]

hier das Log


U-Boot 1.3.1 (Oct 24 2008 - 18:17:25) - stm23-2008-03-19
Board: cuberevo-mini II (0x2D42C041)
Board: 14 dotmatrix vfd front
DRAM: 128 MB
Flash: 32 MB
In: serial
Out: serial
Err: serial
Reserve 0x2010000 bytes from 0xa5ff0000 for DGS upgrade buffer.
Saving Environment to Flash...
Un-Protected 1 sectors
Erasing Flash...
.
Erased 1 sectors
Writing to Flash... done
Protected 1 sectors
(Re)start USB...
USB: scanning bus for devices... 2 USB Device(s) found
scanning bus for storage devices... 1 Storage Device(s) found
1900654 bytes read
## Booting image at a5ff0000 ...
Image Name: Linux-2.6.32.61_stm24_0217
Image Type: SuperH Linux Kernel Image (gzip compressed)
Data Size: 1900590 Bytes = 1.8 MB
Load Address: 84001000
Entry Point: 84002000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Warning: Unable to determine if kernel is built for 29- or 32-bit mode!
Starting kernel console=ttyAS1,115200 panic=3 root=/dev/sdb1 rw rootdelay=10 init=/bin/devinit ip=192.168.1.3:192.168.1.254:192.168.1.254:255.255 .255.0 mem=128m coprocessor_mem=4m@0x10000000,4m@0x10400000 - 0x00000000 - 0 ...
INIT: version 2.88 booting
init frontpanel
[mountvirtfs] Mount /dev in tmpfs
[mountvirtfs] Copying device nodes to /dev
Starting portmap daemon....
Loading autofs
Starting autofs
[mountall] Mounting local filesystems...
mount: mounting LABEL=RECORD on /hdd failed: No such file or directory
Cleaning /tmp.
Hostname: IPBOX910.
init stmfb
offset key len data
found key tvmode ->value 2
720P-50
LOADING MODULES
load firmware
copLoadFile (file /boot/audio.elf)
ustslave: Kernel Version: 24
base_address 0x10400000
seeking to 0
seeking to 5f00
seeking to 12320
seeking to 1aa20
seeking to 173100
seeking to 173138
seeking to 173170
seeking to 1b9058
seeking to 1b9060
seeking to 1b9068
seeking to 1b9070
seeking to 1d0920
seeking to 1d0a00
copLoadFile (file /boot/video.elf)
ustslave: Kernel Version: 24
base_address 0x10000000
seeking to 0
seeking to 1277c0
seeking to 1277f8
seeking to 127830
seeking to 14d558
seeking to 14d564
seeking to 14d570
seeking to 17df30
seeking to 180000
init embx
init AVS
skip insmod tuner
Model: 'cuberevo-mini2'
vBoxType: 12
Input device name: "TDT RC event driver"
Selected Remote: Cuberevo RemoteControl
RemoteControl Map:
KEY_F1 - 00 - 59
KEY_F2 - 01 - 60
KEY_F3 - 02 - 61
INFO - 03 - 358
TV/RADIO - 04 - 378
PREVIOUS - 05 - 412
EPG - 06 - 365
RECORD - 07 - 167
FAVORITES - 08 - 364
MEDIA - 09 - 226
STANDBY - 0A - 116
KEY_F5 - 0B - 63
MUTE - 0C - 113
ARCHIVE - 0D - 361
0BUTTON - 10 - 11
1BUTTON - 11 - 2
2BUTTON - 12 - 3
3BUTTON - 13 - 4
4BUTTON - 14 - 5
5BUTTON - 15 - 6
6BUTTON - 16 - 7
7BUTTON - 17 - 8
8BUTTON - 18 - 9
9BUTTON - 19 - 10
UP - 1A - 103
DOWN - 1B - 108
RIGHT - 1C - 106
LEFT - 1D - 105
REWIND - 1E - 168
OK - 1F - 352
PLAY - 20 - 207
FASTFORWARD - 21 - 208
STOP - 22 - 128
SLOW - 23 - 409
BACK - 24 - 158
PAUSE - 25 - 119
MENU - 26 - 139
EXIT - 27 - 174
KEY_F7 - 28 - 65
KEY_BOOMARKS - 29 - 156
RED - 2A - 398
BLUE - 2B - 401
KEY_F8 - 2C - 66
GREEN - 2D - 399
YELLOW - 2E - 400
AUDIO - 2F - 392
SUBTITLE - 30 - 370
TEXT - 31 - 388
CHANNELUP - 32 - 402
CHANNELDOWN - 33 - 403
VOLUMEUP - 34 - 115
VOLUMEDOWN - 35 - 114
WWW - 36 - 150
Supports Long KeyPress: 1
processComplex >
period 10, delay 140
micom version = 2
Using period=10 delay=140
[SEM] DOWN
[mountall] Mounting local filesystems...
showSinglePic /boot/bootlogo.mvi
VIDEO_SELECT_SOURCE MEMORY (Success)
VIDEO_PLAY (Success)
VIDEO_CONTINUE: (Success)
VIDEO_CLEAR_BUFFER: (Invalid argument)
Deconfiguring network interfaces... ifdown: interface lo not configured
ifdown: interface wlan0 not configured
done.
Setting up IP spoofing protection: rp_filter.
Configuring network interfaces... ip: RTNETLINK answers: File exists
udhcpc (v1.24.1) started
Sending discover...
mount: mounting LABEL=RECORD on /hdd failed: No such file or directory
Sending discover...
Sending select for 10.79.0.210...
Lease of 10.79.0.210 obtained, lease time 864000
route: SIOCDELRT: No such process
adding dns 10.79.0.30
[set_was_timer_wakeup] error reading /etc/enigma2/timers.xml
[set_was_timer_wakeup] no timer aktiv
starting e2->
Simple mixer control 'SPDIF',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback -31 - 31
Mono: Playback 6 [60%] [on]
Simple mixer control 'Analog',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback -31 - 31
Mono: Playback 6 [60%] [on]
ip: SIOCGIFFLAGS: No such device
done.
Simple mixer control 'HDMI',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback -31 - 31
Mono: Playback 6 [60%] [on]
PYTHONPATH: /usr/lib/enigma2/python
DVB_API_VERSION 5 DVB_API_VERSION_MINOR 3
ENIGMA2_DEBUG settings: Level=3
mount: mounting LABEL=RECORD on /hdd failed: No such file or directory
[MAIN] executing main
< 41.355> [HardwareInfo] Scanning hardware info
< 41.367> Detected: cuberevo-mini2
< 41.417> [Harddisk] enumerating block devices...
< 41.612> Traceback (most recent call last):
< 41.613> File "/usr/lib/enigma2/python/mytest.py", line 18, in <module>
< 41.614> from Screens import InfoBar
< 41.615> File "usr/lib/enigma2/python/Screens/InfoBar.py", line 6, in <module>
< 41.617> File "usr/lib/enigma2/python/Screens/MovieSelection.py", line 1, in <module>
< 41.619> File "usr/lib/enigma2/python/Screens/Screen.py", line 3, in <module>
< 41.621> File "usr/lib/enigma2/python/Components/GUISkin.py", line 1, in <module>
< 41.622> File "usr/lib/enigma2/python/Components/GUIComponent.py", line 1, in <module>
< 41.624> File "usr/lib/enigma2/python/skin.py", line 8, in <module>
< 41.626> File "usr/lib/enigma2/python/Components/config.py", line 4, in <module>
< 41.628> File "usr/lib/enigma2/python/Components/Harddisk.py", line 954, in <module>
< 41.629> File "usr/lib/enigma2/python/Components/Harddisk.py", line 636, in __init__
< 41.631> File "usr/lib/enigma2/python/Components/Harddisk.py", line 708, in enumerateBlockDevices
< 41.633> File "usr/lib/enigma2/python/Components/Harddisk.py", line 747, in addHotplugPartition
< 41.634> File "usr/lib/enigma2/python/Components/Harddisk.py", line 89, in __init__
< 41.636> OSError: [Errno 2] No such file or directory: '/dev/discs'
********** end showiframe
VIDEO_SELECT_SOURCE DEMUX (Invalid argument)
e2 ended <- RTV: 0
*
starting e2->
INIT: Switching to runlevel: 6INIT: Sending processes the TERM signal
Sending all processes the TERM signal...done.
Sending all processes the KILL signal...done.
Deactivating swap...umount: tmpfs busy - remounted read-only
swapoff: can't stat 'LABEL=SWAPPART': No such file or directory
done.
Unmounting local filesystems...umount: tmpfs busy - remounted read-only
done.
Rebooting... init


Geändert > flac

[flac]

Bitte in einer CodeBox posten....

