Fernbedienung Problem HDMU_12780_E2_1008gse+_215_git_3150 in actus solo

[dacrack]

hallo,
benutze das http://HDMU_12780_E2_1008gse+_215_git_3150 image in meinem Opticum Actus Solo.
leider kann ich keine Fernbedienungs Settings einstellen. Box schmiert dabei ab.
wenn ich auf Menu --> Einstellungen --> System --> Fernbedienung-Einstellungen drücke, kommt ein Fehler. Weiss-Rotes Bild mit Restart...Screenshot kann auf Wunsch gemacht werden

------
Danke und Gruß

P.S. wie lauten die Login Daten?

[bonkel]

boardregeln beachten...
zugangsdaten stehen in der faq...warum liest die keiner???

[dacrack]

danke :)
hier ein screenshot vorab, bis ich mal weiss wie ich an die crashlogs komme8113


so, nun das letzte crashlog:

<?xml version="1.0" encoding="utf-8"?><HDMU>
<enigma2>
<crashdate>Sun Aug 31 20:04:57 2014</crashdate>
<compiledate>Aug 31 2014</compiledate>
<skin>skin.xml</skin>
<sourcedate>Aug 31 2014</sourcedate>
<rev>
<=!=[=C=D=A=T=A=[
-----====== HDMU 12780 enigma2 Git 3150 ======-----
]=]=>
</rev>
<freespace>
<=!=[=C=D=A=T=A=[
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/sda1 247919 94136 140983 40% /mnt
/dev/loop0 247919 94136 140983 40% /
tmpfs 58768 0 58768 0% /ram
/dev/loop0 247919 94136 140983 40% /dev.static
tmpfs 58768 0 58768 0% /dev
tmpfs 58768 0 58768 0% /dev/shm
tmpfs 58768 16 58752 0% /tmp
]=]=>
</freespace>
<freeram>
<=!=[=C=D=A=T=A=[
MemTotal: 117540 kB
MemFree: 3216 kB
Buffers: 2808 kB
Cached: 58828 kB
SwapCached: 0 kB
Active: 46880 kB
Inactive: 51784 kB
Active(anon): 23652 kB
Inactive(anon): 13392 kB
Active(file): 23228 kB
Inactive(file): 38392 kB
Unevictable: 0 kB
Mlocked: 0 kB
SwapTotal: 0 kB
SwapFree: 0 kB
Dirty: 0 kB
Writeback: 0 kB
AnonPages: 37056 kB
Mapped: 9912 kB
Shmem: 16 kB
Slab: 8824 kB
SReclaimable: 3512 kB
SUnreclaim: 5312 kB
KernelStack: 592 kB
PageTables: 276 kB
Quicklists: 128 kB
NFS_Unstable: 0 kB
Bounce: 0 kB
WritebackTmp: 0 kB
CommitLimit: 58768 kB
Committed_AS: 79128 kB
VmallocTotal: 507824 kB
VmallocUsed: 11236 kB
VmallocChunk: 473192 kB
]=]=>
</freeram>
<version>3.0.0</version>
</enigma2>
<image>
<stbmodel>1008gse+</stbmodel>
<kernelversion>
<=!=[=C=D=A=T=A=[
Linux 1008GSE+ 2.6.32.61_stm24_0215 #1 PREEMPT Sun Aug 31 12:14:55 CEST 2014 sh4 GNU/Linux
]=]=>
</kernelversion>
<kernelcmdline>console=ttyAS0,115200 root=/dev/root rw nwhwconf=$nwhwnet init=/bin/devinit coprocessor_mem=4m@0x40000000,4m@0x40400000</kernelcmdline>
<nimsockets>NIM Socket 0:</nimsockets>
<imageversion>
<=!=[=C=D=A=T=A=[
version=0350200905300000
]=]=>
</imageversion>
<imageissue>
<!-- No such file or directory -->
</imageissue>
</image>
<crashlogs>
<enigma2crashlog>
<=!=[=C=D=A=T=A=[
+ (1) Background File Eraser
+ (5) Tuxtxt
+ (8) graphics acceleration manager
STMFB accel interface available


+ (9) GFBDC
20480k total video mem
12380k usable video mem
10760kB available for acceleration surfaces.
resolution: 720 x 576 x 32 (stride: 2880)
+ (9) gLCDDC
eDBoxLCD::eDBoxLCD >
Error loading config file!


