HDMU 15671 Image funktioniert nicht richtig

[Spacie32]

Das neue HDMU 15671 Image geht nicht richtig.
Fernbedienung reagiert überhaupt nicht, OpenWebif Remote funktioniert.
Und Tuner geht auch nicht.

Gruß Oliver

[Spacie32]

Oder mach ich etwas falsch?
Hab jetzt mein altes Image wieder drauf und da geht alles.

Gruß Oliver

[neipe]

die aktuellen Images haben Probs, wir sind drann.
Also du machst nix falsch.

Nur ein bissl geduld

[Spacie32]

Super, danke für die Antwort.

[bonkel]

Log wäre gut

[Alex23]

Da die Fernbedienung nicht geht kann ich auch die Ersteinrichtung nicht beenden. Ich habe jetzt nur ein Log vom Start, weiter komme ich ja nicht. Vielleicht hilft es euch ja weiter. Bei Fernbedienungseingaben leuchtet zwar das Fernbedienungs-Element im Frontpanel, aber im Log wird nichts davon ausgegeben.

#Log file from Morlys SH4 STB Admin Tool from: Sa Dez 3 2016, 17:04:07

ToFiÿ
<<< Loader L23231>>>
?ToFi"Z¿?¿Z[!p

Board: TF7700 [29-bit mode]



U-Boot 1.3.1-gfeb9b4b7-dirty (Oct 23 2011 - 12:43:54) - stm23_0043

DRAM: 128 MiB
NOR: 8 MiB
In: serial
Out: serial
Err: serial
Hit any key to stop autoboot: 1 0
(Re)start USB...
USB: scanning bus for devices... 1 USB Device(s) found
scanning bus for storage devices... 0 Storage Device(s) found
** Can't read from device 0 **

** Unable to use usb 0:1 for fatload **
## Booting image at 85000000 ...
Bad Magic Number
## Booting image at 80060000 ...
Image Name: Linux-2.6.32.71_stm24_0217
Image Type: SuperH Linux Kernel Image (gzip compressed)
Data Size: 1789352 Bytes = 1.7 MiB
Load Address: 84001000
Entry Point: 84002000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK

Starting kernel console=ttyAS0,115200 root=/dev/sda1 rw init=/bin/devinit ip=192.168.178.100:::255.255.255.0:tf7700:eth0:off mem=128m coprocessor_mem=4m@0x10000000,4m@0x10400000 rootdelay=6 nwhwconf=device:eth0,hwaddr:00:3e:9e:53:7d:9e - 0x00000000 - 0 ...


INIT: version 2.88 booting

init frontpanel
fsck.jfs version 1.1.15, 04-Mar-2011
processing started: 12/3/2016 16:57:38
The current device is: /dev/sda3


The superblock does not describe a correct jfs file system.

If device /dev/sda3 is valid and contains a jfs file system,
then both the primary and secondary superblocks are corrupt
and cannot be repaired, and fsck cannot continue.

Otherwise, make sure the entered device /dev/sda3 is correct.

