speedy1016
13.08.2014, 09:45
nach online update erst mal ein und aus schalten dann lief die box.nach skin wechsel ging dann garnichts mehr.
hdmu 4 xpeedlx
xpeedlx login: root
Password:
Last login: Thu Jan 1 01:02:13 CET 1970 on pts/1
root
-----====== HDMU 12865 enigma2 Git 1681 ======-----
root@xpeedlx:~# setconsole
root@xpeedlx:~# [6nReading satellites.xml
sec config cleared
setSlotInfo for dvb frontend 0 to slotid 0, descr DVB-S2 INTERNAL, need rotorworkaround No, enabled Yes, DVB-S2 Yes
setSlotInfo for dvb frontend 1 to slotid 1, descr DVB-S2 NIM, need rotorworkaround No, enabled Yes, DVB-S2 Yes
slot: 0 configmode: simple
diseqcmode: single
slot: 1 configmode: simple
diseqcmode: positioner
Add sat 70
Add sat 90
Add sat 130
Add sat 160
Add sat 192
Add sat 235
Add sat 260
Add sat 282
Add sat 420
sec config completed
Renumbering...
FATAL: failed: Operation not permitted
hdmu 4 xpeedlx
xpeedlx login: root
Password:
Last login: Thu Jan 1 01:00:44 CET 1970 on pts/1
-----====== HDMU 12865 enigma2 Git 1681 ======-----
root
root@xpeedlx:~# setconsole
root@xpeedlx:~# [6nKilled
PYTHONPATH: /usr/lib/enigma2/python
+ (1) Background File Eraser
+ (5) Tuxtxt
+ (8) graphics acceleration manager
BCM accel interface not available - Inappropriate ioctl for device
+ (9) GFBDC
10800k video mem
- double buffering available!
3600kB available for acceleration surfaces.
resolution: 1280 x 720 x 32 (stride: 5120)
+ (9) gLCDDC
found OLED display!
lcd buffer 0x77bf80 8448 bytes, stride 132
LCD resolution: 132 x 64 x 8 (stride: 132)
+ (9) Font Render Class
+ (10) gRC
RC thread created successfully
+ (15) eWindowStyleManager
+ (20) DVB-CI UI
+ (20) UHF Modulator
couldnt open /dev/rfmod0!!!!
+ (20) RC Input layer
+ (20) misc options
+ (20) AVSwitch Driver
couldnt open /dev/dbox/fp0 to monitor vcr scart slow blanking changed!
+ (21) input device driver
Input device "dreambox front panel" is a remotecontrol
Input device "dreambox advanced remote control (native)" is a mouse
Found 2 input devices.
+ (22) Hdmi CEC driver
eHdmiCEC: detected physical address change: 1000 --> 2000
eHdmiCEC: send message 84 20 00 00
+ (30) eActionMap
+ (35) CI Slots
scanning for common interfaces..
CI Slot 0 setSource(0)
eDVBCIInterfaces->setInputSource(0, 0)
eDVBCIInterfaces->setInputSource(1, 1)
done, found 1 common interface slots
+ (35) CA handler
+ (40) eServiceCenter
settings instance.
+ (41) eServiceFactoryDVD
+ (41) eServiceFactoryHDMI
+ (41) eServiceFactoryM2TS
+ (41) eServiceFactoryMP3
+ (41) eServiceFactoryFS
+ (41) eServiceFactoryDVB
+ (41) Encoders
+ (41) Stream server
reached rl 70
---- opening lame channel db
reading services (version 4)
loaded 210 channels/transponders and 3721 services
scanning for frontends..
opening frontend 0
close frontend 0
opening frontend 1
close frontend 1
found 1 adapter, 2 frontends(2 sim) and 5 demux, boxtype 3
RTC not ready... wait for transponder time
[EPGC] Initialized EPGCache (wait for setCacheFile call now)
[ePNG] couldn't open /usr/share/enigma2/skin_default/spinner/wait13.png
found 12 spinner!
executing main
setIoPrio best-effort level 3 ok
Failed to open /dev/dbox/fp0
couldn't open /proc/stb/misc/12V_output
Scanning hardware info
Detected: ini-1000de (20140701)
[Harddisk] enumerating block devices...
new Harddisk sda -> /dev/sda -> /dev/sda
[ePopen] command: ('sdparm', 'sdparm', '--set=SCT=0', '/dev/sda')
[ePopen] command: ('sdparm', 'sdparm', '-C stop', '/dev/sda')
main thread is non-idle! display spinner!
