Dimis
16.11.2014, 23:22
Fehler... neues image startet leider nicht durch:
PYTHONPATH: /usr/lib/enigma2/python + (1) Background File Eraser
+ (5) Tuxtxt
+ (8) graphics acceleration manager
STMFB accel interface available
+ (9) GFBDC
18432k total video mem
10332k usable video mem
8712kB available for acceleration surfaces.
resolution: 720 x 576 x 32 (stride: 2880)
+ (9) gLCDDC
eDBoxLCD::eDBoxLCD >
Error loading config file!
LCD resolution: -1 x -1 x -727907064 (stride: 1701601119)
+ (9) Font Render Class
+ (10) gRC
RC thread created successfully
+ (15) eWindowStyleManager
+ (20) DVB-CI UI
+ (20) RC Input layer
+ (20) misc options
+ (20) AVSwitch Driver
couldnt open /dev/dbox/fp0 to monitor vcr scart slow blanking changed!
+ (21) input device driver
Input device "HDMU RC SPARK" is a remotecontrol
Input device "HDMU RC SPARK" is a remotecontrol
failed to open /dev/input/event2
Input device "HDMU RC SPARK" is a mouse
failed to open /dev/input/event3
Input device "HDMU RC SPARK" is a remotecontrol
Found 4 input devices.
+ (22) Hdmi CEC driver
+ (30) eActionMap
+ (35) CI Slots
scanning for common interfaces..
eDVBCIInterfaces->setInputSource(0, 0)
eDVBCIInterfaces->setInputSource(1, 1)
done, found 0 common interface slots
+ (35) CA handler
+ (40) eServiceCenter
settings instance.
+ (41) eServiceFactoryDVD
+ (41) eServiceFactoryEPlayer3
+ (41) eServiceFactoryHDMI
+ (41) eServiceFactoryM2TS
+ (41) eServiceFactoryMP3
+ (41) eServiceFactoryFS
+ (41) eServiceFactoryDVB
+ (41) Encoders
+ (41) Stream server
[SERVERSOCKET] ERROR on bind() (Address already in use)
reached rl 70
---- opening lame channel db
reading services (version 4)
loaded 246 channels/transponders and 7060 services
scanning for frontends..
opening frontend 0
close frontend 0
boxtype detection via /proc/stb/info not possible... use fallback via demux count!
found 1 adapter, 1 frontends(1 sim) and 2 demux, boxtype 0
RTC not ready... wait for transponder time
[EPGC] Initialized EPGCache (wait for setCacheFile call now)
main thread is non-idle! display spinner!
no spinner DC!
[ePNG] couldn't open /usr/local/share/enigma2/skin_default/spinner/wait13.png
found 12 spinner!
executing main
setIoPrio best-effort level 3 ok
Failed to open /dev/dbox/fp0
Scanning hardware info
Detected: spark
[Harddisk] enumerating block devices...
new Harddisk sda -> /dev/sda -> /dev/sda
[ePopen] command: ('sdparm', 'sdparm', '--set=SCT=0', '/dev/sda')
[ePopen] command: ('sdparm', 'sdparm', '-C stop', '/dev/sda')
main thread is non-idle! display spinner!
Reading satellites.xml
sec config cleared
setSlotInfo for dvb frontend 0 to slotid 0, descr STV090x Multistandard, need rotorworkaround No, enabled Yes, DVB-S2 Yes
slot: 0 configmode: simple
diseqcmode: single
sec config completed
[Picon] adding path: /media/hdd/picon/
Traceback (most recent call last):
File "/usr/lib/enigma2/python/mytest.py", line 18, in <module>
from Screens import InfoBar
File "usr/lib/enigma2/python/Screens/InfoBar.py", line 21, in <module>
File "usr/lib/enigma2/python/Screens/InfoBarGenerics.py", line 1, in <module>
ImportError: No module named ChannelSelection
---- saving lame channel db
saved 246 channels and 7060 services!
release cached channel (timer timeout)
- (41) eServiceFactoryDVD
Gruß
PYTHONPATH: /usr/lib/enigma2/python + (1) Background File Eraser
+ (5) Tuxtxt
+ (8) graphics acceleration manager
STMFB accel interface available
+ (9) GFBDC
18432k total video mem
10332k usable video mem
8712kB available for acceleration surfaces.
resolution: 720 x 576 x 32 (stride: 2880)
+ (9) gLCDDC
eDBoxLCD::eDBoxLCD >
Error loading config file!
