E2 startet nicht!

[sirtobie]

Habe das neue Update eingespielt (13415 etc.), aber jetzt startet e2 nicht mehr.
Siehe Log:






hdmu 4 xpeedlx






xpeedlx login: root
Password:
Last login: Thu Jan 1 01:00:35 CET 1970 on pts/1
HDMU 13415
Git 1909
root

# # ###### # # # #
# # # # ## ## # #
# # # # # # # # # #
####### # # # # # # #
# # # # # # # #
# # # # # # # #
# # ###### # # #####


+++++++++++++++++: System Data :+++++++++++++++++++
+ Box = xpeedlx
+ HDMU Rev = 13415
+ GIT Rev = 1909
+ Hostname = xpeedlx
+ Kernel = 3.12.1
+ Uptime = 01:00:41 up 0 min, load average: 2.15, 0.52, 0.17
+ CPU = Broadcom BMIPS3300 V3.2
+Memory Total = 235728 kB
+ Memory Free = 127136 kB

root@xpeedlx:~# setconsole
root@xpeedlx:~# PYTHONPATH: /usr/lib/enigma2/python
+ (1) Background File Eraser
+ (5) Tuxtxt
+ (8) graphics acceleration manager
BCM accel interface not available - Inappropriate ioctl for device
+ (9) GFBDC
10800k video mem
- double buffering available!
7560kB available for acceleration surfaces.
resolution: 720 x 576 x 32 (stride: 2880)
+ (9) gLCDDC
found OLED display!
lcd buffer 0x7d9fc0 8448 bytes, stride 132
LCD resolution: 132 x 64 x 8 (stride: 132)
+ (9) Font Render Class
+ (10) gRC
RC thread created successfully
+ (15) eWindowStyleManager
+ (20) DVB-CI UI
+ (20) UHF Modulator
couldnt open /dev/rfmod0!!!!
+ (20) RC Input layer
+ (20) misc options
+ (20) AVSwitch Driver
couldnt open /dev/dbox/fp0 to monitor vcr scart slow blanking changed!
+ (21) input device driver
Input device "dreambox front panel" is a remotecontrol
Input device "dreambox advanced remote control (native)" is a keyboard
Found 2 input devices.
+ (22) Hdmi CEC driver
+ (30) eActionMap
+ (35) CI Slots
scanning for common interfaces..
CI Slot 0 setSource(0)
eDVBCIInterfaces->setInputSource(0, 0)
eDVBCIInterfaces->setInputSource(1, 1)
done, found 1 common interface slots
+ (35) CA handler
+ (40) eServiceCenter
settings instance.
+ (41) eServiceFactoryDVD
+ (41) eServiceFactoryHDMI
+ (41) eServiceFactoryM2TS
+ (41) eServiceFactoryMP3
+ (41) eServiceFactoryFS
+ (41) eServiceFactoryDVB
+ (41) Encoders
+ (41) Stream server
reached rl 70
---- opening lame channel db
reading services (version 4)
main thread is non-idle! display spinner!
no spinner DC!
loaded 236 channels/transponders and 6146 services
scanning for frontends..
opening frontend 0
close frontend 0
found 1 adapter, 1 frontends(1 sim) and 5 demux, boxtype 3
RTC not ready... wait for transponder time
[EPGC] Initialized EPGCache (wait for setCacheFile call now)
[ePNG] couldn't open /usr/share/enigma2/skin_default/spinner/wait13.png
found 12 spinner!


