ciccio81
27.12.2013, 11:18
HDMU_11809_E2_at7500_209_git_5570_nodebug_mix_USB
werden keine video einstellungen angezeigt beim ertassistent
lose frontend 0
opening frontend 1
frontend successfully opened
close frontend 1
found 1 adapter, 2 frontends(2 sim) and 3 demux, boxtype 30
RTC not ready... wait for transponder time
[EPGC] Initialized EPGCache (wait for setCacheFile call now)
Loading spinners...
[ePNG] couldn't open /usr/local/share/enigma2/skin_default/spinner/wait13.png
found 12 spinner!
executing main
setIoPrio best-effort level 3 ok
no profile data available
main thread is non-idle! display spinner!
Failed to open /dev/dbox/fp0
[Harddisk] enumerating block devices...
new Harddisk sda -> /dev/sda -> /dev/sda
[ePopen] command: ('sdparm', 'sdparm', '--set=SCT=0', '/dev/sda')
[ePopen] command: ('sdparm', 'sdparm', '-C stop', '/dev/sda')
new Harddisk sdb -> /dev/sdb -> /dev/sdb
Reading satellites.xml
sec config cleared
setSlotInfo for dvb frontend 0 to slotid 0, descr Availink AVL2108 DVB-S2, need rotorworkaround No, enabled Yes, DVB-S2 Yes
setSlotInfo for dvb frontend 1 to slotid 1, descr Availink AVL2108 DVB-S2, need rotorworkaround No, enabled Yes, DVB-S2 Yes
slot: 0 configmode: simple
diseqcmode: single
slot: 1 configmode: simple
diseqcmode: diseqc_a_b
sec config completed
[InfoBar] Failed to load resumepoints: [Errno 2] No such file or directory: '/etc/enigma2/resumepoints.pkl'
[FONT] adding font /usr/local/share/fonts/nmsbd.ttf...OK (Regular)
[FONT] adding font /usr/local/share/fonts/andale.ttf...OK (Fixed)
[FONT] adding font /usr/local/share/fonts/goodtime.ttf...OK (Crs)
[FONT] adding font /usr/local/share/fonts/age.ttf...OK (Age)
[FONT] adding font /usr/local/share/fonts/tuxtxt.ttf...OK (Console)
[FONT] adding font /usr/local/share/fonts/time.ttf...OK (BMCTime)
[FONT] adding font /usr/local/share/fonts/ae_AlMateen.ttf...OK (Replacement)
3660kB available for acceleration surfaces.
resolution: 1280 x 720 x 32 (stride: 5120)
[FONT] adding font /usr/share/fonts/md_khmurabi_10.ttf...OK (Regular)
[FONT] adding font /usr/share/fonts/valis_lcd.ttf...OK (Digital)
[FONT] adding font /usr/local/share/fonts/valis_enigma.ttf...OK (Subs)
[FONT] adding font /usr/local/share/fonts/nmsbd.ttf...OK (FdLcD)
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropriate ioctl for device >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/event3' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse3' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js3' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/event2' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse2' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js2' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/event1' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse1' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js1' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 22] Invalid argument >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse0' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js0' >
Selected keymap does not exist!
