PDA

Archiv verlassen und diese Seite im Standarddesign anzeigen : Zusatzinformationen zu den Flashimages der 1028/AT7500



santa
20.04.2013, 21:13
Da wir in letzter Zeit auf den gst Player und noch ein paar andere Dinge gesetzt haben ist unser
Image etwas größer geworden, somit ist die Box vom Speicher her an seine Grenzen gestoßen.

Die Box hat aber noch einen ungenutzten Bereich den wir nun benutzen und somit wieder ein
paar MB damit freigeben können, Aber Achtung, viel Platz ist trotzdem nicht vorhanden.


Was müsst ihr dazu machen, wenn ihr Glück habt nur ein aktuelles Image flashen, also ab rev 10906.
Mit Pech müsst ihr manuell den Bereich einmalig freigeben, dazu müsst ihr euch mit telnet auf die
Box einloggen und folgendes eingeben:

df -h

das sollte dann so aussehen:

AT7500:~# df -hFilesystem Size Used Available Use% Mounted on
/dev/root 44.4M 43.8M 568.0K 99% /
tmpfs 57.0M 0 57.0M 0% /ram
/dev/root 44.4M 43.8M 568.0K 99% /dev.static
tmpfs 57.0M 0 57.0M 0% /dev
tmpfs 57.0M 0 57.0M 0% /dev/shm
tmpfs 57.0M 8.0K 57.0M 0% /tmp
/dev/mtdblock2 6.9M 3.2M 3.6M 47% /boot

wenn unten nur /dev/mtdblock2 steht und nur dann bitte dies eingeben:

flash_eraseall -j /dev/mtd4

dann sollte es so aussehen, bzw so sieht es auch aus wenn ihr nichts machen müsst:

AT7500:~# df -hFilesystem Size Used Available Use% Mounted on
/dev/root 44.4M 40.0M 4.4M 90% /
tmpfs 57.0M 0 57.0M 0% /ram
/dev/root 44.4M 40.0M 4.4M 90% /dev.static
tmpfs 57.0M 0 57.0M 0% /dev
tmpfs 57.0M 0 57.0M 0% /dev/shm
tmpfs 57.0M 4.0K 57.0M 0% /tmp
/dev/mtdblock2 6.9M 3.2M 3.6M 47% /boot
/dev/mtdblock4 6.9M 5.3M 1.6M 77% /media/internalswap

Wenn ihr euch nicht sicher seit, dann bitte vorher fragen.

et76
14.10.2016, 06:26
Hallo, hab da was zur Info in einem anderen Forum gefunden, Nachtfalke. Wenn dies erlaubt ist, lasst es drin, Greetz.

Error Codes (Err 0x..)

Wenn es mal zu Komplikationen kommt werfen
die Octagons in der Regel auf dem Frontdisplay einen Error-Code (Err 0x..) aus.

Anhand dieser Liste könnt Ihr nachschauen was dieser heißt und was zu tun ist
damit das System wieder einbahnfrei funktioniert:

0x00 No Error - No Error
0x01 Application Error - Error on Application sector Download s/w(*.ird) via Serial
0x02 BlockXpress Error on releasing condensation - Check RAM and related circuit
0x03 InvalidFlash - No supported Flash Memory
0x04 Security Main BCB - Check security chip and related circuit on main board
0x05 Security Front PCB - Check security chip and related circuit on front board
0x10 SystemId Different System ID - Check System ID of s/w in receiver and that of a new s/w
0x11 Range Overcapacity of downloading file - Delete useless language and secure capacity
0x12 UartTimeOut Error on Serial communication - Close all the programs except download program in PC
0x13 BlockCrc Error on downloaded s/w(*.ird) - Download s/w(*.ird) again
0x14 DataType - No supported data type
0x15 XfdVer - No supported s/w version
0x20 OtaCancel Cancel OTA
0x21 OtaTimeOut - OTA is not finnished within the time
0x22 OtaCrc32 - Problem on OTA file
0x23 OtaNoNIT[2]
0x24 OtaNoSVC No locking with OTA TP - Check antenna cable connection
0x25 OtaNoDSI[2]
0x26 OtaNoDII[2]
0x27 OtaNoDDB[2]
0x28 OtaNewDSI[2]
0x70 Kernel Kernel Error - Downlaod s/w(*.ird) again
0x71 rootfs rootfs Error - Downlaod s/w(*.ird) again
0x72 device fs Device file system error Downlaod s/w(*.ird) again
0x80 FlashWriting Error during wrting on Flash Check Flash related circuit
0x81 EepromWriting Error during wrting on Eeprom - Check Eeprom related circuit
0x82 XfdmWriting IRD Write ERROR - Check Flash related circuit
0x83 EepromReading Error on reading Eeprom - Check Eeprom related circuit
0x90 USBNotFound Error on finding USB device - No supported USB device, change USB device
0x91 USBFatReadErr Error on reading FAT in USB device - Format USB device with FAT
0x92 USBFileFound Error on finding s/w (*.ird) in connected USB device
- Check the existence of s/w (*.ird) in USB device
0x93 USBReadErr Error on reading s/w(*.ird) in the connected USB device
- Format USB device with FAT, copy s/w(*.ird) to the USB device, and then download it again
0x94 USBDecompErr Error on reading s/w(*.ird) in the connected USB device
- Format USB device with FAT, copy s/w(*.ird) to the USB device, and then download it again