PDA

Archiv verlassen und diese Seite im Standarddesign anzeigen : [AzBoxHD] HDMU_12345_AzboxHD_OE_1376_Flash



macmanolo
02.05.2014, 18:12
Habe gerade onlineupdate gemacht auf dem neuerste versión und der MediaCenter geth seit den nicht mehr?

Lege crashlog bei

mfg

macmanolo
03.05.2014, 15:33
Da keiner etwas darüber sagt, habe ich heute morgen von null auf neu geflasht, das ergebnis ist dasselbe wie gestern, nach aufruf von MediaCenter wierd das startbildschirm von MediaCenter geladen wen mann aber rechts oder links drück bekon mann einen WS, eine lössung dazu?

mfg.

arci
03.05.2014, 16:06
I confirm white screen error on HDMU Media Center (simple) after start time delay of it ... I just tried it now!

There is also another problem with the volume control, after the receiver wake up from standby!

Volume audio is too high ... and the decrease of the slider makes increment of the volume ... without a gradual step and you have to restart enigma to restore normal operation!

P.S. Other test [HDMU 12345 e AZBox Ultra HD]] with USB dongle DVB-T [AVerTV Volar Green HD A835 - AF9035] ---> OK :)

Ciao ...

bonkel
03.05.2014, 17:00
das problem is, das man das osd nich transparent schalten kann......was das media center aber nun macht.......
da muss ich für die box wieder ne exxtra wurst machen.....

sofrenic
03.05.2014, 20:13
media center problem, wifi does not connect to the network
Openspa image HD and SD picture looks mutch beter

bonkel
03.05.2014, 20:24
i think they use other kernel version....
why wifi does not work?????

macmanolo
03.05.2014, 21:35
OpenSpa 3.0 benutz kernel 3.9.2
OpenSpa 3.1 benutz kernel 3.3.1
Über die kualität der bilder kan ich mich nicht eusern kann nur sagen das es für mich beide gleich sind.
Was das vlan anbeträg, ist richtig das es nicht funkzioniert der wlan lässt sich ezwar einrichten aber bein verlassen des processes bekom mann einen WS.

Hier das crasslog:

<?xml version="1.0" encoding="utf-8"?>
<HDMU>
<enigma2>
<crashdate>sáb may 3 20:13:01 2014</crashdate>
<compiledate>Apr 22 2014</compiledate>
<skin>skin.xml</skin>
<sourcedate>2014-04-22</sourcedate>
<rev>
<=!=[=C=D=A=T=A=[
-----====== HDMU 12316 enigma2 Git 1344 ======-----
]=]=>
</rev>
<freespace>
<=!=[=C=D=A=T=A=[
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/hda1 181588 173976 0 100% /
tmpfs 64 0 64 0% /media
/dev/hda2 4376 24 4128 1% /media/usb
/dev/hda5 7412372 273916 6761920 4% /media/hda5
/dev/hdb1 480719088 270376920 185922968 59% /media/hdd
tmpfs 51028 248 50780 0% /var/volatile
/dev/hda5 7412372 273916 6761920 4% /media/DOMExtender
]=]=>
</freespace>
<freeram>
<=!=[=C=D=A=T=A=[
]=]=>
</freeram>
<version>3.0.0</version>
</enigma2>
<image>
<stbmodel>azboxhd</stbmodel>
<kernelversion>
<=!=[=C=D=A=T=A=[
Linux azboxhd 3.3.1-opensat #1 PREEMPT Sun Apr 20 18:01:03 CEST 2014 mips GNU/Linux
]=]=>
</kernelversion>
<kernelcmdline>mem=107m console=ttyS0,115200</kernelcmdline>
<nimsockets>NIM Socket 0:</nimsockets>
<imageversion>
<!-- No such file or directory -->
</imageversion>
<imageissue>
<=!=[=C=D=A=T=A=[
hdmu 4 %h

