Box in der Boot Schleife

[Herbie17]

Hallo zusammen,

ich habe auf meine Octagon 1008 (AT700) das neue Image vom 03.04. gemacht. Es läuft soweit alles wunderbar, nur wenn ich mein Netzlaufwerk verbinde (nfs) bleibt die Box nach einem Reboot in der Boortschleife hängen.
Habt ihr einen Tipp für mich was das sein kann?

VG
Herbie

[ReWard]

Bitte doch mal darauf achten wo ihr schreibt. Ist das denn so schwierig? Was hat das mit dem Board zu tun?

Wofür haben wir denn den Image Bereich?

[Herbie17]

Oh sorry, du hast Recht.
Kannst Du bitte in den richtigen Bereich verschieben oder soll ich dort einen neuen Thread erstellen?

[ReWard]

Ist doch schon.

Ein log wäre hilfreich.

Stimmt der nfs mount? Gib mal mehr info. Wie sieht Deine auto.network aus?

[Herbie17]

Blode Frage, wie erstelle ich ein Log zu mal die Box ja nicht bootet.

[ReWard]

Steht in der FAQ. Schon mal reinfeschaut? -> klick (http://faqs.hdmedia-universe.com/technisches-rund-ums-image/)

[flac]

Dann stimmt 100% dein Netzwerk Mount nicht.
Der hängt aber nicht ewig in der Bootschleife. Irgendwann gibt die Box auf und fährt hoch.


Gruß

Chris

[Herbie17]

Anbei das Log, was nicht wirklich etwas sagt. Könnt ihr etwas erkennen?


*


Board: STb7200-HDBOX [29-bit mode]




U-Boot 1.3.1 (Apr 28 2010 - 14:35:18) - stm23-0032
---created by TDT for general purpose---


DRAM: 128 MB
Flash: 32 MB
In: serial
Out: serial
Err: serial
init Frontpanel... done, AV700
Hit any key to stop autoboot: 1 0
bootmenu_timeout:2000,default:2
add entry:0 - FLASH
add entry:1 - USB I
add entry:2 - USB II
add entry:3 - USB III
add entry:4 - USB IV
add entry:5 - empty
add entry:6 - empty
add entry:7 - empty
add entry:8 - empty
add entry:9 - E FLASH
entering bootmenu - default:2 - USB II
USB: scanning bus for devices... 2 USB Device(s) found
scanning bus for storage devices... 1 Storage Device(s) found
loading from usb 0:2


1872867 bytes read
## Booting image at a5000000 ...
Image Name: Linux-2.6.32.61_stm24_0215
Image Type: SuperH Linux Kernel Image (gzip compressed)
Data Size: 1872803 Bytes = 1.8 MB
Load Address: 84001000
Entry Point: 84002000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK


Starting kernel console=ttyAS1,115200 root=/dev/sda2 rw mem=128m ip=192.168.14.57:192.168.14.45:192.168.14.2:255.25 5.255.0:AT700:eth0:off coprocessor_mem=4m@0x10000000,4m@0x10400000 rootdelay=5 nwhwconf=device:eth0,hwaddr:12:34:56:AB:CD:EF init=/bin/devinit - 0x00000000 - 0 ...




INIT: version 2.88 booting


init frontpanel
[mountvirtfs] Mount /dev in tmpfs
[mountvirtfs] Copying device nodes to /dev
Starting portmap daemon....
Loading autofs
Starting autofs
[mountall] Mounting local filesystems...
mount: mounting LABEL=RECORD on /hdd failed: No such file or directory
Cleaning /tmp.
Hostname: AT700.
init stmfb
LOADING MODULES
load firmware
copLoadFile (file /boot/audio.elf)
ustslave: Kernel Version: 24
base_address 0x10400000
seeking to 0
seeking to 5f00
seeking to 12320
seeking to 1aa20
seeking to 173100
seeking to 173138
seeking to 173170
seeking to 1b9058
seeking to 1b9060
seeking to 1b9068
seeking to 1b9070
seeking to 1d0920
seeking to 1d0a00
copLoadFile (file /boot/video.elf)
ustslave: Kernel Version: 24
base_address 0x10000000
seeking to 0
seeking to 1277c0
seeking to 1277f8
seeking to 127830
seeking to 14d558
seeking to 14d564
seeking to 14d570
seeking to 17df30
seeking to 180000
init embx
init AVS
Model: 'octagon1008'
vBoxType: 8
Input device name: "TDT RC event driver"
Selected Remote: Fortis RemoteControl
RemoteControl Map:
MENU - 04 - 139
RED - 4B - 398
GREEN - 4A - 399
YELLOW - 49 - 400
BLUE - 48 - 401
EXIT - 1C - 174
TEXT - 0D - 388
EPG - 08 - 365
REWIND - 58 - 168
FASTFORWARD - 5C - 208
PLAY - 55 - 207
PAUSE - 07 - 119
RECORD - 56 - 167
STOP - 54 - 128
STANDBY - 0A - 116
MUTE - 0C - 113
CHANNELUP - 5E - 104
CHANNELDOWN - 5F - 109
VOLUMEUP - 4E - 115
VOLUMEDOWN - 4F - 114
INFO - 06 - 358
OK - 1F - 352
UP - 00 - 103
RIGHT - 02 - 106
DOWN - 01 - 108
LEFT - 03 - 105
BACK - 09 - 158
ZOOM - 0B - 372
VMODE - 0E - 47
RESOLUTION - 0F - 393
TVRADIO - 1A - 378
SLEEP - 1E - 142
OPEN - 40 - 361
FAV - 41 - 364
TIMER - 42 - 362
UPUP - 43 - 414
DOWNDOWN - 44 - 415
NEXT - 4C - 407
LAST - 50 - 412
PIP - 51 - 375
MEDIA - 52 - 226
LIST - 53 - 395
0BUTTON - 10 - 11
1BUTTON - 11 - 2
2BUTTON - 12 - 3
3BUTTON - 13 - 4
4BUTTON - 14 - 5
5BUTTON - 15 - 6
6BUTTON - 16 - 7
7BUTTON - 17 - 8
8BUTTON - 18 - 9
9BUTTON - 19 - 10
Frontpanel Map:
STANDBY - 00 - 116
OK - 06 - 352
MENU - 05 - 139
VOLUMEUP - 03 - 115
VOLUMEDOWN - 04 - 114
CHANNELUP - 01 - 104
CHANNELDOWN - 02 - 109
Supports Long KeyPress: 1
processComplex >
period 10, delay 120
Using period=10 delay=120
[SEM] DOWN
[mountall] Mounting local filesystems...
showSinglePic /boot/bootlogo.mvi
VIDEO_SELECT_SOURCE MEMORY (Success)
VIDEO_PLAY (Success)
VIDEO_CONTINUE: (Success)
VIDEO_CLEAR_BUFFER: (Invalid argument)
NOT deconfiguring network interfaces: network shares still mounted.
Setting up IP spoofing protection: rp_filter.
Configuring network interfaces... ifup: interface lo already configured
ifup: interface eth0 already configured
done.
mount: mounting LABEL=RECORD on /hdd failed: No such file or directory
[set_was_timer_wakeup] no timer aktiv
starting e2->
01.01.2000 00:00:18 camd3: BOXTYPE: dm800