Activating language English
[ePopen] command: ip -o addr show dev eth0
eDBoxLCD::getInstance
[WebInterface] set language to en
[WebInterface] set language to en
[WebInterface] fallback to default translation for Webinterface
[WebInterface] fallback to default translation for Configuration for the Webinterface
[eSocketMMIHandler] created successfully
getModeList for port Component
getModeList for port Scart
getModeList for port HDMI
getModeList for port HDMI-PC
hotplug on dvi
-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
setMode - port: Component mode: 720p rate: 50Hz
-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
updateColor: Component
LINE # automatically generated by enigma 2
LINE
[AutoMount.py] self.automounts without mounts {}
[NetworkBrowser] fallback to default translation for NetworkBrowser
[NetworkBrowser] fallback to default translation for Search for network shares
[NetworkBrowser] fallback to default translation for MountManager
[NetworkBrowser] fallback to default translation for Manage network shares
adding Resource DiseqcTester
resources: {'DiseqcTester': <function DiseqcTesterMain at 0x164ebfc>}
starting hotplug handler
[Toplevel.importExternalModules] Imported external module: Example
[Webinterface].installCertificates :: Generating SSL key pair and CACert
[Webinterface].installCertificates :: Signing SSL key pair with new CACert
[Webinterface].installCertificates :: Installing newly generated certificate and key pair
[HTTPRootResource}.__init__
[Webinterface] started on 0.0.0.0:80 auth=False ssl=False
[WebInterface.registerBonjourService] No module named Bonjour.Bonjour
[HTTPRootResource}.__init__
[Webinterface] started on 0.0.0.0:443 auth=True ssl=True
[WebInterface.registerBonjourService] No module named Bonjour.Bonjour
[EPGC] setCacheFile read/write epg data from/to '/hdd/epg.dat'
Reading ['/usr/lib/enigma2/python/Plugins/SystemPlugins/Videomode/videowizard.xml']
getStepWithID: start
result: nothing
('en_EN', ('English', 'en', 'EN'))
++++++++++++***++**** VideoWizard-createSummary
Updating values in step 1
set LCD text
wizard step: {'code': u'self["portpic"].show()\nself.clearSelectedKeys()\nself.selectKey("OK")', 'text': 'Video input selection\n\nPlease press OK if you can see this page on your TV (or select a different input port).\n\nThe next input port will be automatically probed in 20 seconds.', 'displaytext': 'Select video input with up/down buttons', 'id': 'inputselection', 'condition': '', 'listevaluation': u'inputSelectionMade', 'timeoutaction': 'selectnext', 'nextstep': 'modeselection', 'code_async': '', 'codeafter_async': '', 'timeoutstep': '', 'list': [], 'onselect': u'inputSelectionMoved', 'dynamiclist': u'listInputChannels', 'timeout': 20, 'codeafter': '', 'config': {'screen': None, 'args': None, 'type': ''}}
wizard text Video input selection
Please press OK if you can see this page on your TV (or select a different input port).
The next input port will be automatically probed in 20 seconds.
set LCD text
code self["portpic"].show()
self.clearSelectedKeys()
self.selectKey("OK")
selectPic: arrowdown
showing list, 1
self.list: <Components.Sources.List.List object at 0x167484c>
self.list: <Components.Sources.List.List object at 0x167484c>
self.list: <Components.Sources.List.List object at 0x167484c>
self.list: <Components.Sources.List.List object at 0x167484c>
self.list: <Components.Sources.List.List object at 0x167484c>
self.list: <Components.Sources.List.List object at 0x167484c>
setZPosition
dynamic list, calling listInputChannels
listInputChannels: [('Component', 'Component'), ('HDMI', 'HDMI'), ('HDMI-PC', 'HDMI-PC'), ('Scart', 'Scart')]
self.selection: Component
input selection moved: Component
inputSelect: Component
getModeList for port Component
modeList: [('720p', ['50Hz', '60Hz']), ('1080p', ['60Hz', '50Hz', '23Hz', '30Hz', '29Hz', '24Hz', '25Hz']), ('1080i', ['50Hz', '60Hz']), ('576p', ['50Hz']), ('576i', ['50Hz'])]
