rangerm
31.01.2015, 12:21
Da Assi läuft schon mal durch :)
Startzeit ab Netzschalter 38sec
Ab Neustart 45sec
Umschaltzeiten sind schon mal sehr sehr..... viel besser wie bei ATV,bin ehrlich gesagt schockiert wie schlecht die sind.
Aber egal kommen wir zum Image, der Grund warum man diese Box kauft ist natürlich der Display.
Im Display Menü fehlt die Funktion den live TV abzuschalten.
Einstellung (Power on Diplay) ohne Funktion.
LCD Linux hab jetzt die vom Feed und atv forum getestet beide ohne funktion fehlende Module.
Wenn ich mehr Zeit hab beschäftige ich mich selbt mit dem Problem aber wer´s anschauen will ;)
Hab mal bisschen mitgelogt....
Vom Start
hdmu 4 et8500
et8500 login: root
Password:
Last login: Sat Jan 31 12:11:04 CET 2015 on pts/1
HDMU 13668
Git 1926
[1;31m
# # ###### # # # #
# # # # ## ## # #
# # # # # # # # # #
####### # # # # # # #
# # # # # # # #
# # # # # # # #
# # ###### # # #####
[0;35m+++++++++++++++++: [0;37mSystem Data[0;35m :+++++++++++++++++++
[0;35m+ [0;37mBox [0;35m= [1;32met8500
[0;35m+ [0;37mHDMU Rev [0;35m= [1;32m13668
[0;35m+ [0;37mGIT Rev [0;35m= [1;32m1926
[0;35m+ [0;37mHostname [0;35m= [1;32met8500
[0;35m+ [0;37mKernel [0;35m= [1;32m3.14.21
[0;35m+ [0;37mUptime [0;35m=[1;32m 12:11:47 up 15 min, load average: 0.47, 0.19, 0.10
[0;35m+ [0;37mCPU [0;35m=[1;32m Broadcom BMIPS5000 V1.1 FPU V0.1
[0;35m+[0;37mMemory Total [0;35m= [1;32m310316 kB
[0;35m+ [0;37mMemory Free [0;35m= [1;32m175676 kB
[0m
root@et8500:~# [6n[6n[eDVBCAService] free slot 0 demux 0 for service 1:0:1:445C:453:1:C00000:0:0:0:
[eDVBCAService] free service 1:0:1:445C:453:1:C00000:0:0:0:
decoder state: play, vpid=-1, apid=-1
DEMUX_STOP - pcr - ok
DEMUX_STOP - video - ok
VIDEO_STOP - ok
AUDIO_STOP - ok
DEMUX_STOP - audio - ok
AUDIO_CONTINUE - ok
DEMUX_STOP - ttx - ok
TuxTxt stopped service 20
cleaning up
TuxTxt cache cleared
start release channel timer
[SKIN] Parsing embedded skin <embedded-in-'QuitMainloopScreen'>
[SKIN] Parsing embedded skin <embedded-in-'TryQuitMainloop'>
[SKIN] Parsing embedded skin <embedded-in-'SimpleSummary'>
connectionLost? [Failure instance: Traceback (failure with no frames): <class 'twisted.internet.error.ConnectionLost'>: Connection to the other side was lost in a non-clean fashion: Connection lost.
]
---- saving lame channel db
saved 246 channels and 7063 services!
release cached channel (timer timeout)
[eDVBLocalTimerHandler] remove channel 0x1c0e390
[eEPGCache] remove channel 0x1c0e390
stop release channel timer
[EPGC] store epg to realpath '/media/hdd/epg.dat'
[EPGC] 8772 events written to /hdd/epg.dat
set RTC to previous valid time
close frontend 0
- (41) eServiceFactoryDVD
- (41) eServiceFactoryHDMI
- (41) eServiceFactoryM2TS
- (41) eServiceFactoryMP3
- (41) eServiceFactoryFS
- (41) eServiceFactoryDVB
- (41) Encoders
- (41) Stream server
- (40) eServiceCenter
- (35) CI Slots
- (35) CA handler
- (30) eActionMap
- (22) Hdmi CEC driver
- (21) input device driver
- (20) DVB-CI UI
- (20) UHF Modulator
- (20) RC Input layer
- (20) misc options
- (20) AVSwitch Driver
- (15) eWindowStyleManager
- (10) gRC
waiting for gRC thread shutdown
gRC thread has finished
- (9) GFBDC
- (9) gLCDDC
- (9) Font Render Class
- (8) graphics acceleration manager
- (5) Tuxtxt
- (1) Background File Eraser
reached rl -1
PYTHONPATH: /usr/lib/enigma2/python
DVB_API_VERSION 5 DVB_API_VERSION_MINOR 10
+ (1) Background File Eraser
+ (5) Tuxtxt
+ (8) graphics acceleration manager
BCM accel interface not available - Operation not permitted
+ (9) GFBDC
10800k video mem
- double buffering available!
3600kB available for acceleration surfaces.
resolution: 1280 x 720 x 32 (stride: 5120)
+ (9) gLCDDC
found OLED display!
lcd buffer 0x7dc078 8448 bytes, stride 132
LCD resolution: 132 x 64 x 8 (stride: 132)
+ (9) Font Render Class
+ (10) gRC
RC thread created successfully
+ (15) eWindowStyleManager
+ (20) DVB-CI UI
+ (20) UHF Modulator
couldnt open /dev/rfmod0!!!!
+ (20) RC Input layer
+ (20) misc options
+ (20) AVSwitch Driver
couldnt open /dev/dbox/fp0 to monitor vcr scart slow blanking changed!
+ (21) input device driver
Input device "dreambox remote control (native)" is a remotecontrol
Input device "dreambox advanced remote control (native)" is a remotecontrol
Found 2 input devices.
+ (22) Hdmi CEC driver
eHdmiCEC: detected physical address change: 1000 --> 3000
eHdmiCEC: send message 84 30 00 01
+ (30) eActionMap
+ (35) CI Slots
scanning for common interfaces..
