joex
01.08.2014, 07:09
HDMU_12762_E3HD_OE_1639_Flash
+ (20) misc options
+ (20) AVSwitch Driver
couldnt open /dev/dbox/fp0 to monitor vcr scart slow blanking changed!
+ (21) input device driver
Input device "dreambox remote control (native)" is a remotecontrol
Input device "dreambox advanced remote control (native)" is a remotecontrol
Found 2 input devices.
+ (22) Hdmi CEC driver
+ (30) eActionMap
+ (35) CI Slots
scanning for common interfaces..
eDVBCIInterfaces->setInputSource(0, 0)
eDVBCIInterfaces->setInputSource(1, 1)
done, found 0 common interface slots
+ (35) CA handler
+ (40) eServiceCenter
settings instance.
+ (41) eServiceFactoryDVD
+ (41) eServiceFactoryHDMI
+ (41) eServiceFactoryM2TS
+ (41) eServiceFactoryMP3
+ (41) eServiceFactoryFS
+ (41) eServiceFactoryDVB
+ (41) Encoders
+ (41) Stream server
reached rl 70
---- opening lame channel db
reading services (version 4)
loaded 242 channels/transponders and 6848 services
scanning for frontends..
opening frontend 0
close frontend 0
found 1 adapter, 1 frontends(1 sim) and 7 demux, boxtype 3
RTC not ready... wait for transponder time
[EPGC] Initialized EPGCache (wait for setCacheFile call now)
[ePNG] couldn't open /usr/share/enigma2/skin_default/spinner/wait13.png
found 12 spinner!
executing main
setIoPrio best-effort level 3 ok
main thread is non-idle! display spinner!
couldn't open /proc/stb/misc/12V_output
Scanning hardware info
Detected: e3hd (0.91-1405161402)
[Harddisk] enumerating block devices...
new Harddisk sda -> /dev/sda -> /dev/sda
SKIN ERROR: {skin_display.xml}: display skin not found. Please contact the skin'
s author!
defaulting to standard display skin... skin_display.xml
Reading satellites.xml
sec config cleared
setSlotInfo for dvb frontend 0 to slotid 0, descr BCM7346 (internal), need rotor
workaround No, enabled Yes, DVB-S2 Yes
slot: 0 configmode: simple
diseqcmode: diseqc_a_b
sec config completed
Renumbering...
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropr
iate ioctl for device >
Activating keymap: Default (US)
[ePopen] command: loadkmap < /usr/share/keymaps/default.kmap
Activating language English
--> setting scaler_sharpness to: 0000000D
[ePopen] command: ip -o addr show dev eth0
FIXME: request for unknown slot
FIXME: request for unknown slot
FIXME: request for unknown slot
FIXME: request for unknown slot
HDMU Center: Import evfd failed
^[[BMedia Center: Import evfd failed
[NetworkBrowser] fallback to default translation for NetworkBrowser
[NetworkBrowser] fallback to default translation for Search for network shares
[NetworkBrowser] fallback to default translation for MountManager
[NetworkBrowser] fallback to default translation for Manage network shares
[NetworkBrowser] fallback to default translation for Mount again
[NetworkBrowser] fallback to default translation for Attempt to mount shares aga
in
getModeList for port DVI-PC
remove DVI-PC because of not existing modes
getModeList for port YPbPr
getModeList for port Scart
getModeList for port DVI
hotplug on dvi
setMode - port: YPbPr mode: 720p rate: 50Hz
starting hotplug handler
[EPGC] setCacheFile read/write epg data from/to '/hdd/epg.dat'
Reading ['/usr/lib/enigma2/python/Plugins/SystemPlugins/Videomode/videowizard.x
ml']
getStepWithID: start
result: nothing
('en_EN', ('English', 'en', 'EN'))
++++++++++++***++**** VideoWizard-createSummary
[SKIN] No skin to read...