LCD resolution: -1 x -1 x 1744829664 (stride: 1392509028)
+ (9) Font Render Class
+ (10) gRC
RC thread created successfully
+ (15) eWindowStyleManager
+ (20) DVB-CI UI
+ (20) RC Input layer
+ (20) misc options
+ (20) AVSwitch Driver
couldnt open /dev/dbox/fp0 to monitor vcr scart slow blanking changed!
+ (21) input device driver
Input device "HDMU RC FORTIS" is a remotecontrol
failed to open /dev/input/event1
Input device "HDMU RC FORTIS" is a remotecontrol
failed to open /dev/input/event2
Input device "HDMU RC FORTIS" is a remotecontrol
failed to open /dev/input/event3
Input device "HDMU RC FORTIS" is a mouse
Found 4 input devices.
+ (22) Hdmi CEC driver
+ (30) eActionMap
+ (35) CI Slots
scanning for common interfaces..
CI Slot 0: reset requested
CI Slot 1: reset requested
CI Slot 0 setSource(0)
CI Slot 1 setSource(0)
eDVBCIInterfaces->setInputSource(0, 0)
eDVBCIInterfaces->setInputSource(1, 1)
cannot open /proc/stb/tsmux/input2
cannot open /proc/stb/tsmux/input3
done, found 2 common interface slots
+ (35) CA handler
+ (40) eServiceCenter
settings instance.
+ (41) eServiceFactoryDVD
+ (41) eServiceFactoryEPlayer3
+ (41) eServiceFactoryHDMI
+ (41) eServiceFactoryM2TS
+ (41) eServiceFactoryMP3
+ (41) eServiceFactoryFS
+ (41) eServiceFactoryDVB
+ (41) Encoders
+ (41) Stream server
[SERVERSOCKET] ERROR on bind() (Address already in use)
reached rl 70
---- opening lame channel db
reading services (version 4)
loaded 235 channels/transponders and 6097 services
scanning for frontends..
opening frontend 0
close frontend 0
boxtype detection via /proc/stb/info not possible... use fallback via demux count!


found 1 adapter, 1 frontends(1 sim) and 2 demux, boxtype 0
Use valid Linux Time :) (RTC?)
[EPGC] Initialized EPGCache (wait for setCacheFile call now)
[ePNG] couldn't open /usr/local/share/enigma2/skin_default/spinner/wait13.png
found 12 spinner!


