taha
14.08.2014, 15:56
hi
ImageHDMU_12704_E2_1008g+se+_215_git_3067_nodebug_ mix_USB.zip (http://images.hdmedia-universe.com/1008g+se+/HDMU_12704_E2_1008g+se+_215_git_3067_nodebug_mix_U SB.zip) does not accept inauguration remains stuck on Run
log
(Re)start USB...
Front USB: scanning bus for devices... 3 USB Device(s) found
scanning bus for storage devices... 1 Storage Device(s) found
262144000 root.img
3007176 uimage
2 file(s), 0 dir(s)
reading uImage
.................................................. .................................................. .................................................. .................................................. .................................................. ...........................................
ret=> 3007176
Wait [1]
Wait [2]
Wait [3]
Wait [4]
Wait [5]
Wait [6]
ext2fs_check_if_mount: Can't check if filesystem is mounted due to missing mtab file while determining whether /mnt/root.img is mounted.
/mnt/root.img: recovering journal
/mnt/root.img: clean, 5211/64000 files, 93999/256000 blocks
mount root
INIT: version 2.88 booting
init frontpanel
Mount /dev in tmpfs
Copying device nodes to /dev
Starting portmap daemon....
Loading autofs
Starting autofs
Mounting local filesystems...
mount: mounting LABEL=RECORD on /hdd failed: No such file or directory
swapon: using /etc/fstab
Cleaning /tmp.
Hostname: 1008G+SE+.
init stmfb
LOADING MODULES
load firmware
copLoadFile (file /boot/audio.elf)
ustslave: Kernel Version: 24
base_address 0x40400000
seeking to 0
seeking to 5e00
seeking to 12460
seeking to 1ab60
seeking to 154300
seeking to 154338
seeking to 154370
seeking to 191a58
seeking to 191a60
seeking to 191a68
seeking to 191a70
seeking to 1aae40
seeking to 1aaf00
copLoadFile (file /boot/video.elf)
ustslave: Kernel Version: 24
base_address 0x40000000
seeking to 0
seeking to 60980
seeking to 148478
seeking to 1484b0
seeking to 1484e8
seeking to 158858
seeking to 158864
seeking to 158880
seeking to 184d94
seeking to 186e00
init embx
init AVS
skip mpeg2
Model: 'hs7810a'
vBoxType: 8
Input device name: "TDT RC event driver"
Selected Remote: Fortis RemoteControl
RemoteControl Map:
MENU - 04 - 139
RED - 4B - 398
GREEN - 4A - 399
YELLOW - 49 - 400
BLUE - 48 - 401
EXIT - 1C - 102
TEXT - 0D - 388
EPG - 08 - 365
REWIND - 58 - 168
FASTFORWARD - 5C - 208
PLAY - 55 - 207
PAUSE - 07 - 119
RECORD - 56 - 167
STOP - 54 - 128
STANDBY - 0A - 116
MUTE - 0C - 113
CHANNELUP - 5E - 104
CHANNELDOWN - 5F - 109
VOLUMEUP - 4E - 115
VOLUMEDOWN - 4F - 114
INFO - 06 - 138
OK - 1F - 352
UP - 00 - 103
RIGHT - 02 - 106
DOWN - 01 - 108
LEFT - 03 - 105
RECALL - 09 - 396
ZOOM - 0B - 372
VFORMAT - 0E - 371
RESOLUTION - 0F - 375
TVRADIO - 1A - 373
SLEEP - 1E - 409
OPEN - 40 - 394
FAV - 41 - 364
CHECK - 42 - 353
UPUP - 43 - 414
DOWNDOWN - 44 - 415
NEXT - 4C - 407
LAST - 50 - 412
PIP - 51 - 357
SWAP - 52 - 354
LIST - 53 - 370
0BUTTON - 10 - 11
1BUTTON - 11 - 2
2BUTTON - 12 - 3
3BUTTON - 13 - 4
4BUTTON - 14 - 5
5BUTTON - 15 - 6
6BUTTON - 16 - 7
7BUTTON - 17 - 8
8BUTTON - 18 - 9
9BUTTON - 19 - 10
Frontpanel Map:
STANDBY - 00 - 116
OK - 06 - 352
MENU - 05 - 139
VOLUMEUP - 03 - 115
VOLUMEDOWN - 04 - 114
CHANNELUP - 01 - 104
CHANNELDOWN - 02 - 109
Supports Long KeyPress: 1
processComplex >
period 10, delay 120
Using period=10 delay=120
[SEM] DOWN
Mounting local filesystems...
showSinglePic /boot/bootlogo.mvi
VIDEO_SELECT_SOURCE MEMORY (Success)
VIDEO_PLAY (Success)
VIDEO_CONTINUE: (Success)
VIDEO_CLEAR_BUFFER: (Invalid argument)
Deconfiguring network interfaces... mount: mounting LABEL=RECORD on /hdd failed: No such file or directory
swapon: using /etc/fstab
ifdown: interface wlan0 not configured
done.
