HDMU_14165_AzboxHD_OE_2345_Flash

[arci]

Hello ... :)

HDMU 14165 AzboxHD OE_23xx (old & new):

Old problem (how in the past) with Kernel config build "Mbus IDE setdma error" & different alignment number of GIT revision on info ...


hdmu 4 azboxhd


azboxhd login: root
Password:
HDMU 14165
Git 2337


# # ###### # # # #
# # # # ## ## # #
# # # # # # # # # #
####### # # # # # # #
# # # # # # # #
# # # # # # # #
# # ###### # # #####


+++++++++++++++++: System Data :+++++++++++++++++++
+ Box = azboxhd
+ HDMU Rev = 14165
+ GIT Rev = 2337
+ Hostname = azboxhd
+ Kernel = 3.3.1-opensat
+ Uptime = 19:37:37 up 3 min, load average: 0.76, 0.47, 0.19
+ CPU = MIPS 4KEc V6.9
+Memory Total = 101856 kB
+ Memory Free = 1860 kB


root@azboxhd:~# dmesg
, fallback to pio
[ 117.070000] MBUS: error previous command is pending (0:4) ...
[ 117.090000] tango2_bmide: fail to setup dma, fallback to pio
[ 117.910000] MBUS: error previous command is pending (0:4) ...
[ 117.910000] tango2_bmide: fail to setup dma, fallback to pio
[ 117.940000] MBUS: error previous command is pending (0:4) ...
[ 117.960000] tango2_bmide: fail to setup dma, fallback to pio
[ 117.990000] MBUS: error previous command is pending (0:4) ...
[ 117.990000] tango2_bmide: fail to setup dma, fallback to pio
[ 118.020000] MBUS: error previous command is pending (0:4) ...
[ 118.040000] tango2_bmide: fail to setup dma, fallback to pio
[ 118.050000] MBUS: error previous command is pending (0:4) ...
[ 118.050000] tango2_bmide: fail to setup dma, fallback to pio
[ 118.070000] MBUS: error previous command is pending (0:4) ...
[ 118.090000] tango2_bmide: fail to setup dma, fallback to pio
[ 118.100000] MBUS: error previous command is pending (0:4) ...
[ 118.100000] tango2_bmide: fail to setup dma, fallback to pio
[ 118.130000] MBUS: error previous command is pending (0:4) ...
[ 118.130000] tango2_bmide: fail to setup dma, fallback to pio
[ 118.710000] MBUS: error previous command is pending (0:4) ...
[ 118.830000] MBUS: error previous command is pending (0:4) ...
[ 118.930000] MBUS: error previous command is pending (0:4) ...
[ 118.930000] tango2_bmide: fail to setup dma, fallback to pio
[ 119.180000] MBUS: error previous command is pending (0:4) ...
[ 119.180000] tango2_bmide: fail to setup dma, fallback to pio
[ 119.400000] MBUS: error previous command is pending (0:4) ...
[ 119.400000] tango2_bmide: fail to setup dma, fallback to pio
[ 119.540000] MBUS: error previous command is pending (0:4) ...
[ 119.550000] tango2_bmide: fail to setup dma, fallback to pio
[ 119.560000] MBUS: error previous command is pending (0:4) ...
[ 119.560000] tango2_bmide: fail to setup dma, fallback to pio
[ 119.780000] MBUS: error previous command is pending (0:4) ...
[ 119.780000] tango2_bmide: fail to setup dma, fallback to pio
[ 119.800000] MBUS: error previous command is pending (0:4) ...
[ 119.820000] tango2_bmide: fail to setup dma, fallback to pio
[ 120.340000] MBUS: error previous command is pending (0:4) ...
[ 120.370000] MBUS: error previous command is pending (0:4) ...
[ 120.440000] MBUS: error previous command is pending (0:4) ...
[ 120.490000] MBUS: error previous command is pending (0:4) ...
[ 120.620000] MBUS: error previous command is pending (0:4) ...
[ 120.620000] tango2_bmide: fail to setup dma, fallback to pio
[ 120.650000] MBUS: error previous command is pending (0:4) ...
[ 120.650000] tango2_bmide: fail to setup dma, fallback to pio
[ 120.660000] MBUS: error previous command is pending (0:4) ...
[ 120.670000] tango2_bmide: fail to setup dma, fallback to pio
[ 120.780000] MBUS: error previous command is pending (0:4) ...
[ 120.780000] tango2_bmide: fail to setup dma, fallback to pio
[ 121.030000] MBUS: error previous command is pending (0:4) ...
[ 121.030000] tango2_bmide: fail to setup dma, fallback to pio
[ 121.080000] MBUS: error previous command is pending (0:4) ...
[ 121.250000] MBUS: error previous command is pending (0:4) ...
[ 121.250000] tango2_bmide: fail to setup dma, fallback to pio
[ 121.830000] MBUS: error previous command is pending (0:4) ...
[ 121.990000] MBUS: error previous command is pending (0:4) ...
[ 121.990000] tango2_bmide: fail to setup dma, fallback to pio
[ 122.090000] MBUS: error previous command is pending (0:4) ...
[ 122.220000] MBUS: error previous command is pending (0:4) ...
[ 122.230000] tango2_bmide: fail to setup dma, fallback to pio
[ 122.470000] MBUS: error previous command is pending (0:4) ...
[ 122.470000] tango2_bmide: fail to setup dma, fallback to pio
[ 122.490000] MBUS: error previous command is pending (0:4) ...
[ 122.510000] MBUS: error previous command is pending (0:4) ...
[ 122.510000] tango2_bmide: fail to setup dma, fallback to pio
[ 122.570000] MBUS: error previous command is pending (0:4) ...
[ 122.730000] MBUS: error previous command is pending (0:4) ...
[ 122.730000] tango2_bmide: fail to setup dma, fallback to pio
[ 122.750000] MBUS: error previous command is pending (0:4) ...
[ 122.760000] tango2_bmide: fail to setup dma, fallback to pio
[ 122.880000] MBUS: error previous command is pending (0:4) ...
[ 122.880000] tango2_bmide: fail to setup dma, fallback to pio
[ 122.900000] MBUS: error previous command is pending (0:4) ...
[ 122.920000] tango2_bmide: fail to setup dma, fallback to pio
[ 123.670000] MBUS: error previous command is pending (0:4) ...
[ 123.670000] tango2_bmide: fail to setup dma, fallback to pio
[ 123.770000] MBUS: error previous command is pending (0:4) ...
[ 123.770000] tango2_bmide: fail to setup dma, fallback to pio
[ 123.810000] MBUS: error previous command is pending (0:4) ...
[ 123.820000] tango2_bmide: fail to setup dma, fallback to pio
[ 123.830000] MBUS: error previous command is pending (0:4) ...
[ 123.840000] tango2_bmide: fail to setup dma, fallback to pio
[ 123.850000] MBUS: error previous command is pending (0:4) ...
[ 123.860000] tango2_bmide: fail to setup dma, fallback to pio
[ 123.880000] MBUS: error previous command is pending (0:4) ...
[ 123.880000] tango2_bmide: fail to setup dma, fallback to pio
[ 124.610000] MBUS: error previous command is pending (0:4) ...
[ 124.610000] tango2_bmide: fail to setup dma, fallback to pio
[ 124.840000] MBUS: error previous command is pending (0:4) ...
[ 124.840000] tango2_bmide: fail to setup dma, fallback to pio
[ 125.060000] MBUS: error previous command is pending (0:4) ...
[ 125.060000] tango2_bmide: fail to setup dma, fallback to pio
[ 125.080000] MBUS: error previous command is pending (0:4) ...
[ 125.090000] tango2_bmide: fail to setup dma, fallback to pio
[ 126.570000] MBUS: error previous command is pending (0:4) ...
[ 126.690000] MBUS: error previous command is pending (0:4) ...
[ 126.690000] tango2_bmide: fail to setup dma, fallback to pio
[ 126.710000] MBUS: error previous command is pending (0:4) ...
[ 126.730000] tango2_bmide: fail to setup dma, fallback to pio
[ 126.740000] MBUS: error previous command is pending (0:4) ...
[ 126.740000] tango2_bmide: fail to setup dma, fallback to pio
[ 126.760000] MBUS: error previous command is pending (0:4) ...
[ 126.780000] tango2_bmide: fail to setup dma, fallback to pio
[ 126.810000] MBUS: error previous command is pending (0:4) ...
[ 126.810000] tango2_bmide: fail to setup dma, fallback to pio
[ 126.840000] MBUS: error previous command is pending (0:4) ...
[ 126.860000] tango2_bmide: fail to setup dma, fallback to pio
[ 126.870000] MBUS: error previous command is pending (0:4) ...
[ 126.890000] tango2_bmide: fail to setup dma, fallback to pio
[ 126.910000] MBUS: error previous command is pending (0:4) ...
[ 126.910000] tango2_bmide: fail to setup dma, fallback to pio
[ 126.940000] MBUS: error previous command is pending (0:4) ...
[ 126.940000] tango2_bmide: fail to setup dma, fallback to pio
[ 126.960000] MBUS: error previous command is pending (0:4) ...
[ 126.960000] tango2_bmide: fail to setup dma, fallback to pio
[ 126.990000] MBUS: error previous command is pending (0:4) ...
[ 126.990000] tango2_bmide: fail to setup dma, fallback to pio
[ 127.470000] SMP863x: AUDIO SET_MIXER
[ 127.480000] SMP863x: AUDIO SET_MIXER