]=]=>
</imageissue>
</image>
<crashlogs>
<enigma2crashlog>
<=!=[=C=D=A=T=A=[
+ (1) Background File Eraser
+ (5) Tuxtxt
+ (8) graphics acceleration manager
+ (9) GFBDC
8174k video mem
setting /dev/tty0 status failed.
- double buffering available!
974kB available for acceleration surfaces.
resolution: 1280 x 720 x 32 (stride: 5120)
+ (9) gLCDDC
found OLED display!
lcd buffer 0x785bc0 8448 bytes, stride 132
LCD resolution: 132 x 64 x 8 (stride: 132)
+ (9) Font Render Class
+ (10) gRC
RC thread created successfully
+ (15) eWindowStyleManager
+ (20) DVB-CI UI
+ (20) UHF Modulator
+ (20) RC Input layer
+ (20) misc options
+ (20) AVSwitch Driver
couldnt open /dev/dbox/fp0 to monitor vcr scart slow blanking changed!
+ (21) input device driver
Input device "dreambox advanced remote control (native)" is a remotecontrol
Found 1 input devices.
+ (22) Hdmi CEC driver
+ (30) eActionMap
+ (35) CI Slots
scanning for common interfaces..
cannot open /proc/stb/tsmux/input2
eDVBCIInterfaces->setInputSource(0, 0)
eDVBCIInterfaces->setInputSource(1, 1)
done, found 1 common interface slots
+ (35) CA handler
+ (36) Stream server
+ (40) eServiceCenter
settings instance.
+ (41) eServiceFactoryDVD
+ (41) eServiceFactoryHDMI
+ (41) eServiceFactoryM2TS
+ (41) eServiceFactoryMP3
+ (41) eServiceFactoryFS
+ (41) eServiceFactoryDVB
reached rl 70
---- opening lame channel db
reading services (version 4)
loaded 143 channels/transponders and 2976 services
scanning for frontends..
opening frontend 0
main thread is non-idle! display spinner!
no spinner DC!
main thread is non-idle! display spinner!
no spinner DC!
close frontend 0
opening frontend 1
close frontend 1
boxtype detection via /proc/stb/info not possible... use fallback via demux count!

found 1 adapter, 2 frontends(2 sim) and 3 demux, boxtype 1
Use valid Linux Time :) (RTC?)
[EPGC] Initialized EPGCache (wait for setCacheFile call now)
[ePNG] couldn't open /usr/share/enigma2/skin_default/spinner/wait13.png
found 12 spinner!

setIoPrio best-effort level 3 ok
main thread is non-idle! display spinner!
Failed to open /dev/dbox/fp0
Scanning hardware info
Detected: vuultimo (120)
[Harddisk] enumerating block devices...
new Harddisk hda -> /dev/hda -> /dev/hda
[ePopen] command: ('sdparm', 'sdparm', '--set=SCT=0', '/dev/hda')
new Harddisk hdb -> /dev/hdb -> /dev/hdb
[ePopen] command: ('sdparm', 'sdparm', '--set=SCT=0', '/dev/hdb')
Reading satellites.xml
Reading cables.xml
couldn't open /etc/tuxbox/cables.xml!!
Reading terrestrial.xml
sec config cleared
setSlotInfo for dvb frontend 0 to slotid 0, descr Conexant CX24116/CX24118, need rotorworkaround No, enabled Yes, DVB-S2 Yes
setSlotInfo for dvb frontend 1 to slotid 1, descr Zarlink ZL10353 DVB-T, need rotorworkaround No, enabled Yes, DVB-S2 No
slot: 0 configmode: advanced
add 192 to 1
sec config completed
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropriate ioctl for device >
[iInputDevices] setRepeat for device event0 to 80 ms
[iInputDevices] setDelay for device event0 to 900 ms
Activating keymap: Default (US)
[ePopen] command: loadkmap < /usr/share/keymaps/default.kmap
Activating language Español
[ePopen] command: ip -o addr show dev eth0
[ePopen] command: ip -o addr show dev wlan0
[LCD] can't open /dev/dbox/fp0
[LCD] can't open /dev/dbox/fp0
[TVweb] Plugins
Plugin Extensions/CutListEditor failed to load: No module named CutListEditor.plugin
HDMU Center: Import evfd failed
Plugin Extensions/GraphMultiEPG failed to load: No module named GraphMultiEPG.plugin
Plugin Extensions/WebInterface failed to load: No module named plugin
Plugin Extensions/OpenWebif failed to load: No module named OpenWebif.plugin
Plugin Extensions/BMediaCenter failed to load: No module named BMediaCenter.plugin
Plugin Extensions/MediaScanner failed to load: No module named MediaScanner.plugin
Plugin SystemPlugins/SkinSelector failed to load: No module named SkinSelector.plugin
getModeList for port DVI-PC
remove DVI-PC because of not existing modes
getModeList for port YPbPr
getModeList for port Scart
getModeList for port DVI
hotplug on dvi
setMode - port: DVI mode: 1080i rate: 50Hz
Plugin SystemPlugins/VideoTune failed to load: No module named VideoTune.plugin
Plugin SystemPlugins/Satfinder failed to load: No module named Satfinder.plugin
Plugin SystemPlugins/NetworkWizard failed to load: No module named NetworkWizard.plugin
Plugin SystemPlugins/NetworkBrowser failed to load: No module named NetworkBrowser.plugin
Plugin SystemPlugins/WirelessLan failed to load: No module named WirelessLan.plugin
Plugin SystemPlugins/SoftwareManager failed to load: No module named SoftwareManager.plugin
Plugin SystemPlugins/FastScan failed to load: No module named FastScan.plugin
starting hotplug handler
wasTimerWakeup failed!
[LCD] can't open /dev/dbox/fp0
[NAVIGATION] USE DEEPSTAND-WORKAROUND FOR THIS BOXTYPE (azboxhd) !!
[CrossEPG_Auto] AutoStart Enabled
[CrossEPG_Auto] Schedule Disabled at vie 08 mar 2013 11:18:27 CET
[EPGC] setCacheFile read/write epg data from/to '/media/DOMExtender/epg.dat'
[EPGC] time updated.. start EPG Mainloop
[SKIN] Parsing embedded skin <embedded-in-'Screensaver'>
[EPGC] 393 events read from /media/DOMExtender/epg.dat
accel alloc failed