Reading satellites.xml
sec config cleared
setSlotInfo for dvb frontend 0 to slotid 0, descr DVB-S2 INTERNAL, need rotorworkaround No, enabled Yes, DVB-S2 Yes
setSlotInfo for dvb frontend 1 to slotid 1, descr DVB-S2 NIM, need rotorworkaround No, enabled Yes, DVB-S2 Yes
slot: 0 configmode: simple
diseqcmode: single
slot: 1 configmode: simple
diseqcmode: positioner
Add sat 70
Add sat 90
Add sat 130
Add sat 160
Add sat 192
Add sat 235
Add sat 260
Add sat 282
Add sat 420
sec config completed
Renumbering...
FATAL: failed: Operation not permitted
Killed
PYTHONPATH: /usr/lib/enigma2/python
+ (1) Background File Eraser
+ (5) Tuxtxt
+ (8) graphics acceleration manager
BCM accel interface not available - Inappropriate ioctl for device
+ (9) GFBDC
10800k video mem
- double buffering available!
3600kB available for acceleration surfaces.
resolution: 1280 x 720 x 32 (stride: 5120)
+ (9) gLCDDC
found OLED display!
lcd buffer 0x77bf80 8448 bytes, stride 132
LCD resolution: 132 x 64 x 8 (stride: 132)
+ (9) Font Render Class
+ (10) gRC
RC thread created successfully
+ (15) eWindowStyleManager
+ (20) DVB-CI UI
+ (20) UHF Modulator
couldnt open /dev/rfmod0!!!!
+ (20) RC Input layer
+ (20) misc options
+ (20) AVSwitch Driver
couldnt open /dev/dbox/fp0 to monitor vcr scart slow blanking changed!
+ (21) input device driver
Input device "dreambox front panel" is a remotecontrol
Input device "dreambox advanced remote control (native)" is a mouse
Found 2 input devices.
+ (22) Hdmi CEC driver
eHdmiCEC: detected physical address change: 1000 --> 2000
eHdmiCEC: send message 84 20 00 00
+ (30) eActionMap
+ (35) CI Slots
scanning for common interfaces..
CI Slot 0 setSource(0)
eDVBCIInterfaces->setInputSource(0, 0)
eDVBCIInterfaces->setInputSource(1, 1)
done, found 1 common interface slots
+ (35) CA handler
+ (40) eServiceCenter
settings instance.
+ (41) eServiceFactoryDVD
+ (41) eServiceFactoryHDMI
+ (41) eServiceFactoryM2TS
+ (41) eServiceFactoryMP3
+ (41) eServiceFactoryFS
+ (41) eServiceFactoryDVB
+ (41) Encoders
+ (41) Stream server
reached rl 70
---- opening lame channel db
reading services (version 4)
loaded 210 channels/transponders and 3721 services
scanning for frontends..
opening frontend 0
close frontend 0
opening frontend 1
close frontend 1
found 1 adapter, 2 frontends(2 sim) and 5 demux, boxtype 3
RTC not ready... wait for transponder time
[EPGC] Initialized EPGCache (wait for setCacheFile call now)
[ePNG] couldn't open /usr/share/enigma2/skin_default/spinner/wait13.png
found 12 spinner!
executing main
setIoPrio best-effort level 3 ok
Failed to open /dev/dbox/fp0
couldn't open /proc/stb/misc/12V_output
Scanning hardware info
Detected: ini-1000de (20140701)
[Harddisk] enumerating block devices...
new Harddisk sda -> /dev/sda -> /dev/sda
[ePopen] command: ('sdparm', 'sdparm', '--set=SCT=0', '/dev/sda')
[ePopen] command: ('sdparm', 'sdparm', '-C stop', '/dev/sda')
main thread is non-idle! display spinner!
