HDMU 1625 enigma2 Git 5256

[giopet]

"AW: ACHTUNG! Neuerungen am HDMU Image



Für alle boxen wurde testweise mal ein gst image gebaut.
Bitte mal testen ob Unterschiede spürbar sind.
Ausserdem bei den sparks, ufs913, ipboxen und Topf mal auf die Lautstärke achten.

Der hdmu skin wurde in der channellist noch mal verändert um etwas mehr speed herauszuholen. "


Hi,
hatte Heute mal das letzte Image von euch getestet,leider passt bei der IPBox910 einiges nicht.Ich fange mal mit den kleinen Sachen an.
1.Viele Plugins die geladen wurden,zeigten Fehler an beim installieren,funktionierten aber.
2.Wenn ich zb mgcamd startete, wurde es nicht angezeigt,das gleiche beim autostart.Beide wurden immer mit Nein angezeigt,obwohl sie aktiv waren.
3.Habe wie immer den PLi HD Skin installiert,wollte es dann starten,doch dann Dauerreboot,es war mir noch nicht mal möglich den Skin per ftp zu löschen.

Weiss nicht,ob es nur bei mir der Fall ist,aber wäre nicht schlecht,wenn es jemand nachstellt.Werde es aber nochmal selbst testen.

[giopet]

Ok,Kommando zurück!!!
Habe jetzt alles neu aufgespielt und Komischerweise läuft wieder alles normal.Skin geht und emu Start wird auch angezeigt.Einziges was ich nicht gemacht habe,hatte keine alte Einstellungen am Anfang beim Startassistenten übernommen.Kann mir aber auch nicht vorstellen,das es daran lag.

[santa]

Durchaus, Einstellungen übernehmen bringt immer wieder komische Fehler.

Deswegen immer mit cleaner installation gegentesten.

[giopet]

War das Erste mal überhaupt,das ich es mit Einstellungen übernehmen gemacht hatte,habe jetzt im Nachhinein wieder die Einstellungen eingespielt,doch geht trotzdem alles ohne Probs.

[giopet]

Sorry,aber wieder ist es passiert,nichts geht mehr.hier mal der log:


U-Boot 1.3.1 (Aug 10 2010 - 15:48:57) - stm23-2008-03-19
Board: cuberevo-mini II (0x2D42C041)
Board: 14 dotmatrix vfd front
DRAM: 128 MB
Flash: 32 MB
In: serial
Out: serial
Err: serial
Reserve 0x2010000 bytes from 0xa5ff0000 for DGS upgrade buffer.
no such a key.(ethaddr)
booting...
(Re)start USB...
USB: scanning bus for devices... 2 USB Device(s) found
scanning bus for storage devices... 1 Storage Device(s) found



U-Boot 1.3.1 (Aug 10 2010 - 15:48:57) - stm23-2008-03-19
Board: cuberevo-mini II (0x2D42C041)
Board: 14 dotmatrix vfd front
DRAM: 128 MB
Flash: 32 MB
In: serial
Out: serial
Err: serial
Reserve 0x2010000 bytes from 0xa5ff0000 for DGS upgrade buffer.
no such a key.(ethaddr)
Saving Environment to Flash...
Un-Protected 1 sectors
Erasing Flash...
.
Erased 1 sectors
Writing to Flash... done
Protected 1 sectors
(Re)start USB...
USB: scanning bus for devices... 2 USB Device(s) found
scanning bus for storage devices... 1 Storage Device(s) found

1719491 bytes read
## Booting image at a5ff0000 ...
Image Name: Linux-2.6.32.59_stm24_0211
Image Type: SuperH Linux Kernel Image (gzip compressed)
Data Size: 1719427 Bytes = 1.6 MB
Load Address: 84001000
Entry Point: 84002000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK

Warning: Unable to determine if kernel is built for 29- or 32-bit mode!

Starting kernel console=ttyAS1,115200 panic=3 root=/dev/sdb3 rw rootdelay=10 init=/bin/devinit ip=192.168.1.3:192.168.1.254:192.168.1.254:255.255 .255.0 mem=128m coprocessor_mem=4m@0x10000000,4m@0x10400000 - 0x00000000 - 0 ...

INIT: version 2.86 booting
init frontpanel
Mount /dev in tmpfs
Copying device nodes to /dev
Starting portmap daemon....
Hostname: IPBOX910.
init stmfb
offset key len data
found key tvmode ->value 0
SD-PAL
LOADING MODULES
load firmware
copLoadFile (file /boot/audio.elf)
ustslave: Kernel Version: 24
base_address 0x10400000
seeking to 0
seeking to 5f00
seeking to 12320
seeking to 1aa20
seeking to 173100
seeking to 173138
seeking to 173170
seeking to 1b9058
seeking to 1b9060
seeking to 1b9068
seeking to 1b9070
seeking to 1d0920
seeking to 1d0a00
copLoadFile (file /boot/video.elf)
ustslave: Kernel Version: 24
base_address 0x10000000
seeking to 0
seeking to 4e020
seeking to f8378
seeking to f83b0
seeking to f83e8
seeking to 10ce98
seeking to 10cea4
seeking to 10ceb0
seeking to 12ed90
seeking to 12cd74
seeking to 12ee00
init embx
init AVS
skip insmod tuner
Loading autofs
Model: cuberevo-mini2
vBoxType: 11
Input device name: "TDT RC event driver"
Selected Remote: Cuberevo RemoteControl
RemoteControl Map:
KEY_F1 - 00 - 59
KEY_F2 - 01 - 60
KEY_F3 - 02 - 61
INFO - 03 - 358
RADIO - 04 - 385
PREVIOUS - 05 - 412
EPG - 06 - 365
RECORD - 07 - 167
FAVORITES - 08 - 364
MEDIA - 09 - 226
STANDBY - 0A - 116
KEY_F5 - 0B - 63
MUTE - 0C - 113
ARCHIVE - 0D - 361
0BUTTON - 10 - 11
1BUTTON - 11 - 2
2BUTTON - 12 - 3
3BUTTON - 13 - 4
4BUTTON - 14 - 5
5BUTTON - 15 - 6
6BUTTON - 16 - 7
7BUTTON - 17 - 8
8BUTTON - 18 - 9
9BUTTON - 19 - 10
UP - 1A - 103
DOWN - 1B - 108
RIGHT - 1C - 106
LEFT - 1D - 105
REWIND - 1E - 168
OK - 1F - 352
PLAY - 20 - 207
FASTFORWARD - 21 - 208
STOP - 22 - 128
SLOW - 23 - 409
AGAIN - 24 - 129
PAUSE - 25 - 119
MENU - 26 - 139
EXIT - 27 - 102
KEY_F7 - 28 - 65
KEY_BOOMARKS - 29 - 156
RED - 2A - 398
BLUE - 2B - 401
KEY_F8 - 2C - 66
GREEN - 2D - 399
YELLOW - 2E - 400
AUDIO - 2F - 392
SUBTITLE - 30 - 370
TEXT - 31 - 388
CHANNELUP - 32 - 402
CHANNELDOWN - 33 - 403
VOLUMEUP - 34 - 115
VOLUMEDOWN - 35 - 114
WWW - 36 - 150
Supports Long KeyPress: 1
processComplex >
period 10, delay 140
micom version = 2
Using period=10 delay=140
[SEM] DOWN
showSinglePic /boot/bootlogo.mvi
VIDEO_SELECT_SOURCE MEMORY (Success)
VIDEO_PLAY (Success)
VIDEO_CONTINUE: (Success)
VIDEO_CLEAR_BUFFER: (Invalid argument)
Starting autofs
Mounting local filesystems...
Cleaning /tmp.
starting telnetd
Starting FTP server: vsftpd.
swapon: can't stat 'swapfile1': No such file or directory
tuxbox mgcamd v1.35 by mixvt (compiled Jan 20 2010 22:15:45)
[mg] Net:32:7:2:5s Show ecm:1, emm:0 Up:1 Au:1 Dir:0 Osd:neutrino:8080:3 Cache:7 Log:2:127.0.0.1:28007 Reread:0
[mg] Ecm cache time: 15
Box type: dbox2
Conax.Key error 2: No such file or directory
SoftCam.Key error 2: No such file or directory
AutoRoll.Key error 2: No such file or directory
Conax.Key error 2: No such file or directory
CCcamd route: host 172.16.1.1 port 12000 user1:pass1
[mgcam] emm thread started
[cccamd] My nodeID 8bf2af7d3c2c271d
[cccamd] =============== Connecting to 172.16.1.1:12000... ===============
[cccamd] Can't open host 172.16.1.1:12000
Simple mixer control 'Analog',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback -31 - 31
Mono: Playback 15 [74%] [on]
Deconfiguring network interfaces... Simple mixer control 'SPDIF',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback -31 - 31
Mono: Playback 19 [81%] [on]
Simple mixer control 'HDMI',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback -31 - 31
Mono: Playback 15 [74%] [on]
LOADING E2
starting e2->
done.
Setting up IP spoofing protection: rp_filter.
Configuring network interfaces... done.
/usr/local/bin/enigma2: symbol lookup error: /usr/lib/libgstreamer-0.10.so.0: undefined symbol: g_error_get_type
e2 ended <- RTV: 127
*
ERROR
starting e2->
INIT: Switching to runlevel: 6
INIT: Sending processes the TERM signal
[mgcamd] signal 15 received
dumping cache
closing routes
unlinking files
Sending all processes the TERM signal...done.
Sending all processes the KILL signal...done.
Deactivating swap...umount: tmpfs busy - remounted read-only
swapoff: can't stat 'LABEL=SWAPPART': No such file or directory
done.
Unmounting local filesystems...umount: tmpfs busy - remounted read-only
done.
Rebooting... /bin/fp_control: SW Version 1.03
Model: cuberevo-mini2
vBoxType: 11
Selected Model: CUBEREVO frontpanel control utility
init
checkConfig
configs: DISPLAY = 1, DISPLAYCUSTOM = 1, CUSTOM = %H:%M:%S
, WAKEUPDECREMENT 300

