Hallo,
hier mein Schnelltest.
Ich bekomme ob Onlineupdate oder Stick nach der Netzwerkkonfiguration mit bestätigen mit OK
jedesmal ein WS.
Da scheint eine FIFOList zu fehlen. Siehe Anhang.
Nach reboot kann man aber die Settings zurückspielen und das Image läuft.
Bei Aufruf der Plugins kommt die Fehlermeldung, das der Satfinder nicht inst werden kann. wegen der FIFOlist.
Außerdem wird nach der Konfiguration des Netzwerks, wo man mit OK bestätigt, in dem Fenster wo die Sekunden
runtergezählt werden keine Sekunden angezeigt sondern irgend was mit Projekt-Id-Version:enigma2.
Auch bei Aufruf der Plugins.
<?xml version="1.0" encoding="utf-8"?>
<HDMU>
<enigma2>
<crashdate>Sat Jan 1 01:01:51 2000</crashdate>
<compiledate>Oct 20 2013</compiledate>
<skin>skin.xml</skin>
<sourcedate>Oct 20 2013</sourcedate>
<rev>
<=!=[=C=D=A=T=A=[
-----====== HDMU 11566 enigma2 Git 5563 ======-----
]=]=>
</rev>
<freespace>
<=!=[=C=D=A=T=A=[
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/root 122880 48212 74668 39% /
tmpfs 58456 0 58456 0% /ram
/dev/root 122880 48212 74668 39% /dev.static
tmpfs 58456 0 58456 0% /dev
tmpfs 58456 0 58456 0% /dev/shm
tmpfs 58456 8 58448 0% /tmp
/dev/mtdblock8 8192 3368 4824 41% /boot
]=]=>
</freespace>
<freeram>
<=!=[=C=D=A=T=A=[
total used free shared buffers
Mem: 116912 78560 38352 0 0
-/+ buffers: 78560 38352
Swap: 0 0 0
]=]=>
</freeram>
<version>3.0.0</version>
</enigma2>
<image>
<stbmodel>ufs913</stbmodel>
<kernelversion>
<=!=[=C=D=A=T=A=[
Linux UFS913 2.6.32.59_stm24_0211 #1 PREEMPT Sun Oct 20 22:16:57 CEST 2013 sh4 GNU/Linux
]=]=>
</kernelversion>
<kernelcmdline>console=ttyAS0,115200 root=/dev/mtdblock9 rw rootfstype=jffs2 init=/bin/devinit coprocessor_mem=4m@0x40000000,4m@0x40400000 printk=1 panic=2 stmmaceth=ethaddr:00:00:00:00:00:00</kernelcmdline>
<nimsockets>NIM Socket 0:</nimsockets>
<imageversion>
<=!=[=C=D=A=T=A=[
version=0350200905300000
]=]=>
</imageversion>
<imageissue>
<!-- No such file or directory -->
</imageissue>
</image>
<crashlogs>
<enigma2crashlog>
<=!=[=C=D=A=T=A=[
nection!
HOTPLUG connection!
HOTPLUG connection!
HOTPLUG connection!
HOTPLUG connection!
HOTPLUG connection!
HOTPLUG connection!
HOTPLUG connection!
HOTPLUG connection!
HOTPLUG connection!
HOTPLUG connection!
HOTPLUG connection!
HOTPLUG connection!
HOTPLUG connection!
HOTPLUG connection!
HOTPLUG connection!