Reading satellites.xml
sec config cleared
setSlotInfo for dvb frontend 0 to slotid 0, descr DVB-S2 INTERNAL, need rotorworkaround No, enabled Yes, DVB-S2 Yes
setSlotInfo for dvb frontend 1 to slotid 1, descr DVB-S2 NIM, need rotorworkaround No, enabled Yes, DVB-S2 Yes
slot: 0 configmode: simple
diseqcmode: single
slot: 1 configmode: simple
diseqcmode: positioner
Add sat 70
Add sat 90
Add sat 130
Add sat 160
Add sat 192
Add sat 235
Add sat 260
Add sat 282
Add sat 420
sec config completed
Renumbering...
FATAL: failed: Operation not permitted
Killed
PYTHONPATH: /usr/lib/enigma2/python
+ (1) Background File Eraser
+ (5) Tuxtxt
+ (8) graphics acceleration manager
BCM accel interface not available - Inappropriate ioctl for device
+ (9) GFBDC
10800k video mem
- double buffering available!
3600kB available for acceleration surfaces.
resolution: 1280 x 720 x 32 (stride: 5120)
+ (9) gLCDDC
found OLED display!
lcd buffer 0x77bf80 8448 bytes, stride 132
LCD resolution: 132 x 64 x 8 (stride: 132)
+ (9) Font Render Class
+ (10) gRC
RC thread created successfully
+ (15) eWindowStyleManager
+ (20) DVB-CI UI
+ (20) UHF Modulator
couldnt open /dev/rfmod0!!!!
+ (20) RC Input layer
+ (20) misc options
+ (20) AVSwitch Driver
couldnt open /dev/dbox/fp0 to monitor vcr scart slow blanking changed!
+ (21) input device driver
Input device "dreambox front panel" is a remotecontrol
Input device "dreambox advanced remote control (native)" is a mouse
Found 2 input devices.
+ (22) Hdmi CEC driver
eHdmiCEC: detected physical address change: 1000 --> 2000
eHdmiCEC: send message 84 20 00 00
+ (30) eActionMap
+ (35) CI Slots
scanning for common interfaces..
CI Slot 0 setSource(0)
eDVBCIInterfaces->setInputSource(0, 0)
eDVBCIInterfaces->setInputSource(1, 1)
done, found 1 common interface slots
+ (35) CA handler
+ (40) eServiceCenter
settings instance.
+ (41) eServiceFactoryDVD
+ (41) eServiceFactoryHDMI
+ (41) eServiceFactoryM2TS
+ (41) eServiceFactoryMP3
+ (41) eServiceFactoryFS
+ (41) eServiceFactoryDVB
+ (41) Encoders
+ (41) Stream server
reached rl 70
---- opening lame channel db
reading services (version 4)
loaded 210 channels/transponders and 3721 services
scanning for frontends..
opening frontend 0
close frontend 0
opening frontend 1
close frontend 1
found 1 adapter, 2 frontends(2 sim) and 5 demux, boxtype 3
RTC not ready... wait for transponder time
[EPGC] Initialized EPGCache (wait for setCacheFile call now)
[ePNG] couldn't open /usr/share/enigma2/skin_default/spinner/wait13.png
found 12 spinner!
executing main
setIoPrio best-effort level 3 ok
Failed to open /dev/dbox/fp0
couldn't open /proc/stb/misc/12V_output
Scanning hardware info
Detected: ini-1000de (20140701)
[Harddisk] enumerating block devices...
new Harddisk sda -> /dev/sda -> /dev/sda
[ePopen] command: ('sdparm', 'sdparm', '--set=SCT=0', '/dev/sda')
[ePopen] command: ('sdparm', 'sdparm', '-C stop', '/dev/sda')
main thread is non-idle! display spinner!
