PDA

Archiv verlassen und diese Seite im Standarddesign anzeigen : sh4 git E2-Pli Fehlerthread



bonkel
12.05.2012, 12:23
damits weiter geht ^^

Fundidun
18.05.2012, 16:55
I like this project, if they need help, we would be ready.

Greetings from the Spanish community, gmteam

bonkel
21.05.2012, 20:15
yes, there is a very big problem with the new pli based enigma2...
on hd channels, the gui is very slow ... switch back to an sd channel the gui is fast again..
i dont know what the problem is..

vISIOn
21.05.2012, 22:46
Das Prob kann ich auf Octagon 1028 net bestätigen... habe jetzt 2 Tage geschaut... nur HD und rannte alles Top... auf welcher STB hast du getestet

bonkel
21.05.2012, 23:12
es sollte alle betreffen...

bei sender mit 1920x1080....noch schlimmer merkt mans bei sender die mit emu frei sind

spark hs7810a sind boxen wo ich es 100% weiss das es so ist

Macbest
22.05.2012, 00:48
Auf meinem Pingulux ist es auch so. Ist aber nicht so dramatisch mit der Geschwindigkeit.

Fundidun
23.05.2012, 11:01
Hy, bonkel Look at this file test, published by Mr. Kowalski, about three hours ago

Download Open Pli Spark
(http://www.mediafire.com/?42n24rkbb8lym9f)

bonkel
23.05.2012, 11:23
?? i dont have a spark box to test any image...

so what are specials on this image?

Fundidun
23.05.2012, 11:45
?? i dont have a spark box to test any image...

so what are specials on this image?

That image, it works almost perfect for adapatar, open Pli sh4 processor, We are conducting tests on models Golden Media Reloaded, It may be one way to help in its development.

http://img39.imageshack.us/img39/2977/open1f.png

http://img513.imageshack.us/img513/6088/open3.jpg

Agagaguka
05.06.2012, 08:47
Hallo
nach software aufspielen alles ok box ausgeschatet box bootschleife was kann ich tun.

Thomas4711
05.06.2012, 10:40
Hast du einen log?

bonkel
05.06.2012, 16:04
Hallo
nach software aufspielen alles ok box ausgeschatet box bootschleife was kann ich tun.
dafür brauchen wir kein log...das is nen spark problem

nach aufspielen der software, durch den assi durch gehen und dann hinten am schalter box ausschalten
danach wieder einschalten und dann funzt die box erst richtig

abdellove
09.06.2012, 15:36
hi,

want to say, latest image 574 in mediaplayer is better with playing mkv files, but one thing hopenly will also be better by playing the subs. by yellow button i can select the srt subs but it don't show in the movie.

all for all image is going better and better....props for me!

serouja
14.07.2012, 12:09
Hello
is it possible to add dropbear ssh server to this build i'm using the HDMU image for SE 1008P SE+, and is it possible to install optware in E2.

thanx a lot.

mocart111
26.09.2012, 15:00
Здравствуйте. Помогите. Загрузил enigmu2 в GI 8120. Вроде все нормально,но не могу попасть в эмулятор 1.35 через DCC. Как быть? Спасибо.

Joker7
26.09.2012, 15:27
Please write in German or English... not in Russian...


Google-Translate the question:


Hello Help. Uploaded enigma2 in GI 8120. It feels good, but I can not get the emulator 1.35 by DCC. What to do? Thank you.

zdzislaw22
27.10.2012, 10:39
hey,

I tried today compilation of max-tdt for spark stm211, but it fails with the following error. Of course dbox/avs_core.h is in the path. Does anyone know by chance where the problem could be?

make[1]: Entering directory `/DuckboxDisk/max-tdt/tdt/cvs/cdk/libtuxtxt'
make all-am
make[2]: Entering directory `/DuckboxDisk/max-tdt/tdt/cvs/cdk/libtuxtxt'
/bin/sh ./libtool --tag=CC --mode=compile sh4-linux-gcc -DHAVE_CONFIG_H -I. -I/max-tdt/tdt/tufsbox/cdkroot/usr/include/freetype2 -I/max-tdt/tdt/tufsbox/cdkroot/usr/include -I/max-tdt/tdt/tufsbox/cdkroot/usr/include -pipe -O2 -MT libtuxtxt.lo -MD -MP -MF .deps/libtuxtxt.Tpo -c -o libtuxtxt.lo libtuxtxt.c
Duckbox-libtool: compile: sh4-linux-gcc -DHAVE_CONFIG_H -I. -I/max-tdt/tdt/tufsbox/cdkroot/usr/include/freetype2 -I/max-tdt/tdt/tufsbox/cdkroot/usr/include -I/max-tdt/tdt/tufsbox/cdkroot/usr/include -pipe -O2 -MT libtuxtxt.lo -MD -MP -MF .deps/libtuxtxt.Tpo -c libtuxtxt.c -fPIC -DPIC -o .libs/libtuxtxt.o
In file included from tuxtxt_common.h:4:0,
from libtuxtxt.c:40:
./config.h:26:0: warning: "DEBUG" redefined [enabled by default]
libtuxtxt.c:25:0: note: this is the location of the previous definition
In file included from tuxtxt_common.h:16:0,
from libtuxtxt.c:40:
tuxtxt_def.h:41:27: fatal error: dbox/avs_core.h: No such file or directory
compilation terminated.
make[2]: *** [libtuxtxt.lo] Error 1
make[2]: Leaving directory `/DuckboxDisk/max-tdt/tdt/cvs/cdk/libtuxtxt'
make[1]: *** [all] Error 2
make[1]: Leaving directory `/DuckboxDisk/max-tdt/tdt/cvs/cdk/libtuxtxt'
make: *** [.deps/tuxtxtlib.do_compile] Error 2


EDIT: Found solution on AAF:

in $HOME/Archive mal libtuxtxt.git löschen

juxan
04.11.2012, 13:11
Hi! Seit kurzem bin ich auch ein stolzer besitzer einer Kathrein ufs913. Am anfang habe ich versucht ein AAF Image zu benutzen, aber es leufte nicht alles rund und glatt, nun bin ich auf diesen Forum gekommen und muss sagen dieser Image ist supper obwohl es auch noch eine betta ist. Meine Kathrein ist mit einer T90 Sat Anlage verbunden und es sind 8 LNB angeschlossen, darum möchte ich fragen wie kann man mehr Satelliten in die sateliten.xml einfugen. Ich finde nicht wo befindet sich diese datei in Image, bitte helfen Sie mir.

santa
04.11.2012, 13:13
lad dir einfach über erweiterungen eine andere satellit.xml herunter, alternativ wurde hier im Forum schon mal
gepostet, wo man sich eine eigene zusammenstellen kann.

