new HDMU 15084

[samkooke]

hello all new hdmu 15084 no new plugin found

[rater]

all it s ok

[tom_63]

U-Boot 1.3.1 (Oct 24 2008 - 18:17:25) - stm23-2008-03-19
Board: cuberevo-mini II (0x2D42C041)
Board: 14 dotmatrix vfd front
DRAM: 128 MB
Flash: 32 MB
In: serial
Out: serial
Err: serial
Reserve 0x2010000 bytes from 0xa5ff0000 for DGS upgrade buffer.
Saving Environment to Flash...
Un-Protected 1 sectors
Erasing Flash...
.
Erased 1 sectors
Writing to Flash... done
Protected 1 sectors
(Re)start USB...
USB: scanning bus for devices... 2 USB Device(s) found
scanning bus for storage devices... 1 Storage Device(s) found
1900660 bytes read
## Booting image at a5ff0000 ...
Image Name: Linux-2.6.32.61_stm24_0217
Image Type: SuperH Linux Kernel Image (gzip compressed)
Data Size: 1900596 Bytes = 1.8 MB
Load Address: 84001000
Entry Point: 84002000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Warning: Unable to determine if kernel is built for 29- or 32-bit mode!
Starting kernel console=ttyAS1,115200 panic=3 root=/dev/sdb1 rw rootdelay=10 init=/bin/devinit ip=192.168.1.3:192.168.1.254:192.168.1.254:255.255 .255.0 mem=128m coprocessor_mem=4m@0x10000000,4m@0x10400000 - 0x00000000 - 0 ...
INIT: version 2.88 booting
init frontpanel
WAIT 1 min
[mountvirtfs] Seems to be the first run - Making devices in /dev...
[makedev] Starting makedev...
CI-slot(s) : Yes
Tuners : 1
HDMI CEC : No
[makedev] done.
[mountvirtfs] Mount /dev in tmpfs
[mountvirtfs] Copying device nodes to /dev
Starting portmap daemon....
Loading autofs
Starting autofs
[mountall] Mounting local filesystems...
Cleaning /tmp /var/run /var/lock.
Hostname: IPBOX910.
init stmfb
offset key len data
found key tvmode ->value 2
720P-50
LOADING MODULES
load firmware
copLoadFile (file /boot/audio.elf)
ustslave: Kernel Version: 24
base_address 0x10400000
seeking to 0
seeking to 5f00
seeking to 12320
seeking to 1aa20
seeking to 173100
seeking to 173138
seeking to 173170
seeking to 1b9058
seeking to 1b9060
seeking to 1b9068
seeking to 1b9070
seeking to 1d0920
seeking to 1d0a00
copLoadFile (file /boot/video.elf)
ustslave: Kernel Version: 24
base_address 0x10000000
seeking to 0
seeking to 1277c0
seeking to 1277f8
seeking to 127830
seeking to 14d558
seeking to 14d564
seeking to 14d570
seeking to 17df30
seeking to 180000
init embx
init AVS
skip insmod tuner
Model: 'cuberevo-mini2'
vBoxType: 12
Input device name: "TDT RC event driver"
Selected Remote: Cuberevo RemoteControl
RemoteControl Map:
KEY_F1 - 00 - 59
KEY_F2 - 01 - 60
KEY_F3 - 02 - 61
INFO - 03 - 358
TV/RADIO - 04 - 378
PREVIOUS - 05 - 412
EPG - 06 - 365
RECORD - 07 - 167
FAVORITES - 08 - 364
MEDIA - 09 - 226
STANDBY - 0A - 116
KEY_F5 - 0B - 63
MUTE - 0C - 113
ARCHIVE - 0D - 361
0BUTTON - 10 - 11
1BUTTON - 11 - 2
2BUTTON - 12 - 3
3BUTTON - 13 - 4
4BUTTON - 14 - 5
5BUTTON - 15 - 6
6BUTTON - 16 - 7
7BUTTON - 17 - 8
8BUTTON - 18 - 9
9BUTTON - 19 - 10
UP - 1A - 103
DOWN - 1B - 108
RIGHT - 1C - 106
LEFT - 1D - 105
REWIND - 1E - 168
OK - 1F - 352
PLAY - 20 - 207
FASTFORWARD - 21 - 208
STOP - 22 - 128
SLOW - 23 - 409
BACK - 24 - 158
PAUSE - 25 - 119
MENU - 26 - 139
EXIT - 27 - 174
KEY_F7 - 28 - 65
KEY_BOOMARKS - 29 - 156
RED - 2A - 398
BLUE - 2B - 401
KEY_F8 - 2C - 66
GREEN - 2D - 399
YELLOW - 2E - 400
AUDIO - 2F - 392
SUBTITLE - 30 - 370
TEXT - 31 - 388
CHANNELUP - 32 - 402
CHANNELDOWN - 33 - 403
VOLUMEUP - 34 - 115
VOLUMEDOWN - 35 - 114
WWW - 36 - 150
Supports Long KeyPress: 1
processComplex >
period 10, delay 140
micom version = 2
Using period=10 delay=140
[SEM] DOWN
[mountall] Mounting local filesystems...
showSinglePic /boot/bootlogo.mvi
VIDEO_SELECT_SOURCE MEMORY (Success)
VIDEO_PLAY (Success)