[set_was_timer_wakeup] error reading /etc/enigma2/timers.xml
[set_was_timer_wakeup] no timer aktiv
Invalid card number.
Usage: amixer <options> command
Available options:
-h,--help this help
-c,--card N select the card
-D,--device N select the device, default 'default'
-d,--debug debug mode
-n,--nocheck do not perform range checking
-v,--version print version of this program
-q,--quiet be quiet
-i,--inactive show also inactive controls
-a,--abstract L select abstraction level (none or basic)
Available commands:
scontrols show all mixer simple controls
scontents show contents of all mixer simple controls (default command)
sset sID P set contents for one mixer simple control
sget sID get contents for one mixer simple control
controls show all controls for given card
contents show contents of all controls for given card
cset cID P set control contents for one control
Invalid card number.
Usage: amixer <options> command
Available options:
-h,--help this help
-c,--card N select the card
cget cID get control contents for one control
-D,--device N select the device, default 'default'
-d,--debug debug mode
-n,--nocheck do not perform range checking
-v,--version print version of this program
-q,--quiet be quiet
-i,--inactive show also inactive controls
-a,--abstract L select abstraction level (none or basic)
Available commands:
scontrols show all mixer simple controls
scontents show contents of all mixer simple controls (default command)
sset sID P set contents for one mixer simple control
sget sID get contents for one mixer simple control
controls show all controls for given card
contents show contents of all controls for given card
cset cID P set control contents for one control
cget cID get control contents for one control
Invalid card number.
Usage: amixer <options> command
Available options:
-h,--help this help
-c,--card N select the card
-D,--device N select the device, default 'default'
-d,--debug debug mode
-n,--nocheck do not perform range checking
-v,--version print version of this program
-q,--quiet be quiet
-i,--inactive show also inactive controls
-a,--abstract L select abstraction level (none or basic)
Available commands:
scontrols show all mixer simple controls
scontents show contents of all mixer simple controls (default command)
sset sID P set contents for one mixer simple control
sget sID get contents for one mixer simple control
controls show all controls for given card
contents show contents of all controls for given card
cset cID P set control contents for one control
cget cID get control contents for one control
starting e2->
Setting up IP spoofing protection: rp_filter.
Configuring network interfaces... udhcpc (v1.22.1) started
mount: mounting LABEL=RECORD on /hdd failed: No such file or directory
Sending discover...
PYTHONPATH: /usr/lib/enigma2/python
Sending discover...
+ (1) Background File Eraser
+ (5) Tuxtxt
+ (8) graphics acceleration manager
STMFB accel interface available
+ (9) GFBDC
20480k total video mem
12380k usable video mem
10760kB available for acceleration surfaces.
resolution: 720 x 576 x 32 (stride: 2880)
+ (9) gLCDDC
eDBoxLCD::eDBoxLCD >
Error loading config file!
LCD resolution: -1 x -1 x 1744829664 (stride: 1392509028)
+ (9) Font Render Class
+ (10) gRC
RC thread created successfully
+ (15) eWindowStyleManager
+ (20) DVB-CI UI
+ (20) RC Input layer
+ (20) misc options
+ (20) AVSwitch Driver
couldnt open /dev/dbox/fp0 to monitor vcr scart slow blanking changed!
+ (21) input device driver
Input device "HDMU RC FORTIS" is a remotecontrol
failed to open /dev/input/event1
Input device "HDMU RC FORTIS" is a remotecontrol
failed to open /dev/input/event2
Input device "HDMU RC FORTIS" is a remotecontrol
failed to open /dev/input/event3
Input device "HDMU RC FORTIS" is a mouse
Found 4 input devices.
+ (22) Hdmi CEC driver
+ (30) eActionMap
+ (35) CI Slots
scanning for common interfaces..
CI Slot 0: reset requested
CI Slot 1: reset requested
CI Slot 0 setSource(0)
CI Slot 1 setSource(0)
eDVBCIInterfaces->setInputSource(0, 0)
eDVBCIInterfaces->setInputSource(1, 1)
cannot open /proc/stb/tsmux/input2
cannot open /proc/stb/tsmux/input3
done, found 2 common interface slots
+ (35) CA handler
+ (40) eServiceCenter
settings instance.
