HDMU 16564 geht immer noch nicht !!!

[arrap1968]

Startet bis "BOOT" dann steht Wieder der Bootloader 7.37 im Display (Festanstehend)!!!
Also keine Bootschleife !!


'0¦¦(Re)start USB...
Front USB: scanning bus for devices... 3 USB Device(s) found
scanning bus for storage devices... 1 Storage Device(s) found
system volume information/
262144000 root.img
3012735 uimage
$recycle.bin/

2 file(s), 2 dir(s)
reading uImage
.................................................. .................................................. .................................................. .................................................. .................................................. ............................................
ret=> 3012735
Wait [1]
Wait [2]
Wait [3]
Wait [4]
Wait [5]
Wait [6]
ext2fs_check_if_mount: Can't check if filesystem is mounted due to missing mtab file while determining whether /mnt/root.img is mounted.
/mnt/root.img: clean, 5883/64000 files, 115949/256000 blocks
mount root
INIT: version 2.88 booting
init frontpanel

[bonkel]

dann muss ich den support wohl leider einstellen, ich finde beim bauen keinen fehler bisher....also sollte alles richtig sein

[arrap1968]

Nein ,Das sollte keine Kritik sein !!! Bitte nicht den Suport einstellen !!!
Ich bin mit HDMU zufrieden,und solange nehme Ich sowieso die Firmware:" HDMU_15496_E2_1008g+se+_217_git_4206" bis ihr den Fehler Gefunden habt .:rolleyes:
Danke für eure Mühe

[bonkel]

es bringt mir ja nichts images für diese box zu bauen, wenn sie eh nicht gehen.......ich finde wie gesagt kein fehler beim bauen, und das log sagt leider auch zu wenig
das image wird ja erkannt, bis init frontpanel kommt er ja, denke er fliegt bei dem nuvoton.ko raus...wieso weiss ich allerdings nicht, ich bau gleich ein image, mit ner anderen ko

[arrap1968]

HI Bonkel
Jetzt geht es Danke aber im Display Steht "Boot" , aber es läuft ;)


'0¦¦(Re)start USB...
Front USB: scanning bus for devices... 3 USB Device(s) found
scanning bus for storage devices... 1 Storage Device(s) found
system volume information/
$recycle.bin/
262144000 root.img
3012742 uimage

2 file(s), 2 dir(s)

