HDMU 15671 Image funktioniert nicht richtig

[krabbler]

HDMU 15671_4602 USF913 , keine Plugin anzeige, der Rest geht ,.

warum nimmt man nicht einen defekten build aus dem Download ?

Gruß

Krabbler

[bonkel]

Weil man Plugins über anderen Wege laden kann. Und wenn ich jetzt defekte lösche hat kein Image auf dem Server wäre

[Alex23]

Hallo,
es treten die selben Fehler und Funktionen auf, wie beim 15672 (Fernbedienung, Tuner, Plugins, Aufnahmen, mp3).
Mehr habe ich erstmal nicht getestet

ToFiÿ <<< Loader L23231>>>
 “ToFi"Z¿Š¿Z[!p
 

 Board: TF7700  [29-bit mode]
 

 

 

 U-Boot 1.3.1-gfeb9b4b7-dirty (Oct 23 2011 - 12:43:54) - stm23_0043
 

 DRAM:  128 MiB
 NOR:     8 MiB
 In:    serial
 Out:   serial
 Err:   serial
 Hit any key to stop autoboot:  1  0 
 (Re)start USB...
 USB:   scanning bus for devices... 1 USB Device(s) found
        scanning bus for storage devices... 0 Storage Device(s) found
 ** Can't read from device 0 **
 

 ** Unable to use usb 0:1 for fatload **
 ## Booting image at 85000000 ...
 Bad Magic Number
 ## Booting image at 80060000 ...
    Image Name:   Linux-2.6.32.71_stm24_0217
    Image Type:   SuperH Linux Kernel Image (gzip compressed)
    Data Size:    1789348 Bytes =   1.7 MiB
    Load Address: 84001000
    Entry Point:  84002000
    Verifying Checksum ... OK
    Uncompressing Kernel Image ... OK
 

 Starting kernel console=ttyAS0,115200 root=/dev/sda1 rw init=/bin/devinit ip=192.168.178.100:::255.255.255.0:tf7700:eth0:off mem=128m coprocessor_mem=4m@0x10000000,4m@0x10400000 rootdelay=6 nwhwconf=device:eth0,hwaddr:00:3e:9e:53:7d:9e - 0x00000000 - 0 ...
 

 

 INIT: version 2.88 booting
 

 init frontpanel
 fsck.jfs version 1.1.15, 04-Mar-2011
 processing started: 12/8/2016 20:58:09
 The current device is:  /dev/sda3
 

 The superblock does not describe a correct jfs file system.
 

 If device /dev/sda3 is valid and contains a jfs file system,
 then both the primary and secondary superblocks are corrupt
 and cannot be repaired, and fsck cannot continue.
 

 Otherwise, make sure the entered device /dev/sda3 is correct.
 

