PDA

Archiv verlassen und diese Seite im Standarddesign anzeigen : MAT 2.2.3 und AZBoxPremiunHD mit MacOSX



macmanolo
27.10.2014, 22:21
morly, die neuer Mac version 2.2.3 geht nicht mit unsuported boxen, es bleiben alle optionen grau wie bei der 2.2.2 version, lege foto bei.

Box Supporter loaded with version: 0.1.7
Profile changed to: AzBoxHD
### START PHASE: STARTING STB ADMIN TOOL Mac 2.2.3 ###
Morly's STB Admin Tool successfully started
### COMPLETED PHASE: STARTING STB ADMIN TOOL Mac 2.2.3 ###
Could net read version of library - aborting update process...
Connecting to IP: 192.168.0.130 with username: root and password: HDMU
Connecting to box via telnet...OK
Telnet prompt received: root@azboxhd:~#
Query CPU type...
Received CPU type: MIPS
Query box type...
Unknown box type: premium
Unsupported box type - starting MAT with limited support
Mounted Movie HDD found at: /media/hdd
Start tool at location: /media/hdd
BOOTET HDMU IMAGE FOUND


mfg

lucsch
28.10.2014, 10:39
Morly, Macmanolo,
The Tools directory is missing in the new MAT. Is that intentional ?

morly
28.10.2014, 12:47
Morly, Macmanolo,
The Tools directory is missing in the new MAT. Is that intentional ?

Please take the one from version 2.2.2 (just didn't want to upload the whole bunch again...)

macmanolo
28.10.2014, 13:06
Geht auch nicht, selber fehler und auserden bekomme ich eine warnung von Avast, ist aber bestim von board forum den ich bekome die glaiche warnung bein board besuch.

Apropo,die neuer version 2.2.3 mit Windows xp fiunkzioniert korrekt mit den AZBoxPremiunHD aber nicht mit der Mac version.

mfg

lucsch
28.10.2014, 13:09
Oke, thanks

morly
28.10.2014, 13:45
Deaktiviere mal in den MAT Settings den Web Browser - dann Fehlermeldung weg?

macmanolo
28.10.2014, 13:58
Ne, bleib die selber meldung.

Box Supporter loaded with version: 0.1.7
Profile changed to: default
### START PHASE: STARTING STB ADMIN TOOL Mac 2.2.3 ###
Morly's STB Admin Tool successfully started
### COMPLETED PHASE: STARTING STB ADMIN TOOL Mac 2.2.3 ###
Could net read version of library - aborting update process...
Connecting to IP: 192.168.0.130 with username: root and password: HDMU
Connecting to box via telnet...OK
Telnet prompt received: root@azboxhd:~#
Query CPU type...
Received CPU type: MIPS
Query box type...
Unknown box type: premium
Unsupported box type - starting MAT with limited support
Mounted Movie HDD found at: /media/hdd
Start tool at location: /media/hdd
BOOTET HDMU IMAGE FOUND

morly
28.10.2014, 16:29
Stoppt den Ablauf bei: "BOOTET HDMU IMAGE FOUND"
Sollte da aber weitergehen...
Und das ist nur bei der Mac-Version, oder?

macmanolo
28.10.2014, 16:41
Ja, genau so ist es, bei WindowsXP get ja weiter.


Box Supporter loaded with version: 0.1.7
Profile changed to: AZBoxHDcochera
### START PHASE: STARTING STB ADMIN TOOL Windows 2.2.3 ###
Morly's STB Admin Tool successfully started
### COMPLETED PHASE: STARTING STB ADMIN TOOL Windows 2.2.3 ###
Box Supporter: no new version on server - continue...
Connecting to IP: 192.168.0.130 with username: root and password: HDMU
Connecting to box via telnet...OK
Telnet prompt received: root@azboxhd:~#
Query CPU type...
Received CPU type: MIPS
Query box type...
Unknown box type: premium
Unsupported box type - starting MAT with limited support
Mounted Movie HDD found at: /media/hdd
Start tool at location: /media/hdd
BOOTET HDMU IMAGE FOUND
FW tools transfered...OK
All needed commands found on box
### COMPLETED PHASE: CONNECTING AND INITIALIZING STB ###
Box not booted from flash: flash tab deactivated
Bootargs only supported for SH4 boxes: bootargs tab deactivated
### START PHASE: INITIALIZING AND STARTING TABS ###
Box successfully initialized, now initializing and starting tools in tabs
Tab 1/8: Welcome successfully initialized
Disk Manager changed to: sfdisk
Loading plugin information...
Loading rules from file...
Loaded backup rule: Channel_List
Rule changed to: Channel_List
Loaded edit rule: CustomEpg
Loaded backup rule: Navibar_ICONS
Loaded backup rule: Network_Interfaces
Loaded edit rule: Skin_NextEvents_Drei
Loaded backup rule: SoftCam
Flash tool received new rules list
Part tool received new rules list
6 backup rule(s) loaded successfully
Destination changed to: Archive...
Tab 2/8: Cont-Man successfully initialized
Tab 3/8: Logging successfully initialized
Tab 4/8: Settings successfully initialized
Tab 5/8: Telnet successfully initialized
Tab 6/8: Disks/MB successfully initialized
Tab 7/8: Box Status successfully initialized


mfg

morly
28.10.2014, 16:43
Hast bei der mac-Version eh den Tools-Unterordner?
Er stoppt nämlich beim Schritt das Tools-Archiv auf die Box zu übertragen.
Bei der 2.2.3 ist der Ornder nicht vorhanden - bitte von der 2.2.2 rüberkopieren

macmanolo
28.10.2014, 16:51
Habe ich ja gemacht, mit der Triplex funkzioniert ja.