bonkel
04.11.2012, 13:13
kannst du doch vom feed laden, also unter erweiterungen

juxan
04.11.2012, 13:40
Ich habe jetzt fon zwei oder drei settings heruntergeladen, aber so wie es aussiet es drehte sich in allen settings listen nur um 4 satelliten und zwar 28° 23,5° 19,2° und 13° der rest fehlt mir ist wichtig zumbeischpil 4,8° 16° 32° 45°53° und und und, und das alles ist nich da. Bitte sagen sSie mir bitte wo oder in weilchem ordner befindet sich die satelliten.xml damit mann sie manuel beifügen kann. Danke!

bonkel
04.11.2012, 13:43
du musst auch die satellites.xml runterladen...

santa
04.11.2012, 13:45
/etc/tuxbox

dort kannst du die manuell bearbeiten.

juxan
04.11.2012, 13:49
Ich ferstehe das feleicht falsch,aber da gibt ja keine satelliten.xml sondern nur setting. Ich mache so: menü/erweiterungen/download/grüne taste/settings/.......

juxan
04.11.2012, 13:49
/etc/tuxbox

dort kannst du die manuell bearbeiten.
Danke Dir!!!!!!!!!!!!!!!!!

bonkel
04.11.2012, 13:53
Ich ferstehe das feleicht falsch,aber da gibt ja keine satelliten.xml sondern nur setting. Ich mache so: menü/erweiterungen/download/grüne taste/settings/.......
da ist auch ne satellites.xml..
richtig lesen!

santa
04.11.2012, 13:55
reinhard satellites.xml um genau zu seiin.

juxan
04.11.2012, 14:01
reinhard satellites.xml um genau zu seiin.
diese liste habe ich auch runtergeladen, aber da waren NUR 4 satelitten: 28° 23,5° 19,2° und 13°. es tut mir leid, aber sofiel kann ich lehsen.

juxan
04.11.2012, 14:33
Mit der satelliten.xml ist jetzt alles in ordnung, ich habe es manuel hinzugefügt.Danke an Eure hilfe!
Ich habe noch eine andere frage, kann man in diesem Image aufgenommene filme schneiden, werbung herausscheiden zumbeischpil.?

santa
04.11.2012, 14:55
theoretisch ja, praktisch nein.
Es gibt ein Plugin Moviecut, bisher habe ich nur gelesen das dies aber nicht richtig geht.
Habe ich aber nur beim Topf bisher gelesen.

juxan
04.11.2012, 15:17
ok danke für das info, demnechst probiere ich mall.

Unregistriert
05.11.2012, 19:06
Hallo zusammen,

erstmal vielen Dank für das geniale Image. Leider habe ich mit dem Permanent Timeshift Plugin ein Problem:

Sobald das Plugin aktiv ist, kann ich die Sender nicht mehr wechseln wenn ich die Nummer auf der Fernbedienung drücke. Wenn ich im normalen Timeshift bin (aktiviert mit der Pause Taste) kann ich mit der Taste 1 zb ein paar Sekunden zurückspulen. Wenn aber Permanent Timeshift aktiv ist, dann erscheint die Kanalwechsel Meldung in der ich den neuen Kanel eingeben kann (Kanal: 10) Leider stürzt danach der Receiver immer ab.

Damit kann ich alle Nummern nicht mehr nutzen (weder zum spulen noch zum umschalten). Ich habe daher das Plugin deaktiviert, auch wenn ich es gerne nutzen würde.

GM990 + mit der GIT 4844 Version von HDMU.

Könnt ihr euch das bitte mal anschauen?

Danke :)

Dewin92
21.12.2012, 21:51
beim pingulux funktioniert das MgCamd nicht :s

bonkel
21.12.2012, 21:52
und was hat das mit imagebau zu tun ?

Dewin92
21.12.2012, 22:00
naja mgcamd geht nicht und ich würde es gern beheben?^^

bonkel
21.12.2012, 22:01
der fehler liegt bei dir...

und hier wird es kein support dafür geben

Dewin92
21.12.2012, 22:03
wieso nicht? das plugin ist doch von "euch" implementiert

santa
21.12.2012, 22:04
die boardregel hast du aber gelesen?
Wir können das auch vom feed entfernen wenn dir das lieber ist.

bonkel
21.12.2012, 22:06
hier gehts um fehler die das pli image aus dem git betreffen und nich um irgendwelche plugins

Dewin92
21.12.2012, 22:10
jaa klaro

nein es geht mir ja nicht darum, dass es im feed ist oder sonst etwas. ich wollte eig nur wissen woran es liegt... ich wollte hier kein stress oder "rummuken" es sollte nur eine hilfsanfrage sein. aber definitiv kein rumgenörgel.

wo könnten man denn diesbezüglich hilfe bekommen? im zusammenhang mit eurem hdmu images und mgcamd

Joker7
21.12.2012, 22:10
die boardregel hast du aber gelesen?
Wir können das auch vom feed entfernen wenn dir das lieber ist.


..nö,warum...wenn jemand damit nichts "vernünftiges" anfangen kann..ist es nicht das Prob des Images :)

Dewin92
21.12.2012, 22:17
hier gehts um fehler die das pli image aus dem git betreffen und nich um irgendwelche plugins

ok das ist eine Ansage => und nu bin ich ruhig! :D

liab
14.10.2013, 11:46
Bis auf bei pinky1981 fehlen bei allen sh4 git's DVB-T Transponder für Köln in der terrestrial.xml. Richtig ist:


<terrestrial name="Koeln/Bonn(de)" flags="5">
<transponder centre_frequency="514000000" bandwidth="0" constellation="1" code_rate_hp="1" code_rate_lp="6" guard_interval="3" transmission_mode="1" hierarchy_information="0" inversion="2" />
<transponder centre_frequency="538000000" bandwidth="0" constellation="1" code_rate_hp="1" code_rate_lp="6" guard_interval="3" transmission_mode="1" hierarchy_information="0" inversion="2" />
<transponder centre_frequency="594000000" bandwidth="0" constellation="1" code_rate_hp="1" code_rate_lp="6" guard_interval="3" transmission_mode="1" hierarchy_information="0" inversion="2" />
<transponder centre_frequency="650000000" bandwidth="0" constellation="1" code_rate_hp="1" code_rate_lp="6" guard_interval="3" transmission_mode="1" hierarchy_information="0" inversion="2" />
<transponder centre_frequency="698000000" bandwidth="0" constellation="1" code_rate_hp="1" code_rate_lp="6" guard_interval="3" transmission_mode="1" hierarchy_information="0" inversion="2" />
<transponder centre_frequency="706000000" bandwidth="0" constellation="1" code_rate_hp="1" code_rate_lp="6" guard_interval="3" transmission_mode="1" hierarchy_information="0" inversion="2" />
<transponder centre_frequency="730000000" bandwidth="0" constellation="1" code_rate_hp="1" code_rate_lp="6" guard_interval="3" transmission_mode="1" hierarchy_information="0" inversion="2" />
<transponder centre_frequency="826000000" bandwidth="0" constellation="1" code_rate_hp="1" code_rate_lp="6" guard_interval="3" transmission_mode="1" hierarchy_information="0" inversion="2" />
<transponder centre_frequency="834000000" bandwidth="0" constellation="1" code_rate_hp="1" code_rate_lp="6" guard_interval="3" transmission_mode="1" hierarchy_information="0" inversion="2" />
</terrestrial>