+ (41) eServiceFactoryDVD
+ (41) eServiceFactoryEPlayer3
+ (41) eServiceFactoryHDMI
+ (41) eServiceFactoryM2TS
+ (41) eServiceFactoryMP3
+ (41) eServiceFactoryFS
+ (41) eServiceFactoryDVB
+ (41) Encoders
+ (41) Stream server
[SERVERSOCKET] ERROR on bind() (Address already in use)
reached rl 70
---- opening lame channel db
reading services (version 4)
loaded 242 channels/transponders and 6848 services
scanning for frontends..
opening frontend 0
frontend successfully opened
close frontend 0
found 1 adapter, 1 frontends(1 sim) and 2 demux, boxtype 31
RTC not ready... wait for transponder time
[EPGC] Initialized EPGCache (wait for setCacheFile call now)
[ePNG] couldn't open /usr/local/share/enigma2/skin_default/spinner/wait13.png
found 12 spinner!
executing main
setIoPrio best-effort level 3 ok
main thread is non-idle! display spinner!
Sending discover...
Sending select for 192.168.1.9...
Lease of 192.168.1.9 obtained, lease time 86400
route: SIOCDELRT: No such process
adding dns 192.168.1.1
Failed to open /dev/dbox/fp0
Scanning hardware info
Detected: hs7810a
ifconfig: SIOCGIFFLAGS: No such device
done.
[Harddisk] enumerating block devices...
new Harddisk sda -> /dev/sda -> /dev/sda
Reading satellites.xml
sec config cleared
setSlotInfo for dvb frontend 0 to slotid 0, descr STV090x Multistandard, need rotorworkaround No, enabled Yes, DVB-S2 Yes
slot: 0 configmode: simple
diseqcmode: single
sec config completed
[InfoBar] Failed to load resumepoints: [Errno 2] No such file or directory: '/etc/enigma2/resumepoints.pkl'
Renumbering...
8780kB available for acceleration surfaces.
resolution: 1280 x 720 x 32 (stride: 5120)
FATAL: failed: Operation not permitted
df: /tmp/autoYdTji7: No such file or directory
df: /tmp/autoyyrXt7: No such file or directory
Killed
e2 ended <- RTV: 137
*
ERROR
starting e2->
PYTHONPATH: /usr/lib/enigma2/python
+ (1) Background File Eraser
+ (5) Tuxtxt
+ (8) graphics acceleration manager
STMFB accel interface available
+ (9) GFBDC
20480k total video mem
12380k usable video mem
10760kB available for acceleration surfaces.
resolution: 720 x 576 x 32 (stride: 2880)
+ (9) gLCDDC
eDBoxLCD::eDBoxLCD >
Error loading config file!
LCD resolution: -1 x -1 x 1744829664 (stride: 1392509028)
+ (9) Font Render Class
+ (10) gRC
RC thread created successfully
+ (15) eWindowStyleManager
+ (20) DVB-CI UI
+ (20) RC Input layer
+ (20) misc options
+ (20) AVSwitch Driver
couldnt open /dev/dbox/fp0 to monitor vcr scart slow blanking changed!
+ (21) input device driver
Input device "HDMU RC FORTIS" is a remotecontrol
failed to open /dev/input/event1
Input device "HDMU RC FORTIS" is a remotecontrol
failed to open /dev/input/event2
Input device "HDMU RC FORTIS" is a remotecontrol
failed to open /dev/input/event3
Input device "HDMU RC FORTIS" is a mouse
Found 4 input devices.
+ (22) Hdmi CEC driver
+ (30) eActionMap
+ (35) CI Slots
scanning for common interfaces..
CI Slot 0: reset requested
CI Slot 1: reset requested
CI Slot 0 setSource(0)
CI Slot 1 setSource(0)
eDVBCIInterfaces->setInputSource(0, 0)
eDVBCIInterfaces->setInputSource(1, 1)
cannot open /proc/stb/tsmux/input2
cannot open /proc/stb/tsmux/input3
done, found 2 common interface slots
+ (35) CA handler
+ (40) eServiceCenter
settings instance.
