PDA

Archiv verlassen und diese Seite im Standarddesign anzeigen : Wie geht es weiter mit dem HDMU-Board???



flattervogel
31.12.2018, 16:00
Wie geht es weiter mit dem HDMU-Board???
Da hier im Board so gut wie nichts mehr los ist,stelle ich bewusst diese Frage.
Im vorigen Jahr fand eine Umfrage statt,welche SH4 Receiver noch supportet werden sollen,danach erschienen einige Imageversionen,die alle nicht lauffähig waren und seit Ende Januar!!! nichts mehr.
Sicher sind SH4 Receiver am Aussterben,machen trotzdem ein top Bild und zum HD schauen ausreichend.
Im Mips und ARM Bereich seit September keine Images mehr.
Damit ist die Abwanderung der Benutzer dieses Images nicht zu stoppen.Sicher machen der oder die Imagebauer alles in Ihrer Freizeit und Familie haben die meisten.
Ich lehne mich mal aus dem Fenster und behaupte,das Infos über den weiteren Werdegang,die User bestimmt interessiert.Also Hand aufs Herz und gebt uns bitte ein Feedback,zu den Fragen.


Trotzdem an alle User hier,einen guten Rutsch ins neue Jahr.

vISIOn
31.12.2018, 19:49
Es existieren noch einige an SH4 Boxen .. nicht jeder kauft alle 6 Monate neuen Receiver... echt schade,dies war die letzte Anlaufstelle für die Leute ... nicht jeder kann Images selber bauen wie wir...

Guten Rutsch

Leegmoorer
02.01.2019, 13:24
Vielleicht äußert sich ja noch ein Mod oder Bonkel selbst

sirtobie
02.01.2019, 19:00
Will hier keinem auf die Füße treten, aber ich glaube die Mod´s wissen selbst nicht ob und wie es hier weiter geht.
Ist sehr schade, ich selbst habe auch keine Box mehr auf der HDMU läuft. Auf meinen SH4 Boxen (Pingulux und GM Reloaded) läuft ein 7 Jahre altes Neutrino und für meine Edision OS mega gibt es kein HDMU Image.

flac
02.01.2019, 19:20
Genauso ist es @sirtobie.



Gruß

flac

Audioniek
03.01.2019, 16:27
ich glaube die Mod´s wissen selbst nicht ob und wie es hier weiter geht.

That is also my impression. Even suggestions for fixing the problems with the last SH4 images remained unanswered. Meanwhile: I am still busy keeping my SH4 git up to date and in most cases it should produce working SH4 images, although not with the HDMU features.

I also have a suggestion to the HDMU people. If you do not want to proceed with SH4, I am willing to offer a bi-monthly build of images with two proviso's:

I will only built for receivers I can also test (that is all Fortis except HS7420, Spark, Spark7162 (three variants), Topfield 7700HDPVR and Kathrein UFS912. It is also my impression that not being able to test the images built was the main source of all the problems;
The images should be downloadable from this board.


Each time I visit the board the topic Duckbox SH4 project always has visitors, often more than one. That topic and similar ones are my primary interest. So far I have also used this board as my private publishing platform to keep the community informed. I would regret seeing this go.

That was my 10 cents on the subject.

Regards,

Audioniek.

bonkel
04.01.2019, 13:55
Frohes neues
Ich werde keine hdmu images mehr für sh4 bauen

Audioniek reicht dir ein Ftp Zugang wo du Images hochlädst?


Für mips und arm wird was komme

Problem ist nur das es baut aber nicht und die Brauch ich nicht hochladen


Ich habe im Moment nur andere Sachen zu tun

Gesendet von meinem SM-G965F mit Tapatalk

Audioniek
05.01.2019, 12:49
Audioniek reicht dir ein Ftp Zugang wo du Images hochlädst?

Ja dass waere ein Moeglichkeit. Danke fueur die Gelegenheit. Machen wir mal weiter per PM; ich werde im Mittag oder Abend reagieren.

Gruesse,

Audioniek.

samkooke
06.01.2019, 13:38
hello Audioniek (http://www.hdmedia-universe.com/board/member.php?1349-Audioniek) and for the fortis range thanks.

ghani
06.01.2019, 18:15
Es gibt seit neusten ..

Open Vision-OE enigma2 images based on Open PLi sources für alle SH4 Boxen.

wer sich damit beschäftigen will, und testen.

Es fehlen noch einges zu fixen, hatte ein image für cuberevo's gebaut aber leider bleibt es sofort beim starten im sh4 hängen!

https://github.com/OpenVisionE2/openvision-oe (https://github.com/OpenVisionE2/openvision-oe)

Audioniek
06.01.2019, 19:10
Last status: Bonkel has facilitated a login on this ftp server and I have uploaded a test image for the HS8200/Atevio7500, built this afternoon and tested on my poor old Rebox RE-8500.

