Atemio 7500 neustes Image mit Fehler

[Prince3k]

So, habe mich getraut von titan aus mal die hdmu zu testen und leider gibt es gleich bei der Einstellung der Grundeinstellungen ein großes Problem.
Bei der Netzwerkeinrichtung schmiert der Receiver mit log ab.
Wenn ich das umgehe und aus dem Menü heraus mache, passiert genau das Selbe.
Da in der vorigen Image die Plugins nicht gehen, kann ich aktuell nicht viel machen.
Bitte deshalb um schnellen Fix.

[ReWard]

.....Bei der Netzwerkeinrichtung schmiert der Receiver mit log ab.
Und wo ist das log?

....Bitte deshalb um schnellen Fix.
Klar, ohne log hilft Glaskugelfix.

[Prince3k]

Ein Fehler vom schnellen Wechsel vom Bootloader 6.0 auf 5.04 ist dieser, wenn ich hiernach das neuste HDMU Image eingespielt habe.



FrTs


Unknown command 'bootmenu' - try 'help'
PDK7105>


Hiernach hilft nur das Installieren des Original uboot 1.1.2 über den ART 2.0, dann startet das Image.

Den Fehler, den ich meine, habe ich nun geloggt.




#Log file from Morlys SH4 STB Admin Tool from: So Sep 29 2013, 14:40:40
timeoutCounter: 11
timeoutCounter: 10
timeoutCounter: 9
timeoutCounter: 8
timeoutCounter: 7
KEY: 6C - DOWN
**** 40302 1 ****
[SEM] UP
KEY_PRESS - 6c 1
++++ 0 ms ++++
self.selection: HDMI
input selection moved: HDMI
inputSelect: HDMI
getModeList for port HDMI
modeList: [('720p', ['50Hz', '60Hz']), ('1080p', ['60Hz', '50Hz', '23Hz', '30Hz', '29Hz', '24Hz', '25Hz']), ('1080i', ['50Hz', '60Hz']), ('576p', ['50Hz']), ('576i', ['50Hz'])]
modes for port HDMI and mode 720p
getModeList for port HDMI
('720p', ['50Hz', '60Hz'])
('1080p', ['60Hz', '50Hz', '23Hz', '30Hz', '29Hz', '24Hz', '25Hz'])
('1080i', ['50Hz', '60Hz'])
('576p', ['50Hz'])
('576i', ['50Hz'])
setMode - port: HDMI mode: 720p rate: 50Hz
writing initial videomode to /etc/videomode failed.
-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
updateColor: HDMI
self.selection: HDMI
input selection moved: HDMI
inputSelect: HDMI
KEY: 6C - DOWN
**** 55 1 ****
getModeList for port HDMI
modeList: [('720p', ['50Hz', '60Hz']), ('1080p', ['60Hz', '50Hz', '23Hz', '30Hz', '29Hz', '24Hz', '25Hz']), ('1080i', ['50Hz', '60Hz']), ('576p', ['50Hz']), ('576i', ['50Hz'])]
modes for port HDMI and mode 720p
getModeList for port HDMI
('720p', ['50Hz', '60Hz'])
('1080p', ['60Hz', '50Hz', '23Hz', '30Hz', '29Hz', '24Hz', '25Hz'])
('1080i', ['50Hz', '60Hz'])
('576p', ['50Hz'])
('576i', ['50Hz'])
setMode - port: HDMI mode: 720p rate: 50Hz
writing initial videomode to /etc/videomode failed.
-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
updateColor: HDMI
self.selection: HDMI
input selection moved: HDMI
inputSelect: HDMI
getModeList for port HDMI
modeList: [('720p', ['50Hz', '60Hz']), ('1080p', ['60Hz', '50Hz', '23Hz', '30Hz', '29Hz', '24Hz', '25Hz']), ('1080i', ['50Hz', '60Hz']), ('576p', ['50Hz']), ('576i', ['50Hz'])]
modes for port HDMI and mode 720p
getModeList for port HDMI
('720p', ['50Hz', '60Hz'])
('1080p', ['60Hz', '50Hz', '23Hz', '30Hz', '29Hz', '24Hz', '25Hz'])
('1080i', ['50Hz', '60Hz'])
('576p', ['50Hz'])
('576i', ['50Hz'])
setMode - port: HDMI mode: 720p rate: 50Hz
writing initial videomode to /etc/videomode failed.
-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
updateColor: HDMI
current: ('HDMI', 'HDMI')
input selection moved: HDMI
inputSelect: ++++ 75 ms ++++
HDMI
getModeList for port HDMI
modeList: [('720p', ['50Hz', '60Hz']), ('1080p', ['60Hz', '50Hz', '23Hz', '30Hz', '29Hz', '24Hz', '25Hz']), ('1080i', ['50Hz', '60Hz']), ('576p', ['50Hz']), ('576i', ['50Hz'])]
modes for port HDMI and mode 720p
getModeList for port HDMI
('720p', ['50Hz', '60Hz'])
('1080p', ['60Hz', '50Hz', '23Hz', '30Hz', '29Hz', '24Hz', '25Hz'])
('1080i', ['50Hz', '60Hz'])
('576p', ['50Hz'])
('576i', ['50Hz'])
setMode - port: HDMI mode: 720p rate: 50Hz
writing initial videomode to /etc/videomode failed.
-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
updateColor: HDMI
down
KEY_RELEASE - 6c 00 1 1 CAUSE=Timeout
---- 132 ms ----
[SEM] DOWN
KEY: 160 - OK
**** 870 1 ****
[SEM] UP
KEY_PRESS - 160 1
++++ 0 ms ++++
OK
finished
current: ('HDMI', 'HDMI')
inputSelectionMade: HDMI
inputSelect: HDMI
getModeList for port HDMI
modeList: [('720p', ['50Hz', '60Hz']), ('1080p', ['60Hz', '50Hz', '23Hz', '30Hz', '29Hz', '24Hz', '25Hz']), ('1080i', ['50Hz', '60Hz']), ('576p', ['50Hz']), ('576i', ['50Hz'])]
modes for port HDMI and mode 720p
getModeList for port HDMI
('720p', ['50Hz', '60Hz'])
('1080p', ['60Hz', '50Hz', '23Hz', '30Hz', '29Hz', '24Hz', '25Hz'])
('1080i', ['50Hz', '60Hz'])
('576p', ['50Hz'])
('576i', ['50Hz'])