Das ist keine.






Gruß

flac

[rater]

the same problem with 15056

[dreamce]

spark 7111 hdmu 15056 setup problem

[macmanolo]

Triplex 15056 komm auch in eine boot schleife

#Log file from Morlys SH4 STB Admin Tool from: sá. may. 21 2016, 18:36:47

Board: STx7105-PDK [32-bit mode]


U-Boot 1.3.1-g72483220 (Jan 17 2012 - 17:10:49) - stm23_0051 - YW_1.1.003-9-g7248322 overclock

DRAM: 256 MiB
NAND: Bad block table found at page 262080, version 0x01
Bad block table found at page 262016, version 0x01
512 MiB
SPI: info: found S25FL016K (2MiB) device (page=256,erase=65536)
warning: SPI device may be write-protected (status=0x9c)
In: serial
Out: serial
Err: serial
Ident ic exist

Ident ic get stb id

IdentID : 0c 00 07 xx xx xx xx

Hit ESC to stop autoboot: 3 2 1 0

Loading from NAND 512MiB 3,3V 8-bit, offset 0x18400000
Image Name: Linux-2.6.32.61_stm24_0217
Image Type: SuperH Linux Kernel Image (gzip compressed)
Data Size: 2080388 Bytes = 2 MiB
Load Address: 80801000
Entry Point: 80802000
## Booting image at 80000000 ...
Image Name: Linux-2.6.32.61_stm24_0217
Image Type: SuperH Linux Kernel Image (gzip compressed)
Data Size: 2080388 Bytes = 2 MiB
Load Address: 80801000
Entry Point: 80802000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
stmac_phy_get_addr(): id1 = 0xffff, id2 = 0xffff
found phy at addres = 2
stmac_phy_get_addr(): id1 = 0x7, id2 = 0xc0f1
stb_id = c070066f

Starting kernel console=ttyAS0,115200 rw root=/dev/sda6 init=/bin/devinit coprocessor_mem=4m@0x40000000,4m@0x40400000 printk=1 ip=172.100.100.249:172.100.100.174:172.100.100.174 :255.255.255.0:Enigma2:eth0:off stmmaceth=msglvl:0,phyaddr:2,watchdog:5000 bigphysarea=6000 rootdelay=9 nwhwconf=device:eth0,hwaddr:30:00:07:00:06:6F Manufacture=Spark-Project STB_ID=0C:00:07:00:00:06:6F - 0x00000000 - 0 ...


INIT: version 2.88 booting

init frontpanel
[mountvirtfs] Mount /dev in tmpfs
[mountvirtfs] Copying device nodes to /dev
Starting portmap daemon....
Loading autofs
Starting autofs
[mountall] Mounting local filesystems...
Cleaning /tmp.
Hostname: SPARK7162.
init stmfb
LOADING MODULES
load firmware
copLoadFile (file /boot/audio.elf)
ustslave: Kernel Version: 24
base_address 0x40400000
seeking to 0
seeking to 5e00
seeking to 12460
seeking to 1ab60
seeking to 154300
seeking to 154338
seeking to 154370
seeking to 191a58
seeking to 191a60
seeking to 191a68
seeking to 191a70
seeking to 1aae40
seeking to 1aaf00
copLoadFile (file /boot/video.elf)
ustslave: Kernel Version: 24
base_address 0x40000000
seeking to 0
seeking to e2dc0
seeking to e2df8
seeking to e2e30
seeking to e8fe8
seeking to e8ff4
seeking to e9000
seeking to 115710
seeking to 117800
init embx
init AVS
skip mpeg2
insmod: /lib/modules/.ko: module not found
lircd-0.9.0[1407]: lircd(default) ready, using /var/run/lirc/lircd

[mountall] Mounting local filesystems...
showSinglePic /boot/bootlogo.mvi
Input device name: "Fulan front panel button driver"
VIDEO_SELECT_SOURCE MEMORY (Success)
Input device name: "TDT RC event driver"
Selected Remote: LircdName Universal RemoteControl v.1.2
RemoteControl Map:
KEY_OK - => - 352
KEY_UP - => - 103
KEY_DOWN - => - 108
KEY_RIGHT - => - 106
KEY_LEFT - => - 105
KEY_RED - => - 398
KEY_GREEN - => - 399
KEY_YELLOW - => - 400
KEY_BLUE - => - 401
KEY_POWER - => - 116
KEY_VOLUMEUP - => - 115
KEY_VOLUMEDOWN - => - 114
KEY_MUTE - => - 113
KEY_PAGEUP - => - 104
KEY_PAGEDOWN - => - 109
KEY_MENU - => - 139
KEY_HOME - => - 102
KEY_OPTION - => - 357
KEY_EPG - => - 365
KEY_GOTO - => - 354
KEY_PROGRAM - => - 362
KEY_TEXT - => - 388
KEY_HELP - => - 138
KEY_LIST - => - 395
KEY_MEDIA - => - 226
KEY_1 - => - 2
KEY_2 - => - 3
KEY_3 - => - 4
KEY_4 - => - 5
KEY_5 - => - 6
KEY_6 - => - 7
KEY_7 - => - 8
KEY_8 - => - 9
KEY_9 - => - 10
KEY_0 - => - 11
KEY_PVR - => - 366
KEY_PLAY - => - 207
KEY_PAUSE - => - 119
KEY_RECORD - => - 167
KEY_STOP - => - 128
KEY_FASTFORWARD - => - 208
KEY_REWIND - => - 168
KEY_MODE - => - 373
KEY_SUBTITLE - => - 370
KEY_V - => - 47
KEY_AUX - => - 390
KEY_TIME - => - 359
KEY_TV2 - => - 378
KEY_BACK - => - 158
KEY_FIND - => - 136
KEY_ARCHIVE - => - 361
KEY_INFO - => - 358
KEY_FAVORITES - => - 364
KEY_SAT - => - 381
KEY_PREVIOUS - => - 412
KEY_NEXT - => - 407
KEY_F - => - 33
KEY_SLOW - => - 409
KEY_P - => - 25
KEY_CLOSE - => - 206
KEY_T - => - 20
KEY_F1 - => - 59
KEY_F2 - => - 60
KEY_F3 - => - 61
KEY_SELECT - => - 353
KEY_POWER2 - => - 356
KEY_CLEAR - => - 355
KEY_VENDOR - => - 360
KEY_CHANNEL - => - 363
KEY_MHP - => - 367
KEY_LANGUAGE - => - 368
KEY_TITLE - => - 369
KEY_ANGLE - => - 371
KEY_ZOOM - => - 372
KEY_KEYBOARD - => - 374
KEY_SCREEN - => - 375
KEY_PC - => - 376
KEY_TV - => - 377
KEY_VCR - => - 379
KEY_VCR2 - => - 380
KEY_SAT2 - => - 382
KEY_CD - => - 383
KEY_TAPE - => - 384
KEY_RADIO - => - 385
KEY_TUNER - => - 386
KEY_PLAYER - => - 387
KEY_DVD - => - 389
KEY_MP3 - => - 391
KEY_AUDIO - => - 392
KEY_VIDEO - => - 393
KEY_DIRECTORY - => - 394
KEY_MEMO - => - 396
KEY_CALENDAR - => - 397
KEY_CHANNELUP - => - 402
KEY_CHANNELDOWN - => - 403
KEY_FIRST - => - 404
KEY_LAST - => - 405
KEY_AB - => - 406
KEY_RESTART - => - 408
KEY_SHUFFLE - => - 410
KEY_DIGITS - => - 413
KEY_TEEN - => - 414
KEY_TWEN - => - 415
KEY_BREAK - => - 411
KEY_PLAYPAUSE - => - 164
KEY_EXIT - => - 174
KEY_SLEEP - => - 142
Supports Long KeyPress: 1
processComplex >
[LircdName RCU] init delay 50 ms, blinking ICON 35
Using period=100 delay=50
lircd-0.9.0[1407]: accepted new client on /var/run/lirc/lircd