comag
28.04.2014, 10:57
hello if anyone can help with this error

BUILDING TITAN SH4 for Spark GM990

( ubuntu 12.04 )





root@tas-Lenovo-G500:/home/tas/tdt/tdt/cvs/cdk# ./setuptdt.sh
Czytanie list pakietów... Gotowe
Budowanie drzewa zależności
Odczyt informacji o stanie... Gotowe
automake jest już w najnowszej wersji.
autopoint jest już w najnowszej wersji.
bison jest już w najnowszej wersji.
ccache jest już w najnowszej wersji.
doc-base jest już w najnowszej wersji.
fakeroot jest już w najnowszej wersji.
flex jest już w najnowszej wersji.
g++ jest już w najnowszej wersji.
gawk jest już w najnowszej wersji.
gcc-multilib jest już w najnowszej wersji.
gettext jest już w najnowszej wersji.
git-core jest już w najnowszej wersji.
gperf jest już w najnowszej wersji.
help2man jest już w najnowszej wersji.
lib32z1-dev jest już w najnowszej wersji.
libgpgme11-dev jest już w najnowszej wersji.
liblzo2-dev jest już w najnowszej wersji.
libncurses5-dev jest już w najnowszej wersji.
libtool jest już w najnowszej wersji.
patch jest już w najnowszej wersji.
pkg-config jest już w najnowszej wersji.
ruby jest już w najnowszej wersji.
swig jest już w najnowszej wersji.
texi2html jest już w najnowszej wersji.
texinfo jest już w najnowszej wersji.
wget jest już w najnowszej wersji.
xfslibs-dev jest już w najnowszej wersji.
zlib1g-dev jest już w najnowszej wersji.
cfv jest już w najnowszej wersji.
dialog jest już w najnowszej wersji.
libsdl-image1.2 jest już w najnowszej wersji.
libsdl-image1.2-dev jest już w najnowszej wersji.
cmake jest już w najnowszej wersji.
libc6-dev-i386 jest już w najnowszej wersji.
libcurl4-openssl-dev jest już w najnowszej wersji.
libglib2.0-bin jest już w najnowszej wersji.
libglib2.0-dev jest już w najnowszej wersji.
lsb-release jest już w najnowszej wersji.
make jest już w najnowszej wersji.
rpm jest już w najnowszej wersji.
subversion jest już w najnowszej wersji.
0 aktualizowanych, 0 nowo instalowanych, 0 usuwanych i 0 nieaktualizowanych.
root@tas-Lenovo-G500:/home/tas/tdt/tdt/cvs/cdk#








----------------------------------------------------------------------
Libraries have been installed in:
/home/tas/Pulpit/tas/tdt/tdt/tufsbox/cdkroot/lib

If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the `-LLIBDIR'
flag during linking and do at least one of the following:
- add LIBDIR to the `LD_LIBRARY_PATH' environment variable
during execution
- add LIBDIR to the `LD_RUN_PATH' environment variable
during linking
- use the `-Wl,-rpath -Wl,LIBDIR' linker flag
- have your system administrator add LIBDIR to `/etc/ld.so.conf'

See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
make[3]: Nie ma nic do zrobienia w `install-data-am'.
make[3]: Opuszczenie katalogu `/home/tas/tdt/tdt/cvs/apps/misc/tools/libmme_host'
make[2]: Opuszczenie katalogu `/home/tas/tdt/tdt/cvs/apps/misc/tools/libmme_host'
Making install in libmmeimage
make[2]: Wejście do katalogu `/home/tas/tdt/tdt/cvs/apps/misc/tools/libmmeimage'
make[3]: Wejście do katalogu `/home/tas/tdt/tdt/cvs/apps/misc/tools/libmmeimage'
/bin/mkdir -p '/home/tas/Pulpit/tas/tdt/tdt/tufsbox/cdkroot/lib'
/bin/sh ../libtool --mode=install /usr/bin/install -c libmmeimage.la '/home/tas/Pulpit/tas/tdt/tdt/tufsbox/cdkroot/lib'
Duckbox-libtool: install: /usr/bin/install -c .libs/libmmeimage.so.0.0.0 /home/tas/Pulpit/tas/tdt/tdt/tufsbox/cdkroot/lib/libmmeimage.so.0.0.0
Duckbox-libtool: install: (cd /home/tas/Pulpit/tas/tdt/tdt/tufsbox/cdkroot/lib && { ln -s -f libmmeimage.so.0.0.0 libmmeimage.so.0 || { rm -f libmmeimage.so.0 && ln -s libmmeimage.so.0.0.0 libmmeimage.so.0; }; })
Duckbox-libtool: install: (cd /home/tas/Pulpit/tas/tdt/tdt/tufsbox/cdkroot/lib && { ln -s -f libmmeimage.so.0.0.0 libmmeimage.so || { rm -f libmmeimage.so && ln -s libmmeimage.so.0.0.0 libmmeimage.so; }; })
Duckbox-libtool: install: /usr/bin/install -c .libs/libmmeimage.lai /home/tas/Pulpit/tas/tdt/tdt/tufsbox/cdkroot/lib/libmmeimage.la
Duckbox-libtool: install: /usr/bin/install -c .libs/libmmeimage.a /home/tas/Pulpit/tas/tdt/tdt/tufsbox/cdkroot/lib/libmmeimage.a
Duckbox-libtool: install: chmod 644 /home/tas/Pulpit/tas/tdt/tdt/tufsbox/cdkroot/lib/libmmeimage.a
Duckbox-libtool: install: sh4-linux-ranlib /home/tas/Pulpit/tas/tdt/tdt/tufsbox/cdkroot/lib/libmmeimage.a
Duckbox-libtool: finish: PATH="/home/tas/Pulpit/tas/tdt/tdt/tufsbox/host/ccache-bin:/home/tas/Pulpit/tas/tdt/tdt/tufsbox/devkit/sh4/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/sbin:/sbin" ldconfig -n /home/tas/Pulpit/tas/tdt/tdt/tufsbox/cdkroot/lib
----------------------------------------------------------------------
Libraries have been installed in:
/home/tas/Pulpit/tas/tdt/tdt/tufsbox/cdkroot/lib

If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the `-LLIBDIR'
flag during linking and do at least one of the following:
- add LIBDIR to the `LD_LIBRARY_PATH' environment variable
during execution
- add LIBDIR to the `LD_RUN_PATH' environment variable
during linking
- use the `-Wl,-rpath -Wl,LIBDIR' linker flag
- have your system administrator add LIBDIR to `/etc/ld.so.conf'