setMode - port: HDMI mode: 720p rate: 50Hz
writing initial videomode to /etc/videomode failed.
-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
updateColor: HDMI
getStepWithID: modeselection
result: 1
Updating values in step 2
set LCD text
wizard step: {'code': u'self.clearSelectedKeys()\nself.selectKey("UP")\nself.selectKey("DOWN")\nself["portpic"].hide()', 'text': 'Video mode selection.', 'displaytext': 'Select video mode', 'id': 'modeselection', 'condition': '', 'listevaluation': u'modeSelectionMade', 'timeoutaction': 'selectnext', 'nextstep': 'rateselection', 'code_async': '', 'codeafter_async': '', 'timeoutstep': '', 'list': [], 'onselect': u'modeSelectionMoved', 'dynamiclist': u'listModes', 'timeout': 20, 'codeafter': '', 'config': {'screen': None, 'args': None, 'type': ''}}
wizard text Video mode selection.
set LCD text
codeKEY: 160 - OK
self.clearSelectedKeys()
self.selectKey("UP")
self.selectKey("DOWN")
self["portpic"].hide()
**** 53 1 ****
selectPic: arrowdown
selectPic: arrowup
showing list, 2
self.list: <Components.Sources.List.List object at 0x161532c>
self.list: <Components.Sources.List.List object at 0x161532c>
self.list: <Components.Sources.List.List object at 0x161532c>
self.list: <Components.Sources.List.List object at 0x161532c>
self.list: <Components.Sources.List.List object at 0x161532c>
self.list: <Components.Sources.List.List object at 0x161532c>
setZPosition
dynamic list, calling listModes
modes for port HDMI
getModeList for port HDMI
modeslist: [('720p', '720p'), ('1080p', '1080p'), ('1080i', '1080i'), ('576p', '576p'), ('576i', '576i')]
self.selection: 1080p
mode selection moved: 1080p
modes for port HDMI and mode 1080p
getModeList for port HDMI
('720p', ['50Hz', '60Hz'])
('1080p', ['60Hz', '50Hz', '23Hz', '30Hz', '29Hz', '24Hz', '25Hz'])
('1080i', ['50Hz', '60Hz'])
('576p', ['50Hz'])
('576i', ['50Hz'])
ratesList: [('60Hz', '60Hz'), ('50Hz', '50Hz'), ('23Hz', '23Hz'), ('30Hz', '30Hz'), ('29Hz', '29Hz'), ('24Hz', '24Hz'), ('25Hz', '25Hz')]
setMode - port: HDMI mode: 1080p rate: 60Hz
++++ 80 ms ++++
KEY_RELEASE - 160 00 1 1 CAUSE=Timeout
---- 132 ms ----
[SEM] DOWN
writing initial videomode to /etc/videomode failed.
-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
updateColor: HDMI
self.selection: 1080p
mode selection moved: 1080p
modes for port HDMI and mode 1080p
getModeList for port HDMI
('720p', ['50Hz', '60Hz'])
('1080p', ['60Hz', '50Hz', '23Hz', '30Hz', '29Hz', '24Hz', '25Hz'])
('1080i', ['50Hz', '60Hz'])
('576p', ['50Hz'])
('576i', ['50Hz'])
ratesList: [('60Hz', '60Hz'), ('50Hz', '50Hz'), ('23Hz', '23Hz'), ('30Hz', '30Hz'), ('29Hz', '29Hz'), ('24Hz', '24Hz'), ('25Hz', '25Hz')]
setMode - port: HDMI mode: 1080p rate: 60Hz
writing initial videomode to /etc/videomode failed.
-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
updateColor: HDMI
self.selection: 720p
mode selection moved: 720p
modes for port HDMI and mode 720p
getModeList for port HDMI
('720p', ['50Hz', '60Hz'])
('1080p', ['60Hz', '50Hz', '23Hz', '30Hz', '29Hz', '24Hz', '25Hz'])
('1080i', ['50Hz', '60Hz'])
('576p', ['50Hz'])
('576i', ['50Hz'])
ratesList: [('50Hz', '50Hz'), ('60Hz', '60Hz')]
setMode - port: HDMI mode: 720p rate: 50Hz
writing initial videomode to /etc/videomode failed.
-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
updateColor: HDMI
showing config
Now: 2
Now: 2
********** end showiframe
VIDEO_SELECT_SOURCE DEMUX (Invalid argument)
timeoutCounter: 19
timeoutCounter: 18
KEY: 6C - DOWN
**** 2751 1 ****
[SEM] UP
KEY_PRESS - 6c 1
++++ 0 ms ++++
self.selection: 1080p
mode selection moved: 1080p
modes for port HDMI and mode 1080p
getModeList for port HDMI
('720p', ['50Hz', '60Hz'])
('1080p', ['60Hz', '50Hz', '23Hz', '30Hz', '29Hz', '24Hz', '25Hz'])
('1080i', ['50Hz', '60Hz'])
('576p', ['50Hz'])
('576i', ['50Hz'])
ratesList: [('60Hz', '60Hz'), ('50Hz', '50Hz'), ('23Hz', '23Hz'), ('30Hz', '30Hz'), ('29Hz', '29Hz'), ('24Hz', '24Hz'), ('25Hz', '25Hz')]
setMode - port: HDMI mode: 1080p rate: 60Hz
KEY: 6C - DOWN
**** 56 1 ****
writing initial videomode to /etc/videomode failed.
-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
updateColor: HDMI
++++ 75 ms ++++
self.selection: 1080p
mode selection moved: 1080p
modes for port HDMI and mode 1080p
getModeList for port HDMI
('720p', ['50Hz', '60Hz'])
('1080p', ['60Hz', '50Hz', '23Hz', '30Hz', '29Hz', '24Hz', '25Hz'])
('1080i', ['50Hz', '60Hz'])
('576p', ['50Hz'])
('576i', ['50Hz'])
ratesList: [('60Hz', '60Hz'), ('50Hz', '50Hz'), ('23Hz', '23Hz'), ('30Hz', '30Hz'), ('29Hz', '29Hz'), ('24Hz', '24Hz'), ('25Hz', '25Hz')]