[mountvirtfs] Mount /dev in tmpfs
[mountvirtfs] Copying device nodes to /dev
Starting portmap daemon....
Loading autofs
Starting autofs
[mountall] Mounting local filesystems...
Cleaning /tmp.
Hostname: TOPF.
init stmfb
LOADING MODULES
load firmware
copLoadFile (file /boot/audio.elf)
ustslave: Kernel Version: 24
base_address 0x10400000
seeking to 0
seeking to 5f00
seeking to 12320
seeking to 1aa20
seeking to 173100
seeking to 173138
seeking to 173170
seeking to 1b9058
seeking to 1b9060
seeking to 1b9068
seeking to 1b9070
seeking to 1d0920
seeking to 1d0a00
copLoadFile (file /boot/video.elf)
ustslave: Kernel Version: 24
base_address 0x10000000
seeking to 0
seeking to 1277c0
seeking to 1277f8
seeking to 127830
seeking to 14d558
seeking to 14d564
seeking to 14d570
seeking to 17df30
seeking to 180000
init embx
init AVS
insmod: /lib/modules/smartcard.ko: module not found
/etc/init.d/rcS: line 667: /bin/tffpctl: not found
/etc/init.d/rcS: line 667: tffpctl: not found
[mountall] Mounting local filesystems...
Model: 'tf7700hdpvr'
vBoxType: 5
Input device name: "TDT RC event driver"
Selected Remote: Tf7700 RemoteControl
RemoteControl Map:
STANDBY - 0A - 116
MUTE - 0C - 113
ZOOM - 42 - 372
VMODE - 43 - 47
AUDIO - 08 - 392
0BUTTON - 10 - 11
1BUTTON - 11 - 2
2BUTTON - 12 - 3
3BUTTON - 13 - 4
4BUTTON - 14 - 5
5BUTTON - 15 - 6
6BUTTON - 16 - 7
7BUTTON - 17 - 8
8BUTTON - 18 - 9
9BUTTON - 19 - 10
BACK - 1E - 158
INFO - 1D - 358
SEARCH - 05 - 217
SUBTITLE - 07 - 370
TEXT - 47 - 388
DOWN/P- - 01 - 108
UP/P+ - 00 - 103
RIGHT/V+ - 02 - 106
LEFT/V- - 03 - 105
OK/LIST - 1F - 352
MENU - 1A - 139
GUIDE - 1B - 365
EXIT - 1C - 102
FAV - 09 - 364
RED - 4D - 398
GREEN - 0D - 399
YELLOW - 0E - 400
BLUE - 0F - 401
REWIND - 45 - 168
PAUSE - 06 - 119
PLAY - 46 - 207
FASTFORWARD - 48 - 208
RECORD - 4B - 167
STOP - 4A - 128
SLOWMOTION - 49 - 409
RECORDLIST - 51 - 395
SAT - 5E - 381
STEPBACK - 50 - 412
STEPFORWARD - 52 - 407
BOOKMARKS - 4C - 156
TV/RADIO - 04 - 378
MEDIA - 40 - 226
TIMER - 44 - 362
Frontpanel Map:
CHANNELDOWN - 02 - 109
CHANNELUP - 03 - 104
VOLUMEDOWN - 01 - 114
VOLUMEUP - 06 - 115
STANDBY - 0C - 116
Supports Long KeyPress: 1
processComplex >
period 110, delay 10
Using period=110 delay=10
[SEM] DOWN
showSinglePic /boot/bootlogo.mvi
VIDEO_SELECT_SOURCE MEMORY (Success)
VIDEO_PLAY (Success)
VIDEO_CONTINUE: (Success)
VIDEO_CLEAR_BUFFER: (Invalid argument)
Deconfiguring network interfaces... ifdown: interface wlan0 not configured
done.
Setting up IP spoofing protection: rp_filter.
Configuring network interfaces... udhcpc: started, v1.25.1
udhcpc: sending discover
udhcpc: sending discover
udhcpc: sending select for 192.168.1.42
udhcpc: lease of 192.168.1.42 obtained, lease time 864000
route: SIOCDELRT: No such process
adding dns 192.168.1.1
ifconfig: SIOCGIFFLAGS: No such device
done.
[set_was_timer_wakeup] error reading /etc/enigma2/timers.xml
[set_was_timer_wakeup] no timer aktiv
starting e2->
Simple mixer control 'SPDIF',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback -31 - 31
Mono: Playback 6 [60%] [on]
Simple mixer control 'Analog',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback -31 - 31
Mono: Playback 6 [60%] [on]
Simple mixer control 'HDMI',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback -31 - 31
Mono: Playback 6 [60%] [on]


(enigma2:2313): GStreamer-WARNING **: External plugin loader failed. This most likely means that the plugin loader helper binary was not found or could not be run. You might need to set the GST_PLUGIN_SCANNER environment variable if your setup is unusual. This should normally not be required though.
PYTHONPATH: /usr/lib/enigma2/python
DVB_API_VERSION 5 DVB_API_VERSION_MINOR 3
ENIGMA2_DEBUG settings: Level=3
[MAIN] executing main
libpng warning: iCCP: known incorrect sRGB profile
libpng warning: iCCP: cHRM chunk does not match sRGB
libpng warning: iCCP: known incorrect sRGB profile
libpng warning: iCCP: cHRM chunk does not match sRGB
< 93.776> :0: UserWarning: You do not have a working installation of the service_identity module: 'No module named service_identity'. Please install it from <https://pypi.python.org/pypi/service_identity> and make sure all of its dependencies are satisfied. Without the service_identity module and a recent enough pyOpenSSL to support it, Twisted can perform only rudimentary TLS client hostname verification. Many valid certificate/hostname mappings may be rejected.
********** end showiframe
VIDEO_SELECT_SOURCE DEMUX (Invalid argument)
killall: showiframe: no process killed

[bonkel]

tffpctl fehlt, ist wohl dafür zuständig, ich schaue das es im nächsten image mit drin is

[bonkel]

image von jetzt testen

[Alex23]

Die Fernbedienung geht, Tuner aber nicht.
Es werden auch keine Plugins im Pluginbrowser angezeigt.
Das Log ist von Start bis Aufruf Pluginbrowser.