Box Supporter loaded with version: 0.1.7
Profile changed to: AzBoxHD
### START PHASE: STARTING STB ADMIN TOOL Mac 2.2.3 ###
Morly's STB Admin Tool successfully started
### COMPLETED PHASE: STARTING STB ADMIN TOOL Mac 2.2.3 ###
Could net read version of library - aborting update process...
Profile changed to: Triplex
Connecting to IP: 192.168.1.110 with username: root and password: HDMU
Connecting to box via telnet...OK
Telnet prompt received: SPARK7162:~#
Query CPU type...
Received CPU type: SH4
Query box type...
Change USB/MB tab to SPARK-mod
Boxtype received: spark7162
Mounted Movie HDD found at: /media/hdd
Flash image bootet from: /dev/mtdblock6
Start tool at location: /media/hdd
BOOTET HDMU IMAGE FOUND
FW tools transfered...OK
All needed commands found on box
### COMPLETED PHASE: CONNECTING AND INITIALIZING STB ###
### START PHASE: INITIALIZING AND STARTING TABS ###
Box successfully initialized, now initializing and starting tools in tabs
Tab 1/9: Welcome successfully initialized
Disk Manager changed to: sfdisk
Loading plugin information...
Loading rules from file...
Loaded backup rule: BootVideo
Loaded backup rule: Channel_List
Loaded backup rule: picon
Loaded backup rule: Picon_internos
Loaded edit rule: Skin_NextEvents_Drei
Loaded backup rule: TVweb_14
Flash tool received new rules list
Part tool received new rules list
21 backup rule(s) loaded successfully
Destination changed to: Archive...
Tab 2/9: Cont-Man successfully initialized
Tab 3/9: Logging successfully initialized
Tab 4/9: Settings successfully initialized
Tab 5/9: Flash successfully initialized
Tab 6/9: Telnet successfully initialized
Tab 7/9: Disks/MB successfully initialized
Tab 8/9: Box Status successfully initialized
Tab 9/9: Plugins successfully initialized
### COMPLETED PHASE: INITIALIZING AND STARTING TABS - THE TOOL IS NOW READY TO BE USED!! ###
Flash tool received new plugin list
Part tool received new plugin list


mfg

morly
28.10.2014, 17:39
OK - muss ich mir auf der Mac Maschine ansehen - melde mich wieder :)

macmanolo
19.11.2014, 17:03
Hi morly, hast du schon zeit gehab am Mac zur probieren?

mfg

morly
19.11.2014, 17:14
nö - war jetzt länger nicht da (jaja, immer die realen Jobs...) ;)
aber Danke für die Erinnerung, hätte ich fast vergessen - schaus mir die Tage an

intik
19.11.2014, 19:15
Sorry.sorry

morly
19.11.2014, 19:23
Befehle? Meinst das?:
http://www.hdmedia-universe.com/board/showthread.php?6804-MAT-Boxtyp-anfragen

macmanolo
05.12.2014, 21:36
Hi morly, hast du schon zeit gehab am Mac zur probieren?

mfg
nö - war jetzt länger nicht da (jaja, immer die realen Jobs...) ;)
aber Danke für die Erinnerung, hätte ich fast vergessen - schaus mir die Tage an
morly schon mal zeit gehab, oder kom was neues...

mfg

morly
06.12.2014, 11:34
... ich arbeite an der 2.3 - darum habe ich hier noch nicht nachgesehen - sorry.
Aber ich arbeite auch diesen Thread ab - hab ja noch einen Mac-Bug zu beheben...

morly
23.12.2014, 12:31
GEFIXT!!
- hab jetzt einen Leih-Mac :D -

(dieser Fehler war übrigens nicht Mac-spezifisch)

macmanolo
23.12.2014, 16:52
GEFIXT!!
- hab jetzt einen Leih-Mac :D -

(dieser Fehler war übrigens nicht Mac-spezifisch)

Ich nehme an, das wird in einer zukunftige neuer Version zur Vefügung stehen und nicht für die aktuelle.

mfg

morly
23.12.2014, 17:21
Ja genau... v2.3... hab ja Urlaub ;)

macmanolo
23.02.2015, 15:01
hi Morly, habe gesehen das mit der version 2.2.3 habe einblick auf die DOM partition und könte sogar einen backup auf tar.gz daraus machen, die frage ist Könte man (wen es nicht andres geht hilf auch per telnet) anstat tar.gz einen cramfs datei namens "image2" aus dieser partition machen?

mfg

morly
23.02.2015, 15:42
gäb übrigens bereits die 2.3 für Mac ;)
hab jetzt eine azbox, sobald der Channellist Editor fertig ist schau ich mir diese Box an.
jetzt war mal 4 Wochen Stillstand (Grippe+Urlaub+erneut Grippe)

macmanolo
23.02.2015, 15:59
gäb übrigens bereits die 2.3 für Mac ;)

Ja , weis ich, habe die version 2.3.1 deswegen bin ich auf die idee gekommen, weil ich gesehen habe das man auf die dateien der dom partition heran komen kan.

Es geht un folgendes:

Here is Extract tool with which You can unpack patch.e2 ( RTi core Enigma 2 is in patch.e2 format ).