setMode - port: HDMI mode: 1080p rate: 60Hz
writing initial videomode to /etc/videomode failed.
-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
updateColor: HDMI
self.selection: 1080p
mode selection moved: 1080p
modes for port HDMI and mode 1080p
getModeList for port HDMI
('720p', ['50Hz', '60Hz'])
('1080p', ['60Hz', '50Hz', '23Hz', '30Hz', '29Hz', '24Hz', '25Hz'])
KEY_RELEASE - 6c 00 1 1 CAUSE=Timeout
---- 132 ms ----
[SEM] DOWN
('1080i', ['50Hz', '60Hz'])
('576p', ['50Hz'])
('576i', ['50Hz'])
ratesList: [('60Hz', '60Hz'), ('50Hz', '50Hz'), ('23Hz', '23Hz'), ('30Hz', '30Hz'), ('29Hz', '29Hz'), ('24Hz', '24Hz'), ('25Hz', '25Hz')]
setMode - port: HDMI mode: 1080p rate: 60Hz
writing initial videomode to /etc/videomode failed.
-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
updateColor: HDMI
current: ('1080p', '1080p')
mode selection moved: 1080p
modes for port HDMI and mode 1080p
getModeList for port HDMI
('720p', ['50Hz', '60Hz'])
('1080p', ['60Hz', '50Hz', '23Hz', '30Hz', '29Hz', '24Hz', '25Hz'])
('1080i', ['50Hz', '60Hz'])
('576p', ['50Hz'])
('576i', ['50Hz'])
ratesList: [('60Hz', '60Hz'), ('50Hz', '50Hz'), ('23Hz', '23Hz'), ('30Hz', '30Hz'), ('29Hz', '29Hz'), ('24Hz', '24Hz'), ('25Hz', '25Hz')]
setMode - port: HDMI mode: 1080p rate: 60Hz
writing initial videomode to /etc/videomode failed.
-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
updateColor: HDMI
down
timeoutCounter: 19
KEY: 6C - DOWN
**** 360 1 ****
[SEM] UP
KEY_PRESS - 6c 1
++++ 0 ms ++++
self.selection: 1080i
mode selection moved: 1080i
modes for port HDMI and mode 1080i
getModeList for port HDMI
('720p', ['50Hz', '60Hz'])
('1080p', ['60Hz', '50Hz', '23Hz', '30Hz', '29Hz', '24Hz', '25Hz'])
('1080i', ['50Hz', '60Hz'])
('576p', ['50Hz'])
('576i', ['50Hz'])
ratesList: [('50Hz', '50Hz'), ('60Hz', '60Hz')]
setMode - port: HDMI mode: 1080i rate: 50Hz
KEY: 6C - DOWN
**** 55 1 ****
writing initial videomode to /etc/videomode failed.
-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
updateColor: HDMI
self.selection: 1080i
mode selection moved: 1080i
modes for port HDMI ++++ 75 ms ++++
and mode 1080i
getModeList for port HDMI
('720p', ['50Hz', '60Hz'])
('1080p', ['60Hz', '50Hz', '23Hz', '30Hz', '29Hz', '24Hz', '25Hz'])
('1080i', ['50Hz', '60Hz'])
('576p', ['50Hz'])
('576i', ['50Hz'])
ratesList: [('50Hz', '50Hz'), ('60Hz', '60Hz')]
setMode - port: HDMI mode: 1080i rate: 50Hz
writing initial videomode to /etc/videomode failed.
-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
updateColor: HDMI
self.selection: 1080i
mode selection moved: 1080i
modes for port HDMI and mode 1080i
getModeList for port HDMI
('720p', ['50Hz', '60Hz'])
('1080p', ['60Hz', '50Hz', '23Hz', '30Hz', '29Hz', '24Hz', '25Hz'])
('1080i', ['50Hz', '60Hz'])
('576p', ['50Hz'])
('576i', ['50Hz'])
ratesList: [('50Hz', '50Hz'), ('60Hz', '60Hz')]
setMode - port: HDMI mode: 1080i rate: 50Hz
KEY_RELEASE - 6c 00 1 1 CAUSE=Timeout
---- 132 ms ----
[SEM] DOWN
writing initial videomode to /etc/videomode failed.
-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
updateColor: HDMI
current: ('1080i', '1080i')
mode selection moved: 1080i
modes for port HDMI and mode 1080i
getModeList for port HDMI
('720p', ['50Hz', '60Hz'])
('1080p', ['60Hz', '50Hz', '23Hz', '30Hz', '29Hz', '24Hz', '25Hz'])
('1080i', ['50Hz', '60Hz'])
('576p', ['50Hz'])
('576i', ['50Hz'])
ratesList: [('50Hz', '50Hz'), ('60Hz', '60Hz')]
setMode - port: HDMI mode: 1080i rate: 50Hz
writing initial videomode to /etc/videomode failed.
-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
updateColor: HDMI
down
timeoutCounter: 19
KEY: 160 - OK
**** 1020 1 ****
[SEM] UP
KEY_PRESS - 160 1
++++ 0 ms ++++
OK
finished
current: ('1080i', '1080i')
modeSelectionMade: 1080i
modes for port HDMI and mode 1080i
getModeList for port HDMI
('720p', ['50Hz', '60Hz'])
('1080p', ['60Hz', '50Hz', '23Hz', '30Hz', '29Hz', '24Hz', '25Hz'])
('1080i', ['50Hz', '60Hz'])
('576p', ['50Hz'])
('576i', ['50Hz'])
ratesList: [('50Hz', '50Hz'), ('60Hz', '60Hz')]
setMode - port: HDMI mode: 1080i rate: 50Hz
writing initial videomode to /etc/videomode failed.
-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
updateColor: HDMI
getStepWithID: rateselection
result: 2
Updating values in step 3
set LCD text
wizard step: {'code': u'self.clearSelectedKeys()\nself.selectKey("UP")\nself.selectKey("DOWN")', 'text': 'Refresh rate selection.', 'displaytext': 'Select refresh rate', 'id': 'rateselection', 'condition': u'self.condition = (self.port != "DVI" or self.mode == "PC")', 'listevaluation': u'rateSelectionMade', 'timeoutaction': 'selectnext', 'nextstep': None, 'code_async': '', 'codeafter_async': '', 'timeoutstep': '', 'list': [], 'onselect': u'rateSelectionMoved', 'dynamiclist': u'listRates', 'timeout': 20, 'codeafter': '', 'config': {'screen': None, 'args': None, 'type': ''}}