setIoPrio best-effort level 3 ok
Failed to open /dev/dbox/fp0
Scanning hardware info
Detected: hs7810a
[Harddisk] enumerating block devices...
new Harddisk sda -> /dev/sda -> /dev/sda
main thread is non-idle! display spinner!
Reading satellites.xml
sec config cleared
setSlotInfo for dvb frontend 0 to slotid 0, descr STV090x Multistandard, need rotorworkaround No, enabled Yes, DVB-S2 Yes
slot: 0 configmode: simple
diseqcmode: single
sec config completed
Renumbering...
8780kB available for acceleration surfaces.
resolution: 1280 x 720 x 32 (stride: 5120)
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/event2' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 22] Invalid argument >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropriate ioctl for device >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse0' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js0' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js3' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse1' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js2' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse2' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse3' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/event3' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/event1' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js1' >
Selected keymap does not exist!
Activating language Deutsch
[ePopen] command: ip -o addr show dev eth0
eDBoxLCD::getInstance
LINE # automatically generated by enigma 2
LINE
[AutoMount.py] self.automounts without mounts {}
[NetworkBrowser] fallback to default translation for NetworkBrowser
[NetworkBrowser] fallback to default translation for Search for network shares
[NetworkBrowser] fallback to default translation for MountManager
[NetworkBrowser] fallback to default translation for Manage network shares
getModeList for port Component
getModeList for port Scart
getModeList for port HDMI
getModeList for port HDMI-PC
hotplug on dvi
setMode - port: HDMI mode: 1080p rate: 60Hz
updateColor: HDMI
[eSocketMMIHandler] created successfully
Plugin Extensions/WebInterface failed to load: No module named plugin
adding Resource DiseqcTester
resources: {'DiseqcTester': <function DiseqcTesterMain at 0x171cfb4>}
starting hotplug handler
[EPGC] setCacheFile read/write epg data from/to '/hdd/epg.dat'
[EPGC] time updated.. start EPG Mainloop
[SKIN] Parsing embedded skin <embedded-in-'Screensaver'>
[ePNG] couldn't open /usr/local/share/enigma2/HDMUSkin/extensions/hdmu_logo.png
[Skin] Error: {skin.xml}: pixmap file /usr/local/share/enigma2/HDMUSkin/extensions/hdmu_logo.png not found!. Please contact the skin's author!
ORDER BY .. string invalid.
compile query failed
ORDER BY .. string invalid.
compile query failed
warning, skin is missing element boquet in <class 'Screens.ChannelSelection.ChannelSelection'>
[EPGC] 25911 events read from /hdd/epg.dat
[SKIN] No skin to read...
warning, skin is missing element From in <class 'Screens.Dish.Dish'>
warning, skin is missing element Goto in <class 'Screens.Dish.Dish'>
warning, skin is missing element tunerName in <class 'Screens.Dish.Dish'>
warning, skin is missing element turnSpeed in <class 'Screens.Dish.Dish'>
warning, skin is missing element posGoto in <class 'Screens.Dish.Dish'>
warning, skin is missing element posFrom in <class 'Screens.Dish.Dish'>
warning, skin is missing element turnTime in <class 'Screens.Dish.Dish'>
RemovePopup, id = ZapError
setValue 100
Setvolume: 100 100 (raw)
Setvolume: 0 0 (-1db)
playing 1:0:1:6D67:437:1:C00000:0:0:0:
[__evStart]
[__evSeekableStatusChanged]
not enough diskspace for timeshift! (less than 200MB)
not pauseable.
not enough diskspace for timeshift! (less than 200MB)
not pauseable.
not enough diskspace for timeshift! (less than 200MB)
not pauseable.
not enough diskspace for timeshift! (less than 200MB)
RemovePopup, id = ZapError
allocate channel.. 0437:0001
opening frontend 0
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 0 Freq 11953500 Pol 0 SR 27500000 INV 2 FEC 3 orbpos 192 system 0 modulation 1 pilot 2, rolloff 0
tuning to 1353 mhz
OURSTATE: tuning
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:1:6D67:437:1:C00000:0:0:0:
allocate demux
[ePopen] command: route -n | grep eth0