Reading satellites.xml
sec config cleared
setSlotInfo for dvb frontend 0 to slotid 0, descr DVB-S2 INTERNAL, need rotorworkaround No, enabled Yes, DVB-S2 Yes
setSlotInfo for dvb frontend 1 to slotid 1, descr DVB-S2 NIM, need rotorworkaround No, enabled Yes, DVB-S2 Yes
slot: 0 configmode: simple
diseqcmode: single
slot: 1 configmode: simple
diseqcmode: positioner
Add sat 70
Add sat 90
Add sat 130
Add sat 160
Add sat 192
Add sat 235
Add sat 260
Add sat 282
Add sat 420
sec config completed
Renumbering...
FATAL: failed: Operation not permitted
Killed
PYTHONPATH: /usr/lib/enigma2/python
+ (1) Background File Eraser
+ (5) Tuxtxt
+ (8) graphics acceleration manager
BCM accel interface not available - Inappropriate ioctl for device
+ (9) GFBDC
10800k video mem
- double buffering available!
3600kB available for acceleration surfaces.
resolution: 1280 x 720 x 32 (stride: 5120)
+ (9) gLCDDC
found OLED display!
lcd buffer 0x77bf80 8448 bytes, stride 132
LCD resolution: 132 x 64 x 8 (stride: 132)
+ (9) Font Render Class
+ (10) gRC
RC thread created successfully
+ (15) eWindowStyleManager
+ (20) DVB-CI UI
+ (20) UHF Modulator
couldnt open /dev/rfmod0!!!!
+ (20) RC Input layer
+ (20) misc options
+ (20) AVSwitch Driver
couldnt open /dev/dbox/fp0 to monitor vcr scart slow blanking changed!
+ (21) input device driver
Input device "dreambox front panel" is a remotecontrol
Input device "dreambox advanced remote control (native)" is a mouse
Found 2 input devices.
+ (22) Hdmi CEC driver
eHdmiCEC: detected physical address change: 1000 --> 2000
eHdmiCEC: send message 84 20 00 00
+ (30) eActionMap
+ (35) CI Slots
scanning for common interfaces..
CI Slot 0 setSource(0)
eDVBCIInterfaces->setInputSource(0, 0)
eDVBCIInterfaces->setInputSource(1, 1)
done, found 1 common interface slots
+ (35) CA handler
+ (40) eServiceCenter
settings instance.
+ (41) eServiceFactoryDVD
+ (41) eServiceFactoryHDMI
+ (41) eServiceFactoryM2TS
+ (41) eServiceFactoryMP3
+ (41) eServiceFactoryFS
+ (41) eServiceFactoryDVB
+ (41) Encoders
+ (41) Stream server
reached rl 70
---- opening lame channel db
reading services (version 4)
loaded 210 channels/transponders and 3721 services
scanning for frontends..
opening frontend 0
close frontend 0
opening frontend 1
close frontend 1
found 1 adapter, 2 frontends(2 sim) and 5 demux, boxtype 3
RTC not ready... wait for transponder time
[EPGC] Initialized EPGCache (wait for setCacheFile call now)
[ePNG] couldn't open /usr/share/enigma2/skin_default/spinner/wait13.png
found 12 spinner!
executing main
setIoPrio best-effort level 3 ok
Failed to open /dev/dbox/fp0
couldn't open /proc/stb/misc/12V_output
Scanning hardware info
Detected: ini-1000de (20140701)
[Harddisk] enumerating block devices...
new Harddisk sda -> /dev/sda -> /dev/sda
[ePopen] command: ('sdparm', 'sdparm', '--set=SCT=0', '/dev/sda')
[ePopen] command: ('sdparm', 'sdparm', '-C stop', '/dev/sda')
main thread is non-idle! display spinner!
Reading satellites.xml
sec config cleared
setSlotInfo for dvb frontend 0 to slotid 0, descr DVB-S2 INTERNAL, need rotorworkaround No, enabled Yes, DVB-S2 Yes
setSlotInfo for dvb frontend 1 to slotid 1, descr DVB-S2 NIM, need rotorworkaround No, enabled Yes, DVB-S2 Yes
slot: 0 configmode: simple
diseqcmode: single
slot: 1 configmode: simple
diseqcmode: positioner
Add sat 70
Add sat 90
Add sat 130
Add sat 160
Add sat 192
Add sat 235
Add sat 260
Add sat 282
Add sat 420
sec config completed
Renumbering...