[ 127.500000] MBUS: error previous command is pending (0:4) ...
[ 127.510000] tango2_bmide: fail to setup dma, fallback to pio
[ 127.540000] MBUS: error previous command is pending (0:4) ...
[ 127.540000] tango2_bmide: fail to setup dma, fallback to pio
[ 127.580000] MBUS: error previous command is pending (0:4) ...
[ 127.610000] tango2_bmide: fail to setup dma, fallback to pio
[ 127.640000] MBUS: error previous command is pending (0:4) ...
[ 127.640000] tango2_bmide: fail to setup dma, fallback to pio
[ 127.660000] MBUS: error previous command is pending (0:4) ...
[ 127.680000] tango2_bmide: fail to setup dma, fallback to pio
[ 127.680000] MBUS: error previous command is pending (0:4) ...
[ 127.700000] tango2_bmide: fail to setup dma, fallback to pio
[ 127.810000] MBUS: error previous command is pending (0:4) ...
[ 127.810000] tango2_bmide: fail to setup dma, fallback to pio
[ 127.950000] SMP863x: Source: fe[1] demux[1] ?
[ 128.330000] MBUS: error previous command is pending (0:4) ...
[ 128.340000] MBUS: error previous command is pending (0:4) ...
[ 128.560000] MBUS: error previous command is pending (0:4) ...
[ 128.560000] tango2_bmide: fail to setup dma, fallback to pio
[ 128.570000] MBUS: error previous command is pending (0:4) ...
[ 128.580000] tango2_bmide: fail to setup dma, fallback to pio
[ 129.010000] MBUS: error previous command is pending (0:4) ...
[ 129.010000] tango2_bmide: fail to setup dma, fallback to pio
[ 129.100000] MBUS: error previous command is pending (0:4) ...
[ 129.110000] tango2_bmide: fail to setup dma, fallback to pio
[ 129.720000] MBUS: error previous command is pending (0:4) ...
[ 129.920000] MBUS: error previous command is pending (0:4) ...
[ 129.920000] tango2_bmide: fail to setup dma, fallback to pio
[ 129.950000] MBUS: error previous command is pending (0:4) ...
[ 129.950000] tango2_bmide: fail to setup dma, fallback to pio
[ 129.980000] MBUS: error previous command is pending (0:4) ...
[ 130.000000] tango2_bmide: fail to setup dma, fallback to pio
[ 130.010000] MBUS: error previous command is pending (0:4) ...
[ 130.020000] tango2_bmide: fail to setup dma, fallback to pio
[ 130.060000] MBUS: error previous command is pending (0:4) ...
[ 130.060000] tango2_bmide: fail to setup dma, fallback to pio
[ 130.140000] MBUS: error previous command is pending (0:4) ...
[ 130.150000] tango2_bmide: fail to setup dma, fallback to pio
[ 130.170000] MBUS: error previous command is pending (0:4) ...
[ 130.170000] tango2_bmide: fail to setup dma, fallback to pio
[ 130.230000] MBUS: error previous command is pending (0:4) ...
[ 130.230000] tango2_bmide: fail to setup dma, fallback to pio
[ 130.240000] SMP863x: AUDIO SELECT_SOURCE DEMUX
[ 130.250000] MBUS: error previous command is pending (0:4) ...
[ 130.260000] tango2_bmide: fail to setup dma, fallback to pio
[ 130.290000] MBUS: error previous command is pending (0:4) ...
[ 130.290000] tango2_bmide: fail to setup dma, fallback to pio
[ 130.310000] MBUS: error previous command is pending (0:4) ...
[ 130.320000] tango2_bmide: fail to setup dma, fallback to pio
[ 130.330000] MBUS: error previous command is pending (0:4) ...
[ 130.340000] tango2_bmide: fail to setup dma, fallback to pio
[ 130.360000] MBUS: error previous command is pending (0:4) ...
[ 130.360000] tango2_bmide: fail to setup dma, fallback to pio
[ 130.370000] SMP863x audio: MPEG
[ 130.390000] MBUS: error previous command is pending (0:4) ...
[ 130.390000] tango2_bmide: fail to setup dma, fallback to pio
[ 130.430000] MBUS: error previous command is pending (0:4) ...
[ 130.450000] tango2_bmide: fail to setup dma, fallback to pio
[ 130.470000] MBUS: error previous command is pending (0:4) ...
[ 130.490000] tango2_bmide: fail to setup dma, fallback to pio
[ 130.540000] MBUS: error previous command is pending (0:4) ...
[ 130.540000] tango2_bmide: fail to setup dma, fallback to pio
[ 130.550000] SMP863x: AUDIO PLAY
[ 130.550000] SMP863x: VIDEO SELECT SOURCE DEMUX
[ 130.570000] MBUS: error previous command is pending (0:4) ...
[ 130.570000] tango2_bmide: fail to setup dma, fallback to pio
[ 130.580000] SMP863x: VIDEO SELECT SOURCE DEMUX
[ 130.620000] MBUS: error previous command is pending (0:4) ...
[ 130.620000] tango2_bmide: fail to setup dma, fallback to pio
[ 130.630000] SMP863x video: MPEG2
[ 130.730000] MBUS: error previous command is pending (0:4) ...
[ 130.730000] tango2_bmide: fail to setup dma, fallback to pio
[ 130.760000] SMP863x: VIDEO FREEZE
[ 130.760000] SMP863x: VIDEO PLAY
[ 130.850000] SMP863x: VIDEO SLOWMOTION 0
[ 130.850000] SMP863x: VIDEO FAST FORWARD 0
[ 130.870000] SMP863x: VIDEO CONTINUE
[ 130.880000] GOT first PTS c1da37ff, PTS ---> STC, start playing on Sigma demux1 9303ee80 9303ec80
[ 130.930000] SMP863x STC PLAY
[ 131.390000] MBUS: error previous command is pending (0:4) ...
[ 131.400000] tango2_bmide: fail to setup dma, fallback to pio
[ 131.490000] MBUS: error previous command is pending (0:4) ...
[ 131.500000] tango2_bmide: fail to setup dma, fallback to pio
[ 131.630000] MBUS: error previous command is pending (0:4) ...
[ 131.650000] tango2_bmide: fail to setup dma, fallback to pio
[ 131.730000] MBUS: error previous command is pending (0:4) ...
[ 131.750000] tango2_bmide: fail to setup dma, fallback to pio
[ 131.910000] MBUS: error previous command is pending (0:4) ...
[ 131.920000] tango2_bmide: fail to setup dma, fallback to pio
[ 132.040000] MBUS: error previous command is pending (0:4) ...
[ 132.060000] tango2_bmide: fail to setup dma, fallback to pio
[ 132.180000] MBUS: error previous command is pending (0:4) ...
[ 132.180000] tango2_bmide: fail to setup dma, fallback to pio
[ 132.280000] MBUS: error previous command is pending (0:4) ...
[ 132.290000] tango2_bmide: fail to setup dma, fallback to pio
[ 132.410000] MBUS: error previous command is pending (0:4) ...
[ 132.420000] tango2_bmide: fail to setup dma, fallback to pio
[ 132.490000] MBUS: error previous command is pending (0:4) ...
[ 132.510000] tango2_bmide: fail to setup dma, fallback to pio
[ 132.580000] MBUS: error previous command is pending (0:4) ...
[ 132.590000] tango2_bmide: fail to setup dma, fallback to pio
[ 137.020000] MBUS: error previous command is pending (0:4) ...
[ 137.030000] tango2_bmide: fail to setup dma, fallback to pio
[ 137.070000] MBUS: error previous command is pending (0:4) ...
[ 137.070000] tango2_bmide: fail to setup dma, fallback to pio
[ 170.030000] MBUS: error previous command is pending (0:4) ...
[ 170.030000] tango2_bmide: fail to setup dma, fallback to pio
[ 170.050000] MBUS: error previous command is pending (0:4) ...
[ 170.060000] tango2_bmide: fail to setup dma, fallback to pio
[ 170.090000] MBUS: error previous command is pending (0:4) ...
[ 170.090000] tango2_bmide: fail to setup dma, fallback to pio
[ 170.120000] MBUS: error previous command is pending (0:4) ...
[ 170.130000] tango2_bmide: fail to setup dma, fallback to pio
[ 208.240000] MBUS: error previous command is pending (0:4) ...
[ 211.830000] MBUS: error previous command is pending (0:4) ...
[ 211.830000] tango2_bmide: fail to setup dma, fallback to pio
[ 212.070000] MBUS: error previous command is pending (0:4) ...
[ 212.080000] tango2_bmide: fail to setup dma, fallback to pio
[ 212.290000] MBUS: error previous command is pending (0:4) ...
[ 212.300000] tango2_bmide: fail to setup dma, fallback to pio
[ 215.060000] MBUS: error previous command is pending (0:4) ...
[ 215.120000] MBUS: error previous command is pending (0:4) ...
[ 215.120000] tango2_bmide: fail to setup dma, fallback to pio
[ 215.440000] MBUS: error previous command is pending (0:4) ...
[ 215.440000] tango2_bmide: fail to setup dma, fallback to pio
[ 215.460000] MBUS: error previous command is pending (0:4) ...
[ 215.480000] tango2_bmide: fail to setup dma, fallback to pio
[ 215.500000] MBUS: error previous command is pending (0:4) ...
[ 215.520000] tango2_bmide: fail to setup dma, fallback to pio
[ 215.530000] MBUS: error previous command is pending (0:4) ...
[ 215.550000] tango2_bmide: fail to setup dma, fallback to pio
root@azboxhd:~#