With this tool You will get kernel and image2 ( this is cramfs with e2 files )

Then copy image2 to Your linux machine like in /root/ , and You will have /root/image2

mkdir /root/realise

mkdir /Patch

mount -t cramfs /root/image2 /Patch -o loop

cd /Patch

tar -cf - . | tar -C /root/realise/ -xpf -

now you have extracted RTi Core image in : /root/realise/

now you can make changes

and when all is ok , send command:

mkcramfs /root/realise/MMP /root/my_image_2

copy my_image_2 on win pc , start AZ_E2_Packer, load my_image_2, load kernel file (if you want) thats all

Then use AzBox E2 Packer to pack it to patch.e2 format

Details:

-ID TEam - 10 bytes ( example: like RTi Team, SIF Team, or PB Team )
-ID Enigma - 20 bytes ( example: next 20 bytes are ID Enigma, like BlackHole Enigma usb dvb-t etc. etc )
-Version - 10 bytes ( example: this describe version like RC5 )
-About Enigma - 12 bytes ( example: This is PB Enigma )
-size of cramfs - 4 bytes
-cramfs - content of e2 files
-Kernel Description - 12 bytes
-size of kernel - 4 bytes
-kernel

This is content of patch.e2 when it is opened with any Editor.
Wie man sehen kann wen mann der patch.e2 ausernander/uncomprimier macht kommen zwei dateien heraus image2 und der kernel, die idee ist wen das image fertig konfiguriert ist einen backup zur machen und dan mit der dazu gehörigen kernel von original image wieder einen patch.e2 zur erzeugen damit man in wieder mit azup instalieren kann, mann kans ja auch ohne kernel einpacken.

Lege die entsprechende windows apps bei.

PD. Wen man einen backup & restore mit MAT machen Könte wäre natürlich noch besser, jeje

morly
23.02.2015, 16:06
thanks - wenn möglich bau ich die Backupfunktion vollständig im MAT nach - teste das aber vorher ;)
Dabei hilft mir dein Beitrag sehr!

arci
23.02.2015, 20:56
Hello at All ...
Sorry if I'm intruding ...

... but it would be useful to predict the possibility of a new image installation with adeguate sizing partitioning of the DOM ...

I remind you that now with all distros E2 (HDMU including) the use of the original DOM 256MB is no longer possible ... caused from the increase in the size of the system files in rootfs!

Then replace the DOM with higher capacities (> 512) is now inevitable ... if you do not want to use the USB or external HDD!

And even for these, the ability to choose the size of the system partition would be very functional!

AZUp has had its day ... and it's time to give this possibility!

Ciao ... :)

morly
11.03.2015, 11:22
how is azup partitioning the DOM? same sizes for 256MB and 8GB DOM's?
(I only have a 256MB one)

macmanolo
11.03.2015, 16:33
how is azup partitioning the DOM? same sizes for 256MB and 8GB DOM's?
(I only have a 256MB one)
Mit AzUp 2.2.7 die partitionen sin gleich, aber mit AzUp 2.2.8 bei grössere dom wierd für das image das dopelte platz partitioniert, also mit 2.2.7 ungefähr 170MB mit 2.2.8 ungefähr 340MB der rest wierd für hda5 bereitgeschtellt, vieleicht währe möglich eine grössere partition für image wen man die swap partition weg nimt und die auf einen pendrive tut.

Bist an wochenende komme ich an dem az nicht dram...

mfg

morly
11.03.2015, 19:18
alles klar, thx :)

macmanolo
14.03.2015, 17:06
Hi, morly, habe heute mitels MAT_v2.3_WIN einen backup von image in DOM des azbox_premiun_hd gemacht, alles ist gut gegangen und habe einen datei namens "NIL_FullBackup_USB_2015_03_13.tar.gz" bekommen, das problem war das der receiber danach nicht mehr ging, anseinen hat sich das image teilweise überschriben und muste neu geflash werden, (habe ich früer darauf hingewiesen und weis nicht ob es son mit der 2.3.2 korrigiert wurde, deswegen wolte ich nur darauif hinweisen).

1. Dieses tar.gz kan man nicht nutzen und es wieder in DOM zur flashen, aber habe einen ordner in multiboot folder gelegt und dort der backup "NIL_FullBackup_USB_2015_03_13.tar.gz" wieder expandiert, das resultat war das es funkzioniert hat mit multiboot.

2. Kanst so machen das man den backup mittels MAT auch in DOM flashen könte?

mfg

morly
14.03.2015, 19:55
hi macmanolo,
ich teste momentan einiges mit der azbox - I'll keep you informed ;)

morly
15.03.2015, 19:44
blöde Frage: wie switche ich von e2 in den rescue mode? (ohne Vol+ - also rein via telnet)

macmanolo
15.03.2015, 20:32
Ich glaube das geht nicht, auserden der az must umbeding mit der router Mittels rj45 kabel verbunden sein und am router must der dhch eingeschaltet sein damit der router den az eine ip zu legt und in den display anzeigt.

mfg

pd. Ich glaube das wen der firm korrupt ist, also zum beispielt wen es gelöst ist, bein neuer start startet der receiber allein in rescue mode...

morly
15.03.2015, 21:15
anders gelöst - thx :)

morly
21.03.2015, 11:37
Auch hier nochmal:

Neue MAT Version 2.3.3 - was jetzt möglich ist::


Flashsupport AzBoxHD
Fullbackup AzBoxHD
Bel. Partitionierung des DOM (1-4 Partitionen bel. Größe)
Somit haben jetzt auch die neuen Images auf den 256MB Dom's Platz!
Reboot into Rescue Mode
Flashen: automatischer Reboot in den RM - Flashvorgang wird dann automatisch fortgesetzt
Getrenntes Flashen von Kernel und/oder Image

macmanolo
21.03.2015, 12:25
Sehe keine Mac version :( nehme an es komm spätter.

Vielen Dank für deine bemühungen, und vor allen von den azbox anwender aus spanien.

mfg.

morly
21.03.2015, 13:45
aber jetzt :)

arci
21.03.2015, 15:08
Thank's a lot @morly ... ... I'll try later !!! :D

Best regards ...

macmanolo
21.03.2015, 21:03
Morly das backup geht überhaup nicht, habe es probiert, erstmal kom einen fehler meldung 9580 und die verbindung wierd getrent, dan wen ich endlich verbinde und einen backup machen will, wird nur der kernel geshpeichert 6,8MB der rest ist niergends zur finden, eine idee?
9581

macmanolo
21.03.2015, 23:02
Hier noch was von darkmantk von OpenSpa_Team,

"Die Anwendung erkennt leider nur den Premium-AZBOXHD anderen Modelle werden nicht erkannt und die Option Flash kann man nicht verwenden.

