UFS910/Silber/14Watt im Flash : miniFLASH_rev4877-p191.img / Stick : HDMU_11684_E2_uf

[swissSolaris]

Hallo zusammen,

Ich habe heute meine UFS910 wieder belebt, sie bootet auch mit dem Panther Image aus dem Flash ohne Probleme,
jedoch wenn ich dass HDMU Image booten willl bleibt sie bei "b o o t i n g . . ." hängen siehe auszug unten via Serial
hat jemand eine Idee was dass sein kann ?


maxiU-Boot 1.3.1 (May 19 2010 - 23:02:55) - by SoLaLa

DRAM: 64 MB

Flash: 16 MB

In: serial

Out: serial

Err: serial

selected Image to start: ----Flash----

selected Image to start: Kathrein UFS910

selected Image to start: -USB-1-Speed-

selected Image to start: ----USB-2----

selected Image to start: ----USB-3----

selected Image to start: bootdesc_6

selected Image to start: bootdesc_5

selected Image to start: bootdesc_4

selected Image to start: bootdesc_3

selected Image to start: bootdesc_2

selected Image to start: bootdesc_1

selected Image to start: ----Flash----

selected Image to start: Kathrein UFS910

selected Image to start: -USB-1-Speed-

Hit any key to stop autoboot: 0

## Booting image at a0040000 ...

Image Name: Linux-2.6.32.59_stm24_0211

Image Type: SuperH Linux Kernel Image (gzip compressed)

Data Size: 1626057 Bytes = 1.6 MB

Load Address: 84001000

Entry Point: 84002000

Verifying Checksum ... OK

Uncompressing Kernel Image ... OK



Starting kernel console=ttyAS0,115200 root=/dev/sda2 rw

ip=192.168.1.11:192.168.1.10:192.168.1.1:255.255.2 55.0:kathrein:eth0:off

mem=64m coprocessor_mem=4m@0x10000000,4m@0x10400000 rootdelay=6

nwhwconf=device:eth0,hwaddr:00:50:FD:FF:56:3E init=/bin/devinit -

0x00000000 - 0 ...



INIT: version 2.86 booting

insmod: can't insert '/lib/modules/e2_proc.ko': invalid module format

init frontpanel

insmod: can't insert '/lib/modules/vfd.ko': invalid module format

insmod: can't insert '/lib/modules/simu_button.ko': invalid module format

Mount /dev in tmpfs

Copying device nodes to /dev

Starting portmap daemon....

Loading autofs

insmod: can't insert '/lib/modules/autofs4.ko': invalid module format

Starting autofs

Mounting local filesystems...

mount: mounting LABEL=RECORD on /hdd failed: No such file or directory

Cleaning /tmp.

insmod: can't insert '/lib/modules/cpu_frequ.ko': invalid module format

/etc/init.d/rcS: line 674: can't create /proc/cpu_frequ/pll0_ndiv_mdiv:

nonexistent directory

Hostname: UFS910.

insmod: can't insert '/lib/modules/boxtype.ko': invalid module format

init stmfb

insmod: can't insert '/lib/modules/stmcore-display-stx7100.ko': invalid

module format

insmod: can't insert '/lib/modules/stmfb.ko': invalid module format

/etc/init.d/rcS: line 674: can't create /dev/vfd: No such device or address

LOADING MODULES

4096+0 records in

4096+0 records out

4194304 bytes (4.0MB) copied, 0.064612 seconds, 61.9MB/s

4096+0 records in

4096+0 records out

4194304 bytes (4.0MB) copied, 0.063509 seconds, 63.0MB/s

Segmentation fault

load firmware

copLoadFile (file /boot/audio.elf)

ustslave: Kernel Version: 24

base_address 0x10400000

seeking to 0

seeking to 5f00

seeking to 12320

seeking to 1aa20

seeking to 173100

seeking to 173138

seeking to 173170

seeking to 1b9058

seeking to 1b9060

seeking to 1b9068

seeking to 1b9070

seeking to 1d0920

seeking to 1d0a00

copLoadFile (file /boot/video.elf)