+ (41) eServiceFactoryDVD
+ (41) eServiceFactoryEPlayer3
+ (41) eServiceFactoryHDMI
+ (41) eServiceFactoryM2TS
+ (41) eServiceFactoryMP3
+ (41) eServiceFactoryFS
+ (41) eServiceFactoryDVB
+ (41) Encoders
+ (41) Stream server
[SERVERSOCKET] ERROR on bind() (Address already in use)
reached rl 70
---- opening lame channel db
reading services (version 4)
loaded 242 channels/transponders and 6848 services
scanning for frontends..
opening frontend 0
frontend successfully opened
close frontend 0
found 1 adapter, 1 frontends(1 sim) and 2 demux, boxtype 31
RTC not ready... wait for transponder time
[EPGC] Initialized EPGCache (wait for setCacheFile call now)
[ePNG] couldn't open /usr/local/share/enigma2/skin_default/spinner/wait13.png
found 12 spinner!
executing main
setIoPrio best-effort level 3 ok
main thread is non-idle! display spinner!
Failed to open /dev/dbox/fp0
Scanning hardware info
Detected: hs7810a
[Harddisk] enumerating block devices...
new Harddisk sda -> /dev/sda -> /dev/sda
Reading satellites.xml
sec config cleared
setSlotInfo for dvb frontend 0 to slotid 0, descr STV090x Multistandard, need rotorworkaround No, enabled Yes, DVB-S2 Yes
slot: 0 configmode: simple
diseqcmode: single
sec config completed
[InfoBar] Failed to load resumepoints: [Errno 2] No such file or directory: '/etc/enigma2/resumepoints.pkl'
Renumbering...
8780kB available for acceleration surfaces.
resolution: 1280 x 720 x 32 (stride: 5120)
FATAL: failed: Operation not permitted
df: /tmp/autoYdTji7: No such file or directory
df: /tmp/autoyyrXt7: No such file or directory
Killed
e2 ended <- RTV: 137
*
ERROR
starting e2->
PYTHONPATH: /usr/lib/enigma2/python
+ (1) Background File Eraser
+ (5) Tuxtxt
+ (8) graphics acceleration manager
STMFB accel interface available
+ (9) GFBDC
20480k total video mem
12380k usable video mem
10760kB available for acceleration surfaces.
resolution: 720 x 576 x 32 (stride: 2880)
+ (9) gLCDDC
eDBoxLCD::eDBoxLCD >
Error loading config file!
LCD resolution: -1 x -1 x 1744829664 (stride: 1392509028)
+ (9) Font Render Class
+ (10) gRC
RC thread created successfully
+ (15) eWindowStyleManager
+ (20) DVB-CI UI
+ (20) RC Input layer
+ (20) misc options
+ (20) AVSwitch Driver
couldnt open /dev/dbox/fp0 to monitor vcr scart slow blanking changed!
+ (21) input device driver
Input device "HDMU RC FORTIS" is a remotecontrol
failed to open /dev/input/event1
Input device "HDMU RC FORTIS" is a remotecontrol
failed to open /dev/input/event2
Input device "HDMU RC FORTIS" is a remotecontrol
failed to open /dev/input/event3
Input device "HDMU RC FORTIS" is a mouse
Found 4 input devices.
+ (22) Hdmi CEC driver
+ (30) eActionMap
+ (35) CI Slots
scanning for common interfaces..
CI Slot 0: reset requested
CI Slot 1: reset requested
CI Slot 0 setSource(0)
CI Slot 1 setSource(0)
eDVBCIInterfaces->setInputSource(0, 0)
eDVBCIInterfaces->setInputSource(1, 1)
cannot open /proc/stb/tsmux/input2
cannot open /proc/stb/tsmux/input3
done, found 2 common interface slots
+ (35) CA handler
+ (40) eServiceCenter
settings instance.
+ (41) eServiceFactoryDVD
+ (41) eServiceFactoryEPlayer3
+ (41) eServiceFactoryHDMI
+ (41) eServiceFactoryM2TS
+ (41) eServiceFactoryMP3
+ (41) eServiceFactoryFS
+ (41) eServiceFactoryDVB
+ (41) Encoders
+ (41) Stream server
[SERVERSOCKET] ERROR on bind() (Address already in use)
reached rl 70
---- opening lame channel db
reading services (version 4)
loaded 242 channels/transponders and 6848 services
scanning for frontends..
opening frontend 0
frontend successfully opened
close frontend 0
found 1 adapter, 1 frontends(1 sim) and 2 demux, boxtype 31
RTC not ready... wait for transponder time
[EPGC] Initialized EPGCache (wait for setCacheFile call now)
[ePNG] couldn't open /usr/local/share/enigma2/skin_default/spinner/wait13.png
found 12 spinner!