Regards,

Audioniek.

rmimo
09.01.2019, 15:52
Hallo Bonkel,


als erstes wollte ich dir mal meine tiefsten Respekt äusern wir kennen uns ja aus der AAF Zeit. Da Ich ich noch die kompletten Kathrein Receiver bei mir rumstehen habe UFC960 UFS912 und UFS 913 ist das für mich natülich sehr schade das nichts mehr kommt... wäre es möglich das du die letzten Image zu verfügen stellst?

Danke für deine Arbeit

flattervogel
11.01.2019, 19:56
Sorry,ich möchte hier niemanden auf den Schlips treten! Ich finde es Schade,das die Info SH4 Images werden nicht mehr gebaut, erst nach einem Jahr und Nachfrage veröffentlicht wird.
In dieser langen Zeitspanne,hätten sich der oder die User schon nach anderen Receiver umschauen können.

Audioniek
12.01.2019, 16:57
...,das die Info SH4 Images werden nicht mehr gebaut......

An einen Alternativ wird fleissig gearbeitet, Ein Bischen Geduld bitte.

Gruesse,

Audioniek.

flattervogel
12.01.2019, 20:27
An einen Alternativ wird fleissig gearbeitet, Ein Bischen Geduld bitte.

Gruesse,

Audioniek.


Das ist mir bekannt.Und Danke dafür!

Mir ging es nur um den verspäteten Informationsfluss seitens des Boardgründers.

Audioniek
13.01.2019, 17:11
@Bonkel (and everyone else of course),

The new login works and I have added some folders for the various receivers. Currently I am building a set of images for release. I will upload these when they are built and tested, so you will see them appearing one by one. I will give notice when they are all there.

I try to build the images in such a way that the current installation instructions are valid. The following set is being made:


Fortis HDbox: USB, as tar.gz, gst
Octagon1008: USB, as tar.gz, gst
Atevio7500: flash,.ird, epl3 (no gst due to limited flash space), loader 6.00
HS7110: USB, as uImage+root.img, gst, loader 6.XX
HS7420: USB, as uImage+root.img, gst, loader 6.XX
HS7810A: USB, as uImage+root.img, gst, loader 6.XX
HS7119: USB, as uImage+root.img, gst
HS7429: USB, as uImage+root.img, gst
HS7819: USB, as uImage+root.img, gst
HS7119: flash, .ird, gst (new)
HS7429: flash, .ird, gst (new)
HS7819: flash, .ird, gst (new)
Topfield TF77X0HDPVR: full install set for HDD, including tfinstaller files
Kathrein UFS912: USB, as tar.gz, gst
Kathrein UFS912: flash, epl3 (no gst due to limited flash space)


ResellerDs in Fortis .irds are always those for Octagon, and are part of the file name.

Regarding media framework: I am currently working on a combined gst/epl3 in the ServiceMP3 plugin, but have not got it working yet to my full satisfaction.

Regards,

Audioniek.

bonkel
13.01.2019, 20:27
Wenn die Zeit es erlaubt und die anderen Sachen bauen
Kann man aus Spass wieder sh4 anfangen

Aber im Moment ist das zu viel zu machen

bonkel
13.01.2019, 20:37
Wenn wird auch nur über oe gebaut, also falls das einfügen klappt und die anderen dann noch bauen...
ich will keine 2 systeme mehr

ghani
14.01.2019, 04:30
Hello Audioniek

and what about ipbox 900 and other model, there will be no image for it

pop1234
14.01.2019, 13:05
@ghani (http://www.hdmedia-universe.com/board/member.php?u=17)
send me your email or skype
thx

Audioniek
16.01.2019, 23:04
Hello Ghani,

As stated in a previous post, I will only build for receivers I can also test. Unfortunately IPboxes were not sold in my country. Meanwhile this decision has proved to be the right one: On sparks the remote control does not work in my image and tf7700's crash at the end of the install wizard. If anyone can get me a receiver to test with, I will gladly build for it, although the current set is already a lot of work for a single person. I hope you can understand. Those with Linux knowledge can build their own image, using my git as a starting point.

Regards,

Audioniek.

samkooke
16.01.2019, 23:29
good evening Audioniek impossible to build for hs7429 flash does not work.

pop1234
17.01.2019, 00:33
remote control spark (https://github.com/Audioniek/buildsystem/blob/2154e774802589c5a761515fc2df3499411de573/Patches/rc-models.patch#L207~L269)
you can use this spark.xml (https://raw.githubusercontent.com/OpenVisionE2/enigma2-openpli-sh4/develop/data/rc_models/spark.xml)

spartak73
17.01.2019, 20:30
@Bonkel (and everyone else of course),

The new login works and I have added some folders for the various receivers. Currently I am building a set of images for release. I will upload these when they are built and tested, so you will see them appearing one by one. I will give notice when they are all there.

I try to build the images in such a way that the current installation instructions are valid. The following set is being made:


Atevio7500: flash,.ird, epl3 (no gst due to limited flash space), loader 6.00



Kannst du auch USB Image für Atevio7500 bauen? Ich meine .tar.gz Image.

vISIOn
17.01.2019, 21:19
@ Audioniek

Ich habe irgendwo noch eine Vizyon 820 HD.Die sollte doch baugleich der IPBox 900 oder 910 sein oder?