[giopet]

Hier noch ein Problemkind aus dem SIF Forum:

"Ich installierte schon verschiedene Versionen von USB Images, die es für die IPBOX 910 gibt, aber ich hatte schon immer Stabilität Probleme ".

Gestern habe ich die neueste HDMU Version installiert und heute habe ich einige Tests gemacht. Ich installierte crossepg, dass mir Probleme machte nach dem ersten Start Versuch,es gab einen GS.


Wie kann man es lösen?

Vielen Dank für die geleistete Arbeit.
Das Image mag Ich .


Der letzte Teil zeigt:


Traceback (most recent call last): File "/home/eddy/ipk/IPKBUILDSOURCE/epg_crossepg/usr/lib/enigma2/python/Plugins/SystemPlugins/CrossEPG/crossepg_auto.py", line 96, in poll AttributeError: 'NoneType' object has no attribute 'nav' (PyObject_CallObject(<bound method CrossEPG_Auto.poll of <class 'Plugins.SystemPlugins.CrossEPG.crossepg_auto.Cros sEPG_Auto'>>,()) failed) getResolvedKey config.plugins.crashlogautosubmit.sendAnonCrashlog failed !! (Typo??) getResolvedKey config.plugins.crashlogautosubmit.addNetwork failed !! (Typo??) getResolvedKey config.plugins.crashlogautosubmit.addWlan failed !! (Typo??)

[Berg666]

Bei diese version auch BUG bei FEC 3/5 an allen Sender an DigitAlb fuer IpBox mit Conax Tuner. Ueberhaupt kein signal und findet keine Programe. Andere FEC funktioniren.

[giopet]

Hi,
Heute mal das aktuelle Image eingespielt und wieder ging es in die Hose,das ist jetzt mit beiden gst Images der Fall gewesen,mit den ffm Images keine Probleme.
Hier noch einmal der Log vom Heutigen Crash(nicht den ganzen Log,passt nicht weil zu lang):




[output/linuxdvb.c:LinuxDvbFlush] exiting
[output/linuxdvb.c:reset] unknown video codec
[output/linuxdvb.c:LinuxDvbPts] ioctl failed with errno 22
[output/linuxdvb.c:LinuxDvbPts] VIDEO_GET_PTS: Invalid argument
[playback/playback.c:SupervisorThread] playbackPts 0 ->lastPts 454204 ret -1
c: Continue
p: Pause
f: Increase speed (Fast forward) (stepwise)
b: Decrease speed (Fast reverse) (stepwise)
l: Print duration
j: Print current PTS
k[1,4,7]: Jump back [15,60,300] seconds
k[3,6,9]: Jump forward [15,60,300] seconds
i: Print Info
Control:
al: List audio tracks
ac: List current audio track
a[id] Select audio track
sl: List subtitles
sc: List current subtitle
s[id] Select subtitles
q: Stop
c: Continue
p: Pause
f: Increase speed (Fast forward) (stepwise)
b: Decrease speed (Fast reverse) (stepwise)
l: Print duration
j: Print current PTS
k[1,4,7]: Jump back [15,60,300] seconds
k[3,6,9]: Jump forward [15,60,300] seconds
i: Print Info
Control:
al: List audio tracks
ac: List current audio track
a[id] Select audio track
sl: List subtitles
sc: List current subtitle
s[id] Select subtitles
q: Stop
c: Continue
p: Pause
f: Increase speed (Fast forward) (stepwise)
b: Decrease speed (Fast reverse) (stepwise)
l: Print duration
j: Print current PTS
k[1,4,7]: Jump back [15,60,300] seconds
k[3,6,9]: Jump forward [15,60,300] seconds
i: Print Info
Control:
al: List audio tracks
ac: List current audio track
a[id] Select audio track
sl: List subtitles
sc: List current subtitle
s[id] Select subtitles
q: Stop
c: Continue
p: Pause
f: Increase speed (Fast forward) (stepwise)
swapon: can't stat 'swapfile1': No such file or directory
[playback/playback.c:SupervisorThread] <
[output/linuxdvb.c:LinuxDvbFlush] v1 a0
[output/linuxdvb.c:LinuxDvbFlush] ioctl failed with errno 22
[output/linuxdvb.c:LinuxDvbFlush] VIDEO_FLUSH: Invalid argument
[output/linuxdvb.c:LinuxDvbFlush] exiting
[output/linuxdvb.c:reset] unknown video codec
[container/container_ffmpeg.c:container_ffmpeg_stop]
[container/container_ffmpeg.c:container_ffmpeg_stop] ret 0
b: Decrease speed (Fast reverse) (stepwise)
l: Print duration
j: Print current PTS
k[1,4,7]: Jump back [15,60,300] seconds
k[3,6,9]: Jump forward [15,60,300] seconds
i: Print Info
Control:
al: List audio tracks
ac: List current audio track
a[id] Select audio track
sl: List subtitles
sc: List current subtitle
s[id] Select subtitles
q: Stop
c: Continue
p: Pause
f: Increase speed (Fast forward) (stepwise)
b: Decrease speed (Fast reverse) (stepwise)
l: Print duration
j: Print current PTS
k[1,4,7]: Jump b
Simple mixer control 'Analog',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback -31 - 31
Mono: Playback 15 [74%] [on]
Deconfiguring network interfaces... Simple mixer control 'SPDIF',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback -31 - 31
Mono: Playback 15 [74%] [on]
Simple mixer control 'HDMI',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback -31 - 31
Mono: Playback 15 [74%] [on]
LOADING E2
starting e2->
done.
Setting up IP spoofing protection: rp_filter.
Configuring network interfaces... done.
/usr/local/bin/enigma2: symbol lookup error: /usr/lib/libgstreamer-0.10.so.0: undefined symbol: g_error_get_type
e2 ended <- RTV: 127
*
ERROR
starting e2->
INIT: Switching to runlevel: 6
INIT: Sending processes the TERM signal
[mgcamd] signal 15 received
dumping cache
closing routes
unlinking files
Sending all processes the TERM signal...done.
Sending all processes the KILL signal...done.
Deactivating swap...umount: tmpfs busy - remounted read-only
swapoff: can't stat 'LABEL=SWAPPART': No such file or directory
done.
Unmounting local filesystems...umount: tmpfs busy - remounted read-only
done.
Rebooting... /bin/fp_control: SW Version 1.03
Model: cuberevo-mini2
vBoxType: 11
Selected Model: CUBEREVO frontpanel control utility
init
checkConfig
configs: DISPLAY = 1, DISPLAYCUSTOM = 1, CUSTOM = %H:%M:%S
, WAKEUPDECREMENT 300
getTimeFromArg
getTimeFromArg <

[giopet]

Ok,
alles wieder neu geflasht,nichts drauf gemacht ausser die mgcamd,alles läuft.Hatte von einem User hier on Board gelesen,das es am SHOUTcast Plugin liegen könnte,Plugin drauf gemacht und wieder Dauerreboot.Kann das bitte jemand testen(nachvollziehen)?Mit dem ffm Images läuft das Plugin normal und auch das Image macht keine Probleme,nur mit dem gst Image passt da was nicht und zerschiesst das Image.