ustslave: Kernel Version: 24

base_address 0x10000000

seeking to 0

seeking to 432c0

seeking to 59878

seeking to 598b0

seeking to 598e8

seeking to 5f3d8

seeking to 5f3e4

seeking to 5f3f0

seeking to 62664

seeking to 64700

init embx

insmod: can't insert '/lib/modules/embxshell.ko': invalid module format

insmod: can't insert '/lib/modules/embxmailbox.ko': invalid module format

insmod: can't insert '/lib/modules/embxshm.ko': invalid module format

insmod: can't insert '/lib/modules/mme_host.ko': invalid module format

init AVS

insmod: can't insert '/lib/modules/avs.ko': invalid module format

insmod: can't insert '/lib/modules/mmelog.ko': invalid module format

insmod: can't insert '/lib/modules/mpeg2hw.ko': invalid module format

insmod: can't insert '/lib/modules/ksound.ko': invalid module format

insmod: can't insert '/lib/modules/p2div64.ko': invalid module format

insmod: can't insert '/lib/modules/stm_v4l2.ko': invalid module format

insmod: can't insert '/lib/modules/pseudocard.ko': invalid module format

insmod: can't insert '/lib/modules/cx24116.ko': invalid module format

insmod: can't insert '/lib/modules/cimax.ko': invalid module format

insmod: can't insert '/lib/modules/pti.ko': invalid module format

insmod: can't insert '/lib/modules/stm_monitor.ko': invalid module format

insmod: can't insert '/lib/modules/stmsysfs.ko': invalid module format

insmod: can't insert '/lib/modules/stmdvb.ko': invalid module format

insmod: can't insert '/lib/modules/player2.ko': invalid module format

insmod: can't insert '/lib/modules/sth264pp.ko': invalid module format

insmod: can't insert '/lib/modules/stmalloc.ko': invalid module format

insmod: can't insert '/lib/modules/platform.ko': invalid module format

insmod: can't insert '/lib/modules/silencegen.ko': invalid module format

insmod: can't insert '/lib/modules/smartcard.ko': No such file or directory

insmod: can't insert '/lib/modules/ntfs.ko': invalid module format

insmod: can't insert '/lib/modules/bpamem.ko': invalid module format

insmod: can't insert '/lib/modules/cifs.ko': invalid module format

/etc/init.d/rcS: line 674: can't create /proc/stb/video/videomode:

nonexistent directory

cat: can't open '/proc/boxtype': No such file or directory

[] unknown boxtype

starting telnetd

Starting FTP server: vBoxType: 0

vsftpd.

Mounting local filesystems...

tools/eplayer2.c >

Output

/dev/fb0: No such device

[playback/playback.c:PlaybackOpen] URI=file:///boot/bootvideo.mkv

[container/text_srt.c:Command]

[container/text_srt.c:SrtGetSubtitle]

[container/text_srt.c:SrtGetSubtitle] file: /boot/bootvideo.mkv

[container/text_srt.c:SrtGetSubtitle] folder: /boot

[container/text_srt.c:SrtGetSubtitle] ext: mkv

[container/text_srt.c:SrtGetSubtitle] basename: bootvideo

[container/text_srt.c:SrtGetSubtitle] /boot/bootvideo

/boot | bootvideo | mkv

[container/text_srt.c:SrtGetSubtitle] <

[container/text_srt.c:Command] ret = 0

[container/text_ssa.c:Command]

[container/text_ssa.c:SsaGetSubtitle]

[container/text_ssa.c:SsaGetSubtitle] file: /boot/bootvideo.mkv

[container/text_ssa.c:SsaGetSubtitle] folder: /boot

[container/text_ssa.c:SsaGetSubtitle] ext: mkv

[container/text_ssa.c:SsaGetSubtitle] basename: bootvideo

[container/text_ssa.c:SsaGetSubtitle] /boot/bootvideo

/boot | bootvideo | mkv

[container/text_ssa.c:SsaGetSubtitle] <

[container/text_ssa.c:Command] ret = 0

[container/container_ass.c:container_ass_init] >

[container/container_ass.c:container_ass_init] width 0, height 0, share 1,

fd -1

[ass] Fontconfig disabled, only default font will be used.

container/container.c::Command

container/container.c::selectContainer

Selected Container: FFMPEG

[container/container_ffmpeg.c:container_ffmpeg_init] >

[container/container_ffmpeg.c:container_ffmpeg_init] filename

file:///boot/bootvideo.mkv

mount: mounting LABEL=RECORD on /hdd failed: No such file or directory

Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'file:///boot/bootvideo.mkv':

Metadata:

major_brand : mp42

minor_version : 0

compatible_brands: mp42mp41

creation_time : 2013-10-27 23:54:52

Duration: 00:00:08.04, start: 0.033367, bitrate: 787 kb/s

Stream #0:0(eng): Video: h264 (avc1 / 0x31637661), yuv420p, 1280x720

[SAR 1:1 DAR 16:9], 777 kb/s, 29.97 fps, 29.97 tbr, 30k tbn, 59.94 tbc

Metadata:

creation_time : 2013-10-27 23:54:52

handler_name : ?Mainconcept Video Media Handler

[container/container_ffmpeg.c:container_ffmpeg_update_tracks] number

streams 1

Codec ID: 28 (0000001c)

[container/container_ffmpeg.c:container_ffmpeg_update_tracks] 0. encoding =

V_MPEG4/ISO/AVC - version 0

[container/container_ffmpeg.c:container_ffmpeg_update_tracks]

CODEC_TYPE_VIDEO 0

[container/container_ffmpeg.c:container_ffmpeg_update_tracks] frame_rate =

29.970030

[container/container_ffmpeg.c:container_ffmpeg_update_tracks] bit_rate =

777256

[container/container_ffmpeg.c:container_ffmpeg_update_tracks] flags = 0

[container/container_ffmpeg.c:container_ffmpeg_update_tracks] frame_bits =

0

[container/container_ffmpeg.c:container_ffmpeg_update_tracks] time_base.den

30000

[container/container_ffmpeg.c:container_ffmpeg_update_tracks] time_base.num

1

[container/container_ffmpeg.c:container_ffmpeg_update_tracks] frame_rate

30000

[container/container_ffmpeg.c:container_ffmpeg_update_tracks] TimeScale

1001

[container/container_ffmpeg.c:container_ffmpeg_update_tracks] frame_rate

29970

[container/container_ffmpeg.c:container_ffmpeg_update_tracks] TimeScale

1000

[playback/playback.c:PlaybackOpen] exiting with value 0

Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'file:///boot/bootvideo.mkv':