ERROR: accelAlloc failed
warning, skin is missing element RassLogo in <class 'Screens.RdsDisplay.RdsInfoDisplay'>
warning, skin is missing element UnhandledKeyPixmap in <class 'Screens.UnhandledKey.UnhandledKey'>
warning, skin is missing element From in <class 'Screens.Dish.Dish'>
warning, skin is missing element Goto in <class 'Screens.Dish.Dish'>
warning, skin is missing element tunerName in <class 'Screens.Dish.Dish'>
warning, skin is missing element turnSpeed in <class 'Screens.Dish.Dish'>
warning, skin is missing element posGoto in <class 'Screens.Dish.Dish'>
warning, skin is missing element posFrom in <class 'Screens.Dish.Dish'>
warning, skin is missing element turnTime in <class 'Screens.Dish.Dish'>
RemovePopup, id = ZapError
setValue 5
Setvolume: 100 100 (raw)
Setvolume: 0 0 (-1db)
Setvolume: 5 5 (raw)
Setvolume: 60 60 (-1db)
playing 1:0:1:76CA:40E:1:C00000:0:0:0:
not pauseable.
not pauseable.
not pauseable.
download failed, no cuesheet interface
RemovePopup, id = ZapError
allocate channel.. 040e:0001
opening frontend 0
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 0 Freq 11038000 Pol 1 SR 22000000 INV 2 FEC 4 orbpos 192 system 0 modulation 1 pilot 2, rolloff 0
tuning to 1288 mhz
OURSTATE: tuning
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:1:76CA:40E:1:C00000:0:0:0:
allocate demux
[ePopen] command: route -n | grep eth0
poll: unhandled POLLERR/HUP/NVAL for fd 31(17)
poll: unhandled POLLERR/HUP/NVAL for fd 33(17)
[ePopen] command: route -n | grep wlan0
poll: unhandled POLLERR/HUP/NVAL for fd 36(17)
poll: unhandled POLLERR/HUP/NVAL for fd 39(16)
poll: unhandled POLLERR/HUP/NVAL for fd 42(16)
[SEC] invalidate current switch params
[SEC] setVoltage 1
[SEC] sleep 10ms
set sequence pos 3
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
[SEC] sleep 500ms
0.0.0.0
192.168
nameservers: [[192, 168, 1, 1]]
read configured interface: {'lo': {'dhcp': False}, 'wlan0': {'dhcp': True}, 'eth0': {'dhcp': False}}
self.ifaces after loading: {'wlan0': {'preup': False, 'predown': False, 'ip': [0, 0, 0, 0], 'up': False, 'mac': '00:09:0f:0a:c4:d8', 'dhcp': True, 'netmask': [0, 0, 0, 0], 'gateway': [0, 0, 0, 0]}, 'eth0': {'preup': False, 'predown': False, 'ip': [192, 168, 0, 130], 'up': True, 'mac': '00:02:14:14:10:17', 'dhcp': False, 'netmask': [255, 255, 255, 0], 'gateway': [192, 168, 0, 1]}}
poll: unhandled POLLERR/HUP/NVAL for fd 32(16)
poll: unhandled POLLERR/HUP/NVAL for fd 38(16)
(0)fe event: status 1f, inversion off, m_tuning 2
OURSTATE: ok
[eDVBLocalTimerHandler] channel 0x16b2d68 running
[eEPGCache] channel 0x16b2d68 running
stop release channel timer
eventNewProgramInfo 0 0
have 1 video stream(s) (00a8), and 1 audio stream(s) (0070), and the pcr pid is 00a8, and the text pid is 0038
allocate demux
decoder state: play, vpid=168, apid=112
DMX_SET_PES_FILTER(0xa8) - pcr - ok
DEMUX_START - pcr - ok
AUDIO_SET_BYPASS(1) - ok
AUDIO_PAUSE - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 0 - ok
DMX_SET_PES_FILTER(0xa8) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
DMX_SET_PES_FILTER(0x38) - ttx - ok
DEMUX_START - ttx - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
AUDIO_CHANNEL_SELECT(0) - ok
disable teletext subtitles page ffffffffffffffff (und)
not pauseable.
not pauseable.
[eDVBCAService] new service 1:0:1:76CA:40E:1:C00000:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:1:76CA:40E:1:C00000:0:0:0:
RemovePopup, id = ZapError
[eDVBLocalTimerHandler] diff is 0
[eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
[eDVBLocalTimerHandler] not changed
use pmtpid 0409 for service_id 76ca
eventNewProgramInfo 0 0
have 1 video stream(s) (00a8), and 2 audio stream(s) (0070, 0071), and the pcr pid is 00a8, and the text pid is 0038
decoder state: play, vpid=168, apid=112
poll: unhandled POLLERR/HUP/NVAL for fd 48(16)
[Dish] tuning failed
[TVweb] Plugins
Plugin Extensions/WebInterface failed to load: No module named plugin
[EPGC] start caching events(1399140531)
crc32 failed! is cb5e1b4c