FATAL: failed: Operation not permitted
hdmu 4 xpeedlx
xpeedlx login: root
Password:
Last login: Thu Jan 1 01:02:13 CET 1970 on pts/1
root
-----====== HDMU 12865 enigma2 Git 1681 ======-----
root@xpeedlx:~# setconsole
root@xpeedlx:~# [6nReading satellites.xml
sec config cleared
setSlotInfo for dvb frontend 0 to slotid 0, descr DVB-S2 INTERNAL, need rotorworkaround No, enabled Yes, DVB-S2 Yes
setSlotInfo for dvb frontend 1 to slotid 1, descr DVB-S2 NIM, need rotorworkaround No, enabled Yes, DVB-S2 Yes
slot: 0 configmode: simple
diseqcmode: single
slot: 1 configmode: simple
diseqcmode: positioner
Add sat 70
Add sat 90
Add sat 130
Add sat 160
Add sat 192
Add sat 235
Add sat 260
Add sat 282
Add sat 420
sec config completed
Renumbering...
FATAL: failed: Operation not permitted
hdmu 4 xpeedlx
xpeedlx login: root
Password:
Last login: Thu Jan 1 01:00:44 CET 1970 on pts/1
-----====== HDMU 12865 enigma2 Git 1681 ======-----
root
root@xpeedlx:~# setconsole
root@xpeedlx:~# [6nKilled
PYTHONPATH: /usr/lib/enigma2/python
+ (1) Background File Eraser
+ (5) Tuxtxt
+ (8) graphics acceleration manager
BCM accel interface not available - Inappropriate ioctl for device
+ (9) GFBDC
10800k video mem
- double buffering available!
3600kB available for acceleration surfaces.
resolution: 1280 x 720 x 32 (stride: 5120)
+ (9) gLCDDC
found OLED display!
lcd buffer 0x77bf80 8448 bytes, stride 132
LCD resolution: 132 x 64 x 8 (stride: 132)
+ (9) Font Render Class
+ (10) gRC
RC thread created successfully
+ (15) eWindowStyleManager
+ (20) DVB-CI UI
+ (20) UHF Modulator
couldnt open /dev/rfmod0!!!!
+ (20) RC Input layer
+ (20) misc options
+ (20) AVSwitch Driver
couldnt open /dev/dbox/fp0 to monitor vcr scart slow blanking changed!
+ (21) input device driver
Input device "dreambox front panel" is a remotecontrol
Input device "dreambox advanced remote control (native)" is a mouse
Found 2 input devices.
+ (22) Hdmi CEC driver
eHdmiCEC: detected physical address change: 1000 --> 2000
eHdmiCEC: send message 84 20 00 00
+ (30) eActionMap
+ (35) CI Slots
scanning for common interfaces..
CI Slot 0 setSource(0)
eDVBCIInterfaces->setInputSource(0, 0)
eDVBCIInterfaces->setInputSource(1, 1)
done, found 1 common interface slots
+ (35) CA handler
+ (40) eServiceCenter
settings instance.
+ (41) eServiceFactoryDVD
+ (41) eServiceFactoryHDMI
+ (41) eServiceFactoryM2TS
+ (41) eServiceFactoryMP3
+ (41) eServiceFactoryFS
+ (41) eServiceFactoryDVB
+ (41) Encoders
+ (41) Stream server
reached rl 70
---- opening lame channel db
reading services (version 4)
loaded 210 channels/transponders and 3721 services
scanning for frontends..
opening frontend 0
close frontend 0
opening frontend 1
close frontend 1
found 1 adapter, 2 frontends(2 sim) and 5 demux, boxtype 3
RTC not ready... wait for transponder time
[EPGC] Initialized EPGCache (wait for setCacheFile call now)
[ePNG] couldn't open /usr/share/enigma2/skin_default/spinner/wait13.png
found 12 spinner!
executing main
setIoPrio best-effort level 3 ok
Failed to open /dev/dbox/fp0
couldn't open /proc/stb/misc/12V_output
Scanning hardware info
Detected: ini-1000de (20140701)
[Harddisk] enumerating block devices...
new Harddisk sda -> /dev/sda -> /dev/sda
[ePopen] command: ('sdparm', 'sdparm', '--set=SCT=0', '/dev/sda')
[ePopen] command: ('sdparm', 'sdparm', '-C stop', '/dev/sda')
main thread is non-idle! display spinner!
