Archiv verlassen und diese Seite im Standarddesign anzeigen : NAS Server mit einbinden?
Hey ;) habe mich schon versucht hier durchzulesen aber nur von externen platten was gelesen, habe ne NSA 310 Server von Zyxel am eigenen Netzwerk zuhause hängen. mit der original soft konnte ich direkt auf die platte zugreifen und mir die daten drauf anhören bzw ansehen. Habe schon mal versucht in den einstellungen rumzuspielen und was einzustellen, leider ohne erfolg. mir wird der NSA über netzwerk angezeigt. Welche einstellungen und wo muss ich vornehmen um wieder an meine sachen zu kommen? Habe das aktuelle Image drauf.
Falls es schon nen thema dazu gibt sorry aber habs leider nicht gefunden auch nicht mit der suche also nicht steinigen *g*
Danke für jegliche hilfe.
lg basti
Schau mal unter Einstellungen - System - Netzwerk nach. Da kannst Du mit dem Mount Manager Dein NAS einrichten. Da steht aber hier auch schon einiges zu.
NSA Server? Jetzt bitten die auch Server an? :) :D
Das ist doch super. Kann man die Daten leichter absaugen, wenn der Server mir gehört. :cool:
Mensch, den hab ich auch. Au Weia:ba154:
Gruß
Chris
Hallo Ich habe genau das gleiche Problem mit NSA 320. Ich habe hier schon ziemlich alles über NAS gelesen, bin aber bis jetzt auch nur soweit, daß das NAS angezeigt wird und auch die freigegebenen Ordner.
Die Videos (mkv,avi)in den Ordnern werden aber nicht angezeigt und können dementsprechend auch nicht wiedergegeben werden.
Es läuft das aktuellste Image auf GM Triplex.
suchmich1983
08.11.2013, 14:16
heisst sicher NAS und nicht NSA... ich habs mal umbenannt
heisst wirklich Zyxel NSA320
Also mit meiner Azbox (OpenRSI)habe ich jetzt hingekriegt. Ich mußte noch die Aufnahmepfade anpassen, Standard Filmlisten Ort und Aufnahmeverzeichnis.
Beim Triplex mit HDMU ist es nicht möglich die Pfade zu ändern. Oder kann mir jemand sagen Wie ?
Manuell kannst Du den Pfad im Timer wechseln.
Im Player Menü, Filmauswahl, kannst Du über -> gelb auch den Network Mount wählen. Aber auch in der Network Confioguration im Mount Manager kann man doch im Moutpoints management die Netzwerk Freigabe ändern, hier kann man auch use as HDD replacement gewählt werden. Das macht aber schon mal Probleme, weil der EPG da gespeichert wird und beim Senderwechsel immer wieder auf das NAS zugegriffen wird und es eventuell aus dem Standby holt.
Danke für die hilfreichen Tips. Ich hatte alles probiert, wie immer wieder beschrieben.
Jetzt habe ich mal die externe Festplatte abgezogen und siehe da: Ich kann die Pfade ändern !
Da hätte ich auch früher drauf kommen können.:ba106:Jetzt funktioniert es wie gewünscht.
Also Festplatte UND Nas geht wohl nicht ?
Normalerweise schon, dann darf aber das NAS nicht als HDD Replacement sein, so habe ich es. Wenn ich vom Server schauen will, schalte ich entweder um, oder spiele die *.ts mit dem Media Center ab.
Mahlzeit, es lief ne ganze zeit sehr gut das ich direkt auf den server aufnehmen konnte. aber seit dem letzten update was er gezogen hat geht nix mehr. kann keine filme mehr aufnehmen und auch nicht auf den ordner zugreifen wenn ich auf "play" drücke... is seitdem irgendwas verstellt wurden? hab nun auch nen flackern im bild im mediaportal. hängt das alles zusammen?
danke für tipps ;)
schönen dienstag euch
Zu wenig Infos...
Welche Box mit welchem Image?
Server oder NAS?
Dann beim gestarteten Image mal via telnet auf die Box und die Ausgabe der Befehle posten:
df -h; blkid; fdisk -l; mount
....aber seit dem letzten update was er gezogen hat geht nix mehr....