Metadata:

major_brand : mp42

minor_version : 0

compatible_brands: mp42mp41

creation_time : 2013-10-27 23:54:52

Duration: 00:00:08.04, start: 0.033367, bitrate: 787 kb/s

Stream #0:0(eng): Video: h264 (avc1 / 0x31637661), yuv420p, 1280x720

[SAR 1:1 DAR 16:9], 777 kb/s, 29.97 fps, 29.97 tbr, 30k tbn, 59.94 tbc

Metadata:

creation_time : 2013-10-27 23:54:52

handler_name : ?Mainconcept Video Media Handler

[container/container_ffmpeg.c:container_ffmpeg_update_tracks] number

streams 1

Codec ID: 28 (0000001c)

[container/container_ffmpeg.c:container_ffmpeg_update_tracks] 0. encoding =

V_MPEG4/ISO/AVC - version 0

[container/container_ffmpeg.c:container_ffmpeg_update_tracks]

CODEC_TYPE_VIDEO 0

[container/container_ffmpeg.c:container_ffmpeg_update_tracks] frame_rate =

29.970030

[container/container_ffmpeg.c:container_ffmpeg_update_tracks] bit_rate =

777256

[container/container_ffmpeg.c:container_ffmpeg_update_tracks] flags = 0

[container/container_ffmpeg.c:container_ffmpeg_update_tracks] frame_bits =

0

[container/container_ffmpeg.c:container_ffmpeg_update_tracks] time_base.den

30000

[container/container_ffmpeg.c:container_ffmpeg_update_tracks] time_base.num

1

[container/container_ffmpeg.c:container_ffmpeg_update_tracks] frame_rate

30000

[container/container_ffmpeg.c:container_ffmpeg_update_tracks] TimeScale

1001

[container/container_ffmpeg.c:container_ffmpeg_update_tracks] frame_rate

29970

[container/container_ffmpeg.c:container_ffmpeg_update_tracks] TimeScale

1000

Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'file:///boot/bootvideo.mkv':

Metadata:

major_brand : mp42

minor_version : 0

compatible_brands: mp42mp41

creation_time : 2013-10-27 23:54:52

Duration: 00:00:08.04, start: 0.033367, bitrate: 787 kb/s

Stream #0:0(eng): Video: h264 (avc1 / 0x31637661), yuv420p, 1280x720

[SAR 1:1 DAR 16:9], 777 kb/s, 29.97 fps, 29.97 tbr, 30k tbn, 59.94 tbc

Metadata:

creation_time : 2013-10-27 23:54:52

handler_name : ?Mainconcept Video Media Handler

[container/container_ffmpeg.c:container_ffmpeg_update_tracks] number

streams 1

Codec ID: 28 (0000001c)

[container/container_ffmpeg.c:container_ffmpeg_update_tracks] 0. encoding =

V_MPEG4/ISO/AVC - version 0

[container/container_ffmpeg.c:container_ffmpeg_update_tracks]

CODEC_TYPE_VIDEO 0

[container/container_ffmpeg.c:container_ffmpeg_update_tracks] frame_rate =

29.970030

[container/container_ffmpeg.c:container_ffmpeg_update_tracks] bit_rate =

777256

[container/container_ffmpeg.c:container_ffmpeg_update_tracks] flags = 0

[container/container_ffmpeg.c:container_ffmpeg_update_tracks] frame_bits =

0

[container/container_ffmpeg.c:container_ffmpeg_update_tracks] time_base.den

30000

[container/container_ffmpeg.c:container_ffmpeg_update_tracks] time_base.num

1

[container/container_ffmpeg.c:container_ffmpeg_update_tracks] frame_rate

30000

[container/container_ffmpeg.c:container_ffmpeg_update_tracks] TimeScale

1001

[container/container_ffmpeg.c:container_ffmpeg_update_tracks] frame_rate

29970

[container/container_ffmpeg.c:container_ffmpeg_update_tracks] TimeScale

1000

VideoTrack List

und - V_MPEG4/ISO/AVC

Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'file:///boot/bootvideo.mkv':

Metadata:

major_brand : mp42

minor_version : 0

compatible_brands: mp42mp41

creation_time : 2013-10-27 23:54:52

Duration: 00:00:08.04, start: 0.033367/etc/init.d/rcS: line 674: can't

create /dev/vfd: No such device or address

starting e2->

Invalid card number.

Invalid card number.

