Wer hat ne AT7500?

[morly]

Hi Leute,
wer hat ne AT7500 mit aktuellem HDMU Image?

Bitte postet mir folgende Telnet-Ausgabe:

cat /proc/mtd

Thx

[Surfacedj]

-----====== HDMU 12949 enigma2 Git 3258 ======-----




BusyBox v1.22.1 (2014-10-09 01:54:49 CEST) built-in shell (ash)
Enter 'help' for a list of built-in commands.

AT7500:~# cat /proc/mtd
dev: size erasesize name
mtd0: 00060000 00020000 "Boot_firmware"
mtd1: 00320000 00020000 "Kernel"
mtd2: 0001fffe 00020000 "Fake_ROOT"
mtd3: 0001fffe 00020000 "Fake_DEV"
mtd4: 0001fffe 00020000 "Fake_APP"
mtd5: 03c00000 00020000 "Real_ROOT"

[morly]

genau das brauchte ich - thx!!
gibt bei der AT7500 Unterschiede - die muss ich abfragen...

[ciccio81]

wenn das relevant is hab eine at 7600 mit titan und da sieht die ausgabe so aus

TitanNit-atemio7600:~# cat /proc/mtd
dev: size erasesize name
mtd0: 00060000 00020000 "Boot firmware"
mtd1: 002a0000 00020000 "Kernel"
mtd2: 00e20000 00020000 "Root"
mtd3: 00600000 00020000 "Var"
mtd4: 028e0000 00020000 "Swap"
mtd5: 03fa0000 00020000 "Full"
TitanNit-atemio7600:~#

[morly]

das MAT unterstützt (noch) keine AT7600

[bonkel]

at7600 is genau das selbe wie at7500 :D

[morly]

glaub aber nicht, dass das AT die Box erkennt - aber kannste ja mal testen

[ciccio81]

wenn ich mich mit mat verbinde kommt diese meldulng

Box Supporter loaded with version: 0.1.6
Profile changed to: default
### START PHASE: STARTING STB ADMIN TOOL Windows 2.2.2 ###
Morly's STB Admin Tool successfully started
### COMPLETED PHASE: STARTING STB ADMIN TOOL Windows 2.2.2 ###
Box Supporter: no new version on server - continue...
Connecting to IP: 192.168.2.116 with username: root and password: HDMU
Connecting to box via telnet...OK
Telnet prompt received: TitanNit-atemio7600:~#
Query CPU type...
Received CPU type: SH4
Query box type...
Change USB/MB tab to default
Boxtype received: atevio7500
No Mounted Movie HDD found
Flash image bootet from: /dev/mtdblock2
Start tool at location: /tmp
FW tools transfered...OK
All needed commands found on box
### COMPLETED PHASE: CONNECTING AND INITIALIZING STB ###
### START PHASE: INITIALIZING AND STARTING TABS ###
Box successfully initialized, now initializing and starting tools in tabs
Tab 1/10: Welcome successfully initialized
Disk Manager changed to: sfdisk
Loading plugin information...
Loading rules from file...
Loaded backup rule: Channel_List
Rule changed to: Channel_List
Loaded edit rule: CustomEpg
Loaded backup rule: Network_Interfaces
Loaded edit rule: Skin_NextEvents_Drei
Loaded backup rule: SoftCam
Flash tool received new rules list
Part tool received new rules list
5 backup rule(s) loaded successfully
Destination changed to: Archive...
Tab 2/10: Cont-Man successfully initialized
Tab 3/10: Logging successfully initialized
Tab 4/10: Settings successfully initialized
Tab 5/10: Telnet successfully initialized
Disk Manager: Disk information loaded successfully
Tab 6/10: Disks/MB successfully initialized
Tab 7/10: Plugins successfully initialized
Flash tool received new plugin list
Part tool received new plugin list
Tab 8/10: Box Status successfully initialized
Tab 9/10: Flash successfully initialized
Flashing not supported for your box - Flashtool deactivated
Requesting bootargs via LAN...
Tab 10/10: Bootargs successfully initialized
### COMPLETED PHASE: INITIALIZING AND STARTING TABS - THE TOOL IS NOW READY TO BE USED!! ###

[morly]

oh - geht doch ;) thx

werden bootargs ausgelesen?

[ciccio81]

ja



#Bootargs Morly's SH4 STB Admin Tool from: So Okt 12 2014
bootdelay=0
baudrate=115200
menutimeout=1500
hwnfconf=setenv nwhwnet device:eth0,hwaddr:$ethaddr
ipconf=setenv ipaddrcfg ip=$ipaddr:$serverip:$gateway:$netmask:sdk:eth0:of f
cramfsbootargs=run hwnfconf;run ipconf;setenv bootargs console=ttyAS0,115200 root=/dev/mtdblock3 rootfstype=squashfs $ipaddrcfg nwhwconf=$nwhwnet bigphysarea=5000 stb7105:eth0:off stmmaceth=msglvl:0,watchdog:4000,rxsize:16 $MTD loglevel=0
bootdesc_0=---FLASH---
bootcmd=bootmenu $menutimeout $default
stdin=serial
stdout=serial
stderr=serial
ethaddr=00:11:22:33:00:26
MTD=mtdparts=physmap-flash:384K(Boot_firmware),2688k@0x60000(kernel),0K @0x1120000(App),14464k@0x300000(ROOT_FS),0K@0x1120 000(Device),1M@0x2100000(CONFIG),30M@0x02200000(Us er),64M@0(All),0K@0x1120000(APP_ORG),0K@0x1120000( APP_BAK)
bootcmd_0=run bootargs_0; bootm a0060000
bootargs_0=run hwnfconf;run ipconf;setenv bootargs console=ttyAS0,115200 root=/dev/mtdblock3 rootfstype=squashfs $ipaddrcfg nwhwconf=$nwhwnet bigphysarea=5000 stb7105:eth0:off stmmaceth=msglvl:0,watchdog:4000,rxsize:16 $MTD loglevel=8

[morly]

so soll sein - super :)

[souhai]

How erect Bootargs

[morly]

what exactly are you planning to do? don't understand your question...

[Audioniek]

AT7500 und AM7600 unterschiede:

hardware keine
bootloader unterschiedlich
AT7600 ist serienmaessig mit Titan geflasht und deswegen ist ne modifizierte bootloader drin der andere mtd's definiert hat.

Gruesse,

Audioniek.