Archiv verlassen und diese Seite im Standarddesign anzeigen : STB7100 bord de référence cpu family: sh4
samkooke
27.03.2013, 15:05
hello I have a receiver family sh4 I would like to put in enigma2 if possible I said there is no rs232 here is a log thank you to the expert .
samkooke
28.03.2013, 09:56
hello all person help me .
You have to see about your mother-board and locate the connector or the pitches prepared to leave the UARTx used to debug service!
For example, Fulan STi7111 series has four UART ... but as seen in the circuit diagram, only two are used for the debug service purpose (UART2 & UART3).
Others (UART0 and UART1) are configurated for used how general PIO (IN/OUT) access to other devices inside!
So every mother-board revision with its STicore chipset may be different from the other !
Ciao ... arci
samkooke
28.03.2013, 14:42
hello thank you for reponse UART0 but I do not know where it is.
The easiest thing is to open the receiver and take several photos of the mother-board.
You'll see that someone can help you !
rgs ... arci
samkooke
28.03.2013, 15:05
ok thank you tonight I am the office.
If you have not yet found!!
With google you can find the SDK document ...
... This will be very useful!
Needless to say that these are confidential documents!
rgs ... arci
samkooke
28.03.2013, 16:07
ok thank you for your help
samkooke
28.03.2013, 18:32
3670
hello arci
3670
hello arci
Hi
I see a module transceiver MAX232 (convert interface for RS232 to TTL UART signal) ... Is it of your receiver ?
If yes !?!
On the connector (CON 3 PS103) there are the TX/RX signal converted to RS232 EIA (PC- standard) ...
[CON 3] You can take RXD (IN pin 1) - TXD (OUT pin 2) - GND (pin 3) for connected to RS232 DIP9 (serial comunication port) of your PC ...
For right connection on PC RS232 DIP 9 Female ... refer to standard pinout (RX/TX) !
P.S. On attached image ... there is the pinout of the MAX232 IC!
3671
rgs ... arci
I moved this thread to sh4 duckbox Project, because it´s no HDMU Image possible.
samkooke
29.03.2013, 09:22
I moved this thread to sh4 duckbox Project, because it´s no HDMU Image possible.
hello and how I can put him HDMU Core thank you.
First you have integrate your Box in tdt-git, but this Box is to old, i don't think that anybody realy have time to do this.
samkooke
29.03.2013, 09:39
ok thank you for the answer I can not do anything?
maybe, i don´t know which drivers maybe are possible for your box, there will be a lot of work.
You can look in tdt-git.
samkooke
29.03.2013, 09:50
ok I do not know linux and programming thank you.
samkooke
31.03.2013, 17:32
hello all I feel like he has the ipbox 91HD.
Yes ipbox 91 also don't have a serial Port, but have a 7109 chipset.
samkooke
31.03.2013, 20:28
ok santa thank you but the problem I do not know how?
samkooke
03.04.2013, 18:04
hello to expert what to do with this receiver.
samkooke
17.04.2013, 13:42
hello all person for to help me.
samkooke
23.07.2014, 12:46
hello good news for ariva link200 enigma2
you state good news or are you asking for?
samkooke
23.07.2014, 13:17
for me not I have a ariva link 100 the problem is tuner chipset my tuner chipset is LG MONTAGE M88DS3002 M88TS2022.
- - - Updated - - -
is not possible of include it into GIT
Powered by vBulletin® Version 4.2.5 Copyright ©2024 Adduco Digital e.K. und vBulletin Solutions, Inc. Alle Rechte vorbehalten.