01.01.2000 00:00:18 camd3: LOG: 2


01.01.2000 00:00:18 camd3: UDP_PORT: 20248


01.01.2000 00:00:18 camd3: HTTP_PORT: 9080


01.01.2000 00:00:18 camd3: DNS_CACHE: 60 sec


01.01.2000 00:00:18 camd3: DESCR_DELAY: 0 ms


01.01.2000 00:00:18 camd3: camd3.map not found


01.01.2000 00:00:18 camd3: camd3.ignore not found


01.01.2000 00:00:18 camd3: error parse line #1 in camd3.servers


01.01.2000 00:00:18 camd3: error parse line #4 in camd3.servers


01.01.2000 00:00:18 camd3: camd3.servers: HOST=192.168.14.52 PORT=20248


01.01.2000 00:00:18 camd3: UserDB(server): USER=benutzer3 PASS=benutzer3 SERVICES=all


01.01.2000 00:00:18 camd3: UserDB(add): USER=benutzer1 PASS=password2 FROM=any SERVICES=all


01.01.2000 00:00:18 camd3: /var/keys/pw_start.services not found


01.01.2000 00:00:18 camd3: UserDB(add): USER=benutzer110 PASS=password10 FROM=any SERVICES=all


01.01.2000 00:00:18 camd3: /var/keys/pw_start.services not found


01.01.2000 00:00:18 camd3: UserDB(update): USER=benutzer110 PASS=password10 FROM=any SERVICES=all


01.01.2000 00:00:18 camd3: camd3.keys not found


01.01.2000 00:00:18 camd3: KeyDB: started


01.01.2000 00:00:18 camd3: HTTP: started on port 9080


Simple mixer control 'Analog',0
Simple mixer control 'SPDIF',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback -31 - 31
Mono: Playback 6 [60%] [on]
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback -31 - 31
Mono: Playback 6 [60%] [on]
01.01.2000 00:00:19 camd3: rom120.bin -> No such file or directory


Simple mixer control 'HDMI',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback -31 - 31
Mono: Playback 6 [60%] [on]
PYTHONPATH: /usr/lib/enigma2/python
DVB_API_VERSION 5 DVB_API_VERSION_MINOR 3
mount: mounting LABEL=RECORD on /hdd failed: No such file or directory
01.01.2000 00:00:22 camd3: camd v3.902 - erfolgreich gestartet


< 23.577863> + (1) Background File Eraser
< 23.579397> + (5) Tuxtxt
< 23.580391> + (8) graphics acceleration manager
< 23.586376> STMFB accel interface available


< 23.586697> + (9) GFBDC
< 23.587407> [fb] 15360k total video mem
< 23.587725> 7260k usable video mem
< 23.605499> [FBDC] 5640kB available for acceleration surfaces.
< 23.605881> [FBDC] resolution: 720 x 576 x 32 (stride: 2880)
< 23.606639> + (9) gLCD
< 23.606968> eDBoxLCD::eDBoxLCD >
< 23.609944> Error loading config file!


