PDA

Archiv verlassen und diese Seite im Standarddesign anzeigen : crash 11199 while installing



dvbdvb
12.08.2013, 10:00
Hi,

I just did a fresh install of 11199 on my GM triplex box. I previously had some issues ( http://www.hdmedia-universe.com/board/showthread.php?4119-reboot-when-opening-stream-in-vlc ) and was hoping those would be solved by now. However now I cannot get it installed properly. It crashes after scanning the services. Here is the output:



<?xml version="1.0" encoding="utf-8"?>
<HDMU>
<enigma2>
<crashdate>Sat Jan 1 01:14:24 2000</crashdate>
<compiledate>Jul 29 2013</compiledate>
<skin>skin.xml</skin>
<sourcedate>2013-05-28</sourcedate>
<rev>
<![CDATA[
-----====== HDMU 11199 enigma2 Git 5515 ======-----
]]>
</rev>
<freespace>
<![CDATA[
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/root 121856 50428 71428 41% /
tmpfs 58604 0 58604 0% /ram
/dev/root 121856 50428 71428 41% /dev.static
tmpfs 58604 0 58604 0% /dev
tmpfs 58604 0 58604 0% /dev/shm
tmpfs 58604 4 58600 0% /tmp
]]>
</freespace>
<freeram>
<![CDATA[
total used free shared buffers
Mem: 117208 77012 40196 0 0
-/+ buffers: 77012 40196
Swap: 0 0 0
]]>
</freeram>
<version>3.0.0</version>
</enigma2>
<image>
<stbmodel>spark7162</stbmodel>
<kernelversion>
<![CDATA[
Linux SPARK7162 2.6.32.59_stm24_0211 #1 PREEMPT Mon Jul 29 15:49:17 CEST 2013 sh4 GNU/Linux
]]>
</kernelversion>
<kernelcmdline>console=ttyAS1,115200 rw root=/dev/mtdblock6 rootfstype=jffs2 init=/bin/devinit coprocessor_mem=4m@0x40000000,4m@0x40400000 printk=1 ip=172.100.100.249:172.100.100.174:172.100.100.174 :255.255.0.0:Enigma2:eth0:off stmmaceth=msglvl:0,phyaddr:2,watchdog:5000 nwhwconf=device:eth0,hwaddr:30:00:07:00:0B:CD Manufacture=Spark-Project STB_ID=0C:00:07:00:00:0B:CD</kernelcmdline>
<nimsockets>NIM Socket 0:</nimsockets>
<imageversion>
<![CDATA[
version=0350200905300000
]]>
</imageversion>
<imageissue>
<!-- No such file or directory -->
</imageissue>
</image>
<crashlogs>
<enigma2crashlog>
<![CDATA[
l
(0)tune
OURSTATE: tuning
[SEC] startTuneTimeout 5000
[SEC] setVoltage 0
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
OURSTATE: failed, fatal
(0)tune
OURSTATE: tuning
[SEC] startTuneTimeout 5000
[SEC] setVoltage 0
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
OURSTATE: failed, fatal
(0)tune
OURSTATE: tuning
[SEC] startTuneTimeout 5000
[SEC] setVoltage 0
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
OURSTATE: failed, fatal
(0)tune
OURSTATE: tuning
[SEC] startTuneTimeout 5000
[SEC] setVoltage 0
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
OURSTATE: failed, fatal
(0)tune
OURSTATE: tuning
[SEC] startTuneTimeout 5000
[SEC] setVoltage 0
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
OURSTATE: failed, fatal
(0)tune
OURSTATE: tuning
[SEC] startTuneTimeout 5000
[SEC] setVoltage 0
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
OURSTATE: failed, fatal
(0)tune
OURSTATE: tuning
[SEC] startTuneTimeout 5000
[SEC] setVoltage 0
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
OURSTATE: failed, fatal
(0)tune
OURSTATE: tuning
[SEC] startTuneTimeout 5000
[SEC] setVoltage 0
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
OURSTATE: failed, fatal
(0)tune
OURSTATE: tuning
[SEC] startTuneTimeout 5000
[SEC] setVoltage 0
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
OURSTATE: failed, fatal
(0)tune
OURSTATE: tuning
[SEC] startTuneTimeout 5000
[SEC] setVoltage 0
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
(0)fe event: status 1f, inversion off, m_tuning 2
OURSTATE: ok
got pat
got pmt -2
got pmt 0
got sdt 0
SDT:
ONID: 22d4
SID 00b8: name 'Boing', provider_name 'Tele5'
SID 00b9: name 'Telecinco HD', provider_name 'Tele5'
SID 0130: name 'MTV', provider_name 'TELSON'
SID 0131: name 'Paramount Channel', provider_name 'TELSON'
got pmt -1
got nit, err -1
channel done!
(0)tune
OURSTATE: tuning
[SEC] startTuneTimeout 5000
[SEC] setVoltage 0
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
OURSTATE: failed, fatal
(0)tune
OURSTATE: tuning
[SEC] startTuneTimeout 5000
[SEC] setVoltage 0
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
OURSTATE: failed, fatal
(0)tune
OURSTATE: tuning