modes for port Component and mode 720p
getModeList for port Component
('720p', ['50Hz', '60Hz'])
('1080p', ['60Hz', '50Hz', '23Hz', '30Hz', '29Hz', '24Hz', '25Hz'])
('1080i', ['50Hz', '60Hz'])
('576p', ['50Hz'])
('576i', ['50Hz'])
setMode - port: Component mode: 720p rate: 50Hz
-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
updateColor: Component
[ePNG] couldn't open /usr/lib/enigma2/python/Plugins/SystemPlugins/Videomode/Component.png
ePixmap::setPixmapFromFile: loadPNG failed
self.selection: Component
input selection moved: Component
inputSelect: Component
getModeList for port Component
modeList: [('720p', ['50Hz', '60Hz']), ('1080p', ['60Hz', '50Hz', '23Hz', '30Hz', '29Hz', '24Hz', '25Hz']), ('1080i', ['50Hz', '60Hz']), ('576p', ['50Hz']), ('576i', ['50Hz'])]
modes for port Component and mode 720p
getModeList for port Component
('720p', ['50Hz', '60Hz'])
('1080p', ['60Hz', '50Hz', '23Hz', '30Hz', '29Hz', '24Hz', '25Hz'])
('1080i', ['50Hz', '60Hz'])
('576p', ['50Hz'])
('576i', ['50Hz'])
setMode - port: Component mode: 720p rate: 50Hz
-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
updateColor: Component
[ePNG] couldn't open /usr/lib/enigma2/python/Plugins/SystemPlugins/Videomode/Component.png
ePixmap::setPixmapFromFile: loadPNG failed
self.selection: Component
input selection moved: Component
inputSelect: Component
getModeList for port Component
modeList: [('720p', ['50Hz', '60Hz']), ('1080p', ['60Hz', '50Hz', '23Hz', '30Hz', '29Hz', '24Hz', '25Hz']), ('1080i', ['50Hz', '60Hz']), ('576p', ['50Hz']), ('576i', ['50Hz'])]
modes for port Component and mode 720p
getModeList for port Component
('720p', ['50Hz', '60Hz'])
('1080p', ['60Hz', '50Hz', '23Hz', '30Hz', '29Hz', '24Hz', '25Hz'])
('1080i', ['50Hz', '60Hz'])
('576p', ['50Hz'])
('576i', ['50Hz'])
setMode - port: Component mode: 720p rate: 50Hz
-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
updateColor: Component
[ePNG] couldn't open /usr/lib/enigma2/python/Plugins/SystemPlugins/Videomode/Component.png
ePixmap::setPixmapFromFile: loadPNG failed
showing config
setPixmapNum(1) failed! defined pixmaps: [<enigma.gPixmapPtr; proxy of <Swig Object of type 'ePtr< gPixmap > *' at 0x16b2338> >]
setValue 50
Setvolume: 50 50 (raw)
Setvolume: 32 32 (-1db)
child has terminated
pipes closed
[ePopen] command: route -n | grep eth0
child has terminated
pipes closed
child has terminated
pipes closed
poll: unhandled POLLERR/HUP/NVAL for fd 32(17)
poll: unhandled POLLERR/HUP/NVAL for fd 35(17)
poll: unhandled POLLERR/HUP/NVAL for fd 36(16)
child has terminated
pipes closed
192.168
0.0.0.0
nameservers: [[192, 168, 178, 1]]
read configured interface: {'lo': {'dhcp': False}, 'wlan0': {'dhcp': True}, 'eth0': {'dhcp': True}}
self.ifaces after loading: {'eth0': {'preup': False, 'predown': False, 'ip': [192, 168, 178, 57], 'up': True, 'mac': '00:1e:b8:04:19:b6', 'dhcp': True, 'bcast': [192, 168, 178, 255], 'netmask': [255, 255, 255, 0], 'gateway': [192, 168, 178, 1]}}
poll: unhandled POLLERR/HUP/NVAL for fd 38(16)
timeoutCounter: 19
timeoutCounter: 18
timeoutCounter: 17
timeoutCounter: 16
timeoutCounter: 15
timeoutCounter: 14
timeoutCounter: 13
timeoutCounter: 12
timeoutCounter: 11
timeoutCounter: 10
timeoutCounter: 9
timeoutCounter: 8
timeoutCounter: 7
timeoutCounter: 6
timeoutCounter: 5
timeoutCounter: 4
timeoutCounter: 3
timeoutCounter: 2
timeoutCounter: 1
timeoutCounter: 0
selection next item
self.selection: HDMI
input selection moved: HDMI
inputSelect: HDMI
getModeList for port HDMI
modeList: [('720p', ['50Hz', '60Hz']), ('1080p', ['60Hz', '50Hz', '23Hz', '30Hz', '29Hz', '24Hz', '25Hz']), ('1080i', ['50Hz', '60Hz']), ('576p', ['50Hz']), ('576i', ['50Hz'])]
modes for port HDMI and mode 720p
getModeList for port HDMI
('720p', ['50Hz', '60Hz'])
('1080p', ['60Hz', '50Hz', '23Hz', '30Hz', '29Hz', '24Hz', '25Hz'])