reading uImage
.................................................. .................................................. .................................................. .................................................. .................................................. ............................................
ret=> 3012742
Wait [1]
Wait [2]
Wait [3]
Wait [4]
Wait [5]
Wait [6]
ext2fs_check_if_mount: Can't check if filesystem is mounted due to missing mtab file while determining whether /mnt/root.img is mounted.
/mnt/root.img: clean, 5883/64000 files, 115948/256000 blocks
mount root
INIT: version 2.88 booting
init frontpanel
WAIT 1 min
mknod: /dev/avs: File exists
mknod: /dev/fuse: File exists
[mountvirtfs] Mount /dev in tmpfs
[mountvirtfs] Copying device nodes to /dev
Starting portmap daemon....
Loading autofs
Starting autofs
[mountall] Mounting local filesystems...
mount: mounting LABEL=RECORD on /hdd failed: No such file or directory
Cleaning /tmp /var/run /var/lock.
Hostname: 1008G+SE+.
init stmfb
LOADING MODULES
load firmware
copLoadFile (file /boot/audio.elf)
ustslave: Kernel Version: 24
base_address 0x40400000
seeking to 0
seeking to 5e00
seeking to 12460
seeking to 1ab60
seeking to 154300
seeking to 154338
seeking to 154370
seeking to 191a58
seeking to 191a60
seeking to 191a68
seeking to 191a70
seeking to 1aae40
seeking to 1aaf00
copLoadFile (file /boot/video.elf)
ustslave: Kernel Version: 24
base_address 0x40000000
seeking to 0
seeking to 60980
seeking to 148478
seeking to 1484b0
seeking to 1484e8
seeking to 158858
seeking to 158864
seeking to 158880
seeking to 184d94
seeking to 186e00
init embx
init AVS
skip mpeg2
Model: 'hs7819'
vBoxType: 8
Input device name: "TDT RC event driver"
Selected Remote: Fortis RemoteControl
RemoteControl Map:
MENU - 04 - 139
RED - 4B - 398
GREEN - 4A - 399
YELLOW - 49 - 400
BLUE - 48 - 401
EXIT - 1C - 174
TEXT - 0D - 388
EPG - 08 - 365
REWIND - 58 - 168
FASTFORWARD - 5C - 208
PLAY - 55 - 207
PAUSE - 07 - 119
RECORD - 56 - 167
STOP - 54 - 128
STANDBY - 0A - 116
MUTE - 0C - 113
CHANNELUP - 5E - 104
CHANNELDOWN - 5F - 109
VOLUMEUP - 4E - 115
VOLUMEDOWN - 4F - 114
INFO - 06 - 358
OK - 1F - 352
UP - 00 - 103
RIGHT - 02 - 106
DOWN - 01 - 108
LEFT - 03 - 105
BACK - 09 - 158
ZOOM - 0B - 372
VMODE - 0E - 47
RESOLUTION - 0F - 393
TVRADIO - 1A - 378
SLEEP - 1E - 142
OPEN - 40 - 361
FAV - 41 - 364
TIMER - 42 - 362
UPUP - 43 - 414
DOWNDOWN - 44 - 415
NEXT - 4C - 407
LAST - 50 - 412
PIP - 51 - 375
MEDIA - 52 - 226
LIST - 53 - 395
0BUTTON - 10 - 11
1BUTTON - 11 - 2
2BUTTON - 12 - 3
3BUTTON - 13 - 4
4BUTTON - 14 - 5
5BUTTON - 15 - 6
6BUTTON - 16 - 7
7BUTTON - 17 - 8
8BUTTON - 18 - 9
9BUTTON - 19 - 10
Frontpanel Map:
STANDBY - 00 - 116
OK - 06 - 352
MENU - 05 - 139
VOLUMEUP - 03 - 115
VOLUMEDOWN - 04 - 114
CHANNELUP - 01 - 104
CHANNELDOWN - 02 - 109
Supports Long KeyPress: 1
processComplex >
period 10, delay 120
Using period=10 delay=120
[SEM] DOWN
[mountall] Mounting local filesystems...
showSinglePic /boot/bootlogo.mvi
VIDEO_SELECT_SOURCE MEMORY (Success)
VIDEO_PLAY (Success)
VIDEO_CONTINUE: (Success)
VIDEO_CLEAR_BUFFER: (Invalid argument)
Deconfiguring network interfaces... ifdown: interface lo not configured
ifdown: interface eth0 not configured
ifdown: interface wlan0 not configured
done.
Setting up IP spoofing protection: rp_filter.
Configuring network interfaces... udhcpc: started, v1.26.2
udhcpc: sending discover
mount: mounting LABEL=RECORD on /hdd failed: No such file or directory
udhcpc: sending select for 192.168.178.109
udhcpc: lease of 192.168.178.109 obtained, lease time 864000
route: SIOCDELRT: No such process
adding dns 192.168.178.1
ifconfig: SIOCGIFFLAGS: No such device
done.
[set_was_timer_wakeup] error reading /etc/enigma2/timers.xml
[set_was_timer_wakeup] no timer aktiv
Invalid card number.
Usage: amixer <options> command

Available options:
-h,--help this help
-c,--card N select the card
-D,--device N select the device, default 'default'
-d,--debug debug mode
-n,--nocheck do not perform range checking
-v,--version print version of this program
-q,--quiet be quiet
-i,--inactive show also inactive controls
-a,--abstract L select abstraction level (none or basic)

Available commands:
scontrols show all mixer simple controls
Invalid card number.
Usage: amixer <options> command

Available options:
-h,--help this help
-c,--card N select the card
-D,--device N select the device, default 'default'
-d,--debug debug mode
-n,--nocheck do not perform range checking
-v,--version print version of this program
-q,--quiet be quiet
-i,--inactive show also inactive controls
-a,--abstract L select abstraction level (none or basic)

Available commands:
scontrols show all mixer simple controls
scontents show contents of all mixer simple controls (default command)
sset sID P set contents for one mixer simple control
sget sID get contents for one mixer simple control
controls show all controls for given card
contents show contents of all controls for given card
cset cID P set control contents for one control
cget cID get control contents for one control
scontents show contents of all mixer simple controls (default command)
sset sID P set contents for one mixer simple control
sget sID get contents for one mixer simple control
controls show all controls for given card
contents show contents of all controls for given card
cset cID P set control contents for one control
cget cID get control contents for one control
Invalid card number.
Usage: amixer <options> command

Available options:
-h,--help this help
-c,--card N select the card
-D,--device N select the device, default 'default'
-d,--debug debug mode
-n,--nocheck do not perform range checking
-v,--version print version of this program
-q,--quiet be quiet
-i,--inactive show also inactive controls
-a,--abstract L select abstraction level (none or basic)