< 23.610231> LCD resolution: -1 x -1 x 1582726736 (stride: 875900982)
< 23.610464> + (9) Font Render Class
< 23.615549> + (10) gRC
< 23.617677> [gRC] thread created successfully
< 23.617992> + (15) eWindowStyleManager
< 23.618314> + (20) DVB-CI UI
< 23.618592> + (20) RC Input layer
< 23.618855> + (20) misc options
< 23.619113> + (20) AVSwitch Driver
< 23.619430> couldnt open /dev/dbox/fp0 to monitor vcr scart slow blanking changed!
< 23.619734> + (21) input device driver
< 23.622488> Input device "HDMU RC FORTIS" is a remotecontrol
< 23.623156> failed to open /dev/input/event1
< 23.623483> Input device "HDMU RC FORTIS" is a remotecontrol
< 23.624326> failed to open /dev/input/event2
< 23.624863> Input device "HDMU RC FORTIS" is a remotecontrol
< 23.625329> failed to open /dev/input/event3
< 23.625637> Input device "HDMU RC FORTIS" is a mouse
< 23.625990> Found 4 input devices.
< 23.626216> + (22) Hdmi CEC driver
< 23.626670> + (30) eActionMap
< 23.626959> + (35) CI Slots
< 23.627283> [CI] scanning for common interfaces..
< 23.628277> [CI] Slot 0: reset requested
< 23.629580> [CI] Slot 1: reset requested
< 23.630969> [CI] Slot 0 setSource(0)
< 23.632538> [CI] Slot 1 setSource(0)
< 23.634075> [CI] eDVBCIInterfaces->setInputSource(0, 0)
< 23.635354> [CI] eDVBCIInterfaces->setInputSource(1, 1)
< 23.636207> [CI] cannot open /proc/stb/tsmux/input2
< 23.636740> [CI] cannot open /proc/stb/tsmux/input3
< 23.637006> [CI] done, found 2 common interface slots
< 23.637224> + (35) CA handler
< 23.638714> + (40) eServiceCenter
< 23.642947> settings instance.
< 23.643259> + (41) eServiceFactoryDVD
< 23.643681> + (41) eServiceFactoryEPlayer3
< 23.644880> + (41) eServiceFactoryHDMI
< 23.645208> + (41) eServiceFactoryM2TS
< 23.645578> + (41) eServiceFactoryMP3
< 23.646363> + (41) eServiceFactoryFS
< 23.646714> + (41) eServiceFactoryDVB
< 23.647179> + (41) Encoders
< 23.647687> + (41) Stream server
< 23.648645> [SERVERSOCKET] ERROR on bind() (Address already in use)
< 23.649281> reached rl 70
< 23.649749> [eDVBDB] ---- opening lame channel db
< 23.652631> [eDVBDB] reading services (version 4)
< 25.624010> [gRC] main thread is non-idle! display spinner!
< 25.624605> [gRC] no spinner DC!
< 25.757372> [eDVBDB] loaded 246 channels/transponders and 7066 services
< 25.762235> [eDVBResourceManager] scanning for frontends..
< 25.763309> opening frontend 0
< 26.685855> close frontend 0
< 26.687197> [eDVBAdapterLinux] get demux 0
< 26.687535> [eDVBAdapterLinux] get demux 1
< 26.688729> [eDVBResourceManager] boxtype detection via /proc/stb/info not possible. Use fallback via demux count!
< 26.689248> [eDVBResourceManager] found 1 adapter, 1 frontends(1 sim) and 2 demux, boxtype 0
< 26.690033> RTC not ready... wait for transponder time
< 26.691035> [EPGC] Initialized EPGCache (wait for setCacheFile call now)
< 26.767250> [ePNG] couldn't open /usr/local/share/enigma2/skin_default/spinner/wait13.png
< 26.767670> found 12 spinner!


executing main
< 26.768923> setIoPrio best-effort level 3 ok
< 27.627982> [gRC] main thread is non-idle! display spinner!
< 28.970062> Failed to open /dev/dbox/fp0
[HardwareInfo] Scanning hardware info
Detected: octagon1008
[Harddisk] enumerating block devices...
new Harddisk sda -> /dev/sda -> /dev/sda
Reading satellites.xml
sec config cleared
< 36.813409> setSlotInfo for dvb frontend 0 to slotid 0, descr Availink AVL2108 DVB-S2, need rotorworkaround No, enabled Yes, DVB-S2 Yes
slot: 0 configmode: simple
diseqcmode: single
sec config completed


Bitte solche Ausgaben in einer CodeBox posten.

Gruß

Chris

[ReWard]

Bitte eine Code Box nehmen für so was.

Poste mal Deine fstab und auto.network.

[Herbie17]

Jetzt wollte er gar nicht mehr booten, spiele gerade das Image noch mal neu auf und mache meine Einstellungen. Wenn der Fehler wieder auftaucht melde ich mich.

- - - Aktualisiert - - -

habe das Image neu installiert, Kanalliste eingespielt, neu gebootet, über den Netzwerk Browser das Laufwerk verbunden, neu gebootet und jetzt bootet die Box schon gar nicht mehr. Im Display steht abwechselnd Maxiboot, Usb II und das war es...


*

Board: STb7200-HDBOX [29-bit mode]




U-Boot 1.3.1 (Apr 28 2010 - 14:35:18) - stm23-0032
---created by TDT for general purpose---


DRAM: 128 MB
Flash: 32 MB
In: serial
Out: serial
Err: serial
init Frontpanel... done, AV700
Hit any key to stop autoboot: 1  0
bootmenu_timeout:2000,default:2
add entry:0 - FLASH
add entry:1 - USB I
add entry:2 - USB II
add entry:3 - USB III
add entry:4 - USB IV
add entry:5 - empty
add entry:6 - empty
add entry:7 - empty
add entry:8 - empty
add entry:9 - E FLASH
entering bootmenu - default:2 - USB II
USB: scanning bus for devices... 2 USB Device(s) found
scanning bus for storage devices... 1 Storage Device(s) found
loading from usb 0:2


1872867 bytes read
## Booting image at a5000000 ...
Image Name: Linux-2.6.32.61_stm24_0215
Image Type: SuperH Linux Kernel Image (gzip compressed)
Data Size: 1872803 Bytes = 1.8 MB
Load Address: 84001000
Entry Point: 84002000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK


Starting kernel console=ttyAS1,115200 root=/dev/sda2 rw mem=128m ip=192.168.14.57:192.168.14.45:192.168.14.2:255.25 5.255.0:AT700:eth0:off coprocessor_mem=4m@0x10000000,4m@0x10400000 rootdelay=5 nwhwconf=device:eth0,hwaddr:12:34:56:AB:CD:EF init=/bin/devinit - 0x00000000 - 0 ...