Updating values in step 1
set LCD text
wizard step: {'code': u'self["portpic"].show()\nself.clearSelectedKeys()\nself.s
electKey("OK")', 'text': 'Video input selection\n\nPlease press OK if you can se
e this page on your TV (or select a different input port).\n\nThe next input por
t will be automatically probed in 20 seconds.', 'displaytext': 'Select video inp
ut with up/down buttons', 'id': 'inputselection', 'condition': '', 'listevaluati
on': u'inputSelectionMade', 'timeoutaction': 'selectnext', 'nextstep': 'modesele
ction', 'code_async': '', 'codeafter_async': '', 'timeoutstep': '', 'list': [],
'onselect': u'inputSelectionMoved', 'dynamiclist': u'listInputChannels', 'timeou
t': 20, 'codeafter': '', 'config': {'screen': None, 'args': None, 'type': ''}}
wizard text Video input selection
Please press OK if you can see this page on your TV (or select a different input
port).
The next input port will be automatically probed in 20 seconds.
set LCD text
code self["portpic"].show()
self.clearSelectedKeys()
self.selectKey("OK")
selectPic: arrowdown
showing list, 1
self.list: <Components.Sources.List.List object at 0x12ee8d0>
self.list: <Components.Sources.List.List object at 0x12ee8d0>
self.list: <Components.Sources.List.List object at 0x12ee8d0>
self.list: <Components.Sources.List.List object at 0x12ee8d0>
self.list: <Components.Sources.List.List object at 0x12ee8d0>
self.list: <Components.Sources.List.List object at 0x12ee8d0>
setZPosition
dynamic list, calling listInputChannels
listInputChannels: [('HDMI', 'DVI'), ('Scart', 'Scart'), ('YPbPr', 'YPbPr')]
self.selection: DVI
input selection moved: DVI
inputSelect: DVI
getModeList for port DVI
modeList: [('720p', ['50Hz', 'multi', '60Hz']), ('1080p', ['50Hz', 'multi', '60H
z']), ('1080i', ['50Hz', 'multi', '60Hz']), ('576p', ['50Hz']), ('480p', ['60Hz'
]), ('576i', ['50Hz']), ('480i', ['60Hz'])]
modes for port DVI and mode 720p
getModeList for port DVI
('720p', ['50Hz', 'multi', '60Hz'])
('1080p', ['50Hz', 'multi', '60Hz'])
('1080i', ['50Hz', 'multi', '60Hz'])
('576p', ['50Hz'])
('480p', ['60Hz'])
('576i', ['50Hz'])
('480i', ['60Hz'])
setMode - port: DVI mode: 720p rate: 50Hz
self.selection: DVI
input selection moved: DVI
inputSelect: DVI
getModeList for port DVI
modeList: [('720p', ['50Hz', 'multi', '60Hz']), ('1080p', ['50Hz', 'multi', '60H
z']), ('1080i', ['50Hz', 'multi', '60Hz']), ('576p', ['50Hz']), ('480p', ['60Hz'
]), ('576i', ['50Hz']), ('480i', ['60Hz'])]
modes for port DVI and mode 720p
getModeList for port DVI
('720p', ['50Hz', 'multi', '60Hz'])
('1080p', ['50Hz', 'multi', '60Hz'])
('1080i', ['50Hz', 'multi', '60Hz'])
('576p', ['50Hz'])
('480p', ['60Hz'])
('576i', ['50Hz'])
('480i', ['60Hz'])
setMode - port: DVI mode: 720p rate: 50Hz
self.selection: DVI
input selection moved: DVI
inputSelect: DVI
getModeList for port DVI
modeList: [('720p', ['50Hz', 'multi', '60Hz']), ('1080p', ['50Hz', 'multi', '60H
z']), ('1080i', ['50Hz', 'multi', '60Hz']), ('576p', ['50Hz']), ('480p', ['60Hz'