Available commands:
scontrols show all mixer simple controls
scontents show contents of all mixer simple controls (default command)
sset sID P set contents for one mixer simple control
sget sID get contents for one mixer simple control
controls show all controls for given card
contents show contents of all controls for given card
cset cID P set control contents for one control
cget cID get control contents for one control
starting e2->
rm: can't remove '/media/USB/SWAPPART': No such file or directory
rm: can't remove '/media/USB/Record': No such file or directory

(enigma2:2059): GStreamer-WARNING **: External plugin loader failed. This most likely means that the plugin loader helper binary was not found or could not be run. You might need to set the GST_PLUGIN_SCANNER environment variable if your setup is unusual. This should normally not be required though.
mount: mounting LABEL=RECORD on /hdd failed: No such file or directory
PYTHONPATH: /usr/lib/enigma2/python
DVB_API_VERSION 5 DVB_API_VERSION_MINOR 3
ENIGMA_DEBUG_LVL=3
[MAIN] executing main
no profile data available
libpng warning: iCCP: known incorrect sRGB profile
libpng warning: iCCP: cHRM chunk does not match sRGB
libpng warning: iCCP: known incorrect sRGB profile
libpng warning: iCCP: cHRM chunk does not match sRGB
KEY by code: 67 - UP
**** 66671 1 ****

[vISIOn]

Hast ne PN

Gruß

[arrap1968]

Habe es Getestet . Steht immer noch "BOOT" im display aber läuft !!!!


'0▒▒(Re)start USB...
Front USB: scanning bus for devices... 3 USB Device(s) found
scanning bus for storage devices... 1 Storage Device(s) found
system volume information/
$recycle.bin/
262144000 root.img
3012742 uimage

2 file(s), 2 dir(s)

reading uImage
.................................................. .................................................. .................................................. .................................................. .................................................. ............................................
ret=> 3012742
Wait [1]
Wait [2]
Wait [3]
Wait [4]
Wait [5]
Wait [6]
ext2fs_check_if_mount: Can't check if filesystem is mounted due to missing mtab file while determining whether /mnt/root.img is mounted.
/mnt/root.img: clean, 8753/64000 files, 144361/256000 blocks
mount root
INIT: version 2.88 booting
init frontpanel
insmod: can't insert '/lib/modules/nuvoton.ko': invalid module format
[mountvirtfs] Mount /dev in tmpfs
[mountvirtfs] Copying device nodes to /dev
Starting portmap daemon....
Loading autofs
Starting autofs
[mountall] Mounting local filesystems...
mount: mounting LABEL=RECORD on /hdd failed: No such file or directory
Cleaning /tmp.
Hostname: 1008G+SE+.
init stmfb
/etc/init.d/rcS: line 667: can't create /dev/vfd: No such device or address
LOADING MODULES
load firmware
copLoadFile (file /boot/audio.elf)
ustslave: Kernel Version: 24
base_address 0x40400000
seeking to 0
seeking to 5e00
seeking to 12460
seeking to 1ab60
seeking to 154300
seeking to 154338
seeking to 154370
seeking to 191a58
seeking to 191a60
seeking to 191a68
seeking to 191a70
seeking to 1aae40
seeking to 1aaf00
copLoadFile (file /boot/video.elf)
ustslave: Kernel Version: 24
base_address 0x40000000
seeking to 0
seeking to 60980
seeking to 148478
seeking to 1484b0
seeking to 1484e8
seeking to 158858
seeking to 158864
seeking to 158880
seeking to 184d94
seeking to 186e00
init embx
init AVS
skip mpeg2
Model: 'hs7819'
vBoxType: 8
Input device name: "TDT RC event driver"
Selected Remote: Fortis RemoteControl
RemoteControl Map:
MENU - 04 - 139
RED - 4B - 398
GREEN - 4A - 399
YELLOW - 49 - 400
BLUE - 48 - 401
EXIT - 1C - 174
TEXT - 0D - 388
EPG - 08 - 365
REWIND - 58 - 168
FASTFORWARD - 5C - 208
PLAY - 55 - 207
PAUSE - 07 - 119
RECORD - 56 - 167
STOP - 54 - 128
STANDBY - 0A - 116
MUTE - 0C - 113
CHANNELUP - 5E - 104
CHANNELDOWN - 5F - 109
VOLUMEUP - 4E - 115
VOLUMEDOWN - 4F - 114
INFO - 06 - 358
OK - 1F - 352
UP - 00 - 103
RIGHT - 02 - 106
DOWN - 01 - 108
LEFT - 03 - 105
BACK - 09 - 158
ZOOM - 0B - 372
VMODE - 0E - 47
RESOLUTION - 0F - 393
TVRADIO - 1A - 378
SLEEP - 1E - 142
OPEN - 40 - 361
FAV - 41 - 364
TIMER - 42 - 362
UPUP - 43 - 414
DOWNDOWN - 44 - 415
NEXT - 4C - 407
LAST - 50 - 412
PIP - 51 - 375
MEDIA - 52 - 226
LIST - 53 - 395
0BUTTON - 10 - 11
1BUTTON - 11 - 2
2BUTTON - 12 - 3
3BUTTON - 13 - 4
4BUTTON - 14 - 5
5BUTTON - 15 - 6
6BUTTON - 16 - 7
7BUTTON - 17 - 8
8BUTTON - 18 - 9
9BUTTON - 19 - 10
Frontpanel Map:
STANDBY - 00 - 116
OK - 06 - 352
MENU - 05 - 139
VOLUMEUP - 03 - 115
VOLUMEDOWN - 04 - 114
CHANNELUP - 01 - 104
CHANNELDOWN - 02 - 109
Supports Long KeyPress: 1
processComplex >
[mountall] Mounting local filesystems...
showSinglePic /boot/bootlogo.mvi
VIDEO_SELECT_SOURCE MEMORY (Success)
VIDEO_PLAY (Success)
VIDEO_CONTINUE: (Success)
VIDEO_CLEAR_BUFFER: (Invalid argument)
period 10, delay 120
error in device initialization
Deconfiguring network interfaces... done.
Setting up IP spoofing protection: rp_filter.
Configuring network interfaces... done.
mount: mounting LABEL=RECORD on /hdd failed: No such file or directory
[set_was_timer_wakeup] no timer aktiv
/usr/emu/oscam11198: invalid option -- 'b'
ERROR: Unknown command line parameter: -b
Invalid card number.
Usage: amixer <options> command