INIT: version 2.88 booting


init frontpanel
[mountvirtfs] Mount /dev in tmpfs
[mountvirtfs] Copying device nodes to /dev
Starting portmap daemon....
Loading autofs
Starting autofs
[mountall] Mounting local filesystems...
mount: mounting LABEL=RECORD on /hdd failed: No such file or directory
Cleaning /tmp.
Hostname: AT700.
init stmfb
LOADING MODULES
load firmware
copLoadFile (file /boot/audio.elf)
ustslave: Kernel Version: 24
base_address 0x10400000
seeking to 0
seeking to 5f00
seeking to 12320
seeking to 1aa20
seeking to 173100
seeking to 173138
seeking to 173170
seeking to 1b9058
seeking to 1b9060
seeking to 1b9068
seeking to 1b9070
seeking to 1d0920
seeking to 1d0a00
copLoadFile (file /boot/video.elf)
ustslave: Kernel Version: 24
base_address 0x10000000
seeking to 0
seeking to 1277c0
seeking to 1277f8
seeking to 127830
seeking to 14d558
seeking to 14d564
seeking to 14d570
seeking to 17df30
seeking to 180000
init embx
init AVS
Model: 'octagon1008'
vBoxType: 8
Input device name: "TDT RC event driver"
Selected Remote: Fortis RemoteControl
RemoteControl Map:
MENU - 04 - 139
RED - 4B - 398
GREEN - 4A - 399
YELLOW - 49 - 400
BLUE - 48 - 401
EXIT - 1C - 174
TEXT - 0D - 388
EPG - 08 - 365
REWIND - 58 - 168
FASTFORWARD - 5C - 208
PLAY - 55 - 207
PAUSE - 07 - 119
RECORD - 56 - 167
STOP - 54 - 128
STANDBY - 0A - 116
MUTE - 0C - 113
CHANNELUP - 5E - 104
CHANNELDOWN - 5F - 109
VOLUMEUP - 4E - 115
VOLUMEDOWN - 4F - 114
INFO - 06 - 358
OK - 1F - 352
UP - 00 - 103
RIGHT - 02 - 106
DOWN - 01 - 108
LEFT - 03 - 105
BACK - 09 - 158
ZOOM - 0B - 372
VMODE - 0E - 47
RESOLUTION - 0F - 393
TVRADIO - 1A - 378
SLEEP - 1E - 142
OPEN - 40 - 361
FAV - 41 - 364
TIMER - 42 - 362
UPUP - 43 - 414
DOWNDOWN - 44 - 415
NEXT - 4C - 407
LAST - 50 - 412
PIP - 51 - 375
MEDIA - 52 - 226
LIST - 53 - 395
0BUTTON - 10 - 11
1BUTTON - 11 - 2
2BUTTON - 12 - 3
3BUTTON - 13 - 4
4BUTTON - 14 - 5
5BUTTON - 15 - 6
6BUTTON - 16 - 7
7BUTTON - 17 - 8
8BUTTON - 18 - 9
9BUTTON - 19 - 10
Frontpanel Map:
STANDBY - 00 - 116
OK - 06 - 352
MENU - 05 - 139
VOLUMEUP - 03 - 115
VOLUMEDOWN - 04 - 114
CHANNELUP - 01 - 104
CHANNELDOWN - 02 - 109
Supports Long KeyPress: 1
processComplex >
period 10, delay 120
Using period=10 delay=120
[SEM] DOWN
[mountall] Mounting local filesystems...
showSinglePic /boot/bootlogo.mvi
VIDEO_SELECT_SOURCE MEMORY (Success)
VIDEO_PLAY (Success)
VIDEO_CONTINUE: (Success)
VIDEO_CLEAR_BUFFER: (Invalid argument)
NOT deconfiguring network interfaces: network shares still mounted.
Setting up IP spoofing protection: rp_filter.
Configuring network interfaces... ifup: interface lo already configured
ifup: interface eth0 already configured
done.
mount: mounting LABEL=RECORD on /hdd failed: No such file or directory
[set_was_timer_wakeup] no timer aktiv
starting e2->
01.01.2000 00:00:18 camd3: BOXTYPE: dm800


01.01.2000 00:00:18 camd3: LOG: 2


01.01.2000 00:00:18 camd3: UDP_PORT: 20248


01.01.2000 00:00:18 camd3: HTTP_PORT: 9080


01.01.2000 00:00:18 camd3: DNS_CACHE: 60 sec


01.01.2000 00:00:18 camd3: DESCR_DELAY: 0 ms


01.01.2000 00:00:18 camd3: camd3.map not found


01.01.2000 00:00:18 camd3: camd3.ignore not found


01.01.2000 00:00:18 camd3: error parse line #1 in camd3.servers


01.01.2000 00:00:18 camd3: error parse line #4 in camd3.servers


01.01.2000 00:00:18 camd3: camd3.servers: HOST=192.168.14.52 PORT=20248


01.01.2000 00:00:18 camd3: UserDB(server): USER=benutzer3 PASS=benutzer3 SERVICES=all


01.01.2000 00:00:18 camd3: UserDB(add): USER=benutzer1 PASS=password2 FROM=any SERVICES=all


01.01.2000 00:00:18 camd3: /var/keys/pw_start.services not found


01.01.2000 00:00:18 camd3: UserDB(add): USER=benutzer110 PASS=password10 FROM=any SERVICES=all


01.01.2000 00:00:18 camd3: /var/keys/pw_start.services not found


01.01.2000 00:00:18 camd3: UserDB(update): USER=benutzer110 PASS=password10 FROM=any SERVICES=all


01.01.2000 00:00:18 camd3: camd3.keys not found


01.01.2000 00:00:18 camd3: KeyDB: started


01.01.2000 00:00:18 camd3: HTTP: started on port 9080


Simple mixer control 'Analog',0
Simple mixer control 'SPDIF',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback -31 - 31
Mono: Playback 6 [60%] [on]
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback -31 - 31
Mono: Playback 6 [60%] [on]
01.01.2000 00:00:19 camd3: rom120.bin -> No such file or directory