Usage: amixer <options> command



Available options:

-h,--help this help

-c,--card N select the card

-D,--device N select the device, default 'default'

-d,--debug debug mode

-n,--nocheck do not perform range checking

-v,--version print version of this program

-q,--quiet be quiet

-i,--inactive show also inactive controls

-a,--abstract L select abstraction level (none or basic)



Available commands:

scontrols show all mixer simple controls

scontents show contents of all mixer simple controls (default

command)

sset sID P set contents for one mixer simple control

sget sID get contents for one mixer simple control

controls show all controls for given card

contents show contents of all controls for given card

cset cID P set control contents for one control

cget cID get control contents for one control

, bitrate: 787 kb/s

Usage: amixer <options> command



Available options:

-h,--help this help

-c,--card N select the card

-D,--device N select the device, default 'default'

-d,--debug debug mode

-n,--nocheck do not perform range checking

-v,--version print version of this program

-q,--quiet be quiet

-i,--inactive show also inactive controls

-a,--abstract L select abstraction level (none or basic)



Available commands:

scontrols show all mixer simple controls

scontents show contents of all mixer simple controls (default

command)

sset sID P set contents for one mixer simple control

sget sID get contents for one mixer simple control

controls show all controls for given card

contents show contents of all controls for given card

cset cID P set control contents for one control

cget cID get control contents for one control

[set_was_timer_wakeup] error reading /etc/enigma2/timers.xml

[set_was_timer_wakeup] no timer aktiv

Stream #0:0(eng): Video: h264 (avc1 / 0x31637661), yuv420p, 1280x720

[SAR 1:1 DAR 16:9], 777 kb/s, 29.97 fps, 29.97 tbr, 30k tbn, 59.94 tbc

Metadata:

creation_time : 2013-10-27 23:54:52

handler_name : ?Mainconcept Video Media Handler

[container/container_ffmpeg.c:container_ffmpeg_update_tracks] number

streams 1

Codec ID: 28 (0000001c)

[container/container_ffmpeg.c:container_ffmpeg_update_tracks] 0. encoding =

V_MPEG4/ISO/AVC - version 0

[container/container_ffmpeg.c:container_ffmpeg_update_tracks]

CODEC_TYPE_VIDEO 0

[container/container_ffmpeg.c:container_ffmpeg_update_tracks] frame_rate =

29.970030

[container/container_ffmpeg.c:container_ffmpeg_update_tracks] bit_rate =

777256

[container/container_ffmpeg.c:container_ffmpeg_update_tracks] flags = 0

[container/container_ffmpeg.c:container_ffmpeg_update_tracks] frame_bits =

0

Setting up IP spoofing protection:

[container/container_ffmpeg.c:container_ffmpeg_update_tracks] time_base.den

30000

[container/container_ffmpeg.c:container_ffmpeg_update_tracks] time_base.num

1

[container/container_ffmpeg.c:container_ffmpeg_update_tracks] frame_rate

30000

[container/container_ffmpeg.c:container_ffmpeg_update_tracks] TimeScale

1001

[container/container_ffmpeg.c:container_ffmpeg_update_tracks] frame_rate

29970

[container/container_ffmpeg.c:container_ffmpeg_update_tracks] TimeScale

1000

manager/subtitle.c::ManagerList

manager/subtitle.c::ManagerList return (nil) (0 - 0)

Current Audio Track : -1

Current Video Track : 1 V_MPEG4/ISO/AVC und

Current Subtitle Track : -1

[output/linuxdvb.c:LinuxDvbOpen] v1 a0

[output/linuxdvb.c:LinuxDvbOpen] failed to open /dev/dvb/adapter0/video0 -

errno 19

[output/linuxdvb.c:LinuxDvbOpen] No such device

[playback/playback.c:PlaybackPlay]

[output/linuxdvb.c:LinuxDvbPlay] v1 a0

[playback/playback.c:PlaybackPlay] Created thread

[playback/playback.c:PlaybackPlay] clearing isCreationPhase!

[container/container_ffmpeg.c:container_ffmpeg_play]

[container/container_ffmpeg.c:container_ffmpeg_play] is Playing

[container/container_ffmpeg.c:container_ffmpeg_play] Created thread

[container/container_ffmpeg.c:container_ffmpeg_play] exiting with value 0

[playback/playback.c:PlaybackPlay] exiting with value 0

Control:

al: List audio tracks

ac: List current audio track

a[id] Select audio track

sl: List subtitles

sc: List current subtitle

s[id] Select subtitles

q: Stop

c: Continue

p: Pause

f: Increase speed (Fast forward) (stepwise)

b: Decrease speed (Fast reverse) (stepwise)

l: Print duration

j: Print current PTS

k[1,4,7]: Jump back [15,60,300] seconds

k[3,6,9]: Jump forward [15,60,300] seconds

i: Print Info

Control:

al: List audio tracks

ac: List current audio track

a[id] Select audio track

sl: List subtitles

sc: List current subtitle

s[id] Select subtitles

q: Stop

c: Continue

p: Pause

f: Increase speed (Fast forward) (stepwise)

b: Decrease speed (Fast reverse) (stepwise)