[SEC] startTuneTimeout 5000
[SEC] setVoltage 0
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
OURSTATE: failed, fatal
(0)tune
OURSTATE: tuning
[SEC] startTuneTimeout 5000
[SEC] setVoltage 0
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
OURSTATE: failed, fatal
(0)tune
OURSTATE: tuning
[SEC] startTuneTimeout 5000
[SEC] setVoltage 0
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
OURSTATE: failed, fatal
(0)tune
OURSTATE: tuning
[SEC] startTuneTimeout 5000
[SEC] setVoltage 0
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
(0)fe event: status 1f, inversion off, m_tuning 2
OURSTATE: ok
got pat
got pmt -2
got pmt 0
got pmt 0
got sdt 0
SDT:
ONID: 22d4
SID 9c41: name 'TVE-HD Pruebas', provider_name 'RTVE'
SID 9c42: name 'TDP', provider_name 'RTVE'
SID 9c45: name 'Radio Clasica HQ', provider_name 'RNE'
SID 9c46: name 'Radio 3', provider_name 'RNE'
SID 9c4a: name 'Canal Ingenieria', provider_name 'RTVE'
got pmt -1
got nit, err -1
channel done!
(0)tune
OURSTATE: tuning
[SEC] startTuneTimeout 5000
[SEC] setVoltage 0
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
OURSTATE: failed, fatal
(0)tune
OURSTATE: tuning
[SEC] startTuneTimeout 5000
[SEC] setVoltage 0
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
OURSTATE: failed, fatal
(0)tune
OURSTATE: tuning
[SEC] startTuneTimeout 5000
[SEC] setVoltage 0
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
OURSTATE: failed, fatal
(0)tune
OURSTATE: tuning
[SEC] startTuneTimeout 5000
[SEC] setVoltage 0
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
OURSTATE: failed, fatal
(0)tune
OURSTATE: tuning
[SEC] startTuneTimeout 5000
[SEC] setVoltage 0
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
OURSTATE: failed, fatal
(0)tune
OURSTATE: tuning
[SEC] startTuneTimeout 5000
[SEC] setVoltage 0
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
OURSTATE: failed, fatal
(0)tune
OURSTATE: tuning
[SEC] startTuneTimeout 5000
[SEC] setVoltage 0
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
OURSTATE: failed, fatal
(0)tune
OURSTATE: tuning
[SEC] startTuneTimeout 5000
[SEC] setVoltage 0
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
OURSTATE: failed, fatal
(0)tune
OURSTATE: tuning
[SEC] startTuneTimeout 5000
[SEC] setVoltage 0
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
OURSTATE: failed, fatal
(0)tune
OURSTATE: tuning
[SEC] startTuneTimeout 5000
[SEC] setVoltage 0
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
OURSTATE: failed, fatal
(0)tune
OURSTATE: tuning
[SEC] startTuneTimeout 5000
[SEC] setVoltage 0
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
OURSTATE: failed, fatal
(0)tune
OURSTATE: tuning
[SEC] startTuneTimeout 5000
[SEC] setVoltage 0
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
OURSTATE: failed, fatal
(0)tune
OURSTATE: tuning
[SEC] startTuneTimeout 5000
[SEC] setVoltage 0
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
OURSTATE: failed, fatal
(0)tune
OURSTATE: tuning
[SEC] startTuneTimeout 5000
[SEC] setVoltage 0
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
OURSTATE: failed, fatal
(0)tune
OURSTATE: tuning
[SEC] startTuneTimeout 5000
[SEC] setVoltage 0
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
OURSTATE: failed, fatal
(0)tune
OURSTATE: tuning
[SEC] startTuneTimeout 5000
[SEC] setVoltage 0
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
OURSTATE: failed, fatal
(0)tune
OURSTATE: tuning
[SEC] startTuneTimeout 5000
[SEC] setVoltage 0
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
OURSTATE: failed, fatal
(0)tune
OURSTATE: tuning
[SEC] startTuneTimeout 5000
[SEC] setVoltage 0
[SEC] setFrontend 1
setting frontend 0
main thread is non-idle! display spinner!
(0)fe event: status 0, inversion off, m_tuning 1
OURSTATE: failed, fatal
(0)tune
OURSTATE: tuning
[SEC] startTuneTimeout 5000
[SEC] setVoltage 0
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
(0)fe event: status 1f, inversion off, m_tuning 2
OURSTATE: ok
got pat
got pmt -2
got pmt 0
got pmt 0
got pmt 0
got sdt 0
SDT:
ONID: 22d4
SID 07e1: name '1 CanalSur TV', provider_name 'RTVA'
SID 07e2: name '2 CanalSur 2 Andalucia', provider_name 'RTVA'