Simple mixer control 'HDMI',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback -31 - 31
Mono: Playback 6 [60%] [on]
PYTHONPATH: /usr/lib/enigma2/python
DVB_API_VERSION 5 DVB_API_VERSION_MINOR 3
mount: mounting LABEL=RECORD on /hdd failed: No such file or directory
01.01.2000 00:00:22 camd3: camd v3.902 - erfolgreich gestartet


< 23.577863> + (1) Background File Eraser
< 23.579397> + (5) Tuxtxt
< 23.580391> + (8) graphics acceleration manager
< 23.586376> STMFB accel interface available


< 23.586697> + (9) GFBDC
< 23.587407> [fb] 15360k total video mem
< 23.587725> 7260k usable video mem
< 23.605499> [FBDC] 5640kB available for acceleration surfaces.
< 23.605881> [FBDC] resolution: 720 x 576 x 32 (stride: 2880)
< 23.606639> + (9) gLCD
< 23.606968> eDBoxLCD::eDBoxLCD >
< 23.609944> Error loading config file!


< 23.610231> LCD resolution: -1 x -1 x 1582726736 (stride: 875900982)
< 23.610464> + (9) Font Render Class
< 23.615549> + (10) gRC
< 23.617677> [gRC] thread created successfully
< 23.617992> + (15) eWindowStyleManager
< 23.618314> + (20) DVB-CI UI
< 23.618592> + (20) RC Input layer
< 23.618855> + (20) misc options
< 23.619113> + (20) AVSwitch Driver
< 23.619430> couldnt open /dev/dbox/fp0 to monitor vcr scart slow blanking changed!
< 23.619734> + (21) input device driver
< 23.622488> Input device "HDMU RC FORTIS" is a remotecontrol
< 23.623156> failed to open /dev/input/event1
< 23.623483> Input device "HDMU RC FORTIS" is a remotecontrol
< 23.624326> failed to open /dev/input/event2
< 23.624863> Input device "HDMU RC FORTIS" is a remotecontrol
< 23.625329> failed to open /dev/input/event3
< 23.625637> Input device "HDMU RC FORTIS" is a mouse
< 23.625990> Found 4 input devices.
< 23.626216> + (22) Hdmi CEC driver
< 23.626670> + (30) eActionMap
< 23.626959> + (35) CI Slots
< 23.627283> [CI] scanning for common interfaces..
< 23.628277> [CI] Slot 0: reset requested
< 23.629580> [CI] Slot 1: reset requested
< 23.630969> [CI] Slot 0 setSource(0)
< 23.632538> [CI] Slot 1 setSource(0)
< 23.634075> [CI] eDVBCIInterfaces->setInputSource(0, 0)
< 23.635354> [CI] eDVBCIInterfaces->setInputSource(1, 1)
< 23.636207> [CI] cannot open /proc/stb/tsmux/input2
< 23.636740> [CI] cannot open /proc/stb/tsmux/input3
< 23.637006> [CI] done, found 2 common interface slots
< 23.637224> + (35) CA handler
< 23.638714> + (40) eServiceCenter
< 23.642947> settings instance.
< 23.643259> + (41) eServiceFactoryDVD
< 23.643681> + (41) eServiceFactoryEPlayer3
< 23.644880> + (41) eServiceFactoryHDMI
< 23.645208> + (41) eServiceFactoryM2TS
< 23.645578> + (41) eServiceFactoryMP3
< 23.646363> + (41) eServiceFactoryFS
< 23.646714> + (41) eServiceFactoryDVB
< 23.647179> + (41) Encoders
< 23.647687> + (41) Stream server
< 23.648645> [SERVERSOCKET] ERROR on bind() (Address already in use)
< 23.649281> reached rl 70
< 23.649749> [eDVBDB] ---- opening lame channel db
< 23.652631> [eDVBDB] reading services (version 4)
< 25.624010> [gRC] main thread is non-idle! display spinner!
< 25.624605> [gRC] no spinner DC!
< 25.757372> [eDVBDB] loaded 246 channels/transponders and 7066 services
< 25.762235> [eDVBResourceManager] scanning for frontends..
< 25.763309> opening frontend 0
< 26.685855> close frontend 0
< 26.687197> [eDVBAdapterLinux] get demux 0
< 26.687535> [eDVBAdapterLinux] get demux 1
< 26.688729> [eDVBResourceManager] boxtype detection via /proc/stb/info not possible. Use fallback via demux count!
< 26.689248> [eDVBResourceManager] found 1 adapter, 1 frontends(1 sim) and 2 demux, boxtype 0
< 26.690033> RTC not ready... wait for transponder time
< 26.691035> [EPGC] Initialized EPGCache (wait for setCacheFile call now)
< 26.767250> [ePNG] couldn't open /usr/local/share/enigma2/skin_default/spinner/wait13.png
< 26.767670> found 12 spinner!


executing main
< 26.768923> setIoPrio best-effort level 3 ok
< 27.627982> [gRC] main thread is non-idle! display spinner!
< 28.970062> Failed to open /dev/dbox/fp0
[HardwareInfo] Scanning hardware info
Detected: octagon1008
[Harddisk] enumerating block devices...
new Harddisk sda -> /dev/sda -> /dev/sda
Reading satellites.xml
sec config cleared
< 36.813409> setSlotInfo for dvb frontend 0 to slotid 0, descr Availink AVL2108 DVB-S2, need rotorworkaround No, enabled Yes, DVB-S2 Yes
slot: 0 configmode: simple
diseqcmode: single
sec config completed

[bonkel]

hast du für deine softcam ein extra plugin drauf??
lass die mal komplett weg

[Herbie17]

Beim letzten Versuch habe ich keien Softcam installiert.