child has terminated
pipes closed
[ePopen] command: route -n | grep eth0
poll: unhandled POLLERR/HUP/NVAL for fd 37(16)
hotplug: ACTION=add
complete ACTION=add
hotplug: ACTION=add
complete ACTION=add
hotplug: ACTION=add
complete ACTION=add
hotplug: ACTION=add
complete ACTION=add
hotplug: ACTION=add
complete ACTION=add
hotplug: ACTION=add
complete ACTION=add
hotplug: ACTION=add
complete ACTION=add
hotplug: ACTION=add
complete ACTION=add
hotplug: ACTION=add
complete ACTION=add
hotplug: ACTION=add
complete ACTION=add
hotplug: ACTION=add
complete ACTION=add
hotplug: ACTION=add
complete ACTION=add
hotplug: ACTION=add
complete ACTION=add
hotplug: ACTION=add
complete ACTION=add
hotplug: ACTION=add
complete ACTION=add
hotplug: ACTION=add
complete ACTION=add
hotplug: ACTION=add
complete ACTION=add
hotplug: ACTION=add
complete ACTION=add
hotplug: ACTION=add
complete ACTION=add
hotplug: ACTION=add
complete ACTION=add
hotplug: ACTION=add
complete ACTION=add
hotplug: ACTION=add
complete ACTION=add
hotplug: ACTION=add
complete ACTION=add
hotplug: ACTION=add
complete ACTION=add
hotplug: ACTION=add
complete ACTION=add
hotplug: ACTION=add
complete ACTION=add
hotplug: ACTION=add
complete ACTION=add
hotplug: ACTION=add
complete ACTION=add
hotplug: ACTION=add
complete ACTION=add
hotplug: ACTION=add
complete ACTION=add
hotplug: ACTION=add
complete ACTION=add
hotplug: ACTION=add
complete ACTION=add
hotplug: ACTION=add
complete ACTION=add
child has terminated
pipes closed
192.XXX
0.0.0.0
nameservers: [[192, XXX,XX 1]]
read configured interface: {'lo': {'dhcp': False}, 'eth0': {'dhcp': False, 'netmask': [255, 255, 255, 0], 'gateway': [192, XXX, XX, 1], 'address': [192, XXX, XX, X]}}
self.ifaces after loading: {'eth0': {'preup': False, 'predown': False, 'ip': [192, XXX, XX,X], 'up': True, 'mac': '00:XX:XX:XX:XX:XX', 'dhcp': False, 'bcast': [192, XXX,XX, 255], 'netmask': [255, 255, 255, 0], 'gateway': [192, XXX, XX, 1]}}
poll: unhandled POLLERR/HUP/NVAL for fd 70(16)
HOTPLUG connection lost!
hotplug: {'ACTION': 'add', 'PHYSDEVPATH': '-', 'DEVPATH': '/devices/platform/stmmaceth.0/0:01'}
couldn't read model: [Errno 2] No such file or directory: '/sys/block/0:0/device/model'
HOTPLUG connection lost!
hotplug: {'ACTION': 'add', 'PHYSDEVPATH': '-', 'DEVPATH': '/devices/platform/stmmaceth.0/0:02'}
couldn't read model: [Errno 2] No such file or directory: '/sys/block/0:0/device/model'
HOTPLUG connection lost!
hotplug: {'ACTION': 'add', 'PHYSDEVPATH': '-', 'DEVPATH': '/devices/platform/stmmaceth.0/0:00'}
couldn't read model: [Errno 2] No such file or directory: '/sys/block/0:0/device/model'
HOTPLUG connection lost!
hotplug: {'ACTION': 'add', 'PHYSDEVPATH': '-', 'DEVPATH': '/devices/platform/stmmaceth.0/0:03'}
couldn't read model: [Errno 2] No such file or directory: '/sys/block/0:0/device/model'
HOTPLUG connection lost!
hotplug: {'ACTION': 'add', 'PHYSDEVPATH': '-', 'DEVPATH': '/devices/platform/stmmaceth.0/0:04'}
couldn't read model: [Errno 2] No such file or directory: '/sys/block/0:0/device/model'
HOTPLUG connection lost!
hotplug: {'ACTION': 'add', 'PHYSDEVPATH': '-', 'DEVPATH': '/devices/platform/stmmaceth.0/0:05'}
couldn't read model: [Errno 2] No such file or directory: '/sys/block/0:0/device/model'
HOTPLUG connection lost!
hotplug: {'ACTION': 'add', 'PHYSDEVPATH': '-', 'DEVPATH': '/devices/platform/stmmaceth.0/mdio_bus/0'}
couldn't read model: [Errno 2] No such file or directory: '/sys/block/0/device/model'
HOTPLUG connection lost!