[Macbest]

Teste das gleich giopet.....


Ja, ihr habt recht....gibt ne Bootschleife.
Ich nehme das jetzt erst mal vom Feed. Leider wird kein crashlog erstellt.
Vermutlich wirds am streamripper liegen aber das müssen wir erst testen.

[wavemaster]

Habe auch das 1625 git 5256 drauf und auch Probleme. Beim Aufruf von OpenVPN sofort GS und auch einige andere Sachen laufen nicht so richtig.

[bonkel]

es gibt aber schon 1667....

[ivanko]

ipbox 910
1667

Funktioniert nicht EPG

[giopet]

Teste das gleich giopet.....


Ja, ihr habt recht....gibt ne Bootschleife.
Ich nehme das jetzt erst mal vom Feed. Leider wird kein crashlog erstellt.
Vermutlich wirds am streamripper liegen aber das müssen wir erst testen.
Hatte Gestern Abend mich wieder am letzten gst Image versucht,leider mit gleichem Ergebnis,wieder Dauerbootschleife.Bin mir nur nicht sicher,ob es wieder am SHOUTcast Plugin liegt,er funktioniert zwar jetzt,aber das Problem ist geblieben.Werde heut Abend wieder neu Flashen und erst wieder nur den SHOUTcast Plugin installieren,mal sehen,ob es wieder daran liegt.

[giopet]

Ok,
folgendes grad getestet:letztes gst Image mit meinen SHOUTcast Plugin aus dem et9200 mipsel Receiver,läuft alles ohne Probs,dann den Plugin wieder deinstalliert,den SHOUTcast Plugin vom Feed genommen und wieder Dauerschleife.Ist ein bissl nervig,jedes mal neu zu flashen.
Stelle mal das SHOUTcast Plugin was bei mir ohne Probs läuft hier rein,könnt ihr ja mal testen.

[bonkel]

wir könnten mal nen log von der schleife gebrauchen
den das shoutcast aufm feed is das aktuellste

[giopet]

Ok,dann flashe es nochmal von vorn und nur mit dem SHOUTcast Plugin drauf.Hoffe,daß der log zu gebrauchen ist,melde mich gleich dann mit dem log.

[giopet]

Ok,hier der ganze log in zwei Teilen zusammengefasst:
Teil 1:

U-Boot 1.3.1 (Aug 10 2010 - 15:48:57) - stm23-2008-03-19
Board: cuberevo-mini II (0x2D42C041)
Board: 14 dotmatrix vfd front
DRAM: 128 MB
Flash: 32 MB
In: serial
Out: serial
Err: serial
Reserve 0x2010000 bytes from 0xa5ff0000 for DGS upgrade buffer.
no such a key.(ethaddr)
booting...
(Re)start USB...
USB: scanning bus for devices... 2 USB Device(s) found
scanning bus for storage devices... 1 Storage Device(s) found

1714225 bytes read
## Booting image at a5ff0000 ...
Image Name: Linux-2.6.32.46_stm24_0209
Image Type: SuperH Linux Kernel Image (gzip compressed)
Data Size: 1714161 Bytes = 1.6 MB
Load Address: 84001000
Entry Point: 84002000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK

Warning: Unable to determine if kernel is built for 29- or 32-bit mode!

Starting kernel console=ttyAS1,115200 panic=3 root=/dev/sdb2 rw rootdelay=10 init=/bin/devinit ip=192.168.1.3:192.168.1.254:192.168.1.254:255.255 .255.0 mem=128m coprocessor_mem=4m@0x10000000,4m@0x10400000 - 0x00000000 - 0 ...