VIDEO_PLAY (Success)
VIDEO_CONTINUE: (Success)
VIDEO_CLEAR_BUFFER: (Invalid argument)
[SEM] DOWN
Deconfiguring network interfaces... ifdown: interface lo not configured
ifdown: interface wlan0 not configured
done.
Setting up IP spoofing protection: rp_filter.
Configuring network interfaces... ip: RTNETLINK answers: File exists
udhcpc (v1.24.1) started
Sending discover...
[set_was_timer_wakeup] error reading /etc/enigma2/timers.xml
[set_was_timer_wakeup] no timer aktiv
starting e2->
Sending discover...
Simple mixer control 'HDMI',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback -31 - 31
Mono: Playback 6 [60%] [on]
Simple mixer control 'SPDIF',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback -31 - 31
Mono: Playback 6 [60%] [on]
Simple mixer control 'Analog',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback -31 - 31
Mono: Playback 6 [60%] [on]
PYTHONPATH: /usr/lib/enigma2/python
DVB_API_VERSION 5 DVB_API_VERSION_MINOR 3
ENIGMA2_DEBUG settings: Level=3
Sending discover...
[MAIN] executing main
failed...
No lease, failing
ip: SIOCGIFFLAGS: No such device
done.
< 30.333> [HardwareInfo] Scanning hardware info
< 30.341> Detected: spark7162
< 30.379> [Harddisk] enumerating block devices...
< 30.467> [Harddisk] new device sda -> /dev/sda -> /dev/sda
< 30.616> [Harddisk] new device sdb -> /dev/sdb -> /dev/sdb
< 30.618> Traceback (most recent call last):
< 30.618> File "/usr/lib/enigma2/python/mytest.py", line 18, in <module>
< 30.619> from Screens import InfoBar
< 30.620> File "usr/lib/enigma2/python/Screens/InfoBar.py", line 6, in <module>
< 30.621> File "usr/lib/enigma2/python/Screens/MovieSelection.py", line 1, in <module>
< 30.622> File "usr/lib/enigma2/python/Screens/Screen.py", line 3, in <module>
< 30.622> File "usr/lib/enigma2/python/Components/GUISkin.py", line 1, in <module>
< 30.623> File "usr/lib/enigma2/python/Components/GUIComponent.py", line 1, in <module>
< 30.624> File "usr/lib/enigma2/python/skin.py", line 8, in <module>
< 30.625> File "usr/lib/enigma2/python/Components/config.py", line 4, in <module>
< 30.626> File "usr/lib/enigma2/python/Components/Harddisk.py", line 963, in <module>
< 30.627> File "usr/lib/enigma2/python/Components/Harddisk.py", line 640, in __init__
< 30.628> File "usr/lib/enigma2/python/Components/Harddisk.py", line 712, in enumerateBlockDevices
< 30.629> File "usr/lib/enigma2/python/Components/Harddisk.py", line 756, in addHotplugPartition
< 30.629> File "usr/lib/enigma2/python/Components/Harddisk.py", line 105, in __init__
< 30.630> AttributeError: Harddisk instance has no attribute 'card'
e2 ended <- RTV: 0
*
starting e2->

INIT: Switching to run
INIT: Sending processes the TERM signal

lircd-0.9.0[1407]: removed client

Sending all processes the TERM signal...lircd-0.9.0[1407]: caught signal

done.
Sending all processes the KILL signal...done.
Deactivating swap...umount: tmpfs busy - remounted read-only
done.
Unmounting local filesystems...umount: tmpfs busy - remounted read-only
done.
Rebooting...
mfg

[samkooke]

hello yes is not working the same probleme boot and reboot.

- - - Updated - - -

no the same problem 15057.

[vio]

Nach abziehen des Sticks ist die Box durchgestartet.

[bonkel]

make a log of 15057

ther must be a other error

[vio]

Habe leider keine möglichkeit ein Log zu machen, aber die Bootschleife lässt sich reproduzieren.
1. Stick rein und flashen -> Bootschleife
2. Stick abziehen -> Box startet durch
3. Festplatte anstecken -> Bootschleife

Getestet:
HDMU_15056_E2_spark7162_217_git_4129
(http://images.hdmedia-universe.com/spark7162/HDMU_15056_E2_spark7162_217_git_4129_nodebug_mix_U SB.tar.gz.md5)HDMU_15053_E2_spark7162_217_git_4129 (http://images.hdmedia-universe.com/spark7162/HDMU_15053_E2_spark7162_217_git_4129_nodebug_mix_U SB.tar.gz.md5)
(http://images.hdmedia-universe.com/spark7162/HDMU_15056_E2_spark7162_217_git_4129_nodebug_mix_U SB.tar.gz.md5)

[Joker7]

..auch nach einem Austausch der "Harddisk.pyo" ...oder geht das bei Dir nicht ?

[vio]

Sorry, habs für heute aufgegeben. Sitze schon den ganzen Tag dran. Eventuell morgen.

[Joker7]

...kein Thema..verstehe !

[Joker7]

Teilzitat:

"make a log of 15057"


...um dann hier gegängelt zu werden weil man es nicht in eine Codebox gestellt hat? ^^

...Sorry aber manchmal "platzt es einfach aus mir heraus" !!!

[flac]

Tja, man merkt einfach, das du nicht mit einem Tablet/Handy mitliest...


...und das hat nichts mit Gängelung zu tun.





Gruß

flac

[Joker7]

...Dein Handy/Tablet interessiert mich pers. peripher.... die Art der Moderation aber schon !!

[flac]

Wenn, können wir das gern via PN diskutieren....

....ich lass mich hier nicht von dir provozieren.





Gruß

flac

[Joker7]

..ich will Dich sicherlich nicht "provozieren" !!

..hab mir das lang genug hier aus meiner pers. Sicht !!! stillschweigend und ohne jeglichen Kommentar angeschaut !!..irgendwann ist das Ende erreicht !!

...Thema für mich mit dieser Aussage beendet !!!

[macmanolo]

Triplex 15057 kom immer noch im eine bootschleife, apropo das startup image ist immer noch das alte, (nicht wie bei mips).


#Log file from Morlys SH4 STB Admin Tool from: do. may. 22 2016, 09:37:03

Board: STx7105-PDK [32-bit mode]


U-Boot 1.3.1-g72483220 (Jan 17 2012 - 17:10:49) - stm23_0051 - YW_1.1.003-9-g7248322 overclock

DRAM: 256 MiB
NAND: Bad block table found at page 262080, version 0x01
Bad block table found at page 262016, version 0x01
512 MiB
SPI: info: found S25FL016K (2MiB) device (page=256,erase=65536)
warning: SPI device may be write-protected (status=0x9c)
In: serial
Out: serial
Err: serial
Ident ic exist

Ident ic get stb id

IdentID : 0c 00 07 xx xx xx xx

Hit ESC to stop autoboot: 3 2 1 0

Loading from NAND 512MiB 3,3V 8-bit, offset 0x18400000
Image Name: Linux-2.6.32.61_stm24_0217
Image Type: SuperH Linux Kernel Image (gzip compressed)
Data Size: 2080381 Bytes = 2 MiB
Load Address: 80801000
Entry Point: 80802000
## Booting image at 80000000 ...
Image Name: Linux-2.6.32.61_stm24_0217
Image Type: SuperH Linux Kernel Image (gzip compressed)
Data Size: 2080381 Bytes = 2 MiB
Load Address: 80801000
Entry Point: 80802000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
stmac_phy_get_addr(): id1 = 0xffff, id2 = 0xffff
found phy at addres = 2
stmac_phy_get_addr(): id1 = 0x7, id2 = 0xc0f1
stb_id = c070066f

Starting kernel console=ttyAS0,115200 rw root=/dev/sda6 init=/bin/devinit coprocessor_mem=4m@0x40000000,4m@0x40400000 printk=1 ip=172.100.100.249:172.100.100.174:172.100.100.174 :255.255.255.0:Enigma2:eth0:off stmmaceth=msglvl:0,phyaddr:2,watchdog:5000 bigphysarea=6000 rootdelay=9 nwhwconf=device:eth0,hwaddr:30:00:07:00:06:6F Manufacture=Spark-Project STB_ID=0C:00:07:00:00:06:6F - 0x00000000 - 0 ...