hotplug: {'ACTION': 'add', 'PHYSDEVPATH': '-', 'DEVPATH': '/devices/platform/stmmaceth.0/0:07'}
couldn't read model: [Errno 2] No such file or directory: '/sys/block/0:0/device/model'
HOTPLUG connection lost!
hotplug: {'ACTION': 'add', 'PHYSDEVPATH': '-', 'DEVPATH': '/devices/platform/stmmaceth.0/0:08'}
couldn't read model: [Errno 2] No such file or directory: '/sys/block/0:0/device/model'
HOTPLUG connection lost!
hotplug: {'ACTION': 'add', 'PHYSDEVPATH': '-', 'DEVPATH': '/devices/platform/stmmaceth.0/0:06'}
couldn't read model: [Errno 2] No such file or directory: '/sys/block/0:0/device/model'
HOTPLUG connection lost!
hotplug: {'ACTION': 'add', 'PHYSDEVPATH': '-', 'DEVPATH': '/devices/platform/stmmaceth.0/0:09'}
couldn't read model: [Errno 2] No such file or directory: '/sys/block/0:0/device/model'
HOTPLUG connection lost!
hotplug: {'ACTION': 'add', 'PHYSDEVPATH': '-', 'DEVPATH': '/devices/platform/stmmaceth.0/0:0a'}
couldn't read model: [Errno 2] No such file or directory: '/sys/block/0:0a/device/model'
HOTPLUG connection lost!
hotplug: {'ACTION': 'add', 'PHYSDEVPATH': '-', 'DEVPATH': '/devices/platform/stmmaceth.0/0:0b'}
couldn't read model: [Errno 2] No such file or directory: '/sys/block/0:0b/device/model'
HOTPLUG connection lost!
hotplug: {'ACTION': 'add', 'PHYSDEVPATH': '-', 'DEVPATH': '/devices/platform/stmmaceth.0/0:0c'}
couldn't read model: [Errno 2] No such file or directory: '/sys/block/0:0c/device/model'
HOTPLUG connection lost!
hotplug: {'ACTION': 'add', 'PHYSDEVPATH': '-', 'DEVPATH': '/devices/platform/stmmaceth.0/0:0d'}
couldn't read model: [Errno 2] No such file or directory: '/sys/block/0:0d/device/model'
HOTPLUG connection lost!
hotplug: {'ACTION': 'add', 'PHYSDEVPATH': '-', 'DEVPATH': '/devices/platform/stmmaceth.0/0:0e'}
couldn't read model: [Errno 2] No such file or directory: '/sys/block/0:0e/device/model'
HOTPLUG connection lost!
hotplug: {'ACTION': 'add', 'PHYSDEVPATH': '-', 'DEVPATH': '/devices/platform/stmmaceth.0/0:0f'}
couldn't read model: [Errno 2] No such file or directory: '/sys/block/0:0f/device/model'
HOTPLUG connection lost!
hotplug: {'ACTION': 'add', 'PHYSDEVPATH': '-', 'DEVPATH': '/devices/platform/stmmaceth.0/0:10'}
couldn't read model: [Errno 2] No such file or directory: '/sys/block/0:1/device/model'
HOTPLUG connection lost!
hotplug: {'ACTION': 'add', 'PHYSDEVPATH': '-', 'DEVPATH': '/devices/platform/stmmaceth.0/0:11'}
couldn't read model: [Errno 2] No such file or directory: '/sys/block/0:1/device/model'
HOTPLUG connection lost!
hotplug: {'ACTION': 'add', 'PHYSDEVPATH': '-', 'DEVPATH': '/devices/platform/stmmaceth.0/0:12'}
couldn't read model: [Errno 2] No such file or directory: '/sys/block/0:1/device/model'
HOTPLUG connection lost!
hotplug: {'ACTION': 'add', 'PHYSDEVPATH': '-', 'DEVPATH': '/devices/platform/stmmaceth.0/0:13'}
couldn't read model: [Errno 2] No such file or directory: '/sys/block/0:1/device/model'
HOTPLUG connection lost!