CI Slot 0 setSource(0)
eDVBCIInterfaces->setInputSource(0, 0)
eDVBCIInterfaces->setInputSource(1, 1)
done, found 1 common interface slots
+ (35) CA handler
+ (40) eServiceCenter
settings instance.
+ (41) eServiceFactoryDVD
+ (41) eServiceFactoryHDMI
+ (41) eServiceFactoryM2TS
+ (41) eServiceFactoryMP3
+ (41) eServiceFactoryFS
+ (41) eServiceFactoryDVB
+ (41) Encoders
+ (41) Stream server
reached rl 70
---- opening lame channel db
reading services (version 4)
loaded 246 channels/transponders and 7063 services
scanning for frontends..
opening frontend 0
close frontend 0
opening frontend 1
close frontend 1
found 1 adapter, 2 frontends(2 sim) and 7 demux, boxtype 3
Use valid Linux Time :) (RTC?)
[EPGC] Initialized EPGCache (wait for setCacheFile call now)
[ePNG] couldn't open /usr/share/enigma2/skin_default/spinner/wait13.png
found 12 spinner!
executing main
setIoPrio best-effort level 3 ok
[HardwareInfo] Scanning hardware info
Detected: et8500 (0.91-150107-14.2)
couldn't open /proc/stb/misc/12V_output
[Harddisk] enumerating block devices...
new Harddisk sda -> /dev/sda -> /dev/sda
SKIN ERROR: {skin_display.xml}: display skin not found. Please contact the skin's author!
defaulting to standard display skin... skin_display.xml
sec config cleared
setSlotInfo for dvb frontend 0 to slotid 0, descr AVL6211, need rotorworkaround No, enabled Yes, DVB-S2 Yes
setSlotInfo for dvb frontend 1 to slotid 1, descr AVL6211, need rotorworkaround No, enabled No, DVB-S2 Yes
slot: 0 configmode: simple
diseqcmode: diseqc_a_b_c_d
slot: 1 configmode: nothing
sec config completed
main thread is non-idle! display spinner!
Renumbering...
libpng warning: iCCP: known incorrect sRGB profile
libpng warning: iCCP: cHRM chunk does not match sRGB
libpng warning: iCCP: known incorrect sRGB profile
libpng warning: iCCP: cHRM chunk does not match sRGB
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropriate ioctl for device >
Activating keymap: Default (US)
[ePopen] command: loadkmap < /usr/share/keymaps/default.kmap
Activating language Deutsch
--> setting scaler_sharpness to: 0000000D
[ePopen] command: ip -o addr show dev eth0
FIXME: request for unknown slot
FIXME: request for unknown slot
FIXME: request for unknown slot
HDMU Center: Import evfd failed
Plugin Extensions/WebInterface failed to load: No module named plugin
Media Center: Import evfd failed
Plugin Extensions/LCD4linux failed to load: No module named simplejson
Traceback (most recent call last):
File "/usr/lib/enigma2/python/Components/PluginComponent.py", line 52, in readPluginList
File "/usr/lib/enigma2/python/Tools/Import.py", line 2, in my_import
File "/usr/lib/enigma2/python/Plugins/Extensions/LCD4linux/plugin.py", line 51, in <module>
import simplejson
ImportError: No module named simplejson
getModeList for port DVI-PC
remove DVI-PC because of not existing modes
getModeList for port YPbPr
getModeList for port Scart
getModeList for port DVI
hotplug on dvi
setMode - port: DVI mode: 1080i rate: multi
starting hotplug handler
[EPGC] setCacheFile read/write epg data from/to '/hdd/epg.dat'
[EPGC] time updated.. start EPG Mainloop
[SKIN] Parsing embedded skin <embedded-in-'Screensaver'>
[EPGC] 8772 events read from /hdd/epg.dat
[SKIN] No skin to read...
warning, skin is missing element From in <class 'Screens.Dish.Dish'>
warning, skin is missing element Goto in <class 'Screens.Dish.Dish'>
warning, skin is missing element tunerName in <class 'Screens.Dish.Dish'>
warning, skin is missing element turnSpeed in <class 'Screens.Dish.Dish'>
warning, skin is missing element posGoto in <class 'Screens.Dish.Dish'>
warning, skin is missing element posFrom in <class 'Screens.Dish.Dish'>
libpng warning: iCCP: known incorrect sRGB profile
warning, skin is missing element turnTime in <class 'Screens.Dish.Dish'>
RemovePopup, id = ZapError
[SKIN] Parsing embedded skin <embedded-in-'InfoBarSummary'>
[SKIN] Parsing embedded skin <embedded-in-'Mute'>
setValue 50
Setvolume: 100 100 (raw)
Setvolume: 0 0 (-1db)
Setvolume: 50 50 (raw)
Setvolume: 32 32 (-1db)
playing 1:0:1:445C:453:1:C00000:0:0:0:
getResolvedKey config.usage.remote_fallback failed !! (Typo??)
not pauseable.
not pauseable.
not pauseable.