INIT: version 2.88 booting

init frontpanel
[mountvirtfs] Mount /dev in tmpfs
[mountvirtfs] Copying device nodes to /dev
Starting portmap daemon....
Loading autofs
Starting autofs
[mountall] Mounting local filesystems...
Cleaning /tmp.
Hostname: SPARK7162.
init stmfb
LOADING MODULES
load firmware
copLoadFile (file /boot/audio.elf)
ustslave: Kernel Version: 24
base_address 0x40400000
seeking to 0
seeking to 5e00
seeking to 12460
seeking to 1ab60
seeking to 154300
seeking to 154338
seeking to 154370
seeking to 191a58
seeking to 191a60
seeking to 191a68
seeking to 191a70
seeking to 1aae40
seeking to 1aaf00
copLoadFile (file /boot/video.elf)
ustslave: Kernel Version: 24
base_address 0x40000000
seeking to 0
seeking to e2dc0
seeking to e2df8
seeking to e2e30
seeking to e8fe8
seeking to e8ff4
seeking to e9000
seeking to 115710
seeking to 117800
init embx
init AVS
skip mpeg2
insmod: /lib/modules/.ko: module not found
lircd-0.9.0[1407]: lircd(default) ready, using /var/run/lirc/lircd

Input device name: "Fulan front panel button driver"
Input device name: "TDT RC event driver"
Selected Remote: LircdName Universal RemoteControl v.1.2
RemoteControl Map:
KEY_OK - => - 352
KEY_UP - => - 103
KEY_DOWN - => - 108
KEY_RIGHT - => - 106
KEY_LEFT - => - 105
KEY_RED - => - 398
KEY_GREEN - => - 399
KEY_YELLOW - => - 400
KEY_BLUE - => - 401
KEY_POWER - => - 116
KEY_VOLUMEUP - => - 115
KEY_VOLUMEDOWN - => - 114
KEY_MUTE - => - 113
KEY_PAGEUP - => - 104
KEY_PAGEDOWN - => - 109
KEY_MENU - => - 139
KEY_HOME - => - 102
KEY_OPTION - => - 357
KEY_EPG - => - 365
KEY_GOTO - => - 354
KEY_PROGRAM - => - 362
KEY_TEXT - => - 388
KEY_HELP - => - 138
KEY_LIST - => - 395
KEY_MEDIA - => - 226
KEY_1 - => - 2
KEY_2 - => - 3
KEY_3 - => - 4
KEY_4 - => - 5
KEY_5 - => - 6
KEY_6 - => - 7
KEY_7 - => - 8
KEY_8 - => - 9
KEY_9 - => - 10
KEY_0 - => - 11
KEY_PVR - => - 366
KEY_PLAY - => - 207
KEY_PAUSE - => - 119
KEY_RECORD - => - 167
KEY_STOP - => - 128
KEY_FASTFORWARD - => - 208
KEY_REWIND - => - 168
KEY_MODE - => - 373
KEY_SUBTITLE - => - 370
KEY_V - => - 47
KEY_AUX - => - 390
KEY_TIME - => - 359
KEY_TV2 - => - 378
KEY_BACK - => - 158
KEY_FIND - => - 136
KEY_ARCHIVE - => - 361
KEY_INFO - => - 358
KEY_FAVORITES - => - 364
KEY_SAT - => - 381
KEY_PREVIOUS - => - 412
KEY_NEXT - => - 407
KEY_F - => - 33
KEY_SLOW - => - 409
KEY_P - => - 25
KEY_CLOSE - => - 206
KEY_T - => - 20
KEY_F1 - => - 59
KEY_F2 - => - 60
KEY_F3 - => - 61
KEY_SELECT - => - 353
KEY_POWER2 - => - 356
KEY_CLEAR - => - 355
KEY_VENDOR - => - 360
KEY_CHANNEL - => - 363
KEY_MHP - => - 367
KEY_LANGUAGE - => - 368
KEY_TITLE - => - 369
KEY_ANGLE - => - 371
KEY_ZOOM - => - 372
KEY_KEYBOARD - => - 374
KEY_SCREEN - => - 375
KEY_PC - => - 376
KEY_TV - => - 377
KEY_VCR - => - 379
KEY_VCR2 - => - 380
KEY_SAT2 - => - 382
KEY_CD - => - 383
KEY_TAPE - => - 384
KEY_RADIO - => - 385
KEY_TUNER - => - 386
KEY_PLAYER - => - 387
KEY_DVD - => - 389
KEY_MP3 - => - 391
KEY_AUDIO - => - 392
KEY_VIDEO - => - 393
KEY_DIRECTORY - => - 394
KEY_MEMO - => - 396
KEY_CALENDAR - => - 397
KEY_CHANNELUP - => - 402
KEY_CHANNELDOWN - => - 403
KEY_FIRST - => - 404
KEY_LAST - => - 405
KEY_AB - => - 406
KEY_RESTART - => - 408
KEY_SHUFFLE - => - 410
KEY_DIGITS - => - 413
KEY_TEEN - => - 414
KEY_TWEN - => - 415
KEY_BREAK - => - 411
KEY_PLAYPAUSE - => - 164
KEY_EXIT - => - 174
KEY_SLEEP - => - 142
Supports Long KeyPress: 1
processComplex >
[LircdName RCU] init delay 50 ms, blinking ICON 35
Using period=100 delay=50
[SEM] DOWN
lircd-0.9.0[1407]: accepted new client on /var/run/lirc/lircd

showSinglePic /boot/bootlogo.mvi
[mountall] Mounting local filesystems...
VIDEO_SELECT_SOURCE MEMORY (Success)
VIDEO_PLAY (Success)
VIDEO_CONTINUE: (Success)
VIDEO_CLEAR_BUFFER: (Invalid argument)
Deconfiguring network interfaces... ifdown: interface lo not configured
ifdown: interface wlan0 not configured
done.
Setting up IP spoofing protection: rp_filter.
Configuring network interfaces... ip: RTNETLINK answers: File exists
udhcpc (v1.24.1) started
Sending discover...
[set_was_timer_wakeup] error reading /etc/enigma2/timers.xml
[set_was_timer_wakeup] no timer aktiv
starting e2->
Simple mixer control 'HDMI',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback -31 - 31
Mono: Playback 6 [60%] [on]
Simple mixer control 'SPDIF',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback -31 - 31
Mono: Playback 6 [60%] [on]
Simple mixer control 'Analog',0

Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback -31 - 31
Mono: Playback 6 [60%] [on]
Sending discover...
PYTHONPATH: /usr/lib/enigma2/python
DVB_API_VERSION 5 DVB_API_VERSION_MINOR 3
ENIGMA2_DEBUG settings: Level=3
Sending discover...
Sending select for 192.168.1.87...
Lease of 192.168.1.87 obtained, lease time 86400
route: SIOCDELRT: No such process
adding dns 192.168.1.1
ip: SIOCGIFFLAGS: No such device
done.
[MAIN] executing main
< 30.317> [HardwareInfo] Scanning hardware info
< 30.325> Detected: spark7162
< 30.364> [Harddisk] enumerating block devices...
< 30.453> [Harddisk] new device sda -> /dev/sda -> /dev/sda
< 30.601> [Harddisk] new device sdb -> /dev/sdb -> /dev/sdb
< 30.604> Traceback (most recent call last):
< 30.605> File "/usr/lib/enigma2/python/mytest.py", line 18, in <module>
< 30.605> from Screens import InfoBar
< 30.606> File "usr/lib/enigma2/python/Screens/InfoBar.py", line 6, in <module>
< 30.607> File "usr/lib/enigma2/python/Screens/MovieSelection.py", line 1, in <module>
< 30.608> File "usr/lib/enigma2/python/Screens/Screen.py", line 3, in <module>
< 30.609> File "usr/lib/enigma2/python/Components/GUISkin.py", line 1, in <module>
< 30.610> File "usr/lib/enigma2/python/Components/GUIComponent.py", line 1, in <module>
< 30.611> File "usr/lib/enigma2/python/skin.py", line 8, in <module>
< 30.612> File "usr/lib/enigma2/python/Components/config.py", line 4, in <module>
< 30.613> File "usr/lib/enigma2/python/Components/Harddisk.py", line 963, in <module>
< 30.613> File "usr/lib/enigma2/python/Components/Harddisk.py", line 640, in __init__
< 30.614> File "usr/lib/enigma2/python/Components/Harddisk.py", line 712, in enumerateBlockDevices
< 30.615> File "usr/lib/enigma2/python/Components/Harddisk.py", line 756, in addHotplugPartition
< 30.616> File "usr/lib/enigma2/python/Components/Harddisk.py", line 106, in __init__
< 30.616> File "usr/lib/enigma2/python/Components/Harddisk.py", line 490, in startIdle
< 30.617> File "usr/lib/enigma2/python/Components/Harddisk.py", line 137, in bus
< 30.618> AttributeError: Harddisk instance has no attribute 'card'
********** end showiframe
VIDEO_SELECT_SOURCE DEMUX (Invalid argument)
e2 ended <- RTV: 0
*
starting e2->

