lockoo
14.11.2015, 23:42
Hab gerade das neue Image aufm pingu+ geflasht. Kam wieder zum Absturz beim Einrichten.
Anbei das log
<?xml version="1.0" encoding="utf-8"?>
<HDMU>
<enigma2>
<crashdate>Sat Jan 1 01:01:00 2000</crashdate>
<compiledate>Nov 14 2015</compiledate>
<skin>skin.xml</skin>
<sourcedate>Nov 14 2015</sourcedate>
<rev>
<![CDATA[
-----====== HDMU 14291 enigma2 Git 3989 ======-----
]]>
</rev>
<freespace>
<![CDATA[
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/root 121856 54944 66912 45% /
tmpfs 58760 0 58760 0% /ram
/dev/root 121856 54944 66912 45% /dev.static
tmpfs 58760 0 58760 0% /dev
tmpfs 58760 0 58760 0% /dev/shm
tmpfs 58760 4 58756 0% /tmp
/dev/sda1 26225736 447632 24445884 2% /media/hdd
]]>
</freespace>
<freeram>
<![CDATA[
MemTotal: 117524 kB
MemFree: 45300 kB
Buffers: 680 kB
Cached: 34568 kB
SwapCached: 0 kB
Active: 27680 kB
Inactive: 32892 kB
Active(anon): 25324 kB
Inactive(anon): 4 kB
Active(file): 2356 kB
Inactive(file): 32888 kB
Unevictable: 0 kB
Mlocked: 0 kB
SwapTotal: 3652600 kB
SwapFree: 3652600 kB
Dirty: 0 kB
Writeback: 0 kB
AnonPages: 25352 kB
Mapped: 8980 kB
Shmem: 4 kB
Slab: 6652 kB
SReclaimable: 2192 kB
SUnreclaim: 4460 kB
KernelStack: 408 kB
PageTables: 256 kB
Quicklists: 96 kB
NFS_Unstable: 0 kB
Bounce: 0 kB
WritebackTmp: 0 kB
CommitLimit: 3711360 kB
Committed_AS: 45472 kB
VmallocTotal: 507824 kB
VmallocUsed: 3576 kB
VmallocChunk: 501080 kB
]]>
</freeram>
<version>4</version>
</enigma2>
<image>
<stbmodel>spark</stbmodel>
<kernelversion>
<![CDATA[
Linux SPARK 2.6.32.61_stm24_0217 #1 PREEMPT Sat Nov 14 23:02:50 CET 2015 sh4 GNU/Linux
]]>
</kernelversion>
<kernelcmdline>console=ttyAS0,115200 root=/dev/mtdblock6 rw rootfstype=jffs2 init=/bin/devinit coprocessor_mem=4m@0x40000000,4m@0x40400000 printk=1 stmmaceth=ethaddr:24:00:08:00:56:BD</kernelcmdline>
<nimsockets></nimsockets>
<imageversion>
<![CDATA[
version=0350200905300000
]]>
</imageversion>
<imageissue>
<!-- No such file or directory -->
</imageissue>
</image>
<crashlogs>
<enigma2crashlog>
<![CDATA[
uch file or directory
< 33.932230> [eInit] + (21) input device driver
< 33.944539> [eRCDeviceInputDev] device "HDMU RC SPARK" is a remotecontrol
< 33.945057> [eRCDeviceInputDev] device "HDMU RC SPARK" is a remotecontrol
< 33.945421> [eRCInputEventDriver] cannot open /dev/input/event2: No such device
< 33.945648> [eRCDeviceInputDev] device "HDMU RC SPARK" is a mouse
< 33.945885> [eRCInputEventDriver] cannot open /dev/input/event3: No such device
< 33.946090> [eRCDeviceInputDev] device "HDMU RC SPARK" is a mouse
< 33.946318> [eInputDeviceInit] Found 4 input devices.