[EPGC] nownext finished(1399140538)
Media Center: Import evfd failed
[NetworkBrowser] fallback to default translation for NetworkBrowser
[NetworkBrowser] fallback to default translation for Search for network shares
[NetworkBrowser] fallback to default translation for MountManager
[NetworkBrowser] fallback to default translation for Manage network shares
[NetworkBrowser] fallback to default translation for Mount again
[NetworkBrowser] fallback to default translation for Attempt to mount shares again
AT plugin not found
ER plugin not found
[OpenWebif] no plugins to load
[OpenWebif] started on 80
[OpenWebif] started on 443
accel alloc failed

ERROR: accelAlloc failed
[NetworkBrowser] fallback to default translation for MountManager
[NetworkBrowser] fallback to default translation for Manage your network shares...
[NetworkBrowser] fallback to default translation for MountManager
[NetworkBrowser] fallback to default translation for Manage your network shares...
[ePopen] command: iwconfig wlan0
[Wlan.py] self.wlaniface after loading: {'wlan0': {'quality': False, 'accesspoint': 'Not-Associated Tx-Power=0 dBm', 'encryption': 'off', 'signal': False, 'frequency': False, 'essid': 'off', 'bitrate': False}}
poll: unhandled POLLERR/HUP/NVAL for fd 55(16)
[iStatus] killing self.WlanConsole
[Wlan.py] parsing configfile: /etc/wpa_supplicant.conf
setting for adapter eth0 attribute up to value False
Traceback (most recent call last):
File "/usr/lib/enigma2/python/mytest.py", line 194, in processDelay
callback(*retval)
File "/usr/lib/enigma2/python/Screens/NetworkSetup.py", line 550, in secondIfaceFoundCB
File "/usr/lib/enigma2/python/Components/Network.py", line 533, in deactivateInterface
File "/usr/lib/enigma2/python/Components/Network.py", line 682, in msgPlugins
File "/home/bonkel23/neu/build/tmp/work/azboxhd-oe-linux/enigma2-plugin-extensions-openwebif/0.1+gitAUTOINC+f9eab298d6-r0.72/git/plugin/plugin.py", line 125, in IfUpIfDown

NameError: global name 'global_session' is not defined
(PyObject_CallObject(<bound method Session.processDelay of <__main__.Session instance at 0x14f2b70>>,()) failed)
getResolvedKey config.plugins.crashlogautosubmit.sendAnonCrashlog failed !! (Typo??)
getResolvedKey config.plugins.crashlogautosubmit.addNetwork failed !! (Typo??)
getResolvedKey config.plugins.crashlogautosubmit.addWlan failed !! (Typo??)
]=]=>
</enigma2crashlog>
</crashlogs>
</HDMU>
mfg.

bonkel
03.05.2014, 21:46
plugcontrol,...openwebif auf normal stellen

macmanolo
03.05.2014, 22:10
plugcontrol,...openwebif auf normal stellen

OK, damit kein WS mehr, trozdem wierd der receiver nicht ans lan per vlan eingebunden, mit kabel kein problem.