Genau,
bitte mehr Info. "Was er gezogen hat" könnte auch ein Update bei einem alten Image sein, und keine Installation von einem neuen Image. Also bitte angewöhnen pauschale Beiträge zu vermeiden.
hallo, danke
ist der nas310 und der kathrein ufs 912 receiver.
Systeminfos:
Kernel 2.6.32.59 stm24 0211
HDMU Rev: 11573
GIT Rev: 5563
leider weiss ich nicht wie das mit telnet funktioniert.
edit:
df -h; blkid; fdisk -l; mount
hab ich bei telnet auf der box eingegeben. leider kann ich den inhalt nicht kopieren. bzw mit welchen tasten geht das?
hoffe damit kann man etwas anfangen?
mfg
Markieren, dann strg-c oder strg-einfg.
edit:
df -h; blkid; fdisk -l; mount
hab ich bei telnet auf der box eingegeben. leider kann ich den inhalt nicht kopieren. bzw mit welchen tasten geht das?
welches Tool nutzt du für telnet? Normales Command Prompt?
Hallo,
habe Zyxel NSA320, TOPF mit dem neusten HDMU-IMAGE, wird auch als gemountet angezeigt.
Ich kann auf das NAS zugreifen, aber die Filme ruckeln, haben Aussetzer und werden einfach nicht richtig übertragen, damit man vernünftig Fernsehen kann. Bei Musikdateien genau das selbige, ausser das man bei diesen sowieso nichts sieht ;-)!
Hat jemand von Euch eine Ahnung an was das liegen könnte?
Netzwerk müsste eigentlich reichen, von der Geschwindigkeit her. Ist ein 100Mbit, weil TOPF ja auch nur ne`n 100`ter Ethernet hat.
Also wo kann es noch hacken!?
Das ganze läuft über FB 7270 als Netzwerkverteiler, falls es von Bedeutung wäre!
Jemand Ideen oder hatte auch schon mal den Fall!?
Bin über jede Hilfe Dankbar
Schupfa
@schupfa, was hast Du eingestellt, NFS, CIFS, Samba?
Meistens hat man mit NFS beste Erfolge.
@ReWard Habe alles auf nfs eingestellt, aber der grosse Leistungsschub bleibt leider aus. Hier meine Einstellungen:
# automatically generated by enigma 2
NSA320 -fstype=nfs,rw,soft,nolock,tcp,rsize=8192,wsize=819 2 192.168.1.27:/i-data/838a8d3a/nfs/video
NSA320VIDEO -fstype=nfs,rw,nolock,tcp 192.168.1.27:/i-data/838a8d3a/nfs/video/
NSA320MUSIC -fstype=nfs,rw,nolock,tcp 192.168.1.27:/i-data/838a8d3a/nfs/music/
müsste eigentlich so passen, oder!?
Vielleicht solltest Du noch ein wenig mit der rsize und wsize spielen, könnte auch nich etwas bringen. Ich hatte für die besten Ergebnisse auf dem Topf damals 65536 drinnen.
Eins ist allerdings auch Fakt, der Topf gehört mit seinen 266 MHz nicht mehr zu den flottesten Boxen, auch wenn er seine Sache noch sehr gut macht. Aber grad in Netzwerkdingen, ist er nicht so flott.
An die Schnelligkeit des Topf`s hab ich auch schon gedacht, kurzum auf 333 Mhz raufgetaktet.
Das komische an der Sache ist, das ich schon mal über die FBox eine Platte dran hatte über USB und FritzNAS und da lief es einwandfrei!?
Seit ich aber die Anleitung hier aus`m Board ausprobiert hatte "Fritzbox mounten über USB" lief das nicht mehr richtig und ich legte mir ein NSA320 zu, weil ich dachte es läge an der langsamen USB Übertragung der FB.
Tja nun NAS und was soll ich sagen: Kein Geschwindigkeitsrausch:-( PECH!
Ich denke ja, das ich mir etwas verstellt habe, ich komm blos nicht d`rauf was!