Issue: Most of the time at boot is unable to continue with the regular Enigma2 start !

Ciao ...

[arci]

Hi ...

with new ... HDMU_14166_AzboxHD_OE_2345_Flash

I would say much better ... :)



hdmu 4 azboxhd


azboxhd login: root
Password:
HDMU 14166
Git 2345


# # ###### # # # #
# # # # ## ## # #
# # # # # # # # # #
####### # # # # # # #
# # # # # # # #
# # # # # # # #
# # ###### # # #####


+++++++++++++++++: System Data :+++++++++++++++++++
+ Box = azboxhd
+ HDMU Rev = 14166
+ GIT Rev = 2345
+ Hostname = azboxhd
+ Kernel = 3.3.1-opensat
+ Uptime = 22:27:46 up 2 min, load average: 0.81, 0.38, 0.14
+ CPU = MIPS 4KEc V6.9
+Memory Total = 101856 kB
+ Memory Free = 1872 kB


root@azboxhd:~# dmesg
stered new interface driver usb-storage
[ 2.330000] USB Mass Storage support registered.
[ 2.330000] mousedev: PS/2 mouse device common for all mice
[ 2.340000] lirc_dev: IR Remote Control driver registered, major 253
[ 2.350000] IR NEC protocol handler initialized
[ 2.350000] IR RC5(x) protocol handler initialized
[ 2.360000] IR RC6 protocol handler initialized
[ 2.360000] IR JVC protocol handler initialized
[ 2.370000] IR Sony protocol handler initialized
[ 2.370000] IR RC5 (streamzap) protocol handler initialized
[ 2.380000] IR SANYO protocol handler initialized
[ 2.380000] IR MCE Keyboard/mouse protocol handler initialized
[ 2.390000] IR LIRC bridge handler initialized
[ 2.390000] usbcore: registered new interface driver usbhid
[ 2.400000] usbhid: USB HID core driver
[ 2.410000] ALSA device list:
[ 2.410000] No soundcards found.
[ 2.410000] TCP cubic registered
[ 2.420000] NET: Registered protocol family 10
[ 2.430000] NET: Registered protocol family 17
[ 2.430000] lib80211: common routines for IEEE802.11 drivers
[ 2.440000] lib80211_crypt: registered algorithm 'NULL'
[ 2.440000] Registering the dns_resolver key type
[ 2.550000] Freeing unused kernel memory: 9540k freed
[ 3.950000] irvfd: module license 'unspecified' taints kernel.
[ 3.950000] Disabling lock debugging due to kernel taint
[ 3.960000] MICOM FP starting ...
[ 3.970000] ttyS0: 1 input overrun(s)
[ 3.990000] HDD Detected
[ 3.990000] Forcing RF MOD
[ 4.170000] DETECTED AZBOX ULTRA MODEL?
[ 4.170000] input: dreambox remote control (native) as /devices/virtual/input/input0
[ 9.850000] EXT4-fs (hda1): warning: maximal mount count reached, running e2fsck is recommended
[ 9.860000] ttyS0: 3 input overrun(s)
[ 9.880000] EXT4-fs (hda1): mounted filesystem with ordered data mode. Opts: (null)
[ 10.280000] Algorithmics/MIPS FPU Emulator v1.5
[ 13.150000] EXT4-fs (hda2): warning: mounting unchecked fs, running e2fsck is recommended
[ 13.180000] EXT4-fs (hda2): mounted filesystem without journal. Opts: (null)
[ 13.420000] Adding 16380k swap on /dev/hda3. Priority:-1 extents:1 across:16380k
[ 14.340000] em8xxx [/work/novo/dvb/3.9.2/mrua_SMP8634_20110531T181327_GCC4_facsprod_legacy_ dev.mips.dts/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1703] init_module: begun
[ 14.360000] ttyS0: 1 input overrun(s)
[ 14.380000] em8xxx0 [/work/novo/dvb/3.9.2/mrua_SMP8634_20110531T181327_GCC4_facsprod_legacy_ dev.mips.dts/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1554] identify: board has unknown subid=0x50
[ 14.400000] em8xxx [/work/novo/dvb/3.9.2/mrua_SMP8634_20110531T181327_GCC4_facsprod_legacy_ dev.mips.dts/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1689] identify: device 0x8635 0x86 accepted with software tango2revA
[ 14.600000] em8xxx [/work/novo/dvb/3.9.2/mrua_SMP8634_20110531T181327_GCC4_facsprod_legacy_ dev.mips.dts/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1768] mumk_register_tasklet 0xc807e000
[ 14.620000] mumk_register_tasklet: (0) tasklet c807e000 status @c8cbd754
[ 14.630000] em8xxx [/work/novo/dvb/3.9.2/mrua_SMP8634_20110531T181327_GCC4_facsprod_legacy_ dev.mips.dts/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:403] mumk_register_channel_tasklet[0] 0xc8d3e000: pE=0xc8cbd530 ch_idx=33 module_id=0x3c 0xc8cbd550
[ 14.650000] em8xxx [/work/novo/dvb/3.9.2/mrua_SMP8634_20110531T181327_GCC4_facsprod_legacy_ dev.mips.dts/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:403] mumk_register_channel_tasklet[1] 0xc8d40000: pE=0xc8cbd530 ch_idx=35 module_id=0x3c 0xc8cbd55c
[ 14.670000] em8xxx [/work/novo/dvb/3.9.2/mrua_SMP8634_20110531T181327_GCC4_facsprod_legacy_ dev.mips.dts/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:403] mumk_register_channel_tasklet[2] 0xc8d42000: pE=0xc8cbd530 ch_idx=41 module_id=0x13c 0xc8cbd568
[ 14.700000] em8xxx [/work/novo/dvb/3.9.2/mrua_SMP8634_20110531T181327_GCC4_facsprod_legacy_ dev.mips.dts/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:403] mumk_register_channel_tasklet[3] 0xc8d44000: pE=0xc8cbd530 ch_idx=43 module_id=0x13c 0xc8cbd574
[ 14.720000] em8xxx [/work/novo/dvb/3.9.2/mrua_SMP8634_20110531T181327_GCC4_facsprod_legacy_ dev.mips.dts/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:403] mumk_register_channel_tasklet[4] 0xc8d46000: pE=0xc8cbd530 ch_idx=37 module_id=0x23c 0xc8cbd580
[ 14.740000] em8xxx [/work/novo/dvb/3.9.2/mrua_SMP8634_20110531T181327_GCC4_facsprod_legacy_ dev.mips.dts/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:403] mumk_register_channel_tasklet[5] 0xc8d48000: pE=0xc8cbd530 ch_idx=39 module_id=0x23c 0xc8cbd58c
[ 14.770000] em8xxx [/work/novo/dvb/3.9.2/mrua_SMP8634_20110531T181327_GCC4_facsprod_legacy_ dev.mips.dts/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:403] mumk_register_channel_tasklet[6] 0xc8d4a000: pE=0xc8cbd530 ch_idx=69 module_id=0x3f 0xc8cbd598
[ 14.790000] em8xxx [/work/novo/dvb/3.9.2/mrua_SMP8634_20110531T181327_GCC4_facsprod_legacy_ dev.mips.dts/MRUA_src/rua/emhwlib_kernel/kernel_src/em8xxx_proc.c:849] I found 32 video decoders.
[ 14.810000] em8xxx [/work/novo/dvb/3.9.2/mrua_SMP8634_20110531T181327_GCC4_facsprod_legacy_ dev.mips.dts/MRUA_src/rua/emhwlib_kernel/kernel_src/em8xxx_proc.c:866] I found 4 audio decoders.
[ 14.830000] em8xxx [/work/novo/dvb/3.9.2/mrua_SMP8634_20110531T181327_GCC4_facsprod_legacy_ dev.mips.dts/MRUA_src/rua/emhwlib_kernel/kernel_src/em8xxx_proc.c:883] I found 2 audio capture modules.
[ 14.840000] em8xxx [/work/novo/dvb/3.9.2/mrua_SMP8634_20110531T181327_GCC4_facsprod_legacy_ dev.mips.dts/MRUA_src/rua/emhwlib_kernel/kernel_src/em8xxx_proc.c:900] I found 6 STC.
[ 14.860000] em8xxx [/work/novo/dvb/3.9.2/mrua_SMP8634_20110531T181327_GCC4_facsprod_legacy_ dev.mips.dts/MRUA_src/rua/emhwlib_kernel/kernel_src/em8xxx_proc.c:917] I found 3 demuxs.
[ 14.880000] em8xxx [/work/novo/dvb/3.9.2/mrua_SMP8634_20110531T181327_GCC4_facsprod_legacy_ dev.mips.dts/MRUA_src/rua/emhwlib_kernel/kernel_src/em8xxx_proc.c:935] I found 96 outputs.
[ 14.910000] em8xxx [/work/novo/dvb/3.9.2/mrua_SMP8634_20110531T181327_GCC4_facsprod_legacy_ dev.mips.dts/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1895] init_module: done. Found 1 em8xxx
[ 15.080000] dev 8634 rev 86
[ 16.300000] nimdetect: AZBox NIM detection in progress ...
[ 16.320000] nimdetect: Registering FAKE SMP8634 I2C adapter ...
[ 16.340000] Azbox model ultra
[ 16.340000] ttyS0: 5 input overrun(s)
[ 16.350000] nimdetect: Detecting tuner 0
[ 16.570000] i2c_read_hw: ack error at sub address
[ 16.570000] nimdetect: ReadReg: reg=0x0 (error=-1)
[ 16.580000] i2c_read_hw: ack error at sub address
[ 16.580000] nimdetect: ReadReg: reg=0x7f (error=-1)
[ 16.590000] i2c_read_hw: ack error at sub address
[ 16.590000] nimdetect: ReadReg: reg=0x0 (error=-1)
[ 16.600000] nimdetect: Detecting tuner 1
[ 16.820000] nimdetect: Found DVBS/S2 -> STV0903
[ 16.820000] nimdetect: Attaching (STV6110(A)+STV0903) driver(s) ...
[ 16.940000] azbox_stv6110x_attach: Attaching STV6110x
[ 16.970000] nimdetect: Total detected tuner(s) 1
[ 17.090000] sci0: SMP86xx driver loaded (freq = 3686400, interfaces = 1)