RemovePopup, id = ZapError
allocate channel.. 0453:0001
opening frontend 0
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 0 Freq 12544750 Pol 0 SR 22000000 INV 2 FEC 4 orbpos 192 system 0 modulation 1 pilot 2, rolloff 0
tuning to 1944 mhz
OURSTATE: tuning
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:1:445C:453:1:C00000:0:0:0:
allocate demux
cidr invalid: 64
[ePopen] command: route -n | grep eth0
poll: unhandled POLLERR/HUP/NVAL for fd 26(16)
poll: unhandled POLLERR/HUP/NVAL for fd 30(16)
[SEC] set static current limiting
set sequence pos 3
set sequence pos 4
[SEC] setVoltage 1
[SEC] sleep 200ms
0.0.0.0
192.168
nameservers: [[192, 168, 2, 1]]
read configured interface: {'lo': {'dhcp': False}, 'eth0': {'dhcp': False, 'netmask': [255, 255, 255, 0], 'gateway': [192, 168, 2, 1], 'address': [192, 168, 2, 12]}}
self.ifaces after loading: {'eth0': {'preup': False, 'predown': False, 'ip': [192, 168, 2, 12], 'up': True, 'mac': '00:16:b4:06:28:da', 'dhcp': False, 'netmask': [255, 255, 255, 0], 'gateway': [192, 168, 2, 1]}}
AT plugin not found
ER plugin not found
[OpenWebif] no plugins to load
[OpenWebif] started on 80
[OpenWebif] started on 443
poll: unhandled POLLERR/HUP/NVAL for fd 28(16)
Unhandled error in Deferred:
Unhandled Error
Traceback (most recent call last):
File "/usr/lib/python2.7/threading.py", line 524, in __bootstrap
File "/usr/lib/python2.7/threading.py", line 551, in __bootstrap_inner
File "/usr/lib/python2.7/threading.py", line 504, in run
--- <exception caught here> ---
File "/usr/lib/python2.7/site-packages/twisted/python/threadpool.py", line 191, in _worker
File "/usr/lib/python2.7/site-packages/twisted/python/context.py", line 118, in callWithContext
File "/usr/lib/python2.7/site-packages/twisted/python/context.py", line 81, in callWithContext
File "/usr/lib/enigma2/python/Components/Lcd.py", line 54, in JobTask
File "/usr/lib/python2.7/site-packages/usb/legacy.py", line 333, in busses
return (Bus(),)
File "/usr/lib/python2.7/site-packages/usb/legacy.py", line 329, in __init__
self.devices = [Device(d) for d in core.find(find_all=True)]
File "/usr/lib/python2.7/site-packages/usb/core.py", line 846, in find
raise ValueError('No backend available')
exceptions.ValueError: No backend available
[SEC] invalidate current switch params
[SEC] sendDiseqc: e00000(DiSEqC reset)
[SEC] sleep 50ms
[SEC] sendDiseqc: e00003(DiSEqC peripherial power on)
[SEC] sleep 150ms
[SEC] sendDiseqc: e01038f3(?)
[SEC] sleep 50ms
set sequence pos 3
set sequence pos 3
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
[SEC] sleep 500ms
(0)fe event: status 1f, inversion off, m_tuning 2
OURSTATE: ok
[eDVBLocalTimerHandler] channel 0x1c0e540 running
[eEPGCache] channel 0x1c0e540 running
stop release channel timer
eventNewProgramInfo 0 0
have 1 video stream(s) (00ff), and 1 audio stream(s) (0100), and the pcr pid is 00ff, and the text pid is 0020
allocate demux
TuxTxt cache cleared
decoder state: play, vpid=255, apid=256
DMX_SET_PES_FILTER(0xff) - pcr - ok
DEMUX_START - pcr - ok
AUDIO_SET_BYPASS(1) - ok
AUDIO_PAUSE - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 0 - ok
DMX_SET_PES_FILTER(0xff) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
DMX_SET_PES_FILTER(0x20) - ttx - ok
DEMUX_START - ttx - ok
TuxTxt cache cleared
TuxTxt: initialized
TuxTxt service started 20
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
AUDIO_CHANNEL_SELECT(0) - TuxTxt running thread...(020)
ok
disable teletext subtitles page ffffffffffffffff (und)
not pauseable.
not pauseable.
[eDVBCAService] new service 1:0:1:445C:453:1:C00000:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:1:445C:453:1:C00000:0:0:0:
RemovePopup, id = ZapError
[eDVBLocalTimerHandler] diff is 0
[eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
[eDVBLocalTimerHandler] not changed
use pmtpid 0060 for service_id 445c
Plugin Extensions/WebInterface failed to load: No module named plugin
Plugin Extensions/LCD4linux failed to load: No module named simplejson
Traceback (most recent call last):
File "/usr/lib/enigma2/python/Components/PluginComponent.py", line 52, in readPluginList
File "/usr/lib/enigma2/python/Tools/Import.py", line 2, in my_import
File "/usr/lib/enigma2/python/Plugins/Extensions/LCD4linux/plugin.py", line 51, in <module>
import simplejson
ImportError: No module named simplejson
eventNewProgramInfo 0 0
have 1 video stream(s) (00ff), and 2 audio stream(s) (0100, 0103), and the pcr pid is 00ff, and the text pid is 0020
decoder state: play, vpid=255, apid=256
poll: unhandled POLLERR/HUP/NVAL for fd 48(16)
AT plugin not found
ER plugin not found
[OpenWebif] no plugins to load
[OpenWebif] failed to listen on Port 80
[OpenWebif] failed to listen on Port 443
[SEC] set dynamic current limiting
[Dish] tuning failed
[EPGC] start caching events(1422702724)
Während des aufrufen von den Menüs wo ich angesprochen hab.
et8500 login: root Password:
HDMU 13668
Git 1926
[1;31m
# # ###### # # # #
# # # # ## ## # #
# # # # # # # # # #
####### # # # # # # #
# # # # # # # #
# # # # # # # #
# # ###### # # #####
[0;35m+++++++++++++++++: [0;37mSystem Data[0;35m :+++++++++++++++++++
[0;35m+ [0;37mBox [0;35m= [1;32met8500
[0;35m+ [0;37mHDMU Rev [0;35m= [1;32m13668
[0;35m+ [0;37mGIT Rev [0;35m= [1;32m1926
[0;35m+ [0;37mHostname [0;35m= [1;32met8500
[0;35m+ [0;37mKernel [0;35m= [1;32m3.14.21
[0;35m+ [0;37mUptime [0;35m=[1;32m 11:47:04 up 0 min, load average: 0.18, 0.04, 0.01
[0;35m+ [0;37mCPU [0;35m=[1;32m Broadcom BMIPS5000 V1.1 FPU V0.1
[0;35m+[0;37mMemory Total [0;35m= [1;32m310316 kB
[0;35m+ [0;37mMemory Free [0;35m= [1;32m201324 kB
[0m
root@et8500:~# [6n[6n[EPGC] nownext finished(1422701228)
[SKIN] No skin to read...
[SKIN] No skin to read...
[ePNG] couldn't open /usr/share/enigma2/skin_default/HDMUSlim/icons/attention-53.png
[Skin] Error: {skin.xml}: pixmap file /usr/share/enigma2/skin_default/HDMUSlim/icons/attention-53.png not found!. Please contact the skin's author!