wizard text Refresh rate selection.
KEY: 160 - OK
**** 56 1 ****
set LCD text
code self.clearSelectedKeys()
self.selectKey("UP")
self.selectKey("DOWN")
selectPic: arrowdown
selectPic: arrowup
showing list, 3
self.list: <Components.Sources.List.List object at 0x161532c>
self.list: <Components.Sources.List.List object at 0x161532c>
self.list: <Components.Sources.List.List object at 0x161532c>
self.list: <Components.Sources.List.List object at 0x161532c>
self.list: <Components.Sources.List.List object at 0x161532c>
self.list: <Components.Sources.List.List object at 0x161532c>
setZPosition
dynamic list, calling listRates
modes for port HDMI and mode 1080i
getModeList for port HDMI
('720p', ['50Hz', '60Hz'])
('1080p', ['60Hz', '50Hz', '23Hz', '30Hz', '29Hz', '24Hz', '25Hz'])
('1080i', ['50Hz', '60Hz'])
('576p', ['50Hz'])
('576i', ['50Hz'])
self.selection: 60Hz
rate selection moved: 60Hz
setMode - port: HDMI mode: 1080i rate: 60Hz
++++ 75 ms ++++
writing initial videomode to /etc/videomode failed.
KEY_RELEASE - 160 00 1 1 CAUSE=Timeout
---- 132 ms ----
[SEM] DOWN
-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
updateColor: HDMI
self.selection: 60Hz
rate selection moved: 60Hz
setMode - port: HDMI mode: 1080i rate: 60Hz
writing initial videomode to /etc/videomode failed.
-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
updateColor: HDMI
self.selection: 50Hz
rate selection moved: 50Hz
setMode - port: HDMI mode: 1080i rate: 50Hz
writing initial videomode to /etc/videomode failed.
-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
updateColor: HDMI
showing config
Now: 3
Now: 3
KEY: 160 - OK
**** 848 1 ****
[SEM] UP
KEY_PRESS - 160 1
++++ 0 ms ++++
OK
finished
current: ('50Hz', '50Hz')
rateSelectionMade: 50Hz
setMode - port: HDMI mode: 1080i rate: 50Hz
writing initial videomode to /etc/videomode failed.
-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
updateColor: HDMI
wizard finished
saveMode HDMI 1080i 50Hz
KEY: 160 - OK
**** 55 1 ****
Config: Couldn't write /etc/enigma2/settings
Now: 3
[ePNG] couldn't open /usr/local/share/enigma2/countries/ar_AE.png
[ePNG] couldn't open /usr/local/share/enigma2/countries/bg_BG.png
[ePNG] couldn't open /usr/local/share/enigma2/countries/ca_AD.png
[ePNG] couldn't open /usr/local/share/enigma2/countries/cs_CZ.png
[ePNG] couldn't open /usr/local/share/enigma2/countries/da_DK.png
[ePNG] couldn't open /usr/local/share/enigma2/countries/de_DE.png
[ePNG] couldn't open /usr/local/share/enigma2/countries/el_GR.png
[ePNG] couldn't open /usr/local/share/enigma2/countries/en_EN.png
[ePNG] couldn't open /usr/local/share/enigma2/countries/es_ES.png
++++ 75 ms ++++
[ePNG] couldn't open /usr/local/share/enigma2/countries/et_EE.png
[ePNG] couldn't open /usr/local/share/enigma2/countries/fa_IR.png
[ePNG] couldn't open /usr/local/share/enigma2/countries/fi_FI.png
[ePNG] couldn't open /usr/local/share/enigma2/countries/fr_FR.png
[ePNG] couldn't open /usr/local/share/enigma2/countries/he_IL.png
[ePNG] couldn't open /usr/local/share/enigma2/countries/hr_HR.png
[ePNG] couldn't open /usr/local/share/enigma2/countries/hu_HU.png
[ePNG] couldn't open /usr/local/share/enigma2/countries/is_IS.png
[ePNG] couldn't open /usr/local/share/enigma2/countries/it_IT.png
[ePNG] couldn't open /usr/local/share/enigma2/countries/ku_KU.png
KEY_RELEASE - 160 00 1 1 CAUSE=Timeout
---- 131 ms ----
[SEM] DOWN
[ePNG] couldn't open /usr/local/share/enigma2/countries/lt_LT.png
[ePNG] couldn't open /usr/local/share/enigma2/countries/lv_LV.png
[ePNG] couldn't open /usr/local/share/enigma2/countries/nl_NL.png
[ePNG] couldn't open /usr/local/share/enigma2/countries/no_NO.png
[ePNG] couldn't open /usr/local/share/enigma2/countries/pl_PL.png
[ePNG] couldn't open /usr/local/share/enigma2/countries/pt_PT.png
[ePNG] couldn't open /usr/local/share/enigma2/countries/pt_BR.png
[ePNG] couldn't open /usr/local/share/enigma2/countries/ro_RO.png
[ePNG] couldn't open /usr/local/share/enigma2/countries/ru_RU.png
[ePNG] couldn't open /usr/local/share/enigma2/countries/sk_SK.png
[ePNG] couldn't open /usr/local/share/enigma2/countries/sl_SI.png
[ePNG] couldn't open /usr/local/share/enigma2/countries/sr_YU.png
[ePNG] couldn't open /usr/local/share/enigma2/countries/sv_SE.png
[ePNG] couldn't open /usr/local/share/enigma2/countries/th_TH.png