[ 17.140000] sci0: enabled smartcard interface.
[ 17.690000] SMP863x: Loading , build date: Fri Mar 15 22:51:16 CET 2013
[ 17.720000] SMP863x: Allocating DVBAdapter memory
[ 17.740000] SMP863x: RUA Found pllad at 0
[ 17.740000] SMP863x: Setting OUT MOD
[ 17.750000] ttyS0: 4 input overrun(s)
[ 17.770000] SetOutMod: EDID
[ 18.150000] Mode: 74175824, 1920, 540, 2200, 44, 88, 148, 0, 1125, 2, 5, 15, 0, VideoTiming_1920x1080i@59.94Hz, 1
[ 18.170000] Applying output options - HDMI="HDMI_1080i59"[0:0](YCbCr 709), CAV="1080i59"[16:9](YCbCr 709), CVBS="NTSC_M"[16:9](YCbCr 601)
[ 19.340000] Applying output options - HDMI="HDMI_1080p59"[16:9](RGB 16..235), CAV="1080p59"[16:9](YCbCr 709), CVBS="NTSC_M"[16:9](YCbCr 601)
[ 19.860000] Applying output options - HDMI="HDMI_1080p59"[16:9](RGB 16..235), CAV="1080p59"[16:9](YCbCr 709), CVBS="NTSC_M"[16:9](YCbCr 601)
[ 19.870000] ttyS0: 5 input overrun(s)
[ 20.990000] SMP863x: Registering RFMOD char device
[ 21.120000] SMP863x: Registering frameyuv char device
[ 21.140000] SMP863x: Registering vtuner0 char device
[ 21.160000] SMP863x: Registering misc/pvr char device
[ 21.160000] SMP863x: Init DCC
[ 21.170000] ttyS0: 2 input overrun(s)
[ 21.190000] SMP863x: Init Microcode DCC
[ 21.790000] SMP863x: Init GFX
[ 21.800000] SMP863x FB: src_surf 0x16E09664 src_surf_align 0x16E0A000, src_size 8372800, src_align_size 8370340
[ 21.830000] SMP863x: OSD: dst_surf = 27a81398, size = 3686400
[ 21.880000] fb0: SMP863x GFX fb frame buffer device, using 8174K of video memory
[ 21.910000] SMP863x: Registering Sigma DVB Adapter
[ 21.910000] DVB: registering new adapter (SIGMA 863x DVB)
[ 21.940000] SMP863x: Initializing DVB frontend 0...
[ 21.940000] DVB: registering adapter 0 frontend 0 (STV090x Multistandard)...
[ 21.960000] SMP863x: Initializing DVB demux 0...
[ 21.960000] SMP863x: Initializing DVB demux device 0...
[ 21.990000] SMP863x: Initializing DVB demux 1...
[ 22.000000] SMP863x: Initializing DVB demux device 1...
[ 22.010000] SMP863x: Initializing DVB demux 2...
[ 22.060000] SMP863x: Initializing DVB demux device 2...
[ 22.080000] SMP863x: Registering misc/pvr char device
[ 22.200000] SMP863x: Registering Sigma DVB Audio Device
[ 22.210000] SMP863x: Audio open the buffer pools
[ 22.210000] SMP863x: Audio DMA pool id = 0
[ 22.220000] ttyS0: 10 input overrun(s)
[ 22.250000] SMP863x: Registering Sigma DVB Video Device
[ 22.280000] SMP863x: Video open the buffer pools
[ 22.280000] SMP863x: Video DMA pool id = 1
[ 22.310000] SMP863x: Demux[PVR] open the buffer pools
[ 22.310000] SMP863x: Demux[PVR] DMA pool id = 2
[ 22.330000] SMP863x: Demux[VTuner] open the buffer pools
[ 22.330000] SMP863x: Demux[vTuner] DMA pool id = 3
[ 22.350000] SMP863x: Init Sigma Demux Tasks
[ 22.350000] TANGO2_DMX
[ 22.350000] TANGO2_DMX
[ 22.360000] TANGO2_DMX
[ 22.360000] SMP863x: Init Sigma VCXO
[ 22.380000] SMP863x: Registering Sigma DVB CA0 Device
[ 22.390000] SMP863x: Registering Sigma DVB CA1 Device
[ 22.400000] SMP863x: DVB CI init
[ 22.420000] [I2C_SW] RK_i2c_HAL_write RM_TIMEOUT
[ 22.420000]
[ 22.450000] DVB CI init failed
[ 22.490000] SMP863x: start kVcxoRegulate
[ 22.490000] SMP863x: start kMonitorVideo
[ 22.510000] SMP863x: start kTask1
[ 22.510000] SMP863x: start kTask2
[ 22.510000] SMP863x: start kTask3
[ 22.540000] SMP863x: start khdmi
[ 22.580000] SMP863x: ALSA sound driver successfully registered
[ 22.580000] SMP863x: All init done
[ 24.360000] EXT4-fs (hda1): re-mounted. Opts: user_xattr,barrier=1,data=ordered
[ 24.370000] ttyS0: 14 input overrun(s)
[ 26.690000] dvb-usb: found a 'Avermedia AverTV Volar HD & HD PRO (A835)' in warm state.
[ 26.720000] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 26.730000] ttyS0: 2 input overrun(s)
[ 26.750000] DVB: registering new adapter (Avermedia AverTV Volar HD & HD PRO (A835))
[ 26.810000] af9033: firmware version: LINK:11.15.10.0 OFDM:5.48.10.0
[ 26.850000] DVB: registering adapter 1 frontend 0 (Afatech AF9033 DVB-T)...
[ 26.890000] tda18218: NXP TDA18218HN successfully identified.
[ 26.920000] dvb-usb: Avermedia AverTV Volar HD & HD PRO (A835) successfully initialized and connected.
[ 26.970000] usbcore: registered new interface driver dvb_usb_af9035
[ 27.380000] SetOutMod: 720p50
[ 28.270000] Mode: 74250000, 1280, 720, 1980, 400, 80, 220, 0, 750, 5, 5, 20, 0, VideoTiming_1280x720p@50.00Hz, 1
[ 28.280000] Applying output options - HDMI="HDMI_720p50"[0:0](YCbCr 709), CAV="720p50"[16:9](YCbCr 709), CVBS="PAL_BG"[16:9](YCbCr 601)
[ 28.290000] ttyS0: 2 input overrun(s)
[ 29.200000] Applying output options - HDMI="HDMI_720p50"[16:9](RGB 16..235), CAV="720p50"[16:9](YCbCr 709), CVBS="PAL_BG"[16:9](YCbCr 601)
[ 29.720000] Applying output options - HDMI="HDMI_720p50"[16:9](RGB 16..235), CAV="720p50"[16:9](YCbCr 709), CVBS="PAL_BG"[16:9](YCbCr 601)
[ 29.730000] ttyS0: 1 input overrun(s)
[ 31.130000] SMP863x: VIDEO SELECT SOURCE MEMORY
[ 31.150000] SMP863x: VIDEO PLAY
[ 31.160000] SMP863x STC PLAY
[ 31.160000] SMP863x: VIDEO CONTINUE
[ 31.160000] SMP863x: VIDEO CLEAR
[ 31.170000] ttyS0: 2 input overrun(s)
[ 31.190000] SMP863x STC STOP
[ 31.200000] SMP863x: Video new PTS value 0
[ 31.210000] SMP863x STC PLAY
[ 31.380000] SMP863x: VIDEO STOP
[ 31.390000] SMP863x STC STOP
[ 31.390000] SMP863x: VIDEO SELECT SOURCE DEMUX
[ 34.500000] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 38.650000] IOCTL_GET_PARAMETERS
[ 38.670000] IOCTL_SET_PARAMETERS
[ 38.670000] T=0 f=0 EGT=1 ETU=372
[ 39.750000] SMP863x video: MPEG2
[ 39.820000] SMP863x: VIDEO SELECT SOURCE MEMORY
[ 39.850000] SMP863x: VIDEO PLAY
[ 39.860000] SMP863x STC PLAY
[ 39.860000] SMP863x: VIDEO CONTINUE
[ 39.860000] SMP863x: VIDEO CLEAR
[ 39.870000] ttyS0: 1 input overrun(s)
[ 39.910000] SMP863x STC STOP
[ 39.920000] SMP863x: Video new PTS value 0
[ 39.930000] SMP863x STC PLAY
[ 40.100000] SMP863x: VIDEO STOP
[ 40.110000] SMP863x STC STOP
[ 40.110000] SMP863x: VIDEO SELECT SOURCE DEMUX
[ 42.750000] 00000000 00000000
[ 42.750000] ttyS0: 4 input overrun(s)
[ 42.760000] FBIO ACCEL 0
[ 42.760000] 00000000 00000000
[ 42.770000] FBIO ACCEL 2
[ 42.780000] SMP863x manual blit 1
[ 42.790000] New FB OSD resolution [1280:720] , virtual [1280:1440], bpp 32
[ 42.830000] SMP863x: OSD: dst_surf = 24c93834, size = 3686400
[ 42.870000] SMP863x FB PAN: 0 0
[ 44.680000] => vtuner open <=
[ 44.680000] VTUNER_SET_NAME
[ 44.690000] VTUNER_SET_TYPE
[ 44.690000] ttyS0: 3 input overrun(s)
[ 44.700000] DVB: registering adapter 0 frontend 0 (vTuner DVB-T)...
[ 45.090000] eth0: no IPv6 routers present
[ 70.220000] setting 12V off
[ 71.270000] SMP863x: RFNum 36 PwrMode 1 SysMode 1 Sound 0
[ 71.290000] i2c_write_hw: ack error (somewhere during transfer)
[ 71.290000] SMP863x: nim_RF_cmd Fail!!
[ 71.300000] ttyS0: 3 input overrun(s)
[ 71.300000] SMP863x: RFNum 36 PwrMode 1 SysMode 1 Sound 0
[ 71.320000] i2c_write_hw: ack error (somewhere during transfer)
[ 71.330000] SMP863x: nim_RF_cmd Fail!!
[ 71.330000] SMP863x: RFNum 36 PwrMode 1 SysMode 1 Sound 0
[ 71.350000] i2c_write_hw: ack error (somewhere during transfer)
[ 71.360000] SMP863x: nim_RF_cmd Fail!!
[ 71.360000] SMP863x: RFNum 36 PwrMode 1 SysMode 1 Sound 0
[ 71.380000] i2c_write_hw: ack error (somewhere during transfer)
[ 71.390000] SMP863x: nim_RF_cmd Fail!!
[ 71.390000] SMP863x: RFNum 36 PwrMode 1 SysMode 1 Sound 0
[ 71.410000] i2c_write_hw: ack error (somewhere during transfer)
[ 71.420000] SMP863x: nim_RF_cmd Fail!!
[ 90.150000] SMP863x: AUDIO SET_MIXER
[ 90.160000] SMP863x: AUDIO SET_MIXER
[ 90.160000] ttyS0: 2 input overrun(s)
[ 90.450000] SMP863x: Source: fe[0] demux[0] ?
[ 95.750000] SMP863x: AUDIO SELECT_SOURCE DEMUX
[ 95.790000] SMP863x audio: MPEG
[ 95.900000] SMP863x: AUDIO PLAY
[ 95.910000] SMP863x: VIDEO SELECT SOURCE DEMUX
[ 95.910000] SMP863x: VIDEO SELECT SOURCE DEMUX
[ 95.930000] SMP863x video: MPEG2
[ 95.990000] SMP863x: VIDEO FREEZE