hotplug: {'ACTION': 'add', 'PHYSDEVPATH': '-', 'DEVPATH': '/devices/platform/stmmaceth.0/0:14'}
couldn't read model: [Errno 2] No such file or directory: '/sys/block/0:1/device/model'
HOTPLUG connection lost!
hotplug: {'ACTION': 'add', 'PHYSDEVPATH': '-', 'DEVPATH': '/devices/platform/stmmaceth.0/0:16'}
couldn't read model: [Errno 2] No such file or directory: '/sys/block/0:1/device/model'
HOTPLUG connection lost!
hotplug: {'ACTION': 'add', 'PHYSDEVPATH': '-', 'DEVPATH': '/devices/platform/stmmaceth.0/0:15'}
couldn't read model: [Errno 2] No such file or directory: '/sys/block/0:1/device/model'
HOTPLUG connection lost!
hotplug: {'ACTION': 'add', 'PHYSDEVPATH': '-', 'DEVPATH': '/devices/platform/stmmaceth.0/0:17'}
couldn't read model: [Errno 2] No such file or directory: '/sys/block/0:1/device/model'
HOTPLUG connection lost!
hotplug: {'ACTION': 'add', 'PHYSDEVPATH': '-', 'DEVPATH': '/devices/platform/stmmaceth.0/0:18'}
couldn't read model: [Errno 2] No such file or directory: '/sys/block/0:1/device/model'
HOTPLUG connection lost!
hotplug: {'ACTION': 'add', 'PHYSDEVPATH': '-', 'DEVPATH': '/devices/platform/stmmaceth.0/0:19'}
couldn't read model: [Errno 2] No such file or directory: '/sys/block/0:1/device/model'
HOTPLUG connection lost!
hotplug: {'ACTION': 'add', 'PHYSDEVPATH': '-', 'DEVPATH': '/devices/platform/stmmaceth.0/0:1a'}
couldn't read model: [Errno 2] No such file or directory: '/sys/block/0:1a/device/model'
HOTPLUG connection lost!
hotplug: {'ACTION': 'add', 'PHYSDEVPATH': '-', 'DEVPATH': '/devices/platform/stmmaceth.0/0:1b'}
couldn't read model: [Errno 2] No such file or directory: '/sys/block/0:1b/device/model'
HOTPLUG connection lost!
hotplug: {'ACTION': 'add', 'PHYSDEVPATH': '-', 'DEVPATH': '/devices/platform/stmmaceth.0/0:1c'}
couldn't read model: [Errno 2] No such file or directory: '/sys/block/0:1c/device/model'
HOTPLUG connection lost!
hotplug: {'ACTION': 'add', 'PHYSDEVPATH': '-', 'DEVPATH': '/devices/platform/stmmaceth.0/0:1d'}
couldn't read model: [Errno 2] No such file or directory: '/sys/block/0:1d/device/model'
HOTPLUG connection lost!
hotplug: {'ACTION': 'add', 'PHYSDEVPATH': '-', 'DEVPATH': '/devices/platform/stmmaceth.0/0:1e'}
couldn't read model: [Errno 2] No such file or directory: '/sys/block/0:1e/device/model'
HOTPLUG connection lost!
hotplug: {'ACTION': 'add', 'PHYSDEVPATH': '-', 'DEVPATH': '/devices/platform/stmmaceth.0/0:1f'}
couldn't read model: [Errno 2] No such file or directory: '/sys/block/0:1f/device/model'
setPixmapNum(1) failed! defined pixmaps: [<enigma.gPixmapPtr; proxy of <Swig Object of type 'ePtr< gPixmap > *' at 0x17310f8> >]
illegal flag wfBorder!