executing main
setIoPrio best-effort level 3 ok
main thread is non-idle! display spinner!
Scanning hardware info
Detected: ini-1000de (20141105)
Failed to open /dev/dbox/fp0
couldn't open /proc/stb/misc/12V_output
[Harddisk] enumerating block devices...
new Harddisk sda -> /dev/sda -> /dev/sda
[ePopen] command: ('sdparm', 'sdparm', '--set=SCT=0', '/dev/sda')
[ePopen] command: ('sdparm', 'sdparm', '-C stop', '/dev/sda')
sec config cleared
setSlotInfo for dvb frontend 0 to slotid 0, descr DVB-S2 INTERNAL, need rotorworkaround No, enabled Yes, DVB-S2 Yes
slot: 0 configmode: simple
diseqcmode: single
sec config completed
Renumbering...
- double buffering available!
3600kB available for acceleration surfaces.
resolution: 1280 x 720 x 32 (stride: 5120)
libpng warning: iCCP: known incorrect sRGB profile
libpng warning: iCCP: cHRM chunk does not match sRGB
libpng warning: iCCP: known incorrect sRGB profile
libpng warning: iCCP: cHRM chunk does not match sRGB
FATAL: failed: Operation not permitted
Killed
PYTHONPATH: /usr/lib/enigma2/python
+ (1) Background File Eraser
+ (5) Tuxtxt
+ (8) graphics acceleration manager
BCM accel interface not available - Inappropriate ioctl for device
+ (9) GFBDC
10800k video mem
- double buffering available!
3600kB available for acceleration surfaces.
resolution: 1280 x 720 x 32 (stride: 5120)
+ (9) gLCDDC
found OLED display!
lcd buffer 0x7d9fc0 8448 bytes, stride 132
LCD resolution: 132 x 64 x 8 (stride: 132)
+ (9) Font Render Class
+ (10) gRC
RC thread created successfully
+ (15) eWindowStyleManager
+ (20) DVB-CI UI
+ (20) UHF Modulator
couldnt open /dev/rfmod0!!!!
+ (20) RC Input layer
+ (20) misc options
+ (20) AVSwitch Driver
couldnt open /dev/dbox/fp0 to monitor vcr scart slow blanking changed!
+ (21) input device driver
Input device "dreambox front panel" is a remotecontrol
Input device "dreambox advanced remote control (native)" is a keyboard
Found 2 input devices.
+ (22) Hdmi CEC driver
+ (30) eActionMap
+ (35) CI Slots
scanning for common interfaces..
CI Slot 0 setSource(0)
eDVBCIInterfaces->setInputSource(0, 0)
eDVBCIInterfaces->setInputSource(1, 1)
done, found 1 common interface slots
+ (35) CA handler
+ (40) eServiceCenter
settings instance.
+ (41) eServiceFactoryDVD
+ (41) eServiceFactoryHDMI
+ (41) eServiceFactoryM2TS
+ (41) eServiceFactoryMP3
+ (41) eServiceFactoryFS
+ (41) eServiceFactoryDVB
+ (41) Encoders
+ (41) Stream server
reached rl 70
---- opening lame channel db
reading services (version 4)
loaded 236 channels/transponders and 6146 services
scanning for frontends..
opening frontend 0
close frontend 0
found 1 adapter, 1 frontends(1 sim) and 5 demux, boxtype 3
RTC not ready... wait for transponder time
[EPGC] Initialized EPGCache (wait for setCacheFile call now)
[ePNG] couldn't open /usr/share/enigma2/skin_default/spinner/wait13.png
found 12 spinner!