[ePNG] couldn't open /usr/share/enigma2/skin_default/HDMUSlim/icons/info-53.png
[Skin] Error: {skin.xml}: pixmap file /usr/share/enigma2/skin_default/HDMUSlim/icons/info-53.png not found!. Please contact the skin's author!
[ePNG] couldn't open /usr/share/enigma2/skin_default/HDMUSlim/icons/question-53.png
[Skin] Error: {skin.xml}: pixmap file /usr/share/enigma2/skin_default/HDMUSlim/icons/question-53.png not found!. Please contact the skin's author!
[SKIN] Parsing embedded skin <embedded-in-'SimpleSummary'>
[EPGC] schedule finished(1422701238)
Unhandled error in Deferred:
Unhandled Error
Traceback (most recent call last):
File "/usr/lib/python2.7/threading.py", line 524, in __bootstrap
File "/usr/lib/python2.7/threading.py", line 551, in __bootstrap_inner
File "/usr/lib/python2.7/threading.py", line 504, in run
--- <exception caught here> ---
File "/usr/lib/python2.7/site-packages/twisted/python/threadpool.py", line 191, in _worker
File "/usr/lib/python2.7/site-packages/twisted/python/context.py", line 118, in callWithContext
File "/usr/lib/python2.7/site-packages/twisted/python/context.py", line 81, in callWithContext
File "/usr/lib/enigma2/python/Components/Lcd.py", line 54, in JobTask
File "/usr/lib/python2.7/site-packages/usb/legacy.py", line 333, in busses
return (Bus(),)
File "/usr/lib/python2.7/site-packages/usb/legacy.py", line 329, in __init__
self.devices = [Device(d) for d in core.find(find_all=True)]
File "/usr/lib/python2.7/site-packages/usb/core.py", line 851, in find
return [d for d in device_iter(k, v)]
File "/usr/lib/python2.7/site-packages/usb/core.py", line 821, in device_iter
for dev in backend.enumerate_devices():
File "/usr/lib/python2.7/site-packages/usb/backend/libusb01.py", line 390, in enumerate_devices
_check(_lib.usb_find_busses())
File "/usr/lib/python2.7/ctypes/__init__.py", line 378, in __getattr__
File "/usr/lib/python2.7/ctypes/__init__.py", line 383, in __getitem__
exceptions.AttributeError: /usr/bin/enigma2: undefined symbol: usb_find_busses
libpng warning: iCCP: known incorrect sRGB profile
libpng warning: iCCP: known incorrect sRGB profile
Unhandled error in Deferred:
Unhandled Error
Traceback (most recent call last):
File "/usr/lib/python2.7/threading.py", line 524, in __bootstrap
File "/usr/lib/python2.7/threading.py", line 551, in __bootstrap_inner
File "/usr/lib/python2.7/threading.py", line 504, in run
--- <exception caught here> ---
File "/usr/lib/python2.7/site-packages/twisted/python/threadpool.py", line 191, in _worker
File "/usr/lib/python2.7/site-packages/twisted/python/context.py", line 118, in callWithContext
File "/usr/lib/python2.7/site-packages/twisted/python/context.py", line 81, in callWithContext
File "/usr/lib/enigma2/python/Components/Lcd.py", line 54, in JobTask
File "/usr/lib/python2.7/site-packages/usb/legacy.py", line 333, in busses
return (Bus(),)
File "/usr/lib/python2.7/site-packages/usb/legacy.py", line 329, in __init__
self.devices = [Device(d) for d in core.find(find_all=True)]
File "/usr/lib/python2.7/site-packages/usb/core.py", line 851, in find
return [d for d in device_iter(k, v)]
File "/usr/lib/python2.7/site-packages/usb/core.py", line 821, in device_iter
for dev in backend.enumerate_devices():
File "/usr/lib/python2.7/site-packages/usb/backend/libusb01.py", line 390, in enumerate_devices
_check(_lib.usb_find_busses())
File "/usr/lib/python2.7/ctypes/__init__.py", line 378, in __getattr__
File "/usr/lib/python2.7/ctypes/__init__.py", line 383, in __getitem__
exceptions.AttributeError: /usr/bin/enigma2: undefined symbol: usb_find_busses
[SKIN] No skin to read...
[SKIN] No skin to read...
warning, skin is missing element description in <class 'Screens.Setup.Setup'>
[SKIN] No skin to read...
Unhandled error in Deferred:
Unhandled Error
Traceback (most recent call last):
File "/usr/lib/python2.7/threading.py", line 524, in __bootstrap
File "/usr/lib/python2.7/threading.py", line 551, in __bootstrap_inner
File "/usr/lib/python2.7/threading.py", line 504, in run
--- <exception caught here> ---
File "/usr/lib/python2.7/site-packages/twisted/python/threadpool.py", line 191, in _worker
File "/usr/lib/python2.7/site-packages/twisted/python/context.py", line 118, in callWithContext
File "/usr/lib/python2.7/site-packages/twisted/python/context.py", line 81, in callWithContext
File "/usr/lib/enigma2/python/Components/Lcd.py", line 54, in JobTask
File "/usr/lib/python2.7/site-packages/usb/legacy.py", line 333, in busses
return (Bus(),)
File "/usr/lib/python2.7/site-packages/usb/legacy.py", line 329, in __init__
self.devices = [Device(d) for d in core.find(find_all=True)]
File "/usr/lib/python2.7/site-packages/usb/core.py", line 851, in find
return [d for d in device_iter(k, v)]
File "/usr/lib/python2.7/site-packages/usb/core.py", line 821, in device_iter
for dev in backend.enumerate_devices():
File "/usr/lib/python2.7/site-packages/usb/backend/libusb01.py", line 390, in enumerate_devices
_check(_lib.usb_find_busses())
File "/usr/lib/python2.7/ctypes/__init__.py", line 378, in __getattr__
File "/usr/lib/python2.7/ctypes/__init__.py", line 383, in __getitem__
exceptions.AttributeError: /usr/bin/enigma2: undefined symbol: usb_find_busses
Startzeit ab Netzschalter 38sec
Ab Neustart 45sec
Umschaltzeiten sind schon mal sehr sehr..... viel besser wie bei ATV,bin ehrlich gesagt schockiert wie schlecht die sind.