('1080i', ['50Hz', '60Hz'])
('576p', ['50Hz'])
('576i', ['50Hz'])
setMode - port: HDMI mode: 720p rate: 50Hz
-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
updateColor: HDMI
self.selection: HDMI
input selection moved: HDMI
inputSelect: HDMI
getModeList for port HDMI
modeList: [('720p', ['50Hz', '60Hz']), ('1080p', ['60Hz', '50Hz', '23Hz', '30Hz', '29Hz', '24Hz', '25Hz']), ('1080i', ['50Hz', '60Hz']), ('576p', ['50Hz']), ('576i', ['50Hz'])]
modes for port HDMI and mode 720p
getModeList for port HDMI
('720p', ['50Hz', '60Hz'])
('1080p', ['60Hz', '50Hz', '23Hz', '30Hz', '29Hz', '24Hz', '25Hz'])
('1080i', ['50Hz', '60Hz'])
('576p', ['50Hz'])
('576i', ['50Hz'])
setMode - port: HDMI mode: 720p rate: 50Hz
-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
updateColor: HDMI
self.selection: HDMI
input selection moved: HDMI
inputSelect: HDMI
getModeList for port HDMI
modeList: [('720p', ['50Hz', '60Hz']), ('1080p', ['60Hz', '50Hz', '23Hz', '30Hz', '29Hz', '24Hz', '25Hz']), ('1080i', ['50Hz', '60Hz']), ('576p', ['50Hz']), ('576i', ['50Hz'])]
modes for port HDMI and mode 720p
getModeList for port HDMI
('720p', ['50Hz', '60Hz'])
('1080p', ['60Hz', '50Hz', '23Hz', '30Hz', '29Hz', '24Hz', '25Hz'])
('1080i', ['50Hz', '60Hz'])
('576p', ['50Hz'])
('576i', ['50Hz'])
setMode - port: HDMI mode: 720p rate: 50Hz
-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
updateColor: HDMI
current: ('HDMI', 'HDMI')
input selection moved: HDMI
inputSelect: HDMI
getModeList for port HDMI
modeList: [('720p', ['50Hz', '60Hz']), ('1080p', ['60Hz', '50Hz', '23Hz', '30Hz', '29Hz', '24Hz', '25Hz']), ('1080i', ['50Hz', '60Hz']), ('576p', ['50Hz']), ('576i', ['50Hz'])]
modes for port HDMI and mode 720p
getModeList for port HDMI
('720p', ['50Hz', '60Hz'])
('1080p', ['60Hz', '50Hz', '23Hz', '30Hz', '29Hz', '24Hz', '25Hz'])
('1080i', ['50Hz', '60Hz'])
('576p', ['50Hz'])
('576i', ['50Hz'])
setMode - port: HDMI mode: 720p rate: 50Hz
-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
updateColor: HDMI
down
werden keine video einstellungen angezeigt beim ertassistent
lose frontend 0
opening frontend 1
frontend successfully opened
close frontend 1
found 1 adapter, 2 frontends(2 sim) and 3 demux, boxtype 30
RTC not ready... wait for transponder time
[EPGC] Initialized EPGCache (wait for setCacheFile call now)
Loading spinners...
[ePNG] couldn't open /usr/local/share/enigma2/skin_default/spinner/wait13.png
found 12 spinner!
executing main
setIoPrio best-effort level 3 ok
no profile data available
main thread is non-idle! display spinner!
Failed to open /dev/dbox/fp0
[Harddisk] enumerating block devices...
new Harddisk sda -> /dev/sda -> /dev/sda
[ePopen] command: ('sdparm', 'sdparm', '--set=SCT=0', '/dev/sda')
[ePopen] command: ('sdparm', 'sdparm', '-C stop', '/dev/sda')
new Harddisk sdb -> /dev/sdb -> /dev/sdb
Reading satellites.xml
sec config cleared
setSlotInfo for dvb frontend 0 to slotid 0, descr Availink AVL2108 DVB-S2, need rotorworkaround No, enabled Yes, DVB-S2 Yes
setSlotInfo for dvb frontend 1 to slotid 1, descr Availink AVL2108 DVB-S2, need rotorworkaround No, enabled Yes, DVB-S2 Yes
slot: 0 configmode: simple
diseqcmode: single
slot: 1 configmode: simple
diseqcmode: diseqc_a_b
sec config completed
[InfoBar] Failed to load resumepoints: [Errno 2] No such file or directory: '/etc/enigma2/resumepoints.pkl'
[FONT] adding font /usr/local/share/fonts/nmsbd.ttf...OK (Regular)
[FONT] adding font /usr/local/share/fonts/andale.ttf...OK (Fixed)
[FONT] adding font /usr/local/share/fonts/goodtime.ttf...OK (Crs)
[FONT] adding font /usr/local/share/fonts/age.ttf...OK (Age)
[FONT] adding font /usr/local/share/fonts/tuxtxt.ttf...OK (Console)
[FONT] adding font /usr/local/share/fonts/time.ttf...OK (BMCTime)
[FONT] adding font /usr/local/share/fonts/ae_AlMateen.ttf...OK (Replacement)
3660kB available for acceleration surfaces.