ToFiÿ <<< Loader L23231>>>
“ToFi"Z¿Š¿Z[!p


Board: TF7700 [29-bit mode]






U-Boot 1.3.1-gfeb9b4b7-dirty (Oct 23 2011 - 12:43:54) - stm23_0043


DRAM: 128 MiB
NOR: 8 MiB
In: serial
Out: serial
Err: serial
Hit any key to stop autoboot: 1 0
(Re)start USB...
USB: scanning bus for devices... 1 USB Device(s) found
scanning bus for storage devices... 0 Storage Device(s) found
** Can't read from device 0 **


** Unable to use usb 0:1 for fatload **
## Booting image at 85000000 ...
Bad Magic Number
## Booting image at 80060000 ...
Image Name: Linux-2.6.32.71_stm24_0217
Image Type: SuperH Linux Kernel Image (gzip compressed)
Data Size: 1789348 Bytes = 1.7 MiB
Load Address: 84001000
Entry Point: 84002000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK


Starting kernel console=ttyAS0,115200 root=/dev/sda1 rw init=/bin/devinit ip=192.168.178.100:::255.255.255.0:tf7700:eth0:off mem=128m coprocessor_mem=4m@0x10000000,4m@0x10400000 rootdelay=6 nwhwconf=device:eth0,hwaddr:00:3e:9e:53:7d:9e - 0x00000000 - 0 ...




INIT: version 2.88 booting


init frontpanel
fsck.jfs version 1.1.15, 04-Mar-2011
processing started: 12/4/2016 12:42:51
The current device is: /dev/sda3


The superblock does not describe a correct jfs file system.


If device /dev/sda3 is valid and contains a jfs file system,
then both the primary and secondary superblocks are corrupt
and cannot be repaired, and fsck cannot continue.


Otherwise, make sure the entered device /dev/sda3 is correct.


[mountvirtfs] Mount /dev in tmpfs
[mountvirtfs] Copying device nodes to /dev
Starting portmap daemon....
Loading autofs
Starting autofs
[mountall] Mounting local filesystems...
Cleaning /tmp.
Hostname: TOPF.
init stmfb
LOADING MODULES
load firmware
copLoadFile (file /boot/audio.elf)
ustslave: Kernel Version: 24
base_address 0x10400000
seeking to 0
seeking to 5f00
seeking to 12320
seeking to 1aa20
seeking to 173100
seeking to 173138
seeking to 173170
seeking to 1b9058
seeking to 1b9060
seeking to 1b9068
seeking to 1b9070
seeking to 1d0920
seeking to 1d0a00
copLoadFile (file /boot/video.elf)
ustslave: Kernel Version: 24
base_address 0x10000000
seeking to 0
seeking to 1277c0
seeking to 1277f8
seeking to 127830
seeking to 14d558
seeking to 14d564
seeking to 14d570
seeking to 17df30
seeking to 180000
init embx
init AVS
insmod: /lib/modules/smartcard.ko: module not found
[mountall] Mounting local filesystems...
Model: 'tf7700hdpvr'
vBoxType: 5
Input device name: "TDT RC event driver"
Selected Remote: Tf7700 RemoteControl
RemoteControl Map:
STANDBY - 0A - 116
MUTE - 0C - 113
ZOOM - 42 - 372
VMODE - 43 - 47
AUDIO - 08 - 392
0BUTTON - 10 - 11
1BUTTON - 11 - 2
2BUTTON - 12 - 3
3BUTTON - 13 - 4
4BUTTON - 14 - 5
5BUTTON - 15 - 6
6BUTTON - 16 - 7
7BUTTON - 17 - 8
8BUTTON - 18 - 9
9BUTTON - 19 - 10
BACK - 1E - 158
INFO - 1D - 358
SEARCH - 05 - 217
SUBTITLE - 07 - 370
TEXT - 47 - 388
DOWN/P- - 01 - 108
UP/P+ - 00 - 103
RIGHT/V+ - 02 - 106
LEFT/V- - 03 - 105
OK/LIST - 1F - 352
MENU - 1A - 139
GUIDE - 1B - 365
EXIT - 1C - 102
FAV - 09 - 364
RED - 4D - 398
GREEN - 0D - 399
YELLOW - 0E - 400
BLUE - 0F - 401
REWIND - 45 - 168
PAUSE - 06 - 119
PLAY - 46 - 207
FASTFORWARD - 48 - 208
RECORD - 4B - 167
STOP - 4A - 128
SLOWMOTION - 49 - 409
RECORDLIST - 51 - 395
SAT - 5E - 381
STEPBACK - 50 - 412
STEPFORWARD - 52 - 407
BOOKMARKS - 4C - 156
TV/RADIO - 04 - 378
MEDIA - 40 - 226
TIMER - 44 - 362
Frontpanel Map:
CHANNELDOWN - 02 - 109
CHANNELUP - 03 - 104
VOLUMEDOWN - 01 - 114
VOLUMEUP - 06 - 115
STANDBY - 0C - 116
Supports Long KeyPress: 1
processComplex >
period 110, delay 10
Using period=110 delay=10
[SEM] DOWN
showSinglePic /boot/bootlogo.mvi
VIDEO_SELECT_SOURCE MEMORY (Success)
VIDEO_PLAY (Success)
VIDEO_CONTINUE: (Success)
VIDEO_CLEAR_BUFFER: (Invalid argument)
Deconfiguring network interfaces... done.
Setting up IP spoofing protection: rp_filter.
Configuring network interfaces... done.
[set_was_timer_wakeup] no timer aktiv
starting e2->
Simple mixer control 'Analog',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback -31 - 31
Mono: Playback 6 [60%] [on]
Simple mixer control 'SPDIF',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback -31 - 31
Mono: Playback 6 [60%] [on]
Simple mixer control 'HDMI',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback -31 - 31
Mono: Playback 6 [60%] [on]