[ePNG] couldn't open /usr/local/share/enigma2/countries/tr_TR.png
[ePNG] couldn't open /usr/local/share/enigma2/countries/uk_UA.png
selectPic: arrowdown
selectPic: arrowup
setPixmapNum(1) failed! defined pixmaps: [<enigma.gPixmapPtr; proxy of <Swig Object of type 'ePtr< gPixmap > *' at 0x16933b0> >]
KEY: 67 - UP
**** 3638 1 ****
[SEM] UP
KEY_PRESS - 67 1
++++ 0 ms ++++
KEY: 67 - UP
**** 53 1 ****
++++ 80 ms ++++
KEY_RELEASE - 67 00 1 1 CAUSE=Timeout
---- 132 ms ----
[SEM] DOWN
KEY: 67 - UP
**** 418 1 ****
[SEM] UP
KEY_PRESS - 67 1
++++ 0 ms ++++
KEY: 67 - UP
**** 53 1 ****
++++ 80 ms ++++
KEY_RELEASE - 67 00 1 1 CAUSE=Timeout
---- 132 ms ----
[SEM] DOWN
KEY: 160 - OK
**** 6698 1 ****
[SEM] UP
KEY_PRESS - 160 1
++++ 0 ms ++++
updating language...
commit language
Activating language Deutsch
KEY: 160 - OK
**** 53 1 ****
++++ 80 ms ++++
KEY_RELEASE - 160 00 1 1 CAUSE=Timeout
---- 132 ms ----
[SEM] DOWN
[WebInterface] set language to de
[WebInterface] set language to de
Reading ['/usr/lib/enigma2/python/Plugins/SystemPlugins/NetworkWizard/networkwizard.xml']
getStepWithID: start
result: nothing
('de_DE', ('Deutsch', 'de', 'DE'))
warning, skin is missing element HelpWindow in <class 'Plugins.SystemPlugins.NetworkWizard.NetworkWizard .NetworkWizard'>
WizardCreateSummary
Updating values in step 1
set LCD text
wizard step: {'code': u'self.clearSelectedKeys()\nself.selectKey("OK")', 'text': 'Welcome.\n\nIf you want to connect your receiver to the Internet, this wizard will guide you through the basic network setup of your receiver.\n\nPress OK to start configuring your network', 'displaytext': 'Network wizard', 'id': 'welcome', 'condition': '', 'timeoutaction': 'nextpage', 'nextstep': None, 'code_async': '', 'codeafter_async': u'self.selectInterface()', 'timeoutstep': '', 'list': [], 'timeout': None, 'codeafter': '', 'config': {'screen': None, 'args': None, 'type': ''}}
wizard text Willkommen.
Wenn Sie Ihren Receiver mit dem Internet verbinden möchten, wird Sie dieser Assistent durch die grundlegenden Netzwerkeinstellungen führen.
Drücken Sie OK, um Ihr Netzwerk zu konfigurieren
set LCD text
code self.clearSelectedKeys()
self.selectKey("OK")
selectPic: arrowdown
showing list, 1
self.list: <Components.Sources.List.List object at 0x177bb0c>
self.list: <Components.Sources.List.List object at 0x177bb0c>
self.list: <Components.Sources.List.List object at 0x177bb0c>
self.list: <Components.Sources.List.List object at 0x177bb0c>
self.list: <Components.Sources.List.List object at 0x177bb0c>
self.list: <Components.Sources.List.List object at 0x177bb0c>
setZPosition
showing config
setPixmapNum(1) failed! defined pixmaps: [<enigma.gPixmapPtr; proxy of <Swig Object of type 'ePtr< gPixmap > *' at 0x179f6b0> >]
KEY: 160 - OK
**** 3966 1 ****
[SEM] UP
KEY_PRESS - 160 1
++++ 0 ms ++++
OK
finished
code self.selectInterface()
getStepWithID: nwconfig
result: 2
Updating values in step 3
set LCD text
wizard step: {'code': u'self.clearSelectedKeys()\nself.selectKey("OK")\nself.selectKey("UP")\nself.selectKey("DOWN")\nself.selectKey("LEFT")\nself.selectKey("RIGHT")', 'text': 'Please configure your internet connection by filling out the required values.\nWhen you are ready press OK to continue.', 'displaytext': 'Configure interface', 'id': 'nwconfig', 'condition': '', 'timeoutaction': 'nextpage', 'nextstep': None, 'code_async': '', 'codeafter_async': u'self.AdapterSetupEnd(self.selectedInterface)', 'timeoutstep': '', 'list': [], 'timeout': None, 'codeafter': '', 'config': {'screen': <class 'Screens.NetworkSetup.AdapterSetup'>, 'args': 'self.selectedInterface', 'type': 'ConfigList'}}
wizard text Konfigurieren Sie Ihr Netzwerk durch Ausfüllen der entsprechenden Werte.
Drücken Sie OK zum Fortfahren
set LCD text
code self.clearSelectedKeys()
self.selectKey("OK")
self.selectKey("UP")
self.selectKey("DOWN")
self.selectKey("LEFT")
self.selectKey("RIGHT")
selectPic: arrowdown
selectPic: arrowdown2
selectPic: arrowup
showing list, 3
self.list: <Components.Sources.List.List object at 0x177bb0c>
self.list: <Components.Sources.List.List object at 0x177bb0c>
self.list: <Components.Sources.List.List object at 0x177bb0c>
self.list: <Components.Sources.List.List object at 0x177bb0c>
self.list: <Components.Sources.List.List object at 0x177bb0c>
self.list: <Components.Sources.List.List object at 0x177bb0c>
setZPosition
KEY: 160 - OK
**** 53 1 ****
showing config
wizard screen <class 'Screens.NetworkSetup.AdapterSetup'>
++++ 80 ms ++++
KEY_RELEASE - 160 00 1 1 CAUSE=Timeout
---- 132 ms ----
[SEM] DOWN