Also im Topf kannst Du nicht viel verstellen, in der FritzBox möglich, aber unwahrscheinlich. Es sei denn, Du hättest da was an den Prioritäten verstellt.
Der Topf ist leider vom Prozessor her schwach, wie meine UFS 910, aber das Netzwerk ist eben auch nicht doll, hat man hier schon öfter gelesen.
Bei der UFS 913 habe ich nichts mit rsize und wsize eingestellt, da geht das so. Wenn Du aber testen möchtest solltest Du mal nach netspeed suchen, ist auch im UploadCenter.
Werd ich mal testen. Danke für den Tip und Danke für Deine Zeit.
Melde mich dann wieder!
('-. .-. _ .-') _ _ .-')
( OO ) /( ( OO) )( '.( OO )_
,--. ,--. \ .'_ ,--. ,--.),--. ,--.
| | | | ,`'--..._)| `.' | | | | |
| .| | | | \ '| | | | | .-')
| | | | ' || |'.'| | | |_|( OO )
| .-. | | | / :| | | | | | | `-' /
| | | | | '--' /| | | |(' '-'(_.-'
`--' `--' `-------' `--' `--' `-----'
-----====== HDMU 11573 enigma2 Git 5563 ======-----
BusyBox v1.21.1 (2013-10-21 17:38:20 CEST) built-in shell (ash)
Enter 'help' for a list of built-in commands.
UFS912:~# df -h; blkid; fdisk -l; mount
Filesystem Size Used Available Use% Mounted on
/dev/root 64.0M 53.6M 10.4M 84% /
tmpfs 57.4M 0 57.4M 0% /ram
/dev/root 64.0M 53.6M 10.4M 84% /dev.static
tmpfs 57.4M 0 57.4M 0% /dev
tmpfs 57.4M 0 57.4M 0% /dev/shm
tmpfs 57.4M 28.0K 57.3M 0% /tmp
/dev/mtdblock3 8.0M 3.5M 4.5M 44% /boot
/dev/mtdblock1: LABEL="Compressed" TYPE="cramfs"
rootfs on / type rootfs (rw)
/dev/root on / type jffs2 (rw,relatime)
proc on /proc type proc (rw,relatime)
sysfs on /sys type sysfs (rw,relatime)
tmpfs on /ram type tmpfs (rw,relatime)
/dev/root on /dev.static type jffs2 (rw,relatime)
tmpfs on /dev type tmpfs (rw,relatime)
devpts on /dev/pts type devpts (rw,relatime,gid=5,mode=620)
tmpfs on /dev/shm type tmpfs (rw,relatime)
usbfs on /proc/bus/usb type usbfs (rw,relatime)
tmpfs on /tmp type tmpfs (rw,relatime)
/dev/mtdblock3 on /boot type jffs2 (rw,relatime)
automount(pid451) on /autofs type autofs (rw,relatime,fd=4,pgrp=451,timeout=5,mi
nproto=2,maxproto=4,indirect)
automount(pid453) on /media/net type autofs (rw,relatime,fd=4,pgrp=453,timeout=6
0,minproto=2,maxproto=4,indirect)
UFS912:~#
so hab es hinbekommen..das kommt da...
Ein aktuelles Image wäre zum Vorteil und dann nochmals testen.
Gruß
Chris
kann ich das irgendwie direkt updaten oder muss ich das wieder flashen? sind dann meine ganzen einstellungen weg? schönen sonntag noch
vorher Settings sichern und dann neu flashen
@ReWard
Hier also die Werte:
134.217 Mbit/s or 16.777 Mb/s with udp,sync,rsize=8192
134.217 Mbit/s or 16.777 Mb/s with udp,sync,rsize=65536
134.217 Mbit/s or 16.777 Mb/s with udp,sync,rsize=4096
134.217 Mbit/s or 16.777 Mb/s with udp,sync,rsize=32768
134.217 Mbit/s or 16.777 Mb/s with udp,async,rsize=8192
134.217 Mbit/s or 16.777 Mb/s with udp,async,rsize=65536
134.217 Mbit/s or 16.777 Mb/s with tcp,sync,rsize=8192
134.217 Mbit/s or 16.777 Mb/s with tcp,sync,rsize=65536
134.217 Mbit/s or 16.777 Mb/s with tcp,sync,rsize=49152
134.217 Mbit/s or 16.777 Mb/s with tcp,sync,rsize=16384
134.217 Mbit/s or 16.777 Mb/s with tcp,async,rsize=32768
müsste eigentlich ausreichen oder!?