SID 07e3: name 'Canal Sur Radio', provider_name 'RTVA'
SID 07e4: name 'FlamencoRadio.com', provider_name 'RTVA'
SID 07e6: name 'EHS.TV', provider_name ''
SID 07e7: name 'Canal Fiesta R.', provider_name 'RTVA'
SID 07e8: name 'R.A.I.', provider_name 'RTVA'
SID 07ea: name '3 CanalSur HD', provider_name 'RTVA'
SID 07eb: name 'EHS2.TV', provider_name 'AIERTA'
got pmt -1
got nit, err 0
dumping NIT
TSID: 0103 ONID: 22d4
Terr freq 778000000, bw 8000000, cr_hp 1, cr_lp 1, tm_mode 1, guard 3, hierarchy 0, const 2
try to add 778000000 2 1 0 3 1 1 8000000
update
already in todo list
descr<41>
channel done!
(0)tune
OURSTATE: tuning
[SEC] startTuneTimeout 5000
[SEC] setVoltage 0
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
OURSTATE: failed, fatal
(0)tune
OURSTATE: tuning
[SEC] startTuneTimeout 5000
[SEC] setVoltage 0
[SEC] setFrontend 1
setting frontend 0
main thread is non-idle! display spinner!
(0)fe event: status 0, inversion off, m_tuning 1
OURSTATE: failed, fatal
(0)tune
OURSTATE: tuning
[SEC] startTuneTimeout 5000
[SEC] setVoltage 0
main thread is non-idle! display spinner!
OURSTATE: failed, fatal
(0)tune
OURSTATE: tuning
[SEC] startTuneTimeout 5000
[SEC] setVoltage 0
[SEC] setFrontend 1
setting frontend 0
main thread is non-idle! display spinner!
(0)fe event: status 0, inversion off, m_tuning 1
OURSTATE: failed, fatal
(0)tune
OURSTATE: tuning
[SEC] startTuneTimeout 5000
[SEC] setVoltage 0
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
OURSTATE: failed, fatal
(0)tune
OURSTATE: tuning
[SEC] startTuneTimeout 5000
[SEC] setVoltage 0
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
OURSTATE: failed, fatal
(0)tune
OURSTATE: tuning
[SEC] startTuneTimeout 5000
[SEC] setVoltage 0
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
(0)fe event: status 1f, inversion off, m_tuning 2
OURSTATE: ok
got pat
got pmt -2
got pmt 0
got pmt 0
got sdt 0
SDT:
ONID: 22d4
SID 0156: name 'Xplora', provider_name 'La Sexta'
SID 0157: name 'laSexta3', provider_name 'La Sexta'
SID 0158: name 'laSexta HD', provider_name 'La Sexta'
SID 0423: name 'Energy', provider_name 'TELECINCO'
SID 0428: name 'Cuatro HD', provider_name 'TELECINCO'
got pmt -1
got nit, err -1
channel done!
(0)tune
OURSTATE: tuning
[SEC] startTuneTimeout 5000
[SEC] setVoltage 0
[SEC] setFrontend 1
setting frontend 0
main thread is non-idle! display spinner!
(0)fe event: status 0, inversion off, m_tuning 1
OURSTATE: failed, fatal
(0)tune
OURSTATE: tuning
[SEC] startTuneTimeout 5000
[SEC] setVoltage 0
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
OURSTATE: failed, fatal
(0)tune
OURSTATE: tuning
[SEC] startTuneTimeout 5000
[SEC] setVoltage 0
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
OURSTATE: failed, fatal
(0)tune
OURSTATE: tuning
[SEC] startTuneTimeout 5000
[SEC] setVoltage 0
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
(0)fe event: status 1f, inversion off, m_tuning 2
OURSTATE: ok
got nit, err 0
dumping NIT
TSID: 03e8 ONID: 22d4
descr<41>
Terr freq 762000000, bw 8000000, cr_hp 1, cr_lp 0, tm_mode 1, guard 3, hierarchy 0, const 2
try to add 762000000 2 1 0 3 0 1 8000000
is current
got pat
got pmt -2
got pmt 0
got pmt 0
got sdt 0
SDT:
ONID: 22d4
SID 019a: name 'La 1', provider_name 'RTVE'
SID 019b: name 'La 2', provider_name 'RTVE'
SID 019c: name '24h', provider_name 'RTVE'
SID 019d: name 'Clan', provider_name 'RTVE'
SID 019f: name 'Radio Nacional', provider_name 'RNE'
SID 01a0: name 'Radio 5 Información', provider_name 'RNE'
got pmt -1
channel done!
(0)tune
OURSTATE: tuning
[SEC] startTuneTimeout 5000
[SEC] setVoltage 0
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
OURSTATE: failed, fatal
(0)tune
OURSTATE: tuning
[SEC] startTuneTimeout 5000
[SEC] setVoltage 0
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
OURSTATE: failed, fatal
(0)tune
OURSTATE: tuning
[SEC] startTuneTimeout 5000
[SEC] setVoltage 0
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
OURSTATE: failed, fatal
(0)tune
OURSTATE: tuning
[SEC] startTuneTimeout 5000
[SEC] setVoltage 0
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
OURSTATE: failed, fatal
(0)tune
OURSTATE: tuning
[SEC] startTuneTimeout 5000
[SEC] setVoltage 0
