booting problem whit the new verssion of HDMU11809

[darius]

HI
I have upgrade the new verssion on my barryallen on my kathrein 910 ,but it dose not boot and it bagan to load then go to kathrein ufs 910 then stop and nothing happen more.
what can man to do? I wait över 20 minutes and nothing . I have 2 other img. on usb and them works fine only on HDMU it dose not boot.
used to be it works whit all 3 img. but now works on only 2 but not whit HUMU img. !

[morly]

no way to help in this way.
1) post your bootargs
2) post the telnet output of: fdisk -l
3) if possible make a serial log of the starting phase

[darius]

no way to help in this way.
1) post your bootargs
2) post the telnet output of: fdisk -l
3) if possible make a serial log of the starting phase
but when it dose not boot I can not contact the box and get any information.
or should I get these info when I boot the box from the flash img.? or what?

- - - Aktualisiert - - -

this is log from fhas img.


6.0.0_tested_by_AAF_Team
BA Device found on /dev/sda1
######## BootMenu started ########
9600
UP - selected 2 AAF_Server_ufs-USBg
UP - selected 1 AAF_M15000_GST_USB_
UP - selected 0 Flash
OK - booting 0 Flash
-------------------------------
--------------------------------------------
Barry Allen V0.6 by gutemine
--------------------------------------------
from: 3 images boot: 3 named: HDMU_11809
--------------------------------------------


1
gotkey: 1
1
gotkey: 1
1
gotkey: 1
1
gotkey: 1


datei /tmp/ba/ba/Flash/data/logo.raw nicht gefunden
bootmenu ende \n
Target Image directory /data/baroot/ba/ba/Flash not found, continue booting Flash

- - - Aktualisiert - - -

what should i write on telenet command to get those information?

- - - Aktualisiert - - -

BusyBox v1.2.1 (2007.10.12-18:30+0000) Built-in shell (ash)
Enter 'help' for a list of built-in commands.


# output of fdisk
/bin/sh: output: not found
# ifconfig
eth0 Link encap:Ethernet HWaddr 00:80:0F:11:70:00
inet addr:192.168.1.25 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:167 errors:0 dropped:0 overruns:0 frame:0
TX packets:401 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:15565 (15.2 KiB) TX bytes:110038 (107.4 KiB)


lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

- - - Aktualisiert - - -

# df
Filesystem 1k-blocks Used Available Use% Mounted on
/dev/mtdblock2 640 424 216 66% /config
/dev/mtdblock6 3840 3408 432 89% /data
/dev/sda1 243064 153228 77292 66% /tmp/usb/XBA (1-1)
/dev/sda2 243096 60456 170092 26% /tmp/usb/XSYS2 (1-2)
/dev/sda3 243096 56828 173720 25% /tmp/usb/XSYS3 (1-3)
/dev/sda4 243096 81064 149484 35% /tmp/usb/XSYS4 (1-4)
/dev/sda4 243096 81064 149484 35% /tmp/mnttmp
#

- - - Aktualisiert - - -

# ps
PID Uid VmSize Stat Command
1 root 108 S init
2 root SW< [ksoftirqd/0]
3 root SW< [events/0]
4 root SW< [khelper]
5 root SW< [kthread]
22 root SW< [kblockd/0]
25 root SW< [khubd]
27 root SW< [kseriod]
62 root SW [pdflush]
63 root SW [pdflush]
64 root SW [kswapd0]
65 root SW< [aio/0]
94 root SW< [ata/0]
96 root SW< [scsi_eh_0]
99 root SW [mtdblockd]
145 root SW< [scsi_eh_1]
146 root SW< [usb-storage]
150 root SW< [pegasus]
182 root SWN [jffs2_gcd_mtd2]

[morly]

any reason why you don't use mini? OK - however

please boot any e2 image (aaf) or neutrino (bp),
then do via telnet:
fdisk -l

and don't forget the bootargs ;)

[darius]

any reason why you don't use mini? OK - however

please boot any e2 image (aaf) or neutrino (bp),
then do via telnet:
fdisk -l

and don't forget the bootargs ;)
I dont know what is mini . wher can i find informatin about mini?