l: Print duration

j: Print current PTS

k[1,4,7]: Jump back [15,60,300] seconds

k[3,6,9]: Jump forward [15,60,300] seconds

i: Print Info

Control:

al: List audio tracks

ac: List current audio track

a[id] Select audio track

sl: List subtitles

sc: List current subtitle

s[id] Select subtitles

q: Stop

c: Continue

p: Pause

f: Increase speed (Fast forward) (stepwise)

b: Decrease speed (Fast reverse) (stepwise)

l: Print duration

j: Print current PTS

k[1,4,7]: Jump back [15,60,300] seconds

k[3,6,9]: Jump forward [15,60,300] seconds

i: Print Info

Control:

al: List audio tracks

ac: List current audio track

a[id] Select audio track

sl: List subtitles

sc: List current subtitle

s[id] Select subtitles

q: Stop

c: Continue

p: Pause

f: Increase speed (Fast forward) (stepwise)

b: Decrease speed (Fast reverse) (stepwise)

l: Print duration

j: Print current PTS

k[1,4,7]: Jump back [15,60,300] seconds

k[3,6,9]: Jump forward [15,60,300] seconds

i: Print Info

Control:

al: List audio tracks

ac: List current audio track

a[id] Select audio track

sl: List subtitles

sc: List current subtitle

s[id] Select subtitles

q: Stop

c: Continue

p: Pause

f: Increase speed (Fast forward) (stepwise)

b: Decrease speed (Fast reverse) (stepwise)

l: Print duration

j: Print current PTS

k[1,4,7]: Jump back [15,60,300] seconds

k[3,6,9]: Jump forward [15,60,300] seconds

i: Print Info

Control:

al: List audio tracks

ac: List current audio track

a[id] Select audio track

sl: List subtitles

sc: List current subtitle

s[id] Select subtitles

q: Stop

c: Continue

p: Pause

f: Increase speed (Fast forward) (stepwise)

b: Decrease speed (Fast reverse) (stepwise)

l: Print duration

j: Print current PTS

k[1,4,7]: Jump back [15,60,300] seconds

k[3,6,9]: Jump forward [15,60,300] seconds

i: Print Info

Control:

al: List audio tracks

ac: List current audio track

a[id] Select audio track

sl: List subtitles

sc: List current subtitle

s[id] Select subtitles

q: Stop

c: Continue

p: Pause

f: Increase speed (Fast forward) (stepwise)

b: Decrease speed (Fast reverse) (stepwise)

l: Print duration

j: Print current PTS

k[1,4,7]: Jump back [15,60,300] seconds

k[3,6,9]: Jump forward [15,60,300] seconds

i: Print Info

Control:

al: List audio tracks

ac: List current audio track

a[id] Select audio track

sl: List subtitles

sc: List current subtitle

s[id] Select subtitles

q: Stop

c: Continue

p: Pause

f: Increase speed (Fast forward) (stepwise)

b: Decrease speed (Fast reverse) (stepwise)

l: Print duration

j: Print current PTS

k[1,4,7]: Jump back [15,60,300] seconds

k[3,6,9]: Jump forward [15,60,300] seconds

i: Print Info

Control:

al: List audio tracks

ac: List current audio track

a[id] Select audio track

sl: List subtitles

sc: List current subtitle

s[id] Select subtitles

q: Stop

c: Continue

p: Pause

f: Increase speed (Fast forward) (stepwise)

b: Decrease speed (Fast reverse) (stepwise)

l: Print duration

j: Print current PTS

k[1,4,7]: Jump back [15,60,300] seconds

k[3,6,9]: Jump forward [15,60,300] seconds

i: Print Info

Control:

al: List audio tracks

ac: List current audio track

a[id] Select audio track

sl: List subtitles

sc: List current subtitle

s[id] Select subtitles

q: Stop

c: Continue

p: Pause

f: Increase speed (Fast forward) (stepwise)

b: Decrease speed (Fast reverse) (stepwise)

l: Print duration

j: Print current PTS

k[1,4,7]: Jump back [15,60,300] seconds

k[3,6,9]: Jump forward [15,60,300] seconds

i: Print Info

[morly]

OK - hab das mal in ne Codeumgebung gegben - sonst scrollen wir uns dumm...

Poste mal deine Bootargs, zusätzlich starte das Image aus dem Flash, ran mit Telnet und folgende Ausgabe posten:

fdisk -l; blkid; mount

[swissSolaris]

Ich hoffe das sind alle info's die Du wünscht, ist schon etwas länger her dass ich mich mit der UFS910 befasst habe.