Aber egal kommen wir zum Image, der Grund warum man diese Box kauft ist natürlich der Display.
Im Display Menü fehlt die Funktion den live TV abzuschalten.
Einstellung (Power on Diplay) ohne Funktion.
LCD Linux hab jetzt die vom Feed und atv forum getestet beide ohne funktion fehlende Module.
Wenn ich mehr Zeit hab beschäftige ich mich selbt mit dem Problem aber wer´s anschauen will ;)
Hab mal bisschen mitgelogt....
Vom Start
hdmu 4 et8500
et8500 login: root
Password:
Last login: Sat Jan 31 12:11:04 CET 2015 on pts/1
HDMU 13668
Git 1926
[1;31m
# # ###### # # # #
# # # # ## ## # #
# # # # # # # # # #
####### # # # # # # #
# # # # # # # #
# # # # # # # #
# # ###### # # #####
[0;35m+++++++++++++++++: [0;37mSystem Data[0;35m :+++++++++++++++++++
[0;35m+ [0;37mBox [0;35m= [1;32met8500
[0;35m+ [0;37mHDMU Rev [0;35m= [1;32m13668
[0;35m+ [0;37mGIT Rev [0;35m= [1;32m1926
[0;35m+ [0;37mHostname [0;35m= [1;32met8500
[0;35m+ [0;37mKernel [0;35m= [1;32m3.14.21
[0;35m+ [0;37mUptime [0;35m=[1;32m 12:11:47 up 15 min, load average: 0.47, 0.19, 0.10
[0;35m+ [0;37mCPU [0;35m=[1;32m Broadcom BMIPS5000 V1.1 FPU V0.1
[0;35m+[0;37mMemory Total [0;35m= [1;32m310316 kB
[0;35m+ [0;37mMemory Free [0;35m= [1;32m175676 kB
[0m
root@et8500:~# [6n[6n[eDVBCAService] free slot 0 demux 0 for service 1:0:1:445C:453:1:C00000:0:0:0:
[eDVBCAService] free service 1:0:1:445C:453:1:C00000:0:0:0:
decoder state: play, vpid=-1, apid=-1
DEMUX_STOP - pcr - ok
DEMUX_STOP - video - ok
VIDEO_STOP - ok
AUDIO_STOP - ok
DEMUX_STOP - audio - ok
AUDIO_CONTINUE - ok
DEMUX_STOP - ttx - ok
TuxTxt stopped service 20
cleaning up
TuxTxt cache cleared
start release channel timer
[SKIN] Parsing embedded skin <embedded-in-'QuitMainloopScreen'>
[SKIN] Parsing embedded skin <embedded-in-'TryQuitMainloop'>
[SKIN] Parsing embedded skin <embedded-in-'SimpleSummary'>
connectionLost? [Failure instance: Traceback (failure with no frames): <class 'twisted.internet.error.ConnectionLost'>: Connection to the other side was lost in a non-clean fashion: Connection lost.
]
---- saving lame channel db
saved 246 channels and 7063 services!
release cached channel (timer timeout)
[eDVBLocalTimerHandler] remove channel 0x1c0e390
[eEPGCache] remove channel 0x1c0e390
stop release channel timer
[EPGC] store epg to realpath '/media/hdd/epg.dat'
[EPGC] 8772 events written to /hdd/epg.dat
set RTC to previous valid time
close frontend 0
- (41) eServiceFactoryDVD
- (41) eServiceFactoryHDMI
- (41) eServiceFactoryM2TS
- (41) eServiceFactoryMP3
- (41) eServiceFactoryFS
- (41) eServiceFactoryDVB
- (41) Encoders
- (41) Stream server
- (40) eServiceCenter
- (35) CI Slots
- (35) CA handler
- (30) eActionMap
- (22) Hdmi CEC driver
- (21) input device driver
- (20) DVB-CI UI
- (20) UHF Modulator
- (20) RC Input layer
- (20) misc options
- (20) AVSwitch Driver
- (15) eWindowStyleManager
- (10) gRC
waiting for gRC thread shutdown
gRC thread has finished
- (9) GFBDC
- (9) gLCDDC
- (9) Font Render Class
- (8) graphics acceleration manager
- (5) Tuxtxt
- (1) Background File Eraser
reached rl -1
PYTHONPATH: /usr/lib/enigma2/python
DVB_API_VERSION 5 DVB_API_VERSION_MINOR 10
+ (1) Background File Eraser
+ (5) Tuxtxt
+ (8) graphics acceleration manager
BCM accel interface not available - Operation not permitted
+ (9) GFBDC
10800k video mem
- double buffering available!
3600kB available for acceleration surfaces.
resolution: 1280 x 720 x 32 (stride: 5120)
+ (9) gLCDDC
found OLED display!
lcd buffer 0x7dc078 8448 bytes, stride 132
LCD resolution: 132 x 64 x 8 (stride: 132)
+ (9) Font Render Class
+ (10) gRC
RC thread created successfully
+ (15) eWindowStyleManager
+ (20) DVB-CI UI
+ (20) UHF Modulator
couldnt open /dev/rfmod0!!!!
+ (20) RC Input layer
+ (20) misc options
+ (20) AVSwitch Driver
couldnt open /dev/dbox/fp0 to monitor vcr scart slow blanking changed!
+ (21) input device driver
Input device "dreambox remote control (native)" is a remotecontrol
Input device "dreambox advanced remote control (native)" is a remotecontrol
Found 2 input devices.
+ (22) Hdmi CEC driver
eHdmiCEC: detected physical address change: 1000 --> 3000
eHdmiCEC: send message 84 30 00 01
+ (30) eActionMap
+ (35) CI Slots
scanning for common interfaces..