Bei der Einstellung mit 16 MB!
Sieht irgendwie komisch aus, alle gleich?
Da stimmt was nicht. Sieht aus, als wenn er das Flash misst.
Gruß
Chris
Im Uploadcenter unter Tools habe ich mal Netspeed hinterlegt. Kleine Anleitung ist auch dabei.
Wenn man die Datei mit mit einem Texteditor öffnet ist dort auch noch einmal beschrieben,
was man einstellen muss. Ob cifs oder NFS.
Hallo!
Ich probier es nochmal und Danke für die Antworten.
Wird ein bisschen dauern:-)
Gruß
Hier die komplette Auflistung, mit nfs und sync option auf yes!
Mount options: udp, async, wsize=4096
writing 16 MBytes...
Success after 14 seconds
Mount options: udp, async, rsize=4096
reading 16 MBytes...
Failure
Mount options: tcp, sync, wsize=4096
writing 16 MBytes...
Success after 68 seconds
Mount options: tcp, sync, rsize=4096
reading 16 MBytes...
Success after 1 seconds
Mount options: tcp, async, wsize=4096
writing 16 MBytes...
Success after 12 seconds
Mount options: tcp, async, rsize=4096
reading 16 MBytes...
Success after 253 seconds
Mount options: udp, sync, wsize=8192
writing 16 MBytes...
Success after 36 seconds
Mount options: udp, sync, rsize=8192
reading 16 MBytes...
expr: division by zero
expr: division by zero
Success after 0 seconds
Mount options: udp, async, wsize=8192
writing 16 MBytes...
Success after 8 seconds
Mount options: udp, async, rsize=8192
reading 16 MBytes...
Success after 1 seconds
Mount options: tcp, sync, wsize=8192
writing 16 MBytes...
Success after 47 seconds
Mount options: tcp, sync, rsize=8192
reading 16 MBytes...
expr: division by zero
expr: division by zero
Success after 0 seconds
Mount options: tcp, async, wsize=8192
writing 16 MBytes...
Success after 8 seconds
Mount options: tcp, async, rsize=8192
reading 16 MBytes...
Success after 214 seconds
Mount options: udp, sync, wsize=16384
writing 16 MBytes...
Success after 43 seconds
Mount options: udp, sync, rsize=16384
reading 16 MBytes...
Success after 1 seconds
Mount options: udp, async, wsize=16384
writing 16 MBytes...
Success after 6 seconds
Mount options: udp, async, rsize=16384
reading 16 MBytes...
Success after 1 seconds
Mount options: tcp, sync, wsize=16384
writing 16 MBytes...
Success after 44 seconds
Mount options: tcp, sync, rsize=16384
reading 16 MBytes...
expr: division by zero
expr: division by zero
Success after 0 seconds
Mount options: tcp, async, wsize=16384
writing 16 MBytes...
Success after 5 seconds
Mount options: tcp, async, rsize=16384
reading 16 MBytes...
Success after 282 seconds
Mount options: udp, sync, wsize=32768
writing 16 MBytes...
Success after 37 seconds
Mount options: udp, sync, rsize=32768
reading 16 MBytes...
expr: division by zero
expr: division by zero
Success after 0 seconds
Mount options: udp, async, wsize=32768
writing 16 MBytes...
Success after 6 seconds
Mount options: udp, async, rsize=32768
reading 16 MBytes...
Failure
Mount options: tcp, sync, wsize=32768
writing 16 MBytes...
Success after 45 seconds
Mount options: tcp, sync, rsize=32768
reading 16 MBytes...
expr: division by zero
expr: division by zero
Success after 0 seconds
Mount options: tcp, async, wsize=32768
writing 16 MBytes...
Success after 4 seconds
Mount options: tcp, async, rsize=32768
reading 16 MBytes...