ufs910:~# fw_printenv
boot_param_version=11

board=stb7100ref_27
bootdelay=1
autoload=n
bootargs=console=ttyAS0,115200 root=/dev/mtdblock3 mem=36m bigphysarea=1280 coprocessor_mem=2m@0x04000000,2m@0x04200000
filesize=FC0000
fileaddr=A4000000
bootdesc_default=0
stdin=serial
stdout=serial
stderr=serial
ipaddr=192.168.1.11
serverip=192.168.1.10
gateway=192.168.1.1
gatewayip=192.168.1.1
ethaddr=00:50:FD:FF:56:3E
netmask=255.255.255.0
bootcmd=bootm a0040000
bootdesc_0=----Flash----
bootcmd_0=run bootargs_0; bootm a0040000
bootargs_0=set bootargs console=ttyAS0,115200 root=/dev/mtdblock2 ip=192.168.1.11:192.168.1.10:192.168.1.1:255.255.2 55.0:kathrein:eth0:off mem=64m coprocessor_mem=4m@0x10000000,4m@0x10400000 rootdelay=0 nwhwconf=device:eth0,hwaddr:00:50:FD:FF:56:3E init=/bin/devinit
bootdesc_9=-USB-1-Speed-
bootcmd_9=run bootargs_9; bootm a0040000
bootargs_9=set bootargs console=ttyAS0,115200 root=/dev/sda2 rw ip=192.168.1.11:192.168.1.10:192.168.1.1:255.255.2 55.0:kathrein:eth0:off mem=64m coprocessor_mem=4m@0x10000000,4m@0x10400000 rootdelay=6 nwhwconf=device:eth0,hwaddr:00:50:FD:FF:56:3E init=/bin/devinit
bootdesc_8=----USB-2----
bootcmd_8=usb reset;ext2load usb 0:3 a5000000 /boot/uImage;run bootargs_8;bootm a5000000
bootargs_8=set bootargs console=ttyAS0,115200 root=/dev/sda3 rw ip=192.168.1.11:192.168.1.10:192.168.1.1:255.255.2 55.0:kathrein:eth0:off mem=64m coprocessor_mem=4m@0x10000000,4m@0x10400000 rootdelay=6 nwhwconf=device:eth0,hwaddr:00:50:FD:FF:56:3E init=/bin/devinit
bootdesc_7=----USB-3----
bootcmd_7=usb reset;ext2load usb 0:4 a5000000 /boot/uImage;run bootargs_7;bootm a5000000
bootargs_7=set bootargs console=ttyAS0,115200 root=/dev/sda4 rw ip=192.168.1.11:192.168.1.10:192.168.1.1:255.255.2 55.0:kathrein:eth0:off mem=64m coprocessor_mem=4m@0x10000000,4m@0x10400000 rootdelay=6 nwhwconf=device:eth0,hwaddr:00:50:FD:FF:56:3E init=/bin/devinit
bootmenutimeout=2
ufs910:~#


ufs910:~# cat /proc/mtd
dev: size erasesize name
mtd0: 00020000 00010000 "Boot firmware"
mtd1: 00190000 00010000 "Kernel - RAW"
mtd2: 00a50000 00010000 "ROOT - SQUASHFS"
mtd3: 003e0000 00010000 "Var - JFFS2"
mtd4: 00010000 00010000 "BootConfiguration"
mtd5: 00fc0000 00010000 "Full w/o BL"
mtd6: 00010000 00010000 "MiniUboot - RAW"
ufs910:~#


ufs910:~# fdisk -l; blkid; mount

Disk /dev/sda: 7747 MB, 7747397632 bytes
255 heads, 63 sectors/track, 941 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

Device Boot Start End Blocks Id System
/dev/sda1 1 235 1887606 b Win95 FAT32
/dev/sda2 236 470 1887637+ 83 Linux
/dev/sda3 471 705 1887637+ 83 Linux
/dev/sda4 706 940 1887637+ 83 Linux
/dev/mtdblock2: TYPE="squashfs"
/dev/sda1: LABEL="SWAP" UUID="5288-B8BE" TYPE="vfat"
/dev/sda2: LABEL="MINI1" UUID="6fa79898-5ed4-47ee-b39c-9b4a2335c5f1" TYPE="ext3"
/dev/sda3: LABEL="MINI2" UUID="bba8d387-03e6-4a73-b2bd-f5a51b4da402" TYPE="ext3"
/dev/sda4: LABEL="MINI3" UUID="6283df28-96c4-4d2f-8caa-599a6521a21b" TYPE="ext3"
/dev/ramzswap0: TYPE="swap"
rootfs on / type rootfs (rw)
/dev/root on / type squashfs (ro,relatime)
proc on /proc type proc (rw,relatime)
/dev/mtdblock3 on /var type jffs2 (rw,noatime,nodiratime)
/dev/mtdblock3 on /etc type jffs2 (rw,noatime,nodiratime)
sysfs on /sys type sysfs (rw,relatime)
tmpfs on /ram type tmpfs (rw,relatime)
/dev/root on /dev.static type squashfs (ro,relatime)
tmpfs on /dev type tmpfs (rw,relatime)
devpts on /dev/pts type devpts (rw,relatime,gid=5,mode=620)
tmpfs on /dev/shm type tmpfs (rw,relatime)
usbfs on /proc/bus/usb type usbfs (rw,relatime)
tmpfs on /tmp type tmpfs (rw,relatime)
/dev/sda1 on /swap type vfat (rw,noatime,nodiratime,fmask=0022,dmask=0022,codep age=cp437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/sda1 on /var/epg type vfat (rw,noatime,nodiratime,fmask=0022,dmask=0022,codep age=cp437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/sda1 on /usr/local/share/neutrino/icons/logo type vfat (rw,noatime,nodiratime,fmask=0022,dmask=0022,codep age=cp437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/sda1 on /var/emu type vfat (rw,noatime,nodiratime,fmask=0022,dmask=0022,codep age=cp437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/sda1 on /var/keys type vfat (rw,noatime,nodiratime,fmask=0022,dmask=0022,codep age=cp437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/sda2 on /tmp/mnt/MINI1 type ext3 (rw,noatime,nodiratime,errors=continue,data=writeb ack)
/dev/sda3 on /tmp/mnt/MINI2 type ext3 (rw,noatime,nodiratime,errors=continue,data=writeb ack)
/dev/sda4 on /tmp/mnt/MINI3 type ext3 (rw,noatime,nodiratime,errors=continue,data=writeb ack)
ufs910:~#

