Archiv verlassen und diese Seite im Standarddesign anzeigen : [spark] HDMU_481_E2_spark_209_git_4120_nodebug_nolcd_Flash
GI S8120
Log:
Board: STx7111-Mboard (MB618) [32-bit mode]
info: Disregarding any EPLD
U-Boot 1.3.1-g057e7c28 (Oct 21 2011 - 09:58:11) - stm23_0043 - YW 1.0.021 Rel
DRAM: 128 MiB
NOR: 8 MiB
NAND: 512 MiB
In: serial
Out: serial
Err: serial
IdentID : 09 00 0b 00 00 ca 5e
Hit ESC to stop autoboot: 0
Loading from NAND 512MiB 3,3V 8-bit, offset 0x18000000
Image Name: Linux-2.6.32.46_stm24_0209
Image Type: SuperH Linux Kernel Image (gzip compressed)
Data Size: 2606020 Bytes = 2.5 MiB
Load Address: 80801000
Entry Point: 80802000
## Booting image at 80000000 ...
Image Name: Linux-2.6.32.46_stm24_0209
Image Type: SuperH Linux Kernel Image (gzip compressed)
Data Size: 2606020 Bytes = 2.5 MiB
Load Address: 80801000
Entry Point: 80802000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
found phy at addres = 1
stmac_phy_get_addr(): id1 = 0x7, id2 = 0xc0f1
stb_id = 90b00ca5e
Starting kernel console=ttyAS1,115200 root=/dev/mtdblock6 rootfstype=jffs2 rw init=/bin/devinit coprocessor_mem=4m@0x40000000,4m@0x40400000 printk=1 rw ip=172.100.100.249:172.100.100.174:172.100.100.174 :255.255.0.0:LINUX7109:eth0:off bigphysarea=6000 stmmaceth=msglvl:0,phyaddr:1,watchdog:5000 nwhwconf=device:eth0,hwaddr:24:00:0B:00:CA:5E Manufacture=Spark-Project STB_ID=09:00:0B:00:00:CA:5E - 0x00000000 - 0 ...
After reboot not starting
yes , we know that.
you have to do, a little trick.
install the image new.
then directly after the end of the assistent, after the first boot.
Shut down your box with the power switch at the back, not the menu, directly the power switch.
after this switch off, you can swith it on, and all reboots and shutdowns will work correctly.
Neipe ist das bei dir auch so wenn du per auto.network cifs nach media/net mounten willst das es nicht funzt ist zumindest bei mir so.
Wenn ich aber den Ordernamen Manuel bei media/net per ftp anlege z.b video dann wird er gemountet bei nächsten neustart das gleiche.
Weist du vielleicht abhilfe?
Hy! I whant to ask why not put in this image "restart to spark " or "Go to spark " menu items plugin witch reboot the box to spark imagine ? and can you make an future version ?
Thanks Barnes
because, all e2 images are the same ....
Neipe ist das bei dir auch so wenn du per auto.network cifs nach media/net mounten willst das es nicht funzt ist zumindest bei mir so.
Wenn ich aber den Ordernamen Manuel bei media/net per ftp anlege z.b video dann wird er gemountet bei nächsten neustart das gleiche.
Weist du vielleicht abhilfe?
hab ich nie probiert, weiss auch keine abhilfe, müssmer mal auf eine antwort , von den devs warten.
Nutzt du zum einbinden den netzwerk Mountmanager?
Das sollte eigentlich funktionieren. Wenn die die auto.network editierst, kann es zu problemen kommen.
Habe das zuerst auch so gemacht, gab aber immer irgendwelche probleme. (Mount wieder weg usw.)
Also versuche mal alles neu über den mountmanager zu machen, bei mir hat´s geholfen.
Nutzt du zum einbinden den netzwerk Mountmanager?
Das sollte eigentlich funktionieren. Wenn die die auto.network editierst, kann es zu problemen kommen.
Habe das zuerst auch so gemacht, gab aber immer irgendwelche probleme. (Mount wieder weg usw.)
Also versuche mal alles neu über den mountmanager zu machen, bei mir hat´s geholfen.
Hab ich schon Probiert leider kein erfolg ist komischer weise auch nur bei 481.
Danke für Eure Tipp´s
Habe gerade noch mal getestet und du hast recht.
Irgendwas klemmt da, auch wenn man alles so macht wie ich geschrieben habe.......müsste bonkel mal reinsehen.
Erstmal herzlichen dank für das 481er-Image, dank Neipes Tipp klappts auch mit dem Reboot :cool:
Zappen ist merklich flüssiger, Download von Plugins und Skins ohne probs.