See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
make[3]: Nie ma nic do zrobienia w `install-data-am'.
make[3]: Opuszczenie katalogu `/home/tas/tdt/tdt/cvs/apps/misc/tools/libmmeimage'
make[2]: Opuszczenie katalogu `/home/tas/tdt/tdt/cvs/apps/misc/tools/libmmeimage'
Making install in ipbox_eeprom
make[2]: Wejście do katalogu `/home/tas/tdt/tdt/cvs/apps/misc/tools/ipbox_eeprom'
make[3]: Wejście do katalogu `/home/tas/tdt/tdt/cvs/apps/misc/tools/ipbox_eeprom'
/bin/mkdir -p '/home/tas/Pulpit/tas/tdt/tdt/tufsbox/cdkroot/bin'
/bin/sh ../libtool --mode=install /usr/bin/install -c eeprom '/home/tas/Pulpit/tas/tdt/tdt/tufsbox/cdkroot/bin'
Duckbox-libtool: install: /usr/bin/install -c eeprom /home/tas/Pulpit/tas/tdt/tdt/tufsbox/cdkroot/bin/eeprom
make[3]: Nie ma nic do zrobienia w `install-data-am'.
make[3]: Opuszczenie katalogu `/home/tas/tdt/tdt/cvs/apps/misc/tools/ipbox_eeprom'
make[2]: Opuszczenie katalogu `/home/tas/tdt/tdt/cvs/apps/misc/tools/ipbox_eeprom'
make[2]: Wejście do katalogu `/home/tas/tdt/tdt/cvs/apps/misc/tools'
make[3]: Wejście do katalogu `/home/tas/tdt/tdt/cvs/apps/misc/tools'
make[3]: Nie ma nic do zrobienia w `install-exec-am'.
make[3]: Nie ma nic do zrobienia w `install-data-am'.
make[3]: Opuszczenie katalogu `/home/tas/tdt/tdt/cvs/apps/misc/tools'
make[2]: Opuszczenie katalogu `/home/tas/tdt/tdt/cvs/apps/misc/tools'
make[1]: Opuszczenie katalogu `/home/tas/tdt/tdt/cvs/apps/misc/tools'
touch .deps/misc-tools
touch .deps/yaud-none
( rm -rf libtuxtxt || /bin/true ) && (rm -rf libtuxtxt; cp -a /home/tas/Archive/libtuxtxt.git/libtuxtxt libtuxtxt) && ( cd libtuxtxt && chmod +w -R .; patch -p1 < ../Patches/tuxtxtlib-1.0-fix_dbox_headers.diff )
patching file tuxtxt_common.h
patching file tuxtxt_def.h
export PATH=/home/tas/Pulpit/tas/tdt/tdt/tufsbox/host/bin:/home/tas/Pulpit/tas/tdt/tdt/tufsbox/host/ccache-bin:/home/tas/Pulpit/tas/tdt/tdt/tufsbox/devkit/sh4/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/sbin && \
cd libtuxtxt && \
aclocal -I /home/tas/Pulpit/tas/tdt/tdt/tufsbox/host/share/aclocal && \
autoheader && \
autoconf && \
automake --foreign && \
libtoolize --force && \
source /home/tas/tdt/tdt/cvs/cdk/build.env && \
./configure \
--build=x86_64-unknown-linux-gnu \
--host=sh4-linux \
--prefix=/usr \
--with-boxtype=generic \
--with-configdir=/etc \
--with-datadir=/usr/share/tuxtxt \
--with-fontdir=/usr/share/fonts && \
make all && \
perl -pi -e "s,^prefix=.*$,prefix=/home/tas/Pulpit/tas/tdt/tdt/tufsbox/cdkroot/usr," tuxbox-tuxtxt.pc && make install prefix=/usr DESTDIR=/home/tas/Pulpit/tas/tdt/tdt/tufsbox/cdkroot && perl -pi -e "s,^libdir=.*$,libdir='/home/tas/Pulpit/tas/tdt/tdt/tufsbox/cdkroot/usr/lib'," /home/tas/Pulpit/tas/tdt/tdt/tufsbox/cdkroot/usr/lib/libtuxtxt.la
Makefile.am: required file `../depcomp' not found
Makefile.am: `automake --add-missing' can install `depcomp'
make: *** [.deps/tuxtxtlib] Błąd 1
tas@tas-Lenovo-G500:~/tdt/tdt/cvs/cdk$

DboxOldie
28.04.2014, 15:07
depcomp is a Shell script in:
.../tdt/tufsbox/host/share/automake-1.11
and in ../tdt/cvs/cdk must be a symlink on it.
May be there is something wrong in tdt-git ???
I don´t know > I use max-git.

TheChip
28.04.2014, 15:33
hello if anyone can help with this error

BUILDING TITAN SH4 for Spark GM990

( ubuntu 12.04 )


We do not support the commercial software titan!

Lizard-
03.05.2014, 23:40
tiTan is closed, you can only build plugins for tiTan from git.