mfg.

sofrenic
04.05.2014, 00:25
openspa drivers and kernal is

AZBox HD kernel 3.3.1
AZBox HD Drivers 03/02/14
Vuplus Drivers 18/03/14

WPA is protection wifi no way to connect to the router. HDMU 07/01/2014, Openspa conect without problem,, other'm not trying out

bonkel
04.05.2014, 03:06
HDMU 07/01/2014 ??? what did you mean with that, please tell us the hdmu and oe rev in filename

sofrenic
05.05.2014, 19:54
HDMU_11949_AzboxHD_OE_851_Flash.zip (http://images.hdmedia-universe.com/mips/azboxhd/HDMU_11949_AzboxHD_OE_851_Flash.zip)
07-Jan-2014 19:29
54.63 MB



Good luck in your future work

bonkel
05.05.2014, 20:07
please use a newer rev.....

as i know, the problem with wifi, is a driver problem, and can only fixed by thrripper(or what was the name)?

sofrenic
07.05.2014, 01:11
Man called ripper. I do not think he has that he needs to change anything because it has wifi connects with image HDMU_11949_AzboxHD_OE_851_Flash.zip with all after him not. everything I added and tested
If someone manages to connect to the router via WiFi after that image would be nice to hear

bonkel
07.05.2014, 01:21
This Image is a old Image. Wird a diffrent Kernel

arci
10.05.2014, 23:03
Hello ...

HDMU 12384 ... Test

Point of the situation ... that prospects there are for the future of these features !?!

-HDMU Media Center
- WiFi access
- Fan Control - (RTiSYS git13+e368824-r16) ... It's not compatible !

an other user complains also of IPTV!

@sasha ... has a bit of time to work on it !?!

Ciao ...

arci
14.05.2014, 23:35
Hi bonkel ...

Test HDMU 12405 ... failure on first E2 booting splash !

On UART log ... error loop ... 7312


tango2_bmide: fail to setup dma, fallback to pio
MBUS: error previous command is pending (0:4) ...


Ciao ...

macmanolo
17.05.2014, 12:16
HDMU 12407 das MediaCenter geht nun wieder, aber das cover herunterladen macht immer noch einen WS.

Lege log bei.

bonkel
17.05.2014, 14:00
als workaround, coverdownload für aktuellen ordner nutzen

macmanolo
17.05.2014, 15:56
als workaround, coverdownload für aktuellen ordner nutzen

OK, damit gehts ;-) jetz fält nur noch der wifi der will einfach nicht (das für anderer), ich benutze es ja über kabelverbindung.

mfg.

bonkel
17.05.2014, 16:11
einzel is auch gefixed....im nächsten dann

macmanolo
17.05.2014, 16:17
einzel is auch gefixed....im nächsten dannjeje, vielen Dank in voraus für all eure arbeit.

mfg

arci
17.05.2014, 18:32
Test HDMU 12407: Now starting ...

- Improved zap time = OK
- HBMC = now start ... but there is a problem also with Web Radio "Test Play with default radio service pls" (WS)
- Automount usb device = NOK
- WiFi = NOK
- Keymap = NOK "change "TvRadioActions" definitions ... not possible to return at TV-List from Radio-List call !"

Ciao ...

bonkel
17.05.2014, 19:47
In Media Center. Web Radio. Settings disable fade effekt

arci
17.05.2014, 20:15
In Media Center. Web Radio. Settings disable fade effekt

Not solve ... WS with another crash log:

It seems that ... disabling the fade effect = No ... set is not stored!

The error is repeated ... and at next enigma 2 gui start ... fade effect is always set "Yes"


Traceback (most recent call last):
File "/home/bonkel23/armbuildtmp/Extensions/BMediaCenter/MC_AudioPlayer.py", line 852, in doaFadeIn
IOError: [Errno 2] No such file or directory: '/proc/stb/video/alpha'
(PyObject_CallObject(<bound method MC_WebRadio.doaFadeIn of <class 'Plugins.Extensions.BMediaCenter.MC_AudioPlayer.MC _WebRadio'>>,()) failed)
getResolvedKey config.plugins.crashlogautosubmit.sendAnonCrashlog failed !! (Typo??)
getResolvedKey config.plugins.crashlogautosubmit.addNetwork failed !! (Typo??)
getResolvedKey config.plugins.crashlogautosubmit.addWlan failed !! (Typo??)


Ciao ...