CI Slot 0 setSource(0)
eDVBCIInterfaces->setInputSource(0, 0)
eDVBCIInterfaces->setInputSource(1, 1)
done, found 1 common interface slots
+ (35) CA handler
+ (40) eServiceCenter
settings instance.
+ (41) eServiceFactoryDVD
+ (41) eServiceFactoryHDMI
+ (41) eServiceFactoryM2TS
+ (41) eServiceFactoryMP3
+ (41) eServiceFactoryFS
+ (41) eServiceFactoryDVB
+ (41) Encoders
+ (41) Stream server
reached rl 70
---- opening lame channel db
reading services (version 4)
loaded 246 channels/transponders and 7063 services
scanning for frontends..
opening frontend 0
close frontend 0
opening frontend 1
close frontend 1
found 1 adapter, 2 frontends(2 sim) and 7 demux, boxtype 3
Use valid Linux Time :) (RTC?)
[EPGC] Initialized EPGCache (wait for setCacheFile call now)
[ePNG] couldn't open /usr/share/enigma2/skin_default/spinner/wait13.png
found 12 spinner!
executing main
setIoPrio best-effort level 3 ok
[HardwareInfo] Scanning hardware info
Detected: et8500 (0.91-150107-14.2)
couldn't open /proc/stb/misc/12V_output
[Harddisk] enumerating block devices...
new Harddisk sda -> /dev/sda -> /dev/sda
SKIN ERROR: {skin_display.xml}: display skin not found. Please contact the skin's author!
defaulting to standard display skin... skin_display.xml
sec config cleared
setSlotInfo for dvb frontend 0 to slotid 0, descr AVL6211, need rotorworkaround No, enabled Yes, DVB-S2 Yes
setSlotInfo for dvb frontend 1 to slotid 1, descr AVL6211, need rotorworkaround No, enabled No, DVB-S2 Yes
slot: 0 configmode: simple
diseqcmode: diseqc_a_b_c_d
slot: 1 configmode: nothing
sec config completed
main thread is non-idle! display spinner!
Renumbering...
libpng warning: iCCP: known incorrect sRGB profile
libpng warning: iCCP: cHRM chunk does not match sRGB
libpng warning: iCCP: known incorrect sRGB profile
libpng warning: iCCP: cHRM chunk does not match sRGB
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropriate ioctl for device >
Activating keymap: Default (US)
[ePopen] command: loadkmap < /usr/share/keymaps/default.kmap
Activating language Deutsch
--> setting scaler_sharpness to: 0000000D
[ePopen] command: ip -o addr show dev eth0
FIXME: request for unknown slot
FIXME: request for unknown slot
FIXME: request for unknown slot
HDMU Center: Import evfd failed
Plugin Extensions/WebInterface failed to load: No module named plugin
Media Center: Import evfd failed
Plugin Extensions/LCD4linux failed to load: No module named simplejson
Traceback (most recent call last):
File "/usr/lib/enigma2/python/Components/PluginComponent.py", line 52, in readPluginList
File "/usr/lib/enigma2/python/Tools/Import.py", line 2, in my_import
File "/usr/lib/enigma2/python/Plugins/Extensions/LCD4linux/plugin.py", line 51, in <module>
import simplejson
ImportError: No module named simplejson
getModeList for port DVI-PC
remove DVI-PC because of not existing modes
getModeList for port YPbPr
getModeList for port Scart
getModeList for port DVI
hotplug on dvi
setMode - port: DVI mode: 1080i rate: multi
starting hotplug handler
[EPGC] setCacheFile read/write epg data from/to '/hdd/epg.dat'
[EPGC] time updated.. start EPG Mainloop
[SKIN] Parsing embedded skin <embedded-in-'Screensaver'>
[EPGC] 8772 events read from /hdd/epg.dat
[SKIN] No skin to read...
warning, skin is missing element From in <class 'Screens.Dish.Dish'>
warning, skin is missing element Goto in <class 'Screens.Dish.Dish'>
warning, skin is missing element tunerName in <class 'Screens.Dish.Dish'>
warning, skin is missing element turnSpeed in <class 'Screens.Dish.Dish'>
warning, skin is missing element posGoto in <class 'Screens.Dish.Dish'>
warning, skin is missing element posFrom in <class 'Screens.Dish.Dish'>
libpng warning: iCCP: known incorrect sRGB profile
warning, skin is missing element turnTime in <class 'Screens.Dish.Dish'>
RemovePopup, id = ZapError
[SKIN] Parsing embedded skin <embedded-in-'InfoBarSummary'>
[SKIN] Parsing embedded skin <embedded-in-'Mute'>
setValue 50
Setvolume: 100 100 (raw)
Setvolume: 0 0 (-1db)
Setvolume: 50 50 (raw)
Setvolume: 32 32 (-1db)
playing 1:0:1:445C:453:1:C00000:0:0:0:
getResolvedKey config.usage.remote_fallback failed !! (Typo??)
not pauseable.
not pauseable.
not pauseable.