 [mountvirtfs] Mount /dev in tmpfs
 [mountvirtfs] Copying device nodes to /dev
 Starting portmap daemon....
 Loading autofs
 Starting autofs
 [mountall] Mounting local filesystems...
 Cleaning /tmp.
 Hostname: TOPF.
 init stmfb
 LOADING MODULES
 load firmware
 copLoadFile (file /boot/audio.elf)
 ustslave: Kernel Version: 24
 base_address 0x10400000
 seeking to 0
 seeking to 5f00
 seeking to 12320
 seeking to 1aa20
 seeking to 173100
 seeking to 173138
 seeking to 173170
 seeking to 1b9058
 seeking to 1b9060
 seeking to 1b9068
 seeking to 1b9070
 seeking to 1d0920
 seeking to 1d0a00
 copLoadFile (file /boot/video.elf)
 ustslave: Kernel Version: 24
 base_address 0x10000000
 seeking to 0
 seeking to 1277c0
 seeking to 1277f8
 seeking to 127830
 seeking to 14d558
 seeking to 14d564
 seeking to 14d570
 seeking to 17df30
 seeking to 180000
 init embx
 init AVS
 insmod: /lib/modules/smartcard.ko: module not found
 [mountall] Mounting local filesystems...
 Model: 'tf7700hdpvr'
 vBoxType: 5
 Input device name: "TDT RC event driver"
 Selected Remote: Tf7700 RemoteControl
 RemoteControl Map:
              STANDBY - 0A - 116
                 MUTE - 0C - 113
                 ZOOM - 42 - 372
                VMODE - 43 -  47
                AUDIO - 08 - 392
              0BUTTON - 10 -  11
              1BUTTON - 11 -   2
              2BUTTON - 12 -   3
              3BUTTON - 13 -   4
              4BUTTON - 14 -   5
              5BUTTON - 15 -   6
              6BUTTON - 16 -   7
              7BUTTON - 17 -   8
              8BUTTON - 18 -   9
              9BUTTON - 19 -  10
                 BACK - 1E - 158
                 INFO - 1D - 358
               SEARCH - 05 - 217
             SUBTITLE - 07 - 370
                 TEXT - 47 - 388
              DOWN/P- - 01 - 108
                UP/P+ - 00 - 103
             RIGHT/V+ - 02 - 106
              LEFT/V- - 03 - 105
              OK/LIST - 1F - 352
                 MENU - 1A - 139
                GUIDE - 1B - 365
                 EXIT - 1C - 102
                  FAV - 09 - 364
                  RED - 4D - 398
                GREEN - 0D - 399
               YELLOW - 0E - 400
                 BLUE - 0F - 401
               REWIND - 45 - 168
                PAUSE - 06 - 119
                 PLAY - 46 - 207
          FASTFORWARD - 48 - 208
               RECORD - 4B - 167
                 STOP - 4A - 128
           SLOWMOTION - 49 - 409
           RECORDLIST - 51 - 395
                  SAT - 5E - 381
             STEPBACK - 50 - 412
          STEPFORWARD - 52 - 407
            BOOKMARKS - 4C - 156
             TV/RADIO - 04 - 378
                MEDIA - 40 - 226
                TIMER - 44 - 362
 Frontpanel Map:
          CHANNELDOWN - 02 - 109
            CHANNELUP - 03 - 104
           VOLUMEDOWN - 01 - 114
 showSinglePic /boot/bootlogo.mvi
             VOLUMEUP - 06 - 115
              STANDBY - 0C - 116
 Supports Long KeyPress: 1
 processComplex >
 period 110, delay 10
 Using period=110 delay=10
 [SEM] DOWN
 VIDEO_SELECT_SOURCE MEMORY (Success)
 VIDEO_PLAY (Success)
 VIDEO_CONTINUE: (Success)
 VIDEO_CLEAR_BUFFER: (Invalid argument)
 Deconfiguring network interfaces... done.
 Setting up IP spoofing protection: rp_filter.
 Configuring network interfaces... done.
 [set_was_timer_wakeup] no timer aktiv
 starting e2->
 Simple mixer control 'HDMI',0
   Capabilities: pvolume pvolume-joined pswitch pswitch-joined
   Playback channels: Mono
   Limits: Playback -31 - 31
 Simple mixer control 'Analog',0
   Mono: Playback 6 [60%] [on]
   Capabilities: pvolume pvolume-joined pswitch pswitch-joined
   Playback channels: Mono
   Limits: Playback -31 - 31
   Mono: Playback 6 [60%] [on]
 Simple mixer control 'SPDIF',0
   Capabilities: pvolume pvolume-joined pswitch pswitch-joined
   Playback channels: Mono
   Limits: Playback -31 - 31
   Mono: Playback 6 [60%] [on]
 

 

 (enigma2:2301): GStreamer-WARNING **: External plugin loader failed. This most likely means that the plugin loader helper binary was not found or could not be run. You might need to set the GST_PLUGIN_SCANNER environment variable if your setup is unusual. This should normally not be required though.
 PYTHONPATH: /usr/lib/enigma2/python
 DVB_API_VERSION 5 DVB_API_VERSION_MINOR 3
 ENIGMA2_DEBUG settings: Level=3
 [MAIN] executing main
 libpng warning: iCCP: known incorrect sRGB profile
 libpng warning: iCCP: cHRM chunk does not match sRGB
 libpng warning: iCCP: known incorrect sRGB profile
 libpng warning: iCCP: cHRM chunk does not match sRGB
 Model not found
 libpng warning: iCCP: known incorrect sRGB profile
 ********** end showiframe
 VIDEO_SELECT_SOURCE DEMUX (Invalid argument)
 killall: showiframe: no process killed
 libpng warning: iCCP: known incorrect sRGB profile

[Alex23]

Hier treten ebenso dieselben Fehler und Funktionen auf, wie zuletzt (Fernbedienung, Tuner, Plugins, Aufnahmen, mp3).
Beim Spark 7162 (15682) funktioniert der Tuner, aber es hängt bei der mp3 Wiedergabe.