Fehllen noch der Elite, Premium+ und Ultra"

"apropo, haben die das Flashen probiert und ist alles gut gelaufen?. Ich sage das, weil in einem der Screenshots die SWAP-Partition ist falsch gesetzt, weil das /dev/hda2 ist für den BOOT reserviert und SWAP sollte /dev/hda3 sein. Wie man an der fstab sehen kan, ist die SWAP als /dev/hda3 zu suchen".

mfg

Joker7
22.03.2015, 00:20
..naja bzgl. der Azbox hat sich eh @morly auf "sehr dünnes Eis" gewagt .....Respekt !!!

morly
22.03.2015, 01:18
Aaaaaahhh ich Depp, falschen Toolsordner angehàngt, somit kann Fullbackup nicht gehen...
Korrigier das am Morgen.
Zu den anderen Boxen, kommen natürlich, weisst ja was ich brauche... ;)

morly
22.03.2015, 09:52
Und auch reboot in rescue mode nicht...
Gleich gibts die neue Version...

morly
22.03.2015, 11:01
WICHTIG! Die 2.3.3 war fehlerhaft (falscher Toolsordner) - somit rebootete die asbzox nicht in den rescue mode und Fullbackup war nicht möglich - bitte die 2.3.3.1 herunterladen oder den Toolsordner austauschen:
http://www.hdmedia-universe.com/board/forum.php

IMPORTANT! there was a bug in version 2.3.3 (wrong Tools folder) - rebooting azbox in rescue mode and fullbackup did so not work - please download updated version 2.3.3.1 or just change the tools folder to this version:
http://www.hdmedia-universe.com/board/forum.php

arci
22.03.2015, 11:53
Good morning @morly

Even with the new 2.3.3.1 fix version ... Type AZBox model is not managed !!!

So ... having other type model, we can not test !!!

Example : AZB Ultra ...

9582 9585

Ciao & Thanks ...

macmanolo
22.03.2015, 11:55
So morly, Toolsordner getaush und alles leuft wie es sein sollte, auser.... es dauert eine ewigkeit di datei hoch zur laden bein flashen (un die 15minuten) ist das normal? an sonsten wier es korrekt geflash, habe auch die partitions editier so das ich jetz mehr speicher frei habe.

Backup herstellung ca. 6 minuten
Backup einspielen ca. 16 minuten

Hier ein par fotos:
95839584958695879588

morly
22.03.2015, 12:14
Für alle weiteren Boxen:
http://www.hdmedia-universe.com/board/showthread.php?6804-MAT-Boxtyp-anfragen

@arci: OK wenn ich auf Deutsch schreibe?

@macmanolo: Upload ist eine normale ftp Verbindung, dauert bei mir <1 Minute - also dauert bei dir vieeeeeeel zu lange!
Reboote mal Box und versuchs nochmal, wenn wieder so langsam teste es mal via filezilla (einfach das patch.e2 versuchsweise uploaden)

arci
22.03.2015, 12:46
Für alle weiteren Boxen:
http://www.hdmedia-universe.com/board/showthread.php?6804-MAT-Boxtyp-anfragen

@arci: OK wenn ich auf Deutsch schreibe?


No ... for technical topics ... google is enough !!! :)

Even with AZBox Ultra does not change the structure of mtd partitions & of data rootfs /swap !

9592

Thanks ...

morly
22.03.2015, 13:09
Ok arci,
Which box does not work? Currently only azboxhd is supported, adding the others will be easy.
For azboxhd libboxsupporter 1.15 is needed...

- - - Aktualisiert - - -

You can see the boxsupporter version at mat startup in the log window

arci
22.03.2015, 13:34
Ok arci,
Which box does not work? Currently only azboxhd is supported, adding the others will be easy.
For azboxhd libboxsupporter 1.15 is needed...

- - - Aktualisiert - - -

You can see the boxsupporter version at mat startup in the log window

With default profile:


Box Supporter loaded with version: 0.1.15
Profile changed to: default
### START PHASE: STARTING STB ADMIN TOOL Windows 2.3.3 ###
Morly's STB Admin Tool successfully started
### COMPLETED PHASE: STARTING STB ADMIN TOOL Windows 2.3.3 ###
Box Supporter: no new version on server - continue...
Connecting to IP: 192.168.1.101 with username: root and password: HDMU
Connecting to box via telnet...OK
Query CPU type...
Received CPU type: MIPS
Query box type...
Unknown box type: ultra
Unsupported box type - starting MAT with limited support
No Mounted Movie HDD found
Tool path: chosen usb device: /dev/hda1: UUID="66163a99-37e7-4a34-960c-b8e979620288" TYPE="ext3" for the MAT tool path
Choosen partition on USB device mounted - ready for creating tool path...
Start tool at location: /var/volatile/tmp/26414
BOOTET HDMU IMAGE FOUND
FW tools transfered...OK
Command fdisk not found on box
All needed commands found on box
### COMPLETED PHASE: CONNECTING AND INITIALIZING STB ###
Box not booted from flash: flash tab deactivated
Bootargs only supported for SH4 boxes: bootargs tab deactivated
### START PHASE: INITIALIZING AND STARTING TABS ###
Box successfully initialized, now initializing and starting tools in tabs
Tab 1/9: Initializing tab: Welcome...DONE
Tab 2/9: Initializing tab: Disks/MB...DONE
Tab 3/9: Initializing tab: Plugins...DONE
Tab 4/9: Initializing tab: ChList Editor...DONE
Tab 5/9: Initializing tab: Cont-Man...DONE
Tab 6/9: Initializing tab: Logging...DONE
Tab 7/9: Initializing tab: Telnet...DONE
Tab 8/9: Initializing tab: Box Status...DONE
Tab 9/9: Initializing tab: Settings...DONE
### COMPLETED PHASE: INITIALIZING AND STARTING TABS - THE TOOL IS NOW READY TO BE USED!! ###
Flash tool received new plugin list
Part tool received new plugin list