Reading satellites.xml
sec config cleared
setSlotInfo for dvb frontend 0 to slotid 0, descr DVB-S2 INTERNAL, need rotorworkaround No, enabled Yes, DVB-S2 Yes
setSlotInfo for dvb frontend 1 to slotid 1, descr DVB-S2 NIM, need rotorworkaround No, enabled Yes, DVB-S2 Yes
slot: 0 configmode: simple
diseqcmode: single
slot: 1 configmode: simple
diseqcmode: positioner
Add sat 70
Add sat 90
Add sat 130
Add sat 160
Add sat 192
Add sat 235
Add sat 260
Add sat 282
Add sat 420
sec config completed
Renumbering...
FATAL: failed: Operation not permitted
Killed
PYTHONPATH: /usr/lib/enigma2/python
+ (1) Background File Eraser
+ (5) Tuxtxt
+ (8) graphics acceleration manager
BCM accel interface not available - Inappropriate ioctl for device
+ (9) GFBDC
10800k video mem
- double buffering available!
3600kB available for acceleration surfaces.
resolution: 1280 x 720 x 32 (stride: 5120)
+ (9) gLCDDC
found OLED display!
lcd buffer 0x77bf80 8448 bytes, stride 132
LCD resolution: 132 x 64 x 8 (stride: 132)
+ (9) Font Render Class
+ (10) gRC
RC thread created successfully
+ (15) eWindowStyleManager
+ (20) DVB-CI UI
+ (20) UHF Modulator
couldnt open /dev/rfmod0!!!!
+ (20) RC Input layer
+ (20) misc options
+ (20) AVSwitch Driver
couldnt open /dev/dbox/fp0 to monitor vcr scart slow blanking changed!
+ (21) input device driver
Input device "dreambox front panel" is a remotecontrol
Input device "dreambox advanced remote control (native)" is a mouse
Found 2 input devices.
+ (22) Hdmi CEC driver
eHdmiCEC: detected physical address change: 1000 --> 2000
eHdmiCEC: send message 84 20 00 00
+ (30) eActionMap
+ (35) CI Slots
scanning for common interfaces..
CI Slot 0 setSource(0)
eDVBCIInterfaces->setInputSource(0, 0)
eDVBCIInterfaces->setInputSource(1, 1)
done, found 1 common interface slots
+ (35) CA handler
+ (40) eServiceCenter
settings instance.
+ (41) eServiceFactoryDVD
+ (41) eServiceFactoryHDMI
+ (41) eServiceFactoryM2TS
+ (41) eServiceFactoryMP3
+ (41) eServiceFactoryFS
+ (41) eServiceFactoryDVB
+ (41) Encoders
+ (41) Stream server
reached rl 70
---- opening lame channel db
reading services (version 4)
loaded 210 channels/transponders and 3721 services
scanning for frontends..
opening frontend 0
close frontend 0
opening frontend 1
close frontend 1
found 1 adapter, 2 frontends(2 sim) and 5 demux, boxtype 3
RTC not ready... wait for transponder time
[EPGC] Initialized EPGCache (wait for setCacheFile call now)
[ePNG] couldn't open /usr/share/enigma2/skin_default/spinner/wait13.png
found 12 spinner!
executing main
setIoPrio best-effort level 3 ok
Failed to open /dev/dbox/fp0
couldn't open /proc/stb/misc/12V_output
Scanning hardware info
Detected: ini-1000de (20140701)
[Harddisk] enumerating block devices...
new Harddisk sda -> /dev/sda -> /dev/sda
[ePopen] command: ('sdparm', 'sdparm', '--set=SCT=0', '/dev/sda')
[ePopen] command: ('sdparm', 'sdparm', '-C stop', '/dev/sda')
main thread is non-idle! display spinner!