INIT: Switching to run
INIT: Sending processes the TERM signal

lircd-0.9.0[1407]: removSending all processes the TERM signal...done.
lircd-0.9.0[1407]: caught signal

Sending all processes the KILL signal...done.
Deactivating swap...umount: tmpfs busy - remounted read-only
done.
Unmounting local filesystems...umount: tmpfs busy - remounted read-only
done.
Rebooting...

mfg

[nebojsa]

topfild 7700 some problem....dont start

[ergün]

topfild 7700 macht nach upload immer eine boot start HDMU_15057_E2_topf_217_git_4129_nodebug_mix.zip (http://images.hdmedia-universe.com/topf/HDMU_15057_E2_topf_217_git_4129_nodebug_mix.zip)

[samkooke]

hello all is working version 15083 thanks bonkel.

[samkooke]

hello Mister bonkel I have a craslog here the log:

HDMU Enigma2 crash log


crashdate=Sun May 22 12:07:55 2016
compiledate=May 22 2016
skin=skin.xml
sourcedate=May 22 2016
branch=(no branch)
rev=
component=Enigma2

stbmodel=hs7110
stbmodel=hs7110
kernelcmdline=console=ttyAS0,115200 panic=1 ubi.mtd=3 root=ubi0:rootfs rootfstype=ubifs rw coprocessor_mem=4m@0x40000000,4m@0x40400000
nimsockets=NIM Socket 0:
imageversion=version=0350200905300000
freeram=MemTotal: 117532 kB


ss OK to continue.', 'displaytext': 'Configure interface', 'id': 'nwconfig', 'condition': '', 'timeoutaction': 'nextpage', 'nextstep': None, 'code_async': '', 'codeafter_async': u'self.AdapterSetupEnd(self.selectedInterface)', 'timeoutstep': '', 'list': [], 'timeout': None, 'codeafter': '', 'config': {'screen': <class 'Screens.NetworkSetup.AdapterSetup'>, 'args': 'self.selectedInterface', 'type': 'ConfigList'}}
< 87.783> wizard text Veuillez configurer votre connexion Internet en renseignant les valeurs nécessaires.
Quand vous serez prêt, appuyez sur OK pour continuer.< 87.783>
< 87.785> set LCD text
< 87.787> code self.clearSelectedKeys()
self.selectKey("OK")
self.selectKey("UP")
self.selectKey("DOWN")
self.selectKey("LEFT")
self.selectKey("RIGHT")< 87.787>
< 87.792> selectPic: arrowup
< 87.794> selectPic: arrowdown
< 87.797> selectPic: arrowup2
< 87.800> showing list, 3
< 87.801> self.list: <Components.Sources.List.List object at 0x2e46e58c>
< 87.802> self.list: <Components.Sources.List.List object at 0x2e46e58c>
< 87.802> setZPosition
< 87.814> showing config
< 87.815> wizard screen <class 'Screens.NetworkSetup.AdapterSetup'>
< 88.090> clearConfigList <Components.ConfigList.ConfigList object at 0x2e4731ec> <Components.ConfigList.ConfigList object at 0x2e46e50c>
< 88.091> clearConfigList <Components.ConfigList.ConfigList object at 0x2e46e50c> <Components.ConfigList.ConfigList object at 0x2e46e50c>
< 88.092> Now: 3
< 88.093> Now: 3
< 89.188> down
< 89.685> OK
< 89.686> finished
< 89.687> code self.AdapterSetupEnd(self.selectedInterface)
< 89.689> [ePopen] command: ping -c 1 www.openpli.org (http://www.openpli.org)
< 89.692> [ePopen] command: ping -c 1 www.google.nl (http://www.google.nl)
< 89.698> [ePopen] command: ping -c 1 www.google.com (http://www.google.com)
< 89.825> warning, skin is missing element WarningPixmap in <class 'Screens.MessageBox.MessageBox'>(Veuillez patienter pendant le test de votre réseau...)
< 89.828> [Skin] Error: {skin.xml}: pixmap file /usr/local/share/enigma2/HDMUSlim/icons/attention-53.png not found!. Please contact the skin's author!
< 89.831> [Skin] Error: {skin.xml}: pixmap file /usr/local/share/enigma2/HDMUSlim/icons/info-53.png not found!. Please contact the skin's author!
< 89.835> [Skin] Error: {skin.xml}: pixmap file /usr/local/share/enigma2/HDMUSlim/icons/question-53.png not found!. Please contact the skin's author!
< 89.863> Now: 3
< 109.877> getStepWithID: checklanstatusend
< 109.878> result: 4
< 109.879> Updating values in step 5
< 109.905> keys*******************: ['code', 'text', 'displaytext', 'id', 'condition', 'timeoutaction', 'nextstep', 'code_async', 'codeafter_async', 'timeoutstep', 'list', 'timeout', 'codeafter', 'config']
< 109.906> Updating values in step 6
< 109.908> set LCD text
< 109.911> wizard step: {'code': u'self.clearSelectedKeys()\nself.selectKey("OK")\nself.selectKey("UP")\nself.selectKey("DOWN")', 'text': 'Your internet connection is not working!\nPlease choose what you want to do next.', 'displaytext': 'Please follow the instructions on the TV', 'id': 'checklanstatusend', 'condition': u'self.condition = (self.InterfaceState == False )', 'timeoutaction': 'nextpage', 'nextstep': None, 'code_async': '', 'codeafter_async': '', 'timeoutstep': '', 'list': [('Configure your network again', 'welcome'), ('Exit network wizard', 'end')], 'timeout': None, 'codeafter': '', 'config': {'screen': None, 'args': None, 'type': ''}}
< 109.912> wizard text Votre connexion Internet ne fonctionne pas!
Veuillez choisir ce que vous voulez faire ensuite.< 109.913>
< 109.914> set LCD text
< 109.917> code self.clearSelectedKeys()
self.selectKey("OK")
self.selectKey("UP")
self.selectKey("DOWN")< 109.917>
< 109.922> selectPic: arrowup
< 109.924> selectPic: arrowdown
< 109.927> selectPic: arrowup2
< 109.929> showing list, 6
< 109.930> self.list: <Components.Sources.List.List object at 0x2e46e58c>
< 109.931> self.list: <Components.Sources.List.List object at 0x2e46e58c>
< 109.932> setZPosition
< 109.941> showing config
< 109.944> Now: 6
< 126.605> down
< 127.161> OK
< 127.161> finished
< 127.163> current: ('Quitter assistant r\xc3\xa9seau', 'end')
< 127.165> getStepWithID: end
< 127.166> result: 13
< 127.167> Updating values in step 14
< 127.169> wizard step: {'code': u'self.clearSelectedKeys()\nself.selectKey("OK")', 'text': 'Thank you for using the wizard.\nPlease press OK to continue.', 'id': 'end', 'condition': '', 'timeoutaction': 'nextpage', 'nextstep': None, 'code_async': '', 'codeafter_async': '', 'timeoutstep': '', 'list': [], 'timeout': None, 'codeafter': '', 'config': {'screen': None, 'args': None, 'type': ''}}
< 127.171> wizard text Merci d'utiliser l'assistant.
Veuillez appuyer sur OK pour continuer.< 127.171>
< 127.173> code self.clearSelectedKeys()
self.selectKey("OK")< 127.173>
< 127.177> selectPic: arrowup
< 127.180> showing list, 14
< 127.181> self.list: <Components.Sources.List.List object at 0x2e46e58c>
< 127.182> self.list: <Components.Sources.List.List object at 0x2e46e58c>
< 127.182> setZPosition
< 127.190> showing config
< 127.192> Now: 14
< 127.193> Now: 14
< 128.766> OK
< 128.767> finished
< 128.768> wizard finished
< 128.776> Now: 14
< 128.787> Reading ['startwizard.xml']
< 129.155> getStepWithID: start
< 129.156> result: 0
< 129.162> ('fr_FR', ('Fran\xc3\xa7ais', 'fr', 'FR', 'ISO-8859-15'))
< 129.367> warning, skin is missing element stepslider in <class 'Screens.StartWizard.StartWizard'>
< 129.389> WizardCreateSummary
< 129.412> Updating values in step 1
< 129.414> wizard step: {'code': u'self.clearSelectedKeys()\nself.selectKey("OK")', 'text': 'Welcome.\n\nThis start wizard will guide you through the basic setup of your receiver.\nPress the OK button on your remote control to move to the next step.', 'id': 'start', 'condition': '', 'timeoutaction': 'nextpage', 'nextstep': 'introduction', 'code_async': '', 'codeafter_async': '', 'timeoutstep': '', 'list': [], 'timeout': None, 'codeafter': '', 'config': {'screen': None, 'args': None, 'type': ''}}
< 129.416> wizard text Bienvenue.