Success after 1 seconds
Mount options: udp, sync, wsize=49152
writing 16 MBytes...
Success after 40 seconds
Mount options: udp, sync, rsize=49152
reading 16 MBytes...
expr: division by zero
expr: division by zero
Success after 0 seconds
Mount options: udp, async, wsize=49152
writing 16 MBytes...
Success after 5 seconds
Mount options: udp, async, rsize=49152
reading 16 MBytes...
Failure
Mount options: tcp, sync, wsize=49152
writing 16 MBytes...
Success after 48 seconds
Mount options: tcp, sync, rsize=49152
reading 16 MBytes...
expr: division by zero
expr: division by zero
Success after 0 seconds
Mount options: tcp, async, wsize=49152
writing 16 MBytes...
Success after 5 seconds
Mount options: tcp, async, rsize=49152
reading 16 MBytes...
expr: division by zero
expr: division by zero
Success after 0 seconds
Mount options: udp, sync, wsize=65536
writing 16 MBytes...
Success after 39 seconds
Mount options: udp, sync, rsize=65536
reading 16 MBytes...
Success after 1 seconds
Mount options: udp, async, wsize=65536
writing 16 MBytes...
Success after 4 seconds
Mount options: udp, async, rsize=65536
reading 16 MBytes...
Success after 1 seconds
Mount options: tcp, sync, wsize=65536
writing 16 MBytes...
Success after 50 seconds
und weiter geht`s
Mount options: tcp, async, wsize=65536
writing 16 MBytes...
Success after 4 seconds
Mount options: tcp, async, rsize=65536
reading 16 MBytes...
Success after 1 seconds
Results for write throughput:
33.554 Mbit/s or 4.194 Mb/s with udp,async,wsize=65536
33.554 Mbit/s or 4.194 Mb/s with tcp,async,wsize=65536
33.554 Mbit/s or 4.194 Mb/s with tcp,async,wsize=32768
26.843 Mbit/s or 3.355 Mb/s with udp,async,wsize=49152
26.843 Mbit/s or 3.355 Mb/s with tcp,async,wsize=49152
26.843 Mbit/s or 3.355 Mb/s with tcp,async,wsize=16384
22.369 Mbit/s or 2.796 Mb/s with udp,async,wsize=32768
22.369 Mbit/s or 2.796 Mb/s with udp,async,wsize=16384
16.777 Mbit/s or 2.097 Mb/s with udp,async,wsize=8192
16.777 Mbit/s or 2.097 Mb/s with tcp,async,wsize=8192
11.184 Mbit/s or 1.398 Mb/s with tcp,async,wsize=4096
9.586 Mbit/s or 1.198 Mb/s with udp,async,wsize=4096
3.728 Mbit/s or .466 Mb/s with udp,sync,wsize=8192
3.627 Mbit/s or .453 Mb/s with udp,sync,wsize=32768
3.441 Mbit/s or .430 Mb/s with udp,sync,wsize=65536
3.355 Mbit/s or .419 Mb/s with udp,sync,wsize=49152
3.121 Mbit/s or .390 Mb/s with udp,sync,wsize=16384
3.050 Mbit/s or .381 Mb/s with tcp,sync,wsize=16384
2.982 Mbit/s or .372 Mb/s with tcp,sync,wsize=32768
2.855 Mbit/s or .356 Mb/s with tcp,sync,wsize=8192
2.796 Mbit/s or .349 Mb/s with tcp,sync,wsize=49152
2.684 Mbit/s or .335 Mb/s with tcp,sync,wsize=65536
2.354 Mbit/s or .294 Mb/s with udp,sync,wsize=4096
1.973 Mbit/s or .246 Mb/s with tcp,sync,wsize=4096
Results for read throughput:
134.217 Mbit/s or 16.777 Mb/s with udp,sync,rsize=65536
134.217 Mbit/s or 16.777 Mb/s with udp,sync,rsize=4096
134.217 Mbit/s or 16.777 Mb/s with udp,sync,rsize=16384
134.217 Mbit/s or 16.777 Mb/s with udp,async,rsize=8192
134.217 Mbit/s or 16.777 Mb/s with udp,async,rsize=65536