]), ('576i', ['50Hz']), ('480i', ['60Hz'])]
modes for port DVI and mode 720p
getModeList for port DVI
('720p', ['50Hz', 'multi', '60Hz'])
('1080p', ['50Hz', 'multi', '60Hz'])
('1080i', ['50Hz', 'multi', '60Hz'])
('576p', ['50Hz'])
('480p', ['60Hz'])
('576i', ['50Hz'])
('480i', ['60Hz'])
setMode - port: DVI mode: 720p rate: 50Hz
showing config
setValue 50
Setvolume: 100 100 (raw)
Setvolume: 0 0 (-1db)
Setvolume: 50 50 (raw)
Setvolume: 32 32 (-1db)
timeoutCounter: 19
eHdmiCEC: received message 89 01
[ePopen] command: route -n | grep eth0
poll: unhandled POLLERR/HUP/NVAL for fd 29(16)
poll: unhandled POLLERR/HUP/NVAL for fd 33(16)
timeoutCounter: 18
0.0.0.0
192.168
nameservers: [[192, 168, 178, 1]]
read configured interface: {'bnep0': {'dhcp': True}, 'usb0': {'dhcp': False}, 'l
o': {'dhcp': False}, 'wlan0': {'dhcp': True}, 'atml0': {'dhcp': True}, 'eth1': {
'dhcp': True}, 'eth0': {'dhcp': True}}
self.ifaces after loading: {'eth0': {'preup': False, 'predown': False, 'ip': [19
2, 168, 178, 49], 'up': True, 'mac': '00:15:c0:15:6e:cd', 'dhcp': True, 'bcast':
[192, 168, 178, 255], 'netmask': [255, 255, 255, 0], 'gateway': [192, 168, 178,
1]}}
AT plugin not found
ER plugin not found
Traceback (most recent call last):
File "/usr/lib/enigma2/python/Tools/BoundFunction.py", line 9, in __call__
File "/usr/lib/enigma2/python/Components/Console.py", line 56, in finishedCB
File "/usr/lib/enigma2/python/Components/Network.py", line 131, in routeFinish
ed
File "/usr/lib/enigma2/python/Components/Network.py", line 226, in loadNetwork
Config
File "/usr/lib/enigma2/python/Components/Network.py", line 682, in msgPlugins
File "/home/bonkel23/neu/build/tmp/work/e3hd-oe-linux/enigma2-plugin-extension
s-openwebif/0.1+gitAUTOINC+f85d02a6c3-r0.72/git/plugin/plugin.py", line 146, in
IfUpIfDown
File "/home/bonkel23/neu/build/tmp/work/e3hd-oe-linux/enigma2-plugin-extension
s-openwebif/0.1+gitAUTOINC+f85d02a6c3-r0.72/git/plugin/httpserver.py", line 125,
in HttpdStart
File "/home/bonkel23/neu/build/tmp/work/e3hd-oe-linux/enigma2-plugin-extension
s-openwebif/0.1+gitAUTOINC+f85d02a6c3-r0.72/git/plugin/httpserver.py", line 49,
in buildRootTree
File "/home/bonkel23/neu/build/tmp/work/e3hd-oe-linux/enigma2-plugin-extension
s-openwebif/0.1+gitAUTOINC+f85d02a6c3-r0.72/git/plugin/controllers/root.py", lin
e 48, in __init__
File "/home/bonkel23/neu/build/tmp/work/e3hd-oe-linux/enigma2-plugin-extension
s-openwebif/0.1+gitAUTOINC+f85d02a6c3-r0.72/git/plugin/controllers/BQE.py", line
270, in __init__
NameError: global name 'File' is not defined
(PyObject_CallObject(<Tools.BoundFunction.boundFunction instance at 0x1351030>,(
0,)) failed)
getResolvedKey config.plugins.crashlogautosubmit.sendAnonCrashlog failed !! (Typ
o??)
getResolvedKey config.plugins.crashlogautosubmit.addNetwork failed !! (Typo??)
getResolvedKey config.plugins.crashlogautosubmit.addWlan failed !! (Typo??)
main thread is non-idle! display spinner!