comag
05.05.2014, 15:49
ok thank you understand

building enigma2-pli, and I have this error






make[8]: Wejście do katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib/python/Plugins/Extensions/ModemSettings'
Making all in icons
make[9]: Wejście do katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib/python/Plugins/Extensions/ModemSettings/icons'
make[9]: Nie ma nic do zrobienia w `all'.
make[9]: Opuszczenie katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib/python/Plugins/Extensions/ModemSettings/icons'
make[9]: Wejście do katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib/python/Plugins/Extensions/ModemSettings'
make[9]: Nie ma nic do zrobienia w `all-am'.
make[9]: Opuszczenie katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib/python/Plugins/Extensions/ModemSettings'
make[8]: Opuszczenie katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib/python/Plugins/Extensions/ModemSettings'
Making all in DVDPlayer
make[8]: Wejście do katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib/python/Plugins/Extensions/DVDPlayer'
make[8]: Nie ma nic do zrobienia w `all'.
make[8]: Opuszczenie katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib/python/Plugins/Extensions/DVDPlayer'
make[8]: Wejście do katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib/python/Plugins/Extensions'
make[8]: Nie ma nic do zrobienia w `all-am'.
make[8]: Opuszczenie katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib/python/Plugins/Extensions'
make[7]: Opuszczenie katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib/python/Plugins/Extensions'
Making all in SystemPlugins
make[7]: Wejście do katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib/python/Plugins/SystemPlugins'
Making all in SoftwareManager
make[8]: Wejście do katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib/python/Plugins/SystemPlugins/SoftwareManager'
Making all in meta
make[9]: Wejście do katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib/python/Plugins/SystemPlugins/SoftwareManager/meta'
make[9]: Nie ma nic do zrobienia w `all'.
make[9]: Opuszczenie katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib/python/Plugins/SystemPlugins/SoftwareManager/meta'
make[9]: Wejście do katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib/python/Plugins/SystemPlugins/SoftwareManager'
make[9]: Nie ma nic do zrobienia w `all-am'.
make[9]: Opuszczenie katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib/python/Plugins/SystemPlugins/SoftwareManager'
make[8]: Opuszczenie katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib/python/Plugins/SystemPlugins/SoftwareManager'
Making all in PositionerSetup
make[8]: Wejście do katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib/python/Plugins/SystemPlugins/PositionerSetup'
Making all in meta
make[9]: Wejście do katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib/python/Plugins/SystemPlugins/PositionerSetup/meta'
make[9]: Nie ma nic do zrobienia w `all'.
make[9]: Opuszczenie katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib/python/Plugins/SystemPlugins/PositionerSetup/meta'
make[9]: Wejście do katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib/python/Plugins/SystemPlugins/PositionerSetup'
make[9]: Nie ma nic do zrobienia w `all-am'.
make[9]: Opuszczenie katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib/python/Plugins/SystemPlugins/PositionerSetup'
make[8]: Opuszczenie katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib/python/Plugins/SystemPlugins/PositionerSetup'
Making all in Satfinder
make[8]: Wejście do katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib/python/Plugins/SystemPlugins/Satfinder'
Making all in meta
make[9]: Wejście do katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib/python/Plugins/SystemPlugins/Satfinder/meta'
make[9]: Nie ma nic do zrobienia w `all'.
make[9]: Opuszczenie katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib/python/Plugins/SystemPlugins/Satfinder/meta'
make[9]: Wejście do katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib/python/Plugins/SystemPlugins/Satfinder'
make[9]: Nie ma nic do zrobienia w `all-am'.
make[9]: Opuszczenie katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib/python/Plugins/SystemPlugins/Satfinder'
make[8]: Opuszczenie katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib/python/Plugins/SystemPlugins/Satfinder'
Making all in SkinSelector
make[8]: Wejście do katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib/python/Plugins/SystemPlugins/SkinSelector'
Making all in meta
make[9]: Wejście do katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib/python/Plugins/SystemPlugins/SkinSelector/meta'
make[9]: Nie ma nic do zrobienia w `all'.
make[9]: Opuszczenie katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib/python/Plugins/SystemPlugins/SkinSelector/meta'
make[9]: Wejście do katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib/python/Plugins/SystemPlugins/SkinSelector'
make[9]: Nie ma nic do zrobienia w `all-am'.
make[9]: Opuszczenie katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib/python/Plugins/SystemPlugins/SkinSelector'
make[8]: Opuszczenie katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib/python/Plugins/SystemPlugins/SkinSelector'
Making all in SatelliteEquipmentControl
make[8]: Wejście do katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib/python/Plugins/SystemPlugins/SatelliteEquipmentControl'
Making all in meta
make[9]: Wejście do katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib/python/Plugins/SystemPlugins/SatelliteEquipmentControl/meta'
make[9]: Nie ma nic do zrobienia w `all'.
make[9]: Opuszczenie katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib/python/Plugins/SystemPlugins/SatelliteEquipmentControl/meta'
make[9]: Wejście do katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib/python/Plugins/SystemPlugins/SatelliteEquipmentControl'
make[9]: Nie ma nic do zrobienia w `all-am'.
make[9]: Opuszczenie katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib/python/Plugins/SystemPlugins/SatelliteEquipmentControl'
make[8]: Opuszczenie katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib/python/Plugins/SystemPlugins/SatelliteEquipmentControl'
Making all in Videomode
make[8]: Wejście do katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib/python/Plugins/SystemPlugins/Videomode'
Making all in meta
make[9]: Wejście do katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib/python/Plugins/SystemPlugins/Videomode/meta'
make[9]: Nie ma nic do zrobienia w `all'.
make[9]: Opuszczenie katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib/python/Plugins/SystemPlugins/Videomode/meta'
make[9]: Wejście do katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib/python/Plugins/SystemPlugins/Videomode'
make[9]: Nie ma nic do zrobienia w `all-am'.
make[9]: Opuszczenie katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib/python/Plugins/SystemPlugins/Videomode'
make[8]: Opuszczenie katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib/python/Plugins/SystemPlugins/Videomode'
Making all in VideoTune
make[8]: Wejście do katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib/python/Plugins/SystemPlugins/VideoTune'
Making all in meta
make[9]: Wejście do katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib/python/Plugins/SystemPlugins/VideoTune/meta'
make[9]: Nie ma nic do zrobienia w `all'.
make[9]: Opuszczenie katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib/python/Plugins/SystemPlugins/VideoTune/meta'
make[9]: Wejście do katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib/python/Plugins/SystemPlugins/VideoTune'
make[9]: Nie ma nic do zrobienia w `all-am'.
make[9]: Opuszczenie katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib/python/Plugins/SystemPlugins/VideoTune'
make[8]: Opuszczenie katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib/python/Plugins/SystemPlugins/VideoTune'
Making all in Hotplug
make[8]: Wejście do katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib/python/Plugins/SystemPlugins/Hotplug'
Making all in meta
make[9]: Wejście do katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib/python/Plugins/SystemPlugins/Hotplug/meta'
make[9]: Nie ma nic do zrobienia w `all'.
make[9]: Opuszczenie katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib/python/Plugins/SystemPlugins/Hotplug/meta'
make[9]: Wejście do katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib/python/Plugins/SystemPlugins/Hotplug'
make[9]: Nie ma nic do zrobienia w `all-am'.
make[9]: Opuszczenie katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib/python/Plugins/SystemPlugins/Hotplug'
make[8]: Opuszczenie katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib/python/Plugins/SystemPlugins/Hotplug'
Making all in DefaultServicesScanner
make[8]: Wejście do katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib/python/Plugins/SystemPlugins/DefaultServicesScanner'
Making all in meta
make[9]: Wejście do katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib/python/Plugins/SystemPlugins/DefaultServicesScanner/meta'
