Archiv verlassen und diese Seite im Standarddesign anzeigen : [XpeedLX1/2] Online Update 22.03 Fehler
Hab gerade das Update gemacht, Box bootet nicht mehr. Solltet ihr vielleicht ausbessern, damit nicht jeder alles neu flashen muss ;)
hello, I confirm, the last picture freezes after installing online, the receiver is in a reboot cycle, while the update with usb ok
nuggistar
23.03.2014, 11:14
dito. selbes problem hier. bitte um behebung...
irgendjemand in den sinn gekommen, mal ein log zu machen?
@ bonkel hello, I have already tried it, but it makes me do it, just upgraded online is to restart, but it remains locked, with tools morly I tried to log in, but can not interact with the dec. I see now if I can somehow make the log.
currently mips boxes aren't supported - please wait for the next version (already in test phase)
BUT: for a serial log you can use the tool (don't try to connect, just switch to the logging tab, set rs232 settings and press start)
Online gehts nicht, aber Flashen per USB geht.
thanks @ morly, I hope to get around a null modem cable, otherwise I can not be of help
thanks @ morly, I hope to get around a null modem cable, otherwise I can not be of help
always a good idea if playing around with your box ;)
Hallo
gestern Abend Onlineupdate ausgeführt - trotz Warnung hier . Und siehe da - es lief alles durch + läüft auch heute noch ohne Probleme .
LX2
sirtobie
23.03.2014, 15:03
Habe gestern Abend auch ein online Update gemacht.
Warum habt Ihr die Einstellmöglichkeiten vom Standartskin kastriert.
Ich wollte die Farbe wieder auf silver stellen, aber das geht nicht mehr.
:36_2_18:
weil dein silver jetzt gold ist, er wurde beim updaten überschrieben, das Problem hatte ich schon mal gemeldet.
und weil es diese überschreibprobleme gibt's, ist die Einstellung rausgeflogen um fehler/error/rebootschleifen zu verhindern, die farben werden später aufm feed verfügbar sein....wenn zeit dafür da ist
Hello everyone, sorry for the delay, but only today I managed to try to make the log, but unfortunately even with the null modem cable RS232 line, I could not, just restart the dec begins to make the log, but then the program goes to error and terminates, do not let me log. is there any other possible solution? thanks in advance
zwackimann
28.03.2014, 09:25
No Log anymore needed - you have to do a new flash. Onlineupdate from images before 22.03 don`t work.
thank you, I just did now, and I'm satisfied of the image, good work of all the staff.
Powered by vBulletin® Version 4.2.5 Copyright ©2024 Adduco Digital e.K. und vBulletin Solutions, Inc. Alle Rechte vorbehalten.