INIT: version 2.86 booting
init frontpanel
Mount /dev in tmpfs
Copying device nodes to /dev
Starting portmap daemon....
Hostname: IPBOX910.
init stmfb
offset key len data
found key tvmode ->value 0
SD-PAL
LOADING MODULES
load firmware
copLoadFile (file /boot/audio.elf)
ustslave: Kernel Version: 24
base_address 0x10400000
seeking to 0
seeking to 5f00
seeking to 12320
seeking to 1aa20
seeking to 173100
seeking to 173138
seeking to 173170
seeking to 1b9058
seeking to 1b9060
seeking to 1b9068
seeking to 1b9070
seeking to 1d0920
seeking to 1d0a00
copLoadFile (file /boot/video.elf)
ustslave: Kernel Version: 24
base_address 0x10000000
seeking to 0
seeking to 4e020
seeking to f8378
seeking to f83b0
seeking to f83e8
seeking to 10ce98
seeking to 10cea4
seeking to 10ceb0
seeking to 12ed90
seeking to 12cd74
seeking to 12ee00
init embx
init AVS
skip insmod tuner
Loading autofs
Starting autofs
Model: cuberevo-mini2
vBoxType: 11
Input device name: "TDT RC event driver"
Selected Remote: Cuberevo RemoteControl
RemoteControl Map:
KEY_F1 - 00 - 59
KEY_F2 - 01 - 60
KEY_F3 - 02 - 61
INFO - 03 - 358
RADIO - 04 - 385
PREVIOUS - 05 - 412
EPG - 06 - 365
RECORD - 07 - 167
FAVORITES - 08 - 364
MEDIA - 09 - 226
STANDBY - 0A - 116
KEY_F5 - 0B - 63
MUTE - 0C - 113
ARCHIVE - 0D - 361
0BUTTON - 10 - 11
1BUTTON - 11 - 2
2BUTTON - 12 - 3
3BUTTON - 13 - 4
4BUTTON - 14 - 5
5BUTTON - 15 - 6
6BUTTON - 16 - 7
7BUTTON - 17 - 8
8BUTTON - 18 - 9
9BUTTON - 19 - 10
UP - 1A - 103
DOWN - 1B - 108
RIGHT - 1C - 106
LEFT - 1D - 105
REWIND - 1E - 168
OK - 1F - 352
PLAY - 20 - 207
FASTFORWARD - 21 - 208
STOP - 22 - 128
SLOW - 23 - 409
AGAIN - 24 - 129
PAUSE - 25 - 119
MENU - 26 - 139
EXIT - 27 - 102
KEY_F7 - 28 - 65
KEY_BOOMARKS - 29 - 156
RED - 2A - 398
BLUE - 2B - 401
KEY_F8 - 2C - 66
GREEN - 2D - 399
YELLOW - 2E - 400
AUDIO - 2F - 392
SUBTITLE - 30 - 370
TEXT - 31 - 388
CHANNELUP - 32 - 402
CHANNELDOWN - 33 - 403
VOLUMEUP - 34 - 115
VOLUMEDOWN - 35 - 114
WWW - 36 - 150
Supports Long KeyPress: 1
processComplex >
period 10, delay 140
micom version = 2
Using period=10 delay=140
[SEM] DOWN
Mounting local filesystems...
tools/eplayer2.c >
Output
mode 1920, 1080, 32
stride = 7680, width 1920
12288k video mem
[playback/playback.c:PlaybackOpen] URI=file:///boot/bootvideo.mkv
container/container.c::Command
container/container.c::selectContainer
Selected Container: FFMPEG
[container/container_ffmpeg.c:container_ffmpeg_init] >
[container/container_ffmpeg.c:container_ffmpeg_init] filename file:///boot/bootvideo.mkv
[0;39m[0m[0;39m[0m[0;39mInput #0, mov,mp4,m4a,3gp,3g2,mj2, from 'file:///boot/bootvideo.mkv':
[0m[0;39m[0m[0;39m[0m[0;39m Metadata:
[0m[0;39m[0m[0;39m[0m[0;39m major_brand : [0m[0;39m[0m[0;39m[0m[0;39mmp42[0m[0;39m[0m[0;39m[0m[0;39m
[0m[0;39m[0m[0;39m[0m[0;39m minor_version : [0m[0;39m[0m[0;39m[0m[0;39m0[0m[0;39m[0m[0;39m[0m[0;39m
[0m[0;39m[0m[0;39m[0m[0;39m compatible_brands: [0m[0;39m[0m[0;39m[0m[0;39mmp42mp41[0m[0;39m[0m[0;39m[0m[0;39m
[0m[0;39m[0m[0;39m[0m[0;39m creation_time : [0m[0;39m[0m[0;39m[0m[0;39m2013-02-02 12:35:53[0m[0;39m[0m[0;39m[0m[0;39m
[0m[0;39m[0m[0;39m[0m[0;39m Duration: [0m[0;39m[0m[0;39m[0m[0;39m00:00:05.05[0m[0;39m[0m[0;39m[0m[0;39m, start: [0m[0;39m[0m[0;39m[0m[0;39m0.041708[0m[0;39m[0m[0;39m[0m[0;39m, bitrate: [0m[0;39m[0m[0;39m[0m[0;39m1022 kb/s[0m[0;39m[0m[0;39m[0m[0;39m
[0m[0;39m[0m[0;39m[0m[0;39m Stream #0:0[0m[0;39m[0m[0;39m[0m[0;39m(eng)[0m[0;39m[0m[0;39m[0m[0;39m: Video: h264 (avc1 / 0x31637661), yuv420p, 1280x720 [SAR 1:1 DAR 16:9], 1009 kb/s[0m[0;39m[0m[0;39m[0m[0;39m, 23.98 fps[0m[0;39m[0m[0;39m[0m[0;39m, 23.98 tbr[0m[0;39m[0m[0;39m[0m[0;39m, 23976 tbn[0m[0;39m[0m[0;39m[0m[0;39m, 47.95 tbc[0m[0;39m[0m[0;39m[0m[0;39m
[0m[0;39m[0m[0;39m[0m[0;39m Metadata:
[0m[0;39m[0m[0;39m[0m[0;39m creation_time : [0m[0;39m[0m[0;39m[0m[0;39m2013-02-02 12:35:53[0m[0;39m[0m[0;39m[0m[0;39m
[0m[0;39m[0m[0;39m[0m[0;39m handler_name : [0m[0;39m[0m[0;39m[0m[0;39mMainconcept MP4 Video Media Handler[0m[0;39m[0m[0;39m[0m[0;39m
[0m[container/container_ffmpeg.c:container_ffmpeg_init] number streams 1
[container/container_ffmpeg.c:container_ffmpeg_init] 0. encoding = V_MPEG4/ISO/AVC - version 0
[container/container_ffmpeg.c:container_ffmpeg_init] CODEC_TYPE_VIDEO 0
[container/container_ffmpeg.c:container_ffmpeg_init] frame_rate = 23.976000
[container/container_ffmpeg.c:container_ffmpeg_init] bit_rate = 1009521
[container/container_ffmpeg.c:container_ffmpeg_init] flags = 0
[container/container_ffmpeg.c:container_ffmpeg_init] frame_bits = 0
[container/container_ffmpeg.c:container_ffmpeg_init] time_base.den 23976
[container/container_ffmpeg.c:container_ffmpeg_init] time_base.num 1
[container/container_ffmpeg.c:container_ffmpeg_init] frame_rate 2997
[container/container_ffmpeg.c:container_ffmpeg_init] TimeScale 125
[container/container_ffmpeg.c:container_ffmpeg_init] frame_rate 23976
[container/container_ffmpeg.c:container_ffmpeg_init] TimeScale 1000
[container/text_srt.c:Command]
[container/text_srt.c:SrtGetSubtitle]
[container/text_srt.c:SrtGetSubtitle] file: /boot/bootvideo.mkv
[container/text_srt.c:SrtGetSubtitle] folder: /boot
[container/text_srt.c:SrtGetSubtitle] ext: mkv
[container/text_srt.c:SrtGetSubtitle] basename: bootvideo
[container/text_srt.c:SrtGetSubtitle] /boot/bootvideo
/boot | bootvideo | mkv
[container/text_srt.c:SrtGetSubtitle] <
[container/text_srt.c:Command] ret = 0
[container/text_ssa.c:Command]
[container/text_ssa.c:SsaGetSubtitle]
[container/text_ssa.c:SsaGetSubtitle] file: /boot/bootvideo.mkv
[container/text_ssa.c:SsaGetSubtitle] folder: /boot
[container/text_ssa.c:SsaGetSubtitle] ext: mkv
[container/text_ssa.c:SsaGetSubtitle] basename: bootvideo
[container/text_ssa.c:SsaGetSubtitle] /boot/bootvideo
/boot | bootvideo | mkv
[container/text_ssa.c:SsaGetSubtitle] <
[container/text_ssa.c:Command] ret = 0
[container/container_ass.c:container_ass_init] >
[container/container_ass.c:container_ass_init] width 1920, height 1080, share 1, fd 3, 3D 0
[ass] Fontconfig disabled, only default font will be used.
[playback/playback.c:PlaybackOpen] exiting with value 0
VideoTrack List
und - V_MPEG4/ISO/AVC
manager/subtitle.c::ManagerList
manager/subtitle.c::ManagerList return (nil) (0 - 0)
Current Audio Track : -1
Current Video Track : 0 V_MPEG4/ISO/AVC und
Current Subtitle Track : -1
[output/linuxdvb.c:LinuxDvbOpen] v1 a0
[output/linuxdvb.c:LinuxDvbOpen] ioctl failed with errno 22
[output/linuxdvb.c:LinuxDvbOpen] VIDEO_CLEAR_BUFFER: Invalid argument
[playback/playback.c:PlaybackPlay]
[output/linuxdvb.c:LinuxDvbPlay] v1 a0
[output/linuxdvb.c:LinuxDvbPlay] V V_MPEG4/ISO/AVC
[playback/playback.c:PlaybackPlay] Created thread
[playback/playback.c:PlaybackPlay] clearing isCreationPhase!
[container/container_ffmpeg.c:container_ffmpeg_play]
[container/container_ffmpeg.c:container_ffmpeg_play] is Playing