[ 96.000000] ttyS0: 2 input overrun(s)
[ 96.000000] SMP863x: VIDEO PLAY
[ 96.040000] SMP863x: VIDEO SLOWMOTION 0
[ 96.050000] SMP863x: VIDEO FAST FORWARD 0
[ 96.050000] SMP863x: VIDEO CONTINUE
[ 96.130000] GOT first PTS fe05b2c7, PTS ---> STC, start playing on Sigma demux0 93df0e80 93df0c80
[ 96.180000] SMP863x STC PLAY
root@azboxhd:~# dmesg
stered new interface driver usb-storage
[ 2.330000] USB Mass Storage support registered.
[ 2.330000] mousedev: PS/2 mouse device common for all mice
[ 2.340000] lirc_dev: IR Remote Control driver registered, major 253
[ 2.350000] IR NEC protocol handler initialized
[ 2.350000] IR RC5(x) protocol handler initialized
[ 2.360000] IR RC6 protocol handler initialized
[ 2.360000] IR JVC protocol handler initialized
[ 2.370000] IR Sony protocol handler initialized
[ 2.370000] IR RC5 (streamzap) protocol handler initialized
[ 2.380000] IR SANYO protocol handler initialized
[ 2.380000] IR MCE Keyboard/mouse protocol handler initialized
[ 2.390000] IR LIRC bridge handler initialized
[ 2.390000] usbcore: registered new interface driver usbhid
[ 2.400000] usbhid: USB HID core driver
[ 2.410000] ALSA device list:
[ 2.410000] No soundcards found.
[ 2.410000] TCP cubic registered
[ 2.420000] NET: Registered protocol family 10
[ 2.430000] NET: Registered protocol family 17
[ 2.430000] lib80211: common routines for IEEE802.11 drivers
[ 2.440000] lib80211_crypt: registered algorithm 'NULL'
[ 2.440000] Registering the dns_resolver key type
[ 2.550000] Freeing unused kernel memory: 9540k freed
[ 3.950000] irvfd: module license 'unspecified' taints kernel.
[ 3.950000] Disabling lock debugging due to kernel taint
[ 3.960000] MICOM FP starting ...
[ 3.970000] ttyS0: 1 input overrun(s)
[ 3.990000] HDD Detected
[ 3.990000] Forcing RF MOD
[ 4.170000] DETECTED AZBOX ULTRA MODEL?
[ 4.170000] input: dreambox remote control (native) as /devices/virtual/input/input0
[ 9.850000] EXT4-fs (hda1): warning: maximal mount count reached, running e2fsck is recommended
[ 9.860000] ttyS0: 3 input overrun(s)
[ 9.880000] EXT4-fs (hda1): mounted filesystem with ordered data mode. Opts: (null)
[ 10.280000] Algorithmics/MIPS FPU Emulator v1.5
[ 13.150000] EXT4-fs (hda2): warning: mounting unchecked fs, running e2fsck is recommended
[ 13.180000] EXT4-fs (hda2): mounted filesystem without journal. Opts: (null)
[ 13.420000] Adding 16380k swap on /dev/hda3. Priority:-1 extents:1 across:16380k
[ 14.340000] em8xxx [/work/novo/dvb/3.9.2/mrua_SMP8634_20110531T181327_GCC4_facsprod_legacy_ dev.mips.dts/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1703] init_module: begun
[ 14.360000] ttyS0: 1 input overrun(s)
[ 14.380000] em8xxx0 [/work/novo/dvb/3.9.2/mrua_SMP8634_20110531T181327_GCC4_facsprod_legacy_ dev.mips.dts/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1554] identify: board has unknown subid=0x50
[ 14.400000] em8xxx [/work/novo/dvb/3.9.2/mrua_SMP8634_20110531T181327_GCC4_facsprod_legacy_ dev.mips.dts/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1689] identify: device 0x8635 0x86 accepted with software tango2revA
[ 14.600000] em8xxx [/work/novo/dvb/3.9.2/mrua_SMP8634_20110531T181327_GCC4_facsprod_legacy_ dev.mips.dts/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1768] mumk_register_tasklet 0xc807e000
[ 14.620000] mumk_register_tasklet: (0) tasklet c807e000 status @c8cbd754
[ 14.630000] em8xxx [/work/novo/dvb/3.9.2/mrua_SMP8634_20110531T181327_GCC4_facsprod_legacy_ dev.mips.dts/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:403] mumk_register_channel_tasklet[0] 0xc8d3e000: pE=0xc8cbd530 ch_idx=33 module_id=0x3c 0xc8cbd550
[ 14.650000] em8xxx [/work/novo/dvb/3.9.2/mrua_SMP8634_20110531T181327_GCC4_facsprod_legacy_ dev.mips.dts/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:403] mumk_register_channel_tasklet[1] 0xc8d40000: pE=0xc8cbd530 ch_idx=35 module_id=0x3c 0xc8cbd55c
[ 14.670000] em8xxx [/work/novo/dvb/3.9.2/mrua_SMP8634_20110531T181327_GCC4_facsprod_legacy_ dev.mips.dts/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:403] mumk_register_channel_tasklet[2] 0xc8d42000: pE=0xc8cbd530 ch_idx=41 module_id=0x13c 0xc8cbd568
[ 14.700000] em8xxx [/work/novo/dvb/3.9.2/mrua_SMP8634_20110531T181327_GCC4_facsprod_legacy_ dev.mips.dts/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:403] mumk_register_channel_tasklet[3] 0xc8d44000: pE=0xc8cbd530 ch_idx=43 module_id=0x13c 0xc8cbd574
[ 14.720000] em8xxx [/work/novo/dvb/3.9.2/mrua_SMP8634_20110531T181327_GCC4_facsprod_legacy_ dev.mips.dts/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:403] mumk_register_channel_tasklet[4] 0xc8d46000: pE=0xc8cbd530 ch_idx=37 module_id=0x23c 0xc8cbd580
[ 14.740000] em8xxx [/work/novo/dvb/3.9.2/mrua_SMP8634_20110531T181327_GCC4_facsprod_legacy_ dev.mips.dts/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:403] mumk_register_channel_tasklet[5] 0xc8d48000: pE=0xc8cbd530 ch_idx=39 module_id=0x23c 0xc8cbd58c
[ 14.770000] em8xxx [/work/novo/dvb/3.9.2/mrua_SMP8634_20110531T181327_GCC4_facsprod_legacy_ dev.mips.dts/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:403] mumk_register_channel_tasklet[6] 0xc8d4a000: pE=0xc8cbd530 ch_idx=69 module_id=0x3f 0xc8cbd598
[ 14.790000] em8xxx [/work/novo/dvb/3.9.2/mrua_SMP8634_20110531T181327_GCC4_facsprod_legacy_ dev.mips.dts/MRUA_src/rua/emhwlib_kernel/kernel_src/em8xxx_proc.c:849] I found 32 video decoders.
[ 14.810000] em8xxx [/work/novo/dvb/3.9.2/mrua_SMP8634_20110531T181327_GCC4_facsprod_legacy_ dev.mips.dts/MRUA_src/rua/emhwlib_kernel/kernel_src/em8xxx_proc.c:866] I found 4 audio decoders.
[ 14.830000] em8xxx [/work/novo/dvb/3.9.2/mrua_SMP8634_20110531T181327_GCC4_facsprod_legacy_ dev.mips.dts/MRUA_src/rua/emhwlib_kernel/kernel_src/em8xxx_proc.c:883] I found 2 audio capture modules.
[ 14.840000] em8xxx [/work/novo/dvb/3.9.2/mrua_SMP8634_20110531T181327_GCC4_facsprod_legacy_ dev.mips.dts/MRUA_src/rua/emhwlib_kernel/kernel_src/em8xxx_proc.c:900] I found 6 STC.
[ 14.860000] em8xxx [/work/novo/dvb/3.9.2/mrua_SMP8634_20110531T181327_GCC4_facsprod_legacy_ dev.mips.dts/MRUA_src/rua/emhwlib_kernel/kernel_src/em8xxx_proc.c:917] I found 3 demuxs.
[ 14.880000] em8xxx [/work/novo/dvb/3.9.2/mrua_SMP8634_20110531T181327_GCC4_facsprod_legacy_ dev.mips.dts/MRUA_src/rua/emhwlib_kernel/kernel_src/em8xxx_proc.c:935] I found 96 outputs.
[ 14.910000] em8xxx [/work/novo/dvb/3.9.2/mrua_SMP8634_20110531T181327_GCC4_facsprod_legacy_ dev.mips.dts/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1895] init_module: done. Found 1 em8xxx
[ 15.080000] dev 8634 rev 86
[ 16.300000] nimdetect: AZBox NIM detection in progress ...
[ 16.320000] nimdetect: Registering FAKE SMP8634 I2C adapter ...
[ 16.340000] Azbox model ultra
[ 16.340000] ttyS0: 5 input overrun(s)
[ 16.350000] nimdetect: Detecting tuner 0
[ 16.570000] i2c_read_hw: ack error at sub address
[ 16.570000] nimdetect: ReadReg: reg=0x0 (error=-1)
[ 16.580000] i2c_read_hw: ack error at sub address
[ 16.580000] nimdetect: ReadReg: reg=0x7f (error=-1)
[ 16.590000] i2c_read_hw: ack error at sub address
[ 16.590000] nimdetect: ReadReg: reg=0x0 (error=-1)
[ 16.600000] nimdetect: Detecting tuner 1
[ 16.820000] nimdetect: Found DVBS/S2 -> STV0903
[ 16.820000] nimdetect: Attaching (STV6110(A)+STV0903) driver(s) ...
[ 16.940000] azbox_stv6110x_attach: Attaching STV6110x
[ 16.970000] nimdetect: Total detected tuner(s) 1
[ 17.090000] sci0: SMP86xx driver loaded (freq = 3686400, interfaces = 1)
[ 17.140000] sci0: enabled smartcard interface.
[ 17.690000] SMP863x: Loading , build date: Fri Mar 15 22:51:16 CET 2013
[ 17.720000] SMP863x: Allocating DVBAdapter memory
[ 17.740000] SMP863x: RUA Found pllad at 0
[ 17.740000] SMP863x: Setting OUT MOD
[ 17.750000] ttyS0: 4 input overrun(s)
[ 17.770000] SetOutMod: EDID