[Herbie17]

Habe nun auf den USB Stick frische Images installiert. Bei einem Image habe ich die auf meiner UFS910 funktionierende fstab und auto.network raufkopiert mit dem gleichen Ergebnis, &lt;image bleibt hängen. Anbei auch noch mal das Log.<br><br>Habt ihr noch eine Idee?<br><br>
*
<p><br></p>
<p>Board: STb7200-HDBOX [29-bit mode]</p>
<p><br></p>
<p><br></p>
<p>U-Boot 1.3.1 (Apr 28 2010 - 14:35:18) - stm23-0032</p>
<p>---created by TDT for general purpose---</p>
<p><br></p>
<p>DRAM: 128 MB</p>
<p>Flash: 32 MB</p>
<p>In: serial</p>
<p>Out: serial</p>
<p>Err: serial</p>
<p>init Frontpanel... done, AV700</p>
<p>Hit any key to stop autoboot: 1 0 </p>
<p>bootmenu_timeout:2000,default:2</p>
<p>add entry:0 - FLASH</p>
<p>add entry:1 - USB I</p>
<p>add entry:2 - USB II</p>
<p>add entry:3 - USB III</p>
<p>add entry:4 - USB IV</p>
<p>add entry:5 - empty</p>
<p>add entry:6 - empty</p>
<p>add entry:7 - empty</p>
<p>add entry:8 - empty</p>
<p>add entry:9 - E FLASH</p>
<p>entering bootmenu - default:2 - USB II</p>
<p>selected: USB III</p>
<p>selected: USB III</p>
<p>USB: scanning bus for devices... 2 USB Device(s) found</p>
<p> scanning bus for storage devices... 1 Storage Device(s) found</p>
<p>loading from usb 0:3</p>
<p><br></p>
<p>1872867 bytes read</p>
<p>## Booting image at a5000000 ...</p>
<p> Image Name: Linux-2.6.32.61_stm24_0215</p>
<p> Image Type: SuperH Linux Kernel Image (gzip compressed)</p>
<p> Data Size: 1872803 Bytes = 1.8 MB</p>
<p> Load Address: 84001000</p>
<p> Entry Point: 84002000</p>
<p> Verifying Checksum ... OK</p>
<p> Uncompressing Kernel Image ... OK</p>
<p><br></p>
<p>Starting kernel console=ttyAS1,115200 root=/dev/sda3 rw mem=128m ip=192.168.14.57:192.168.14.45:192.168.14.2:255.25 5.255.0:AT700:eth0:off coprocessor_mem=4m@0x10000000,4m@0x10400000 rootdelay=5 nwhwconf=device:eth0,hwaddr:12:34:56:AB:CD:EF init=/bin/devinit - 0x00000000 - 0 ...</p>
<p><br></p>
<p><br></p>
<p>INIT: version 2.88 booting</p>
<p><br></p>
<p>init frontpanel</p>
<p>[mountvirtfs] Mount /dev in tmpfs</p>
<p>[mountvirtfs] Copying device nodes to /dev</p>
<p>Starting portmap daemon....</p>
<p>Loading autofs</p>
<p>Starting autofs</p>
<p>[mountall] Mounting local filesystems...</p>
<p>mount: mounting LABEL=RECORD on /hdd failed: No such file or directory</p>
<p>Cleaning /tmp.</p>
<p>Hostname: AT700.</p>
<p>init stmfb</p>
<p>LOADING MODULES</p>
<p>load firmware</p>
<p>copLoadFile (file /boot/audio.elf)</p>
<p>ustslave: Kernel Version: 24</p>
<p>base_address 0x10400000</p>
<p>seeking to 0</p>
<p>seeking to 5f00</p>
<p>seeking to 12320</p>
<p>seeking to 1aa20</p>
<p>seeking to 173100</p>
<p>seeking to 173138</p>
<p>seeking to 173170</p>
<p>seeking to 1b9058</p>
<p>seeking to 1b9060</p>
<p>seeking to 1b9068</p>
<p>seeking to 1b9070</p>
<p>seeking to 1d0920</p>
<p>seeking to 1d0a00</p>
<p>copLoadFile (file /boot/video.elf)</p>
<p>ustslave: Kernel Version: 24</p>
<p>base_address 0x10000000</p>
<p>seeking to 0</p>
<p>seeking to 1277c0</p>
<p>seeking to 1277f8</p>
<p>seeking to 127830</p>
<p>seeking to 14d558</p>
<p>seeking to 14d564</p>
<p>seeking to 14d570</p>
<p>seeking to 17df30</p>
<p>seeking to 180000</p>
<p>init embx</p>
<p>init AVS</p>
<p>Model: 'octagon1008'</p>
<p>vBoxType: 8</p>
<p>Input device name: "TDT RC event driver"</p>
<p>Selected Remote: Fortis RemoteControl</p>
<p>RemoteControl Map:</p>
<p> MENU - 04 - 139</p>
<p> RED - 4B - 398</p>
<p> GREEN - 4A - 399</p>
<p> YELLOW - 49 - 400</p>
<p> BLUE - 48 - 401</p>
<p> EXIT - 1C - 174</p>
<p> TEXT - 0D - 388</p>
<p> EPG - 08 - 365</p>
<p> REWIND - 58 - 168</p>
<p> FASTFORWARD - 5C - 208</p>
<p> PLAY - 55 - 207</p>
<p> PAUSE - 07 - 119</p>
<p> RECORD - 56 - 167</p>
<p> STOP - 54 - 128</p>
<p> STANDBY - 0A - 116</p>
<p> MUTE - 0C - 113</p>
<p> CHANNELUP - 5E - 104</p>
<p> CHANNELDOWN - 5F - 109</p>
<p> VOLUMEUP - 4E - 115</p>
<p> VOLUMEDOWN - 4F - 114</p>