[container/container_ffmpeg.c:container_ffmpeg_play] Created thread
[container/container_ffmpeg.c:container_ffmpeg_play] exiting with value 0
[playback/playback.c:PlaybackPlay] exiting with value 0
Control:
al: List audio tracks
ac: List current audio track
a[id] Select audio track
sl: List subtitles
sc: List current subtitle
s[id] Select subtitles
q: Stop
c: Continue
p: Pause
f: Increase speed (Fast forward) (stepwise)
b: Decrease speed (Fast reverse) (stepwise)
l: Print duration
j: Print current PTS
k[1,4,7]: Jump back [15,60,300] seconds
k[3,6,9]: Jump forward [15,60,300] seconds
i: Print Info
Control:
al: List audio tracks
ac: List current audio track
a[id] Select audio track
sl: List subtitles
sc: List current subtitle
s[id] Select subtitles
q: Stop
c: Continue
p: Pause
f: Increase speed (Fast forward) (stepwise)
b: Decrease speed (Fast reverse) (stepwise)
l: Print duration
j: Print current PTS
[container/container_ffmpeg.c:FFMPEGThread]
[container/container_ffmpeg.c:FFMPEGThread] Running!
[playback/playback.c:SupervisorThread] >
k[1,4,7]: Jump back [15,60,300] seconds
k[3,6,9]: Jump forward [15,60,300] seconds
i: Print Info
Control:
al: List audio tracks
ac: List current audio track
a[id] Select audio track
sl: List subtitles
sc: List current subtitle
s[id] Select subtitles
q: Stop
c: Continue
p: Pause
f: Increase speed (Fast forward) (stepwise)
b: Decrease speed (Fast reverse) (stepwise)
l: Print duration
j: Print current PTS
k[1,4,7]: Jump back [15,60,300] seconds
k[3,6,9]: Jump forward [15,60,300] seconds
i: Print Info
Control:
al: List audio tracks
ac: List current audio track
a[id] Select audio track
sl: List subtitles
sc: List current subtitle
s[id] Select subtitles
q: Stop
c: Continue
p: Pause
f: Increase speed (Fast forward) (stepwise)
b: Decrease speed (Fast reverse) (stepwise)
l: Print duration
j: Print current PTS
k[1,4,7]: Jump back [15,60,300] seconds
k[3,6,9]: Jump forward [15,60,300] seconds
i: Print Info
Control:
al: List audio tracks
ac: List current audio track
a[id] Select audio track
sl: List subtitles
sc: List current subtitle
s[id] Select subtitles
q: Stop
c: Continue
p: Pause
f: Increase speed (Fast forward) (stepwise)
b: Decrease speed (Fast reverse) (stepwise)
l: Print duration
j: Print current PTS
k[1,4,7]: Jump back [15,60,300] seconds
k[3,6,9]: Jump forward [15,60,300] seconds
i: Print Info
Control:
al: List audio tracks
ac: List current audio track
a[id] Select audio track
sl: List subtitles
sc: List current subtitle
s[id] Select subtitles
q: Stop
c: Continue
p: Pause
f: Increase speed (Fast forward) (stepwise)
b: Decrease speed (Fast reverse) (stepwise)
l: Print duration
j: Print current PTS
k[1,4,7]: Jump back [15,60,300] seconds
k[3,6,9]: Jump forward [15,60,300] seconds
i: Print Info
Control:
al: List audio tracks
ac: List current audio track
a[id] Select audio track
sl: List subtitles
sc: List current subtitle
s[id] Select subtitles
q: Stop
c: Continue
p: Pause
f: Increase speed (Fast forward) (stepwise)
b: Decrease speed (Fast reverse) (stepwise)
l: Print duration
j: Print current PTS
k[1,4,7]: Jump back [15,60,300] seconds
k[3,6,9]: Jump forward [15,60,300] seconds
i: Print Info
Control:
al: List audio tracks
ac: List current audio track
a[id] Select audio track
sl: List subtitles
sc: List current subtitle
s[id] Select subtitles
q: Stop
c: Continue
p: Pause
f: Increase speed (Fast forward) (stepwise)
b: Decrease speed (Fast reverse) (stepwise)
l: Print duration
j: Print current PTS
k[1,4,7]: Jump back [15,60,300] seconds
k[3,6,9]: Jump forward [15,60,300] seconds
i: Print Info
Control:
al: List audio tracks
ac: List current audio track
a[id] Select audio track
sl: List subtitles
sc: List current subtitle
s[id] Select subtitles
[container/container_ffmpeg.c:FFMPEGThread] no data ->end of file reached ?
[container/container_ffmpeg.c:FFMPEGThread] terminating
q: Stop
c: Continue
p: Pause
f: Increase speed (Fast forward) (stepwise)
b: Decrease speed (Fast reverse) (stepwise)
l: Print duration
j: Print current PTS
k[1,4,7]: Jump back [15,60,300] seconds
k[3,6,9]: Jump forward [15,60,300] seconds
i: Print Info
Control:
al: List audio tracks
ac: List current audio track
a[id] Select audio track
sl: List subtitles
sc: List current subtitle
s[id] Select subtitles
q: Stop
c: Continue
p: Pause
f: Increase speed (Fast forward) (stepwise)
b: Decrease speed (Fast reverse) (stepwise)
l: Print duration
j: Print current PTS
k[1,4,7]: Jump back [15,60,300] seconds
k[3,6,9]: Jump forward [15,60,300] seconds
i: Print Info
Control:
al: List audio tracks
ac: List current audio track
a[id] Select audio track
sl: List subtitles
sc: List current subtitle
s[id] Select subtitles
q: Stop
c: Continue
p: Pause
f: Increase speed (Fast forward) (stepwise)
b: Decrease speed (Fast reverse) (stepwise)
l: Print duration
j: Print current PTS
k[1,4,7]: Jump back [15,60,300] seconds
k[3,6,9]: Jump forward [15,60,300] seconds
i: Print Info
Control:
al: List audio tracks
ac: List current audio track
a[id] Select audio track
sl: List subtitles
sc: List current subtitle
s[id] Select subtitles
q: Stop
c: Continue
p: Pause
[playback/playback.c:SupervisorThread] container has ended, syncing to playback pts ...
[output/linuxdvb.c:LinuxDvbFlush] v1 a0
f: Increase speed (Fast forward) (stepwise)
b: Decrease speed (Fast reverse) (stepwise)
l: Print duration
j: Print current PTS
k[1,4,7]: Jump back [15,60,300] seconds
k[3,6,9]: Jump forward [15,60,300] seconds
i: Print Info
Control:
al: List audio tracks
ac: List current audio track
a[id] Select audio track
sl: List subtitles
sc: List current subtitle
s[id] Select subtitles
q: Stop
c: Continue
p: Pause
f: Increase speed (Fast forward) (stepwise)
b: Decrease speed (Fast reverse) (stepwise)
l: Print duration
j: Print current PTS
k[1,4,7]: Jump back [15,60,300] seconds
k[3,6,9]: Jump forward [15,60,300] seconds
i: Print Info
Control:
al: List audio tracks
ac: List current audio track
a[id] Select audio track
sl: List subtitles
sc: List current subtitle
s[id] Select subtitles
q: Stop
c: Continue
p: Pause
f: Increase speed (Fast forward) (stepwise)
b: Decrease speed (Fast reverse) (stepwise)
l: Print duration
j: Print current PTS
k[1,4,7]: Jump back [15,60,300] seconds
k[3,6,9]: Jump forward [15,60,300] seconds
i: Print Info
Control:
al: List audio tracks
ac: List current audio track
a[id] Select audio track
sl: List subtitles
sc: List current subtitle
s[id] Select subtitles
q: Stop
c: Continue
p: Pause
f: Increase speed (Fast forward) (stepwise)
b: Decrease speed (Fast reverse) (stepwise)
l: Prwise)
l: Print duration
j: Print current PTS
k[1,4,7]: Jump back [15,60,300] seconds
k[3,6,9]: Jump forward [15,60,300] seconds
i: Print Info
Control:
al: List audio tracks
ac: List current audio track
a[id] Select audio track