134.217 Mbit/s or 16.777 Mb/s with udp,async,rsize=16384
134.217 Mbit/s or 16.777 Mb/s with tcp,sync,rsize=4096
134.217 Mbit/s or 16.777 Mb/s with tcp,async,rsize=65536
134.217 Mbit/s or 16.777 Mb/s with tcp,async,rsize=32768
.627 Mbit/s = 78398 with tcp,async,rsize=8192
.530 Mbit/s = 66313 with tcp,async,rsize=4096
.475 Mbit/s = 59493 with tcp,async,rsize=16384
Failure or 3.355 Mb/s with udp,async,rsize=49152
Failure or 2.796 Mb/s with udp,async,rsize=32768
Failure or 1.198 Mb/s with udp,async,rsize=4096
= with udp,sync,rsize=8192
= with udp,sync,rsize=49152
= with udp,sync,rsize=32768
= with tcp,sync,rsize=8192
= with tcp,sync,rsize=65536
= with tcp,sync,rsize=49152
= with tcp,sync,rsize=32768
= with tcp,sync,rsize=16384
= with tcp,async,rsize=49152
Und, was sagt Ihr dazu!? Ich weiss damit wenig anzufangen:-(
wie kann ich meine einstellungen vorher speichern? danke
Softwaremanager und lesen.
Gruß
Chris
b.t.w.: Hier im Board ist das schon .zig mal beschrieben worden, wie man seine Settings
b.z.w. Einstellungen sichert.
@schupfa,
da stimmt noch immer irgendwas nicht. Vorallem weil auch noch Fehlermeldungen erscheinen.
Was nimmst du zum messen. Hast du Netspeed schon probiert.
Gruß
Chris
- - - Aktualisiert - - -
Bei Netspeed wird auf dem NAS ein Testfile abgelegt. Bei mir im movie Ordner.
Ist das bei dir vorhanden?
Es wird nach der Messung nicht gelöscht.
Ausserdem ist es genauer, wenn du mit 64MB und nicht mit 16MB misst.
Und hier ist auch zig mal geschrieben worden, das man solche Listen in einen Code Block setzt. Steht übrigens in der FAQ.
Ich möchte mich hiermit entschuldigen, das ich die "Liste" nicht in einen CODEBLOCK gepackt habe. Hab ich wohl überlesen. SRY!!!
Dann mach es auch mal. :)
Man kann einen Beitrag auch editieren (Bearbeiten).
Passt es so!:D
Aber geholfen hat es mir auch nichts!
Habe noch das selbe Problem, einfach zu langsam!
@chris
lasse jetzt, nochmal mit NETSPEED, den Test laufen, diesmal mit 64Mb
mal gucken was jetzt kommt!:confused:
Prima.
Denk nur daran auch den Pfad richtig zu setzen. Wenn Du das Ergebnis hier postest, kopiere mal mit rein, wie Du netspeed gestartet hast.
@ReWard
Mach ich!
Es dauert aber noch ne Weile!
Hast Du(IHR) vielleicht schon eine Vermutung was das sein könnte, oder an was es liegen könnte!?
Was heißt woran es liegen kann, mit netspeed kannst Du die optimale read write Einstellungen für Dein Netz ermitteln. Dann kann man weiter sehen.
:confused:ah ha;)
sleep7750:~# netspeed nfs 64 192.168.1.27 /i-data/838a8d3a/video yes
Measuring NFS throughput...
Mount options: udp, sync, wsize=4096
writing 64 MBytes...
Success after 221 seconds
Mount options: udp, sync, rsize=4096
reading 64 MBytes...
Failure
Mount options: udp, async, wsize=4096
writing 64 MBytes...
Success after 54 seconds
Mount options: udp, async, rsize=4096
reading 64 MBytes...
Failure
Mount options: tcp, sync, wsize=4096
writing 64 MBytes...
Success after 237 seconds
Mount options: tcp, sync, rsize=4096
reading 64 MBytes...
Success after 907 seconds
Mount options: tcp, async, wsize=4096
writing 64 MBytes...