Cet assistant de démarrage vous guidera à travers la configuration de base de votre récepteur.
Appuyez sur le bouton OK de votre télécommande pour passer à l'étape suivante.< 129.416>
< 129.418> code self.clearSelectedKeys()
self.selectKey("OK")< 129.418>
< 129.421> selectPic: arrowup
< 129.423> showing list, 1
< 129.424> self.list: <Components.Sources.List.List object at 0x2e45d8ac>
< 129.425> self.list: <Components.Sources.List.List object at 0x2e45d8ac>
< 129.426> setZPosition
< 129.434> showing config
< 131.013> OK
< 131.014> finished
< 131.015> getStepWithID: introduction
< 131.016> result: 1
< 131.017> Updating values in step 2
< 131.019> wizard step: {'code': u'self.clearSelectedKeys()\nself.selectKey("UP")\nself.selectKey("DOWN")', 'text': 'Use the up/down keys on your remote control to select an option. After that, press OK.', 'id': 'introduction', 'condition': '', 'timeoutaction': 'nextpage', 'nextstep': None, 'code_async': '', 'codeafter_async': '', 'timeoutstep': '', 'list': [('Use the wizard to set up basic features', 'network'), ('Exit the wizard', 'end')], 'timeout': None, 'codeafter': '', 'config': {'screen': None, 'args': None, 'type': ''}}
< 131.021> wizard text Utiliser les boutons HAUT et BAS de votre télécommande pour sélectionner une option. Après cela, appuyez sur OK.
< 131.023> code self.clearSelectedKeys()
self.selectKey("UP")
self.selectKey("DOWN")< 131.023>
< 131.027> selectPic: arrowdown
< 131.029> selectPic: arrowup
< 131.032> showing list, 2
< 131.033> self.list: <Components.Sources.List.List object at 0x2e45d8ac>
< 131.034> self.list: <Components.Sources.List.List object at 0x2e45d8ac>
< 131.034> setZPosition
< 131.044> showing config
< 131.045> Now: 2
< 131.047> Now: 2
< 133.590> down
< 134.055> OK
< 134.056> finished
< 134.058> current: ("Quitter l'assistant", 'end')
< 134.059> getStepWithID: end
< 134.061> result: 21
< 134.062> Updating values in step 22
< 134.064> wizard step: {'code': u'self.clearSelectedKeys()\nself.selectKey("OK")', 'text': 'Thank you for using the wizard. Your receiver is now ready for use.\nPress OK to start using your receiver.', 'id': 'end', 'condition': '', 'timeoutaction': 'nextpage', 'nextstep': None, 'code_async': '', 'codeafter_async': '', 'timeoutstep': '', 'list': [], 'timeout': None, 'codeafter': '', 'config': {'screen': None, 'args': None, 'type': ''}, 'laststep': 'true'}
< 134.066> wizard text Merci d'avoir utilisé l'assistant. Votre récepteur est maintenant prêt à être utilisé.
Appuyez sur OK pour commencer à utiliser votre récepteur.< 134.066>
< 134.068> code self.clearSelectedKeys()
self.selectKey("OK")< 134.068>
< 134.072> selectPic: arrowup
< 134.074> showing list, 22
< 134.075> self.list: <Components.Sources.List.List object at 0x2e45d8ac>
< 134.076> self.list: <Components.Sources.List.List object at 0x2e45d8ac>
< 134.077> setZPosition
< 134.085> showing config
< 134.086> Now: 22
< 134.088> Now: 22
< 135.451> OK
< 135.452> finished
< 135.452> wizard finished
< 135.671> Now: 22
< 135.691> [SKIN] Parsing embedded skin <embedded-in-'Screensaver'>
< 136.941> [SKIN] No skin to read...
< 137.224> warning, skin is missing element boquet in <class 'Screens.ChannelSelection.ChannelSelection'>
< 137.656> [SKIN] No skin to read...
< 137.723> warning, skin is missing element From in <class 'Screens.Dish.Dish'>
< 137.725> warning, skin is missing element Goto in <class 'Screens.Dish.Dish'>
< 137.727> warning, skin is missing element tunerName in <class 'Screens.Dish.Dish'>
< 137.729> warning, skin is missing element turnSpeed in <class 'Screens.Dish.Dish'>
< 137.731> warning, skin is missing element posGoto in <class 'Screens.Dish.Dish'>
< 137.733> warning, skin is missing element posFrom in <class 'Screens.Dish.Dish'>
< 137.743> warning, skin is missing element turnTime in <class 'Screens.Dish.Dish'>
< 137.907> RemovePopup, id = ZapError
< 148.541> playing 1:0:19:283D:3FB:1:C00000:0:0:0:
< 148.546> getResolvedKey config.usage.remote_fallback failed !! (Typo??)
< 148.599> not pauseable.
< 148.604> not pauseable.
< 148.609> not pauseable.
< 148.615> RemovePopup, id = ZapError
< 148.621> RemovePopup, id = ZapError
< 148.622> AddPopup, id = ZapError
< 148.739> warning, skin is missing element WarningPixmap in <class 'Screens.MessageBox.MessageBox'>(Service indisponible!
Vérifier la configuration du tuner!)< 148.740>
< 148.742> [Skin] Error: {skin.xml}: pixmap file /usr/local/share/enigma2/HDMUSlim/icons/attention-53.png not found!. Please contact the skin's author!
< 148.746> [Skin] Error: {skin.xml}: pixmap file /usr/local/share/enigma2/HDMUSlim/icons/info-53.png not found!. Please contact the skin's author!
< 148.750> [Skin] Error: {skin.xml}: pixmap file /usr/local/share/enigma2/HDMUSlim/icons/question-53.png not found!. Please contact the skin's author!
< 160.424> Creating setup
< 160.466> warning, skin is missing element key_yellow in <class 'Screens.Satconfig.NimSetup'>