(enigma2:2302): GStreamer-WARNING **: External plugin loader failed. This most likely means that the plugin loader helper binary was not found or could not be run. You might need to set the GST_PLUGIN_SCANNER environment variable if your setup is unusual. This should normally not be required though.
PYTHONPATH: /usr/lib/enigma2/python
DVB_API_VERSION 5 DVB_API_VERSION_MINOR 3
ENIGMA2_DEBUG settings: Level=3
[MAIN] executing main
libpng warning: iCCP: known incorrect sRGB profile
libpng warning: iCCP: cHRM chunk does not match sRGB
libpng warning: iCCP: known incorrect sRGB profile
libpng warning: iCCP: cHRM chunk does not match sRGB
< 56.599> :0: UserWarning: You do not have a working installation of the service_identity module: 'No module named service_identity'. Please install it from <https://pypi.python.org/pypi/service_identity> and make sure all of its dependencies are satisfied. Without the service_identity module and a recent enough pyOpenSSL to support it, Twisted can perform only rudimentary TLS client hostname verification. Many valid certificate/hostname mappings may be rejected.
Model not found
libpng warning: iCCP: known incorrect sRGB profile
libpng warning: iCCP: known incorrect sRGB profile
KEY by code: 8B - MENU
**** 102541 1 ****
[SEM] UP
KEY_PRESS - 8b 1
++++ 0 ms ++++
KEY by code: 8B - MENU
**** 51 1 ****
++++ 70 ms ++++
KEY_RELEASE - 8b 00 1 1 CAUSE=Timeout
---- 122 ms ----
[SEM] DOWN
KEY by code: 67 - UP/P+
**** 1909 2 ****
[SEM] UP
KEY_PRESS - 67 2
++++ 4 ms ++++
KEY by code: 67 - UP/P+
**** 47 2 ****
++++ 76 ms ++++
KEY_RELEASE - 67 00 2 2 CAUSE=Timeout
---- 125 ms ----
[SEM] DOWN
KEY by code: 67 - UP/P+
**** 293 3 ****
[SEM] UP
KEY_PRESS - 67 3
++++ 0 ms ++++
KEY by code: 67 - UP/P+
**** 52 3 ****
++++ 71 ms ++++
KEY_RELEASE - 67 00 3 3 CAUSE=Timeout
---- 123 ms ----
[SEM] DOWN
KEY by code: 67 - UP/P+
**** 279 4 ****
[SEM] UP
KEY_PRESS - 67 4
++++ 0 ms ++++
KEY by code: 67 - UP/P+
**** 52 4 ****
++++ 72 ms ++++
KEY_RELEASE - 67 00 4 4 CAUSE=Timeout
---- 124 ms ----
[SEM] DOWN
KEY by code: 160 - OK/LIST
**** 484 5 ****
[SEM] UP
KEY_PRESS - 160 5
++++ 0 ms ++++
KEY_RELEASE - 160 00 5 5 CAUSE=Timeout
---- 123 ms ----
[SEM] DOWN
libpng warning: iCCP: known incorrect sRGB profile
libpng warning: iCCP: known incorrect sRGB profile
KEY by code: 18F - GREEN
**** 2984 6 ****
[SEM] UP
KEY_PRESS - 18f 6
++++ 0 ms ++++
KEY by code: 18F - GREEN
**** 52 6 ****
++++ 71 ms ++++
KEY_RELEASE - 18f 00 6 6 CAUSE=Timeout
---- 123 ms ----
[SEM] DOWN




- - - Aktualisiert - - -

Ich habe gerade nochmal weiter getestet. Aufnahmen werden auch nicht wiedergegeben. Mp4-Dateien funktionieren (im Aufnahmebrowser). Mp3s werden aber diesmal mehrere nacheinander abgespielt (im BMC).

[orest]

HDMU 15672 Funktionen Fernbedienung ?

[krabbler]

HDMU 15671_4602 USF913 , keine Plugin anzeige, der Rest geht ,.

warum nimmt man nicht einen defekten build aus dem Download ?