< 33.946463> [eInit] + (22) Hdmi CEC driver
< 33.957983> [eHdmiCEC] cannot open /dev/hdmi_cec: No such device or address
< 33.958295> [eInit] + (30) eActionMap
< 33.958449> [eInit] + (35) CI Slots
< 33.958592> [CI] scanning for common interfaces..
< 33.959432> [CI] eDVBCIInterfaces->setInputSource(0, 0)
< 33.959976> [CI] eDVBCIInterfaces->setInputSource(1, 1)
< 33.960151> [CI] done, found 0 common interface slots
< 33.960281> [eInit] + (35) CA handler
< 33.961454> [eInit] + (40) eServiceCenter
< 33.989062> [eServiceCenter] settings instance.
< 33.989266> [eInit] + (41) eServiceFactoryDVD
< 33.989509> [eInit] + (41) eServiceFactoryEPlayer3
< 33.989923> [eInit] + (41) eServiceFactoryHDMI
< 33.990095> [eInit] + (41) eServiceFactoryM2TS
< 33.990313> [eInit] + (41) eServiceFactoryMP3
< 33.993455> [eInit] + (41) eServiceFactoryFS
< 33.993681> [eInit] + (41) eServiceFactoryDVB
< 33.993933> [eInit] + (41) Encoders
< 33.994229> [eInit] + (41) Stream server
< 33.995444> [eServerSocket] ERROR on bind: Address already in use
< 33.996129> [eServerSocket] ERROR on bind: Address already in use
< 33.996580> [eInit] reached rl 70
< 33.996861> [eDVBDB] ---- opening lame channel db
< 34.088221> [eDVBDB] reading services (version 4)
< 35.306029> [eDVBDB] loaded 246 channels/transponders and 7060 services
< 35.323208> [eDVBResourceManager] scanning for frontends..
< 35.323691> [eDVBAdapterLinux] get demux 0
< 35.323848> [eDVBAdapterLinux] get demux 1
< 35.323985> [eDVBResourceManager] found 1 adapter, 0 frontends(0 sim) and 2 demux
< 35.324327> [eDVBLocalTimeHandler] RTC not ready... wait for transponder time
< 35.324675> [eEPGCache] Initialized EPGCache (wait for setCacheFile call now)
< 35.400530> [ePNG] couldn't open /usr/local/share/enigma2/skin_default/spinner/wait12.png
< 35.400732> [MAIN] found 11 spinner!
< 35.401335> [setIoPrio] best-effort level 3 ok
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
< 36.768372> [Misc_Options] 12V output detected
[HardwareInfo] Scanning hardware info
Detected: spark
[Harddisk] enumerating block devices...
new Harddisk sda -> /dev/sda -> /dev/sda
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
< 37.938840> [gRC] main thread is non-idle! display spinner!
sec config cleared
sec config completed
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
< 42.109609> [eDVBDB] Renumbering...
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
< 44.477021> [gFBDC] resolution: 500x720x32 stride=5120, 6732kB available for acceleration surfaces.
close failed in file object destructor:
IOError: [Errno 5] Input/output error
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse3' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse2' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse1' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse0' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/event3' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/event2' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 22] Invalid argument >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 22] Invalid argument >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mice' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js3' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js2' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js1' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js0' >
close failed in file object destructor:
IOError: [Errno 5] Input/output error
Selected keymap does not exist!
Activating language Deutsch
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
< 46.795376> [eTuxttxtApp] enable caching
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
[ePopen] command: ip -o addr show dev eth0
< 47.398493> [eConsoleAppContainer] Starting /bin/sh
close failed in file object destructor:
IOError: [Errno 5] Input/output error
< 47.418318> eDBoxLCD::getInstance
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
Plugin Extensions/WebInterface failed to load: No module named plugin
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
< 55.119102> [eSocketMMIHandler] created successfully
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
getModeList for port Component
getModeList for port Scart
getModeList for port HDMI
getModeList for port HDMI-PC
hotplug on dvi
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
current port not available, not setting videomode
current port not available, not setting videomode
current port not available, not setting videomode
current port not available, not setting videomode
current port not available, not setting videomode
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
LINE # automatically generated by enigma 2
LINE
[AutoMount.py] self.automounts without mounts {}
[NetworkBrowser] fallback to default translation for NetworkBrowser
[NetworkBrowser] fallback to default translation for Search for network shares
[NetworkBrowser] fallback to default translation for MountManager
[NetworkBrowser] fallback to default translation for Manage network shares
close failed in file object destructor:
IOError: [Errno 5] Input/output error
wasTimerWakeup failed!