ImageHDMU_12704_E2_1008g+se+_215_git_3067_nodebug_ mix_USB.zip (http://images.hdmedia-universe.com/1008g+se+/HDMU_12704_E2_1008g+se+_215_git_3067_nodebug_mix_U SB.zip) does not accept inauguration remains stuck on Run
log
(Re)start USB...
Front USB: scanning bus for devices... 3 USB Device(s) found
scanning bus for storage devices... 1 Storage Device(s) found
262144000 root.img
3007176 uimage
2 file(s), 0 dir(s)
reading uImage
.................................................. .................................................. .................................................. .................................................. .................................................. ...........................................
ret=> 3007176
Wait [1]
Wait [2]
Wait [3]
Wait [4]
Wait [5]
Wait [6]
ext2fs_check_if_mount: Can't check if filesystem is mounted due to missing mtab file while determining whether /mnt/root.img is mounted.
/mnt/root.img: recovering journal
/mnt/root.img: clean, 5211/64000 files, 93999/256000 blocks
mount root
INIT: version 2.88 booting
init frontpanel
Mount /dev in tmpfs
Copying device nodes to /dev
Starting portmap daemon....
Loading autofs
Starting autofs
Mounting local filesystems...
mount: mounting LABEL=RECORD on /hdd failed: No such file or directory
swapon: using /etc/fstab
Cleaning /tmp.
Hostname: 1008G+SE+.
init stmfb
LOADING MODULES
load firmware
copLoadFile (file /boot/audio.elf)
ustslave: Kernel Version: 24
base_address 0x40400000
seeking to 0
seeking to 5e00
seeking to 12460
seeking to 1ab60
seeking to 154300
seeking to 154338
seeking to 154370
seeking to 191a58
seeking to 191a60
seeking to 191a68
seeking to 191a70
seeking to 1aae40
seeking to 1aaf00
copLoadFile (file /boot/video.elf)
ustslave: Kernel Version: 24
base_address 0x40000000
seeking to 0
seeking to 60980
seeking to 148478
seeking to 1484b0
seeking to 1484e8
seeking to 158858
seeking to 158864
seeking to 158880
seeking to 184d94
seeking to 186e00
init embx
init AVS
skip mpeg2
Model: 'hs7810a'
vBoxType: 8
Input device name: "TDT RC event driver"
Selected Remote: Fortis RemoteControl
RemoteControl Map:
MENU - 04 - 139
RED - 4B - 398
GREEN - 4A - 399
YELLOW - 49 - 400
BLUE - 48 - 401
EXIT - 1C - 102
TEXT - 0D - 388
EPG - 08 - 365
REWIND - 58 - 168
FASTFORWARD - 5C - 208
PLAY - 55 - 207
PAUSE - 07 - 119
RECORD - 56 - 167
STOP - 54 - 128
STANDBY - 0A - 116
MUTE - 0C - 113
CHANNELUP - 5E - 104
CHANNELDOWN - 5F - 109
VOLUMEUP - 4E - 115
VOLUMEDOWN - 4F - 114
INFO - 06 - 138
OK - 1F - 352
UP - 00 - 103
RIGHT - 02 - 106
DOWN - 01 - 108
LEFT - 03 - 105
RECALL - 09 - 396
ZOOM - 0B - 372
VFORMAT - 0E - 371
RESOLUTION - 0F - 375
TVRADIO - 1A - 373
SLEEP - 1E - 409
OPEN - 40 - 394
FAV - 41 - 364
CHECK - 42 - 353
UPUP - 43 - 414
DOWNDOWN - 44 - 415
NEXT - 4C - 407
LAST - 50 - 412
PIP - 51 - 357
SWAP - 52 - 354
LIST - 53 - 370
0BUTTON - 10 - 11
1BUTTON - 11 - 2
2BUTTON - 12 - 3
3BUTTON - 13 - 4
4BUTTON - 14 - 5
5BUTTON - 15 - 6
6BUTTON - 16 - 7
7BUTTON - 17 - 8
8BUTTON - 18 - 9
9BUTTON - 19 - 10
Frontpanel Map:
STANDBY - 00 - 116
OK - 06 - 352
MENU - 05 - 139
VOLUMEUP - 03 - 115
VOLUMEDOWN - 04 - 114
CHANNELUP - 01 - 104
CHANNELDOWN - 02 - 109
Supports Long KeyPress: 1
processComplex >
period 10, delay 120
Using period=10 delay=120
[SEM] DOWN
Mounting local filesystems...
showSinglePic /boot/bootlogo.mvi
VIDEO_SELECT_SOURCE MEMORY (Success)
VIDEO_PLAY (Success)
VIDEO_CONTINUE: (Success)
VIDEO_CLEAR_BUFFER: (Invalid argument)
Deconfiguring network interfaces... mount: mounting LABEL=RECORD on /hdd failed: No such file or directory
swapon: using /etc/fstab
ifdown: interface wlan0 not configured
done.