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
OURSTATE: failed, fatal
(0)tune
OURSTATE: tuning
[SEC] startTuneTimeout 5000
[SEC] setVoltage 0
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
OURSTATE: failed, fatal
(0)tune
OURSTATE: tuning
[SEC] startTuneTimeout 5000
[SEC] setVoltage 0
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
OURSTATE: failed, fatal
(0)tune
OURSTATE: tuning
[SEC] startTuneTimeout 5000
[SEC] setVoltage 0
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
OURSTATE: failed, fatal
(0)tune
OURSTATE: tuning
[SEC] startTuneTimeout 5000
[SEC] setVoltage 0
[SEC] setFrontend 1
setting frontend 0
main thread is non-idle! display spinner!
(0)fe event: status 0, inversion off, m_tuning 1
OURSTATE: failed, fatal
(0)tune
OURSTATE: tuning
[SEC] startTuneTimeout 5000
[SEC] setVoltage 0
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
(0)fe event: status 1f, inversion off, m_tuning 2
OURSTATE: ok
got pat
got pmt -2
got pmt 0
got nit, err 0
dumping NIT
TSID: 0002 ONID: 22d4
Terr freq 842000000, bw 8000000, cr_hp 1, cr_lp 1, tm_mode 1, guard 3, hierarchy 0, const 2
try to add 842000000 2 1 0 3 1 1 8000000
is current
descr<41>
TSID: 000c ONID: 22d4
Terr freq 850000000, bw 8000000, cr_hp 1, cr_lp 1, tm_mode 1, guard 3, hierarchy 0, const 2
try to add 850000000 2 1 0 3 1 1 8000000
update
already in todo list
descr<41>
TSID: 000d ONID: 22d4
Terr freq 858000000, bw 8000000, cr_hp 1, cr_lp 1, tm_mode 1, guard 3, hierarchy 0, const 2
try to add 858000000 2 1 0 3 1 1 8000000
update
already in todo list
descr<41>
got sdt 0
SDT:
ONID: 22d4
SID 0154: name 'laSexta', provider_name 'La Sexta'
SID 0155: name 'GOL TELEVISIÓN', provider_name 'La Sexta'
descr<cd>
descr<ce>
SID 0421: name 'CUATRO', provider_name 'TELECINCO'
SID 0422: name 'DIVINITY', provider_name 'TELECINCO'
SID 0424: name 'NUEVE', provider_name 'TELECINCO'
got pmt -1
channel done!
(0)tune
OURSTATE: tuning
[SEC] startTuneTimeout 5000
[SEC] setVoltage 0
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
(0)fe event: status 1f, inversion off, m_tuning 2
OURSTATE: ok
got pat
got pmt -2
got pmt 0
got pmt 0
got sdt 0
SDT:
ONID: 22d4
SID 00b4: name 'Telecinco', provider_name 'TELECINCO'
SID 00b5: name 'FDF', provider_name 'TELECINCO'
SID 00b6: name 'LaSiete', provider_name 'TELECINCO'
SID 0132: name 'ABC Punto Radio', provider_name 'ABC Radio'
SID 0133: name 'Intereconomía', provider_name 'INTERECONOMIA'
SID 0134: name 'esRadio', provider_name 'esRadio'
SID 0135: name 'Radio Intereconomía', provider_name 'INTERECONOMIA'
SID 0136: name 'Radio Inter', provider_name 'INTERECONOMIA'
SID 012d: name 'Disney Channel', provider_name 'Disney Channel'
got pmt -1
got nit, err -1
channel done!
(0)tune
OURSTATE: tuning
[SEC] startTuneTimeout 5000
[SEC] setVoltage 0
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
(0)fe event: status 1f, inversion off, m_tuning 2
OURSTATE: ok
got pat
got pmt -2
got sdt 0
SDT:
ONID: 22d4
SID 008c: name 'ANTENA 3', provider_name 'ANTENA3 TELEVISION'
SID 008d: name 'NEOX', provider_name 'ANTENA3 TELEVISION'
SID 008e: name 'NOVA', provider_name 'ANTENA3 TELEVISION'
SID 0105: name 'Discovery MAX', provider_name 'Discovery MAX'
SID 0106: name 'AXN', provider_name 'AXN'
SID 010d: name 'GUIDE PLUS+', provider_name 'Rovi Corporation'
SID 010f: name 'RADIO MARCA', provider_name 'VEO TELEVISION'
SID 0111: name 'Vaughan Radio', provider_name 'Vaughan Radio'
got pmt -1
got nit, err -1
channel done!
no channels left to scan.
8 channels scanned, 95 were unavailable.
8 channels in database.
Renumbering...
---- saving lame channel db
saved 242 channels and 6682 services!
scan done!
opening frontend 1
frontend successfully opened
allocate demux
(1)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 1 Freq 10729000 Pol 1 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0
tuning to 979 mhz
OURSTATE: tuning
-------
getResolvedKey config.plugins.crashlogautosubmit.sendAnonCrashlog failed !! (Typo??)
getResolvedKey config.plugins.crashlogautosubmit.addNetwork failed !! (Typo??)
getResolvedKey config.plugins.crashlogautosubmit.addWlan failed !! (Typo??)
]]>
</enigma2crashlog>
</crashlogs>
</HDMU>


