HDMU_17311_E2_at7500_217_git_616_Flash stürzt ab

[Surfacedj]

Das Image rebootet nach Flashen mit und ohne Sprachauswahl.

Gruss
Surfacedj

Log vom Erststart ohne setting übernahme


#Log file from Morlys SH4 STB Admin Tool from: Mo Jan 22 2018, 13:12:02

FrTs


INIT: version 2.88 booting

init frontpanel
WAIT 1 min
fsck.jfs version 1.1.15, 04-Mar-2011
processing started: 1/1/2000 1:00:04
The current device is: /dev/sda1

The superblock does not describe a correct jfs file system.

If device /dev/sda1 is valid and contains a jfs file system,
then both the primary and secondary superblocks are corrupt
and cannot be repaired, and fsck cannot continue.

Otherwise, make sure the entered device /dev/sda1 is correct.

[mountvirtfs] Mount /dev in tmpfs
[mountvirtfs] Copying device nodes to /dev
Starting portmap daemon....
Loading autofs
Starting autofs
[mountall] Mounting local filesystems...
Cleaning /tmp /var/run /var/lock.
Hostname: AT7500.
init stmfb
LOADING MODULES
load firmware
copLoadFile (file /boot/audio.elf)
ustslave: Kernel Version: 24
base_address 0x40400000
copLoadFile (file /boot/video.elf)
ustslave: Kernel Version: 24
base_address 0x40000000
init embx
init AVS
skip mpeg2
insmod: can't insert '/lib/modules/lnbh221.ko': unknown symbol in module, or unknown parameter
insmod: can't insert '/lib/modules/lnb_pio.ko': unknown symbol in module, or unknown parameter
insmod: can't insert '/lib/modules/lnb_a8293.ko': unknown symbol in module, or unknown parameter
insmod: can't insert '/lib/modules/avl2108.ko': unknown symbol in module, or unknown parameter
[mountall] Mounting local filesystems...
Deconfiguring network interfaces... [evremote2] Model: 'atevio7500'
[evremote2] vBoxType: 8 (atevio7500)
[evremote2] Input device name: "TDT RC event driver"
[evremote2] Remote selected: Fortis RemoteControl
[evremote2] RemoteControl Map:
Keyname Keyword KeyCode
--------------------------------------
MENU - 04 - 139
RED - 4B - 398
GREEN - 4A - 399
YELLOW - 49 - 400
BLUE - 48 - 401
EXIT - 1C - 174
TEXT - 0D - 388
EPG - 08 - 365
REWIND - 58 - 168
FASTFORWARD - 5C - 208
PLAY - 55 - 207
PAUSE - 07 - 119
RECORD - 56 - 167
STOP - 54 - 128
STANDBY - 0A - 116
MUTE - 0C - 113
CHANNELUP - 5E - 104
CHANNELDOWN - 5F - 109
VOLUMEUP - 4E - 115
VOLUMEDOWN - 4F - 114
INFO - 06 - 358
OK - 1F - 352
UP - 00 - 103
RIGHT - 02 - 106
DOWN - 01 - 108
LEFT - 03 - 105
BACK - 09 - 158
ZOOM - 0B - 372
VMODE - 0E - 47
RESOLUTION - 0F - 393
TVRADIO - 1A - 378
SLEEP - 1E - 142
OPEN - 40 - 361
FAV - 41 - 364
TIMER - 42 - 362
UPUP - 43 - 414
DOWNDOWN - 44 - 415
NEXT - 4C - 407
LAST - 50 - 412
PIP - 51 - 375
MEDIA - 52 - 226
LIST - 53 - 395
0BUTTON - 10 - 11
1BUTTON - 11 - 2
2BUTTON - 12 - 3
3BUTTON - 13 - 4
4BUTTON - 14 - 5
5BUTTON - 15 - 6
6BUTTON - 16 - 7
7BUTTON - 17 - 8
8BUTTON - 18 - 9
9BUTTON - 19 - 10
--------------------------------------
[evremote2] Frontpanel Map:
Keyname Keyword KeyCode
--------------------------------------
STANDBY - 00 - 116
OK - 06 - 352
MENU - 05 - 139
VOLUMEUP - 03 - 115
VOLUMEDOWN - 04 - 114
CHANNELUP - 01 - 104
CHANNELDOWN - 02 - 109
--------------------------------------
[evremote2] Supports Long KeyPress: yes
[evremote2 fortis] Period = 10, delay = 120
[evremote2] Using period = 10 delay = 120
showSinglePic /boot/bootlogo.mvi
VIDEO_SELECT_SOURCE MEMORY (Success)
VIDEO_PLAY (Success)
VIDEO_CONTINUE: (Success)
VIDEO_CLEAR_BUFFER: (Invalid argument)
ifdown: interface lo not configured
ifdown: interface eth0 not configured
ifdown: interface eth1 not configured
ifdown: interface wlan0 not configured
done.
Setting up IP spoofing protection: rp_filter.
Configuring network interfaces... udhcpc: started, v1.28.0
udhcpc: sending discover
udhcpc: sending select for 192.168.0.100
udhcpc: lease of 192.168.0.100 obtained, lease time 7200
route: SIOCDELRT: No such process
adding dns 83.169.186.161
adding dns 83.169.185.161
ip: SIOCGIFFLAGS: No such device
ip: SIOCGIFFLAGS: No such device
done.
[set_was_timer_wakeup] error reading /etc/enigma2/timers.xml
[set_was_timer_wakeup] no timer aktiv
starting e2->