Reading satellites.xml
sec config cleared
setSlotInfo for dvb frontend 0 to slotid 0, descr DVB-S2 INTERNAL, need rotorworkaround No, enabled Yes, DVB-S2 Yes
setSlotInfo for dvb frontend 1 to slotid 1, descr DVB-S2 NIM, need rotorworkaround No, enabled Yes, DVB-S2 Yes
slot: 0 configmode: simple
diseqcmode: single
slot: 1 configmode: simple
diseqcmode: positioner
Add sat 70
Add sat 90
Add sat 130
Add sat 160
Add sat 192
Add sat 235
Add sat 260
Add sat 282
Add sat 420
sec config completed
Renumbering...
FATAL: failed: Operation not permitted
Killed
PYTHONPATH: /usr/lib/enigma2/python
+ (1) Background File Eraser
+ (5) Tuxtxt
+ (8) graphics acceleration manager
BCM accel interface not available - Inappropriate ioctl for device
+ (9) GFBDC
10800k video mem
- double buffering available!
3600kB available for acceleration surfaces.
resolution: 1280 x 720 x 32 (stride: 5120)
+ (9) gLCDDC
found OLED display!
lcd buffer 0x77bf80 8448 bytes, stride 132
LCD resolution: 132 x 64 x 8 (stride: 132)
+ (9) Font Render Class
+ (10) gRC
RC thread created successfully
+ (15) eWindowStyleManager
+ (20) DVB-CI UI
+ (20) UHF Modulator
couldnt open /dev/rfmod0!!!!
+ (20) RC Input layer
+ (20) misc options
+ (20) AVSwitch Driver
couldnt open /dev/dbox/fp0 to monitor vcr scart slow blanking changed!
+ (21) input device driver
Input device "dreambox front panel" is a remotecontrol
Input device "dreambox advanced remote control (native)" is a mouse
Found 2 input devices.
+ (22) Hdmi CEC driver
eHdmiCEC: detected physical address change: 1000 --> 2000
eHdmiCEC: send message 84 20 00 00
+ (30) eActionMap
+ (35) CI Slots
scanning for common interfaces..
CI Slot 0 setSource(0)
eDVBCIInterfaces->setInputSource(0, 0)
eDVBCIInterfaces->setInputSource(1, 1)
done, found 1 common interface slots
+ (35) CA handler
+ (40) eServiceCenter
settings instance.
+ (41) eServiceFactoryDVD
+ (41) eServiceFactoryHDMI
+ (41) eServiceFactoryM2TS
+ (41) eServiceFactoryMP3
+ (41) eServiceFactoryFS
+ (41) eServiceFactoryDVB
+ (41) Encoders
+ (41) Stream server
reached rl 70
---- opening lame channel db
reading services (version 4)
loaded 210 channels/transponders and 3721 services
scanning for frontends..
opening frontend 0
close frontend 0
opening frontend 1
close frontend 1
found 1 adapter, 2 frontends(2 sim) and 5 demux, boxtype 3
RTC not ready... wait for transponder time
[EPGC] Initialized EPGCache (wait for setCacheFile call now)
[ePNG] couldn't open /usr/share/enigma2/skin_default/spinner/wait13.png
found 12 spinner!
executing main
setIoPrio best-effort level 3 ok
Failed to open /dev/dbox/fp0
couldn't open /proc/stb/misc/12V_output
Scanning hardware info
Detected: ini-1000de (20140701)
[Harddisk] enumerating block devices...
new Harddisk sda -> /dev/sda -> /dev/sda
[ePopen] command: ('sdparm', 'sdparm', '--set=SCT=0', '/dev/sda')
[ePopen] command: ('sdparm', 'sdparm', '-C stop', '/dev/sda')
main thread is non-idle! display spinner!
Reading satellites.xml
sec config cleared
setSlotInfo for dvb frontend 0 to slotid 0, descr DVB-S2 INTERNAL, need rotorworkaround No, enabled Yes, DVB-S2 Yes
setSlotInfo for dvb frontend 1 to slotid 1, descr DVB-S2 NIM, need rotorworkaround No, enabled Yes, DVB-S2 Yes
slot: 0 configmode: simple
diseqcmode: single
slot: 1 configmode: simple
diseqcmode: positioner
Add sat 70
Add sat 90
Add sat 130
Add sat 160
Add sat 192
Add sat 235
Add sat 260
Add sat 282
Add sat 420
sec config completed
Renumbering...