resolution: 1280 x 720 x 32 (stride: 5120)
[FONT] adding font /usr/share/fonts/md_khmurabi_10.ttf...OK (Regular)
[FONT] adding font /usr/share/fonts/valis_lcd.ttf...OK (Digital)
[FONT] adding font /usr/local/share/fonts/valis_enigma.ttf...OK (Subs)
[FONT] adding font /usr/local/share/fonts/nmsbd.ttf...OK (FdLcD)
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropriate ioctl for device >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/event3' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse3' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js3' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/event2' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse2' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js2' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/event1' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse1' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js1' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 22] Invalid argument >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse0' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js0' >
Selected keymap does not exist!
Activating language English
[ePopen] command: ip -o addr show dev eth0
eDBoxLCD::getInstance
[WebInterface] set language to en
[WebInterface] set language to en
[WebInterface] fallback to default translation for Webinterface
[WebInterface] fallback to default translation for Configuration for the Webinterface
[eSocketMMIHandler] created successfully
getModeList for port Component
getModeList for port Scart
getModeList for port HDMI
getModeList for port HDMI-PC
hotplug on dvi
-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
setMode - port: Component mode: 720p rate: 50Hz
-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
updateColor: Component
LINE # automatically generated by enigma 2
LINE
[AutoMount.py] self.automounts without mounts {}
[NetworkBrowser] fallback to default translation for NetworkBrowser
[NetworkBrowser] fallback to default translation for Search for network shares
[NetworkBrowser] fallback to default translation for MountManager
[NetworkBrowser] fallback to default translation for Manage network shares
adding Resource DiseqcTester
resources: {'DiseqcTester': <function DiseqcTesterMain at 0x164ebfc>}
starting hotplug handler
[Toplevel.importExternalModules] Imported external module: Example
[Webinterface].installCertificates :: Generating SSL key pair and CACert
[Webinterface].installCertificates :: Signing SSL key pair with new CACert
[Webinterface].installCertificates :: Installing newly generated certificate and key pair
[HTTPRootResource}.__init__
[Webinterface] started on 0.0.0.0:80 auth=False ssl=False
[WebInterface.registerBonjourService] No module named Bonjour.Bonjour
[HTTPRootResource}.__init__
[Webinterface] started on 0.0.0.0:443 auth=True ssl=True
[WebInterface.registerBonjourService] No module named Bonjour.Bonjour
[EPGC] setCacheFile read/write epg data from/to '/hdd/epg.dat'
Reading ['/usr/lib/enigma2/python/Plugins/SystemPlugins/Videomode/videowizard.xml']
getStepWithID: start
result: nothing
('en_EN', ('English', 'en', 'EN'))
++++++++++++***++**** VideoWizard-createSummary
Updating values in step 1
set LCD text
wizard step: {'code': u'self["portpic"].show()\nself.clearSelectedKeys()\nself.selectKey("OK")', 'text': 'Video input selection\n\nPlease press OK if you can see this page on your TV (or select a different input port).\n\nThe next input port will be automatically probed in 20 seconds.', 'displaytext': 'Select video input with up/down buttons', 'id': 'inputselection', 'condition': '', 'listevaluation': u'inputSelectionMade', 'timeoutaction': 'selectnext', 'nextstep': 'modeselection', 'code_async': '', 'codeafter_async': '', 'timeoutstep': '', 'list': [], 'onselect': u'inputSelectionMoved', 'dynamiclist': u'listInputChannels', 'timeout': 20, 'codeafter': '', 'config': {'screen': None, 'args': None, 'type': ''}}
wizard text Video input selection
Please press OK if you can see this page on your TV (or select a different input port).
