PDA

Archiv verlassen und diese Seite im Standarddesign anzeigen : ipbox 9000 dvb-t problem



linch
14.01.2013, 12:06
Hello to all people i build from your duckbox sources (max10) an image for my ipbox 9000 with dvb-s and dvb-t tuner build is all fine so for zl10353.ko module the problem is the final release where the dvb-t tuner is not present. From lsmod command i see module regularly loaded at boot but it not use dvb-pll.ko and socket.ko the problem could be there ?? ..........any suggestion is appreciated.
Many thanks for your great community work.

Grabber66
14.01.2013, 13:39
Maybe you test the driver out of the HDMU Image. If you compile from git, there are not all drivers compiled.
I know that the dvb-c driver is not included. For DVB-T i don't know.

linch
14.01.2013, 13:48
Maybe you test the driver out of the HDMU Image. If you compile from git, there are not all drivers compiled.
I know that the dvb-c driver is not included. For DVB-T i don't know.

Thanks for your replay...... from git dvb-t (zl10353) and dvb-c driver (tda10023) are included into the kernel source you must only activate them first of build image recompiling kernel source or modules only. Problem for me ...i have driver but tuner is not present on enigma2.
Regards.

Grabber66
14.01.2013, 21:30
I think this is a Problem of a file called "makedev" but i don't know what you habe to change. - sry
I had this Problem, as i installed a "wrong" image. I've installed an IPBox910 image on my IPBox9000 and then
i have only one tuner for use. This mistake costs me one day to find out :(

linch
14.01.2013, 22:08
I think this is a Problem of a file called "makedev" but i don't know what you habe to change. - sry
I had this Problem, as i installed a "wrong" image. I've installed an IPBox910 image on my IPBox9000 and then
i have only one tuner for use. This mistake costs me one day to find out :(


|__ __| | __ \ | | | | | |
| | ___ __ _ _ __ ___ | | | |_ _ ____| | __| |_ __ _| | ___ ___
| |/ _ \/ _` | '_ ` _ \ | | | | | | |/ __| |/ /| __|/ _` | |/ _ | __|
| | __/ (_| | | | | | | | |__| | |_| | (__| < | |_| (_| | | __|__ \
|_|\___|\__,_|_| |_| |_| |_____/ \__,_|\____|_|\_\ \__|\__,_|_|\___|___/




Targets:
1) Kathrein UFS-910
3) Kathrein UFS-912
4) Kathrein UFS-922
5) Topfield 7700 HDPVR
6) Fortis based (HDBOX)
7) SpiderBox HL-101
8) Edision Argus vip
9) Cuberevo (IPBOX 9000)
10) Cuberevo mini (IPBOX 900)
11) Cuberevo mini2 (IPBOX 910)
12) Cuberevo 250 (IPBOX 91)
13) Cuberevo 9500HD (7000HD)
14) Cuberevo 2000HD
15) Cuberevo mini_fta (200HD)
16) Homecast 5101
17) Octagon 1008
18) SPARK
19) Atevio7500
20) SPARK7162
21) IPBOX9900
22) IPBOX99
23) IPBOX55
24) Fortis HS7810A
25) B4Team ADB 5800S
26) Fortis HS7110
27) WHITEBOX
28) Kathrein UFS-913
Select target (1-28)?

i'm working with number (9) target i think it's right .......for makedev i don't see strange thinks only the calls to 2 (cuberevo etc.) or 3 tuners (spark7162) so i try change somethink on rcs file with no luck.
Thanks and regards.

Grabber66
15.01.2013, 09:12
You build in the right way, but i am sorry to tell you, that i have no idea, why your dvb-t tuner doesn't initialised.

linch
15.01.2013, 13:33
many thanks grabber66 i solved .......the problem was that after i had rebuild new kernel i had installed even old with new uImage all working fine.
Regards