After this error it restarts. Then I get the question to start installing the network again and pressing OK immediately gives me:


<?xml version="1.0" encoding="utf-8"?>
<HDMU>
<enigma2>
<crashdate>Sat Jan 1 09:34:33 2000</crashdate>
<compiledate>Jul 29 2013</compiledate>
<skin>skin.xml</skin>
<sourcedate>2013-05-28</sourcedate>
<rev>
<![CDATA[
-----====== HDMU 11199 enigma2 Git 5515 ======-----
]]>
</rev>
<freespace>
<![CDATA[
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/root 121856 50432 71424 41% /
tmpfs 58604 0 58604 0% /ram
/dev/root 121856 50432 71424 41% /dev.static
tmpfs 58604 0 58604 0% /dev
tmpfs 58604 0 58604 0% /dev/shm
tmpfs 58604 4 58600 0% /tmp
]]>
</freespace>
<freeram>
<![CDATA[
total used free shared buffers
Mem: 117208 66196 51012 0 0
-/+ buffers: 66196 51012
Swap: 0 0 0
]]>
</freeram>
<version>3.0.0</version>
</enigma2>
<image>
<stbmodel>spark7162</stbmodel>
<kernelversion>
<![CDATA[
Linux SPARK7162 2.6.32.59_stm24_0211 #1 PREEMPT Mon Jul 29 15:49:17 CEST 2013 sh4 GNU/Linux
]]>
</kernelversion>
<kernelcmdline>console=ttyAS1,115200 rw root=/dev/mtdblock6 rootfstype=jffs2 init=/bin/devinit coprocessor_mem=4m@0x40000000,4m@0x40400000 printk=1 ip=172.100.100.249:172.100.100.174:172.100.100.174 :255.255.0.0:Enigma2:eth0:off stmmaceth=msglvl:0,phyaddr:2,watchdog:5000 nwhwconf=device:eth0,hwaddr:30:00:07:00:0B:CD Manufacture=Spark-Project STB_ID=0C:00:07:00:00:0B:CD</kernelcmdline>
<nimsockets>NIM Socket 0:</nimsockets>
<imageversion>
<![CDATA[
version=0350200905300000
]]>
</imageversion>
<imageissue>
<!-- No such file or directory -->
</imageissue>
</image>
<crashlogs>
<enigma2crashlog>
<![CDATA[
+ (1) Background File Eraser
+ (5) Tuxtxt
+ (8) graphics acceleration manager
STMFB accel interface available