make[9]: Nie ma nic do zrobienia w `all'.
make[9]: Opuszczenie katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib/python/Plugins/SystemPlugins/DefaultServicesScanner/meta'
make[9]: Wejście do katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib/python/Plugins/SystemPlugins/DefaultServicesScanner'
make[9]: Nie ma nic do zrobienia w `all-am'.
make[9]: Opuszczenie katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib/python/Plugins/SystemPlugins/DefaultServicesScanner'
make[8]: Opuszczenie katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib/python/Plugins/SystemPlugins/DefaultServicesScanner'
Making all in DiseqcTester
make[8]: Wejście do katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib/python/Plugins/SystemPlugins/DiseqcTester'
Making all in meta
make[9]: Wejście do katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib/python/Plugins/SystemPlugins/DiseqcTester/meta'
make[9]: Nie ma nic do zrobienia w `all'.
make[9]: Opuszczenie katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib/python/Plugins/SystemPlugins/DiseqcTester/meta'
make[9]: Wejście do katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib/python/Plugins/SystemPlugins/DiseqcTester'
make[9]: Nie ma nic do zrobienia w `all-am'.
make[9]: Opuszczenie katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib/python/Plugins/SystemPlugins/DiseqcTester'
make[8]: Opuszczenie katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib/python/Plugins/SystemPlugins/DiseqcTester'
Making all in CableScan
make[8]: Wejście do katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib/python/Plugins/SystemPlugins/CableScan'
make[8]: Nie ma nic do zrobienia w `all'.
make[8]: Opuszczenie katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib/python/Plugins/SystemPlugins/CableScan'
Making all in FastScan
make[8]: Wejście do katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib/python/Plugins/SystemPlugins/FastScan'
make[8]: Nie ma nic do zrobienia w `all'.
make[8]: Opuszczenie katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib/python/Plugins/SystemPlugins/FastScan'
Making all in OSDPositionSetup
make[8]: Wejście do katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib/python/Plugins/SystemPlugins/OSDPositionSetup'
make[8]: Nie ma nic do zrobienia w `all'.
make[8]: Opuszczenie katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib/python/Plugins/SystemPlugins/OSDPositionSetup'
Making all in OSD3DSetup
make[8]: Wejście do katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib/python/Plugins/SystemPlugins/OSD3DSetup'
make[8]: Nie ma nic do zrobienia w `all'.
make[8]: Opuszczenie katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib/python/Plugins/SystemPlugins/OSD3DSetup'
Making all in HdmiCEC
make[8]: Wejście do katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib/python/Plugins/SystemPlugins/HdmiCEC'
make[8]: Nie ma nic do zrobienia w `all'.
make[8]: Opuszczenie katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib/python/Plugins/SystemPlugins/HdmiCEC'
Making all in VideoClippingSetup
make[8]: Wejście do katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib/python/Plugins/SystemPlugins/VideoClippingSetup'
make[8]: Nie ma nic do zrobienia w `all'.
make[8]: Opuszczenie katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib/python/Plugins/SystemPlugins/VideoClippingSetup'
Making all in VideoEnhancement
make[8]: Wejście do katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib/python/Plugins/SystemPlugins/VideoEnhancement'
Making all in meta
make[9]: Wejście do katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib/python/Plugins/SystemPlugins/VideoEnhancement/meta'
make[9]: Nie ma nic do zrobienia w `all'.
make[9]: Opuszczenie katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib/python/Plugins/SystemPlugins/VideoEnhancement/meta'
make[9]: Wejście do katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib/python/Plugins/SystemPlugins/VideoEnhancement'
make[9]: Nie ma nic do zrobienia w `all-am'.
make[9]: Opuszczenie katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib/python/Plugins/SystemPlugins/VideoEnhancement'
make[8]: Opuszczenie katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib/python/Plugins/SystemPlugins/VideoEnhancement'
Making all in WirelessLan
make[8]: Wejście do katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib/python/Plugins/SystemPlugins/WirelessLan'
Making all in meta
make[9]: Wejście do katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib/python/Plugins/SystemPlugins/WirelessLan/meta'
make[9]: Nie ma nic do zrobienia w `all'.
make[9]: Opuszczenie katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib/python/Plugins/SystemPlugins/WirelessLan/meta'
make[9]: Wejście do katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib/python/Plugins/SystemPlugins/WirelessLan'
make[9]: Nie ma nic do zrobienia w `all-am'.
make[9]: Opuszczenie katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib/python/Plugins/SystemPlugins/WirelessLan'
make[8]: Opuszczenie katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib/python/Plugins/SystemPlugins/WirelessLan'
Making all in NetworkWizard
make[8]: Wejście do katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib/python/Plugins/SystemPlugins/NetworkWizard'
Making all in meta
make[9]: Wejście do katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib/python/Plugins/SystemPlugins/NetworkWizard/meta'
make[9]: Nie ma nic do zrobienia w `all'.
make[9]: Opuszczenie katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib/python/Plugins/SystemPlugins/NetworkWizard/meta'
make[9]: Wejście do katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib/python/Plugins/SystemPlugins/NetworkWizard'
make[9]: Nie ma nic do zrobienia w `all-am'.
make[9]: Opuszczenie katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib/python/Plugins/SystemPlugins/NetworkWizard'
make[8]: Opuszczenie katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib/python/Plugins/SystemPlugins/NetworkWizard'
Making all in VFD-Icons
make[8]: Wejście do katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib/python/Plugins/SystemPlugins/VFD-Icons'
Making all in meta
make[9]: Wejście do katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib/python/Plugins/SystemPlugins/VFD-Icons/meta'
make[9]: Nie ma nic do zrobienia w `all'.
make[9]: Opuszczenie katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib/python/Plugins/SystemPlugins/VFD-Icons/meta'
make[9]: Wejście do katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib/python/Plugins/SystemPlugins/VFD-Icons'
make[9]: Nie ma nic do zrobienia w `all-am'.
make[9]: Opuszczenie katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib/python/Plugins/SystemPlugins/VFD-Icons'
make[8]: Opuszczenie katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib/python/Plugins/SystemPlugins/VFD-Icons'
make[8]: Wejście do katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib/python/Plugins/SystemPlugins'
make[8]: Nie ma nic do zrobienia w `all-am'.
make[8]: Opuszczenie katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib/python/Plugins/SystemPlugins'
make[7]: Opuszczenie katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib/python/Plugins/SystemPlugins'
Making all in PLi
make[7]: Wejście do katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib/python/Plugins/PLi'
make[7]: Nie ma nic do zrobienia w `all'.
make[7]: Opuszczenie katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib/python/Plugins/PLi'
make[7]: Wejście do katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib/python/Plugins'
make[7]: Nie ma nic do zrobienia w `all-am'.
make[7]: Opuszczenie katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib/python/Plugins'
make[6]: Opuszczenie katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib/python/Plugins'
make[6]: Wejście do katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib/python'
make[6]: Nie ma nic do zrobienia w `all-am'.
make[6]: Opuszczenie katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib/python'
make[5]: Opuszczenie katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib/python'
make[5]: Wejście do katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib'
CXX gdi/picload.o
gdi/picload.cpp:7:57: fatal error: ../../../misc/tools/libmmeimage/libmmeimage.h: Nie ma takiego pliku ani katalogu
compilation terminated.
make[5]: *** [gdi/picload.o] Błąd 1
make[5]: Opuszczenie katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib'
make[4]: *** [all-recursive] Błąd 1
make[4]: Opuszczenie katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib'
make[3]: *** [all] Błąd 2
make[3]: Opuszczenie katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly/lib'
make[2]: *** [all-recursive] Błąd 1
make[2]: Opuszczenie katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly'
make[1]: *** [all] Błąd 2
make[1]: Opuszczenie katalogu `/home/tas/tdt-amiko/tdt/tufsbox/work/enigma2-pli-nightly'
make: *** [.deps/enigma2-pli-nightly.do_compile] Błąd 2
tas@tas-Lenovo-G500:~/tdt-amiko/tdt/cvs/cdk$