FATAL: failed: Operation not permitted
Killed
PYTHONPATH: /usr/lib/enigma2/python
+ (1) Background File Eraser
+ (5) Tuxtxt
+ (8) graphics acceleration manager
BCM accel interface not available - Inappropriate ioctl for device
+ (9) GFBDC
10800k video mem
- double buffering available!
3600kB available for acceleration surfaces.
resolution: 1280 x 720 x 32 (stride: 5120)
+ (9) gLCDDC
found OLED display!
lcd buffer 0x77bf80 8448 bytes, stride 132
LCD resolution: 132 x 64 x 8 (stride: 132)
+ (9) Font Render Class
+ (10) gRC
RC thread created successfully
+ (15) eWindowStyleManager
+ (20) DVB-CI UI
+ (20) UHF Modulator
couldnt open /dev/rfmod0!!!!
+ (20) RC Input layer
+ (20) misc options
+ (20) AVSwitch Driver
couldnt open /dev/dbox/fp0 to monitor vcr scart slow blanking changed!
+ (21) input device driver
Input device "dreambox front panel" is a remotecontrol
Input device "dreambox advanced remote control (native)" is a mouse
Found 2 input devices.
+ (22) Hdmi CEC driver
eHdmiCEC: detected physical address change: 1000 --> 2000
eHdmiCEC: send message 84 20 00 00
+ (30) eActionMap
+ (35) CI Slots
scanning for common interfaces..
CI Slot 0 setSource(0)
eDVBCIInterfaces->setInputSource(0, 0)
eDVBCIInterfaces->setInputSource(1, 1)
done, found 1 common interface slots
+ (35) CA handler
+ (40) eServiceCenter
settings instance.
+ (41) eServiceFactoryDVD
+ (41) eServiceFactoryHDMI
+ (41) eServiceFactoryM2TS
+ (41) eServiceFactoryMP3
+ (41) eServiceFactoryFS
+ (41) eServiceFactoryDVB
+ (41) Encoders
+ (41) Stream server
reached rl 70
---- opening lame channel db
reading services (version 4)
loaded 210 channels/transponders and 3721 services
scanning for frontends..
opening frontend 0
close frontend 0
opening frontend 1
close frontend 1
found 1 adapter, 2 frontends(2 sim) and 5 demux, boxtype 3
RTC not ready... wait for transponder time
[EPGC] Initialized EPGCache (wait for setCacheFile call now)
[ePNG] couldn't open /usr/share/enigma2/skin_default/spinner/wait13.png
found 12 spinner!
executing main
setIoPrio best-effort level 3 ok
Failed to open /dev/dbox/fp0
couldn't open /proc/stb/misc/12V_output
Scanning hardware info
Detected: ini-1000de (20140701)
[Harddisk] enumerating block devices...
new Harddisk sda -> /dev/sda -> /dev/sda
[ePopen] command: ('sdparm', 'sdparm', '--set=SCT=0', '/dev/sda')
[ePopen] command: ('sdparm', 'sdparm', '-C stop', '/dev/sda')
main thread is non-idle! display spinner!
Reading satellites.xml
sec config cleared
setSlotInfo for dvb frontend 0 to slotid 0, descr DVB-S2 INTERNAL, need rotorworkaround No, enabled Yes, DVB-S2 Yes
setSlotInfo for dvb frontend 1 to slotid 1, descr DVB-S2 NIM, need rotorworkaround No, enabled Yes, DVB-S2 Yes
slot: 0 configmode: simple
diseqcmode: single
slot: 1 configmode: simple
diseqcmode: positioner
Add sat 70
Add sat 90
Add sat 130
Add sat 160
Add sat 192
Add sat 235
Add sat 260
Add sat 282
Add sat 420
sec config completed
Renumbering...
FATAL: failed: Operation not permitted