Available options:
-h,--help this help
-c,--card N select the card
-D,--device N select the device, default 'default'
-d,--debug debug mode
-n,--nocheck do not perform range checking
-v,--version print version of this program
-q,--quiet be quiet
-i,--inactive show also inactive controls
-a,--abstract L select abstraction level (none or basic)

Available commands:
scontrols show all mixer simple controls
scontents show contents of all mixer simple controls (default command)
sset sID P set contents for one mixer simple control
sget sID get contents for one mixer simple control
controls show all controls for given card
contents show contents of all controls for given card
cset cID P set control contents for one control
cget cID get control contents for one control
Invalid card number.
Invalid card number.
Usage: amixer <options> command

Available options:
co -h,--help this help
-c,--card N select the card
-D,--device N select the device, default 'default'
-d,--debug debug mode
-n,--nocheck do not perform range checking
-v,--version print version of this program
-q,--quiet be quiet
-i,--inactive show also inactive controls
-a,--abstract L select abstraction level (none or basic)

Available commands:
scontrols show all mixer simple controls
scontents show contents of all mixer simple controls (default command)
sset sID P set contents for one mixer simple control
sget sID get contents for one mixer simple control
controls show all controls for given card
contents show contents of all controls for given card
cset cID P set control contents for one control
cget cID get control contents for one control
Usage: amixer <options> command

Available options:
-h,--help this help
-c,--card N select the card
-D,--device N select the device, default 'default'
-d,--debug debug mode
-n,--nocheck do not perform range checking
-v,--version print version of this program
-q,--quiet be quiet
-i,--inactive show also inactive controls
-a,--abstract L select abstraction level (none or basic)

Available commands:
scontrols show all mixer simple controls
scontents show contents of all mixer simple controls (default command)
sset sID P set contents for one mixer simple control
sget sID get contents for one mixer simple control
controls show all controls for given card
contents show contents of all controls for given card
cset cID P set control contents for one control
cget cID get control contents for one control
/etc/init.d/rcS: line 667: can't create /dev/vfd: No such device or address
starting e2->

(enigma2:2072): GStreamer-WARNING **: External plugin loader failed. This most likely means that the plugin loader helper binary was not found or could not be run. You might need to set the GST_PLUGIN_SCANNER environment variable if your setup is unusual. This should normally not be required though.
mount: mounting LABEL=RECORD on /hdd failed: No such file or directory
PYTHONPATH: /usr/lib/enigma2/python
DVB_API_VERSION 5 DVB_API_VERSION_MINOR 3
ENIGMA_DEBUG_LVL=3
[MAIN] executing main
libpng warning: iCCP: known incorrect sRGB profile
Cannot open /dev/vfd
No such device or address
Set compatibility mode: Bad file descriptor
Set VFD brightness: Bad file descriptor
TuxTxt cache cleared
TuxTxt cache cleared
TuxTxt: initialized
TuxTxt service started 17f2
[eDVBPESReader] Created. Opening demux
[eDVBPESReader] Created. Opening demux
TuxTxt running thread...(17f2)





Nachtrag : Die Fernbedienung geht nicht mehr !!!!!!!