[set_was_timer_wakeup] error reading /etc/enigma2/timers.xml
[set_was_timer_wakeup] no timer aktiv
Invalid card number.
Usage: amixer <options> command
Available options:
-h,--help this help
-c,--card N select the card
-D,--device N select the device, default 'default'
-d,--debug debug mode
-n,--nocheck do not perform range checking
-v,--version print version of this program
-q,--quiet be quiet
-i,--inactive show also inactive controls
-a,--abstract L select abstraction level (none or basic)
Available commands:
scontrols show all mixer simple controls
scontents show contents of all mixer simple controls (default command)
sset sID P set contents for one mixer simple control
sget sID get contents for one mixer simple control
controls show all controls for given card
contents show contents of all controls for given card
cset cID P set control contents for one control
Invalid card number.
Usage: amixer <options> command
Available options:
-h,--help this help
-c,--card N select the card
cget cID get control contents for one control
-D,--device N select the device, default 'default'
-d,--debug debug mode
-n,--nocheck do not perform range checking
-v,--version print version of this program
-q,--quiet be quiet
-i,--inactive show also inactive controls
-a,--abstract L select abstraction level (none or basic)
Available commands:
scontrols show all mixer simple controls
scontents show contents of all mixer simple controls (default command)
sset sID P set contents for one mixer simple control
sget sID get contents for one mixer simple control
controls show all controls for given card
contents show contents of all controls for given card
cset cID P set control contents for one control
cget cID get control contents for one control
Invalid card number.
Usage: amixer <options> command
Available options:
-h,--help this help
-c,--card N select the card
-D,--device N select the device, default 'default'
-d,--debug debug mode
-n,--nocheck do not perform range checking
-v,--version print version of this program
-q,--quiet be quiet
-i,--inactive show also inactive controls
-a,--abstract L select abstraction level (none or basic)
Available commands:
scontrols show all mixer simple controls
scontents show contents of all mixer simple controls (default command)
sset sID P set contents for one mixer simple control
sget sID get contents for one mixer simple control
controls show all controls for given card
contents show contents of all controls for given card
cset cID P set control contents for one control
cget cID get control contents for one control
starting e2->
Setting up IP spoofing protection: rp_filter.
Configuring network interfaces... udhcpc (v1.22.1) started
mount: mounting LABEL=RECORD on /hdd failed: No such file or directory
Sending discover...
PYTHONPATH: /usr/lib/enigma2/python
Sending discover...
+ (1) Background File Eraser
+ (5) Tuxtxt
+ (8) graphics acceleration manager
STMFB accel interface available
+ (9) GFBDC
20480k total video mem
12380k usable video mem
10760kB available for acceleration surfaces.
resolution: 720 x 576 x 32 (stride: 2880)
+ (9) gLCDDC
eDBoxLCD::eDBoxLCD >
Error loading config file!
LCD resolution: -1 x -1 x 1744829664 (stride: 1392509028)
+ (9) Font Render Class
+ (10) gRC
RC thread created successfully
+ (15) eWindowStyleManager
+ (20) DVB-CI UI
+ (20) RC Input layer
+ (20) misc options
+ (20) AVSwitch Driver
couldnt open /dev/dbox/fp0 to monitor vcr scart slow blanking changed!
+ (21) input device driver
Input device "HDMU RC FORTIS" is a remotecontrol
failed to open /dev/input/event1
Input device "HDMU RC FORTIS" is a remotecontrol
failed to open /dev/input/event2
Input device "HDMU RC FORTIS" is a remotecontrol
failed to open /dev/input/event3
Input device "HDMU RC FORTIS" is a mouse
Found 4 input devices.
+ (22) Hdmi CEC driver
+ (30) eActionMap
+ (35) CI Slots
scanning for common interfaces..
CI Slot 0: reset requested
CI Slot 1: reset requested
CI Slot 0 setSource(0)
CI Slot 1 setSource(0)
eDVBCIInterfaces->setInputSource(0, 0)
eDVBCIInterfaces->setInputSource(1, 1)
cannot open /proc/stb/tsmux/input2
cannot open /proc/stb/tsmux/input3
done, found 2 common interface slots
+ (35) CA handler
+ (40) eServiceCenter
settings instance.