Timeout!
setPixmapNum(1) failed! defined pixmaps: [<enigma.gPixmapPtr; proxy of <Swig Object of type 'ePtr< gPixmap > *' at 0x17310f8> >]
finished
code self.AdapterSetupEnd(self.selectedInterface)
getStepWithID: confdns
result: 3
Updating values in step 4
set LCD text
wizard step: {'code': u'self.clearSelectedKeys()\nself.selectKey("OK")', 'text': 'Please configure or verify your Nameservers by filling out the required values.\nWhen you are ready press OK to continue.', 'displaytext': 'Configure nameservers', 'id': 'confdns', 'condition': '', 'timeoutaction': 'nextpage', 'nextstep': 'checklanstatusend', 'code_async': '', 'codeafter_async': u'self.checkNetwork()', 'timeoutstep': '', 'list': [], 'timeout': None, 'codeafter': '', 'config': {'screen': <class 'Screens.NetworkSetup.NameserverSetup'>, 'args': None, 'type': 'ConfigList'}}
wizard text Konfigurieren Sie Ihre DNS-Server durch Ausfüllen der entsprechenden Werte.
Drücken Sie OK zum Fortfahren
set LCD text
code self.clearSelectedKeys()
self.selectKey("OK")
selectPic: arrowdown
showing list, 4
self.list: <Components.Sources.List.List object at 0x172368c>
self.list: <Components.Sources.List.List object at 0x172368c>
self.list: <Components.Sources.List.List object at 0x172368c>
self.list: <Components.Sources.List.List object at 0x172368c>
self.list: <Components.Sources.List.List object at 0x172368c>
self.list: <Components.Sources.List.List object at 0x172368c>
setZPosition
showing config
wizard screen <class 'Screens.NetworkSetup.NameserverSetup'>
backup-list: [[192, XXX, XX, 1]]
clearConfigList <Components.ConfigList.ConfigList object at 0x172ca6c> <Components.ConfigList.ConfigList object at 0x172360c>
clearConfigList <Components.ConfigList.ConfigList object at 0x172360c> <Components.ConfigList.ConfigList object at 0x172360c>
Now: 4
Now: 4
OK
finished
code self.checkNetwork()
[ePopen] command: ping -c 1 www.openpli.org
[ePopen] command: ping -c 1 www.google.nl
[ePopen] command: ping -c 1 www.google.com
illegal flag wfBorder!
Now: 4
child has terminated
pipes closed
child has terminated
pipes closed
child has terminated
pipes closed
poll: unhandled POLLERR/HUP/NVAL for fd 37(16)
poll: unhandled POLLERR/HUP/NVAL for fd 40(16)
poll: unhandled POLLERR/HUP/NVAL for fd 43(16)
setPixmapNum(1) failed! defined pixmaps: [<enigma.gPixmapPtr; proxy of <Swig Object of type 'ePtr< gPixmap > *' at 0x17310f8> >]
getStepWithID: checklanstatusend
result: 4
getStepWithID: checklanstatusend
result: 4
Updating values in step 5
set LCD text
wizard step: {'code': u'self.clearSelectedKeys()\nself.selectKey("OK")', 'text': 'Your receiver is now ready to use.\n\nYour internet connection is working now.\n\nPlease press OK to continue.', 'displaytext': 'Please follow the instructions on the TV', 'id': 'checklanstatusend', 'condition': u'self.condition = (self.InterfaceState == True )', 'timeoutaction': 'nextpage', 'nextstep': 'end', 'code_async': '', 'codeafter_async': '', 'timeoutstep': '', 'list': [], 'timeout': None, 'codeafter': u'currStep = self.numSteps \nself.wizard[currStep]["nextstep"] = None\nself.markDone()\nself.close()', 'config': {'screen': None, 'args': None, 'type': ''}}
wizard text Ihr Receiver ist jetzt konfiguriert.
Ihre Internetverbindung funktioniert nun.