< 160.468> warning, skin is missing element key_blue in <class 'Screens.Satconfig.NimSetup'>
< 160.470> warning, skin is missing element key_green in <class 'Screens.Satconfig.NimSetup'>
< 160.473> warning, skin is missing element key_red in <class 'Screens.Satconfig.NimSetup'>
< 161.839> Creating setup
< 162.410> Creating setup
< 173.800> [SecConfigure] sec config cleared
< 173.804> [SecConfigure] slot: 0 configmode: simple
< 173.805> [SecConfigure] diseqcmode: diseqc_a_b
< 173.810> [SecConfigure] sec config completed
< 173.841> playing None
< 175.364> Creating setup
< 175.408> warning, skin is missing element key_yellow in <class 'Screens.Satconfig.NimSetup'>
< 175.410> warning, skin is missing element key_blue in <class 'Screens.Satconfig.NimSetup'>
< 175.412> warning, skin is missing element key_green in <class 'Screens.Satconfig.NimSetup'>
< 175.414> warning, skin is missing element key_red in <class 'Screens.Satconfig.NimSetup'>
< 176.740> playing None
< 178.206> no Service found
< 178.710> no Service found
< 179.194> no Service found
< 181.741> playing 1:0:19:2B66:3F3:1:C00000:0:0:0:
< 181.745> getResolvedKey config.usage.remote_fallback failed !! (Typo??)
< 181.781> not pauseable.
< 181.789> not pauseable.
< 181.795> not pauseable.
< 181.801> RemovePopup, id = ZapError
< 182.604> RemovePopup, id = ZapError
< 182.958> [eDVBPESReader] Created. Opening demux
< 182.958> [eDVBPESReader] Created. Opening demux
< 183.128> [Dish] tuning failed
< 183.409> [__evUpdatedEventInfo]
< 183.484> [NetworkBrowser] fallback to default translation for NetworkBrowser
< 183.498> [NetworkBrowser] fallback to default translation for Search for network shares
< 183.515> [NetworkBrowser] fallback to default translation for MountManager
< 183.531> [NetworkBrowser] fallback to default translation for Manage network shares
< 184.005> Plugin Extensions/WebInterface failed to load: No module named plugin
< 184.132> AT plugin not found
< 184.140> SerienRecorder plugin not found
< 184.141> ER plugin not found
< 184.151> [OpenWebif] no plugins to load
< 184.168> [OpenWebif] failed to listen on Port 80
< 190.283> playing 1:0:19:132F:3EF:1:C00000:0:0:0:
< 190.650> getResolvedKey config.usage.remote_fallback failed !! (Typo??)
< 190.690> not pauseable.
< 190.696> not pauseable.
< 190.703> not pauseable.
< 190.709> RemovePopup, id = ZapError
< 191.078> [eDVBPESReader] Created. Opening demux
< 191.079> [eDVBPESReader] Created. Opening demux
< 191.119> RemovePopup, id = ZapError
< 191.627> [Dish] tuning failed
< 191.932> [__evUpdatedEventInfo]
< 196.451> playing 1:0:19:33F6:3ED:1:C00000:0:0:0:
< 196.690> getResolvedKey config.usage.remote_fallback failed !! (Typo??)
< 196.727> not pauseable.
< 196.733> not pauseable.
< 196.738> not pauseable.
< 196.744> RemovePopup, id = ZapError
< 197.119> [eDVBPESReader] Created. Opening demux
< 197.119> [eDVBPESReader] Created. Opening demux
< 197.156> RemovePopup, id = ZapError
< 197.665> [Dish] tuning failed
< 198.658> [__evUpdatedEventInfo]
< 201.631> playing 1:0:19:283D:3FB:1:C00000:0:0:0:
< 201.875> getResolvedKey config.usage.remote_fallback failed !! (Typo??)
< 201.916> not pauseable.
< 201.923> not pauseable.
< 201.928> not pauseable.
< 201.934> RemovePopup, id = ZapError
< 202.304> [eDVBPESReader] Created. Opening demux
< 202.305> [eDVBPESReader] Created. Opening demux
< 202.353> RemovePopup, id = ZapError
< 202.870> [Dish] tuning failed
< 203.478> [__evUpdatedEventInfo]
< 206.245> setValue 45
< 206.591> setValue 40
< 206.969> setValue 35
< 207.253> setValue 30
< 214.527> Traceback (most recent call last):
< 214.529> File "usr/lib/enigma2/python/Components/ActionMap.py", line 66, in action
< 214.532> File "usr/lib/enigma2/python/Components/ActionMap.py", line 46, in action
< 214.533> File "usr/lib/enigma2/python/Screens/Menu.py", line 60, in okbuttonClick
< 214.536> File "usr/lib/enigma2/python/Tools/BoundFunction.py", line 9, in __call__
< 214.538> File "/usr/lib/enigma2/python/mytest.py", line 235, in openWithCallback
< 214.540> dlg = self.open(screen, *arguments, **kwargs)
< 214.541> File "/usr/lib/enigma2/python/mytest.py", line 245, in open
< 214.552> dlg = self.current_dialog = self.instantiateDialog(screen, *arguments, **kwargs)
< 214.554> File "/usr/lib/enigma2/python/mytest.py", line 188, in instantiateDialog
< 214.557> return self.doInstantiateDialog(screen, arguments, kwargs, self.desktop)
< 214.558> File "/usr/lib/enigma2/python/mytest.py", line 205, in doInstantiateDialog
< 214.560> dlg = screen(self, *arguments, **kwargs)
< 214.560> File "usr/lib/enigma2/python/Screens/Menu.py", line 175, in __init__
< 214.561> File "usr/lib/enigma2/python/Screens/Menu.py", line 154, in addItem
< 214.562> File "usr/lib/enigma2/python/Screens/Setup.py", line 147, in getSetupTitle
< 214.564> Screens.Setup.SetupError: unknown setup id ''remotecontrolsetup''!