poll: unhandled POLLERR/HUP/NVAL for fd 29(16)
Unhandled error in Deferred:
Unhandled Error
Traceback (most recent call last):
File "/usr/lib/python2.7/threading.py", line 524, in __bootstrap
File "/usr/lib/python2.7/threading.py", line 551, in __bootstrap_inner
File "/usr/lib/python2.7/threading.py", line 504, in run
--- <exception caught here> ---
File "/usr/lib/python2.7/site-packages/twisted/python/threadpool.py", line 207
, in _worker
File "/usr/lib/python2.7/site-packages/twisted/python/context.py", line 118, i
n callWithContext
File "/usr/lib/python2.7/site-packages/twisted/python/context.py", line 81, in
callWithContext
File "/usr/lib/enigma2/python/Components/Lcd.py", line 54, in JobTask
File "/usr/lib/python2.7/site-packages/usb/legacy.py", line 333, in busses
return (Bus(),)
File "/usr/lib/python2.7/site-packages/usb/legacy.py", line 329, in __init__
self.devices = [Device(d) for d in core.find(find_all=True)]
File "/usr/lib/python2.7/site-packages/usb/core.py", line 846, in find
raise ValueError('No backend available')
exceptions.ValueError: No backend available
connectionLost? [Failure instance: Traceback (failure with no frames): <class 't
wisted.internet.error.ConnectionLost'>: Connection to the other side was lost in
a non-clean fashion: Connection lost.
]
(exit code 5)
---- saving lame channel db
saved 242 channels and 6848 services!
release cached channel (timer timeout)
- (41) eServiceFactoryDVD
- (41) eServiceFactoryHDMI
- (41) eServiceFactoryM2TS
- (41) eServiceFactoryMP3
- (41) eServiceFactoryFS
- (41) eServiceFactoryDVB
- (41) Encoders
- (41) Stream server
- (40) eServiceCenter
clear instance
- (35) CI Slots
- (35) CA handler
- (30) eActionMap
- (22) Hdmi CEC driver
- (21) input device driver
- (20) DVB-CI UI
- (20) UHF Modulator
- (20) RC Input layer
- (20) misc options
- (20) AVSwitch Driver
- (15) eWindowStyleManager
- (10) gRC
waiting for gRC thread shutdown
gRC thread has finished
- (9) GFBDC
- (9) gLCDDC
- (9) Font Render Class
- (8) graphics acceleration manager
- (5) Tuxtxt
- (1) Background File Eraser
reached rl -1
root@e3hd:~#
Diese Version "HDMU_12756_E3HD_OE_1639_Flash" funktioniert noch.
+ (20) misc options
+ (20) AVSwitch Driver
couldnt open /dev/dbox/fp0 to monitor vcr scart slow blanking changed!
+ (21) input device driver
Input device "dreambox remote control (native)" is a remotecontrol
Input device "dreambox advanced remote control (native)" is a remotecontrol
Found 2 input devices.
+ (22) Hdmi CEC driver
+ (30) eActionMap
+ (35) CI Slots
scanning for common interfaces..
eDVBCIInterfaces->setInputSource(0, 0)
eDVBCIInterfaces->setInputSource(1, 1)
done, found 0 common interface slots
+ (35) CA handler
+ (40) eServiceCenter
settings instance.
+ (41) eServiceFactoryDVD
+ (41) eServiceFactoryHDMI
+ (41) eServiceFactoryM2TS
+ (41) eServiceFactoryMP3
+ (41) eServiceFactoryFS
+ (41) eServiceFactoryDVB
+ (41) Encoders
+ (41) Stream server
reached rl 70
---- opening lame channel db
reading services (version 4)
loaded 242 channels/transponders and 6848 services
scanning for frontends..
opening frontend 0
close frontend 0
found 1 adapter, 1 frontends(1 sim) and 7 demux, boxtype 3
RTC not ready... wait for transponder time
[EPGC] Initialized EPGCache (wait for setCacheFile call now)
[ePNG] couldn't open /usr/share/enigma2/skin_default/spinner/wait13.png
found 12 spinner!
executing main
setIoPrio best-effort level 3 ok
main thread is non-idle! display spinner!
couldn't open /proc/stb/misc/12V_output
Scanning hardware info
Detected: e3hd (0.91-1405161402)
[Harddisk] enumerating block devices...
new Harddisk sda -> /dev/sda -> /dev/sda
SKIN ERROR: {skin_display.xml}: display skin not found. Please contact the skin'
s author!
defaulting to standard display skin... skin_display.xml
Reading satellites.xml
sec config cleared
setSlotInfo for dvb frontend 0 to slotid 0, descr BCM7346 (internal), need rotor
workaround No, enabled Yes, DVB-S2 Yes
slot: 0 configmode: simple
diseqcmode: diseqc_a_b
sec config completed
Renumbering...