Wenn das Ding noch funktioniert,kannste haben wenn du möchtest.

Ich suche mal und schaue ob noch funktioniert.Wenn ich noch was bei tragen kann... damit bisschen weiter geht gerne.Würde ich eh in den Müll werfen.

Gruß

neipe
17.01.2019, 22:42
Da schliese ich mich an, ich habe auch noch eine IPBOX9000 zuhause rumliegen, wann die haben willst, kannst die auch habn.

gabberhead
19.01.2019, 18:03
wollte mir gerade ein image für die kathrein 912 runterladen. besser gesagt das letztes aktuellste noch vom januar 2018 und einige versionen davor, aber sind keine mehr da zum runterladen. gibts eine möglichkeit die noch wo runter zu laden? wie gesagt die letzte vom januar 2018 und dann noch so die letzten 2-3 monate davor wäre gut, weil mit der letzten vom januar 2018 hatte ich was die senderlisten upload angeht etwas probleme mit meiner 912er die noch in kroatien steht. wollte mal ältere versionen mal probieren wenn ich wider da bin. bevor ich die letzte dort installiert hatte, hatte ich diese probleme nicht gehabt.

Audioniek
23.01.2019, 15:30
After a week of silence, another progress report. It that week of silence I have receives a hip prothesis and was in hospital. Today I have picked up the building of SH4 messages where I left off last week: fixing the non-working Spark remote and the crashing tf7700 in the install wizard.

Both vISIOn and neipe thank you for your offers for test receivers. I will get back to you via PM, as this would enable me to widen the palette of supported receivers and provide active support on them.

Regards,

Audioniek.
(http://www.hdmedia-universe.com/board/member.php?281-vISIOn)

- - - Aktualisiert - - -

@spartak73: Kann ich. Moechte denn gerne wissen welche Loader verwendet wird, damit ich es testen kann. gst kan im tar.gz hinzugefuegt werden, es gibt genuegend platz.

Gruesse,

Audioniek.

spartak73
23.01.2019, 15:40
Ich habe im menem Octagon-1028 Loader I-Boot von SoLaLa. Aber das hat mit USB image nicht zu tun oder? Ich möchte Image auf USB, in Flash bei mir immer noch Octagon Factory SW. Mit diesem Loader funktioneren alle gebaute Image für USB von HDMU, PKT und so weiter. :)
i

o
// Boot
// interactive
// by SoLaLa
^^^

U-Boot 1.3.1 (May 24 2011 - 23:08:52) - stm24_0047

Board: STx7105-PDK [32-bit 450 MHz non-overclocked mode]
DRAM: 256 MiB
NOR: 64 MiB
In: serial
Out: serial
Err: serial

pop1234
23.01.2019, 16:13
@Audioniek (http://www.hdmedia-universe.com/board/member.php?1349-Audioniek)
pls,You can reply to my PM

Audioniek
23.01.2019, 16:30
Maybe I am not looking in the right place but I have not got a PM from you from the last couple of days. Can you give it another try?

Regards,

Audioniek.

- - - Aktualisiert - - -


Aber das hat mit USB image nicht zu tun oder?

Doch, ein Bisschen. Die Original-Loader 6.00 kann mit Original-Bootargs kein USB-images starten. Deswegen mein Frage. Wird mal ein HS8200 mit i-Boot versehen.

Gruesse,

Audioniek.

pop1234
23.01.2019, 16:54
@Audioniek (http://www.hdmedia-universe.com/board/member.php?1349-Audioniek)
Check your PM

Audioniek
23.01.2019, 17:19
@pop1234: I have accepted your friends-request, however no PM was there.

- - - Aktualisiert - - -

Update: remote control problem with spark fixed, image uploaded. Now working of TF7700 installation wizard crash.

Regards,

Audioniek.

pop1234
23.01.2019, 17:22
@Audioniek
Check your PM now

flac
24.01.2019, 12:16
...bitte beim Thema bleiben.

Das gehört alles nicht mehr hierher.

Schaut auf die Themenüberschrift.



Gruß

flac

Audioniek
24.01.2019, 15:18
Update: Topfield TF7700HDPVR problems fixed; image built, tested and uploaded. Continuing with Fortis HS7119/7249/7819.

Regards,

Audioniek.

flac
24.01.2019, 19:20
@Audioniek... please stay with the topic.
It does not belong here anymore.
Look at the topic heading.

open a new topic


Greeting

flac

spartak73
27.01.2019, 15:52
Doch, ein Bisschen. Die Original-Loader 6.00 kann mit Original-Bootargs kein USB-images starten.

Ja natürlich Loader muss man ändern. Im Flash Octagon-1028 ist zu wenig Platz. USB version im .tar.gz ist optimal. ;)

flac
27.01.2019, 18:22
Da sich keiner dran halten will...

Mache ich hier zu !!!!


"Macht ein neues Thema im richtigen Bereich auf."

"Create a new topic in the right area."




Gruß

flac