executing main
setIoPrio best-effort level 3 ok
Scanning hardware info
Detected: ini-1000de (20141105)
Failed to open /dev/dbox/fp0
couldn't open /proc/stb/misc/12V_output
[Harddisk] enumerating block devices...
new Harddisk sda -> /dev/sda -> /dev/sda
[ePopen] command: ('sdparm', 'sdparm', '--set=SCT=0', '/dev/sda')
[ePopen] command: ('sdparm', 'sdparm', '-C stop', '/dev/sda')
main thread is non-idle! display spinner!
sec config cleared
setSlotInfo for dvb frontend 0 to slotid 0, descr DVB-S2 INTERNAL, need rotorworkaround No, enabled Yes, DVB-S2 Yes
slot: 0 configmode: simple
diseqcmode: single
sec config completed
Renumbering...
libpng warning: iCCP: known incorrect sRGB profile
libpng warning: iCCP: cHRM chunk does not match sRGB
libpng warning: iCCP: known incorrect sRGB profile
libpng warning: iCCP: cHRM chunk does not match sRGB
FATAL: failed: Operation not permitted
Killed
PYTHONPATH: /usr/lib/enigma2/python
+ (1) Background File Eraser
+ (5) Tuxtxt
+ (8) graphics acceleration manager
BCM accel interface not available - Inappropriate ioctl for device
+ (9) GFBDC
10800k video mem
- double buffering available!
3600kB available for acceleration surfaces.
resolution: 1280 x 720 x 32 (stride: 5120)
+ (9) gLCDDC
found OLED display!
lcd buffer 0x7d9fc0 8448 bytes, stride 132
LCD resolution: 132 x 64 x 8 (stride: 132)
+ (9) Font Render Class
+ (10) gRC
RC thread created successfully
+ (15) eWindowStyleManager
+ (20) DVB-CI UI
+ (20) UHF Modulator
couldnt open /dev/rfmod0!!!!
+ (20) RC Input layer
+ (20) misc options
+ (20) AVSwitch Driver
couldnt open /dev/dbox/fp0 to monitor vcr scart slow blanking changed!
+ (21) input device driver
Input device "dreambox front panel" is a remotecontrol
Input device "dreambox advanced remote control (native)" is a keyboard
Found 2 input devices.
+ (22) Hdmi CEC driver
+ (30) eActionMap
+ (35) CI Slots
scanning for common interfaces..
CI Slot 0 setSource(0)
eDVBCIInterfaces->setInputSource(0, 0)
eDVBCIInterfaces->setInputSource(1, 1)
done, found 1 common interface slots
+ (35) CA handler
+ (40) eServiceCenter
settings instance.
+ (41) eServiceFactoryDVD
+ (41) eServiceFactoryHDMI
+ (41) eServiceFactoryM2TS
+ (41) eServiceFactoryMP3
+ (41) eServiceFactoryFS
+ (41) eServiceFactoryDVB
+ (41) Encoders
+ (41) Stream server
reached rl 70
---- opening lame channel db
reading services (version 4)
loaded 236 channels/transponders and 6146 services
scanning for frontends..
opening frontend 0
close frontend 0
found 1 adapter, 1 frontends(1 sim) and 5 demux, boxtype 3
RTC not ready... wait for transponder time
[EPGC] Initialized EPGCache (wait for setCacheFile call now)
[ePNG] couldn't open /usr/share/enigma2/skin_default/spinner/wait13.png
found 12 spinner!