Gruß

Krabbler

[bonkel]

Weil man Plugins über anderen Wege laden kann. Und wenn ich jetzt defekte lösche hat kein Image auf dem Server wäre

[Alex23]

Hallo,
es treten die selben Fehler und Funktionen auf, wie beim 15672 (http://www.hdmedia-universe.com/board/showthread.php?10484-HDMU-15671-Image-funktioniert-nicht-richtig&p=117714&viewfull=1#post117714) (Fernbedienung, Tuner, Plugins, Aufnahmen, mp3).
Mehr habe ich erstmal nicht getestet

ToFiÿ <<< Loader L23231>>>
“ToFi"Z¿Š¿Z[!p


Board: TF7700 [29-bit mode]






U-Boot 1.3.1-gfeb9b4b7-dirty (Oct 23 2011 - 12:43:54) - stm23_0043


DRAM: 128 MiB
NOR: 8 MiB
In: serial
Out: serial
Err: serial
Hit any key to stop autoboot: 1 0
(Re)start USB...
USB: scanning bus for devices... 1 USB Device(s) found
scanning bus for storage devices... 0 Storage Device(s) found
** Can't read from device 0 **


** Unable to use usb 0:1 for fatload **
## Booting image at 85000000 ...
Bad Magic Number
## Booting image at 80060000 ...
Image Name: Linux-2.6.32.71_stm24_0217
Image Type: SuperH Linux Kernel Image (gzip compressed)
Data Size: 1789348 Bytes = 1.7 MiB
Load Address: 84001000
Entry Point: 84002000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK


Starting kernel console=ttyAS0,115200 root=/dev/sda1 rw init=/bin/devinit ip=192.168.178.100:::255.255.255.0:tf7700:eth0:off mem=128m coprocessor_mem=4m@0x10000000,4m@0x10400000 rootdelay=6 nwhwconf=device:eth0,hwaddr:00:3e:9e:53:7d:9e - 0x00000000 - 0 ...




INIT: version 2.88 booting


init frontpanel
fsck.jfs version 1.1.15, 04-Mar-2011
processing started: 12/8/2016 20:58:09
The current device is: /dev/sda3


The superblock does not describe a correct jfs file system.


If device /dev/sda3 is valid and contains a jfs file system,
then both the primary and secondary superblocks are corrupt
and cannot be repaired, and fsck cannot continue.


Otherwise, make sure the entered device /dev/sda3 is correct.


[mountvirtfs] Mount /dev in tmpfs
[mountvirtfs] Copying device nodes to /dev
Starting portmap daemon....
Loading autofs
Starting autofs
[mountall] Mounting local filesystems...
Cleaning /tmp.
Hostname: TOPF.
init stmfb
LOADING MODULES
load firmware
copLoadFile (file /boot/audio.elf)
ustslave: Kernel Version: 24
base_address 0x10400000
seeking to 0
seeking to 5f00
seeking to 12320
seeking to 1aa20
seeking to 173100
seeking to 173138
seeking to 173170
seeking to 1b9058
seeking to 1b9060
seeking to 1b9068
seeking to 1b9070
seeking to 1d0920
seeking to 1d0a00
copLoadFile (file /boot/video.elf)
ustslave: Kernel Version: 24
base_address 0x10000000
seeking to 0
seeking to 1277c0
seeking to 1277f8
seeking to 127830
seeking to 14d558
seeking to 14d564
seeking to 14d570
seeking to 17df30
seeking to 180000
init embx
init AVS
insmod: /lib/modules/smartcard.ko: module not found
[mountall] Mounting local filesystems...
Model: 'tf7700hdpvr'
vBoxType: 5
Input device name: "TDT RC event driver"
Selected Remote: Tf7700 RemoteControl
RemoteControl Map:
STANDBY - 0A - 116
MUTE - 0C - 113
ZOOM - 42 - 372
VMODE - 43 - 47
AUDIO - 08 - 392
0BUTTON - 10 - 11
1BUTTON - 11 - 2
2BUTTON - 12 - 3
3BUTTON - 13 - 4
4BUTTON - 14 - 5
5BUTTON - 15 - 6
6BUTTON - 16 - 7
7BUTTON - 17 - 8
8BUTTON - 18 - 9
9BUTTON - 19 - 10
BACK - 1E - 158
INFO - 1D - 358
SEARCH - 05 - 217
SUBTITLE - 07 - 370
TEXT - 47 - 388
DOWN/P- - 01 - 108
UP/P+ - 00 - 103
RIGHT/V+ - 02 - 106
LEFT/V- - 03 - 105
OK/LIST - 1F - 352
MENU - 1A - 139
GUIDE - 1B - 365
EXIT - 1C - 102
FAV - 09 - 364
RED - 4D - 398
GREEN - 0D - 399
YELLOW - 0E - 400
BLUE - 0F - 401
REWIND - 45 - 168
PAUSE - 06 - 119
PLAY - 46 - 207
FASTFORWARD - 48 - 208
RECORD - 4B - 167
STOP - 4A - 128
SLOWMOTION - 49 - 409
RECORDLIST - 51 - 395
SAT - 5E - 381
STEPBACK - 50 - 412
STEPFORWARD - 52 - 407
BOOKMARKS - 4C - 156
TV/RADIO - 04 - 378
MEDIA - 40 - 226
TIMER - 44 - 362
Frontpanel Map:
CHANNELDOWN - 02 - 109
CHANNELUP - 03 - 104
VOLUMEDOWN - 01 - 114
showSinglePic /boot/bootlogo.mvi
VOLUMEUP - 06 - 115
STANDBY - 0C - 116
Supports Long KeyPress: 1
processComplex >
period 110, delay 10
Using period=110 delay=10
[SEM] DOWN
VIDEO_SELECT_SOURCE MEMORY (Success)
VIDEO_PLAY (Success)
VIDEO_CONTINUE: (Success)
VIDEO_CLEAR_BUFFER: (Invalid argument)
Deconfiguring network interfaces... done.
Setting up IP spoofing protection: rp_filter.
Configuring network interfaces... done.
[set_was_timer_wakeup] no timer aktiv
starting e2->
Simple mixer control 'HDMI',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback -31 - 31
Simple mixer control 'Analog',0
Mono: Playback 6 [60%] [on]
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback -31 - 31
Mono: Playback 6 [60%] [on]
Simple mixer control 'SPDIF',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback -31 - 31
Mono: Playback 6 [60%] [on]