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropr
iate ioctl for device >
Activating keymap: Default (US)
[ePopen] command: loadkmap < /usr/share/keymaps/default.kmap
Activating language English
--> setting scaler_sharpness to: 0000000D
[ePopen] command: ip -o addr show dev eth0
FIXME: request for unknown slot
FIXME: request for unknown slot
FIXME: request for unknown slot
FIXME: request for unknown slot
HDMU Center: Import evfd failed
^[[BMedia Center: Import evfd failed
[NetworkBrowser] fallback to default translation for NetworkBrowser
[NetworkBrowser] fallback to default translation for Search for network shares
[NetworkBrowser] fallback to default translation for MountManager
[NetworkBrowser] fallback to default translation for Manage network shares
[NetworkBrowser] fallback to default translation for Mount again
[NetworkBrowser] fallback to default translation for Attempt to mount shares aga
in
getModeList for port DVI-PC
remove DVI-PC because of not existing modes
getModeList for port YPbPr
getModeList for port Scart
getModeList for port DVI
hotplug on dvi
setMode - port: YPbPr mode: 720p rate: 50Hz
starting hotplug handler
[EPGC] setCacheFile read/write epg data from/to '/hdd/epg.dat'
Reading ['/usr/lib/enigma2/python/Plugins/SystemPlugins/Videomode/videowizard.x
ml']
getStepWithID: start
result: nothing
('en_EN', ('English', 'en', 'EN'))
++++++++++++***++**** VideoWizard-createSummary
[SKIN] No skin to read...
Updating values in step 1
set LCD text
wizard step: {'code': u'self["portpic"].show()\nself.clearSelectedKeys()\nself.s
electKey("OK")', 'text': 'Video input selection\n\nPlease press OK if you can se
e this page on your TV (or select a different input port).\n\nThe next input por
t will be automatically probed in 20 seconds.', 'displaytext': 'Select video inp
ut with up/down buttons', 'id': 'inputselection', 'condition': '', 'listevaluati
on': u'inputSelectionMade', 'timeoutaction': 'selectnext', 'nextstep': 'modesele
ction', 'code_async': '', 'codeafter_async': '', 'timeoutstep': '', 'list': [],
'onselect': u'inputSelectionMoved', 'dynamiclist': u'listInputChannels', 'timeou
t': 20, 'codeafter': '', 'config': {'screen': None, 'args': None, 'type': ''}}
wizard text Video input selection
Please press OK if you can see this page on your TV (or select a different input
port).
The next input port will be automatically probed in 20 seconds.
set LCD text
code self["portpic"].show()
self.clearSelectedKeys()
self.selectKey("OK")
selectPic: arrowdown
showing list, 1
self.list: <Components.Sources.List.List object at 0x12ee8d0>
self.list: <Components.Sources.List.List object at 0x12ee8d0>
self.list: <Components.Sources.List.List object at 0x12ee8d0>
self.list: <Components.Sources.List.List object at 0x12ee8d0>
self.list: <Components.Sources.List.List object at 0x12ee8d0>
self.list: <Components.Sources.List.List object at 0x12ee8d0>
setZPosition
dynamic list, calling listInputChannels
listInputChannels: [('HDMI', 'DVI'), ('Scart', 'Scart'), ('YPbPr', 'YPbPr')]
self.selection: DVI
input selection moved: DVI
inputSelect: DVI
getModeList for port DVI
modeList: [('720p', ['50Hz', 'multi', '60Hz']), ('1080p', ['50Hz', 'multi', '60H