RemovePopup, id = ZapError
allocate channel.. 0453:0001
opening frontend 0
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 0 Freq 12544750 Pol 0 SR 22000000 INV 2 FEC 4 orbpos 192 system 0 modulation 1 pilot 2, rolloff 0
tuning to 1944 mhz
OURSTATE: tuning
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:1:445C:453:1:C00000:0:0:0:
allocate demux
cidr invalid: 64
[ePopen] command: route -n | grep eth0
poll: unhandled POLLERR/HUP/NVAL for fd 26(16)
poll: unhandled POLLERR/HUP/NVAL for fd 30(16)
[SEC] set static current limiting
set sequence pos 3
set sequence pos 4
[SEC] setVoltage 1
[SEC] sleep 200ms
0.0.0.0
192.168
nameservers: [[192, 168, 2, 1]]
read configured interface: {'lo': {'dhcp': False}, 'eth0': {'dhcp': False, 'netmask': [255, 255, 255, 0], 'gateway': [192, 168, 2, 1], 'address': [192, 168, 2, 12]}}
self.ifaces after loading: {'eth0': {'preup': False, 'predown': False, 'ip': [192, 168, 2, 12], 'up': True, 'mac': '00:16:b4:06:28:da', 'dhcp': False, 'netmask': [255, 255, 255, 0], 'gateway': [192, 168, 2, 1]}}
AT plugin not found
ER plugin not found
[OpenWebif] no plugins to load
[OpenWebif] started on 80
[OpenWebif] started on 443
poll: unhandled POLLERR/HUP/NVAL for fd 28(16)
Unhandled error in Deferred:
Unhandled Error
Traceback (most recent call last):
File "/usr/lib/python2.7/threading.py", line 524, in __bootstrap
File "/usr/lib/python2.7/threading.py", line 551, in __bootstrap_inner
File "/usr/lib/python2.7/threading.py", line 504, in run
--- <exception caught here> ---
File "/usr/lib/python2.7/site-packages/twisted/python/threadpool.py", line 191, in _worker
File "/usr/lib/python2.7/site-packages/twisted/python/context.py", line 118, in callWithContext
File "/usr/lib/python2.7/site-packages/twisted/python/context.py", line 81, in callWithContext
File "/usr/lib/enigma2/python/Components/Lcd.py", line 54, in JobTask
File "/usr/lib/python2.7/site-packages/usb/legacy.py", line 333, in busses
return (Bus(),)
File "/usr/lib/python2.7/site-packages/usb/legacy.py", line 329, in __init__
self.devices = [Device(d) for d in core.find(find_all=True)]
File "/usr/lib/python2.7/site-packages/usb/core.py", line 846, in find
raise ValueError('No backend available')
exceptions.ValueError: No backend available
[SEC] invalidate current switch params
[SEC] sendDiseqc: e00000(DiSEqC reset)
[SEC] sleep 50ms
[SEC] sendDiseqc: e00003(DiSEqC peripherial power on)
[SEC] sleep 150ms
[SEC] sendDiseqc: e01038f3(?)
[SEC] sleep 50ms
set sequence pos 3
set sequence pos 3
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
[SEC] sleep 500ms
(0)fe event: status 1f, inversion off, m_tuning 2
OURSTATE: ok
[eDVBLocalTimerHandler] channel 0x1c0e540 running
[eEPGCache] channel 0x1c0e540 running
stop release channel timer
eventNewProgramInfo 0 0
have 1 video stream(s) (00ff), and 1 audio stream(s) (0100), and the pcr pid is 00ff, and the text pid is 0020
allocate demux
TuxTxt cache cleared
decoder state: play, vpid=255, apid=256
DMX_SET_PES_FILTER(0xff) - pcr - ok
DEMUX_START - pcr - ok
AUDIO_SET_BYPASS(1) - ok
AUDIO_PAUSE - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 0 - ok
DMX_SET_PES_FILTER(0xff) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
DMX_SET_PES_FILTER(0x20) - ttx - ok
DEMUX_START - ttx - ok
TuxTxt cache cleared
TuxTxt: initialized
TuxTxt service started 20
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
AUDIO_CHANNEL_SELECT(0) - TuxTxt running thread...(020)
ok
disable teletext subtitles page ffffffffffffffff (und)
not pauseable.
not pauseable.
[eDVBCAService] new service 1:0:1:445C:453:1:C00000:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:1:445C:453:1:C00000:0:0:0:
RemovePopup, id = ZapError
[eDVBLocalTimerHandler] diff is 0
[eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
[eDVBLocalTimerHandler] not changed
use pmtpid 0060 for service_id 445c
Plugin Extensions/WebInterface failed to load: No module named plugin
Plugin Extensions/LCD4linux failed to load: No module named simplejson
Traceback (most recent call last):
File "/usr/lib/enigma2/python/Components/PluginComponent.py", line 52, in readPluginList
File "/usr/lib/enigma2/python/Tools/Import.py", line 2, in my_import
File "/usr/lib/enigma2/python/Plugins/Extensions/LCD4linux/plugin.py", line 51, in <module>
import simplejson
ImportError: No module named simplejson
eventNewProgramInfo 0 0
have 1 video stream(s) (00ff), and 2 audio stream(s) (0100, 0103), and the pcr pid is 00ff, and the text pid is 0020
decoder state: play, vpid=255, apid=256
poll: unhandled POLLERR/HUP/NVAL for fd 48(16)
AT plugin not found
ER plugin not found
[OpenWebif] no plugins to load
[OpenWebif] failed to listen on Port 80
[OpenWebif] failed to listen on Port 443
[SEC] set dynamic current limiting
[Dish] tuning failed
[EPGC] start caching events(1422702724)
Während des aufrufen von den Menüs wo ich angesprochen hab.
et8500 login: root Password:
HDMU 13668
Git 1926
[1;31m
# # ###### # # # #
# # # # ## ## # #
# # # # # # # # # #
####### # # # # # # #
# # # # # # # #
# # # # # # # #
# # ###### # # #####
[0;35m+++++++++++++++++: [0;37mSystem Data[0;35m :+++++++++++++++++++
[0;35m+ [0;37mBox [0;35m= [1;32met8500
[0;35m+ [0;37mHDMU Rev [0;35m= [1;32m13668
[0;35m+ [0;37mGIT Rev [0;35m= [1;32m1926
[0;35m+ [0;37mHostname [0;35m= [1;32met8500
[0;35m+ [0;37mKernel [0;35m= [1;32m3.14.21
[0;35m+ [0;37mUptime [0;35m=[1;32m 11:47:04 up 0 min, load average: 0.18, 0.04, 0.01
[0;35m+ [0;37mCPU [0;35m=[1;32m Broadcom BMIPS5000 V1.1 FPU V0.1
[0;35m+[0;37mMemory Total [0;35m= [1;32m310316 kB
[0;35m+ [0;37mMemory Free [0;35m= [1;32m201324 kB
[0m
root@et8500:~# [6n[6n[EPGC] nownext finished(1422701228)
[SKIN] No skin to read...
[SKIN] No skin to read...
[ePNG] couldn't open /usr/share/enigma2/skin_default/HDMUSlim/icons/attention-53.png
[Skin] Error: {skin.xml}: pixmap file /usr/share/enigma2/skin_default/HDMUSlim/icons/attention-53.png not found!. Please contact the skin's author!