(enigma2:2301): GStreamer-WARNING **: External plugin loader failed. This most likely means that the plugin loader helper binary was not found or could not be run. You might need to set the GST_PLUGIN_SCANNER environment variable if your setup is unusual. This should normally not be required though.
PYTHONPATH: /usr/lib/enigma2/python
DVB_API_VERSION 5 DVB_API_VERSION_MINOR 3
ENIGMA2_DEBUG settings: Level=3
[MAIN] executing main
libpng warning: iCCP: known incorrect sRGB profile
libpng warning: iCCP: cHRM chunk does not match sRGB
libpng warning: iCCP: known incorrect sRGB profile
libpng warning: iCCP: cHRM chunk does not match sRGB
Model not found
libpng warning: iCCP: known incorrect sRGB profile
********** end showiframe
VIDEO_SELECT_SOURCE DEMUX (Invalid argument)
killall: showiframe: no process killed
libpng warning: iCCP: known incorrect sRGB profile

[Alex23]

Hier treten ebenso dieselben Fehler und Funktionen auf, wie zuletzt (Fernbedienung, Tuner, Plugins, Aufnahmen, mp3).
Beim Spark 7162 (15682) funktioniert der Tuner, aber es hängt bei der mp3 Wiedergabe.

Das Log geht bis zum Abspielversuch einer Aufnahme:

ToFiÿ <<< Loader L23231>>>
“ToFi"Z¿Š¿Z[!p


Board: TF7700 [29-bit mode]







U-Boot 1.3.1-gfeb9b4b7-dirty (Oct 23 2011 - 12:43:54) - stm23_0043


DRAM: 128 MiB
NOR: 8 MiB
In: serial
Out: serial
Err: serial
Hit any key to stop autoboot: 1 0
(Re)start USB...
USB: scanning bus for devices... 1 USB Device(s) found
scanning bus for storage devices... 0 Storage Device(s) found
** Can't read from device 0 **


** Unable to use usb 0:1 for fatload **
## Booting image at 85000000 ...
Bad Magic Number
## Booting image at 80060000 ...
Image Name: Linux-2.6.32.71_stm24_0217
Image Type: SuperH Linux Kernel Image (gzip compressed)
Data Size: 1789347 Bytes = 1.7 MiB
Load Address: 84001000
Entry Point: 84002000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK


Starting kernel console=ttyAS0,115200 root=/dev/sda1 rw init=/bin/devinit ip=192.168.178.100:::255.255.255.0:tf7700:eth0:off mem=128m coprocessor_mem=4m@0x10000000,4m@0x10400000 rootdelay=6 nwhwconf=device:eth0,hwaddr:00:3e:9e:53:7d:9e - 0x00000000 - 0 ...




INIT: version 2.88 booting


init frontpanel
fsck.jfs version 1.1.15, 04-Mar-2011
processing started: 12/9/2016 17:34:17
The current device is: /dev/sda3


The superblock does not describe a correct jfs file system.


If device /dev/sda3 is valid and contains a jfs file system,
then both the primary and secondary superblocks are corrupt
and cannot be repaired, and fsck cannot continue.


Otherwise, make sure the entered device /dev/sda3 is correct.