zdzislaw22
05.05.2014, 22:19
Error message is quite clear "No such file or folder"
Check if it exists,if no, your repository i broken, if yes, check access rights.

p.s. Better is to provide logs in English than in Polish. ;)

kader_73
08.05.2014, 16:53
hello ;

i'm trying to build Enigma2 from audionieks-max-tdt git and i got this error :


================================================== ================================================== ====
Calling options : --enable-hs7119 --enable-libeplayer3 --enable-mediafwgstreamer
Boxtype : hs7119
Media Framework : gstreamer
External LCD : no
Revision : 20a5a1f00cdadeff6d0e02861cf7ba8436fc49c5

error: Your local changes to the following files would be overwritten by checkout:
data/encoding.conf
data/skin_default/icons/Makefile.am
lib/dvb/pmt.cpp
lib/python/Plugins/Plugin.py
lib/python/Tools/Directories.py
po/xml2po.py
tools/enigma2.sh.in
Please, commit your changes or stash them before you can switch branches.
Aborting
patching file configure.ac
Hunk #1 succeeded at 34 (offset 1 line).
Hunk #2 succeeded at 198 (offset 4 lines).
Hunk #3 succeeded at 291 with fuzz 1 (offset 4 lines).
can't find file to patch at input line 210
Perhaps you used the wrong -p or --strip option?
The text leading up to this was:
--------------------------
|diff -Naur '--exclude-from=diff-exclude' enigma2-nightly.org/data/skin_display.xml enigma2-nightly/data/skin_display.xml
|--- enigma2-nightly.org/data/skin_display.xml 2013-05-01 12:15:11.165892618 +0200
|+++ enigma2-nightly/data/skin_display.xml 2013-05-11 19:07:01.908432459 +0200
--------------------------
File to patch:


when i enter :
git checkpout
git pull

the answer is already up to date .

when i search for the "skin_display.xml" there is no file found in whole build directory.

any help please ??

Audioniek
09.05.2014, 03:51
You problably used diff0; PLi has changed the name of this file to skin_display_default.xml. My git is not up to date at the moment; diff0 will fail. Try diff5.

I am busy on the hs7119 as well, can you inform me if the remote and the display are working? On my builds they do not...

Regards,

Audioniek.

bonkel
09.05.2014, 03:55
you need patched frontpanel driver, for that device......

Audioniek
09.05.2014, 08:37
Yes, I had drawn that conclusion myself. The problem is, what has changed in nuvoton, as the very similar HS7810a, HS7110 and HS7819 do work. Fortis has solved something differently on the HS7119, but I do not know what (probably I/O address or/and IRQ number). Can you shed some light on this?

Regards,

Audioniek.

kader_73
09.05.2014, 13:41
You problably used diff0; PLi has changed the name of this file to skin_display_default.xml. My git is not up to date at the moment; diff0 will fail. Try diff5........

hello ,

If you mean by diff5 the revision 5 , it's already chosen automatically


5) Fri, 10 May 2013 15:43 - E2 OpenPli gstreamer / libplayer3 20a5a1f00cdadeff6d0e02861cf7ba8436fc49c5
================================================== ================================================== ====
Calling options : --enable-hs7119 --enable-libeplayer3 --enable-mediafwgstreamer
Boxtype : hs7119
Media Framework : gstreamer
External LCD : no
Revision : 20a5a1f00cdadeff6d0e02861cf7ba8436fc49c5


I am busy on the hs7119 as well, can you inform me if the remote and the display are working? On my builds they do not...

the box is 7819 and not 7119, as you know during the selction of the receiver it's 31 for both,

Regards

kader_73
10.05.2014, 21:01
It doesn't matter, hoping that your occupation deserves your obstention, we are all in favor of a final version for Enigma sh4 flash version, which we will volunteer to participate .

Regards

samkooke
10.05.2014, 22:08
hello ok I am volotaire to test my recever is 7119

kader_73
28.05.2014, 11:14
Hello ;
after the last code update in audionieks-max-git i get the folowing error :

Generating configuration files for tufsbox-cdk, please wait....
configure.ac:4: installing `./config.guess'
configure.ac:4: installing `./config.sub'
configure.ac:23: installing `./install-sh'
configure.ac:23: installing `./missing'
automake: cannot open < make/busybox-initramfs.mk: Aucun fichier ou dossier de ce type
autoreconf: automake failed with exit status: 1


there is no busybox-initramfs.mk file in make folder .

Edit : missing files already add , thanks audioniek ; build in progress !!

regards

kader_73
29.05.2014, 12:32
hello ,

After building E2 image and following the steps in the README.USB for creating an usb image , runing the usb script doesn't work and thre is no out folder , two dummy files created in the hs7x1x folder "box_ok" and "USB_build_completed " , output after ./hs7x1x_USB.sh

root@debian-kader:/home/kader/E2_Amaster/tdt/flash/hs7x1x# ./hs7x1x_USB.sh

-----------------------------------------------------------------------
This script creates USB bootable images for Fortis receivers HS7110,
HS7119, HS7810(A) and HS7819 with loader X.X6 or X.X7
Author: Schischu, Audioniek
Date: 05-01-2012 - 05-12-2014
-----------------------------------------------------------------------
root@debian-kader:/home/kader/E2_Amaster/tdt/flash/hs7x1x#


regards

santa
29.05.2014, 12:40
This function is not ready yet, this is only First impressions

Audioniek
29.05.2014, 16:34
@kader_73: Hello,

I have checked, but the current script file hs7x1x_USB.sh does not make the out directory automatically, which is an oversight on my side. Either create it by hand for the moment, or do a git pull after I have pushed an improved version. Hope to do the latter this evening, as I have found some other problems while building for a spark Building for a HS7819 should be OK, apart from this problem.

Regards,

Audioniek.

kader_73
01.06.2014, 14:59
@Audioniek , Hello

The USB imge built and works fine (audio and video ) on the hs7819 , but the colored buttons ( RGYB) don't work in the RC , so there is no audio select for example , we can see the ligthning on the front of the box but nothing displayed .

Edit : Sorry but i have to correct myself, the colorful Buttons work in other menu such as channels selection, plugin or confirm - cancel an action, but not when they are used directly, more precisely the yellow and red ; the two others state that they aren't used


Reagrds

Audioniek
02.06.2014, 02:58
@kader_73

Hi

It is a bit late, but I will have a look tomorrow. Congratulations on the successful build.

Regards,

Audioniek.