[ 18.150000] Mode: 74175824, 1920, 540, 2200, 44, 88, 148, 0, 1125, 2, 5, 15, 0, VideoTiming_1920x1080i@59.94Hz, 1
[ 18.170000] Applying output options - HDMI="HDMI_1080i59"[0:0](YCbCr 709), CAV="1080i59"[16:9](YCbCr 709), CVBS="NTSC_M"[16:9](YCbCr 601)
[ 19.340000] Applying output options - HDMI="HDMI_1080p59"[16:9](RGB 16..235), CAV="1080p59"[16:9](YCbCr 709), CVBS="NTSC_M"[16:9](YCbCr 601)
[ 19.860000] Applying output options - HDMI="HDMI_1080p59"[16:9](RGB 16..235), CAV="1080p59"[16:9](YCbCr 709), CVBS="NTSC_M"[16:9](YCbCr 601)
[ 19.870000] ttyS0: 5 input overrun(s)
[ 20.990000] SMP863x: Registering RFMOD char device
[ 21.120000] SMP863x: Registering frameyuv char device
[ 21.140000] SMP863x: Registering vtuner0 char device
[ 21.160000] SMP863x: Registering misc/pvr char device
[ 21.160000] SMP863x: Init DCC
[ 21.170000] ttyS0: 2 input overrun(s)
[ 21.190000] SMP863x: Init Microcode DCC
[ 21.790000] SMP863x: Init GFX
[ 21.800000] SMP863x FB: src_surf 0x16E09664 src_surf_align 0x16E0A000, src_size 8372800, src_align_size 8370340
[ 21.830000] SMP863x: OSD: dst_surf = 27a81398, size = 3686400
[ 21.880000] fb0: SMP863x GFX fb frame buffer device, using 8174K of video memory
[ 21.910000] SMP863x: Registering Sigma DVB Adapter
[ 21.910000] DVB: registering new adapter (SIGMA 863x DVB)
[ 21.940000] SMP863x: Initializing DVB frontend 0...
[ 21.940000] DVB: registering adapter 0 frontend 0 (STV090x Multistandard)...
[ 21.960000] SMP863x: Initializing DVB demux 0...
[ 21.960000] SMP863x: Initializing DVB demux device 0...
[ 21.990000] SMP863x: Initializing DVB demux 1...
[ 22.000000] SMP863x: Initializing DVB demux device 1...
[ 22.010000] SMP863x: Initializing DVB demux 2...
[ 22.060000] SMP863x: Initializing DVB demux device 2...
[ 22.080000] SMP863x: Registering misc/pvr char device
[ 22.200000] SMP863x: Registering Sigma DVB Audio Device
[ 22.210000] SMP863x: Audio open the buffer pools
[ 22.210000] SMP863x: Audio DMA pool id = 0
[ 22.220000] ttyS0: 10 input overrun(s)
[ 22.250000] SMP863x: Registering Sigma DVB Video Device
[ 22.280000] SMP863x: Video open the buffer pools
[ 22.280000] SMP863x: Video DMA pool id = 1
[ 22.310000] SMP863x: Demux[PVR] open the buffer pools
[ 22.310000] SMP863x: Demux[PVR] DMA pool id = 2
[ 22.330000] SMP863x: Demux[VTuner] open the buffer pools
[ 22.330000] SMP863x: Demux[vTuner] DMA pool id = 3
[ 22.350000] SMP863x: Init Sigma Demux Tasks
[ 22.350000] TANGO2_DMX
[ 22.350000] TANGO2_DMX
[ 22.360000] TANGO2_DMX
[ 22.360000] SMP863x: Init Sigma VCXO
[ 22.380000] SMP863x: Registering Sigma DVB CA0 Device
[ 22.390000] SMP863x: Registering Sigma DVB CA1 Device
[ 22.400000] SMP863x: DVB CI init
[ 22.420000] [I2C_SW] RK_i2c_HAL_write RM_TIMEOUT
[ 22.420000]
[ 22.450000] DVB CI init failed
[ 22.490000] SMP863x: start kVcxoRegulate
[ 22.490000] SMP863x: start kMonitorVideo
[ 22.510000] SMP863x: start kTask1
[ 22.510000] SMP863x: start kTask2
[ 22.510000] SMP863x: start kTask3
[ 22.540000] SMP863x: start khdmi
[ 22.580000] SMP863x: ALSA sound driver successfully registered
[ 22.580000] SMP863x: All init done
[ 24.360000] EXT4-fs (hda1): re-mounted. Opts: user_xattr,barrier=1,data=ordered
[ 24.370000] ttyS0: 14 input overrun(s)
[ 26.690000] dvb-usb: found a 'Avermedia AverTV Volar HD & HD PRO (A835)' in warm state.
[ 26.720000] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 26.730000] ttyS0: 2 input overrun(s)
[ 26.750000] DVB: registering new adapter (Avermedia AverTV Volar HD & HD PRO (A835))
[ 26.810000] af9033: firmware version: LINK:11.15.10.0 OFDM:5.48.10.0
[ 26.850000] DVB: registering adapter 1 frontend 0 (Afatech AF9033 DVB-T)...
[ 26.890000] tda18218: NXP TDA18218HN successfully identified.
[ 26.920000] dvb-usb: Avermedia AverTV Volar HD & HD PRO (A835) successfully initialized and connected.
[ 26.970000] usbcore: registered new interface driver dvb_usb_af9035
[ 27.380000] SetOutMod: 720p50
[ 28.270000] Mode: 74250000, 1280, 720, 1980, 400, 80, 220, 0, 750, 5, 5, 20, 0, VideoTiming_1280x720p@50.00Hz, 1
[ 28.280000] Applying output options - HDMI="HDMI_720p50"[0:0](YCbCr 709), CAV="720p50"[16:9](YCbCr 709), CVBS="PAL_BG"[16:9](YCbCr 601)
[ 28.290000] ttyS0: 2 input overrun(s)
[ 29.200000] Applying output options - HDMI="HDMI_720p50"[16:9](RGB 16..235), CAV="720p50"[16:9](YCbCr 709), CVBS="PAL_BG"[16:9](YCbCr 601)
[ 29.720000] Applying output options - HDMI="HDMI_720p50"[16:9](RGB 16..235), CAV="720p50"[16:9](YCbCr 709), CVBS="PAL_BG"[16:9](YCbCr 601)
[ 29.730000] ttyS0: 1 input overrun(s)
[ 31.130000] SMP863x: VIDEO SELECT SOURCE MEMORY
[ 31.150000] SMP863x: VIDEO PLAY
[ 31.160000] SMP863x STC PLAY
[ 31.160000] SMP863x: VIDEO CONTINUE
[ 31.160000] SMP863x: VIDEO CLEAR
[ 31.170000] ttyS0: 2 input overrun(s)
[ 31.190000] SMP863x STC STOP
[ 31.200000] SMP863x: Video new PTS value 0
[ 31.210000] SMP863x STC PLAY
[ 31.380000] SMP863x: VIDEO STOP
[ 31.390000] SMP863x STC STOP
[ 31.390000] SMP863x: VIDEO SELECT SOURCE DEMUX
[ 34.500000] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 38.650000] IOCTL_GET_PARAMETERS
[ 38.670000] IOCTL_SET_PARAMETERS
[ 38.670000] T=0 f=0 EGT=1 ETU=372
[ 39.750000] SMP863x video: MPEG2
[ 39.820000] SMP863x: VIDEO SELECT SOURCE MEMORY
[ 39.850000] SMP863x: VIDEO PLAY
[ 39.860000] SMP863x STC PLAY
[ 39.860000] SMP863x: VIDEO CONTINUE
[ 39.860000] SMP863x: VIDEO CLEAR
[ 39.870000] ttyS0: 1 input overrun(s)
[ 39.910000] SMP863x STC STOP
[ 39.920000] SMP863x: Video new PTS value 0
[ 39.930000] SMP863x STC PLAY
[ 40.100000] SMP863x: VIDEO STOP
[ 40.110000] SMP863x STC STOP
[ 40.110000] SMP863x: VIDEO SELECT SOURCE DEMUX
[ 42.750000] 00000000 00000000
[ 42.750000] ttyS0: 4 input overrun(s)
[ 42.760000] FBIO ACCEL 0
[ 42.760000] 00000000 00000000
[ 42.770000] FBIO ACCEL 2
[ 42.780000] SMP863x manual blit 1
[ 42.790000] New FB OSD resolution [1280:720] , virtual [1280:1440], bpp 32
[ 42.830000] SMP863x: OSD: dst_surf = 24c93834, size = 3686400
[ 42.870000] SMP863x FB PAN: 0 0
[ 44.680000] => vtuner open <=
[ 44.680000] VTUNER_SET_NAME
[ 44.690000] VTUNER_SET_TYPE
[ 44.690000] ttyS0: 3 input overrun(s)
[ 44.700000] DVB: registering adapter 0 frontend 0 (vTuner DVB-T)...
[ 45.090000] eth0: no IPv6 routers present
[ 70.220000] setting 12V off
[ 71.270000] SMP863x: RFNum 36 PwrMode 1 SysMode 1 Sound 0
[ 71.290000] i2c_write_hw: ack error (somewhere during transfer)
[ 71.290000] SMP863x: nim_RF_cmd Fail!!
[ 71.300000] ttyS0: 3 input overrun(s)
[ 71.300000] SMP863x: RFNum 36 PwrMode 1 SysMode 1 Sound 0
[ 71.320000] i2c_write_hw: ack error (somewhere during transfer)
[ 71.330000] SMP863x: nim_RF_cmd Fail!!
[ 71.330000] SMP863x: RFNum 36 PwrMode 1 SysMode 1 Sound 0
[ 71.350000] i2c_write_hw: ack error (somewhere during transfer)
[ 71.360000] SMP863x: nim_RF_cmd Fail!!
[ 71.360000] SMP863x: RFNum 36 PwrMode 1 SysMode 1 Sound 0
[ 71.380000] i2c_write_hw: ack error (somewhere during transfer)
[ 71.390000] SMP863x: nim_RF_cmd Fail!!
[ 71.390000] SMP863x: RFNum 36 PwrMode 1 SysMode 1 Sound 0
[ 71.410000] i2c_write_hw: ack error (somewhere during transfer)
[ 71.420000] SMP863x: nim_RF_cmd Fail!!
[ 90.150000] SMP863x: AUDIO SET_MIXER
[ 90.160000] SMP863x: AUDIO SET_MIXER
[ 90.160000] ttyS0: 2 input overrun(s)
[ 90.450000] SMP863x: Source: fe[0] demux[0] ?
[ 95.750000] SMP863x: AUDIO SELECT_SOURCE DEMUX
[ 95.790000] SMP863x audio: MPEG
[ 95.900000] SMP863x: AUDIO PLAY
[ 95.910000] SMP863x: VIDEO SELECT SOURCE DEMUX
[ 95.910000] SMP863x: VIDEO SELECT SOURCE DEMUX
[ 95.930000] SMP863x video: MPEG2
[ 95.990000] SMP863x: VIDEO FREEZE
[ 96.000000] ttyS0: 2 input overrun(s)
[ 96.000000] SMP863x: VIDEO PLAY
[ 96.040000] SMP863x: VIDEO SLOWMOTION 0
[ 96.050000] SMP863x: VIDEO FAST FORWARD 0
[ 96.050000] SMP863x: VIDEO CONTINUE
[ 96.130000] GOT first PTS fe05b2c7, PTS ---> STC, start playing on Sigma demux0 93df0e80 93df0c80
[ 96.180000] SMP863x STC PLAY
root@azboxhd:~#