close failed in file object destructor:
IOError: [Errno 5] Input/output error
< 57.354514> [eEPGCache] setCacheFile read/write epg data from/to '/hdd/epg.dat'
Reading ['/usr/lib/enigma2/python/Plugins/SystemPlugins/SoftwareManager/imagewizard.xml']
getStepWithID: start
result: nothing
('de_DE', ('Deutsch', 'de', 'DE', 'ISO-8859-15'))
WizardCreateSummary
Updating values in step 1
wizard step: {'code': u'self.clearSelectedKeys()\nself.selectKey("OK")', 'text': 'Do you want to restore your settings?', 'id': 'restorequestion', 'condition': u'from Plugins.SystemPlugins.SoftwareManager.ImageWizard import checkConfigBackup\nself.backuppath = checkConfigBackup()\nself.condition = (self.backuppath is not None and config.misc.firstrun.value)', 'timeoutaction': 'nextpage', 'nextstep': None, 'code_async': '', 'codeafter_async': '', 'timeoutstep': '', 'list': [('Yes, restore the settings now', 'restore'), ('No, just start my receiver', 'end')], 'timeout': None, 'codeafter': '', 'config': {'screen': None, 'args': None, 'type': ''}}
wizard text Wollen Sie die Einstellungen wiederherstellen?
code self.clearSelectedKeys()
self.selectKey("OK")
selectPic: arrowup
showing list, 1
self.list: <Components.Sources.List.List object at 0x2cb2436c>
self.list: <Components.Sources.List.List object at 0x2cb2436c>
setZPosition
showing config
close failed in file object destructor:
IOError: [Errno 5] Input/output error
[SKIN] Parsing embedded skin <embedded-in-'Mute'>
setValue 50
< 57.986482> [eDVBVolumecontrol] Setvolume: raw: 50 50, -1db: 32 32
< 57.986801> [eDVBVolumecontrol] SetVolume failed to open mixer: No such device
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
[ePopen] command: route -n | grep eth0
< 58.267793> [eConsoleAppContainer] Starting /bin/sh
< 58.272473> [eMainloop::processOneEvent] unhandled POLLERR/HUP/NVAL for fd 25(16)
192.168
0.0.0.0
nameservers: [[192, 168, 1, 1]]
read configured interface: {'lo': {'dhcp': False}, 'wlan0': {'dhcp': True}, 'eth0': {'dhcp': True}}
self.ifaces after loading: {'eth0': {'preup': False, 'predown': False, 'ip': [192, 168, 1, 6], 'up': True, 'mac': '24:00:08:00:56:bd', 'dhcp': True, 'bcast': [192, 168, 1, 255], 'netmask': [255, 255, 255, 0], 'gateway': [192, 168, 1, 1]}}
AT plugin not found
SerienRecorder plugin not found
ER plugin not found
[OpenWebif] no plugins to load
[OpenWebif] started on 80
< 58.476768> [eMainloop::processOneEvent] unhandled POLLERR/HUP/NVAL for fd 27(16)
OK
finished
current: ('Ja, die Einstellungen jetzt wiederherstellen', 'restore')
getStepWithID: restore
result: 7
Updating values in step 8
wizard step: {'code': '', 'text': 'You have chosen to restore your settings. Enigma2 will restart after restore. Please press OK to start the restore now.', 'id': 'restore', 'condition': '', 'timeoutaction': 'nextpage', 'nextstep': 'backupresult', 'code_async': '', 'codeafter_async': '', 'timeoutstep': '', 'list': [], 'timeout': None, 'codeafter': '', 'config': {'screen': <class 'Plugins.SystemPlugins.SoftwareManager.BackupResto re.RestoreScreen'>, 'args': None, 'type': 'ConfigList'}}
wizard text Sie haben sich entschlossen, Ihre Einstellungen wiederherzustellen. Die Benutzeroberfläche wird nach der Wiederherstellung neu starten. Bitte drücken Sie OK, um mit der Wiederherstellung zu beginnen.