sl: List subtitles
sc: List current subtitle
s[id] Select subtitles
q: Stop
c: Continue
p: Pause
f: Increase speed (Fast forward) (stepwise)
b: Decrease speed (Fast reverse) (stepwise)
l: Print duration
j: Print current PTS
k[1,4,7]: Jump back [15,60,300] seconds
k[3,6,9]: Jump forward [15,60,300] seconds
i: Print Info
Control:
al: List audio tracks
ac: List current audio track
a[id] Select audio track
sl: List subtitles
sc: List current subtitle
s[id] Select subtitles
q: Stop
c: Continue
p: Pause
f: Increase speed (Fast forward) (stepwise)
b: Decrease speed (Fast reverse) (stepwise)
l: Print duration
j: Print current PTS
k[1,4,7]: Jump back [15,60,300] seconds
k[3,6,9]: Jump forward [15,60,300] seconds
i: Print Info
Control:
al: List audio tracks
ac: List current audio track
a[id] Select audio track
sl: List subtitles
sc: List current subtitle
s[id] Select subtitles
q: Stop
c: Continue
p: Pause
f: Increase speed (Fast forward) (stepwise)
b: Decrease speed (Fast reverse) (stepwise)
l: Print duration
j: Print current PTS
k[1,4,7]: Jump back [15,60,300] seconds
k[3,6,9]: Jump forward [15,60,300] seconds
i: Print Info
Control:
al: List audio tracks
ac: List current audio track
a[id] Select audio track
sl: List subtitles
sc: List current subtitle
s[id] Select subtitles
q: Stop
c: Continue
p: Pause
f: Increase speed (Fast forward) (stepwise)
b: Decrease speed (Fast reverse) (stepwise)
l: Print duration
j: Print current PTS
k[1,4,7]: Jump back [15,60,300] seconds
k[3,6,9]: Jump forward [15,60,300] seconds
i: Print Info
Control:
al: List audio tracks
ac: List current audio track
a[id] Select audio track
sl: List subtitles
sc: List current subtitle
s[id] Select subtitles
q: Stop
c: Continue
p: Pause
f: Increase speed (Fast forward) (stepwise)
b: Decrease speed (Fast reverse) (stepwise)
l: Print duration
j: Print current PTS
k[1,4,7]: Jump back [15,60,300] seconds
k[3,6,9]: Jump forward [15,60,300] seconds
i: Print Info
Control:
al: List audio tracks
ac: List current audio track
a[id] Select audio track
sl: List subtitles
sc: List current subtitle
s[id] Select subtitles
q: Stop
c: Continue
p: Pause
f: Increase speed (Fast forward) (stepwise)
b: Decrease speed (Fast reverse) (stepwise)
l: Print duration
j: Print current PTS
k[1,4,7]: Jump back [15,60,300] seconds
k[3,6,9]: Jump forward [15,60,300] seconds
i: Print Info
Control:
al: List audio tracks
ac: List current audio track
a[id] Select audio track
sl: List subtitles
sc: List current subtitle
s[id] Select subtitles
q: Stop
c: Continue
p: Pause
f: Increase speed (Fast forward) (stepwise)
b: Decrease speed (Fast reverse) (stepwise)
l: Print duration
j: Print current PTS
k[1,4,7]: Jump back [15,60,300] seconds
k[3,6,9]: Jump forward [15,60,300] seconds
i: Print Info
Control:
al: List audio tracks
ac: List current audio track
a[id] Select audio track
sl: List subtitles
sc: List current subtitle
s[id] Select subtitles
q: Stop
c: Continue
p: Pause
f: Increase speed (Fast forward) (stepwise)forward [15,60,300] seconds
i: Print Info
Control:
al: List audio tracks
ac: List current audio track
a[id] Select audio track
sl: List subtitles
sc: List current subtitle
s[id] Select subtitles
q: Stop
c: Continue
p: Pause
f: Increase speed (Fast forward) (stepwise)
b: Decrease speed (Fast reverse) (stepwise)
l: Print duration
j: Print current PTS
k[1,4,7]: Jump back [15,60,300] seconds
k[3,6,9]: Jump forward [15,60,300] seconds
i: Print Info
Control:
al: List audio tracks
ac: List current audio track
a[id] Select audio track
sl: List subtitles
sc: List current subtitle
s[id] Select subtitles
q: Stop
c: Continue
p: Pause
f: Increase speed (Fast forward) (stepwise)
b: Decrease speed (Fast reverse) (stepwise)
l: Print duration
j: Print current PTS
k[1,4,7]: Jump back [15,60,300] seconds
k[3,6,9]: Jump forward [15,60,300] seconds
i: Print Info
Control:
al: List audio tracks
ac: List current audio track
a[id] Select audio track
sl: List subtitles
sc: List current subtitle
s[id] Select subtitles
q: Stop
c: Continue
p: Pause
f: Increase speed (Fast forward) (stepwise)
b: Decrease speed (Fast reverse) (stepwise)
l: Print duration
j: Print current PTS
k[1,4,7]: Jump back [15,60,300] seconds
k[3,6,9]: Jump forward [15,60,300] seconds
i: Print Info
Control:
al: List audio tracks
ac: List current audio track
a[id] Select audio track
sl: List subtitles
sc: List current subtitle
s[id] Select subtitles
q: Stop
c: Continue
p: Pause
f: Increase speed (Fast forward) (stepwise)
b: Decrease speed (Fast reverse) (stepwise)
l: Print duration
j: Print current PTS
k[1,4,7]: Jump back [15,60,300] seconds
k[3,6,9]: Jump forward [15,60,300] seconds
i: Print Info
Control:
al: List audio tracks
ac: List current audio track
a[id] Select audio track
sl: List subtitles
sc: List current subtitle
s[id] Select subtitles
q: Stop
c: Continue
p: Pause
f: Increase speed (Fast forward) (stepwise)
b: Decrease speed (Fast reverse) (stepwise)
l: Print duration
j: Print current PTS
k[1,4,7]: Jump back [15,60,300] seconds
k[3,6,9]: Jump forward [15,60,300] seconds
i: Print Info
Control:
al: List audio tracks
ac: List current audio track
a[id] Select audio track
sl: List subtitles
sc: List current subtitle
s[id] Select subtitles
q: Stop
Cleaning /tmpc: Continue
p: Pause
f: Increase speed (Fast forward) (stepwise)
b: Decrease speed (Fast reverse) (stepwise)
l: Print duration
j: Print current PTS
k[1,4,7]: Jump back [15,60,300] seconds
k[3,6,9]: Jump forward [15,60,300] seconds
i: Print Info
Control:
al: List audio tracks
ac: List current audio track
a[id] Select audio track
sl: List subtitles
sc: List current subtitle
s[id] Select subtitles
q: Stop
c: Continue
p: Pause
f: Increase speed (Fast forward) (stepwise)
b: Decrease speed (Fast reverse) (stepwise)
l: Print duration
j: Print current PTS
k[1,4,7]: Jump back [15,60,300] seconds
k[3,6,9]: Jump forward [15,60,300] seconds
i: Print Info
Control:
al: List audio tracks
ac: List current audio track
a[id] Select audio track
sl: List subtitles
sc: List current subtitle
s[id] Select subtitles
q: Stop
c: Continue
p: Pause
f: Increase speed (Fast forward) (stepwise)
b: Decrease speed (Fast reverse) (stepwise)
l: Print duration
j: Print current PTS
k[1,4,7]: Jump back [15,60,300] seconds
k[3,6,9]: Jump forwwise)
l: Print duration
j: Print current PTS
k[1,4,7]: Jump back [15,60,300] seconds
k[3,6,9]: Jump forward [15,60,300] seconds
i: Print Info
Control:
al: List audio tracks
ac: List current audio track
a[id] Select audio track
sl: List subtitles
sc: List current subtitle
s[id] Select subtitles
q: Stop
c: Continue
p: Pause
f: Increase speed (Fast forward) (stepwise)
b: Decrease speed (Fast reverse) (stepwise)
l: Print duration
j: Print current PTS
k[1,4,7]: Jump back [15,60,300] seconds
k[3,6,9]: Jump forward [15,60,300] seconds
i: Print Info