Success after 40 seconds
Mount options: tcp, async, rsize=4096
reading 64 MBytes...
Success after 893 seconds
Mount options: udp, sync, wsize=8192
writing 64 MBytes...
Success after 149 seconds
Mount options: udp, sync, rsize=8192
reading 64 MBytes...
Failure
Mount options: udp, async, wsize=8192
writing 64 MBytes...
Success after 35 seconds
Mount options: udp, async, rsize=8192
reading 64 MBytes...
Failure
Mount options: tcp, sync, wsize=8192
writing 64 MBytes...
Success after 180 seconds
Mount options: tcp, sync, rsize=8192
reading 64 MBytes...
Success after 880 seconds
Mount options: tcp, async, wsize=8192
writing 64 MBytes...
Success after 30 seconds
Mount options: tcp, async, rsize=8192
reading 64 MBytes...
Success after 927 seconds
Mount options: udp, sync, wsize=16384
writing 64 MBytes...
Success after 157 seconds
Mount options: udp, sync, rsize=16384
reading 64 MBytes...
Failure
Mount options: udp, async, wsize=16384
writing 64 MBytes...
Success after 17 seconds
Mount options: udp, async, rsize=16384
reading 64 MBytes...
Failure
Mount options: tcp, sync, wsize=16384
writing 64 MBytes...
Success after 179 seconds
Mount options: tcp, sync, rsize=16384
reading 64 MBytes...
Success after 897 seconds
Mount options: tcp, async, wsize=16384
writing 64 MBytes...
Success after 21 seconds
Mount options: tcp, async, rsize=16384
reading 64 MBytes...
Success after 972 seconds
Mount options: udp, sync, wsize=32768
writing 64 MBytes...
Success after 151 seconds
Mount options: udp, sync, rsize=32768
reading 64 MBytes...
Failure
Mount options: udp, async, wsize=32768
writing 64 MBytes...
Success after 15 seconds
Mount options: udp, async, rsize=32768
reading 64 MBytes...
Failure
Mount options: tcp, sync, wsize=32768
writing 64 MBytes...
Success after 190 seconds
Mount options: tcp, sync, rsize=32768
reading 64 MBytes...
Success after 1810 seconds
Mount options: tcp, async, wsize=32768
writing 64 MBytes...
Success after 19 seconds
Mount options: tcp, async, rsize=32768
reading 64 MBytes...
Success after 1723 seconds
Mount options: udp, sync, wsize=49152
writing 64 MBytes...
Success after 153 seconds
Mount options: udp, sync, rsize=49152
reading 64 MBytes...
Failure
Mount options: udp, async, wsize=49152
writing 64 MBytes...
Success after 15 seconds
Mount options: udp, async, rsize=49152
reading 64 MBytes...
Failure
Mount options: tcp, sync, wsize=49152
writing 64 MBytes...
Success after 187 seconds
Mount options: tcp, sync, rsize=49152
reading 64 MBytes...
Success after 1730 seconds
Mount options: tcp, async, wsize=49152
writing 64 MBytes...
Success after 19 seconds
Mount options: tcp, async, rsize=49152
reading 64 MBytes...
Success after 1881 seconds
Mount options: udp, sync, wsize=65536
writing 64 MBytes...
Success after 153 seconds
Mount options: udp, sync, rsize=65536
reading 64 MBytes...
Failure
Mount options: udp, async, wsize=65536
writing 64 MBytes...
Success after 14 seconds
Mount options: udp, async, rsize=65536
reading 64 MBytes...
Failure
Mount options: tcp, sync, wsize=65536
writing 64 MBytes...
Success after 186 seconds
Mount options: tcp, sync, rsize=65536
reading 64 MBytes...
Failure
Mount options: tcp, async, wsize=65536
writing 64 MBytes...
Success after 18 seconds
Mount options: tcp, async, rsize=65536
reading 64 MBytes...