poll: unhandled POLLERR/HUP/NVAL for fd 30(16)
[SEC] invalidate current switch params
[SEC] setVoltage 2
[SEC] sleep 10ms
[SEC] setTone 1
[SEC] sleep 10ms
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
[SEC] sleep 500ms
192.168
0.0.0.0
nameservers: [[192, 168, 178, 1]]
read configured interface: {'lo': {'dhcp': False}, 'wlan0': {'dhcp': True}, 'eth0': {'dhcp': True}}
self.ifaces after loading: {'eth0': {'preup': False, 'predown': False, 'ip': [192, 168, 178, 41], 'up': True, 'mac': '8e:c4:ff:2c:40:72', 'dhcp': True, 'bcast': [192, 168, 178, 255], 'netmask': [255, 255, 255, 0], 'gateway': [192, 168, 178, 1]}}
AT plugin not found
ER plugin not found
[OpenWebif] no plugins to load
[OpenWebif] started on 80
[OpenWebif] started on 443
poll: unhandled POLLERR/HUP/NVAL for fd 33(16)
(0)fe event: status 1f, inversion off, m_tuning 2
OURSTATE: ok
[eDVBLocalTimerHandler] channel 0x1d4e700 running
[eEPGCache] channel 0x1d4e700 running
[EPGC] next update in 2 sec
stop release channel timer
eventNewProgramInfo 0 0
have 1 video stream(s) (00d2), and 1 audio stream(s) (00e1), and the pcr pid is 00d2, and the text pid is 00e6
allocate demux
decoder state: play, vpid=210, apid=225
DMX_SET_PES_FILTER(0xd2) - pcr - ok
DMX_SET_PES_FILTER(0xe1) - audio - ok
AUDIO_SET_BYPASS(0) - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 0 - ok
DMX_SET_PES_FILTER(0xd2) - video - ok
VIDEO_PLAY - ok
DMX_SET_PES_FILTER(0xe6) - ttx - ok
VIDEO_CONTINUE - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
AUDIO_CONTINUE - ok
AUDIO_CHANNEL_SELECT(0) - ok
disable teletext subtitles page ffffffffffffffff (und)
[__evUpdatedInfo]
[writeChannelName]
vfd display text: 3sat
[showCrypted]
[showDolby]
[showMp3]
[eDVBCAService] new service 1:0:1:6D67:437:1:C00000:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:1:6D67:437:1:C00000:0:0:0:
[__evUpdatedEventInfo]
[__evUpdatedEventInfo]
[NetworkBrowser] fallback to default translation for NetworkBrowser
[NetworkBrowser] fallback to default translation for Search for network shares
[__evUpdatedEventInfo]
[NetworkBrowser] fallback to default translation for MountManager
[NetworkBrowser] fallback to default translation for Manage network shares
RemovePopup, id = ZapError
VIDEO_GET_EVENT - ok
unhandled DVBAPI Video Event 9
use pmtpid 00c8 for service_id 6d67
eventNewProgramInfo 0 0
have 1 video stream(s) (00d2), and 4 audio stream(s) (00dc, 00dd, 00de, 00e1), and the pcr pid is 00d2, and the text pid is 00e6
decoder state: play, vpid=210, apid=225
[__evUpdatedInfo]
[writeChannelName]
vfd display text: 3sat
[showCrypted]
[showDolby]
[showMp3]
VIDEO_GET_EVENT - ok
unhandled DVBAPI Video Event 5
VIDEO_GET_EVENT - ok
[__evVideoSizeChanged]
VIDEO_GET_EVENT - ok
sdt update done!
[Dish] tuning failed
Plugin Extensions/WebInterface failed to load: No module named plugin
AT plugin not found
ER plugin not found
[OpenWebif] no plugins to load
[OpenWebif] failed to listen on Port 80
[__evUpdatedEventInfo]
[OpenWebif] failed to listen on Port 443
[EPGC] start caching events(1409506766)
[eDVBLocalTimerHandler] diff is 3
[eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
[eDVBLocalTimerHandler] update RTC
[eDVBLocalTimerHandler] time update to 19:39:35
[eDVBLocalTimerHandler] m_time_difference is 3
[eDVBLocalTimerHandler] set Linux Time
[EPGC] nownext finished(1409506776)
[EPGC] schedule finished(1409506796)
[EPGC] stop caching events(1409506796)
[EPGC] next update in 60 min
not enough diskspace for timeshift! (less than 200MB)
[Skin] SKIN ERROR in screen 'About' widget 'widget': {skin.xml}: source 'Tuner1' was not found in screen 'About'!. Please contact the skin's author!
[Skin] SKIN ERROR in screen 'About' widget 'widget': {skin.xml}: source 'Tuner2' was not found in screen 'About'!. Please contact the skin's author!
[Skin] SKIN ERROR in screen 'About' widget 'widget': {skin.xml}: source 'Tuner3' was not found in screen 'About'!. Please contact the skin's author!
warning, skin is missing element AboutScrollLabel in <class 'Screens.About.About'>
b: 3sat
b: ZDFvision
b: 16:9
b: 720x57625
b: MPEG2
b: 12582912
b: 1:0:1:6D67:437:1:C00000:0:0:0:
[__evUpdatedEventInfo]
[NetworkBrowser] fallback to default translation for MountManager
[NetworkBrowser] fallback to default translation for Manage your network shares...