[giopet]

Teil 2:


Control:
al: List audio tracks
ac: List current audio track
a[id] Select audio track
sl: List subtitles
sc: List current subtitle
s[id] Select subtitles
q: Stop
c: Continue
p: Pause
f: Increase speed (Fast forward) (stepwise)
b: Decrease speed (Fast reverse) (stepwise)
l: Print duration
j: Print current PTS
k[1,4,7]: Jump back [15,60,300] seconds
k[3,6,9]: Jump forward [15,60,300] seconds
i: Print Info
Control:
al: List audio tracks
ac: List current audio track
a[id] Select audio track
sl: List subtitles
sc: List current subtitle
s[id] Select subtitles
q: Stop
c: Continue
p: Pause
f: Increase speed (Fast forward) (stepwise)
b: Decrease speed (Fast reverse) (stepwise)
l: Print duration
j: Print current PTS
k[1,4,7]: Jump back [15,60,300] seconds
k[3,6,9]: Jump forward [15,60,300] seconds
i: Print Info
Control:
al: List audio tracks
ac: List current audio track
a[id] Select audio track
sl: List subtitles
sc: List current subtitle
s[id] Select subtitles
q: Stop
c: Continue
p: Pause
f: Increase speed (Fast forward) (stepwise)
b: Decrease speed (Fast reverse) (stepwise)
l: Print duration
j: Print current PTS
k[1,4,7]: Jump back [15,60,300] seconds
k[3,6,9]: Jump forward [15,60,300] seconds
i: Print Info
Control:
al: List audio tracks
ac: List current audio track
a[id] Select audio track
sl: List subtitles
sc: List current subtitle
s[id] Select subtitles
q: Stop
c: Continue
p: Pause
f: Increase speed (Fast forward) (stepwise)
b: Decrease speed (Fast reverse) (stepwise)
l: Print duration
j: Print current PTS
k[1,4,7]: Jump back [15,60,300] seconds
k[3,6,9]: Jump forward [15,60,300] seconds
i: Print Info
Control:
al: List audio tracks
ac: List current audio track
a[id] Select audio track
sl: List subtitles
sc: List current subtitle
s[id] Select subtitles
q: Stop
c: Continue
p: Pause
f: Increase speed (Fast forward) (stepwise)
b: Decrease speed (Fast reverse) (stepwise)
l: Print duration
j: Print current PTS
k[1,4,7]: Jump back [15,60,300] seconds
k[3,6,9]: Jump forward [15,60,300] seconds
i: Print Info
Control:
al: List audio tracks
ac: List current audio track
a[id] Select audio track
sl: List subtitles
sc: List current subtitle
s[id] Select subtitles
q: Stop
c: Continue
p: Pause
f: Increase speed (Fast forward) (stepwise)
b: Decrease speed (Fast reverse) (stepwise)
l: Print duration
j: Print current PTS
k[1,4,7]: Jump back [15,60,300] seconds
k[3,6,9]: Jump forward [15,60,300] seconds
i: Print Info
Control:
al: List audio tracks
ac: List current audio track
a[id] Select audio track
sl: List subtitles
sc: List current subtitle
s[id] Select subtitles
q: Stop
c: Continue
p: Pause
f: Increase speed (Fast forward) (stepwise)
b: Decrease speed (Fast reverse) (stepwise)
l: Pr
k[1,4,7]: Jump back [15,60,300] seconds
k[3,6,9]: Jump forward [15,60,300] seconds
i: Print Info
Control:
al: List audio tracks
ac: List current audio track
a[id] Select audio track
sl: List subtitles
sc: List current subtitle
s[id] Select subtitles
q: Stop
c: Continue
p: Pause
f: Increase speed (Fast forward) (stepwise)
b: Decrease speed (Fast reverse) (stepwise)
l: Print duration
j: Print current PTS
k[1,4,7]: Jump back [15,60,300] seconds
k[3,6,9]: Jump forward [15,60,300] seconds
i: Print Info
Control:
al: List audio tracks
ac: List current audio track
a[id] Select audio track
sl: List subtitles
sc: List current subtitle
s[id] Select subtitles
q: Stop
c: Continue
p: Pause
f: Increase speed (Fast forward) (stepwise)
b: Decrease speed (Fast reverse) (stepwise)
l: Print duration
j: Print current PTS
k[1,4,7]: Jump back [15,60,300] seconds
k[3,6,9]: Jump forward [15,60,300] seconds
i: Print Info
Control:
al: List audio tracks
ac: List current audio track
a[id] Select audio track
sl: List subtitles
sc: List current subtitle
s[id] Select subtitles
q: Stop
c: Continue
p: Pause
f: Increase speed (Fast forward) (stepwise)
b: Decrease speed (Fast reverse) (stepwise)
l: Print duration
j: Print current PTS
k[1,4,7]: Jump back [15,60,300] seconds
k[3,6,9]: Jump forward [15,60,300] seconds
i: Print Info
Control:
al: List audio tracks
ac: List current audio track
a[id] Select audio track
sl: List subtitles
sc: List current subtitle
s[id] Select subtitles
q: Stop
c: Continue
p: Pause
f: Increase speed (Fast forward) (stepwise)
b: Decrease speed (Fast reverse) (stepwise)
l: Print duration
j: Print current PTS
k[1,4,7]: Jump back [15,60,300] seconds
k[3,6,9]: Jump forward [15,60,300] seconds
i: Print Info
Control:
al: List audio tracks
ac: List current audio track
a[id] Select audio track
sl: List subtitles
sc: List current subtitle
s[id] Select subtitles
q: Stop
c: Continue
p: Pause
f: Increase speed (Fast forward) (stepwise)
b: Decrease speed (Fast reverse) (stepwise)
l: Print duration
j: Print current PTS
k[1,4,7]: Jump back [15,60,300] seconds
k[3,6,9]: Jump forward [15,60,300] seconds
i: Print Info
Control:
al: List audio tracks
ac: List current audio track
a[id] Select audio track
sl: List subtitles
sc: List current subtitle
s[id] Select subtitles
q: Stop
c: Continue
p: Pause
f: Increase speed (Fast forward) (stepwise)
b: Decrease speed (Fast reverse) (stepwise)
l: Print duration
j: Print current PTS
k[1,4,7]: Jump back [15,60,300] seconds
k[3,6,9]: Jump forward [15,60,300] seconds
i: Print Info
Control:
al: List audio tracks
ac: List current audio track
a[id] Select audio track
sl: List subtitles
sc: List current subtitle
s[id] Select subtitles
q: Stop
c: Continue
p: Pause
f: Increase speed (Fast forward) (stepwise)
b: Decrease speed (Fast reverse) (stepwise)
l: Print duration
j: Print current PTS
k[1,4,7]: Jump back [15,60,300] seconds
k[3,6,9]: Jump forward [15,60,300] seconds
i: Print Info
Control:
al: List audio tracks
ac: List current audio track
a[id] Select audio track
sl: List subtitles
sc: List current subtitle
s[id] Select subtitles
q: Stop
c: Continue
p: Pause
f: Increase speed (Fast forward) (stepwise)
b: Decrease speed (Fast reverse) (stepwise)
l: Print duration
j: Pr
i: Print Info
Control:
al: List audio tracks
ac: List current audio track
a[id] Select audio track
sl: List subtitles
sc: List current subtitle
s[id] Select subtitles
q: Stop
c: Continue
p: Pause
f: Increase speed (Fast forward) (stepwise)
b: Decrease speed (Fast reverse) (stepwise)
l: Print duration
j: Print current PTS
k[1,4,7]: Jump back [15,60,300] seconds
k[3,6,9]: Jump forward [15,60,300] seconds
i: Print Info
Control:
al: List audio tracks
ac: List current audio track
a[id] Select audio track
sl: List subtitles
sc: List current subtitle
s[id] Select subtitles
q: Stop
c: Continue
p: Pause
f: Increase speed (Fast forward) (stepwise)
b: Decrease speed (Fast reverse) (stepwise)
l: Print duration
j: Print current PTS
k[1,4,7]: Jump back [15,60,300] seconds
k[3,6,9]: Jump forward [15,60,300] seconds
i: Print Info
Control:
al: List audio tracks
ac: List current audio track
a[id] Select audio track
sl: List subtitles
sc: List current subtitle
s[id] Select subtitles
q: Stop
c: Continue
p: Pause
f: Increase speed (Fast forward) (stepwise)
b: Decrease speed (Fast reverse) (stepwise)
l: Print duration
j: Print current PTS
k[1,4,7]: Jump back [15,60,300] seconds
k[3,6,9]: Jump forward [15,60,300] seconds
i: Print Info
Control:
al: List audio tracks
ac: List current audio track
a[id] Select audio track
sl: List subtitles
sc: List current subtitle
s[id] Select subtitles
q: Stop
c: Continue
p: Pause
f: Increase speed (Fast forward) (stepwise)
b: Decrease speed (Fast reverse) (stepwise)
l: Print duration
j: Print current PTS
k[1,4,7]: Jump back [15,60,300] seconds
k[3,6,9]: Jump forward [15,60,300] seconds
i: Print Info
Control:
al: List audio tracks
ac: List current audio track
a[id] Select audio track
sl: List subtitles
sc: List current subtitle
s[id] Select subtitles
q: Stop
c: Continue
p: Pause