executing main
setIoPrio best-effort level 3 ok
Scanning hardware info
Detected: ini-1000de (20141105)
Failed to open /dev/dbox/fp0
couldn't open /proc/stb/misc/12V_output
[Harddisk] enumerating block devices...
new Harddisk sda -> /dev/sda -> /dev/sda
[ePopen] command: ('sdparm', 'sdparm', '--set=SCT=0', '/dev/sda')
[ePopen] command: ('sdparm', 'sdparm', '-C stop', '/dev/sda')
main thread is non-idle! display spinner!
sec config cleared
setSlotInfo for dvb frontend 0 to slotid 0, descr DVB-S2 INTERNAL, need rotorworkaround No, enabled Yes, DVB-S2 Yes
slot: 0 configmode: simple
diseqcmode: single
sec config completed
Renumbering...
libpng warning: iCCP: known incorrect sRGB profile
libpng warning: iCCP: cHRM chunk does not match sRGB
libpng warning: iCCP: known incorrect sRGB profile
libpng warning: iCCP: cHRM chunk does not match sRGB
FATAL: failed: Operation not permitted
Killed
PYTHONPATH: /usr/lib/enigma2/python
+ (1) Background File Eraser
+ (5) Tuxtxt
+ (8) graphics acceleration manager
BCM accel interface not available - Inappropriate ioctl for device
+ (9) GFBDC
10800k video mem
- double buffering available!
3600kB available for acceleration surfaces.
resolution: 1280 x 720 x 32 (stride: 5120)
+ (9) gLCDDC
found OLED display!
lcd buffer 0x7d9fc0 8448 bytes, stride 132
LCD resolution: 132 x 64 x 8 (stride: 132)
+ (9) Font Render Class
+ (10) gRC
RC thread created successfully
+ (15) eWindowStyleManager
+ (20) DVB-CI UI
+ (20) UHF Modulator
couldnt open /dev/rfmod0!!!!
+ (20) RC Input layer
+ (20) misc options
+ (20) AVSwitch Driver
couldnt open /dev/dbox/fp0 to monitor vcr scart slow blanking changed!
+ (21) input device driver
Input device "dreambox front panel" is a remotecontrol
Input device "dreambox advanced remote control (native)" is a keyboard
Found 2 input devices.
+ (22) Hdmi CEC driver
+ (30) eActionMap
+ (35) CI Slots
scanning for common interfaces..
CI Slot 0 setSource(0)
eDVBCIInterfaces->setInputSource(0, 0)
eDVBCIInterfaces->setInputSource(1, 1)
done, found 1 common interface slots
+ (35) CA handler
+ (40) eServiceCenter
settings instance.
+ (41) eServiceFactoryDVD
+ (41) eServiceFactoryHDMI
+ (41) eServiceFactoryM2TS
+ (41) eServiceFactoryMP3
+ (41) eServiceFactoryFS
+ (41) eServiceFactoryDVB
+ (41) Encoders
+ (41) Stream server
reached rl 70
---- opening lame channel db
reading services (version 4)
loaded 236 channels/transponders and 6146 services
scanning for frontends..
opening frontend 0
close frontend 0
found 1 adapter, 1 frontends(1 sim) and 5 demux, boxtype 3
RTC not ready... wait for transponder time
[EPGC] Initialized EPGCache (wait for setCacheFile call now)
[ePNG] couldn't open /usr/share/enigma2/skin_default/spinner/wait13.png
found 12 spinner!


executing main
setIoPrio best-effort level 3 ok
Scanning hardware info
Detected: ini-1000de (20141105)
Failed to open /dev/dbox/fp0
couldn't open /proc/stb/misc/12V_output
[Harddisk] enumerating block devices...
new Harddisk sda -> /dev/sda -> /dev/sda
[ePopen] command: ('sdparm', 'sdparm', '--set=SCT=0', '/dev/sda')
[ePopen] command: ('sdparm', 'sdparm', '-C stop', '/dev/sda')
main thread is non-idle! display spinner!
sec config cleared
setSlotInfo for dvb frontend 0 to slotid 0, descr DVB-S2 INTERNAL, need rotorworkaround No, enabled Yes, DVB-S2 Yes
slot: 0 configmode: simple
diseqcmode: single
sec config completed
Renumbering...
libpng warning: iCCP: known incorrect sRGB profile
libpng warning: iCCP: cHRM chunk does not match sRGB
libpng warning: iCCP: known incorrect sRGB profile
libpng warning: iCCP: cHRM chunk does not match sRGB
FATAL: failed: Operation not permitted
Killed
PYTHONPATH: /usr/lib/enigma2/python
+ (1) Background File Eraser
+ (5) Tuxtxt
+ (8) graphics acceleration manager
BCM accel interface not available - Inappropriate ioctl for device
+ (9) GFBDC
10800k video mem
- double buffering available!
3600kB available for acceleration surfaces.
resolution: 1280 x 720 x 32 (stride: 5120)
+ (9) gLCDDC
found OLED display!
lcd buffer 0x7d9fc0 8448 bytes, stride 132
LCD resolution: 132 x 64 x 8 (stride: 132)
+ (9) Font Render Class
+ (10) gRC
RC thread created successfully
+ (15) eWindowStyleManager
+ (20) DVB-CI UI
+ (20) UHF Modulator
couldnt open /dev/rfmod0!!!!
+ (20) RC Input layer
+ (20) misc options
+ (20) AVSwitch Driver
couldnt open /dev/dbox/fp0 to monitor vcr scart slow blanking changed!
+ (21) input device driver
Input device "dreambox front panel" is a remotecontrol
Input device "dreambox advanced remote control (native)" is a keyboard
Found 2 input devices.
+ (22) Hdmi CEC driver
+ (30) eActionMap
+ (35) CI Slots
scanning for common interfaces..
CI Slot 0 setSource(0)
eDVBCIInterfaces->setInputSource(0, 0)
eDVBCIInterfaces->setInputSource(1, 1)
done, found 1 common interface slots
+ (35) CA handler
+ (40) eServiceCenter
settings instance.
+ (41) eServiceFactoryDVD
+ (41) eServiceFactoryHDMI
+ (41) eServiceFactoryM2TS
+ (41) eServiceFactoryMP3
+ (41) eServiceFactoryFS
+ (41) eServiceFactoryDVB
+ (41) Encoders
+ (41) Stream server
reached rl 70
---- opening lame channel db
reading services (version 4)
loaded 236 channels/transponders and 6146 services
scanning for frontends..
opening frontend 0
close frontend 0
found 1 adapter, 1 frontends(1 sim) and 5 demux, boxtype 3
RTC not ready... wait for transponder time
[EPGC] Initialized EPGCache (wait for setCacheFile call now)
[ePNG] couldn't open /usr/share/enigma2/skin_default/spinner/wait13.png
found 12 spinner!