[NetworkBrowser] fallback to default translation for NetworkBrowser
[NetworkBrowser] fallback to default translation for Search for network shares...
[NetworkBrowser] fallback to default translation for MountManager
[NetworkBrowser] fallback to default translation for Manage your network shares...
[NetworkBrowser] fallback to default translation for NetworkBrowser
[NetworkBrowser] fallback to default translation for Search for network shares...
[ePopen] command: ethtool eth0
[ePopen] command: ping -c 1 www.openpli.org
[ePopen] command: ping -c 1 www.google.nl
[ePopen] command: ping -c 1 www.google.com
poll: unhandled POLLERR/HUP/NVAL for fd 61(16)
poll: unhandled POLLERR/HUP/NVAL for fd 65(16)
poll: unhandled POLLERR/HUP/NVAL for fd 68(16)
poll: unhandled POLLERR/HUP/NVAL for fd 61(16)
[iStatus] killing self.WlanConsole
warning, skin is missing element InfoTextBorder in <class 'Screens.NetworkSetup.NetworkAdapterTest'>
setForegroundColorNum(1) failed! defined colors: []
setForegroundColorNum(1) failed! defined colors: []
[ePopen] command: ethtool eth0
poll: unhandled POLLERR/HUP/NVAL for fd 61(16)
setForegroundColorNum(1) failed! defined colors: []
setForegroundColorNum(1) failed! defined colors: []
[ePopen] command: ping -c 1 www.openpli.org
[ePopen] command: ping -c 1 www.google.nl
[ePopen] command: ping -c 1 www.google.com
poll: unhandled POLLERR/HUP/NVAL for fd 65(16)
poll: unhandled POLLERR/HUP/NVAL for fd 68(16)
poll: unhandled POLLERR/HUP/NVAL for fd 61(16)
setForegroundColorNum(1) failed! defined colors: []
[ePopen] command: nslookup www.dream-multimedia-tv.de
[ePopen] command: nslookup www.heise.de
[ePopen] command: nslookup www.google.de
poll: unhandled POLLERR/HUP/NVAL for fd 65(16)
poll: unhandled POLLERR/HUP/NVAL for fd 61(16)
poll: unhandled POLLERR/HUP/NVAL for fd 68(16)
[__evUpdatedEventInfo]
[__evUpdatedInfo]
[writeChannelName]
vfd display text: 3sat
[showCrypted]
[showDolby]
[showMp3]
Screen <class 'Screens.Setup.Setup'>(('remotecontrolsetup',), {}): <type 'exceptions.KeyError'>
Traceback (most recent call last):
File "/usr/lib/enigma2/python/mytest.py", line 226, in create
return screen(self, *arguments, **kwargs)
File "usr/lib/enigma2/python/Screens/Setup.py", line 90, in __init__
File "usr/lib/enigma2/python/Screens/Setup.py", line 79, in refill
File "usr/lib/enigma2/python/Screens/Setup.py", line 132, in addItems
File "<string>", line 1, in <module>
File "usr/lib/enigma2/python/Components/config.py", line 1577, in __getattr__
KeyError: 'oldstyle_zap_controls'
Traceback (most recent call last):
File "usr/lib/enigma2/python/Components/ActionMap.py", line 66, in action
File "usr/lib/enigma2/python/Components/ActionMap.py", line 46, in action
File "usr/lib/enigma2/python/Screens/Menu.py", line 59, in okbuttonClick
File "usr/lib/enigma2/python/Tools/BoundFunction.py", line 9, in __call__
File "usr/lib/enigma2/python/Screens/Menu.py", line 83, in openSetup
File "/usr/lib/enigma2/python/mytest.py", line 295, in openWithCallback
dlg.callback = callback
AttributeError: 'NoneType' object has no attribute 'callback'
(PyObject_CallObject(<bound method NumberActionMap.action of <Components.ActionMap.NumberActionMap instance at 0x2d437f2c>>,('OkCancelActions', 'ok')) failed)
getResolvedKey config.plugins.crashlogautosubmit.sendAnonCrashlog failed !! (Typo??)
getResolvedKey config.plugins.crashlogautosubmit.addNetwork failed !! (Typo??)
getResolvedKey config.plugins.crashlogautosubmit.addWlan failed !! (Typo??)
]=]=>
</enigma2crashlog>
</crashlogs>
</HDMU>



cheers

[ForkBomb1983]

Falls es dir hilft, ansonsten da es nicht deiner Frage entspricht, ignorier den Beitrag einfach.

Das Problem mit dem Abschmieren hatte ich auch, nimm die "HDMU_12763 git_3131 (http://images.hdmedia-universe.com/spark/HDMU_12763_E2_spark_215_git_3131_nodebug_mix_USB.t ar.gz)", die Version läuft bei mir recht sauber, 12768 war schon instabil lief aber irgend wie, also mehr schlecht als recht und die 12780 also die Aktuelle, zeigte bei mir die selben Symptome wie bei dir, wenn ich umschalten wollte ist die Box abgeschmiert und im Menü hat sie sich aufgehängt oder ist auch abgeschmiert.

[dacrack]

Super.
Nun funzt alles so wie es soll :)
Keine weiteren Beanstandungen mehr!
Super Image :D

Danke

Cheers