showing list, 8
self.list: <Components.Sources.List.List object at 0x2cb2436c>
self.list: <Components.Sources.List.List object at 0x2cb2436c>
setZPosition
showing config
wizard screen <class 'Plugins.SystemPlugins.SoftwareManager.BackupResto re.RestoreScreen'>
[SKIN] Parsing embedded skin <embedded-in-'RestoreScreen'>
clearConfigList <Components.ConfigList.ConfigList object at 0x2cb4f78c> <Components.ConfigList.ConfigList object at 0x2cb242ac>
clearConfigList <Components.ConfigList.ConfigList object at 0x2cb242ac> <Components.ConfigList.ConfigList object at 0x2cb242ac>
Now: 8
Traceback (most recent call last):
File "usr/lib/enigma2/python/Components/ActionMap.py", line 66, in action
File "usr/lib/enigma2/python/Components/ActionMap.py", line 46, in action
File "usr/lib/enigma2/python/Screens/Wizard.py", line 375, in ok
File "usr/lib/enigma2/python/Screens/Wizard.py", line 351, in finished
IOError: [Errno 5] Input/output error
< 60.957915> [ePyObject] (CallObject(<bound method NumberActionMap.action of <Components.ActionMap.NumberActionMap instance at 0x2cb2440c>>,('WizardActions', 'ok')) failed)
]]>
</enigma2crashlog>
</crashlogs>
</HDMU>
Anbei das log
<?xml version="1.0" encoding="utf-8"?>
<HDMU>
<enigma2>
<crashdate>Sat Jan 1 01:01:00 2000</crashdate>
<compiledate>Nov 14 2015</compiledate>
<skin>skin.xml</skin>
<sourcedate>Nov 14 2015</sourcedate>
<rev>
<![CDATA[
-----====== HDMU 14291 enigma2 Git 3989 ======-----
]]>
</rev>
<freespace>
<![CDATA[
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/root 121856 54944 66912 45% /
tmpfs 58760 0 58760 0% /ram
/dev/root 121856 54944 66912 45% /dev.static
tmpfs 58760 0 58760 0% /dev
tmpfs 58760 0 58760 0% /dev/shm
tmpfs 58760 4 58756 0% /tmp
/dev/sda1 26225736 447632 24445884 2% /media/hdd
]]>
</freespace>
<freeram>
<![CDATA[
MemTotal: 117524 kB
MemFree: 45300 kB
Buffers: 680 kB
Cached: 34568 kB
SwapCached: 0 kB
Active: 27680 kB
Inactive: 32892 kB
Active(anon): 25324 kB
Inactive(anon): 4 kB
Active(file): 2356 kB
Inactive(file): 32888 kB
Unevictable: 0 kB
Mlocked: 0 kB
SwapTotal: 3652600 kB
SwapFree: 3652600 kB
Dirty: 0 kB
Writeback: 0 kB
AnonPages: 25352 kB
Mapped: 8980 kB
Shmem: 4 kB
Slab: 6652 kB
SReclaimable: 2192 kB
SUnreclaim: 4460 kB
KernelStack: 408 kB
PageTables: 256 kB
Quicklists: 96 kB
NFS_Unstable: 0 kB
Bounce: 0 kB
WritebackTmp: 0 kB
CommitLimit: 3711360 kB
Committed_AS: 45472 kB
VmallocTotal: 507824 kB
VmallocUsed: 3576 kB
VmallocChunk: 501080 kB
]]>
</freeram>
<version>4</version>
</enigma2>
<image>
<stbmodel>spark</stbmodel>
<kernelversion>
<![CDATA[
Linux SPARK 2.6.32.61_stm24_0217 #1 PREEMPT Sat Nov 14 23:02:50 CET 2015 sh4 GNU/Linux
]]>
</kernelversion>