LCD resolution: -1 x -1 x -727907064 (stride: 1701601119)
+ (9) Font Render Class
+ (10) gRC
RC thread created successfully
+ (15) eWindowStyleManager
+ (20) DVB-CI UI
+ (20) RC Input layer
+ (20) misc options
+ (20) AVSwitch Driver
couldnt open /dev/dbox/fp0 to monitor vcr scart slow blanking changed!
+ (21) input device driver
Input device "HDMU RC SPARK" is a remotecontrol
Input device "HDMU RC SPARK" is a remotecontrol
failed to open /dev/input/event2
Input device "HDMU RC SPARK" is a mouse
failed to open /dev/input/event3
Input device "HDMU RC SPARK" is a remotecontrol
Found 4 input devices.
+ (22) Hdmi CEC driver
+ (30) eActionMap
+ (35) CI Slots
scanning for common interfaces..
eDVBCIInterfaces->setInputSource(0, 0)
eDVBCIInterfaces->setInputSource(1, 1)
done, found 0 common interface slots
+ (35) CA handler
+ (40) eServiceCenter
settings instance.
+ (41) eServiceFactoryDVD
+ (41) eServiceFactoryEPlayer3
+ (41) eServiceFactoryHDMI
+ (41) eServiceFactoryM2TS
+ (41) eServiceFactoryMP3
+ (41) eServiceFactoryFS
+ (41) eServiceFactoryDVB
+ (41) Encoders
+ (41) Stream server
[SERVERSOCKET] ERROR on bind() (Address already in use)
reached rl 70
---- opening lame channel db
reading services (version 4)
loaded 246 channels/transponders and 7060 services
scanning for frontends..
opening frontend 0
close frontend 0
boxtype detection via /proc/stb/info not possible... use fallback via demux count!
found 1 adapter, 1 frontends(1 sim) and 2 demux, boxtype 0
RTC not ready... wait for transponder time
[EPGC] Initialized EPGCache (wait for setCacheFile call now)
main thread is non-idle! display spinner!
no spinner DC!
[ePNG] couldn't open /usr/local/share/enigma2/skin_default/spinner/wait13.png
found 12 spinner!
executing main
setIoPrio best-effort level 3 ok
Failed to open /dev/dbox/fp0
Scanning hardware info
Detected: spark
[Harddisk] enumerating block devices...
new Harddisk sda -> /dev/sda -> /dev/sda
[ePopen] command: ('sdparm', 'sdparm', '--set=SCT=0', '/dev/sda')
[ePopen] command: ('sdparm', 'sdparm', '-C stop', '/dev/sda')
main thread is non-idle! display spinner!
Reading satellites.xml
sec config cleared
setSlotInfo for dvb frontend 0 to slotid 0, descr STV090x Multistandard, need rotorworkaround No, enabled Yes, DVB-S2 Yes
slot: 0 configmode: simple
diseqcmode: single
sec config completed
[Picon] adding path: /media/hdd/picon/
Traceback (most recent call last):
File "/usr/lib/enigma2/python/mytest.py", line 18, in <module>
from Screens import InfoBar
File "usr/lib/enigma2/python/Screens/InfoBar.py", line 21, in <module>
File "usr/lib/enigma2/python/Screens/InfoBarGenerics.py", line 1, in <module>
ImportError: No module named ChannelSelection
---- saving lame channel db
saved 246 channels and 7060 services!
release cached channel (timer timeout)
- (41) eServiceFactoryDVD
Gruß