/usr/bin/amixer: /usr/lib/libasound.so.2: no version information available (required by /usr/bin/amixer)
/usr/bin/amixer: /usr/lib/libasound.so.2: no version information available (required by /usr/bin/amixer)
/usr/bin/amixer: /usr/lib/libasound.so.2: no version information available (required by /usr/bin/amixer)
Simple mixer control 'Analog',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback -31 - 31
Mono: Playback 6 [60%] [on]
Simple mixer control 'SPDIF',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback -31 - 31
Mono: Playback 6 [60%] [on]
Simple mixer control 'HDMI',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback -31 - 31
Mono: Playback 6 [60%] [on]
rm: can't remove '/media/USB/RECORD': No such file or directory
rm: can't remove '/media/USB/SWAPPART': No such file or directory
rm: can't remove '/media/USB/MINI': No such file or directory
rm: can't remove '/media/USB/Record': No such file or directory
rm: can't remove '/media/USB/backup': No such file or directory
PYTHONPATH: /usr/lib/enigma2/python
DVB_API_VERSION 5 DVB_API_VERSION_MINOR 3
ENIGMA_DEBUG_LVL=3
[MAIN] executing main
no profile data available
libpng warning: iCCP: known incorrect sRGB profile
libpng warning: iCCP: cHRM chunk does not match sRGB
libpng warning: iCCP: known incorrect sRGB profile
libpng warning: iCCP: cHRM chunk does not match sRGB
[evremote2] KEY by code: 6C (DOWN)
[evremote2] KEY_PRESS - 6C 1
[evremote2] KEY by code: 6C (DOWN)
[evremote2] KEY by code: 6C (DOWN)
[evremote2] KEY_RELEASE - 6C gKeycode=00 nextKey=01 gNextKey=01 CAUSE: Timeout
[evremote2] KEY by code: 67 (UP)
[evremote2] KEY_PRESS - 67 1
[evremote2] KEY_RELEASE - 67 gKeycode=00 nextKey=01 gNextKey=01 CAUSE: Timeout
[evremote2] KEY by code: 67 (UP)
[evremote2] KEY_PRESS - 67 1
[evremote2] KEY by code: 67 (UP)
[evremote2] KEY by code: 67 (UP)
[evremote2] KEY_RELEASE - 67 gKeycode=00 nextKey=01 gNextKey=01 CAUSE: Timeout
[evremote2] KEY by code: 6C (DOWN)
[evremote2] KEY_PRESS - 6C 1
[evremote2] KEY by code: 6C (DOWN)
[evremote2] KEY by code: 6C (DOWN)
[evremote2] KEY_RELEASE - 6C gKeycode=00 nextKey=01 gNextKey=01 CAUSE: Timeout
[evremote2] KEY by code: 67 (UP)
[evremote2] KEY_PRESS - 67 1
[evremote2] KEY by code: 67 (UP)
[evremote2] KEY by code: 67 (UP)
[evremote2] KEY_RELEASE - 67 gKeycode=00 nextKey=01 gNextKey=01 CAUSE: Timeout
[evremote2] KEY by code: 160 (OK)
[evremote2] KEY_PRESS - 160 1
[evremote2] KEY by code: 160 (OK)
[evremote2] KEY by code: 160 (OK)
[evremote2] KEY_RELEASE - 160 gKeycode=00 nextKey=01 gNextKey=01 CAUSE: Timeout
[evremote2] KEY by code: 6C (DOWN)
[evremote2] KEY_PRESS - 6C 1
[evremote2] KEY by code: 6C (DOWN)
[evremote2] KEY by code: 6C (DOWN)
[evremote2] KEY_RELEASE - 6C gKeycode=00 nextKey=01 gNextKey=01 CAUSE: Timeout
[evremote2] KEY by code: 160 (OK)
[evremote2] KEY_PRESS - 160 1
Traceback (most recent call last):
File "usr/lib/enigma2/python/Components/ActionMap.py", line 65, in action
File "usr/lib/enigma2/python/Components/ActionMap.py", line 46, in action
File "usr/lib/enigma2/python/Screens/Wizard.py", line 376, in ok
File "usr/lib/enigma2/python/Screens/Wizard.py", line 350, in finished
IOError: [Errno 14] Bad address
[evremote2] KEY by code: 160 (OK)
[evremote2] KEY by code: 160 (OK)
[evremote2] KEY_RELEASE - 160 gKeycode=00 nextKey=01 gNextKey=01 CAUSE: Timeout
Killed
e2 ended <- RTV: 137
*
starting e2->