[mountvirtfs] Mount /dev in tmpfs
[mountvirtfs] Copying device nodes to /dev
Starting portmap daemon....
Loading autofs
Starting autofs
[mountall] Mounting local filesystems...
Cleaning /tmp.
Hostname: TOPF.
init stmfb
LOADING MODULES
load firmware
copLoadFile (file /boot/audio.elf)
ustslave: Kernel Version: 24
base_address 0x10400000
seeking to 0
seeking to 5f00
seeking to 12320
seeking to 1aa20
seeking to 173100
seeking to 173138
seeking to 173170
seeking to 1b9058
seeking to 1b9060
seeking to 1b9068
seeking to 1b9070
seeking to 1d0920
seeking to 1d0a00
copLoadFile (file /boot/video.elf)
ustslave: Kernel Version: 24
base_address 0x10000000
seeking to 0
seeking to 1277c0
seeking to 1277f8
seeking to 127830
seeking to 14d558
seeking to 14d564
seeking to 14d570
seeking to 17df30
seeking to 180000
init embx
init AVS
insmod: /lib/modules/smartcard.ko: module not found
showSinglePic /boot/bootlogo.mvi
Model: 'tf7700hdpvr'
vBoxType: 5
Input device name: "TDT RC event driver"
Selected Remote: Tf7700 RemoteControl
RemoteControl Map:
STANDBY - 0A - 116
MUTE - 0C - 113
ZOOM - 42 - 372
VMODE - 43 - 47
AUDIO - 08 - 392
0BUTTON - 10 - 11
1BUTTON - 11 - 2
2BUTTON - 12 - 3
3BUTTON - 13 - 4
4BUTTON - 14 - 5
5BUTTON - 15 - 6
6BUTTON - 16 - 7
7BUTTON - 17 - 8
8BUTTON - 18 - 9
9BUTTON - 19 - 10
BACK - 1E - 158
INFO - 1D - 358
SEARCH - 05 - 217
SUBTITLE - 07 - 370
TEXT - 47 - 388
DOWN/P- - 01 - 108
UP/P+ - 00 - 103
RIGHT/V+ - 02 - 106
LEFT/V- - 03 - 105
OK/LIST - 1F - 352
MENU - 1A - 139
GUIDE - 1B - 365
EXIT - 1C - 102
FAV - 09 - 364
RED - 4D - 398
GREEN - 0D - 399
YELLOW - 0E - 400
BLUE - 0F - 401
REWIND - 45 - 168
PAUSE - 06 - 119
PLAY - 46 - 207
FASTFORWARD - 48 - 208
RECORD - 4B - 167
STOP - 4A - 128
SLOWMOTION - 49 - 409
RECORDLIST - 51 - 395
SAT - 5E - 381
VIDEO_SELECT_SOURCE MEMORY (Success)
VIDEO_PLAY (Success)
VIDEO_CONTINUE: (Success)
VIDEO_CLEAR_BUFFER: (Invalid argument)
[mountall] Mounting local filesystems...
STEPBACK - 50 - 412
STEPFORWARD - 52 - 407
BOOKMARKS - 4C - 156
TV/RADIO - 04 - 378
MEDIA - 40 - 226
TIMER - 44 - 362
Frontpanel Map:
CHANNELDOWN - 02 - 109
CHANNELUP - 03 - 104
VOLUMEDOWN - 01 - 114
VOLUMEUP - 06 - 115
STANDBY - 0C - 116
Supports Long KeyPress: 1
processComplex >
period 110, delay 10
Using period=110 delay=10
[SEM] DOWN
Deconfiguring network interfaces... done.
Setting up IP spoofing protection: rp_filter.
Configuring network interfaces... done.
[set_was_timer_wakeup] no timer aktiv
starting e2->
Simple mixer control 'Analog',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback -31 - 31
Mono: Playback 6 [60%] [on]
Simple mixer control 'HDMI',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback -31 - 31
Mono: Playback 6 [60%] [on]
Simple mixer control 'SPDIF',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback -31 - 31
Mono: Playback 6 [60%] [on]