[vISIOn]

Ja nimm mal gerade erst die alte ko... muss mir das noch mal anschauen.Meine ko passt nicht die ich geschickt habe.

Schaue noch mal

[bonkel]

neustes image testen....

[spartak73]

neustes image testen....

Geht nicht. Nach dem einschalten kommt Boot im Display, danach wieder LD 7.37


'1▒(Re)start USB...
Front USB: scanning bus for devices... 3 USB Device(s) found
scanning bus for storage devices... 1 Storage Device(s) found
system volume information/
intel_mei_10.0.27.1012/
$recycle.bin/
19388592 kmstools.exe
programs/
windows.loader.v2.2.2/
>20o ?0?:0/
>20o ?0?:0 (2)/
262144000 root.img
3012742 uimage
./
../
12 wpsettings.dat
76 indexervolumeguid

5 file(s), 9 dir(s)

reading uImage
.................................................. .................................................. .................................................. .................................................. .................................................. ............................................
ret=> 3012742
Wait [1]
Wait [2]
Wait [3]
Wait [4]
Wait [5]
Wait [6]
ext2fs_check_if_mount: Can't check if filesystem is mounted due to missing mtab file while determining whether /mnt/root.img is mounted.
/mnt/root.img: clean, 5883/64000 files, 115949/256000 blocks
mount root
INIT: version 2.88 booting
init frontpanel


Vorherige Image war besser... ;)

[vISIOn]

Ja sind dabei... bisschen Geduld

[arrap1968]

HI,Bonkel
Vision hat die Image gefixt , wo das Display läuft ...Ich habe sie getestet ..
Aber die Tastenbelegung für "Power" geht nicht , kurz berührt und der Octi fährt in Deep Standby.
Standby geht nicht .
Eine Uhr ist auch nicht im Display !!!
Vieleicht kannst dich mit Vision in verbindung setzen ...
Nochmals DANKE für eure Mühe

[Audioniek]

Das direkt in Deep Standby fahren beim betaetigen des Power-Tastes ist inzwischen von mir behoben worden und ich habe die HDMU-Leute benachrichtigt. Es betraf ein Fehler im nuvoton-Treiber. Hoffentlich wird es gefixt und eingebaut.

Damit sind leider die Probleme mit den Power-Taste noch nicht ganz aus der Welt: Im Image ist da auch noch was nicht richtig. Die Power-Taste wird zwar korrekt identifiziert und auch die gute Aktion zugewiesen, aber die Aktion besteht laut dem Log nicht. Das netto Resultat ist jetzt das die Receiver nur im (Deep) Standy zu versetzen ist mittels das Menue. Ich habe die Ursache des Problems noch nicht gefunden, aber bin dran. Es liegt nicht am Hotkey settings.

Gruesse,

Audioniek.

[bonkel]

Ich brauch leider noch etwas hab wenig Zeit Grad

Gesendet von meinem SM-G935F mit Tapatalk

[Audioniek]

Inzwischen ist auch das zweite Teil des Problems mit den Power-Taste geloest. Es liegt an eine Programmierfehler im Datei mytest.py die mit eine Aenderung am 17. Mai 2016 introduziert worden ist. Die Programmierung wurde am 25. Juli 2016 nochmals geaendert und damit verschwand das Problem wieder. Nur Images die sich basieren auf einen Checkout zwischen die genannten Daten sind also davon betroffen (in meinen git ist das nur diff2). Folgende Aenderung bringt Abhilfe:

@@ -355,7 +359,7 @@
def doAction(self, selected, longkey=False):
if self.longkeyPressed:
self.longkeyPressed = False
- elif selected and self.session.infobar:
+ elif selected and self.session.infobar == None:
if longkey:
self.longkeyPressed = True
selected = selected.split("/")


In meinem cdk_new-git ist dies im diff2-Patch schon angepasst worden.

Gruesse,

Audioniek.