INIT: Switchin
INIT: Sending processes the TERM signal

Sending all processes the TERM signal...done.
Sending all processes the KILL signal...done.
Deactivating swap...umount: tmpfs busy - remounted read-only
done.
Unmounting local filesystems...umount: tmpfs busy - remounted read-only
done.
Rebooting... FrTs

[mountaineer]

Latest SF1028/AT7500 images usb do not load tuners...no tuners listed. Seems drivers or frontends arent being built.
Also have to exit out of initial setup as any video settings set off spinners and reboot..

thanks!

[Audioniek]

Probably this is caused by unknown symbols in the .ko files. This is a build problem, usually occurring when rebuilding either the kernel or the drivers, without rebuilding the other of the pair.

The occurrence of unknown symbols appears in the log; the kernel module having them is then not loaded (in this case apparently the tuner drivers).

Regards,

Audioniek.

[morly]

das problem beginnt, wie audioniek sagt, bereits beim fehler in insmod
kann die kernel modules nicht laden,
ich seh mir den buildprozess an, ob da der richtige eingetragen ist, ...

[clown]

Hello guys..
after few years of usage a system on flash i was decide to mode to USB mode.
As i can see, there is some build issue .., my SF1028 wont boot to HDMU image .. 609 or 617.
Is there some workaround to fix ko files, or is somebody here, who can post me link to HDMU_16614_E2_at7500_217_git_597 or something bootable and stable ?
I have this build installed in Flash, and works fine.

many thanks guys ..

[Audioniek]

Do you use the original factory bootloader 6.00? For USB you need a bootloader that is capable of booting an image from USB. For the SF1028 the only option I know of is the bootloader used with Titanit. Warning: bootloader changes are always risky and you may end up with reseller ID puzzles. I would stick to the image in flash; it is faster. The only reason to switch to USB would in my opinion be the ability to use factory firmware in flash and E2/Neutrino from USB.

Regards,

Audioniek.

[clown]

Helle,
sorry for mistake. I am able to boot, but latest images crash on Wizard .. , and if i exit on wizard, HDMU do not see a DVB-S2 tuners, so this is issue of incompatible KO files ?
I was run some HDMU image from mid 2017 in internal flash .., it works fine (BL 6). Because there is really no space left on device, i was decide to jump to USB images.
So i was install maxiboot, BP Neutrino and PKT works fine, but ..., it is not my cup of tea ? :). I am just devotee of HDMU. :).

rgds

[mumbi]

if i exit on wizard, HDMU do not see a DVB-S2 tuners
Test this: Exit on wizard and install a settings-plugin.

[Audioniek]

if i exit on wizard, HDMU do not see a DVB-S2 tuners, so this is issue of incompatible KO files ?

Probably still the same problem as flagged in posting #3.

Regards,

Audioniek.

- - - Aktualisiert - - -


Because there is really no space left on device, i was decide to jump to USB images.

Remove some or all of the WLAN drivers, They consume a lot of space and it is likely you only need one or none of them.

Regards,

Audioniek.