<p> INFO - 06 - 358</p>
<p> OK - 1F - 352</p>
<p> UP - 00 - 103</p>
<p> RIGHT - 02 - 106</p>
<p> DOWN - 01 - 108</p>
<p> LEFT - 03 - 105</p>
<p> BACK - 09 - 158</p>
<p> ZOOM - 0B - 372</p>
<p> VMODE - 0E - 47</p>
<p> RESOLUTION - 0F - 393</p>
<p> TVRADIO - 1A - 378</p>
<p> SLEEP - 1E - 142</p>
<p> OPEN - 40 - 361</p>
<p> FAV - 41 - 364</p>
<p> TIMER - 42 - 362</p>
<p> UPUP - 43 - 414</p>
<p> DOWNDOWN - 44 - 415</p>
<p> NEXT - 4C - 407</p>
<p> LAST - 50 - 412</p>
<p> PIP - 51 - 375</p>
<p> MEDIA - 52 - 226</p>
<p> LIST - 53 - 395</p>
<p> 0BUTTON - 10 - 11</p>
<p>showSinglePic /boot/bootlogo.mvi</p>
<p>[mountall] Mounting local filesystems...</p>
<p>VIDEO_SELECT_SOURCE MEMORY (Success)</p>
<p>VIDEO_PLAY (Success)</p>
<p>VIDEO_CONTINUE: (Success)</p>
<p>VIDEO_CLEAR_BUFFER: (Invalid argument)</p>
<p> 1BUTTON - 11 - 2</p>
<p> 2BUTTON - 12 - 3</p>
<p> 3BUTTON - 13 - 4</p>
<p> 4BUTTON - 14 - 5</p>
<p> 5BUTTON - 15 - 6</p>
<p> 6BUTTON - 16 - 7</p>
<p> 7BUTTON - 17 - 8</p>
<p> 8BUTTON - 18 - 9</p>
<p> 9BUTTON - 19 - 10</p>
<p>Frontpanel Map:</p>
<p> STANDBY - 00 - 116</p>
<p> OK - 06 - 352</p>
<p> MENU - 05 - 139</p>
<p> VOLUMEUP - 03 - 115</p>
<p> VOLUMEDOWN - 04 - 114</p>
<p> CHANNELUP - 01 - 104</p>
<p> CHANNELDOWN - 02 - 109</p>
<p>Supports Long KeyPress: 1</p>
<p>processComplex &gt;</p>
<p>period 10, delay 120</p>
<p>Using period=10 delay=120</p>
<p>[SEM] DOWN</p>
<p>NOT deconfiguring network interfaces: network shares still mounted.</p>
<p>Setting up IP spoofing protection: rp_filter.</p>
<p>Configuring network interfaces... ifup: interface lo already configured</p>
<p>ifup: interface eth0 already configured</p>
<p>done.</p>
<p>mount: mounting LABEL=RECORD on /hdd failed: No such file or directory</p>
<p>[set_was_timer_wakeup] no timer aktiv</p>
<p>starting e2-&gt;</p>
<p>Simple mixer control 'SPDIF',0</p>
<p> Capabilities: pvolume pvolume-joined pswitch pswitch-joined</p>
<p> Playback channels: Mono</p>
<p>Simple mixer control 'HDMI',0</p>
<p> Capabilities: pvolume pvolume-joined pswitch pswitch-joined</p>
<p> Playback channels: Mono</p>
<p> Limits: Playback -31 - 31</p>
<p> Mono: Playback 6 [60%] [on]</p>
<p> Limits: Playback -31 - 31</p>
<p> Mono: Playback 6 [60%] [on]</p>
<p>Simple mixer control 'Analog',0</p>
<p> Capabilities: pvolume pvolume-joined pswitch pswitch-joined</p>
<p> Playback channels: Mono</p>
<p> Limits: Playback -31 - 31</p>
<p> Mono: Playback 6 [60%] [on]</p>
<p>PYTHONPATH: /usr/lib/enigma2/python</p>
<p>DVB_API_VERSION 5 DVB_API_VERSION_MINOR 3</p>
<p>mount: mounting LABEL=RECORD on /hdd failed: No such file or directory</p>
<p>&lt; 24.087286&gt; + (1) Background File Eraser</p>
<p>&lt; 24.089052&gt; + (5) Tuxtxt</p>
<p>&lt; 24.089620&gt; + (8) graphics acceleration manager</p>
<p>&lt; 24.095617&gt; STMFB accel interface available</p>
<p><br></p>
<p>&lt; 24.095942&gt; + (9) GFBDC</p>
<p>&lt; 24.096645&gt; [fb] 15360k total video mem</p>
<p>&lt; 24.097121&gt; 7260k usable video mem</p>
<p>&lt; 24.114542&gt; [FBDC] 5640kB available for acceleration surfaces.</p>
<p>&lt; 24.114925&gt; [FBDC] resolution: 720 x 576 x 32 (stride: 2880)</p>
<p>&lt; 24.115682&gt; + (9) gLCD</p>
<p>&lt; 24.116010&gt; eDBoxLCD::eDBoxLCD &gt;</p>
<p>&lt; 24.119109&gt; Error loading config file!</p>
<p><br></p>
<p>&lt; 24.119401&gt; LCD resolution: -1 x -1 x 1449031288 (stride: 892612913)</p>
<p>&lt; 24.119675&gt; + (9) Font Render Class</p>
<p>&lt; 24.125272&gt; + (10) gRC</p>
<p>&lt; 24.127168&gt; [gRC] thread created successfully</p>
<p>&lt; 24.127525&gt; + (15) eWindowStyleManager</p>
<p>&lt; 24.127820&gt; + (20) DVB-CI UI</p>
<p>&lt; 24.128126&gt; + (20) RC Input layer</p>
<p>&lt; 24.128391&gt; + (20) misc options</p>
<p>&lt; 24.128613&gt; + (20) AVSwitch Driver</p>
<p>&lt; 24.129639&gt; couldnt open /dev/dbox/fp0 to monitor vcr scart slow blanking changed!</p>
