PDA

Archiv verlassen und diese Seite im Standarddesign anzeigen : [GBQUAD] Sky V13 und HD+ 01 in der Quad mit HDMU-Image



Sambuca
20.01.2014, 17:27
Hallo.

Ich habe eine Gigablue Quad mit 4 HD-Tunern, darauf habe ich das aktuelle HDMU Image geflasht.
Ich möchte gern eine Sky V13 und eine HD+ 01 ansprechen.
Eine Karte soll in den internen Steckplatz und die zweite in eine Easymouse.

Bei der Grundkonfiguration habe ich Oscam 8837 installiert.
Damit hatte ich keinen Erfolg.
Ich habe es mit anderen Cams probiert, komme aber zu keinem Ergebnis.
Nicht eine Karte wird hell.

Gibt es eine Anleitung für diese Kombination?
Oder ist es besser, für die zweite Karte ein CI-Modul zu kaufen?
Wenn ja, welches funktioniert in der Quad mit einer der Karten?
Ich weiß nicht, welche Dateien ich bei der Quad mit HDMU editieren muss.
Was muss in welcher Datei stehen?

Bin für jede Hilfe dankbar.

Gruß Sambuca

hgdo
20.01.2014, 17:43
Um zu sehen, was da falsch läuft, solltest du ml deine Configs (oscam.conf, oscam.server und oscam.user) posten.

Joker7
20.01.2014, 17:51
..wie schon @hgdo schrieb, können Dir die Oscam-Spezies hier dann besser helfen..

... aber warum ne V13 UND ne HD+01 Karte .... HD+ kann man auch auf die V13 aufbuchen und die Config einer Karte ist dann sicherlich auch einfacher..

suchmich1983
20.01.2014, 17:52
Um zu sehen, was da falsch läuft, solltest du ml deine Configs (oscam.conf, oscam.server und oscam.user) posten.
richtig..

und hast du auch die entsprechenden Reader in der oscam.server aktiviert?
Ich würde auch erstmal mit einer Karte starten, wenn die läuft, kannst dich an die andere Karte machen.

hgdo
20.01.2014, 18:26
Dann versuchen wir es mal anders herum:
oscam.conf:
[global]
logfile = stdout
nice = -1
waitforcards = 1

[cache]
delay = 0

[dvbapi]
enabled = 1
user = local
boxtype = dreambox
au = 1
reopenonzap = 1

[webif]
httpport = 17001
httprefresh = 10
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255

oscam.server:
###########################################
############# SKY V13/HD01 ################
###########################################
[reader]
label = sky
protocol = internal
device = /dev/sci0
caid = 09C4 # Sky V13
boxid = 12345678
ins7e11 = 14
detect = cd
mhz = 500
group = 1
emmcache = 1,3,2


[reader]
label = hd01
protocol = mouse
device = /dev/ttyUSB0
caid = 1830
rsakey = BF...D5 # lässt sich ebenfalls leicht per google finden (Achtung es darf kein Leerzeichen drinne sein)
boxkey = A7-7C #16 stelliger boxkey, lässt sich ebenfalls leicht per google finden (Achtung es darf kein Leerzeichen drinne sein)
detect = cd
ecmwhitelist = 1830:92
mhz = 369
cardmhz = 368
ident = 1830:000000,003411,008011
group = 2
emmcache = 1,3,2
auprovid = 003411

oscam.user:
[account]
user = local
au = 1
pwd = 12121212 # Nur damit sich keiner ohne Passwort mit dem Server verbinden kann.
caid = 09C4,1830
group = 1,2

RAS- und Boxkey für HD01 musst du selbst herausfinden und eintragen.

Viel Erfolg!

Sambuca
20.01.2014, 19:50
Hallo.

Das ging schnell. Vielen Dank.
Ich habe zunächst mal HD+ bei Sky zugebucht. Ist wohl einfacher.
Muss ich mich also nur noch um die Sky V13 kümmern.