clearConfigList <Components.ConfigList.ConfigList object at 0x17a5d2c> <Components.ConfigList.ConfigList object at 0x177ba8c>
clearConfigList <Components.ConfigList.ConfigList object at 0x177ba8c> <Components.ConfigList.ConfigList object at 0x177ba8c>
Now: 3
Now: 3
KEY: 6A - RIGHT
**** 1442 1 ****
[SEM] UP
KEY_PRESS - 6a 1
++++ 0 ms ++++
right
KEY: 6A - RIGHT
**** 54 1 ****
++++ 75 ms ++++
KEY_RELEASE - 6a 00 1 1 CAUSE=Timeout
---- 132 ms ----
[SEM] DOWN
KEY: 6A - RIGHT
**** 975 1 ****
[SEM] UP
KEY_PRESS - 6a 1
++++ 0 ms ++++
right
KEY: 6A - RIGHT
**** 56 1 ****
++++ 75 ms ++++
KEY_RELEASE - 6a 00 1 1 CAUSE=Timeout
---- 132 ms ----
[SEM] DOWN
KEY: 6C - DOWN
**** 389 1 ****
[SEM] UP
KEY_PRESS - 6c 1
++++ 0 ms ++++
down
KEY: 6C - DOWN
**** 52 1 ****
++++ 81 ms ++++
KEY_RELEASE - 6c 00 1 1 CAUSE=Timeout
---- 133 ms ----
[SEM] DOWN
KEY: 6A - RIGHT
**** 385 1 ****
[SEM] UP
KEY_PRESS - 6a 1
++++ 0 ms ++++
right
KEY: 6A - RIGHT
**** 56 1 ****
++++ 75 ms ++++
KEY_RELEASE - 6a 00 1 1 CAUSE=Timeout
---- 132 ms ----
[SEM] DOWN
KEY: 6C - DOWN
**** 689 1 ****
[SEM] UP
KEY_PRESS - 6c 1
++++ 0 ms ++++
down
KEY: 6C - DOWN
**** 53 1 ****
++++ 77 ms ++++
KEY_RELEASE - 6c 00 1 1 CAUSE=Timeout
---- 133 ms ----
[SEM] DOWN
KEY: 02 - 1BUTTON
**** 1057 1 ****
[SEM] UP
KEY_PRESS - 02 1
++++ 4 ms ++++
KEY: 02 - 1BUTTON
**** 52 1 ****
++++ 79 ms ++++
KEY_RELEASE - 02 00 1 1 CAUSE=Timeout
---- 131 ms ----
[SEM] DOWN
KEY: 0A - 9BUTTON
**** 361 1 ****
[SEM] UP
KEY_PRESS - 0a 1
++++ 0 ms ++++
KEY: 0A - 9BUTTON
**** 54 1 ****
++++ 79 ms ++++
KEY_RELEASE - 0a 00 1 1 CAUSE=Timeout
---- 131 ms ----
[SEM] DOWN
KEY: 03 - 2BUTTON
**** 413 1 ****
[SEM] UP
KEY_PRESS - 03 1
++++ 0 ms ++++
KEY: 03 - 2BUTTON
**** 53 1 ****
++++ 77 ms ++++
KEY_RELEASE - 03 00 1 1 CAUSE=Timeout
---- 133 ms ----
[SEM] DOWN
KEY: 02 - 1BUTTON
**** 361 1 ****
[SEM] UP
KEY_PRESS - 02 1
++++ 0 ms ++++
KEY: 02 - 1BUTTON
**** 52 1 ****
++++ 78 ms ++++
KEY_RELEASE - 02 00 1 1 CAUSE=Timeout
---- 135 ms ----
[SEM] DOWN
KEY: 07 - 6BUTTON
**** 415 1 ****
[SEM] UP
KEY_PRESS - 07 1
++++ 0 ms ++++
KEY: 07 - 6BUTTON
**** 53 1 ****
++++ 78 ms ++++
KEY_RELEASE - 07 00 1 1 CAUSE=Timeout
---- 134 ms ----
[SEM] DOWN
KEY: 09 - 8BUTTON
**** 398 1 ****
[SEM] UP
KEY_PRESS - 09 1
++++ 0 ms ++++
KEY: 09 - 8BUTTON
**** 52 1 ****
++++ 78 ms ++++
KEY_RELEASE - 09 00 1 1 CAUSE=Timeout
---- 134 ms ----
[SEM] DOWN
KEY: 02 - 1BUTTON
**** 448 1 ****
[SEM] UP
KEY_PRESS - 02 1
++++ 0 ms ++++
KEY: 02 - 1BUTTON
**** 52 1 ****
++++ 81 ms ++++
KEY_RELEASE - 02 00 1 1 CAUSE=Timeout
---- 133 ms ----
[SEM] DOWN
KEY: 08 - 7BUTTON
**** 408 1 ****
[SEM] UP
KEY_PRESS - 08 1
++++ 0 ms ++++
KEY: 08 - 7BUTTON
**** 52 1 ****
++++ 80 ms ++++
KEY_RELEASE - 08 00 1 1 CAUSE=Timeout
---- 132 ms ----
[SEM] DOWN
KEY: 09 - 8BUTTON
**** 387 1 ****
[SEM] UP
KEY_PRESS - 09 1
++++ 0 ms ++++
KEY: 09 - 8BUTTON
**** 53 1 ****
++++ 83 ms ++++
KEY_RELEASE - 09 00 1 1 CAUSE=Timeout
---- 131 ms ----
[SEM] DOWN
KEY: 03 - 2BUTTON
**** 1140 1 ****
[SEM] UP
KEY_PRESS - 03 1
++++ 0 ms ++++
KEY: 03 - 2BUTTON
**** 53 1 ****
++++ 77 ms ++++
KEY_RELEASE - 03 00 1 1 CAUSE=Timeout
---- 134 ms ----
[SEM] DOWN
KEY: 0B - 0BUTTON
**** 443 1 ****
[SEM] UP
KEY_PRESS - 0b 1
++++ 0 ms ++++
KEY: 0B - 0BUTTON
**** 52 1 ****
++++ 81 ms ++++
KEY_RELEASE - 0b 00 1 1 CAUSE=Timeout
---- 133 ms ----
[SEM] DOWN
KEY: 6C - DOWN
**** 1254 1 ****
[SEM] UP
KEY_PRESS - 6c 1
++++ 0 ms ++++
down
KEY: 6C - DOWN
**** 53 1 ****
++++ 81 ms ++++
KEY_RELEASE - 6c 00 1 1 CAUSE=Timeout
---- 133 ms ----
[SEM] DOWN
KEY: 03 - 2BUTTON
**** 787 1 ****
[SEM] UP
KEY_PRESS - 03 1
++++ 0 ms ++++
KEY: 03 - 2BUTTON
**** 52 1 ****
++++ 81 ms ++++
KEY_RELEASE - 03 00 1 1 CAUSE=Timeout
---- 133 ms ----
[SEM] DOWN
KEY: 06 - 5BUTTON
**** 360 1 ****
[SEM] UP
KEY_PRESS - 06 1
++++ 0 ms ++++
KEY: 06 - 5BUTTON
**** 53 1 ****
++++ 79 ms ++++
KEY_RELEASE - 06 00 1 1 CAUSE=Timeout
---- 131 ms ----
[SEM] DOWN
KEY: 06 - 5BUTTON
**** 386 1 ****
[SEM] UP
KEY_PRESS - 06 1
++++ 0 ms ++++
KEY: 06 - 5BUTTON
**** 53 1 ****
++++ 79 ms ++++
KEY_RELEASE - 06 00 1 1 CAUSE=Timeout
---- 132 ms ----
[SEM] DOWN
KEY: 03 - 2BUTTON
**** 389 1 ****
[SEM] UP
KEY_PRESS - 03 1
++++ 0 ms ++++
KEY: 03 - 2BUTTON
**** 52 1 ****
++++ 77 ms ++++
KEY_RELEASE - 03 00 1 1 CAUSE=Timeout
---- 134 ms ----
[SEM] DOWN
KEY: 06 - 5BUTTON
**** 395 1 ****
[SEM] UP
KEY_PRESS - 06 1
++++ 0 ms ++++
KEY: 06 - 5BUTTON
**** 53 1 ****
++++ 77 ms ++++
KEY_RELEASE - 06 00 1 1 CAUSE=Timeout
---- 133 ms ----
[SEM] DOWN
KEY: 06 - 5BUTTON
**** 387 1 ****
[SEM] UP
KEY_PRESS - 06 1
++++ 0 ms ++++
KEY: 06 - 5BUTTON
**** 53 1 ****
++++ 77 ms ++++
KEY_RELEASE - 06 00 1 1 CAUSE=Timeout
---- 133 ms ----