<kernelcmdline>console=ttyAS0,115200 root=/dev/mtdblock6 rw rootfstype=jffs2 init=/bin/devinit coprocessor_mem=4m@0x40000000,4m@0x40400000 printk=1 stmmaceth=ethaddr:24:00:08:00:56:BD</kernelcmdline>
<nimsockets></nimsockets>
<imageversion>
<![CDATA[
version=0350200905300000
]]>
</imageversion>
<imageissue>
<!-- No such file or directory -->
</imageissue>
</image>
<crashlogs>
<enigma2crashlog>
<![CDATA[
uch file or directory
< 33.932230> [eInit] + (21) input device driver
< 33.944539> [eRCDeviceInputDev] device "HDMU RC SPARK" is a remotecontrol
< 33.945057> [eRCDeviceInputDev] device "HDMU RC SPARK" is a remotecontrol
< 33.945421> [eRCInputEventDriver] cannot open /dev/input/event2: No such device
< 33.945648> [eRCDeviceInputDev] device "HDMU RC SPARK" is a mouse
< 33.945885> [eRCInputEventDriver] cannot open /dev/input/event3: No such device
< 33.946090> [eRCDeviceInputDev] device "HDMU RC SPARK" is a mouse
< 33.946318> [eInputDeviceInit] Found 4 input devices.
< 33.946463> [eInit] + (22) Hdmi CEC driver
< 33.957983> [eHdmiCEC] cannot open /dev/hdmi_cec: No such device or address
< 33.958295> [eInit] + (30) eActionMap
< 33.958449> [eInit] + (35) CI Slots
< 33.958592> [CI] scanning for common interfaces..
< 33.959432> [CI] eDVBCIInterfaces->setInputSource(0, 0)
< 33.959976> [CI] eDVBCIInterfaces->setInputSource(1, 1)
< 33.960151> [CI] done, found 0 common interface slots
< 33.960281> [eInit] + (35) CA handler
< 33.961454> [eInit] + (40) eServiceCenter
< 33.989062> [eServiceCenter] settings instance.
< 33.989266> [eInit] + (41) eServiceFactoryDVD
< 33.989509> [eInit] + (41) eServiceFactoryEPlayer3
< 33.989923> [eInit] + (41) eServiceFactoryHDMI
< 33.990095> [eInit] + (41) eServiceFactoryM2TS
< 33.990313> [eInit] + (41) eServiceFactoryMP3
< 33.993455> [eInit] + (41) eServiceFactoryFS
< 33.993681> [eInit] + (41) eServiceFactoryDVB
< 33.993933> [eInit] + (41) Encoders
< 33.994229> [eInit] + (41) Stream server
< 33.995444> [eServerSocket] ERROR on bind: Address already in use
< 33.996129> [eServerSocket] ERROR on bind: Address already in use
< 33.996580> [eInit] reached rl 70
< 33.996861> [eDVBDB] ---- opening lame channel db
< 34.088221> [eDVBDB] reading services (version 4)
< 35.306029> [eDVBDB] loaded 246 channels/transponders and 7060 services
< 35.323208> [eDVBResourceManager] scanning for frontends..
< 35.323691> [eDVBAdapterLinux] get demux 0
< 35.323848> [eDVBAdapterLinux] get demux 1
< 35.323985> [eDVBResourceManager] found 1 adapter, 0 frontends(0 sim) and 2 demux
< 35.324327> [eDVBLocalTimeHandler] RTC not ready... wait for transponder time
< 35.324675> [eEPGCache] Initialized EPGCache (wait for setCacheFile call now)
< 35.400530> [ePNG] couldn't open /usr/local/share/enigma2/skin_default/spinner/wait12.png
< 35.400732> [MAIN] found 11 spinner!