z']), ('1080i', ['50Hz', 'multi', '60Hz']), ('576p', ['50Hz']), ('480p', ['60Hz'
]), ('576i', ['50Hz']), ('480i', ['60Hz'])]
modes for port DVI and mode 720p
getModeList for port DVI
('720p', ['50Hz', 'multi', '60Hz'])
('1080p', ['50Hz', 'multi', '60Hz'])
('1080i', ['50Hz', 'multi', '60Hz'])
('576p', ['50Hz'])
('480p', ['60Hz'])
('576i', ['50Hz'])
('480i', ['60Hz'])
setMode - port: DVI mode: 720p rate: 50Hz
self.selection: DVI
input selection moved: DVI
inputSelect: DVI
getModeList for port DVI
modeList: [('720p', ['50Hz', 'multi', '60Hz']), ('1080p', ['50Hz', 'multi', '60H
z']), ('1080i', ['50Hz', 'multi', '60Hz']), ('576p', ['50Hz']), ('480p', ['60Hz'
]), ('576i', ['50Hz']), ('480i', ['60Hz'])]
modes for port DVI and mode 720p
getModeList for port DVI
('720p', ['50Hz', 'multi', '60Hz'])
('1080p', ['50Hz', 'multi', '60Hz'])
('1080i', ['50Hz', 'multi', '60Hz'])
('576p', ['50Hz'])
('480p', ['60Hz'])
('576i', ['50Hz'])
('480i', ['60Hz'])
setMode - port: DVI mode: 720p rate: 50Hz
self.selection: DVI
input selection moved: DVI
inputSelect: DVI
getModeList for port DVI
modeList: [('720p', ['50Hz', 'multi', '60Hz']), ('1080p', ['50Hz', 'multi', '60H
z']), ('1080i', ['50Hz', 'multi', '60Hz']), ('576p', ['50Hz']), ('480p', ['60Hz'
]), ('576i', ['50Hz']), ('480i', ['60Hz'])]
modes for port DVI and mode 720p
getModeList for port DVI
('720p', ['50Hz', 'multi', '60Hz'])
('1080p', ['50Hz', 'multi', '60Hz'])
('1080i', ['50Hz', 'multi', '60Hz'])
('576p', ['50Hz'])
('480p', ['60Hz'])
('576i', ['50Hz'])
('480i', ['60Hz'])
setMode - port: DVI mode: 720p rate: 50Hz
showing config
setValue 50
Setvolume: 100 100 (raw)
Setvolume: 0 0 (-1db)
Setvolume: 50 50 (raw)
Setvolume: 32 32 (-1db)
timeoutCounter: 19
eHdmiCEC: received message 89 01
[ePopen] command: route -n | grep eth0
poll: unhandled POLLERR/HUP/NVAL for fd 29(16)
poll: unhandled POLLERR/HUP/NVAL for fd 33(16)
timeoutCounter: 18
0.0.0.0
192.168
nameservers: [[192, 168, 178, 1]]
read configured interface: {'bnep0': {'dhcp': True}, 'usb0': {'dhcp': False}, 'l
o': {'dhcp': False}, 'wlan0': {'dhcp': True}, 'atml0': {'dhcp': True}, 'eth1': {
'dhcp': True}, 'eth0': {'dhcp': True}}
self.ifaces after loading: {'eth0': {'preup': False, 'predown': False, 'ip': [19
2, 168, 178, 49], 'up': True, 'mac': '00:15:c0:15:6e:cd', 'dhcp': True, 'bcast':
[192, 168, 178, 255], 'netmask': [255, 255, 255, 0], 'gateway': [192, 168, 178,
1]}}
AT plugin not found
ER plugin not found
Traceback (most recent call last):
File "/usr/lib/enigma2/python/Tools/BoundFunction.py", line 9, in __call__
File "/usr/lib/enigma2/python/Components/Console.py", line 56, in finishedCB
File "/usr/lib/enigma2/python/Components/Network.py", line 131, in routeFinish
ed
File "/usr/lib/enigma2/python/Components/Network.py", line 226, in loadNetwork
Config
File "/usr/lib/enigma2/python/Components/Network.py", line 682, in msgPlugins
File "/home/bonkel23/neu/build/tmp/work/e3hd-oe-linux/enigma2-plugin-extension
s-openwebif/0.1+gitAUTOINC+f85d02a6c3-r0.72/git/plugin/plugin.py", line 146, in
IfUpIfDown
File "/home/bonkel23/neu/build/tmp/work/e3hd-oe-linux/enigma2-plugin-extension