VIDEO_CONTINUE: (Success)
VIDEO_CLEAR_BUFFER: (Invalid argument)
Deconfiguring network interfaces... ifdown: interface lo not configured
ifdown: interface eth0 not configured
ifdown: interface wlan0 not configured
done.
Setting up IP spoofing protection: rp_filter.
Configuring network interfaces... ip: RTNETLINK answers: File exists
udhcpc (v1.24.1) started
Sending discover...
Sending select for 10.79.0.210...
Lease of 10.79.0.210 obtained, lease time 864000
route: SIOCDELRT: No such process
adding dns 10.79.0.30
ip: SIOCGIFFLAGS: No such device
done.
[set_was_timer_wakeup] error reading /etc/enigma2/timers.xml
[set_was_timer_wakeup] no timer aktiv
starting e2->
Simple mixer control 'Analog',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback -31 - 31
Mono: Playback 6 [60%] [on]
Simple mixer control 'SPDIF',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback -31 - 31
Mono: Playback 6 [60%] [on]
Simple mixer control 'HDMI',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback -31 - 31
Mono: Playback 6 [60%] [on]
rm: can't remove '/media/USB/RECORD': No such file or directory
(enigma2:5867): GStreamer-WARNING **: External plugin loader failed. This most likely means that the plugin loader helper binary was not found or could not be run. You might need to set the GST_PLUGIN_SCANNER environment variable if your setup is unusual. This should normally not be required though.
PYTHONPATH: /usr/lib/enigma2/python
DVB_API_VERSION 5 DVB_API_VERSION_MINOR 3
ENIGMA2_DEBUG settings: Level=3
[MAIN] executing main
no profile data available
< 164.522> [HardwareInfo] Scanning hardware info
< 164.533> Detected: cuberevo-mini2
< 164.585> [Harddisk] enumerating block devices...
< 164.780> [Harddisk] new device sda -> /dev/sda -> /dev/sda
< 164.783> [ePopen] command: ('sdparm', 'sdparm', '--set=SCT=0', '/dev/sda')
< 164.791> [ePopen] command: ('sdparm', 'sdparm', '-C stop', '/dev/sda')
< 164.891> [Harddisk] new device sdb -> /dev/sdb -> /dev/sdb
< 169.671> [SecConfigure] sec config cleared
< 169.679> [SecConfigure] slot: 0 configmode: simple
< 169.682> [SecConfigure] diseqcmode: single
< 169.684> [SecConfigure] sec config completed
< 170.588> [Picon] adding path: /media/hdd/picon/
< 175.579> [ML] BlurayPlayer not installed: cannot import name BlurayPlayer
< 176.636> [InfoBar] Failed to load resumepoints: [Errno 2] No such file or directory: '/etc/enigma2/resumepoints.pkl'
libpng warning: iCCP: known incorrect sRGB profile
libpng warning: iCCP: cHRM chunk does not match sRGB
libpng warning: iCCP: known incorrect sRGB profile
libpng warning: iCCP: cHRM chunk does not match sRGB
< 186.914> [iInputDevices] getInputDevices mice <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mice' >
< 186.916> [iInputDevices] getInputDevices event3 <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/event3' >
< 186.918> [iInputDevices] getInputDevices mouse3 <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse3' >
< 186.920> [iInputDevices] getInputDevices js3 <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js3' >
< 186.922> [iInputDevices] getInputDevices event2 <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/event2' >
< 186.924> [iInputDevices] getInputDevices mouse2 <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse2' >
< 186.926> [iInputDevices] getInputDevices js2 <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js2' >
< 186.928> [iInputDevices] getInputDevices event1 <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/event1' >
< 186.930> [iInputDevices] getInputDevices mouse1 <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse1' >