+ (9) GFBDC
15360k total video mem
7260k usable video mem
5640kB available for acceleration surfaces.
resolution: 720 x 576 x 32 (stride: 2880)
+ (9) gLCDDC
eDBoxLCD::eDBoxLCD >
Error loading config file!

LCD resolution: -1 x -1 x -438444568 (stride: 1128547395)
+ (9) Font Render Class
[FONT] initializing lib...
[FONT] loading fonts...
[FONT] Intializing font cache, using max. 4MB...
+ (10) gRC
RC thread created successfully
+ (15) eWindowStyleManager
+ (20) DVB-CI UI
+ (20) RC Input layer
+ (20) misc options
+ (20) AVSwitch Driver
couldnt open /dev/dbox/fp0 to monitor vcr scart slow blanking changed!
+ (21) input device driver
Input device "fulan front panel buttons" is a remotecontrol
Input device "TDT RC event driver" is a remotecontrol
failed to open /dev/input/event2
Input device "" is a mouse
failed to open /dev/input/event3
Input device "" is a remotecontrol
Found 4 input devices.
+ (22) Hdmi CEC driver
+ (30) eActionMap
+ (35) CI Slots
scanning for common interfaces..
eDVBCIInterfaces->setInputSource(0, 0)
eDVBCIInterfaces->setInputSource(1, 1)
done, found 0 common interface slots
+ (35) CA handler
+ (36) Stream server
[SERVERSOCKET] ERROR on bind() (Address already in use)
+ (40) eServiceCenter
settings instance.
+ (41) eServiceFactoryDVD
+ (41) eServiceFactoryM2TS
+ (41) eServiceFactoryMP3
+ (41) eServiceFactoryFS
+ (41) eServiceFactoryDVB
reached rl 70
---- opening lame channel db
reading services (version 4)
loaded 6682 services
scanning for frontends..
opening frontend 0
frontend successfully opened
close frontend 0
opening frontend 1
frontend successfully opened
close frontend 1
opening frontend 2
frontend successfully opened
close frontend 2
found 1 adapter, 3 frontends(3 sim) and 4 demux, boxtype 29
RTC not ready... wait for transponder time
[EPGC] Initialized EPGCache (wait for setCacheFile call now)
Loading spinners...
[ePNG] couldn't open /usr/local/share/enigma2/skin_default/spinner/wait13.png
found 12 spinner!