+ (41) eServiceFactoryDVD
+ (41) eServiceFactoryEPlayer3
+ (41) eServiceFactoryHDMI
+ (41) eServiceFactoryM2TS
+ (41) eServiceFactoryMP3
+ (41) eServiceFactoryFS
+ (41) eServiceFactoryDVB
+ (41) Encoders
+ (41) Stream server
[SERVERSOCKET] ERROR on bind() (Address already in use)
reached rl 70
---- opening lame channel db
reading services (version 4)
loaded 242 channels/transponders and 6848 services
scanning for frontends..
opening frontend 0
frontend successfully opened
close frontend 0
found 1 adapter, 1 frontends(1 sim) and 2 demux, boxtype 31
RTC not ready... wait for transponder time
[EPGC] Initialized EPGCache (wait for setCacheFile call now)
[ePNG] couldn't open /usr/local/share/enigma2/skin_default/spinner/wait13.png
found 12 spinner!
executing main
setIoPrio best-effort level 3 ok
main thread is non-idle! display spinner!
Sending discover...
Sending select for 192.168.1.9...
Lease of 192.168.1.9 obtained, lease time 86400
route: SIOCDELRT: No such process
adding dns 192.168.1.1
Failed to open /dev/dbox/fp0
Scanning hardware info
Detected: hs7810a
ifconfig: SIOCGIFFLAGS: No such device
done.
[Harddisk] enumerating block devices...
new Harddisk sda -> /dev/sda -> /dev/sda
Reading satellites.xml
sec config cleared
setSlotInfo for dvb frontend 0 to slotid 0, descr STV090x Multistandard, need rotorworkaround No, enabled Yes, DVB-S2 Yes
slot: 0 configmode: simple
diseqcmode: single
sec config completed
[InfoBar] Failed to load resumepoints: [Errno 2] No such file or directory: '/etc/enigma2/resumepoints.pkl'
Renumbering...
8780kB available for acceleration surfaces.
resolution: 1280 x 720 x 32 (stride: 5120)
FATAL: failed: Operation not permitted
df: /tmp/autoYdTji7: No such file or directory
df: /tmp/autoyyrXt7: No such file or directory
Killed
e2 ended <- RTV: 137
*
ERROR
starting e2->
PYTHONPATH: /usr/lib/enigma2/python
+ (1) Background File Eraser
+ (5) Tuxtxt
+ (8) graphics acceleration manager
STMFB accel interface available
+ (9) GFBDC
20480k total video mem
12380k usable video mem
10760kB available for acceleration surfaces.
resolution: 720 x 576 x 32 (stride: 2880)
+ (9) gLCDDC
eDBoxLCD::eDBoxLCD >
Error loading config file!
LCD resolution: -1 x -1 x 1744829664 (stride: 1392509028)
+ (9) Font Render Class
+ (10) gRC
RC thread created successfully
+ (15) eWindowStyleManager
+ (20) DVB-CI UI
+ (20) RC Input layer
+ (20) misc options
+ (20) AVSwitch Driver
couldnt open /dev/dbox/fp0 to monitor vcr scart slow blanking changed!
+ (21) input device driver
Input device "HDMU RC FORTIS" is a remotecontrol
failed to open /dev/input/event1
Input device "HDMU RC FORTIS" is a remotecontrol
failed to open /dev/input/event2
Input device "HDMU RC FORTIS" is a remotecontrol
failed to open /dev/input/event3
Input device "HDMU RC FORTIS" is a mouse
Found 4 input devices.
+ (22) Hdmi CEC driver
+ (30) eActionMap
+ (35) CI Slots
scanning for common interfaces..
CI Slot 0: reset requested
CI Slot 1: reset requested
CI Slot 0 setSource(0)
CI Slot 1 setSource(0)
eDVBCIInterfaces->setInputSource(0, 0)
eDVBCIInterfaces->setInputSource(1, 1)
cannot open /proc/stb/tsmux/input2
cannot open /proc/stb/tsmux/input3
done, found 2 common interface slots
+ (35) CA handler
+ (40) eServiceCenter
settings instance.