< 186.932> [iInputDevices] getInputDevices js1 <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js1' >
< 186.934> [iInputDevices] getInputDevices event0 <ERROR: ioctl(EVIOCGNAME): [Errno 22] Invalid argument >
< 186.936> [iInputDevices] getInputDevices mouse0 <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse0' >
< 186.939> [iInputDevices] getInputDevices js0 <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js0' >
< 187.052> Selected keymap does not exist!
< 187.056> Activating language English
< 190.150> [keymapparser] keymap file /usr/local/share/enigma2/keytranslation.xml not found
< 190.172> [ePopen] command: ip -o addr show dev eth0
< 191.911> :0: UserWarning: You do not have a working installation of the service_identity module: 'No module named service_identity'. Please install it from <https://pypi.python.org/pypi/service_identity> and make sure all of its dependencies are satisfied. Without the service_identity module and a recent enough pyOpenSSL to support it, Twisted can perform only rudimentary TLS client hostname verification. Many valid certificate/hostname mappings may be rejected.
< 194.023> [VideoHardware] getModeList for port Scart
< 194.028> [VideoHardware] getModeList for port Component
< 194.041> [VideoHardware] getModeList for port Scart
< 194.046> [VideoHardware] getModeList for port HDMI
< 194.058> [VideoHardware] getModeList for port HDMI-PC
< 194.064> [VideoHardware] hotplug on dvi
< 194.126> [VideoHardware] setMode - port: Component mode: 720p rate: 50Hz
< 194.307> updateColor: Component
< 194.686> LINE # automatically generated by enigma 2
< 194.687> LINE
< 194.689> [AutoMount.py] self.automounts without mounts {}
< 194.753> [NetworkBrowser] fallback to default translation for NetworkBrowser
< 194.771> [NetworkBrowser] fallback to default translation for Search for network shares
< 194.789> [NetworkBrowser] fallback to default translation for MountManager
< 194.806> [NetworkBrowser] fallback to default translation for Manage network shares
< 208.808> EXCEPTION IN PYTHON STARTUP CODE:
< 208.809> ------------------------------------------------------------
< 208.810> Traceback (most recent call last):
< 208.811> File "/usr/lib/enigma2/python/mytest.py", line 527, in <module>
< 208.818> runScreenTest()
< 208.819> File "/usr/lib/enigma2/python/mytest.py", line 388, in runScreenTest
< 208.820> session = Session(desktop = enigma.getDesktop(0), summary_desktop = enigma.getDesktop(1), navigation = nav)
< 208.821> File "/usr/lib/enigma2/python/mytest.py", line 132, in __init__
< 208.822> self.screen = SessionGlobals(self)
< 208.823> File "usr/lib/enigma2/python/Screens/SessionGlobals.py", line 26, in __init__
< 208.833> File "usr/lib/enigma2/python/Components/Sources/HddState.py", line 29, in __init__
< 208.842> File "usr/lib/enigma2/python/Components/Sources/HddState.py", line 99, in isHDD
< 208.855> AttributeError: Harddisk instance has no attribute 'card'
< 208.859> ------------------------------------------------------------
Killed
e2 ended <- RTV: 137
*
INIT: Switching to runlevel: 6
starting e2->
INIT: Sending processes the TERM signal
Sending all processes the TERM signal...done.
Sending all processes the KILL signal...done.
Deactivating swap...umount: tmpfs busy - remounted read-only
swapoff: can't stat 'LABEL=SWAPPART': No such file or directory
done.
Unmounting local filesystems...umount: tmpfs busy - remounted read-only
done.
Rebooting... init


Same problem as before: boot-Loop

[samkooke]

hello all thanks Mister bonkel version 15085 is work.

[tom_63]

auch bei meiner IPBOX 910HD alles ok mit Release 15085.
Viele Dank für deine unermüdliche Arbeit an den Images.

Gruss TOM