< 35.401335> [setIoPrio] best-effort level 3 ok
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
< 36.768372> [Misc_Options] 12V output detected
[HardwareInfo] Scanning hardware info
Detected: spark
[Harddisk] enumerating block devices...
new Harddisk sda -> /dev/sda -> /dev/sda
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
< 37.938840> [gRC] main thread is non-idle! display spinner!
sec config cleared
sec config completed
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
< 42.109609> [eDVBDB] Renumbering...
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
< 44.477021> [gFBDC] resolution: 500x720x32 stride=5120, 6732kB available for acceleration surfaces.
close failed in file object destructor:
IOError: [Errno 5] Input/output error
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse3' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse2' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse1' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse0' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/event3' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/event2' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 22] Invalid argument >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 22] Invalid argument >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mice' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js3' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js2' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js1' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js0' >
close failed in file object destructor:
IOError: [Errno 5] Input/output error
Selected keymap does not exist!
Activating language Deutsch
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
< 46.795376> [eTuxttxtApp] enable caching
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
[ePopen] command: ip -o addr show dev eth0
< 47.398493> [eConsoleAppContainer] Starting /bin/sh
close failed in file object destructor:
IOError: [Errno 5] Input/output error
< 47.418318> eDBoxLCD::getInstance
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
Plugin Extensions/WebInterface failed to load: No module named plugin
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
< 55.119102> [eSocketMMIHandler] created successfully
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
getModeList for port Component
getModeList for port Scart
getModeList for port HDMI
getModeList for port HDMI-PC
hotplug on dvi
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
current port not available, not setting videomode
current port not available, not setting videomode
current port not available, not setting videomode
current port not available, not setting videomode
current port not available, not setting videomode
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
LINE # automatically generated by enigma 2
LINE
[AutoMount.py] self.automounts without mounts {}
[NetworkBrowser] fallback to default translation for NetworkBrowser
[NetworkBrowser] fallback to default translation for Search for network shares
[NetworkBrowser] fallback to default translation for MountManager
[NetworkBrowser] fallback to default translation for Manage network shares
close failed in file object destructor:
IOError: [Errno 5] Input/output error
wasTimerWakeup failed!
close failed in file object destructor:
IOError: [Errno 5] Input/output error
< 57.354514> [eEPGCache] setCacheFile read/write epg data from/to '/hdd/epg.dat'
Reading ['/usr/lib/enigma2/python/Plugins/SystemPlugins/SoftwareManager/imagewizard.xml']
getStepWithID: start
result: nothing
('de_DE', ('Deutsch', 'de', 'DE', 'ISO-8859-15'))
WizardCreateSummary
Updating values in step 1
wizard step: {'code': u'self.clearSelectedKeys()\nself.selectKey("OK")', 'text': 'Do you want to restore your settings?', 'id': 'restorequestion', 'condition': u'from Plugins.SystemPlugins.SoftwareManager.ImageWizard import checkConfigBackup\nself.backuppath = checkConfigBackup()\nself.condition = (self.backuppath is not None and config.misc.firstrun.value)', 'timeoutaction': 'nextpage', 'nextstep': None, 'code_async': '', 'codeafter_async': '', 'timeoutstep': '', 'list': [('Yes, restore the settings now', 'restore'), ('No, just start my receiver', 'end')], 'timeout': None, 'codeafter': '', 'config': {'screen': None, 'args': None, 'type': ''}}
wizard text Wollen Sie die Einstellungen wiederherstellen?