+ (41) eServiceFactoryDVD
+ (41) eServiceFactoryEPlayer3
+ (41) eServiceFactoryHDMI
+ (41) eServiceFactoryM2TS
+ (41) eServiceFactoryMP3
+ (41) eServiceFactoryFS
+ (41) eServiceFactoryDVB
+ (41) Encoders
+ (41) Stream server
[SERVERSOCKET] ERROR on bind() (Address already in use)
reached rl 70
---- opening lame channel db
reading services (version 4)
loaded 242 channels/transponders and 6848 services
scanning for frontends..
opening frontend 0
frontend successfully opened
close frontend 0
found 1 adapter, 1 frontends(1 sim) and 2 demux, boxtype 31
RTC not ready... wait for transponder time
[EPGC] Initialized EPGCache (wait for setCacheFile call now)
[ePNG] couldn't open /usr/local/share/enigma2/skin_default/spinner/wait13.png
found 12 spinner!
executing main
setIoPrio best-effort level 3 ok
main thread is non-idle! display spinner!
Failed to open /dev/dbox/fp0
Scanning hardware info
Detected: hs7810a
[Harddisk] enumerating block devices...
new Harddisk sda -> /dev/sda -> /dev/sda
Reading satellites.xml
sec config cleared
setSlotInfo for dvb frontend 0 to slotid 0, descr STV090x Multistandard, need rotorworkaround No, enabled Yes, DVB-S2 Yes
slot: 0 configmode: simple
diseqcmode: single
sec config completed
[InfoBar] Failed to load resumepoints: [Errno 2] No such file or directory: '/etc/enigma2/resumepoints.pkl'
Renumbering...
8780kB available for acceleration surfaces.
resolution: 1280 x 720 x 32 (stride: 5120)
FATAL: failed: Operation not permitted
df: /tmp/autoYdTji7: No such file or directory
df: /tmp/autoyyrXt7: No such file or directory
Killed
e2 ended <- RTV: 137
*
ERROR
starting e2->
PYTHONPATH: /usr/lib/enigma2/python
+ (1) Background File Eraser
+ (5) Tuxtxt
+ (8) graphics acceleration manager
STMFB accel interface available
+ (9) GFBDC
20480k total video mem
12380k usable video mem
10760kB available for acceleration surfaces.
resolution: 720 x 576 x 32 (stride: 2880)
+ (9) gLCDDC
eDBoxLCD::eDBoxLCD >
Error loading config file!
LCD resolution: -1 x -1 x 1744829664 (stride: 1392509028)
+ (9) Font Render Class
+ (10) gRC
RC thread created successfully
+ (15) eWindowStyleManager
+ (20) DVB-CI UI
+ (20) RC Input layer
+ (20) misc options
+ (20) AVSwitch Driver
couldnt open /dev/dbox/fp0 to monitor vcr scart slow blanking changed!
+ (21) input device driver
Input device "HDMU RC FORTIS" is a remotecontrol
failed to open /dev/input/event1
Input device "HDMU RC FORTIS" is a remotecontrol
failed to open /dev/input/event2
Input device "HDMU RC FORTIS" is a remotecontrol
failed to open /dev/input/event3
Input device "HDMU RC FORTIS" is a mouse
Found 4 input devices.
+ (22) Hdmi CEC driver
+ (30) eActionMap
+ (35) CI Slots
scanning for common interfaces..
CI Slot 0: reset requested
CI Slot 1: reset requested
CI Slot 0 setSource(0)
CI Slot 1 setSource(0)
eDVBCIInterfaces->setInputSource(0, 0)
eDVBCIInterfaces->setInputSource(1, 1)
cannot open /proc/stb/tsmux/input2
cannot open /proc/stb/tsmux/input3
done, found 2 common interface slots
+ (35) CA handler
+ (40) eServiceCenter
settings instance.
+ (41) eServiceFactoryDVD
+ (41) eServiceFactoryEPlayer3
+ (41) eServiceFactoryHDMI
+ (41) eServiceFactoryM2TS
+ (41) eServiceFactoryMP3
+ (41) eServiceFactoryFS
+ (41) eServiceFactoryDVB
+ (41) Encoders
+ (41) Stream server
[SERVERSOCKET] ERROR on bind() (Address already in use)
reached rl 70
---- opening lame channel db
reading services (version 4)
loaded 242 channels/transponders and 6848 services
scanning for frontends..
opening frontend 0
frontend successfully opened
close frontend 0
found 1 adapter, 1 frontends(1 sim) and 2 demux, boxtype 31
RTC not ready... wait for transponder time
[EPGC] Initialized EPGCache (wait for setCacheFile call now)
[ePNG] couldn't open /usr/local/share/enigma2/skin_default/spinner/wait13.png
found 12 spinner!