[ePNG] couldn't open /usr/share/enigma2/skin_default/HDMUSlim/icons/info-53.png
[Skin] Error: {skin.xml}: pixmap file /usr/share/enigma2/skin_default/HDMUSlim/icons/info-53.png not found!. Please contact the skin's author!
[ePNG] couldn't open /usr/share/enigma2/skin_default/HDMUSlim/icons/question-53.png
[Skin] Error: {skin.xml}: pixmap file /usr/share/enigma2/skin_default/HDMUSlim/icons/question-53.png not found!. Please contact the skin's author!
[SKIN] Parsing embedded skin <embedded-in-'SimpleSummary'>
[EPGC] schedule finished(1422701238)
Unhandled error in Deferred:
Unhandled Error
Traceback (most recent call last):
File "/usr/lib/python2.7/threading.py", line 524, in __bootstrap
File "/usr/lib/python2.7/threading.py", line 551, in __bootstrap_inner
File "/usr/lib/python2.7/threading.py", line 504, in run
--- <exception caught here> ---
File "/usr/lib/python2.7/site-packages/twisted/python/threadpool.py", line 191, in _worker
File "/usr/lib/python2.7/site-packages/twisted/python/context.py", line 118, in callWithContext
File "/usr/lib/python2.7/site-packages/twisted/python/context.py", line 81, in callWithContext
File "/usr/lib/enigma2/python/Components/Lcd.py", line 54, in JobTask
File "/usr/lib/python2.7/site-packages/usb/legacy.py", line 333, in busses
return (Bus(),)
File "/usr/lib/python2.7/site-packages/usb/legacy.py", line 329, in __init__
self.devices = [Device(d) for d in core.find(find_all=True)]
File "/usr/lib/python2.7/site-packages/usb/core.py", line 851, in find
return [d for d in device_iter(k, v)]
File "/usr/lib/python2.7/site-packages/usb/core.py", line 821, in device_iter
for dev in backend.enumerate_devices():
File "/usr/lib/python2.7/site-packages/usb/backend/libusb01.py", line 390, in enumerate_devices
_check(_lib.usb_find_busses())
File "/usr/lib/python2.7/ctypes/__init__.py", line 378, in __getattr__
File "/usr/lib/python2.7/ctypes/__init__.py", line 383, in __getitem__
exceptions.AttributeError: /usr/bin/enigma2: undefined symbol: usb_find_busses
libpng warning: iCCP: known incorrect sRGB profile
libpng warning: iCCP: known incorrect sRGB profile
Unhandled error in Deferred:
Unhandled Error
Traceback (most recent call last):
File "/usr/lib/python2.7/threading.py", line 524, in __bootstrap
File "/usr/lib/python2.7/threading.py", line 551, in __bootstrap_inner
File "/usr/lib/python2.7/threading.py", line 504, in run
--- <exception caught here> ---
File "/usr/lib/python2.7/site-packages/twisted/python/threadpool.py", line 191, in _worker
File "/usr/lib/python2.7/site-packages/twisted/python/context.py", line 118, in callWithContext
File "/usr/lib/python2.7/site-packages/twisted/python/context.py", line 81, in callWithContext
File "/usr/lib/enigma2/python/Components/Lcd.py", line 54, in JobTask
File "/usr/lib/python2.7/site-packages/usb/legacy.py", line 333, in busses
return (Bus(),)
File "/usr/lib/python2.7/site-packages/usb/legacy.py", line 329, in __init__
self.devices = [Device(d) for d in core.find(find_all=True)]
File "/usr/lib/python2.7/site-packages/usb/core.py", line 851, in find
return [d for d in device_iter(k, v)]
File "/usr/lib/python2.7/site-packages/usb/core.py", line 821, in device_iter
for dev in backend.enumerate_devices():
File "/usr/lib/python2.7/site-packages/usb/backend/libusb01.py", line 390, in enumerate_devices
_check(_lib.usb_find_busses())
File "/usr/lib/python2.7/ctypes/__init__.py", line 378, in __getattr__
File "/usr/lib/python2.7/ctypes/__init__.py", line 383, in __getitem__
exceptions.AttributeError: /usr/bin/enigma2: undefined symbol: usb_find_busses
[SKIN] No skin to read...
[SKIN] No skin to read...
warning, skin is missing element description in <class 'Screens.Setup.Setup'>
[SKIN] No skin to read...
Unhandled error in Deferred:
Unhandled Error
Traceback (most recent call last):
File "/usr/lib/python2.7/threading.py", line 524, in __bootstrap
File "/usr/lib/python2.7/threading.py", line 551, in __bootstrap_inner
File "/usr/lib/python2.7/threading.py", line 504, in run
--- <exception caught here> ---
File "/usr/lib/python2.7/site-packages/twisted/python/threadpool.py", line 191, in _worker
File "/usr/lib/python2.7/site-packages/twisted/python/context.py", line 118, in callWithContext
File "/usr/lib/python2.7/site-packages/twisted/python/context.py", line 81, in callWithContext
File "/usr/lib/enigma2/python/Components/Lcd.py", line 54, in JobTask
File "/usr/lib/python2.7/site-packages/usb/legacy.py", line 333, in busses
return (Bus(),)
File "/usr/lib/python2.7/site-packages/usb/legacy.py", line 329, in __init__
self.devices = [Device(d) for d in core.find(find_all=True)]
File "/usr/lib/python2.7/site-packages/usb/core.py", line 851, in find
return [d for d in device_iter(k, v)]
File "/usr/lib/python2.7/site-packages/usb/core.py", line 821, in device_iter
for dev in backend.enumerate_devices():
File "/usr/lib/python2.7/site-packages/usb/backend/libusb01.py", line 390, in enumerate_devices
_check(_lib.usb_find_busses())
File "/usr/lib/python2.7/ctypes/__init__.py", line 378, in __getattr__
File "/usr/lib/python2.7/ctypes/__init__.py", line 383, in __getitem__
exceptions.AttributeError: /usr/bin/enigma2: undefined symbol: usb_find_busses