setIoPrio best-effort level 3 ok
main thread is non-idle! display spinner!
Failed to open /dev/dbox/fp0
[Harddisk] enumerating block devices...
new Harddisk sda -> /dev/sda -> /dev/sda
Reading satellites.xml
Reading terrestrial.xml
sec config cleared
setSlotInfo for dvb frontend 0 to slotid 0, descr Tuner3-T(T/C), need rotorworkaround No, enabled Yes, DVB-S2 No
setSlotInfo for dvb frontend 1 to slotid 1, descr Tuner1-Sat, need rotorworkaround No, enabled Yes, DVB-S2 Yes
setSlotInfo for dvb frontend 2 to slotid 2, descr Tuner2-Sat, need rotorworkaround No, enabled Yes, DVB-S2 Yes
slot: 1 configmode: simple
diseqcmode: diseqc_a_b_c_d
slot: 2 configmode: simple
diseqcmode: diseqc_a_b_c_d
sec config completed
[InfoBar] Failed to load resumepoints: [Errno 2] No such file or directory: '/etc/enigma2/resumepoints.pkl'
loading bouquet... /etc/enigma2/bouquets.tv 1
loading bouquet... /etc/enigma2/userbouquet.mein_tv.tv 1
45 entries in Bouquet userbouquet.mein_tv.tv
loading bouquet... /etc/enigma2/userbouquet.hdtv.tv 46
35 entries in Bouquet userbouquet.hdtv.tv
loading bouquet... /etc/enigma2/userbouquet.sky_hdtv.tv 81
18 entries in Bouquet userbouquet.sky_hdtv.tv
loading bouquet... /etc/enigma2/userbouquet.sky_cinema.tv 99
10 entries in Bouquet userbouquet.sky_cinema.tv
loading bouquet... /etc/enigma2/userbouquet.sky__welt___extra.tv 109
36 entries in Bouquet userbouquet.sky__welt___extra.tv
loading bouquet... /etc/enigma2/userbouquet.sky_bundesliga.tv 145
20 entries in Bouquet userbouquet.sky_bundesliga.tv
loading bouquet... /etc/enigma2/userbouquet.sky_sport.tv 165
29 entries in Bouquet userbouquet.sky_sport.tv
loading bouquet... /etc/enigma2/userbouquet.austriasat.tv 194
13 entries in Bouquet userbouquet.austriasat.tv
loading bouquet... /etc/enigma2/userbouquet.kinder.tv 207
12 entries in Bouquet userbouquet.kinder.tv
loading bouquet... /etc/enigma2/userbouquet.musik.tv 219
16 entries in Bouquet userbouquet.musik.tv
loading bouquet... /etc/enigma2/userbouquet.oesterreich.tv 235
27 entries in Bouquet userbouquet.oesterreich.tv
loading bouquet... /etc/enigma2/userbouquet.italien.tv 262
89 entries in Bouquet userbouquet.italien.tv
loading bouquet... /etc/enigma2/userbouquet.schweiz.tv 351
20 entries in Bouquet userbouquet.schweiz.tv
loading bouquet... /etc/enigma2/userbouquet.holland.tv 371
23 entries in Bouquet userbouquet.holland.tv
loading bouquet... /etc/enigma2/userbouquet.sky_select.tv 394
14 entries in Bouquet userbouquet.sky_select.tv
loading bouquet... /etc/enigma2/userbouquet.xxx.tv 408
47 entries in Bouquet userbouquet.xxx.tv
loading bouquet... /etc/enigma2/userbouquet.favourites.tv 455
0 entries in Bouquet userbouquet.favourites.tv
loading bouquet... /etc/enigma2/userbouquet.LastScanned.tv 455
51 entries in Bouquet userbouquet.LastScanned.tv
18 entries in Bouquet bouquets.tv
loading bouquet... /etc/enigma2/bouquets.radio 1
loading bouquet... /etc/enigma2/userbouquet.deutsche.radio 1
19 entries in Bouquet userbouquet.deutsche.radio
loading bouquet... /etc/enigma2/userbouquet.favourites.radio 20
0 entries in Bouquet userbouquet.favourites.radio
2 entries in Bouquet bouquets.radio
[FONT] adding font /usr/local/share/fonts/nmsbd.ttf...OK (Regular)
[FONT] adding font /usr/local/share/fonts/andale.ttf...OK (Fixed)
[FONT] adding font /usr/local/share/fonts/goodtime.ttf...OK (Crs)
[FONT] adding font /usr/local/share/fonts/age.ttf...OK (Age)
[FONT] adding font /usr/local/share/fonts/tuxtxt.ttf...OK (Console)
[FONT] adding font /usr/local/share/fonts/time.ttf...OK (BMCTime)
[FONT] adding font /usr/local/share/fonts/ae_AlMateen.ttf...OK (Replacement)
3660kB available for acceleration surfaces.
resolution: 1280 x 720 x 32 (stride: 5120)
[FONT] adding font /usr/share/fonts/md_khmurabi_10.ttf...OK (Regular)
[FONT] adding font /usr/share/fonts/valis_lcd.ttf...OK (Digital)
[FONT] adding font /usr/local/share/fonts/valis_enigma.ttf...OK (Subs)
[FONT] adding font /usr/local/share/fonts/nmsbd.ttf...OK (FdLcD)
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse3' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse2' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse1' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse0' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/event3' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/event2' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 22] Invalid argument >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 22] Invalid argument >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mice' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js3' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js2' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js1' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js0' >
Selected keymap does not exist!
Activating language English
[ePopen] command: ip -o addr show dev eth0
eDBoxLCD::getInstance
loadSkin: Screen already defined elsewhere: HDMU_MainMenu
loadSkin: Screen already defined elsewhere: HDMU_SoftcamControl
loadSkin: Screen already defined elsewhere: HDMU_OverclockControl
loadSkin: Screen already defined elsewhere: HDMU_SystemControl
loadSkin: Screen already defined elsewhere: HDMU_SystemInfos
loadSkin: Screen already defined elsewhere: HDMU_ufsup
loadSkin: Screen already defined elsewhere: HDMU_OSDControl
loadSkin: Screen already defined elsewhere: HDMU_VFDControl
loadSkin: Screen already defined elsewhere: HDMU_VideoControl
loadSkin: Screen already defined elsewhere: HDMU_DLNAServer
loadSkin: Screen already defined elsewhere: HDMU_OpenVPN
loadSkin: Screen already defined elsewhere: HDMU_SkinControl
[WebInterface] set language to en
[WebInterface] set language to en
[WebInterface] fallback to default translation for Webinterface
[WebInterface] fallback to default translation for Configuration for the Webinterface
[eSocketMMIHandler] created successfully
getModeList for port Component
getModeList for port Scart
getModeList for port HDMI
getModeList for port HDMI-PC
hotplug on dvi
-> setting aspect, policy, policy2, wss any bestfit policy auto
-> setting aspect, policy, policy2, wss any bestfit policy auto
-> setting aspect, policy, policy2, wss any bestfit policy auto
-> setting aspect, policy, policy2, wss any bestfit policy auto
setMode - port: HDMI mode: 1080p rate: 50Hz
-> setting aspect, policy, policy2, wss any bestfit policy auto
updateColor: HDMI
LINE # automatically generated by enigma 2
LINE
[AutoMount.py] self.automounts without mounts {}
[NetworkBrowser] fallback to default translation for NetworkBrowser
[NetworkBrowser] fallback to default translation for Search for network shares
[NetworkBrowser] fallback to default translation for MountManager
[NetworkBrowser] fallback to default translation for Manage network shares
starting hotplug handler
adding Resource DiseqcTester
resources: {'DiseqcTester': <function DiseqcTesterMain at 0x157617c>}
self.input oscam8765libusb
[Toplevel.importExternalModules] Imported external module: Example
[HTTPRootResource}.__init__
[Webinterface] started on 0.0.0.0:80 auth=False ssl=False
[WebInterface.registerBonjourService] No module named Bonjour.Bonjour
[HTTPRootResource}.__init__
[Webinterface] started on 0.0.0.0:443 auth=True ssl=True
[WebInterface.registerBonjourService] No module named Bonjour.Bonjour
[EPGC] setCacheFile read/write epg data from/to '/hdd/epg.dat'
Reading ['/usr/lib/enigma2/python/Plugins/SystemPlugins/NetworkWizard/networkwizard.xml']
getStepWithID: start
result: nothing
('en_EN', ('English', 'en', 'EN'))
warning, skin is missing element HelpWindow in <class 'Plugins.SystemPlugins.NetworkWizard.NetworkWizard .NetworkWizard'>
WizardCreateSummary
Updating values in step 1
set LCD text
wizard step: {'code': u'self.clearSelectedKeys()\nself.selectKey("OK")', 'text': 'Welcome.\n\nIf you want to connect your receiver to the Internet, this wizard will guide you through the basic network setup of your receiver.\n\nPress OK to start configuring your network', 'displaytext': 'Network wizard', 'id': 'welcome', 'condition': '', 'timeoutaction': 'nextpage', 'nextstep': None, 'code_async': '', 'codeafter_async': u'self.selectInterface()', 'timeoutstep': '', 'list': [], 'timeout': None, 'codeafter': '', 'config': {'screen': None, 'args': None, 'type': ''}}
wizard text Welcome.