[SEM] DOWN
KEY: 03 - 2BUTTON
**** 391 1 ****
[SEM] UP
KEY_PRESS - 03 1
++++ 0 ms ++++
KEY: 03 - 2BUTTON
**** 53 1 ****
++++ 80 ms ++++
KEY_RELEASE - 03 00 1 1 CAUSE=Timeout
---- 132 ms ----
[SEM] DOWN
KEY: 06 - 5BUTTON
**** 387 1 ****
[SEM] UP
KEY_PRESS - 06 1
++++ 0 ms ++++
KEY: 06 - 5BUTTON
**** 53 1 ****
++++ 80 ms ++++
KEY_RELEASE - 06 00 1 1 CAUSE=Timeout
---- 132 ms ----
[SEM] DOWN
KEY: 06 - 5BUTTON
**** 407 1 ****
[SEM] UP
KEY_PRESS - 06 1
++++ 0 ms ++++
KEY: 06 - 5BUTTON
**** 52 1 ****
++++ 79 ms ++++
KEY_RELEASE - 06 00 1 1 CAUSE=Timeout
---- 131 ms ----
[SEM] DOWN
KEY: 6C - DOWN
**** 388 1 ****
[SEM] UP
KEY_PRESS - 6c 1
++++ 0 ms ++++
down
KEY: 6C - DOWN
**** 53 1 ****
++++ 77 ms ++++
KEY_RELEASE - 6c 00 1 1 CAUSE=Timeout
---- 133 ms ----
[SEM] DOWN
KEY: 6C - DOWN
**** 388 1 ****
[SEM] UP
KEY_PRESS - 6c 1
++++ 0 ms ++++
down
KEY: 6C - DOWN
**** 53 1 ****
++++ 80 ms ++++
KEY_RELEASE - 6c 00 1 1 CAUSE=Timeout
---- 132 ms ----
[SEM] DOWN
KEY: 02 - 1BUTTON
**** 725 1 ****
[SEM] UP
KEY_PRESS - 02 1
++++ 0 ms ++++
KEY: 02 - 1BUTTON
**** 53 1 ****
++++ 77 ms ++++
KEY_RELEASE - 02 00 1 1 CAUSE=Timeout
---- 133 ms ----
[SEM] DOWN
KEY: 0A - 9BUTTON
**** 387 1 ****
[SEM] UP
KEY_PRESS - 0a 1
++++ 0 ms ++++
KEY: 0A - 9BUTTON
**** 53 1 ****
++++ 81 ms ++++
KEY_RELEASE - 0a 00 1 1 CAUSE=Timeout
---- 133 ms ----
[SEM] DOWN
KEY: 03 - 2BUTTON
**** 389 1 ****
[SEM] UP
KEY_PRESS - 03 1
++++ 0 ms ++++
KEY: 03 - 2BUTTON
**** 53 1 ****
++++ 79 ms ++++
KEY_RELEASE - 03 00 1 1 CAUSE=Timeout
---- 130 ms ----
[SEM] DOWN
KEY: 02 - 1BUTTON
**** 386 1 ****
[SEM] UP
KEY_PRESS - 02 1
++++ 4 ms ++++
KEY: 02 - 1BUTTON
**** 52 1 ****
++++ 82 ms ++++
KEY_RELEASE - 02 00 1 1 CAUSE=Timeout
---- 131 ms ----
[SEM] DOWN
KEY: 07 - 6BUTTON
**** 387 1 ****
[SEM] UP
KEY_PRESS - 07 1
++++ 0 ms ++++
KEY: 07 - 6BUTTON
**** 56 1 ****
++++ 75 ms ++++
KEY_RELEASE - 07 00 1 1 CAUSE=Timeout
---- 131 ms ----
[SEM] DOWN
KEY: 09 - 8BUTTON
**** 384 1 ****
[SEM] UP
KEY_PRESS - 09 1
++++ 0 ms ++++
KEY: 09 - 8BUTTON
**** 53 1 ****
++++ 78 ms ++++
KEY_RELEASE - 09 00 1 1 CAUSE=Timeout
---- 134 ms ----
[SEM] DOWN
KEY: 02 - 1BUTTON
**** 418 1 ****
[SEM] UP
KEY_PRESS - 02 1
++++ 0 ms ++++
KEY: 02 - 1BUTTON
**** 53 1 ****
++++ 78 ms ++++
KEY_RELEASE - 02 00 1 1 CAUSE=Timeout
---- 134 ms ----
[SEM] DOWN
KEY: 08 - 7BUTTON
**** 390 1 ****
[SEM] UP
KEY_PRESS - 08 1
++++ 0 ms ++++
KEY: 08 - 7BUTTON
**** 53 1 ****
++++ 78 ms ++++
KEY_RELEASE - 08 00 1 1 CAUSE=Timeout
---- 134 ms ----
[SEM] DOWN
KEY: 09 - 8BUTTON
**** 360 1 ****
[SEM] UP
KEY_PRESS - 09 1
++++ 0 ms ++++
KEY: 09 - 8BUTTON
**** 53 1 ****
++++ 80 ms ++++
KEY_RELEASE - 09 00 1 1 CAUSE=Timeout
---- 133 ms ----
[SEM] DOWN
KEY: 02 - 1BUTTON
**** 425 1 ****
[SEM] UP
KEY_PRESS - 02 1
++++ 0 ms ++++
KEY: 02 - 1BUTTON
**** 53 1 ****
++++ 77 ms ++++
KEY_RELEASE - 02 00 1 1 CAUSE=Timeout
---- 134 ms ----
[SEM] DOWN
KEY: 160 - OK
**** 4347 1 ****
[SEM] UP
KEY_PRESS - 160 1
++++ 0 ms ++++
OK
illegal flag wfBorder!
KEY: 160 - OK
**** 54 1 ****
++++ 75 ms ++++
KEY_RELEASE - 160 00 1 1 CAUSE=Timeout
---- 131 ms ----
[SEM] DOWN
KEY: 160 - OK
**** 1796 1 ****
[SEM] UP
KEY_PRESS - 160 1
++++ 0 ms ++++
setPixmapNum(1) failed! defined pixmaps: [<enigma.gPixmapPtr; proxy of <Swig Object of type 'ePtr< gPixmap > *' at 0x179f6b0> >]
setting for adapter eth0 attribute up to value True
setting for adapter eth0 attribute dhcp to value False
setting for adapter eth0 attribute ip to value [192, 168, 178, 20]
setting for adapter eth0 attribute netmask to value [255, 255, 255, 0]
setting for adapter eth0 attribute gateway to value [192, 168, 178, 1]
[ePopen] command: ifdown eth0
Traceback (most recent call last):
KEY: 160 - OK
**** 55 1 ****
File "/usr/lib/enigma2/python/mytest.py", line 191, in processDelay
callback(*retval)
File "usr/lib/enigma2/python/Screens/NetworkSetup.py", line 525, in keySaveConfirm
File "usr/lib/enigma2/python/Screens/NetworkSetup.py", line 573, in applyConfig
File "usr/lib/enigma2/python/Components/Network.py", line 136, in writeNetworkConfig
IOError: [Errno 28] No space left on device: '/etc/network/interfaces'
(PyObject_CallObject(<bound method Session.processDelay of <__main__.Session instance at 0x15f3c8c>>,()) failed)
++++ 75 ms ++++
KEY_RELEASE - 160 00 1 1 CAUSE=Timeout
---- 132 ms ----
[SEM] DOWN
getResolvedKey config.plugins.crashlogautosubmit.sendAnonCrashlog failed !! (Typo??)
getResolvedKey config.plugins.crashlogautosubmit.addNetwork failed !! (Typo??)
getResolvedKey config.plugins.crashlogautosubmit.addWlan failed !! (Typo??)
main thread is non-idle! display spinner!