Ciao ...

macmanolo
22.03.2015, 14:47
morly, für den Azbox die Boxtypen sind folgende:

elite
premium
premium+
ultra

Anscheinen sind sie alle gleich, was an die flash strukture anbelang, und alle benutzen den selben firmware.

mfg.

morly
22.03.2015, 15:19
Brauch dafür:


cat /proc/stb/info/model;
uname -a
Von den boxen damit die boxsupporter die boxen erkennt

macmanolo
22.03.2015, 16:45
Premium+
root@azboxhd:~# cat /proc/stb/info/model
premium+
root@azboxhd:~# uname -a
Linux azboxhd 3.3.1-opensat #1 PREEMPT Sun Jun 1 10:41:26 CEST 2014 mips GNU/Linux

morly, ich glaube der einzige unterschied ist der "cat /proc/stb/info/model"
elite
premium
premium+
ultra
das hier ist bei allen gleich.
root@azboxhd:~# uname -a
Linux azboxhd 3.3.1-opensat #1 PREEMPT Sun Jun 1 10:41:26 CEST 2014 mips GNU/Linux

mfg

macmanolo
22.03.2015, 17:27
Für alle weiteren Boxen:
@macmanolo: Upload ist eine normale ftp Verbindung, dauert bei mir <1 Minute - also dauert bei dir vieeeeeeel zu lange!
Reboote mal Box und versuchs nochmal, wenn wieder so langsam teste es mal via filezilla (einfach das patch.e2 versuchsweise uploaden)

Habbe es noch ein mal geflash...
Found AzBox in rescue mode, start flashing procedure...
Uploading file: cram.img
Copying image...
Flashing DONE! it took: 23 minutes and 43 seconds
Box disconnected!
Backup/Restore: source changed

Lege noch den kompleten log bei.

9594

mfg

morly
22.03.2015, 17:53
morly, ich glaube der einzige unterschied ist der "cat /proc/stb/info/model"
elite
premium
premium+
ultra


online mit BoxSupporter 1.16 (momentan nur Windows)
@arci: your box should now be recognized
@macmanolo: wieder der Upload der so lange braucht? Flashen benötigt bei mir 2 Minuten. Was wählst du als Toolordner wenn du dich im rescue mode verbindest?

- - - Aktualisiert - - -

mac, versuch beim Flashen mal /tmp als mat toolpfad

macmanolo
22.03.2015, 18:01
@macmanolo: wieder der Upload der so lange braucht? Flashen benötigt bei mir 2 Minuten. Was wählst du als Toolordner wenn du dich im rescue mode verbindest?Internal hardisk als /media/hdd, der flash vorgang davor war mit /media/usb da der hardisk in xtension2 formatiert war und ging nicht, jetz habe ich in mit xtension3 formatiert aber es dauert das selber.

mfg

- - - Updated - - -

Probiere gleich mit /tmp

Noch was, wen möglich brauchte die 32bits version für Linux damit darkmantk es ausprobieren kann da er eine 32bit version zum kompilieren der firms von OpenSpa benutz.

mfg

morly
22.03.2015, 18:06
32bit Version bau ich dir morgen

macmanolo
22.03.2015, 18:07
Ok, vielendank.

Edit-------------
Gerade mit /tmp probiert und ales sauschnell gelaufen, danke nochmal:
Successfully initialized tool after rebooting; continue...
Found AzBox in rescue mode, start flashing procedure...
Uploading file: cram.img
Copying image...
Flashing DONE! it took: 1 minute and 21 seconds
Box disconnected!
Backup/Restore: source changed

mfg

arci
22.03.2015, 18:28
online mit BoxSupporter 1.16 (momentan nur Windows)
@arci: your box should now be recognized


Thanks @morly ... :)



Box Supporter loaded with version: 0.1.16
Profile changed to: azboxhd
### START PHASE: STARTING STB ADMIN TOOL Windows 2.3.3 ###
Morly's STB Admin Tool successfully started
### COMPLETED PHASE: STARTING STB ADMIN TOOL Windows 2.3.3 ###
Box Supporter: no new version on server - continue...
Connecting to IP: 192.168.1.101 with username: root and password: HDMU
Connecting to box via telnet...OK
Query CPU type...
Received CPU type: MIPS
Query box type...
Boxtype received: azboxhd
Change USB/MB tab to default
No Mounted Movie HDD found
Tool path: chosen usb device: /dev/sda1: UUID="ed26022c-c6cc-41e8-aa0c-2439535ae894" TYPE="ext3" for the MAT tool path
Choosen partition on USB device mounted - ready for creating tool path...
Start tool at location: /
BOOTET HDMU IMAGE FOUND
FW tools transfered...OK
Command fdisk not found on box
All needed commands found on box
### COMPLETED PHASE: CONNECTING AND INITIALIZING STB ###
Bootargs only supported for SH4 boxes: bootargs tab deactivated
### START PHASE: INITIALIZING AND STARTING TABS ###
Box successfully initialized, now initializing and starting tools in tabs
Tab 1/10: Initializing tab: Welcome...DONE
Tab 2/10: Initializing tab: Flash...DONE
Tab 3/10: Initializing tab: Disks/MB...DONE
Tab 4/10: Initializing tab: Plugins...DONE
Tab 5/10: Initializing tab: ChList Editor...DONE
Tab 6/10: Initializing tab: Cont-Man...DONE
Tab 7/10: Initializing tab: Logging...DONE
Tab 8/10: Initializing tab: Telnet...DONE
Tab 9/10: Initializing tab: Box Status...DONE
Tab 10/10: Initializing tab: Settings...DONE
### COMPLETED PHASE: INITIALIZING AND STARTING TABS - THE TOOL IS NOW READY TO BE USED!! ###
Flash tool received new plugin list
Part tool received new plugin list


Perfect ... AZBox Ultra recognized and proceeded to repartitioning DOM (ext3,ext3,swap) with installation on /dev/hda (original 256 MB) !!!