s-openwebif/0.1+gitAUTOINC+f85d02a6c3-r0.72/git/plugin/httpserver.py", line 125,
in HttpdStart
File "/home/bonkel23/neu/build/tmp/work/e3hd-oe-linux/enigma2-plugin-extension
s-openwebif/0.1+gitAUTOINC+f85d02a6c3-r0.72/git/plugin/httpserver.py", line 49,
in buildRootTree
File "/home/bonkel23/neu/build/tmp/work/e3hd-oe-linux/enigma2-plugin-extension
s-openwebif/0.1+gitAUTOINC+f85d02a6c3-r0.72/git/plugin/controllers/root.py", lin
e 48, in __init__
File "/home/bonkel23/neu/build/tmp/work/e3hd-oe-linux/enigma2-plugin-extension
s-openwebif/0.1+gitAUTOINC+f85d02a6c3-r0.72/git/plugin/controllers/BQE.py", line
270, in __init__
NameError: global name 'File' is not defined
(PyObject_CallObject(<Tools.BoundFunction.boundFunction instance at 0x1351030>,(
0,)) failed)
getResolvedKey config.plugins.crashlogautosubmit.sendAnonCrashlog failed !! (Typ
o??)
getResolvedKey config.plugins.crashlogautosubmit.addNetwork failed !! (Typo??)
getResolvedKey config.plugins.crashlogautosubmit.addWlan failed !! (Typo??)
main thread is non-idle! display spinner!
poll: unhandled POLLERR/HUP/NVAL for fd 29(16)
Unhandled error in Deferred:
Unhandled Error
Traceback (most recent call last):
File "/usr/lib/python2.7/threading.py", line 524, in __bootstrap
File "/usr/lib/python2.7/threading.py", line 551, in __bootstrap_inner
File "/usr/lib/python2.7/threading.py", line 504, in run
--- <exception caught here> ---
File "/usr/lib/python2.7/site-packages/twisted/python/threadpool.py", line 207
, in _worker
File "/usr/lib/python2.7/site-packages/twisted/python/context.py", line 118, i
n callWithContext
File "/usr/lib/python2.7/site-packages/twisted/python/context.py", line 81, in
callWithContext
File "/usr/lib/enigma2/python/Components/Lcd.py", line 54, in JobTask
File "/usr/lib/python2.7/site-packages/usb/legacy.py", line 333, in busses
return (Bus(),)
File "/usr/lib/python2.7/site-packages/usb/legacy.py", line 329, in __init__
self.devices = [Device(d) for d in core.find(find_all=True)]
File "/usr/lib/python2.7/site-packages/usb/core.py", line 846, in find
raise ValueError('No backend available')
exceptions.ValueError: No backend available
connectionLost? [Failure instance: Traceback (failure with no frames): <class 't
wisted.internet.error.ConnectionLost'>: Connection to the other side was lost in
a non-clean fashion: Connection lost.
]
(exit code 5)
---- saving lame channel db
saved 242 channels and 6848 services!
release cached channel (timer timeout)
- (41) eServiceFactoryDVD
- (41) eServiceFactoryHDMI
- (41) eServiceFactoryM2TS
- (41) eServiceFactoryMP3
- (41) eServiceFactoryFS
- (41) eServiceFactoryDVB
- (41) Encoders
- (41) Stream server
- (40) eServiceCenter
clear instance
- (35) CI Slots
- (35) CA handler
- (30) eActionMap
- (22) Hdmi CEC driver
- (21) input device driver
- (20) DVB-CI UI
- (20) UHF Modulator
- (20) RC Input layer
- (20) misc options
- (20) AVSwitch Driver
- (15) eWindowStyleManager
- (10) gRC
waiting for gRC thread shutdown
gRC thread has finished
- (9) GFBDC
- (9) gLCDDC
- (9) Font Render Class
- (8) graphics acceleration manager
- (5) Tuxtxt
- (1) Background File Eraser
reached rl -1
root@e3hd:~#
Diese Version "HDMU_12756_E3HD_OE_1639_Flash" funktioniert noch.