[Prince3k]

Log erstellen war ne Katastrophe.

Beim ersten Start stürzt das hiesige logging Tool ab, wenn es zum Assistenten kommt.

Dann stürzt es ein 2. mal ab, wenn im Assistenten die Daten für das Netzwerk gesichert werden.



Als ich ein 2. mal das Image drüber geflasht habe, hatte es dann anscheinend geklappt, als ich den Assistenten in englisch durchlaufen ließ.

Aber der Plugin Ordner ist offline, obwohl anscheinend lt. Netzwerktest eine Netzverbindung bestehen würde.
Ferner erkennt das Image auch nicht meine Filme drauf.

[TheChip]

No space left on device scheint das Problem zu sein. Kannst Du mal ein USB Image probieren?

[Prince3k]

No space left on device scheint das Problem zu sein. Kannst Du mal ein USB Image probieren?


mache ich dann an meinem nächsten freien Tag, kostet mich gute 2 Stunden bis ich dann wieder auf TITAN alles wieder laufen habe.

Wie bekomme denn die USB- Variante zum Laufen ?
auf dem TOPFIELD habe ich ne config- Datei, die anpassen kann. Wie funktioniert das auf dem Atemio 7600 ? über ART 2.0 ?

Hier konnte ich noch fast das Ende des logs per Screenshot retten, falls das jemanden weiterhilft.
5353

Ein paar Zeilen folgten wohl noch bevor sich der Receiver aufhing und das Logging Tool abschmierte.

[santa]

auf dem server ist ein neues image, bitte mal testen

[Prince3k]

Läuft nun.

Wie könnte ich Plugins auf einen Swapstick installieren ?
Wenn ich mir jetzt mal den root anschaue, ist der Speicher nun vollkommen ausgeschöpft, so dass das Installieren von Plugins aufgrund von zu geringem Speicher nicht möglich ist.
Dann stellt sich die Frage wie ich es hinbekomme, dass der Receiver die Festplatte mit den Aufnahmen erkennt.
Die Festplatte wird unter Festplatten erkannt, jedoch nicht der Inhalt.
Die Platte müsste damals über TITAN ext3 oder ext4 formatiert worden sein.

[Surfacedj]

Schau bitte mal unter /usr/local/share/enigma2/ nach ob sich darin noch die ordner HDMUSkin und po befinden. Sie sollten eigentlich in den internalswap verschoben sein. Das scheint nicht richtig zu klappen. Bei mir waren die Ordner zwar im
internalswap, wurden aber in /usr/local/share/enigma2/ nicht gelöscht. Dann würde der speicher reichen. Ausserdem lösche ich immer noch in /boot/ die dateien bootvideo.mkv und bootlogo.mvi und in
usr/lib/enigma2/python/Plugins/Extensions/BMediaCenter/saver/ die bilder (screensaver abschalten). Dann reicht der Speicher auch für Plugins.