The next input port will be automatically probed in 20 seconds.
set LCD text
code self["portpic"].show()
self.clearSelectedKeys()
self.selectKey("OK")
selectPic: arrowdown
showing list, 1
self.list: <Components.Sources.List.List object at 0x167484c>
self.list: <Components.Sources.List.List object at 0x167484c>
self.list: <Components.Sources.List.List object at 0x167484c>
self.list: <Components.Sources.List.List object at 0x167484c>
self.list: <Components.Sources.List.List object at 0x167484c>
self.list: <Components.Sources.List.List object at 0x167484c>
setZPosition
dynamic list, calling listInputChannels
listInputChannels: [('Component', 'Component'), ('HDMI', 'HDMI'), ('HDMI-PC', 'HDMI-PC'), ('Scart', 'Scart')]
self.selection: Component
input selection moved: Component
inputSelect: Component
getModeList for port Component
modeList: [('720p', ['50Hz', '60Hz']), ('1080p', ['60Hz', '50Hz', '23Hz', '30Hz', '29Hz', '24Hz', '25Hz']), ('1080i', ['50Hz', '60Hz']), ('576p', ['50Hz']), ('576i', ['50Hz'])]
modes for port Component and mode 720p
getModeList for port Component
('720p', ['50Hz', '60Hz'])
('1080p', ['60Hz', '50Hz', '23Hz', '30Hz', '29Hz', '24Hz', '25Hz'])
('1080i', ['50Hz', '60Hz'])
('576p', ['50Hz'])
('576i', ['50Hz'])
setMode - port: Component mode: 720p rate: 50Hz
-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
updateColor: Component
[ePNG] couldn't open /usr/lib/enigma2/python/Plugins/SystemPlugins/Videomode/Component.png
ePixmap::setPixmapFromFile: loadPNG failed
self.selection: Component
input selection moved: Component
inputSelect: Component
getModeList for port Component
modeList: [('720p', ['50Hz', '60Hz']), ('1080p', ['60Hz', '50Hz', '23Hz', '30Hz', '29Hz', '24Hz', '25Hz']), ('1080i', ['50Hz', '60Hz']), ('576p', ['50Hz']), ('576i', ['50Hz'])]
modes for port Component and mode 720p
getModeList for port Component
('720p', ['50Hz', '60Hz'])
('1080p', ['60Hz', '50Hz', '23Hz', '30Hz', '29Hz', '24Hz', '25Hz'])
('1080i', ['50Hz', '60Hz'])
('576p', ['50Hz'])
('576i', ['50Hz'])
setMode - port: Component mode: 720p rate: 50Hz
-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
updateColor: Component
[ePNG] couldn't open /usr/lib/enigma2/python/Plugins/SystemPlugins/Videomode/Component.png
ePixmap::setPixmapFromFile: loadPNG failed
self.selection: Component
input selection moved: Component
inputSelect: Component
getModeList for port Component
modeList: [('720p', ['50Hz', '60Hz']), ('1080p', ['60Hz', '50Hz', '23Hz', '30Hz', '29Hz', '24Hz', '25Hz']), ('1080i', ['50Hz', '60Hz']), ('576p', ['50Hz']), ('576i', ['50Hz'])]
modes for port Component and mode 720p
getModeList for port Component
('720p', ['50Hz', '60Hz'])
('1080p', ['60Hz', '50Hz', '23Hz', '30Hz', '29Hz', '24Hz', '25Hz'])
('1080i', ['50Hz', '60Hz'])
('576p', ['50Hz'])
('576i', ['50Hz'])
setMode - port: Component mode: 720p rate: 50Hz
-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
updateColor: Component
[ePNG] couldn't open /usr/lib/enigma2/python/Plugins/SystemPlugins/Videomode/Component.png
ePixmap::setPixmapFromFile: loadPNG failed
showing config
setPixmapNum(1) failed! defined pixmaps: [<enigma.gPixmapPtr; proxy of <Swig Object of type 'ePtr< gPixmap > *' at 0x16b2338> >]
setValue 50
Setvolume: 50 50 (raw)
Setvolume: 32 32 (-1db)
child has terminated
pipes closed
[ePopen] command: route -n | grep eth0
child has terminated
pipes closed
child has terminated
pipes closed