[souhai]

hello I have a craslog : setup => systeme
HDMU_15083_E2_1008g+se+_217_git_4129


HDMU Enigma2 crash log

crashdate=Sun May 22 13:21:44 2016
compiledate=May 22 2016
skin=skin.xml
sourcedate=May 22 2016
branch=(no branch)
rev=
component=Enigma2

stbmodel=hs7810a
stbmodel=hs7810a
kernelcmdline=console=ttyAS0,115200 root=/dev/root rw nwhwconf=$nwhwnet init=/bin/devinit coprocessor_mem=4m@0x40000000,4m@0x40400000
nimsockets=NIM Socket 0:
imageversion=version=0350200905300000
freeram=MemTotal: 117532 kB


< 607.680> [HardwareInfo] Scanning hardware info
< 608.141> Detected: hs7810a
< 608.173> [Harddisk] enumerating block devices...
< 608.265> [Harddisk] new device sda -> /dev/sda -> /dev/sda
< 610.188> [SecConfigure] sec config cleared
< 610.192> [SecConfigure] slot: 0 configmode: simple
< 610.194> [SecConfigure] diseqcmode: single
< 610.195> [SecConfigure] sec config completed
< 615.137> [ML] BlurayPlayer not installed: cannot import name BlurayPlayer
< 619.495> [iInputDevices] getInputDevices event2 <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/event2' >
< 619.497> [iInputDevices] getInputDevices event0 <ERROR: ioctl(EVIOCGNAME): [Errno 22] Invalid argument >
< 619.499> [iInputDevices] getInputDevices mice <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropriate ioctl for device >
< 619.500> [iInputDevices] getInputDevices mouse0 <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse0' >
< 619.501> [iInputDevices] getInputDevices js0 <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js0' >
< 619.502> [iInputDevices] getInputDevices js3 <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js3' >
< 619.503> [iInputDevices] getInputDevices mouse1 <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse1' >
< 619.505> [iInputDevices] getInputDevices js2 <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js2' >
< 619.506> [iInputDevices] getInputDevices mouse2 <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse2' >
< 619.507> [iInputDevices] getInputDevices mouse3 <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse3' >
< 619.508> [iInputDevices] getInputDevices event3 <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/event3' >
< 619.509> [iInputDevices] getInputDevices event1 <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/event1' >
< 619.511> [iInputDevices] getInputDevices js1 <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js1' >
< 619.577> Selected keymap does not exist!
< 619.580> Activating language Français
< 621.724> [keymapparser] keymap file /usr/local/share/enigma2/keytranslation.xml not found
< 621.741> [ePopen] command: ip -o addr show dev eth0
< 621.958> LINE # automatically generated by enigma 2
< 621.959> LINE
< 621.960> [AutoMount.py] self.automounts without mounts {}
< 621.991> [NetworkBrowser] fallback to default translation for NetworkBrowser
< 622.002> [NetworkBrowser] fallback to default translation for Search for network shares
< 622.012> [NetworkBrowser] fallback to default translation for MountManager
< 622.023> [NetworkBrowser] fallback to default translation for Manage network shares
< 622.329> [VideoHardware] getModeList for port Scart
< 622.332> [VideoHardware] getModeList for port Component
< 622.338> [VideoHardware] getModeList for port Scart
< 622.341> [VideoHardware] getModeList for port HDMI
< 622.349> [VideoHardware] getModeList for port HDMI-PC
< 622.353> [VideoHardware] hotplug on dvi
< 622.384> [VideoHardware] setMode - port: Scart mode: PAL rate: 50Hz
< 622.589> updateColor: Scart
< 624.457> :0: UserWarning: You do not have a working installation of the service_identity module: 'No module named service_identity'. Please install it from <https://pypi.python.org/pypi/service_identity> and make sure all of its dependencies are satisfied. Without the service_identity module and a recent enough pyOpenSSL to support it, Twisted can perform only rudimentary TLS client hostname verification. Many valid certificate/hostname mappings may be rejected.
< 632.197> Plugin Extensions/WebInterface failed to load: No module named plugin
< 632.336> [SKIN] Parsing embedded skin <embedded-in-'Screensaver'>
< 635.435> [SKIN] No skin to read...
< 635.711> warning, skin is missing element boquet in <class 'Screens.ChannelSelection.ChannelSelection'>
< 635.871> [SKIN] No skin to read...
< 635.936> warning, skin is missing element From in <class 'Screens.Dish.Dish'>
< 635.938> warning, skin is missing element Goto in <class 'Screens.Dish.Dish'>
< 635.941> warning, skin is missing element tunerName in <class 'Screens.Dish.Dish'>
< 635.943> warning, skin is missing element turnSpeed in <class 'Screens.Dish.Dish'>
< 635.945> warning, skin is missing element posGoto in <class 'Screens.Dish.Dish'>
< 635.947> warning, skin is missing element posFrom in <class 'Screens.Dish.Dish'>
< 635.955> warning, skin is missing element turnTime in <class 'Screens.Dish.Dish'>
< 636.119> RemovePopup, id = ZapError
< 636.586> [SKIN] Parsing embedded skin <embedded-in-'Mute'>
< 636.605> setValue 50
< 636.850> [ePopen] command: route -n | grep eth0
< 636.879> 192.168
< 636.880> 0.0.0.0
< 636.905> nameservers: [[192, 168, 1, 1], [192, 168, 1, 1]]
< 636.906> read configured interface: {'lo': {'dhcp': False}, 'wlan0': {'dhcp': True}, 'eth0': {'dhcp': True}}
< 636.907> self.ifaces after loading: {'eth0': {'preup': False, 'predown': False, 'ip': [192, 168, 1, 35], 'up': True, 'mac': 'fa:92:f0:39:22:63', 'dhcp': True, 'bcast': [192, 168, 1, 255], 'netmask': [255, 255, 255, 0], 'gateway': [192, 168, 1, 1]}}
< 636.921> AT plugin not found
< 636.922> SerienRecorder plugin not found
< 636.924> ER plugin not found
< 636.935> [OpenWebif] no plugins to load
< 636.977> [OpenWebif] started on 80
< 667.514> Creating setup
< 667.556> warning, skin is missing element key_yellow in <class 'Screens.Satconfig.NimSetup'>
< 667.558> warning, skin is missing element key_blue in <class 'Screens.Satconfig.NimSetup'>
< 667.560> warning, skin is missing element key_green in <class 'Screens.Satconfig.NimSetup'>
< 667.562> warning, skin is missing element key_red in <class 'Screens.Satconfig.NimSetup'>
< 669.200> Creating setup
< 671.237> Creating setup
< 672.094> Creating setup
< 672.430> Creating setup
< 672.972> Creating setup
< 673.952> Creating setup
< 674.794> Creating setup
< 675.494> Creating setup
< 675.796> Creating setup
< 676.093> Creating setup
< 676.386> Creating setup
< 676.640> Creating setup
< 676.982> Creating setup
< 677.361> Creating setup
< 677.673> Creating setup
< 677.989> Creating setup
< 678.292> Creating setup
< 678.591> Creating setup
< 678.852> Creating setup
< 679.165> Creating setup
< 679.479> Creating setup
< 679.764> Creating setup
< 680.220> Creating setup
< 680.852> Creating setup
< 681.608> Creating setup
< 682.923> Creating setup
< 683.744> Creating setup
< 684.426> Creating setup
< 685.162> Creating setup
< 685.940> [SecConfigure] sec config cleared
< 685.944> [SecConfigure] slot: 0 configmode: advanced
< 685.954> [SecConfigure] add 130 to 1
< 685.958> [SecConfigure] add 192 to 1
< 686.065> [SecConfigure] add 3530 to 1
< 686.067> [SecConfigure] add 3550 to 1
< 686.084> [SecConfigure] sec config completed
< 686.222> playing None
< 691.087> no Service found
< 691.678> no Service found
< 692.321> no Service found
< 698.490> playing 1:0:1:51C:D:800:DCA0000:0:0:0:
< 698.511> getResolvedKey config.usage.remote_fallback failed !! (Typo??)
< 698.617> not pauseable.
< 698.623> not pauseable.
< 698.629> not pauseable.
< 698.634> RemovePopup, id = ZapError
< 699.092> [eDVBPESReader] Created. Opening demux
< 699.093> [eDVBPESReader] Created. Opening demux
< 699.221> RemovePopup, id = ZapError
< 699.534> [NetworkBrowser] fallback to default translation for NetworkBrowser
< 699.548> [NetworkBrowser] fallback to default translation for Search for network shares
< 699.560> [NetworkBrowser] fallback to default translation for MountManager
< 699.571> [NetworkBrowser] fallback to default translation for Manage network shares
< 699.742> [Dish] tuning failed
< 699.866> Plugin Extensions/WebInterface failed to load: No module named plugin
< 699.958> AT plugin not found
< 699.960> SerienRecorder plugin not found
< 699.962> ER plugin not found
< 699.968> [OpenWebif] no plugins to load
< 700.004> [OpenWebif] failed to listen on Port 80
< 701.229> [__evUpdatedEventInfo]
< 701.688> setValue 45
< 702.085> setValue 40
< 702.387> setValue 35
< 702.644> setValue 30
< 702.980> setValue 25
< 703.300> setValue 20
< 708.460> playing 1:0:1:3:2A94:55E:DCA0000:0:0:0:
< 708.761> getResolvedKey config.usage.remote_fallback failed !! (Typo??)
< 708.797> not pauseable.
< 708.803> not pauseable.
< 708.808> not pauseable.
< 708.814> RemovePopup, id = ZapError
< 709.111> RemovePopup, id = ZapError
< 709.383> [eDVBPESReader] Created. Opening demux
< 709.384> [eDVBPESReader] Created. Opening demux
< 709.621> [Dish] tuning failed
< 709.953> [__evUpdatedEventInfo]
< 727.694> Traceback (most recent call last):
< 727.695> File "usr/lib/enigma2/python/Components/ActionMap.py", line 66, in action
< 727.696> File "usr/lib/enigma2/python/Components/ActionMap.py", line 46, in action
< 727.697> File "usr/lib/enigma2/python/Screens/Menu.py", line 60, in okbuttonClick
< 727.698> File "usr/lib/enigma2/python/Tools/BoundFunction.py", line 9, in __call__
< 727.699> File "/usr/lib/enigma2/python/mytest.py", line 235, in openWithCallback
< 727.701> dlg = self.open(screen, *arguments, **kwargs)
< 727.702> File "/usr/lib/enigma2/python/mytest.py", line 245, in open
< 727.703> dlg = self.current_dialog = self.instantiateDialog(screen, *arguments, **kwargs)
< 727.704> File "/usr/lib/enigma2/python/mytest.py", line 188, in instantiateDialog
< 727.705> return self.doInstantiateDialog(screen, arguments, kwargs, self.desktop)
< 727.710> File "/usr/lib/enigma2/python/mytest.py", line 205, in doInstantiateDialog
< 727.712> dlg = screen(self, *arguments, **kwargs)
< 727.713> File "usr/lib/enigma2/python/Screens/Menu.py", line 175, in __init__
< 727.713> File "usr/lib/enigma2/python/Screens/Menu.py", line 154, in addItem
< 727.714> File "usr/lib/enigma2/python/Screens/Setup.py", line 147, in getSetupTitle
< 727.716> Screens.Setup.SetupError: unknown setup id ''remotecontrolsetup''!

[dreamce]

spark 7111 hdmu 15083 mainmenu sisteme setup problem