Archiv verlassen und diese Seite im Standarddesign anzeigen : [spark] Hdmu_12791_e2
Gerade Installiert mit Settingsübernahme...Perfekt!!! es läuft alles im vollsten zufriedenheit! :D
Gruß
Hallo,
I flashed HDMU_12791 but was unable to bring my card to live with oscam9616libusb. The card is ICE type (emulated cryptoworks and irdeto, similar to ORF ICE card). I tried everything, different Mhz (default 357 Mhz as well), checked configs, rstarted oscam and rebooted E2 several times but still the same: error initializing card. I reflashed the image again with MAT, just clear image and just copied my configs and reboot E2 but error initialzing card appeared again.
So, I finally came back to HDMU_12736 and I used the same oscam9616libusb and the same configs and card is running normally. Does anybody know what went wrong?
HDMU_1736
before we start - is there one digit missing? ;)
Yes, I already corrected it..
that's what I thought - thx :)
OK - anything in the oscam log?
if not: stop oscam via OSD,
connect via telnet and start oscam manually (WITHOUT the switch for running in background/as daemon) and see what's happening,
oscam produces a lot of interesting debug infos visible via console...
OK, pls tell me telnet command to start the oscam.
first do:
cat /etc/.emustart
there you find the script for your oscam starting cmd
then use this output (e.g. /path/to/oscamxxx) and have a look at the output by performing:
cat /path/to/oscamxxx
there you find the command to execute your oscam with your settings path, ...
start it manually in the console (without -d) - does it work? otherwise just paste the output of the last cat command
Powered by vBulletin® Version 4.2.5 Copyright ©2024 Adduco Digital e.K. und vBulletin Solutions, Inc. Alle Rechte vorbehalten.