Ich habe die Config Dateien gefunden. Welche Cam soll ich nehmen?
Oscam8837 wurde oft gelobt.
Deshalb habe ich sie bei der Erstinstallation ausgewählt.

Unter usr\emu finde ich die Oscam8837.

unter usr\emu\start finde ich die oscam8837.emu:
Darin steht:
name = oscam8837
start = /usr/emu/oscam8837 -b -c /usr/keys &
stop = killall -9 oscam8837


Unter usr\keys finde ich die Config-Dateien.

Oscam.conf:


# oscam.conf #
# Read more: http://streamboard.gmc.to/oscam/browser/trunk/Distribution/doc/txt/oscam.conf.txt

[global]
logfile = /dev/null
disablelog = 1
unlockparental = 1
nice = -1
preferlocalcards = 1
saveinithistory = 1
lb_mode = 1
lb_retrylimit = 1600

[monitor]
port = 16500
nocrypt = 127.0.0.1,192.168.65.1,192.168.65.206,192.168.65.2 08
aulow = 30
hideclient_to = 15
monlevel = 1
appendchaninfo = 0

[cccam]
port = 12000
reshare = 0
version = 2.2.1

[dvbapi]
enabled = 1
au = 1
boxtype = dreambox
user = dvbapiau
pmt_mode = 0
request_mode = 0

[webif]
httpport = 83
httphelplang = de
httprefresh = 10
httpallowed = 127.0.0.1,192.168.0.1-192.168.255.255
httphideidleclients = 0
httpreadonly = 0
httpsavefullcfg = 0

Oscam.server:


############### General Instruction - oscam.server ###################
# To activate/deactivate the reader set enable = 1/0 #
# #
# You might specify further entries in each reader section #
# such as "caid =________" and/or "services = _________" but you needn´t #
# For further details see the OSCAM documentation #
################################################## ##########################


######################### Internal Readers ###############################
# Default Config should work with Seca, Conax, Cryptoworks, Viaccess, NDS #
# #
# For Irdeto, Betacrypt just activate "cardmhz=600" by removing the "#" #
# #
# For Nagra activate and set the correct "rsakey = " and "boxkey = " en #
# examples for HDplus HD02 and Sky S02 are included #
# #
# for specific Smartcards such as TIGER or Viaccess with AES-Key #
# see the OSCAM documentation #
################################################## ##########################
[reader]
enable = 0
description = Set as HD plus HD01
Label = Intern_Upper_HD01
Protocol = internal
device = /dev/sci0
emmcache = 1,1,2
detect = CD
group = 1
caid = 1830
cardmhz = 368
mhz = 368
rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A 23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156 F9EB64E8168EF09E4D9C5CCA4DD5
boxkey = A7642F57BC96D37C

[reader]
enable = 0
description = Set as HD plus HD02
Label = Intern_Upper_HD02
Protocol = internal
device = /dev/sci0
emmcache = 1,1,2
detect = CD
group = 1
caid = 1843
cardmhz = 368
mhz = 368
rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A 23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156 F9EB64E8168EF09E4D9C5CCA4DD5
boxkey = A7642F57BC96D37C

[reader]
enable = 0
description = Set as Sky S02
label = Intern_Upper_S02
protocol = internal
device = /dev/sci0
emmcache = 1,1,2
detect = CD
group = 1
caid = 1702
cardmhz = 600
mhz = 600

[reader]
enable = 0
description = Set as Sky V13
label = Intern_Upper_V13
protocol = internal
device = /dev/sci0
caid = 09C4
boxid = 12345678
ins7e11 = 15
detect = CD
# card not init. use other mhz 343,357,480,500 or 686....
mhz = 343
cardmhz = 357
group = 1
emmcache = 1,1,2
blockemm-unknown = 1
ndsversion = 2

[reader]
enable = 0
description = Set as Sky V14
label = Intern_Upper_V14
protocol = internal
device = /dev/sci0
caid = 098C
boxid = 12345678
ins7e11 = 15
detect = CD
# card not init. use other mhz 343,357,480,500 or 686....
mhz = 343
cardmhz = 357
group = 1
emmcache = 1,1,2
blockemm-unknown = 1
ndsversion = 2