9597 9598 9599

A new era begins for AZBox !!! Tested continued ...

A my Best regards ... Ciao ... :cool:

morly
22.03.2015, 18:32
Dann liegts bei den anderen versuchen am usb device...
So wie beim le5zten versuch soll es sein... hab ca 30x geflasht und klappte immer problemlos ;)
Nur beim fullbackup klappts mit /tmp nicht, ich nutze entweder die moviepart oder steck einen bel. stick an

- - - Aktualisiert - - -

Thx arci :)

morly
23.03.2015, 11:44
Noch was, wen möglich brauchte die 32bits version für Linux damit darkmantk es ausprobieren kann da er eine 32bit version zum kompilieren der firms von OpenSpa benutz.


erledigt!

macmanolo
23.03.2015, 12:15
Danke morly noch mals, werde ich sofort weiter leiten.

mfg

morly
23.03.2015, 12:19
Momentan checke ich nur den Boxtyp und die mtd Config,
sollte vor dem Flashen sonst noch was gecheckt werden (running Kernelversion, ...)? Damit nichts passieren kann?

Currently I only check box type and the mtd configuration,
anything else that should be checked before flashing (e.g. running kernel version) not to harm the box?

macmanolo
23.03.2015, 19:34
hi morly, was ist aus der übersetzungs project geworden?

Die spanier fragen mich ob das möglich währe...

mfg

morly
23.03.2015, 19:44
Klar ist das möglich,
aber nur von Englisch auf Spanisch - wär das OK für dich?

macmanolo
23.03.2015, 19:49
Wie meins du das? Deutch & Spanisch oder Englisch & Spanisch.

Im prinzip währe mir egal haupsache die spanier verstehen was da steht.

mfg

morly
23.03.2015, 19:54
Die Elemente, die zu übersetzen sind, kann ich nur auf Englisch anbieten.
Anders gesagt: sprichst du Englisch? Wenn ja kann ich dir alles, was du benötigst, schicken

macmanolo
23.03.2015, 20:25
Dan schick mir was du hast und wen ich etwas nicht verstehe dan reiche ich das weiter.

mfg

morly
23.03.2015, 20:39
OK - dann gibts bald ne spanische Übersetzung :)

arci
23.03.2015, 23:55
Momentan checke ich nur den Boxtyp und die mtd Config,
sollte vor dem Flashen sonst noch was gecheckt werden (running Kernelversion, ...)? Damit nichts passieren kann?

Currently I only check box type and the mtd configuration,
anything else that should be checked before flashing (e.g. running kernel version) not to harm the box?

Hi @morly

Only one question for custom secure use ! :)

For the management of kernel version (licensed and unlicensed) ... did you remember the question of change boot environment XENV (y.start) ?



http://www.hdmedia-universe.com/board/showthread.php?6804-MAT-Boxtyp-anfragen&p=79360&viewfull=1#post79360


I would not that anyone will try to flash a old licensed kernel version and then AZBox don't start regulary "Booting"! ... a little bit bad ... but then they have to restore XENV variable ... from UART with YAMON console !

Ciao ...

morly
24.03.2015, 18:45
thx arci, currently implementing old vs. new kernel...
only question: new kernels have ULK in name - old ones not - is this enough to differentiate them?

arci
25.03.2015, 00:43
thx arci, currently implementing old vs. new kernel...
only question: new kernels have ULK in name - old ones not - is this enough to differentiate them?

In simple terms ...

The ULK definition is one of the rules imposed by @The_Ripper and @Telesat to easily recognize the kernel version inside file patch.e2 container and being able to manage it from their AZUp Tool !!!

For a more professional control ... for example ... you could discriminate (FNIB) magic header that on unlicensed kernel version (vmlinux_xload.zbf) start always from offset address x00000090h ... while ... on the licensed version (xrpc_xload_vmlinux_ES4_prod.bin) at this offset address begins data area for Hash customer key definitions (Sigma SDK) for SoC's XRPC control & decrypt kernel on VRAM.

Another thing to be recommended for the MAT tool ... before nor-flash writing process ... you always have to check that PLL divider clock is set to normal (SoC not overclocked) otherwise you risk corrupting the data on the nor-flash ... in this case the receiver can be recovered only with Jtag procedure or replacing nor-flash with other one already programmed !

On XENV data environment (setxenv):

XENV Block "Overclocked" PLL clock divider settings


(0x00) 4 x.pll3 0x01020065


XENV Block "Normal" PLL clock divider settings


(0x00) 4 x.pll3 0x01020057


XENV Block "Normal" PLL clock divider variable set:


setxenv -b x.pll3 0x01020057


Obviously, in the case, the new setting will be effective only after a reboot of the receiver !!!

Ciao ...

morly
25.03.2015, 09:14
implemented - thx (with next version)

morly
25.03.2015, 20:34
The ULK definition is one of the rules imposed by @The_Ripper and @Telesat to easily recognize the kernel version inside file patch.e2 container and being able to manage it from their AZUp Tool !!!