Bitte OK drücken zum Fortfahren.
set LCD text
code self.clearSelectedKeys()
self.selectKey("OK")
selectPic: arrowdown
showing list, 5
self.list: <Components.Sources.List.List object at 0x172368c>
self.list: <Components.Sources.List.List object at 0x172368c>
self.list: <Components.Sources.List.List object at 0x172368c>
self.list: <Components.Sources.List.List object at 0x172368c>
self.list: <Components.Sources.List.List object at 0x172368c>
self.list: <Components.Sources.List.List object at 0x172368c>
setZPosition
showing config
Now: 5
OK
finished
code currStep = self.numSteps
self.wizard[currStep]["nextstep"] = None
self.markDone()
self.close()
getStepWithID: end
result: 13
Updating values in step 14
wizard step: {'code': u'self.clearSelectedKeys()\nself.selectKey("OK")', 'text': 'Thank you for using the wizard.\nPlease press OK to continue.', 'id': 'end', 'condition': '', 'timeoutaction': 'nextpage', 'nextstep': None, 'code_async': '', 'codeafter_async': '', 'timeoutstep': '', 'list': [], 'timeout': None, 'codeafter': '', 'config': {'screen': None, 'args': None, 'type': ''}}
wizard text Vielen Dank, dass Sie den Assistenten benutzt haben.
Drücken Sie OK zum Fortfahren.
code self.clearSelectedKeys()
self.selectKey("OK")
selectPic: arrowdown
showing list, 14
self.list: <Components.Sources.List.List object at 0x172368c>
self.list: <Components.Sources.List.List object at 0x172368c>
self.list: <Components.Sources.List.List object at 0x172368c>
self.list: <Components.Sources.List.List object at 0x172368c>
self.list: <Components.Sources.List.List object at 0x172368c>
self.list: <Components.Sources.List.List object at 0x172368c>
setZPosition
showing config
Now: 14
Now: 14
Reading ['startwizard.xml']
Screen <class 'Screens.StartWizard.StartWizard'>((), {}): <type 'exceptions.ImportError'>
Traceback (most recent call last):
File "/usr/lib/enigma2/python/mytest.py", line 225, in create
return screen(self, *arguments, **kwargs)
File "usr/lib/enigma2/python/Screens/StartWizard.py", line 16, in __init__
File "usr/lib/enigma2/python/Screens/WizardLanguage.py", line 7, in __init__
File "usr/lib/enigma2/python/Screens/Wizard.py", line 169, in __init__
File "usr/lib/python2.7/xml/sax/expatreader.py", line 107, in parse
File "usr/lib/python2.7/xml/sax/xmlreader.py", line 123, in parse
File "usr/lib/python2.7/xml/sax/expatreader.py", line 207, in feed
File "usr/lib/python2.7/xml/sax/expatreader.py", line 301, in start_element
File "usr/lib/enigma2/python/Screens/Wizard.py", line 100, in startElement
File "<string>", line 1, in <module>
File "usr/lib/enigma2/python/Screens/ScanSetup.py", line 2, in <module>
File "usr/lib/enigma2/python/Screens/ServiceScan.py", line 6, in <module>
ImportError: No module named FIFOList
Traceback (most recent call last):
File "/usr/lib/enigma2/python/mytest.py", line 191, in processDelay
callback(*retval)
File "usr/lib/enigma2/python/Tools/BoundFunction.py", line 9, in __call__
File "/usr/lib/enigma2/python/mytest.py", line 475, in runNextScreen
session.openWithCallback(boundFunction(runNextScre en, session, screensToRun[1:]), screen, *args)
File "/usr/lib/enigma2/python/mytest.py", line 294, in openWithCallback
dlg.callback = callback
AttributeError: 'NoneType' object has no attribute 'callback'
(PyObject_CallObject(<bound method Session.processDelay of <__main__.Session instance at 0x14d502c>>,()) failed)
getResolvedKey config.plugins.crashlogautosubmit.sendAnonCrashlog failed !! (Typo??)
getResolvedKey config.plugins.crashlogautosubmit.addNetwork failed !! (Typo??)
getResolvedKey config.plugins.crashlogautosubmit.addWlan failed !! (Typo??)
]=]=>
</enigma2crashlog>
</crashlogs>
</HDMU>
Gruß
Chris
Powered by vBulletin® Version 4.2.5 Copyright ©2024 Adduco Digital e.K. und vBulletin Solutions, Inc. Alle Rechte vorbehalten.