PDA

Archiv verlassen und diese Seite im Standarddesign anzeigen : Hard Drive Wont Initialize on HDMU E2



fatboy7
12.08.2012, 22:56
Hello.

I have a SF1018 (tried as a Altevo 7000, as well), with Maxi Flasher BA09a, bootloader, on HDMU 955-209 GIT 4299 (the latest).

Very good and stable, but It wont initilize the hard drive, goes into the process and sticks at 50%, for ever.

I'm fairly good with linux and can get it to work, by formating with a label of RECORD, then changing the record paths in the menus.

BUT.

Is there a reason why it does this, I would like it just work.

I have a SSD as a internal hard disk ?
It was origonally a Icecrypt s4000?
State of the HDD when Maxi Flash executed in stock firmware ?

Any help would be very gratfull.

Thanks and Regards...
Chris...

gazdaman
06.09.2012, 11:17
Im having the same issue with the latest build 1095
How did you format it with the label of RECORD? Through telnet?
Currently I have no hard drive to record to because of this.
Any instructions to do this would be great
I have a 1TB Sata internal drive.
Thanks

santa
06.09.2012, 11:32
Hi,

show your activ partitions:
fdisk -l
blkid

if you only have one part:
-this part is empty:
mkfs.ext2 -L RECORD /dev/sda1
-this part isn`t empty:
tune2fs -L RECORD /dev/sda1

create movie dir on this part:
cd /autofs/sda1
mkdir movie

if you have more then one part or a usbstick, please post the answer of blkid and fdisk -l

Macbest
06.09.2012, 11:53
Das ist mal eine saubere Anleitung.......

gazdaman
08.09.2012, 04:00
Awesome tips.
Worked perfectly
Thanks Santa
:)

Daniele la Torre
19.03.2013, 16:15
hi guys, i try to connect my external hard drive fat32 formatted on GM Spark Triplex. When i want to format it give message "error: time elapsed", i try with another hard drive but it's the same. what can i do, please?

morly
19.03.2013, 16:36
format - how? via image?
try to do it via telnet (or other tools) - this is the much better choice!
if you cannot get a clue of what I am talking - just let me know ;)

Daniele la Torre
20.03.2013, 00:47
yes, solution is via telnet, via image is not possible because i have to create partition before, so fdisk to create partition and then "santa"'s advice...thank you

morly
20.03.2013, 07:28
Create the image directly on the box... Best solution!
So please connect via telnet an do a

fdisk -l
With the disk connected. Post the output here...

By the way, you could also try the easy way... Admin Tool... already tried?

OrTiN
21.03.2013, 13:38
Hey,
I had the same problem with my HDD. Because I'm not really familiar with Linux (don't use it until finishing my studies) I need some time to find a solution. After I handled it I found this topic :rolleyes:.
Why the Geier :D, the image has such problems to initialize the hdd in the correct way. Is it on the to do list? Not all of the image user know to handle command line...

Gruß,
Daniel

morly
21.03.2013, 15:29
Why the Geier :D, the image has such problems to initialize the hdd in the correct way. Is it on the to do list? Not all of the image user know to handle command line...

... this is why other users build tools to help you ;) "Why the Geier" - nice translation :D

OrTiN
21.03.2013, 19:57
Ich glaub ich mache mal auf dt. weiter.

Klar gibt es Möglichkeiten, aber out of the Box wäre halt runder.

Gruß,
Daniel

santa
21.03.2013, 20:00
Dafür ist jetzt ja das tool von morly da, damit geht das kinderleicht, ich hoffe die Tage die Anleitungen
dafür fertig zu schreiben.

OrTiN
21.03.2013, 20:40
Jupp eben installiert! Top Tool!!!

nuggistar
28.03.2013, 22:31
Bei mir kam das ...


SPARK7162:~# fdisk -l

Disk /dev/sda: 750.1 GB, 750156374016 bytes
255 heads, 63 sectors/track, 91201 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

Device Boot Start End Blocks Id System


--

Der nächste Schritt eine ext2 Partition zu erstellen, scheiterte ...
SPARK7162:~# mkfs ext2 -L RECORD /dev/sda1
mke2fs 1.42.7 (21-Jan-2013)
mkfs.ext2: No such device or address while trying to determine filesystem size

nuggistar
28.03.2013, 22:32
Ah und mit Morly´s Tool krieg ich immer Errors, das Programm stürzt ab :-/

santa
28.03.2013, 22:56
ja der Fehler im tool ist bekannt, deine HDD hat keine Partitionen.
Deswegen geht das formatieren auch nicht, also musst du nun wie in der FAQ beschrieben,
mit fdisk /dev/sda eine neue Partition erstellen, dann geht auch formatieren.

morly
29.03.2013, 08:54
ja der Fehler im tool ist bekannt, deine HDD hat keine Partitionen.
Bin gerade dabei das Problem zu beheben - allerdings tritt es bei mir natürlich wieder mal nicht auf...
Also - ich bitte um die Schritte bis zum Absturz, damit es für mich rekonstruierbar wird...

edit: habe ein Problem gefunden und ausgemerzt - weiss nicht ob es das war. Bitte Version 1.1.0.4 testen.

morly

nuggistar
29.03.2013, 17:43
Danke morly.Teste es morgen und geb dir Bescheid...LG