AAF-ufs910:~# fdisk -l

Disk /dev/mtdblock0: 0 MB, 131072 bytes
255 heads, 63 sectors/track, 0 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

Disk /dev/mtdblock0 doesn't contain a valid partition table
Disk /dev/sda: 1028 MB, 1028653056 bytes
32 heads, 62 sectors/track, 1012 cylinders
Units = cylinders of 1984 * 512 = 1015808 bytes

Device Boot Start End Blocks Id System
/dev/sda1 1 253 250945 83 Linux
/dev/sda2 254 506 250976 83 Linux
/dev/sda3 507 759 250976 83 Linux

Disk /dev/sdb: 16.2 GB, 16219373568 bytes
255 heads, 63 sectors/track, 1971 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

Disk /dev/sdb: 16.2 GB, 16219373568 bytes
255 heads, 63 sectors/track, 1971 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sdb1 1 1972 15839200+ c Win95 FAT32 (LBA)

- - - Aktualisiert - - -

mpfs 23380 64 23316 0% /tmp
mpfs 23380 64 23316 0% /var/tmp
mpfs 23380 64 23316 0% /var/lock
mpfs 23380 64 23316 0% /var/run
dev/root 243096 56828 173720 25% /media
dev/root 243096 56828 173720 25% /root
dev/root 243096 56828 173720 25% /usr/lib
-sh: bootargs: not found
AAF-ufs910:~# bootargs bootargs
-sh: bootargs: not found
AAF-ufs910:~# 192.168.1.7
-sh: 192.168.1.7: not found
AAF-ufs910:~# bootargs -192.168.1.7
-sh: bootargs: not found
/dev/root 243096 56828
/dev/root 243096 56828
/dev/root 243096 56828
/dev/root 243096 56828
/dev/root 243096 56828
hon/Plugins
/dev/sda1 243064 153228
-sh: bootargs: not found
AAF-ufs910:~# 192.168.1.7
-sh: 192.168.1.7: not found
AAF-ufs910:~# bootargs -192.168.1.7
-sh: bootargs: not found
AAF-ufs910:~# df
Filesystem 1K-b



-sh: bootargs: not found
AAF-ufs910:~# 192.168.1.7
-sh: 192.168.1.7: not found
AAF-ufs910:~# bootargs -192.168.1.7
-sh: bootargs: not found
AAF-ufs910:~# df
Filesystem 1K-b

mpfs 23380 64 23316 0% /tmp
mpfs 23380 64 23316 0% /var/tmp
mpfs 23380 64 23316 0% /var/lock
mpfs 23380 64 23316 0% /var/run
dev/root 243096 56828 173720 25% /media
dev/root 243096 56828 173720 25% /root
dev/root 243096 56828 173720 25% /usr/lib
-sh: bootargs: not found
AAF-ufs910:~# bootargs bootargs
-sh: bootargs: not found
AAF-ufs910:~# 192.168.1.7
-sh: 192.168.1.7: not found
AAF-ufs910:~# bootargs -192.168.1.7
-sh: bootargs: not found
/dev/root 243096 56828
/dev/root 243096 56828
/dev/root 243096 56828
/dev/root 243096 56828
/dev/root 243096 56828
hon/Plugins
/dev/sda1 243064 153228
-sh: bootargs: not found
AAF-ufs910:~# 192.168.1.7
-sh: 192.168.1.7: not found
AAF-ufs910:~# bootargs -192.168.1.7
-sh: bootargs: not found
AAF-ufs910:~# df
Filesystem 1K-b



-sh: bootargs: not found
AAF-ufs910:~# 192.168.1.7
-sh: 192.168.1.7: not found
AAF-ufs910:~# bootargs -192.168.1.7
-sh: bootargs: not found
AAF-ufs910:~# df
Filesystem 1K-b

[suchmich1983]

@darius
Please use "Quotes" and "CODE" Boxes if you post code ....
If you dont know how have a look to the FAQ...

Thanks and regards

[darius]

@darius
Please use "Quotes" and "CODE" Boxes if you post code ....
If you dont know how have a look to the FAQ...

Thanks and regards
I know to CODE , but dont see the icone for it ! it is only for Quotes which avelable on top for me.
meny thanks

[suchmich1983]

it is only visible when click "Go Advanced" in the lower right corner of the answer-box....

[morly]

OK - you can boot images from usb either using BA or mini(maxi) uboot.
BA is the older possibility which enables a Startmenu onscreen - but heavily outdated.
mini uboot is the much better choice

Please just use google - there are so many threads about it.

[TheChip]

@Darius: please do not fullquote when your answer is placed under the quotet answer.

[team-leader]

Mit zwei Pingulux Plus habe ich ebenfalls Booting Probleme mit der Version.
Die Version davor läuft ohne Probleme.
Wenn ich den Receiver das erste mal Boote kommt kein Bild.
Wenn dann irgendwann nach einer ewigen Einrichtung und Neustarts das erste mal Bild kommt, läuft er.
Macht man ihn jedoch in den Standby und weckt ihn wieder auf, kommt ebenfalls wieder kein Bild.
Strom weg und wieder hin und ein Bild kommt.