Bei 600Mhz benötigt die Box nun 40 Sekunden fürs Booten.
Bugmeldung:
Habe den Netzwerkbrowser zum Einrichten eines NFS-Shares auf mein NAS genutzt, wird auch aktiviert und nach reboot auch als erfolgreich gemountet angezeigt.
Nur beim Zugriff auf den Mountpunkt gehts dann nicht mehr weiter, da hakts irgendwo.
edit: nach Änderung im Mount-Manager bei "als HDD-Ersatz nutzen" auf "ja" erfolgt der Zugriff auf das NAS nun problemlos.
40 sec ?
meine genau 50 mit 600 mhz ;)
nochmal gestoppt - sind 40 Sekunden bei 600 Mhz
bei 650 Mhz auch nicht schneller...
bei 450 Mhz (default) sinds 46 Sekunden auf meiner GM Reloaded.
...FTA-Sender als "Startsender" ?
usb oder flashimage ?
von wann bis wann sind die 40 sec.
ich messe von deepstandby bis live tv bild.
oder machst du yaffs die pinky variante :D
FTA als Startsender
nix pinky bzw yaffs
HDMU 481 Image im Flash
gemessen von Anzeige "boot" im Display bis Live-Bild/Ton
hmm . ok ab boot erst spart 4 sec, da komm ich auf 46, fehlt trotzdem noch 6, seltsam aber zu verkraften :Zum_fressen gern:
... naja ggf. spielen so "Kleinigkeiten" wie Stick/FP dran oder nicht auch ne Rolle... wobei eigentlich "Wurst" ob nun ...40-46-50 Sek. ...Hauptsache es Startet :sm15:
jo klar spielt das ne rolle, aber ich hatte nix drann , 0 plugins. ist klar egal, nur seltsam, und erklärt vllt warum die 210ner images bei einigen starten, und bei anderen nicht.
Erstmal herzlichen dank für das 481er-Image, dank Neipes Tipp klappts auch mit dem Reboot :cool:
Zappen ist merklich flüssiger, Download von Plugins und Skins ohne probs.
Bei 600Mhz benötigt die Box nun 40 Sekunden fürs Booten.
Bugmeldung:
Habe den Netzwerkbrowser zum Einrichten eines NFS-Shares auf mein NAS genutzt, wird auch aktiviert und nach reboot auch als erfolgreich gemountet angezeigt.
Nur beim Zugriff auf den Mountpunkt gehts dann nicht mehr weiter, da hakts irgendwo.
edit: nach Änderung im Mount-Manager bei "als HDD-Ersatz nutzen" auf "ja" erfolgt der Zugriff auf das NAS nun problemlos.
Schau mal bitte ob die mounts die du gemacht hast zwischendurch wieder verschwinden.
Es scheint da Probleme zu geben, leider haben wir den Fehler noch nicht lokalisieren können.
Da bitte ich euch um ein wenig Geduld.
jo klar spielt das ne rolle, aber ich hatte nix drann , 0 plugins. ist klar egal, nur seltsam, und erklärt vllt warum die 210ner images bei einigen starten, und bei anderen nicht.
Macht das Image beim GM wieder faxen was den neustart angeht? Beim Pingu null problemo.........
Mr.Mohamed Fouad
30.05.2012, 12:30
I think the last version work without this bug is
HDMU_395_E2_spark_207_git_4090_nodebug_Flash
@bonkel
The HRnigma, HDFreaks, RSP, Allrussian, EOS Neoprolux this image contains a menu option to "Restart to Spark" or "GO to spark." I believe that all images are the Same e2, then the image HDMU why not do this option? it would be nice if you could remote control again to start the spark (spark to reboot). I use this as a very good image HDMU
Thanks for a HDMU Team
Barnes !
how many times will you post your question again...ther will be no menu for that..all enigma2 image are the same....
No need for boot to spark. Useless.
But I use those image with great pleasure on Amiko Alien.
One thing bothers me a bit. The led display on the box is showing the channel name. But only at start-up. When I zap to another channel the led-display on the receiver stays on the first channel name. Even when I switch off to standby, the box is still showing that channel-name.
Is it at least possible to show the time in the display? I don't care about the channel name in the led-display. Thanks anyway for your great image. It's the best for my receiver!
no channel name will not come in our images...this is also a performance killer..
Powered by vBulletin® Version 4.2.5 Copyright ©2024 Adduco Digital e.K. und vBulletin Solutions, Inc. Alle Rechte vorbehalten.