Failure
Results for write throughput:
38.347 Mbit/s or 4.793 Mb/s with udp,async,wsize=65536
35.791 Mbit/s or 4.473 Mb/s with udp,async,wsize=49152
35.791 Mbit/s or 4.473 Mb/s with udp,async,wsize=32768
31.580 Mbit/s or 3.947 Mb/s with udp,async,wsize=16384
29.826 Mbit/s or 3.728 Mb/s with tcp,async,wsize=65536
28.256 Mbit/s or 3.532 Mb/s with tcp,async,wsize=49152
28.256 Mbit/s or 3.532 Mb/s with tcp,async,wsize=32768
25.565 Mbit/s or 3.195 Mb/s with tcp,async,wsize=16384
17.895 Mbit/s or 2.236 Mb/s with tcp,async,wsize=8192
15.339 Mbit/s or 1.917 Mb/s with udp,async,wsize=8192
13.421 Mbit/s or 1.677 Mb/s with tcp,async,wsize=4096
9.942 Mbit/s or 1.242 Mb/s with udp,async,wsize=4096
3.603 Mbit/s or .450 Mb/s with udp,sync,wsize=8192
3.555 Mbit/s or .444 Mb/s with udp,sync,wsize=32768
3.508 Mbit/s or .438 Mb/s with udp,sync,wsize=65536
3.508 Mbit/s or .438 Mb/s with udp,sync,wsize=49152
3.419 Mbit/s or .427 Mb/s with udp,sync,wsize=16384
2.999 Mbit/s or .374 Mb/s with tcp,sync,wsize=16384
2.982 Mbit/s or .372 Mb/s with tcp,sync,wsize=8192
2.886 Mbit/s or .360 Mb/s with tcp,sync,wsize=65536
2.870 Mbit/s or .358 Mb/s with tcp,sync,wsize=49152
2.825 Mbit/s or .353 Mb/s with tcp,sync,wsize=32768
2.429 Mbit/s or .303 Mb/s with udp,sync,wsize=4096
2.265 Mbit/s or .283 Mb/s with tcp,sync,wsize=4096
Results for read throughput:
.610 Mbit/s = 76260 with tcp,sync,rsize=8192
.601 Mbit/s = 75149 with tcp,async,rsize=4096
.598 Mbit/s = 74814 with tcp,sync,rsize=16384
.591 Mbit/s = 73989 with tcp,sync,rsize=4096
.579 Mbit/s = 72393 with tcp,async,rsize=8192
.552 Mbit/s = 69042 with tcp,async,rsize=16384
.311 Mbit/s = 38948 with tcp,async,rsize=32768
.310 Mbit/s = 38791 with tcp,sync,rsize=49152
.296 Mbit/s = 37076 with tcp,sync,rsize=32768
.285 Mbit/s = 35677 with tcp,async,rsize=49152
Failure or 4.793 Mb/s with udp,async,rsize=65536
Failure or .450 Mb/s with udp,sync,rsize=8192
Failure or 4.473 Mb/s with udp,async,rsize=49152
Failure or 4.473 Mb/s with udp,async,rsize=32768
Failure or .444 Mb/s with udp,sync,rsize=32768
Failure or .438 Mb/s with udp,sync,rsize=65536
Failure or .438 Mb/s with udp,sync,rsize=49152
Failure or .427 Mb/s with udp,sync,rsize=16384
Failure or 3.947 Mb/s with udp,async,rsize=16384
Failure or 3.728 Mb/s with tcp,async,rsize=65536
Failure or .360 Mb/s with tcp,sync,rsize=65536
Failure or .303 Mb/s with udp,sync,rsize=4096
Failure or 1.917 Mb/s with udp,async,rsize=8192
Failure or 1.242 Mb/s with udp,async,rsize=4096
Massig Fehler! Was soll man da einstellen!?
sorry das ich das alte thema nochmal aufgreife, ist es möglich daten vorher vom receiver zu ziehen, damit ich beim neuen image nicht immer alles neu eingeben muss, da ich sonst alles immer wieder eingeben muss und sich irgendwie immer neue ordner auf dem nas erstellen ;)
Ja unter Menü/Plugins / Softwareverwaltung...
Oder mit mat.
MfG
Powered by vBulletin® Version 4.2.5 Copyright ©2024 Adduco Digital e.K. und vBulletin Solutions, Inc. Alle Rechte vorbehalten.