<p>&lt; 24.129967&gt; + (21) input device driver</p>
<p>&lt; 24.131944&gt; Input device "HDMU RC FORTIS" is a remotecontrol</p>
<p>&lt; 24.132782&gt; failed to open /dev/input/event1</p>
<p>&lt; 24.133337&gt; Input device "HDMU RC FORTIS" is a remotecontrol</p>
<p>&lt; 24.133972&gt; failed to open /dev/input/event2</p>
<p>&lt; 24.134325&gt; Input device "HDMU RC FORTIS" is a remotecontrol</p>
<p>&lt; 24.134750&gt; failed to open /dev/input/event3</p>
<p>&lt; 24.135084&gt; Input device "HDMU RC FORTIS" is a mouse</p>
<p>&lt; 24.135410&gt; Found 4 input devices.</p>
<p>&lt; 24.135661&gt; + (22) Hdmi CEC driver</p>
<p>&lt; 24.136089&gt; + (30) eActionMap</p>
<p>&lt; 24.136411&gt; + (35) CI Slots</p>
<p>&lt; 24.136710&gt; [CI] scanning for common interfaces..</p>
<p>&lt; 24.137615&gt; [CI] Slot 0: reset requested</p>
<p>&lt; 24.139386&gt; [CI] Slot 1: reset requested</p>
<p>&lt; 24.141431&gt; [CI] Slot 0 setSource(0)</p>
<p>&lt; 24.142392&gt; [CI] Slot 1 setSource(0)</p>
<p>&lt; 24.143364&gt; [CI] eDVBCIInterfaces-&gt;setInputSource(0, 0)</p>
<p>&lt; 24.144311&gt; [CI] eDVBCIInterfaces-&gt;setInputSource(1, 1)</p>
<p>&lt; 24.145208&gt; [CI] cannot open /proc/stb/tsmux/input2</p>
<p>&lt; 24.145967&gt; [CI] cannot open /proc/stb/tsmux/input3</p>
<p>&lt; 24.146351&gt; [CI] done, found 2 common interface slots</p>
<p>&lt; 24.146569&gt; + (35) CA handler</p>
<p>&lt; 24.148105&gt; + (40) eServiceCenter</p>
<p>&lt; 24.152809&gt; settings instance.</p>
<p>&lt; 24.153266&gt; + (41) eServiceFactoryDVD</p>
<p>&lt; 24.153716&gt; + (41) eServiceFactoryEPlayer3</p>
<p>&lt; 24.154442&gt; + (41) eServiceFactoryHDMI</p>
<p>&lt; 24.154755&gt; + (41) eServiceFactoryM2TS</p>
<p>&lt; 24.155116&gt; + (41) eServiceFactoryMP3</p>
<p>&lt; 24.155887&gt; + (41) eServiceFactoryFS</p>
<p>&lt; 24.156206&gt; + (41) eServiceFactoryDVB</p>
<p>&lt; 24.156689&gt; + (41) Encoders</p>
<p>&lt; 24.157310&gt; + (41) Stream server</p>
<p>&lt; 24.158111&gt; [SERVERSOCKET] ERROR on bind() (Address already in use)</p>
<p>&lt; 24.158740&gt; reached rl 70</p>
<p>&lt; 24.159171&gt; [eDVBDB] ---- opening lame channel db</p>
<p>&lt; 24.162119&gt; [eDVBDB] reading services (version 4)</p>
<p>&lt; 26.133051&gt; [gRC] main thread is non-idle! display spinner!</p>
<p>&lt; 26.133478&gt; [gRC] no spinner DC!</p>
<p>&lt; 26.156284&gt; [eDVBDB] loaded 246 channels/transponders and 7060 services</p>
<p>&lt; 26.161274&gt; [eDVBResourceManager] scanning for frontends..</p>
<p>&lt; 26.162371&gt; opening frontend 0</p>
<p>&lt; 27.086547&gt; close frontend 0</p>
<p>&lt; 27.087892&gt; [eDVBAdapterLinux] get demux 0</p>
<p>&lt; 27.088235&gt; [eDVBAdapterLinux] get demux 1</p>
<p>&lt; 27.089212&gt; [eDVBResourceManager] boxtype detection via /proc/stb/info not possible. Use fallback via demux count!</p>
<p>&lt; 27.089758&gt; [eDVBResourceManager] found 1 adapter, 1 frontends(1 sim) and 2 demux, boxtype 0</p>
<p>&lt; 27.090582&gt; RTC not ready... wait for transponder time</p>
<p>&lt; 27.091499&gt; [EPGC] Initialized EPGCache (wait for setCacheFile call now)</p>
<p>&lt; 27.168032&gt; [ePNG] couldn't open /usr/local/share/enigma2/skin_default/spinner/wait13.png</p>
<p>&lt; 27.168449&gt; found 12 spinner!</p>
<p><br></p>
<p>executing main</p>
<p>&lt; 27.169614&gt; setIoPrio best-effort level 3 ok</p>
<p>&lt; 28.137107&gt; [gRC] main thread is non-idle! display spinner!</p>
<p>&lt; 29.034869&gt; Failed to open /dev/dbox/fp0</p>
<p>[HardwareInfo] Scanning hardware info</p>
<p>Detected: octagon1008</p>
<p>[Harddisk] enumerating block devices...</p>
<p>new Harddisk sda -&gt; /dev/sda -&gt; /dev/sda</p>
<p>Reading satellites.xml</p>
<p>sec config cleared</p>
<p>&lt; 36.803940&gt; setSlotInfo for dvb frontend 0 to slotid 0, descr Availink AVL2108 DVB-S2, need rotorworkaround No, enabled Yes, DVB-S2 Yes</p>
<p>slot: 0 configmode: simple</p>
<p>diseqcmode: single</p>
sec config completed<br>