PDA

Archiv verlassen und diese Seite im Standarddesign anzeigen : [done] MAT stoppt biem Anlegen der back up rules



axleu
29.10.2014, 21:29
Hallo Morly,

versuche verzweifelt mit dem MAT-Tool 2.2 bei meiner Box GM Triplex die Firmware upzudaten.

Verbinde die Box mit connect, klappt prima, Verbindung steht!
Aktiviere dann unter Menü Flash, mit rechter Maustaste "reinstall plugins", dann mit rechter Maustaste" backup/restore tools", hier mit linker Maustaste alle Rule-Kästchen markiert, dann linke Maustaste "Flashing your Box", der Prozess starte und bleibt bei "Create backup for rule 1/6: Channel_List" stehen.

Was mach ich falsch?

Danke!

Axleu


Ausgabe: Debug Browser:

Box Supporter loaded with version: 0.1.7
Profile changed to: default
### START PHASE: STARTING STB ADMIN TOOL Windows 2.2 ###
Morly's STB Admin Tool successfully started
### COMPLETED PHASE: STARTING STB ADMIN TOOL Windows 2.2 ###
Box Supporter: no new version on server - continue...
Connecting to IP: 192.168.100.33 with username: root and password: HDMU
Connecting to box via telnet...OK
Telnet prompt received: SPARK7162:~#
Query CPU type...
Received CPU type: SH4
Query box type...
Change USB/MB tab to SPARK-mod
Boxtype received: spark7162
Mounted Movie HDD found at: /media/hdd
Flash image bootet from: /dev/mtdblock6
Start tool at location: /media/hdd
BOOTET HDMU IMAGE FOUND
FW tools transfered...OK
All needed commands found on box
### COMPLETED PHASE: CONNECTING AND INITIALIZING STB ###
### START PHASE: INITIALIZING AND STARTING TABS ###
Box successfully initialized, now initializing and starting tools in tabs
Tab 1/10: Welcome successfully initialized
Disk Manager changed to: sfdisk
Loading plugin information...
Loading rules from file...
Loaded backup rule: Channel_List
Rule changed to: Channel_List
Loaded edit rule: CustomEpg
Loaded backup rule: Network_Interfaces
Loaded backup rule: samba
Loaded edit rule: Skin_NextEvents_Drei
Loaded backup rule: SoftCam
Flash tool received new rules list
Part tool received new rules list
6 backup rule(s) loaded successfully
Backup/Restore: source changed
Source changed to: Archive...
Tab 2/10: Cont-Man successfully initialized
Tab 3/10: Logging successfully initialized
Tab 4/10: Settings successfully initialized
Tab 5/10: Flash successfully initialized
Tab 6/10: Telnet successfully initialized
Tab 7/10: Disks/MB successfully initialized
Requesting bootargs via LAN...
Module i2s.ko was loaded for accessing the bootargs It is recommended to reboot the box after using the tool
Tab 8/10: Bootargs successfully initialized
Disk Manager: Disk information loaded successfully
Tab 9/10: Plugins successfully initialized
Flash tool received new plugin list
Part tool received new plugin list
Tab 10/10: Box Status successfully initialized
### COMPLETED PHASE: INITIALIZING AND STARTING TABS - THE TOOL IS NOW READY TO BE USED!! ###
Flash Plugin Tab: activated
Flash Backup Tab: activated
Flash Backup Tab: deactivated
Flash Backup Tab: activated
Flashing box image...
Create backup for rule 1/6: Channel_List

morly
30.10.2014, 10:55
geh mal in den cont-man und stelle links bootimage und rechts archive ein,
dann stellst auf die channel list Regel und machst das Backup - klappt das?

axleu
30.10.2014, 12:55
Hallo Morly,

danke für die schnelle Hilfe!

Wenn ich im Menü Cont-Man wie von Dir angegeben, links Quelle Bootimage und recht Archiv einstelle und das backup starte, fragt MAT 2.2 noch wo die Sicherungsdatei gespeichert werden soll. Dann passiert wieder nichts.


Backup/Restore: source changed
Source changed to: Bootimage
Destination changed to: Archive...
Start Backup/Restore for backup rule: Channel_List

8613

Axleu

morly
30.10.2014, 15:00
da stimmt was nicht, die in cyan dargestellten Files stimmen ja gar nicht...
verbinde dich mal und mach mir nen Screenshot vom Flash Tab (Box File Browser) - wird da die korrekte Filestruktur dargestellt?
Wenn ja - häng mir mal deine channel_list.xml an

axleu
30.10.2014, 16:49
Die Channel_list.xml ist nirgens zu finden, hab mit MidnightC von Root abwärts alles durchsucht.
Wo sollte die Datei stehen?

Anbei ein Bild der Filestruktur:
8616

morly
30.10.2014, 17:01
die ist am PC, da wo du das MAT startest, im BackupRules Verzeichnis

axleu
30.10.2014, 17:15
Sorry, anbei der Inhalt der channel_list.xml

<!DOCTYPE BackupRule>
<rule name="Channel_List">
<option kille2="yes"/>
<file rule="check" filename="/autofs/*"/>
<file rule="check" filename="/etc/*"/>
<file rule="delete_before_restore" filename="/etc/enigma2/bouquets.*"/>
<file rule="overwrite" filename="/etc/enigma2/bouquets.*"/>
<file rule="delete_before_restore" filename="/etc/enigma2/userbouquet.*"/>
<file rule="overwrite" filename="/etc/enigma2/userbouquet.*"/>
<file rule="check" filename="/usr/*"/>
<file rule="check" filename="/var/*"/>
</rule>

morly
30.10.2014, 17:20
die stimmt nicht - kein Wunder, dass es nicht klappt :)
Nimm diese bitte!
(vorher entpacken nicht vergessen)

axleu
30.10.2014, 17:28
Danke!
Jetzt gehts! Das Backup aus Cont-man läuft jetzt durch.

Gruß Axleu

morly
30.10.2014, 17:30
perfekt :)
hattest du diese geändert?

axleu
30.10.2014, 18:31
Anscheinend unabsichtlich ja.
jetzt läufts aber.:)

ReWard
30.10.2014, 20:19
.... MAT-Tool 2.2....

Bitte auch mal die neueste Version benutzen, 2.2.3.

morly
25.11.2014, 21:51
erledigt...