f: Increase speed (Fast forward) (stepwise)
b: Decrease speed (Fast reverse) (stepwise)
l: Print duration
j: Print current PTS
k[1,4,7]: Jump back [15,60,300] seconds
k[3,6,9]: Jump forward [15,60,300] seconds
i: Print Info
Control:
al: List audio tracks
ac: List current audio track
a[id] Select audio track
sl: List subtitles
sc: List current subtitle
s[id] Select subtitles
q: Stop
c: Continue
p: Pause
f: Increase speed (Fast forward) (stepwise)
b: Decrease speed (Fast reverse) (stepwise)
l: Print duration
j: Print current PTS
k[1,4,7]: Jump back [15,60,300] seconds
k[3,6,9]: Jump forward [15,60,300] seconds
i: Print Info
Control:
al: List audio tracks
ac: List current audio track
a[id] Select audio track
sl: List subtitles
sc: List current subtitle
s[id] Select subtitles
q: Stop
c: Continue
p: Pause
f: Increase speed (Fast forward) (stepwise)
b: Decrease speed (Fast reverse) (stepwise)
l: Print duration
j: Print current PTS
k[1,4,7]: Jump back [15,60,300] seconds
k[3,6,9]: Jump forward [15,60,300] seconds
i: Print Info
Control:
al: List audio tracks
ac: List current audio track
a[id] Select audio track
sl: List subtitles
sc: List current subtitle
s[id] Select subtitles
q: Stop
c: Continue
p: Pause
f: Increase speed (Fast forward) (stepwise)
b: Decrease speed (Fast reverse) (stepwise)
l: Print duration
j: Print current PTS
k[1,4,7]: Jump back [15,60,300] seconds
k[3,6,9]: Jump forw[id] Select audio track
sl: List subtitles
sc: List current subtitle
s[id] Select subtitles
q: Stop
c: Continue
p: Pause
f: Increase speed (Fast forward) (stepwise)
b: Decrease speed (Fast reverse) (stepwise)
l: Print duration
j: Print current PTS
k[1,4,7]: Jump back [15,60,300] seconds
k[3,6,9]: Jump forward [15,60,300] seconds
i: Print Info
Control:
al: List audio tracks
ac: List current audio track
a[id] Select audio track
sl: List subtitles
sc: List current subtitle
s[id] Select subtitles
q: Stop
c: Continue
p: Pause
f: Increase speed (Fast forward) (stepwise)
b: Decrease speed (Fast reverse) (stepwise)
l: Print duration
j: Print current PTS
k[1,4,7]: Jump back [15,60,300] seconds
k[3,6,9]: Jump forward [15,60,300] seconds
i: Print Info
Control:
al: List audio tracks
ac: List current audio track
a[id] Select audio track
sl: List subtitles
sc: List current subtitle
s[id] Select subtitles
q: Stop
c: Continue
p: Pause
f: Increase speed (Fast forward) (stepwise)
b: Decrease speed (Fast reverse) (stepwise)
l: Print duration
j: Print current PTS
k[1,4,7]: Jump back [15,60,300] seconds
k[3,6,9]: Jump forward [15,60,300] seconds
i: Print Info
Control:
al: List audio tracks
ac: List current audio track
a[id] Select audio track
sl: List subtitles
sc: List current subtitle
s[id] Select subtitles
q: Stop
c: Continue
p: Pause
f: Increase speed (Fast forward) (stepwise)
b: Decrease speed (Fast reverse) (stepwise)
l: Print duration
j: Print current PTS
k[1,4,7]: Jump back [15,60,300] seconds
k[3,6,9]: Jump forward [15,60,300] seconds
i: Print Info
Control:
al: List audio tracks
ac: List current audio track
a[id] Select audio track
sl: List subtitles
sc: List current subtitle
s[id] Select subtitles
q: Stop
c: Continue
p: Pause
f: Increase speed (Fast forward) (stepwise)
b: Decrease speed (Fast reverse) (stepwise)
l: Print duration
j: Print current PTS
k[1,4,7]: Jump back [15,60,300] seconds
k[3,6,9]: Jump forward [15,60,300] seconds
i: Print Info
Control:
al: List audio tracks
ac: List current audio track
a[id] Select audio track
sl: List subtitles
sc: List current subtitle
s[id] Select subtitles
q: Stop
c: Continue
p: Pause
f: Increase speed (Fast forward) (stepwise)
b: Decrease speed (Fast reverse) (stepwise)
starting telnetd
l: Print duration
j: Print current PTS
k[1,4,7]: Jump back [15,60,300] seconds
k[3,6,9]: Jump forward [15,60,300] seconds
i: Print Info
Control:
al: List audio tracks
ac: List current audio track
a[id] Select audio track
sl: List subtitles
sc: List current subtitle
s[id] Select subtitles
q: Stop
c: Continue
p: Pause
f: Increase speed (Fast forward) (stepwise)
b: Decrease speed (Fast reverse) (stepwise)
l: Print duration
j: Print current PTS
k[1,4,7]: Jump back [15,60,300] seconds
k[3,6,9]: Jump forward [15,60,300] seconds
i: Print Info
Control:
al: List audio tracks
ac: List current audio track
a[id] Select audio track
sl: List subtitles
sc: List current subtitle
s[id] Select subtitles
q: Stop
c: Continue
p: Pause
f: Increase speed (Fast forward) (stepwise)
b: Decrease speed (Fast reverse) (stepwise)
l: Print duration
j: Print current PTS
k[1,4,7]: Jump back [15,60,300] seconds
k[3,6,9]: Jump forward [15,60,300] seconds
i: Print Info
Control:
al: List audio tracks
ac: List current audio track
a[id] Select aurent PTS
k[1,4,7]: Jump back [15,60,300] seconds
k[3,6,9]: Jump forward [15,60,300] seconds
i: Print Info
[playback/playback.c:SupervisorThread] <
[output/linuxdvb.c:LinuxDvbFlush] v1 a0
[output/linuxdvb.c:LinuxDvbFlush] ioctl failed with errno 22
[output/linuxdvb.c:LinuxDvbFlush] VIDEO_FLUSH: Invalid argument
[output/linuxdvb.c:LinuxDvbFlush] exiting
[output/linuxdvb.c:reset] unknown video codec
[container/container_ffmpeg.c:container_ffmpeg_stop]
[container/container_ffmpeg.c:container_ffmpeg_stop] ret 0
[playback/playback.c:SupervisorThread] terminating
Control:
al: List audio tracks
ac: List current audio track
a[id] Select audio track
sl: List subtitles
sc: List current subtitle
s[id] Select subtitles
q: Stop
c: Continue
p: Pause
f: Increase speed (Fast forward) (stepwise)
b: Decrease speed (Fast reverse) (stepwise)
l: Print duration
j: Print current PTS
k[1,4,7]: Jump back [15,60,300] seconds
k[3,6,9]: Jump forward [15,60,300] seconds
i: Print Info
[output/linuxdvb.c:LinuxDvbClose] v1 a0
[output/linuxdvb.c:LinuxDvbStop] v1 a0
[output/linuxdvb.c:LinuxDvbStop] ioctl failed with errno 22
[output/linuxdvb.c:LinuxDvbStop] VIDEO_CLEAR_BUFFER: Invalid argument
vsftpd.
[output/linuxdvb.c:reset] unknown video codec
showSinglePic /boot/bootlogo.mvi
swapon: can't stat 'swapfile1': No such file or directory
VIDEO_SELECT_SOURCE MEMORY (Success)
VIDEO_PLAY (Success)
VIDEO_CONTINUE: (Success)
VIDEO_CLEAR_BUFFER: (Invalid argument)
Simple mixer control 'Analog',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback -31 - 31
Mono: Playback 15 [74%] [on]
Deconfiguring network interfaces... Simple mixer control 'SPDIF',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback -31 - 31
Mono: Playback 15 [74%] [on]
Simple mixer control 'HDMI',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback -31 - 31
Mono: Playback 15 [74%] [on]
LOADING E2
starting e2->
done.
Setting up IP spoofing protection: rp_filter.
Configuring network interfaces... done.
/usr/local/bin/enigma2: symbol lookup error: /usr/lib/libgstreamer-0.10.so.0: undefined symbol: g_error_get_type
e2 ended <- RTV: 127
*
ERROR
starting e2->
INIT: Switching to runlevel: 6
INIT: Sending processes the TERM signal
Sending all processes the TERM signal...done.
Sending all processes the KILL signal...done.
Deactivating swap...umount: tmpfs busy - remounted read-only
swapoff: can't stat 'LABEL=SWAPPART': No such file or directory
done.
Unmounting local filesystems...umount: tmpfs busy - remounted read-only
done.
Rebooting... /bin/fp_control: SW Version 1.03
Model: cuberevo-mini2
vBoxType: 11
Selected Model: CUBEREVO frontpanel control utility
init
checkConfig
configs: DISPLAY = 1, DISPLAYCUSTOM = 1, CUSTOM = %H:%M:%S
, WAKEUPDECREMENT 300
getTimeFromArg
getTimeFromArg <

[bonkel]

ich pass mal was an, und ab morgen is es dann aufm ipk feed zum laden

[giopet]

Ok,dann werde ich es Morgen Abend wieder testen.

[marto]

Finally the problem with Shoutcast plugin is fixed in HDMU_10630. Thank you!

[giopet]

Jepp,kann ich jetzt auch bestätigen,SHOUTcast läuft jetzt ohne Probs auf den gst Images,Danke!