executing main
setIoPrio best-effort level 3 ok

[bonkel]

hast du per stick neu geflashed?

[sirtobie]

Nö, ich hatte ein online Update gemacht.
Habe aber mittlerweile neu geflasht, ohne Settings Übernahme.
Jetzt geht alles.

[Markus10000]

Das Problem hatte ich auch, wieso läuft er nach einem Online Update nicht mehr. Sonder nur wenn ich es per Stick flasche ? Ich muss dann jedes mal die Plugins neu installieren.

[santa]

Es gibt manchmal Updates die per online Update nicht aktualisiert werden können, somit muss man manchmal neu flashen.

[Markus10000]

Gibt es eine Möglichkeit das ich die Plugins die vorher drauf waren schneller wieder auf den Receiver zu bekommen, ohne das ich jedes Plugin einzeln downloaden muss ?

[flac]

Backup machen. Aber drauf achten das eventuelle abhängige Dateien fürs Plugin mit gesichert werden müssen.
... in /var/opkg/info/ nach sehen, welches Plugin was für Dateien installiert hat.


Gruß

Chris

[santa]

Schau dir mal das mat an, da kann man flashen und plugins werden nach Installation auch neu drauf gepackt.

[/dev/null]

Ich löse das per Script (was Bestandteil vom Backup ist), dabei wird bei jedem Neustart der Box überprüft ob die Plugins noch aktuell sind bzw. werden sie nach einem Image update neuinstalliert. Spart Zeit und ich muss nicht immer den Rechner anschmeissen. :D


opkg update
opkg update
i=0
cat "/hdd/boxware/pluginlist" | while read line; do
echo plugin ueberpruefen
i=$(( $i + 1 ))
if [ ! "$line" = "$(opkg list-installed | grep "$line")" ] || [ ! "$line" = "$(opkg list | grep "$line" | cut -d" " -f1-3)" ]; then
opkg install "$(echo "$line" | cut -d" " -f1)" || find "/hdd/boxware" -name "$(echo "$line" |cut -d" " -f1)*" -exec opkg install {} \;
echo $line
if [ $i = $(cat "/hdd/boxware/pluginlist" | wc -l) ]; then
shutdown -r now
else
wget -O /dev/null "http://sz/web/message?text=Plugins%20update,%20Bitte%20neustarte n!&type=2"
fi
fi
done

Die Datei pluginlist kann man zum Beispiel so anlegen

opkg list-installed | egrep -v "hdmu|rcs" >/hdd/wohin_ich_will/pluginlist


MfG