Audioniek
02.06.2014, 14:02
@kader_73

I had a quick look in the keymap. The red button has not been allocated during normal TV watching. This has been done on purpose, as it mostly used to activate HbbTV, which I have not tested yet (I do not even know if it exists for SH4 receivers).

The current keymap was designed to mimic the original remote control keys as close as possible when compared to the original Fortis firmware. In those firmwares Red is only used to set a bookmark during play of a recording (not impemented yet in this keymap, I will have a look if it possible to do something similar) and Green jumps to the next bookmark already set (not implemented yet either).

Yellow should work during normal TV watching to select the audio channel. I will check this later on and get back to you.

That leaves Blue. In Fortis firmwares this activates the mosaic display, a feature Enigma2 has not got. So I left that key unallocated as well.

One thing you may not have noticed: FAV (short) displays the bouquet list as you would expect; FAV (long) displays the satellite list.

The tick key (the one with the italic V, not used with Fortis firmwares) displays the help.

Regards,

Audioniek.

kader_73
02.06.2014, 16:04
Hello Audioniek ,

Thanks for this job and all the explanations ;
I confirm that the audio select doesn't work and you imagine how importante it is .
one more thing , concerning the pti driver , how to get one with software supporting scrambled channels ? i tried some from other images with same kernel but unfortunatly don't work , there is no tuner detection , so can you help for that ? or just to point me somewhere .

Regards

kader_73
02.06.2014, 18:34
hello again ,

the pti file found and works well , i'll tray the image for few days and attemp to flash it on board .
thanks once again Audioniek.

Regards

samkooke
02.06.2014, 20:56
hello kader I'm here to test 7119

Audioniek
02.06.2014, 23:38
one more thing , concerning the pti driver , how to get one with software supporting scrambled channels ?

Hello kader_73,

A pti-file that can descramble locked channels is not available publicly, and therefore I do not have one, nor can I build it, as this would violate somebody's rights. The image you can build from the various git's (including mine) can only be used to watch FTA channels.

Meanwhile I have had a closer look at the audio-select on yellow while watching TV. This was relatively easy: I already had built it in but made a mistake. The yellow key was assigned twice (to audio select and subchannel select) and subchannel select takes precedence. You can fix this yourself by editing the keymap.xml like this:

Locate the following lines in the file keymap.xml:

<map context="InfobarSubserviceSelectionActions">
<key id="KEY_YELLOW" mapto="subserviceSelection" flags="m" />
</map>

Change this to:

<map context="InfobarSubserviceSelectionActions">
<key id="KEY_BLUE" mapto="subserviceSelection" flags="m" />
</map>

This will move the assigment for subservice select to the blue key which was not assigned yet. Pressing yellow while watching TV should now work as intended.

The file keymap.xml is located in the folder /usr/local/share/enigma2 on your receiver. To change it in your build environment, the file name is keymap_fortis.xml and it is located in X/tdt/cvs/cdk/root/usr/local/share/enigma2. I will put this change on my git when I do the next push (currently working on aotom for sparks).

In my previous post I said something that was not correct: pressing red and green in the movie player does work as explained: red toggles a bookmark, green jumps to the next bookmark. It was already in the keymap!


i'll tray the image for few days and attemp to flash it on board

Please be aware that flashing the image is completely untested at the moment. The file hs7x1x_flash.sh and the sctripts it calls is very experimental and just a beginning. At the moment I have not been able to generate a kernel that starts in flash. It probably has something to do with the setup patch file for the kernel. It can be done though; when I flashed a kernel from an HDMU image it started. This kernel tries to locate root.img on a USB stick however and cannot and will not start a rootfs in flash. Hope to hear your input on this.

Regards,

Audioniek.

- - - Aktualisiert - - -

@samkooke

Hello,

The HS7119 image can be built and has problable the same requirements as the flashable one for a HS7819. As can be read a few posts back, the image builds OK and starts, but the remote control and display do not work, as the novutondriver uses the wrong settings. bonkel has written you need a a changed novoton for this. Testing flash ablityand start of image is possible though: on USB I get as far as the first run assitant asking for the video output but cannot control the receiver. Hope to find a solution soon, for both the non-starting flash kernel and the nuvoton problem.

Regards,

Audioniek.

kader_73
03.06.2014, 00:13
Hello ,

The audio-select fixed by modifaying the keymap as you said . about the pti file that I tested , it made some muting bug from time to time, I will try to further research on my side. Thank you for advices about the flash version I will be more patient in this case pending for expected news.
thank you for your efforts and good luck

Regards

kader_73
14.02.2015, 16:50
Hello

I'm looking for this file , ipkg-utils-050831.tar.gz , if someone can provide it to me , i can't get it on handhelds ftp.


Regards

joeuser
14.02.2015, 22:16
ftp://ftp.gwdg.de/pub/linux/handhelds/packages/ipkg-utils/ipkg-utils-050831.tar.gz

kader_73
15.02.2015, 01:50
ftp://ftp.gwdg.de/pub/linux/handhelds/packages/ipkg-utils/ipkg-utils-050831.tar.gz
no way to get it on line that's why i'm asking for it here.

joeuser
15.02.2015, 02:10
I just checked the link and it works fine for me. But I have attached it for you...

kader_73
15.02.2015, 13:53
yes ; i guess the probleme is from my side .

thanks a lot .

Regards

pop1234
18.09.2015, 12:48
hi

i use ubuntu 14.04 32bit

error




RPM build errors:
bogus date in %changelog: Mon Jul 11 2014 Laurent Alfonsi <laurent.alfonsi@st.com> 75
bogus date in %changelog: Mon Jul 11 2014 Christian Bruel <christian.bruel@st.com> 74
Bad exit status from /var/tmp/rpm-tmp.659fK8 (%install)
make: *** [RPMS/i686/stlinux24-cross-sh4-binutils-2.24.51.0.3-76.i686.rpm] Error 1
pop@ubuntu:~/Desktop/max-tdt/tdt/cvs/cdk$

max
18.09.2015, 12:54
falsches git (old open-duckbox-project-sh4)

neues git
https://github.com/Duckbox-Developers/StartHere

pop1234
18.09.2015, 14:26
thx max

ghani
07.04.2016, 19:10
GElöst

ghani
09.04.2016, 22:51
Gelöst

santa
10.04.2016, 03:52
Kann zwar zu dem Fehler nix sagen, scheinbar passt der Patch nicht, aber /root/Archive... klingt für mich als wenn du als root baust, sollte man nicht machen.

Gesendet von meinem Nexus 7 mit Tapatalk

ghani
10.04.2016, 05:12
ich baue immer als root und hatte kein problem, und auch als user hatte ich diese fehler letzte woch woche wo ich noch als user gebaut habe!

Macbest
10.04.2016, 14:29
Wenn man mal als User mal als root baut bekommst irgendwann Automatisch Fehler.
Am besten mal alles neu machen.

ghani
10.04.2016, 16:59
gelöst