HDMU_13981_AzboxHD_OE_1982_Flash

[arci]

Hi @bonkel

Test:HDMU_13981_AzboxHD_OE_1982 on AZBox Ultra HD ...

access HTTP WebIf ok ... but Telnet/FTP session doesn't work (not enter) !!!

Test of net ... all ok

Ciao ...

[arci]

Sorry ... :)

But also with second build of today ... issue not solved !!!

Ciao ...

[Claudio Alfatec]

After the update of the day 08/04, I'm not getting connect via FTP and telnet.

[bonkel]

test next image, i enabled ipv6 support, and by default, it is not in kernel (in all azbox)

[macmanolo]

test next image, i enabled ipv6 support, and by default, it is not in kernel (in all azbox)
Dan nehme ich an das man diesmal den kernel mit flashen must oder?

mfg

[arci]

.:: WARNING ::.

Test with last: HDMU_13992_AzboxHD_OE_1984_Flash ... Kernel Check CRC failed

9717
Fortunately that @morly had added check CRC and backup process of old kernel !!!

Test repeated twice !!! ... Warned ...

[ciccio81]

mir wurde in einem anderen forum berichtet das Das image von heute fehlerhaft ist und dass wenn man das image installiert bleibt die box in booting

Könnte man das image entfernen damit nicht weitere Probleme gibt

[arci]

Hi @morly & @bonkel

I think that the problem of the new kernel is due to its greater size than previous ... if it exceeds the area of the partition already initialized to 00h (FFh the rest) ...
I believe that you can not immediatly use the [dd] command for write it ... but you should first initialize (erase) the effective area that will occupy the kernel image !!!

In fact, using the YAMON (pflash write) console to write on the partition /dev/mtdblock4 is need to specify the length of the image file !!!

Unfortunately, for kernel write step you can not handle with the original (Sigma) binary module "update" to AZB (that could to add at Box Tools) ... because at the end of writing procedure it automatically restarts the box ... and of course you can not do a check CRC before !
Unless you have the source code, modify routine (cut off reboot) and recompile it on new linux system environment !!!

Ciao ...

[morly]

thx arci, will check it!!!

[arci]

Hi @morly

I read the message ... and not forgotten!

When I find a bit of time ... we will clarify and also tackle the other features !

Ciao ...

[morly]

thx - would be great
regarding flashing the kernel:


writing '/dev/mtdblock4': No space left on device


the mtd4 part is simply too small for this kernel!



NEWEST IMAGE HDMU_13992:
Kernel: ULK-3.3.1
Kernel size: 6842368 (6.53Mb)

KERNEL PARTITION SIZE:
Disk /dev/ mtdblock4 : 6 MB, 6815744 bytes



cool - the crc and backup function worked great

Und noch auf Deutsch:
der Kernel des neuen HDMU Images (mit ipv6 Support) ist zu gross für die mtd Partition der azboxhd (6842368 (benötigt) vs 6815744(gegeben))
Somit crasht dieses Image die azboxes!!!

Darum gibts auch beim MAT den CRC Check und die Backup-Funktion - somit überlebt die Box!