[morly]

ok - passt mal, noch was:
auf welcher Partition hast das Image installiert?

[swissSolaris]

Habe es auf folgender installiert


/dev/sda2: LABEL="MINI1" UUID="6fa79898-5ed4-47ee-b39c-9b4a2335c5f1" TYPE="ext3"

Habe folgende Anleitung gewählt zum installieren : Link (http://www.hdmedia-universe.com/board/showthread.php?2529-USB-Flash-Anleitung&p=27214&viewfull=1#post27214)

[morly]

sda2 ist bei deinen bootargs noch als "Speed-Boot" konfiguriert, installier mal auf sda3 oder sda4 und boote entsprechend ---USB-3--- oder ---USB-4---
Wenn das läuft können wir noch die Bootargs anpassen

[swissSolaris]

Leider kein Erfolg dass gleich wie wenn es auf MINI1 drauf ist, soll ich mal ein anderes Image nehmen eine ältere Version ?

[morly]

OK - mal langsam...
du hast das Image auf sda3 installiert (also entpackt)...
Dann Box abschalten und loggen starten - nachdem "Kathrein UFS910" im Display steht die Cursor runter drücken bis ---USB-2---" im Display steht, dann OK drücken.

1) was passiert?
2) bitte von genau diesem Vorgang ein ser. Log erstellen und posten

[swissSolaris]

Okay hier alles was ich gemacht habe.


marcels-macbook:Downloads solaris$ ftp 192.168.253.238
Connected to 192.168.253.238.
220 Welcome to the vsftp daemon.
Name (192.168.253.238:solaris): root
331 Please specify the password.
Password:
230 Login successful.
Remote system type is UNIX.
Using binary mode to transfer files.
ftp> cd /tmp/mnt/MINI2
250 Directory successfully changed.
ftp> put HDMU_11684_E2_ufs910_209_git_5569_nodebug_mix_USB. tar.gz
local: HDMU_11684_E2_ufs910_209_git_5569_nodebug_mix_USB. tar.gz remote: HDMU_11684_E2_ufs910_209_git_5569_nodebug_mix_USB. tar.gz
229 Entering Extended Passive Mode (|||33537|).
150 Ok to send data.
100% |************************************************* ************************************************** ***********************************| 38804 KiB 1.48 MiB/s 00:00 ETA
226 Transfer complete.
39735966 bytes sent in 00:25 (1.48 MiB/s)
ftp> quit
221 Goodbye.
marcels-macbook:Downloads solaris$ telnet 192.168.253.238
Trying 192.168.253.238...
Connected to ufs910.fritz.box.
Escape character is '^]'.

:::::::::::::::::::::::::::::::::::::::::::::::::: ::::::::::::::::::::::::
: :
: o o ooooo ooooo o o oooo ooooo o ooooo :
: o o o o o o o o o o o o o :
: oo ooooo o ooooo oooo oooo o o o :
: o o o o o o o o o o o o o :
: o o o o o o o o o ooooo o o o :
: :
: UFS-910 - Kernel 2.6.32.59_stm24_0211 (17:22:56) :
: :
: Willkommen beim Neutrino-Image -- BPanther MOD :
:::::::::::::::::::::::::::::::::::::::::::::::::: ::::::::::::::::::::::::

ufs910 login: root


BusyBox v1.20.2 (2013-11-14 23:21:18 CET) built-in shell (ash)
Enter 'help' for a list of built-in commands.