poll: unhandled POLLERR/HUP/NVAL for fd 32(17)
poll: unhandled POLLERR/HUP/NVAL for fd 35(17)
poll: unhandled POLLERR/HUP/NVAL for fd 36(16)
child has terminated
pipes closed
192.168
0.0.0.0
nameservers: [[192, 168, 178, 1]]
read configured interface: {'lo': {'dhcp': False}, 'wlan0': {'dhcp': True}, 'eth0': {'dhcp': True}}
self.ifaces after loading: {'eth0': {'preup': False, 'predown': False, 'ip': [192, 168, 178, 57], 'up': True, 'mac': '00:1e:b8:04:19:b6', 'dhcp': True, 'bcast': [192, 168, 178, 255], 'netmask': [255, 255, 255, 0], 'gateway': [192, 168, 178, 1]}}
poll: unhandled POLLERR/HUP/NVAL for fd 38(16)
timeoutCounter: 19
timeoutCounter: 18
timeoutCounter: 17
timeoutCounter: 16
timeoutCounter: 15
timeoutCounter: 14
timeoutCounter: 13
timeoutCounter: 12
timeoutCounter: 11
timeoutCounter: 10
timeoutCounter: 9
timeoutCounter: 8
timeoutCounter: 7
timeoutCounter: 6
timeoutCounter: 5
timeoutCounter: 4
timeoutCounter: 3
timeoutCounter: 2
timeoutCounter: 1
timeoutCounter: 0
selection next item
self.selection: HDMI
input selection moved: HDMI
inputSelect: HDMI
getModeList for port HDMI
modeList: [('720p', ['50Hz', '60Hz']), ('1080p', ['60Hz', '50Hz', '23Hz', '30Hz', '29Hz', '24Hz', '25Hz']), ('1080i', ['50Hz', '60Hz']), ('576p', ['50Hz']), ('576i', ['50Hz'])]
modes for port HDMI and mode 720p
getModeList for port HDMI
('720p', ['50Hz', '60Hz'])
('1080p', ['60Hz', '50Hz', '23Hz', '30Hz', '29Hz', '24Hz', '25Hz'])
('1080i', ['50Hz', '60Hz'])
('576p', ['50Hz'])
('576i', ['50Hz'])
setMode - port: HDMI mode: 720p rate: 50Hz
-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
updateColor: HDMI
self.selection: HDMI
input selection moved: HDMI
inputSelect: HDMI
getModeList for port HDMI
modeList: [('720p', ['50Hz', '60Hz']), ('1080p', ['60Hz', '50Hz', '23Hz', '30Hz', '29Hz', '24Hz', '25Hz']), ('1080i', ['50Hz', '60Hz']), ('576p', ['50Hz']), ('576i', ['50Hz'])]
modes for port HDMI and mode 720p
getModeList for port HDMI
('720p', ['50Hz', '60Hz'])
('1080p', ['60Hz', '50Hz', '23Hz', '30Hz', '29Hz', '24Hz', '25Hz'])
('1080i', ['50Hz', '60Hz'])
('576p', ['50Hz'])
('576i', ['50Hz'])
setMode - port: HDMI mode: 720p rate: 50Hz
-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
updateColor: HDMI
self.selection: HDMI
input selection moved: HDMI
inputSelect: HDMI
getModeList for port HDMI
modeList: [('720p', ['50Hz', '60Hz']), ('1080p', ['60Hz', '50Hz', '23Hz', '30Hz', '29Hz', '24Hz', '25Hz']), ('1080i', ['50Hz', '60Hz']), ('576p', ['50Hz']), ('576i', ['50Hz'])]
modes for port HDMI and mode 720p
getModeList for port HDMI
('720p', ['50Hz', '60Hz'])
('1080p', ['60Hz', '50Hz', '23Hz', '30Hz', '29Hz', '24Hz', '25Hz'])
('1080i', ['50Hz', '60Hz'])
('576p', ['50Hz'])
('576i', ['50Hz'])
setMode - port: HDMI mode: 720p rate: 50Hz
-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
updateColor: HDMI
current: ('HDMI', 'HDMI')
input selection moved: HDMI
inputSelect: HDMI
getModeList for port HDMI
modeList: [('720p', ['50Hz', '60Hz']), ('1080p', ['60Hz', '50Hz', '23Hz', '30Hz', '29Hz', '24Hz', '25Hz']), ('1080i', ['50Hz', '60Hz']), ('576p', ['50Hz']), ('576i', ['50Hz'])]
modes for port HDMI and mode 720p
getModeList for port HDMI
('720p', ['50Hz', '60Hz'])
('1080p', ['60Hz', '50Hz', '23Hz', '30Hz', '29Hz', '24Hz', '25Hz'])
('1080i', ['50Hz', '60Hz'])
('576p', ['50Hz'])
('576i', ['50Hz'])
setMode - port: HDMI mode: 720p rate: 50Hz
-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
updateColor: HDMI
down