(enigma2:2300): GStreamer-WARNING **: External plugin loader failed. This most likely means that the plugin loader helper binary was not found or could not be run. You might need to set the GST_PLUGIN_SCANNER environment variable if your setup is unusual. This should normally not be required though.
PYTHONPATH: /usr/lib/enigma2/python
DVB_API_VERSION 5 DVB_API_VERSION_MINOR 3
ENIGMA2_DEBUG settings: Level=3
[MAIN] executing main
libpng warning: iCCP: known incorrect sRGB profile
libpng warning: iCCP: cHRM chunk does not match sRGB
libpng warning: iCCP: known incorrect sRGB profile
libpng warning: iCCP: cHRM chunk does not match sRGB
Model not found
libpng warning: iCCP: known incorrect sRGB profile
********** end showiframe
VIDEO_SELECT_SOURCE DEMUX (Invalid argument)
libpng warning: iCCP: known incorrect sRGB profile
KEY by code: 80 - STOP
**** 88144 1 ****
[SEM] UP
KEY_PRESS - 80 1
++++ 3 ms ++++
KEY by code: 80 - STOP
**** 31 1 ****
++++ 89 ms ++++
KEY_RELEASE - 80 00 1 1 CAUSE=Timeout
---- 122 ms ----
[SEM] DOWN
KEY by code: 160 - OK/LIST
**** 11799 2 ****
[SEM] UP
KEY_PRESS - 160 2
++++ 0 ms ++++
KEY_RELEASE - 160 00 2 2 CAUSE=Timeout
---- 123 ms ----
[SEM] DOWN
Model not found
TuxTxt cache cleared
TuxTxt cache cleared
TuxTxt: initialized
TuxTxt service started 21
TuxTxt running thread...(021)
< 119.525> [eDVBPESReader] Created. Opening demux
< 119.529> [eDVBPESReader] Created. Opening demux
TuxTxt: readerror
TuxTxt: readerror
TuxTxt: readerror
TuxTxt: readerror
TuxTxt: readerror
TuxTxt: readerror
TuxTxt: readerror
libpng warning: iCCP: known incorrect sRGB profile
TuxTxt: readerror
< 124.161> [eDVBPESReader] ERROR reading PES (fd=37): Value too large for defined data type
TuxTxt: readerror
TuxTxt: readerror
TuxTxt: readerror
< 125.239> [eDVBPESReader] ERROR reading PES (fd=37): Value too large for defined data type
TuxTxt: readerror
TuxTxt: readerror
< 125.710> [eDVBPESReader] ERROR reading PES (fd=37): Value too large for defined data type
TuxTxt: readerror
< 126.060> [eDVBPESReader] ERROR reading PES (fd=37): Value too large for defined data type
TuxTxt: readerror
TuxTxt: readerror
TuxTxt: readerror
TuxTxt: readerror
TuxTxt: readerror
TuxTxt: readerror
TuxTxt: readerror
TuxTxt: readerror
TuxTxt: readerror
TuxTxt: readerror
TuxTxt: readerror
TuxTxt: readerror
TuxTxt: readerror
TuxTxt: readerror
TuxTxt: readerror
TuxTxt: readerror
TuxTxt: readerror
TuxTxt: readerror
TuxTxt: readerror
TuxTxt: readerror
TuxTxt: readerror
TuxTxt: readerror
TuxTxt: readerror
TuxTxt: readerror
TuxTxt: readerror
TuxTxt: readerror
TuxTxt: readerror
TuxTxt: readerror
TuxTxt: readerror
TuxTxt: readerror
TuxTxt: readerror

[bonkel]

Kannst du mal testweise alle Kabel ab machen. Also sat und oder Kabel. Und dann Box ein schalten und mp3 testen

[Alex23]

Da du von Sat und/oder Kabel schriebst, gehe ich davon aus, dass du einen Test bei dem Spark 7162 meintest. Ohne Sat-Kabel ging die mp3-Wiedergabe von mehreren Titeln. Allerdings kam es beim Drücken von Exit zum crash.Ich konnte es später allerdings nicht mehr nachstellen. Da lief es dann ganz ohne Probleme (Abspielen; Player beenden; Abspielen; Beenden;...).Im Log ist die Rede von "Premature end of JPEG file". Ich weiß allerdings nicht, ob das relevant ist.Ich hänge mal beide an.

[bonkel]

Genau meinte die spark ist ja witzig Daa ohne tuner Signal mp3 geht

[KleinerSchelm]

wobei ein 217er image nicht so toll für die töpfe, würde da eher 209er bauen lassen.
Ohne patch kann es am sata port zu korrupten Dateien kommen.
Kann in dem Fall auch wo anders dran liegen. Aber ohne sata path haben viele Töpfe so ihre Probleme. Den sata patch gibt es nur bis kernel 209.

[bonkel]

04-Dec-2016 13:04 hab ich ein 209er gebaut...scheint nich als würde das dass prob lösen

[sathep]

Hallo,
ah jetzt verstehe ich wieso die Plugins nicht laufen, wo kann man die denn runterladen und dann installieren. War lange nicht mehr mit HDMU beschäftigt, da ich das meiste über die Dreamboxen mache.
Gruß
Sathep

[bonkel]

Per Telnet opkg list

[sathep]

Only update opkg list dann sind sie da?
mit opkg install .. installieren?

Also habe wohl Oscam am laufen aber mit dem Tuner geht gar nichts. Habe das neuste Images geladen 15685 topf 217_git_4652.

und die uhrzeit geht trotz Batteriewechsel nicht gibt

Welches image funktioniert den brauchbar.