ufs910:~# cd /tmp/mnt/MINI2
ufs910:/tmp/mnt/MINI2# tar zxf HDMU_11684_E2_ufs910_209_git_5569_nodebug_mix_USB. tar.gz .
ufs910:/tmp/mnt/MINI2# ll
drwxrwxr-x 22 1000 1000 4096 Nov 17 17:26 .
drwxr-xr-x 5 root root 100 Jan 1 2000 ..
-rw-r--r-- 1 root root 39735966 Nov 17 17:22 HDMU_11684_E2_ufs910_209_git_5569_nodebug_mix_USB. tar.gz
drwxrwxr-x 2 1000 1000 4096 Nov 13 01:10 autofs
drwxr-xr-x 2 1000 1000 4096 Nov 17 17:26 bin
drwxr-xr-x 2 1000 1000 4096 Nov 17 17:26 boot
drwxr-xr-x 2 1000 1000 4096 Nov 17 17:26 dev
drwxr-xr-x 2 1000 1000 4096 Nov 13 01:10 dev.static
drwxr-xr-x 11 1000 1000 4096 Nov 17 17:26 etc
lrwxrwxrwx 1 root root 10 Nov 17 17:26 hdd -> /media/hdd
drwxr-xr-x 7 1000 1000 4096 Nov 17 17:26 lib
drwx------ 2 root root 16384 Nov 17 17:17 lost+found
drwxr-xr-x 7 1000 1000 4096 Nov 17 17:26 media
drwxr-xr-x 5 1000 1000 4096 Nov 17 17:26 mnt
drwxr-xr-x 2 1000 1000 4096 Nov 13 01:10 proc
drwxr-xr-x 2 1000 1000 4096 Nov 13 01:10 ram
drwxr-xr-x 2 1000 1000 4096 Nov 13 01:10 root
drwxr-xr-x 2 1000 1000 4096 Nov 17 17:26 sbin
drwxr-xr-x 2 1000 1000 4096 Nov 13 01:10 share
drwxrwxr-x 2 1000 1000 4096 Nov 13 01:10 swap
drwxr-xr-x 2 1000 1000 4096 Nov 13 01:10 sys
drwxr-xr-x 2 1000 1000 4096 Nov 13 01:10 tmp
drwxr-xr-x 11 1000 1000 4096 Nov 17 17:25 usr
drwxr-xr-x 5 1000 1000 4096 Nov 17 17:25 var
ufs910:/tmp/mnt/MINI2#

Danach Power Off, 10 Sekunden gewartet und Power On mit Serial Console.


maxiU-Boot 1.3.1 (May 19 2010 - 23:02:55) - by SoLaLa

DRAM: 64 MB
Flash: 16 MB
In: serial
Out: serial
Err: serial
selected Image to start: ----Flash----
selected Image to start: Kathrein UFS910
selected Image to start: -USB-1-Speed-
selected Image to start: ----USB-2----
Hit any key to stop autoboot: 0
USB0 Kingston 001485333C5EFCA1A7CE2678
loading from usb 0:3
## Booting image at a5000000 ...
Bad Magic Number
STB7100-REF>

----------------------------------------------------------------------------------------

maxiU-Boot 1.3.1 (May 19 2010 - 23:02:55) - by SoLaLa

DRAM: 64 MB
Flash: 16 MB
In: serial
Out: serial
Err: serial
selected Image to start: ----Flash----
selected Image to start: Kathrein UFS910
selected Image to start: -USB-1-Speed-
selected Image to start: ----USB-2----
selected Image to start: ----USB-3----
Hit any key to stop autoboot: 0
USB0 Kingston 001485333C5EFCA1A7CE2678
loading from usb 0:4
## Booting image at a5000000 ...
Bad Magic Number
STB7100-REF>

Hoffe dass hilft Dir so.

[morly]

Ja hilft - "bad magic number"...
formatiere die Part folgendermassen:



mkfs.ext2 -I128 -b4096 /dev/sda3

[swissSolaris]

Okay hat auch nicht viel gebracht, ausser dass Sie nun ab USB2 Bootet aber weit kommt Sie nicht.


maxiU-Boot 1.3.1 (May 19 2010 - 23:02:55) - by SoLaLa

DRAM: 64 MB
Flash: 16 MB
In: serial
Out: serial
Err: serial
selected Image to start: ----Flash----
selected Image to start: Kathrein UFS910
selected Image to start: -USB-1-Speed-
selected Image to start: ----USB-2----
Hit any key to stop autoboot: 0
USB0 Kingston 001485333C5EFCA1A7CE2678
loading from usb 0:3

1639058 bytes read
## Booting image at a5000000 ...
Image Name: Linux-2.6.32.46_stm24_0209
Image Type: SuperH Linux Kernel Image (gzip compressed)
Data Size: 1638994 Bytes = 1.6 MB
Load Address: 84001000
Entry Point: 84002000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK

Starting kernel console=ttyAS0,115200 root=/dev/sda3 rw ip=192.168.1.11:192.168.1.10:192.168.1.1:255.255.2 55.0:kathrein:eth0:off mem=64m coprocessor_mem=4m@0x10000000,4m@0x10400000 rootdelay=6 nwhwconf=device:eth0,hwaddr:00:50:FD:FF:56:3E init=/bin/devinit - 0x00000000 - 0 ...

[morly]

fehlt da was im log?
wo steckt der stick?
kannst einen anderen stick partitionieren/formatieren/testen?

[swissSolaris]

Nein mehr stand nicht im Log, der Stick ist hinten unten dran. Ich werde mir morgen einen neuen Stick besorgen und dann Feedback geben. Danke schon mals für die Hilfe.

[morly]

by the way - gerade für die UFS910 empfehle ich die das Admin Tool - für diese Box habe ich begonnen das Tool zu schreiben ;)

[Anskar]

Und das funktioniert genial!
MfG