If you want to connect your receiver to the Internet, this wizard will guide you through the basic network setup of your receiver.

Press OK to start configuring your network
set LCD text
code self.clearSelectedKeys()
self.selectKey("OK")
selectPic: arrowdown
showing list, 1
self.list: <Components.Sources.List.List object at 0x16b1fcc>
self.list: <Components.Sources.List.List object at 0x16b1fcc>
self.list: <Components.Sources.List.List object at 0x16b1fcc>
self.list: <Components.Sources.List.List object at 0x16b1fcc>
self.list: <Components.Sources.List.List object at 0x16b1fcc>
self.list: <Components.Sources.List.List object at 0x16b1fcc>
setZPosition
showing config
setPixmapNum(1) failed! defined pixmaps: [<enigma.gPixmapPtr; proxy of <Swig Object of type 'ePtr< gPixmap > *' at 0x16ca230> >]
setValue 50
Setvolume: 50 50 (raw)
Setvolume: 32 32 (-1db)
child has terminated
pipes closed
[ePopen] command: route -n | grep eth0
poll: unhandled POLLERR/HUP/NVAL for fd 29(16)
child has terminated
pipes closed
192.168
0.0.0.0
nameservers: [[80, 58, 61, 250], [80, 58, 61, 254]]
read configured interface: {'lo': {'dhcp': False}, 'wlan0': {'dhcp': True}, 'eth0': {'dhcp': True}}
self.ifaces after loading: {'eth0': {'preup': False, 'predown': False, 'ip': [192, 168, 1, 105], 'up': True, 'mac': '30:00:07:00:0b:cd', 'dhcp': True, 'bcast': [192, 168, 1, 255], 'netmask': [255, 255, 255, 0], 'gateway': [192, 168, 1, 1]}}
poll: unhandled POLLERR/HUP/NVAL for fd 34(16)
OK
finished
code self.selectInterface()
Traceback (most recent call last):
File "usr/lib/enigma2/python/Components/ActionMap.py", line 66, in action
File "usr/lib/enigma2/python/Components/ActionMap.py", line 46, in action
File "usr/lib/enigma2/python/Screens/Wizard.py", line 382, in ok
File "usr/lib/enigma2/python/Screens/Wizard.py", line 351, in finished
File "usr/lib/enigma2/python/Screens/Wizard.py", line 463, in runCode
File "<string>", line 1, in <module>
File "usr/lib/enigma2/python/Plugins/SystemPlugins/NetworkWizard/NetworkWizard.py", line 108, in selectInterface
File "usr/lib/enigma2/python/Components/Network.py", line 609, in isWirelessInterface
File "usr/lib/enigma2/python/Components/Network.py", line 603, in sysfsPath
TypeError: cannot concatenate 'str' and 'NoneType' objects
(PyObject_CallObject(<bound method NumberActionMap.action of <Components.ActionMap.NumberActionMap instance at 0x16b808c>>,('WizardActions', 'ok')) failed)
getResolvedKey config.plugins.crashlogautosubmit.sendAnonCrashlog failed !! (Typo??)
getResolvedKey config.plugins.crashlogautosubmit.addNetwork failed !! (Typo??)
getResolvedKey config.plugins.crashlogautosubmit.addWlan failed !! (Typo??)
]]>
</enigma2crashlog>
</crashlogs>
</HDMU>

I hope someone knows how to fix this. thx a lot

TheChip
12.08.2013, 10:37
Do you scan for channels in the first installation wizzard? If you do so, please try not to scan and do this after installation separately from the menu.

dvbdvb
12.08.2013, 21:19
That seems to help.

looks like to be an error in the network section. when I select that the box also crashes.

I was able to scan for channels. However one transponder does not work while using the default firmware it works without any problems. Any idea what might cause that and how to fix it?

thx

TheChip
12.08.2013, 21:34
With wich sat you have problems? I only can use Astra 19.2 and have no Problems with scan on three different boxes.

dvbdvb
12.08.2013, 23:10
on the 23.5 on this transponder: http://en.kingofsat.net/tp.php?tp=1159

The vertical transponders work properly on that satellite. But what I think is so strange is that if I boot to the default firmware it works fine so then the hardware is working fine I suppose.

Any suggestions? When I do a manual scan on the specific transponder it finds nothing at all.