... but scan on usb dongle DVB-T tuner not found all channel mux service on UHF band ... with same terrestrial setting conf "Europe, Middle East, Africa: DVB-T Frequencies" how before !

Could be a problem introduced with the merge code !?!


-----====== HDMU 14166 Git 2345 ======-----
14166 ebabe9c bonkel, Mon Jul 6 19:04:48 2015 +0200: fix record label when initial disc
14165 a985581 bonkel, Sat Jul 4 17:41:57 2015 +0200: fix
14164 16eadc0 littlesat, Sat Jul 4 11:46:10 2015 +0200: OSD3DSetup: Add sanity check
14163 1d081bd littlesat, Sat Jul 4 11:42:27 2015 +0200: Fix issue when justplay timer is busy and you start instant recording
14162 08915ce littlesat, Sat Jul 4 11:40:13 2015 +0200: Streamline double timer check in TimerSanityCheck
14161 f3a803c technl, Thu Jul 2 17:05:45 2015 +0200: Estonian translation 1st July 2015 Harmonization: Thanks to rimas Thanks to Pr2 and his constant renewal enigma2.pot
14160 3b03a4a bonkel, Mon Jun 29 23:59:57 2015 +0200: test
14159 ea3b19e bonkel, Mon Jun 29 19:26:13 2015 +0200: fix missing displayskinselector for nemesis
14158 0af8f8c bonkel, Mon Jun 29 19:19:12 2015 +0200: update radio.mvi
14157 2e39560 technl, Sun Jun 28 14:51:23 2015 +0200: French translation, added new strings and some corrections, thnx Pr2
14156 d2fd924 technl, Sun Jun 28 14:50:46 2015 +0200: Updated Slovakian translation, thnx Janda
14155 f625c7c bonkel, Sun Jun 28 13:44:28 2015 +0200: speedtest
14154 5871fcf Huevos, Sat Jun 27 16:12:57 2015 +0200: Solve ScanSetup Issues with DVB-T2