For a more professional control ... for example ... you could discriminate (FNIB) magic header that on unlicensed kernel version (vmlinux_xload.zbf) start always from offset address x00000090h ... while ... on the licensed version (xrpc_xload_vmlinux_ES4_prod.bin) at this offset address begins data area for Hash customer key definitions (Sigma SDK) for SoC's XRPC control & decrypt kernel on VRAM

My problem is, if I create a fullbackup I don't have the ULK info available anymore...
so I need a way to find it out just having the kernel.img or of the running system

Can you give me some more details to the more professional control?

arci
26.03.2015, 01:59
My problem is, if I create a fullbackup I don't have the ULK info available anymore...
so I need a way to find it out just having the kernel.img or of the running system

Can you give me some more details to the more professional control?

There aren't many kernel versions for azbox ...

Official Opensat fw - kernel Opensat licensed
2.6.15-sigma - (Opensat key licenced)

First E2 - kernel version licensed
2.6.22.19-19-the_ripper- Sigma Licensed (? key)
2.6.22.19-25-the-ripper - Sigma Licensed (? key)
2.6.29-the-ripper - Sigma Licensed (? key)

Last E2 - kernel version not licensed
3.3.1-opensat - ULK
3.4.4-opensat - ULK
3.9.2-opensat - ULK

Example ... simple verification method for reconstruction e2 image info:


root@azboxhd:~# uname -a
Linux azboxhd 3.3.1-opensat #1 PREEMPT Thu Mar 5 02:59:52 CET 2015 mips GNU/Linux

root@azboxhd:~# cat /etc/motd
HDMU 13881
Git 1956

root@azboxhd:~# cat /etc/version
201503241537

root@azboxhd:~# cat /etc/.box
azboxhd

root@azboxhd:~# cat /proc/model
ultra


plus check with ... setxenv -f /dev/mtdblock/0 ... if you want verify "y.start" start point set ... for confirmation !!!


root@azboxhd:~# setxenv -f /dev/mtdblock/0
(0x00) 4 a.avclk_mux 00.00.00.00. 0x00000000
(0x00) 8 a.board_id 22.38.35.32.2d.45.32.22. "852-E2"
(0x00) 4 a.cd2_freq 00.d8.b8.05. 0x05b8d800
(0x00) 4 a.cd4_freq 55.a0.fc.01. 0x01fca055
(0x00) 4 a.cd5_freq 40.78.7d.01. 0x017d7840
(0x00) 4 a.cd6_freq 00.2d.31.01. 0x01312d00
(0x00) 4 a.cd7_freq 00.2d.31.01. 0x01312d00
(0x00) 4 a.chip_rev 86.00.34.86. 0x86340086
(0x00) 4 a.enable_devices ce.1a.02.00. 0x00021ace
(0x00) 4 a.gpio_data 00.00.00.76. 0x76000000
(0x00) 4 a.gpio_dir 38.00.00.76. 0x76000038
(0x00) 4 a.gpio_irq_map 20.08.09.20. 0x20090820
(0x00) 4 a.hostclk_mux 00.01.00.00. 0x00000100
(0x00) 4 a.irq_fall_edge_hi 00.00.00.00. 0x00000000
(0x00) 4 a.irq_fall_edge_lo 00.c0.00.00. 0x0000c000
(0x00) 4 a.irq_rise_edge_hi 9f.00.00.00. 0x0000009f
(0x00) 4 a.irq_rise_edge_lo 00.ca.28.ff. 0xff28ca00
(0x00) 4 a.pb_cs_config 40.00.0e.00. 0x000e0040
(0x00) 4 a.pb_def_timing 10.10.10.10. 0x10101010
(0x00) 4 a.pb_timing0 10.10.10.10. 0x10101010
(0x00) 4 a.pb_timing1 01.01.11.00. 0x00110101
(0x00) 4 a.pb_timing2 10.10.5f.10. 0x105f1010
(0x00) 4 a.pb_use_timing0 f4.03.00.00. 0x000003f4
(0x00) 4 a.pb_use_timing1 f3.03.00.00. 0x000003f3
(0x00) 4 a.pb_use_timing2 f8.03.00.00. 0x000003f8
(0x00) 4 a.pcidev1_irq_route 01.01.01.01. 0x01010101
(0x00) 4 a.pcidev2_irq_route 01.01.01.01. 0x01010101
(0x00) 4 a.pcidev3_irq_route 02.02.02.02. 0x02020202
(0x00) 4 a.pcidev4_irq_route 02.02.02.02. 0x02020202
(0x00) 4 a.scard_5v_pin 01.00.00.00. 0x00000001
(0x00) 4 a.scard_cmd_pin 02.00.00.00. 0x00000002
(0x00) 4 a.scard_off_pin 00.00.00.00. 0x00000000
(0x00) 4 a.uart0_baudrate 00.c2.01.00. 0x0001c200
(0x00) 4 a.uart0_gpio_data 00.00.00.00. 0x00000000
(0x00) 4 a.uart0_gpio_dir 00.00.00.00. 0x00000000
(0x00) 4 a.uart0_gpio_mode 6e.7f.00.00. 0x00007f6e
(0x00) 4 a.uart1_baudrate 80.25.00.00. 0x00002580
(0x00) 4 a.uart1_gpio_data 00.00.00.00. 0x00000000
(0x00) 4 a.uart1_gpio_dir 00.00.00.00. 0x00000000
(0x00) 4 a.uart1_gpio_mode 6e.7f.00.00. 0x00007f6e
(0x00) 4 a.uart_console_port 00.00.00.00. 0x00000000
(0x00) 4 a.uart_used_ports 02.00.00.00. 0x00000002
(0x00) 4 l.cs0_size 00.00.00.00. 0x00000000
(0x00) 4 l.cs1_size 00.00.00.00. 0x00000000
(0x00) 4 l.cs2_part1_offset 00.00.00.00. 0x00000000
(0x00) 4 l.cs2_part1_size 00.00.02.00. 0x00020000
(0x00) 4 l.cs2_part2_offset 00.00.02.00. 0x00020000
(0x00) 4 l.cs2_part2_size 00.00.02.00. 0x00020000
(0x00) 4 l.cs2_part3_offset 00.00.04.00. 0x00040000
(0x00) 4 l.cs2_part3_size 00.00.04.00. 0x00040000
(0x00) 4 l.cs2_part4_offset 00.00.08.00. 0x00080000
(0x00) 4 l.cs2_part4_size 00.00.68.00. 0x00680000
(0x00) 4 l.cs2_part5_offset 00.00.70.00. 0x00700000
(0x00) 4 l.cs2_part5_size 00.00.10.00. 0x00100000
(0x00) 4 l.cs2_parts 05.00.00.00. 0x00000005
(0x00) 4 l.cs2_size 00.00.80.00. 0x00800000
(0x00) 4 l.cs3_size 00.00.00.00. 0x00000000
(0x00) 4 x.boot 00.00.02.00. 0x00020000
(0x00) 4 x.csf 02.00.00.00. 0x00000002
(0x00) 4 x.d0.cfg ba.11.41.f3. 0xf34111ba
(0x00) 4 x.d0.dl0 44.44.0a.00. 0x000a4444
(0x00) 4 x.d1.cfg ba.11.41.f3. 0xf34111ba
(0x00) 4 x.d1.dl0 44.44.0a.00. 0x000a4444
(0x00) 4 x.ds 80.00.02.00. 0x00020080
(0x00) 4 x.dt 01.00.00.00. 0x00000001
(0x00) 4 x.mux 01.07.00.00. 0x00000701
(0x00) 10 y.gateway 22.31.30.2e.30.2e.31.2e.31.22. "10.0.1.1"
(0x00) 12 y.ipaddr 22.31.30.2e.30.2e.31.2e.31.39.39.22. "10.0.1.199"
(0x00) 3 y.startdelay 22.31.22. "1"
(0x00) 13 y.subnetmask 22.32.35.35.2e.32.35.35.2e.30.2e.30.22. "255.255.0.0"
(0x00) 4 z.boot0 00.00.04.00. 0x00040000
(0x00) 4 z.boot1 00.00.08.00. 0x00080000
(0x00) 4 z.boot2 00.00.04.00. 0x00040000
(0x00) 4 z.boot3 00.00.08.00. 0x00080000
(0x00) 16 a.build_date 22.54.44.32.31.30.3a.32.30.30.39.30.31.32.33.22. "TD210:20090123"
(0x00) 19 a.eth_mac 22.30.30.2e.30.32.2e.31.34.2e.31.39.2e.41.35.2e.43 .39.22. "00.02.14.19.A5.C9"
(0x00) 31 a.linux_cmd 22.6d.65.6d.3d.31.30.37.6d.20.63.6f.6e.73.6f.6c.65 .3d.74.74.79.53.30.2c.31.31.35.32.30.30.22. "mem=107m console=ttyS0,115200"
(0x00) 4 x.pll3 57.00.02.01. 0x01020057
(0x00) 45 y.start 64.75.6d.70.20.72.6f.6d.66.73.20.30.78.61.63.30.38 .30.30.30.30.3b.6c.6f.61.64.20.7a.62.66.20.30.78.6 1.63.30.38.30.30.39.30.3b.20.67.6f. dump romfs 0xac080000;load zbf 0xac080090; go
79 records, 1707 bytes