code self.clearSelectedKeys()
self.selectKey("OK")
selectPic: arrowup
showing list, 1
self.list: <Components.Sources.List.List object at 0x2cb2436c>
self.list: <Components.Sources.List.List object at 0x2cb2436c>
setZPosition
showing config
close failed in file object destructor:
IOError: [Errno 5] Input/output error
[SKIN] Parsing embedded skin <embedded-in-'Mute'>
setValue 50
< 57.986482> [eDVBVolumecontrol] Setvolume: raw: 50 50, -1db: 32 32
< 57.986801> [eDVBVolumecontrol] SetVolume failed to open mixer: No such device
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
[ePopen] command: route -n | grep eth0
< 58.267793> [eConsoleAppContainer] Starting /bin/sh
< 58.272473> [eMainloop::processOneEvent] unhandled POLLERR/HUP/NVAL for fd 25(16)
192.168
0.0.0.0
nameservers: [[192, 168, 1, 1]]
read configured interface: {'lo': {'dhcp': False}, 'wlan0': {'dhcp': True}, 'eth0': {'dhcp': True}}
self.ifaces after loading: {'eth0': {'preup': False, 'predown': False, 'ip': [192, 168, 1, 6], 'up': True, 'mac': '24:00:08:00:56:bd', 'dhcp': True, 'bcast': [192, 168, 1, 255], 'netmask': [255, 255, 255, 0], 'gateway': [192, 168, 1, 1]}}
AT plugin not found
SerienRecorder plugin not found
ER plugin not found
[OpenWebif] no plugins to load
[OpenWebif] started on 80
< 58.476768> [eMainloop::processOneEvent] unhandled POLLERR/HUP/NVAL for fd 27(16)
OK
finished
current: ('Ja, die Einstellungen jetzt wiederherstellen', 'restore')
getStepWithID: restore
result: 7
Updating values in step 8
wizard step: {'code': '', 'text': 'You have chosen to restore your settings. Enigma2 will restart after restore. Please press OK to start the restore now.', 'id': 'restore', 'condition': '', 'timeoutaction': 'nextpage', 'nextstep': 'backupresult', 'code_async': '', 'codeafter_async': '', 'timeoutstep': '', 'list': [], 'timeout': None, 'codeafter': '', 'config': {'screen': <class 'Plugins.SystemPlugins.SoftwareManager.BackupResto re.RestoreScreen'>, 'args': None, 'type': 'ConfigList'}}
wizard text Sie haben sich entschlossen, Ihre Einstellungen wiederherzustellen. Die Benutzeroberfläche wird nach der Wiederherstellung neu starten. Bitte drücken Sie OK, um mit der Wiederherstellung zu beginnen.
showing list, 8
self.list: <Components.Sources.List.List object at 0x2cb2436c>
self.list: <Components.Sources.List.List object at 0x2cb2436c>
setZPosition
showing config
wizard screen <class 'Plugins.SystemPlugins.SoftwareManager.BackupResto re.RestoreScreen'>
[SKIN] Parsing embedded skin <embedded-in-'RestoreScreen'>
clearConfigList <Components.ConfigList.ConfigList object at 0x2cb4f78c> <Components.ConfigList.ConfigList object at 0x2cb242ac>
clearConfigList <Components.ConfigList.ConfigList object at 0x2cb242ac> <Components.ConfigList.ConfigList object at 0x2cb242ac>
Now: 8
Traceback (most recent call last):
File "usr/lib/enigma2/python/Components/ActionMap.py", line 66, in action
File "usr/lib/enigma2/python/Components/ActionMap.py", line 46, in action
File "usr/lib/enigma2/python/Screens/Wizard.py", line 375, in ok
File "usr/lib/enigma2/python/Screens/Wizard.py", line 351, in finished
IOError: [Errno 5] Input/output error
< 60.957915> [ePyObject] (CallObject(<bound method NumberActionMap.action of <Components.ActionMap.NumberActionMap instance at 0x2cb2440c>>,('WizardActions', 'ok')) failed)
]]>
</enigma2crashlog>
</crashlogs>
</HDMU>