lockoo
25.09.2017, 17:08
Hallo Bonkel. Hab gestern für die F1 die Software online upgedatet. Danach bootete er nicht mehr. Kann natürlich auch an ein paar änderungen von mir liegen. Wollte also frisches Image installieren ist aber leider nicht da zum herunterladen:-(
Bin jetzt gerade dabei ein Backup einzuspielen und teste dann nochmal das Onlineupdate. Kann dann auch noch ein serielles log anhängen.
#Log file from Morlys SH4 STB Admin Tool from: Mo Sep 25 2017, 17:31:00
BCM73460012
M00CZSL2=1
LLMB=0000C000
BP=02000000
L2Cfg=1E7AD627
L2Buf=77707711
BrCfg=F01C200E
BrMod=02800801
BrZp0=44000000
BrZp1=00002000
#@
BCM97356B2 CFE v3.38, Endian Mode: Little
Build Date: 2014-05-03 (v28)
Copyright (C) Broadcom Corporation.
ReShmoo MEMC0
CPU speed: 1104MHz
DDR Frequency: 796 MHz
DDR Mode: DDR3
Total memory(MEMC 0): 1024MB
MEMC 0 DDR Width: 32
Boot Device: NAND
Total flash: 512MB
RTS VERSION: Initial RTS Version
ETH0_PHY: RGMII
ETH0_MDIO_MODE: 1
ETH0_SPEED: 1000
ETH0_PHYADDR: probe
Initializing USB.
USB: Locating Class 09 Vendor 0000 Product 0000: USB Root Hub
USB: Locating Class 09 Vendor 0000 Product 0000: USB Root Hub
USB: Locating Class 09 Vendor 0000 Product 0000: USB Root Hub
USB: Locating Class 09 Vendor 0000 Product 0000: USB Root Hub
CFE initialized.
USB: New device connected to bus 0 hub 1 port 1[J
USB: Resetting device on bus 0 hub 1 port 1[J
USB: Locating Class 08 Vendor 0930 Product 6544: Mass-Storage Device
USBMASS: Unit 0 connected[J
USB: New device connected to bus 1 hub 1 port 1[J
USB: Resetting device on bus 1 hub 1 port 1[J
USB: Locating Class 02 Vendor 04A3 Product 0101: Driver not found.
*** Could not find a valid partition...status=00000000, ids=83838205!
*** Could not find a valid partition...status=00000000, ids=83838205!
Starting splash screen.
No valid image found in flash0.splash - disabling splash
Executing STARTUP...
Loader:elf Filesys:raw Dev:flash0.kernel File: Options:(null)
Loading: Failed.
Could not load : I/O error
Trying again with '-nz' option
Loading: Failed.
Could not load : Not an ELF-format executable
CFE>
Bin jetzt gerade dabei ein Backup einzuspielen und teste dann nochmal das Onlineupdate. Kann dann auch noch ein serielles log anhängen.
#Log file from Morlys SH4 STB Admin Tool from: Mo Sep 25 2017, 17:31:00
BCM73460012
M00CZSL2=1
LLMB=0000C000
BP=02000000
L2Cfg=1E7AD627
L2Buf=77707711
BrCfg=F01C200E
BrMod=02800801
BrZp0=44000000
BrZp1=00002000
#@
BCM97356B2 CFE v3.38, Endian Mode: Little
Build Date: 2014-05-03 (v28)
Copyright (C) Broadcom Corporation.
ReShmoo MEMC0
CPU speed: 1104MHz
DDR Frequency: 796 MHz
DDR Mode: DDR3
Total memory(MEMC 0): 1024MB
MEMC 0 DDR Width: 32
Boot Device: NAND
Total flash: 512MB
RTS VERSION: Initial RTS Version
ETH0_PHY: RGMII
ETH0_MDIO_MODE: 1
ETH0_SPEED: 1000
ETH0_PHYADDR: probe
Initializing USB.
USB: Locating Class 09 Vendor 0000 Product 0000: USB Root Hub
USB: Locating Class 09 Vendor 0000 Product 0000: USB Root Hub
USB: Locating Class 09 Vendor 0000 Product 0000: USB Root Hub
USB: Locating Class 09 Vendor 0000 Product 0000: USB Root Hub
CFE initialized.
USB: New device connected to bus 0 hub 1 port 1[J
USB: Resetting device on bus 0 hub 1 port 1[J
USB: Locating Class 08 Vendor 0930 Product 6544: Mass-Storage Device
USBMASS: Unit 0 connected[J
USB: New device connected to bus 1 hub 1 port 1[J
USB: Resetting device on bus 1 hub 1 port 1[J
USB: Locating Class 02 Vendor 04A3 Product 0101: Driver not found.
*** Could not find a valid partition...status=00000000, ids=83838205!
*** Could not find a valid partition...status=00000000, ids=83838205!
Starting splash screen.
No valid image found in flash0.splash - disabling splash
Executing STARTUP...
Loader:elf Filesys:raw Dev:flash0.kernel File: Options:(null)
Loading: Failed.
Could not load : I/O error
Trying again with '-nz' option
Loading: Failed.
Could not load : Not an ELF-format executable
CFE>