root@azboxhd:~#


Ciao ... :)

morly
26.03.2015, 09:58
thx arci - i thought there would be a way to analyze the kernel.img...
OK - then I mark the kernel version of the fullbackup using the kernel description (ULK for new, anything else for old kernels)...
only thing left: testing my fullbackup with azup

my new procedere:

box in rescue mode? if no reboot to rm
box overclocked? if yes switch it to normal mode and reboot
enough ram available?
started tool from /tmp? otherwise big warning for flashing
check kernel CRC on PC
check for same kernel CRC after uploading
check for same kernel CRC after flashing (if it fails - install old kernel again)
setting up environment for either old or new kernel
flash image
done

arci
26.03.2015, 12:39
thx arci - i thought there would be a way to analyze the kernel.img...
OK - then I mark the kernel version of the fullbackup using the kernel description (ULK for new, anything else for old kernels)...
only thing left: testing my fullbackup with azup

my new procedere:

box in rescue mode? if no reboot to rm
box overclocked? if yes switch it to normal mode and reboot
enough ram available?
started tool from /tmp? otherwise big warning for flashing
check kernel CRC on PC
check for same kernel CRC after uploading
check for same kernel CRC after flashing (if it fails - install old kernel again)
setting up environment for either old or new kernel
flash image
done



OK ... but three things yet:

1) box in rescue mode? if no reboot to rm

Yesterday, I have made an Italian guide for flashing AZBoxHD with the MAT and in a test phase ... at reboot the receiver did not go into rescue mode ... but it start previous stored DOM image ... and the tool is remained on waiting stalled !

Since we were still in the safety area (no flashing procedure started) I turned off the receiver and closed the tool ... then I started with the receiver already in rescue mode (STB On - Vol +) ... and of course everything went correctly !
Only, so you know ...

2) started tool from /tmp? otherwise big warning for flashing

OK ... I have not checked if already is possible ... but wanting ... it would not be appropriate to allow the cache and transfer procedure using also an USB storage device ? ... if the user prefers this ... obviously with choice conditioned by the tool !

3) check for same kernel CRC after flashing (if it fails - install old kernel again)

After you have flashed the new kernel on nor-flash and the CRC control not passes, how do you restore previous kernel version? Do you do a security backup before flashing process? I think so ... :)

Have a nice day and thanks for the great support ... Ciao

morly
26.03.2015, 12:54
@1) did he use the new Toolsfolder? Otherwise reboot to RM fails
@2) not yet - from the next version; but I already flashed from movie partition without problems
@3) of course :)

greets