Thanks @bonkel

Ciao ...

[morly]

Mein Problem bei diesem Image:
Ich starte Teletext und kann diesen benutzen - nur wenn ich den beenden möchte schmiert die Box ab und reagiert nicht mehr auf die FB
Kann das wer bestätigen?

- - - Aktualisiert - - -

noch was: beim Wechsel des Audiostreams (z.B Deutsch auf Englisch) friert das Bild ein - nach Senderwechsel (hin und her) gehts wieder weiter

[zeini]

Beim 3.9.2 Kernel von SpaceRat (http://www.opena.tv/azbox-premium/16459-test-image-azbox-hd-suche-tester-looking-volunteers-test-50.html#post155409) funzt der Teletext. Und auch beenden ist kein Problem.
Da funzen auch die Radiosender. Gehen die bei dieser Kernelversion hier?

Das Audioproblem beim Wechsel des Audiostreams gibt es aber auch mit dem 3.9.2 Kernel.

Meiner Meinung nach ist der 3.9.2 Kernel von SpaceRat der beste Kernel bisher.

Probier in mal einfach auch aus, bitte.

[morly]

Radiosender funktionieren nicht,
hab noch Build-Probs mit spacerats Kernel (Patching schlägt fehl)- werde das nochmal versuchen

[arci]

Test with: HDMU_14167_AzboxHD_OE_2345_Flash


Mein Problem bei diesem Image:
Ich starte Teletext und kann diesen benutzen - nur wenn ich den beenden möchte schmiert die Box ab und reagiert nicht mehr auf die FB
Kann das wer bestätigen?


I used the Teletext ... and went out quietly ... the receiver continues to respond!




- - - Aktualisiert - - -

noch was: beim Wechsel des Audiostreams (z.B Deutsch auf Englisch) friert das Bild ein - nach Senderwechsel (hin und her) gehts wieder weiter

Confirm ... and trying several times ... it crash enigma2 ... only solution ... a reboot!

P.S. The problem with the DVB-T scan in the UHF band is still present !!!

Saluti & Ciao @morly ...

[arci]

Test with: HDMU_14169_AzboxHD_OE_2346_Flash

10310 10311 10312

Scan DVB-T tuner ... fixed !!! :) Thanks ...

Remains the problem, detected by @morly, with the audio pid selection on DVB service.

Ciao ...

[kapios]

what user and password have the HDMU image?

i have install HDMU_14169_AzboxHD_OE_2347_Flash.zip

i cannot connect with DCC
i try with
user-root
pass-HDMU or azbox or azboxhd
but nothing

[macmanolo]

You have to flash whit kernel then the user ist root and the password HDMU

[kapios]

You have to flash whit kernel then the user ist root and the password HDMU
no
I have open spa 4.003 kernel
should be flash kernel hdmu?
only.

[macmanolo]

no
I have open spa 4.003 kernel
should be flash kernel hdmu?
only.
Yes Flash The HDMU kernel