#################### External Readers / SMARGO ########################
# Important !!!! Use SMARGO Firmware 1.4 or 1.5 #
# With regard to your Smartcard set up the Reader/Smargo as follows: #
# #
# For Seca, Conax, Cryptoworks, Viaccess, NDS, Nagra #
# Frequency Fixed 3,69 Mhz / Normal / T=0 / EGT = 0 #
# #
# For Irdeto, Betacrypt #
# Frequency Fixed 6,0Mhz / Normal / T=1 / EGT = 0 #
# #
# If SMARGO ist in Autoswitch mode, than activate fitting mhz/cardmhz- #
# Entries in the reader-Section #
# # #
# For Nagra activate and complete the "rsakey = " and "boxkey = " and #
# and remove the # in the smargopatch = 1 line #
# example for HDplus is included #
# #
# for specific Smartcards such as TIGER or Viaccess with AES-Key #
# see the OSCAM documentation #
################################################## ##########################

[reader]
enable = 0
description = Set as HD plus HD02
label = Extern_0_HD02
protocol = mouse
device = /dev/ttyUSB0
emmcache = 1,1,2
detect = CD
group = 1
smargopatch = 1
caid = 1843
rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A 23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156 F9EB64E8168EF09E4D9C5CCA4DD5
boxkey = A7642F57BC96D37C
#mhz = 357
#cardmhz = 357

[reader]
enable = 0
description = Set as Sky S02
label = Extern_0_S02
protocol = mouse
device = /dev/ttyUSB0
emmcache = 1,1,2
detect = CD
group = 1
caid = 1702
#mhz = 600
#cardmhz = 600

[reader]
enable = 0
description = Set as Sky V14
label = Extern_0_V14
protocol = mouse
device = /dev/ttyUSB0
caid = 098C
boxid = 12345678
ins7e11 = 15
detect = CD
group = 1
emmcache = 1,1,2
ndsversion = 2
#mhz = 357
#cardmhz = 357


######################### Remote Readers ##############################
# Important !!!! Use this or not in personal responsibility #
# #
# #
# For further details see the OSCAM documentation #
################################################## ##########################
[reader]
enable = 0
label = cccam-reader
protocol = cccam
device = IP/dyndns,PORT
user = USER
password = PASS
group = 1
emmcache = 1,1,2
cccmaxhop = 5
cccversion = 2.0.11

[reader]
enable = 0
label = camd35-reader
protocol = camd35
device = IP/dyndns,PORT
user = USER
password = PASS
group = 1
emmcache = 1,1,2

[reader]
enable = 0
label = newcamd-reader
protocol = newcamd
key = 0102030405060708091011121314
device = IP/dyndns,PORT
user = USER
password = PASS
group = 1
emmcache = 1,1,2

######## end of file ########

Oscam.user:


################## General Instruction - oscam.user ####################
# #
# per default no changes from the user are needed #
# #
################################################## ##########################
[account]
user = dvbapi
pwd = dvbapi
group = 1
au = 1
uniq = 0
betatunnel = 1833.FFFF:1702,1834.FFFF:1722

######## end of file ########

Das sind meine Dateien, wie sie im Moment vorliegen.
Was muss ich ändern?

Gruß Sambuca

TheChip
20.01.2014, 20:09
Nimm einfach die Configs von hgdo und schmeiß nur den HD01 teil raus. Der Rest sollte passen.

Sambuca
20.01.2014, 20:14
Muss außer der Inhalte von hdgo noch etwas in den Dateien stehen bleiben oder muss ich den gesamten Rest löschen?

Gruß Sambuca

suchmich1983
20.01.2014, 20:20
Kannst du so nehmen.. rest raus..

und vorher erst mal noch das hier lesen.. Danke! :)

Wie poste ich Logs und Code? (http://www.hdmedia-universe.com/board/showthread.php?1045-Hallo-ich-bin-neu-hier-was-muss-ich-wissen&p=12741&viewfull=1#post12741)