Das Log geht bis zum Abspielversuch einer Aufnahme:

ToFiÿ <<< Loader L23231>>>
 “ToFi"Z¿Š¿Z[!p
 

 Board: TF7700  [29-bit mode]

 

 

 

 U-Boot 1.3.1-gfeb9b4b7-dirty (Oct 23 2011 - 12:43:54) - stm23_0043
 

 DRAM:  128 MiB
 NOR:     8 MiB
 In:    serial
 Out:   serial
 Err:   serial
 Hit any key to stop autoboot:  1  0 
 (Re)start USB...
 USB:   scanning bus for devices... 1 USB Device(s) found
        scanning bus for storage devices... 0 Storage Device(s) found
 ** Can't read from device 0 **
 

 ** Unable to use usb 0:1 for fatload **
 ## Booting image at 85000000 ...
 Bad Magic Number
 ## Booting image at 80060000 ...
    Image Name:   Linux-2.6.32.71_stm24_0217
    Image Type:   SuperH Linux Kernel Image (gzip compressed)
    Data Size:    1789347 Bytes =   1.7 MiB
    Load Address: 84001000
    Entry Point:  84002000
    Verifying Checksum ... OK
    Uncompressing Kernel Image ... OK
 

 Starting kernel console=ttyAS0,115200 root=/dev/sda1 rw init=/bin/devinit ip=192.168.178.100:::255.255.255.0:tf7700:eth0:off mem=128m coprocessor_mem=4m@0x10000000,4m@0x10400000 rootdelay=6 nwhwconf=device:eth0,hwaddr:00:3e:9e:53:7d:9e - 0x00000000 - 0 ...
 

 

 INIT: version 2.88 booting
 

 init frontpanel
 fsck.jfs version 1.1.15, 04-Mar-2011
 processing started: 12/9/2016 17:34:17
 The current device is:  /dev/sda3
 

 The superblock does not describe a correct jfs file system.
 

 If device /dev/sda3 is valid and contains a jfs file system,
 then both the primary and secondary superblocks are corrupt
 and cannot be repaired, and fsck cannot continue.
 

 Otherwise, make sure the entered device /dev/sda3 is correct.
 

 [mountvirtfs] Mount /dev in tmpfs
 [mountvirtfs] Copying device nodes to /dev
 Starting portmap daemon....
 Loading autofs
 Starting autofs
 [mountall] Mounting local filesystems...
 Cleaning /tmp.
 Hostname: TOPF.
 init stmfb
 LOADING MODULES
 load firmware
 copLoadFile (file /boot/audio.elf)
 ustslave: Kernel Version: 24
 base_address 0x10400000
 seeking to 0
 seeking to 5f00
 seeking to 12320
 seeking to 1aa20
 seeking to 173100
 seeking to 173138
 seeking to 173170
 seeking to 1b9058
 seeking to 1b9060
 seeking to 1b9068
 seeking to 1b9070
 seeking to 1d0920
 seeking to 1d0a00
 copLoadFile (file /boot/video.elf)
 ustslave: Kernel Version: 24
 base_address 0x10000000
 seeking to 0
 seeking to 1277c0
 seeking to 1277f8
 seeking to 127830
 seeking to 14d558
 seeking to 14d564
 seeking to 14d570
 seeking to 17df30
 seeking to 180000
 init embx
 init AVS
 insmod: /lib/modules/smartcard.ko: module not found
 showSinglePic /boot/bootlogo.mvi
 Model: 'tf7700hdpvr'
 vBoxType: 5
 Input device name: "TDT RC event driver"
 Selected Remote: Tf7700 RemoteControl
 RemoteControl Map:
              STANDBY - 0A - 116
                 MUTE - 0C - 113
                 ZOOM - 42 - 372
                VMODE - 43 -  47
                AUDIO - 08 - 392
              0BUTTON - 10 -  11
              1BUTTON - 11 -   2
              2BUTTON - 12 -   3
              3BUTTON - 13 -   4
              4BUTTON - 14 -   5
              5BUTTON - 15 -   6
              6BUTTON - 16 -   7
              7BUTTON - 17 -   8
              8BUTTON - 18 -   9
              9BUTTON - 19 -  10
                 BACK - 1E - 158
                 INFO - 1D - 358
               SEARCH - 05 - 217
             SUBTITLE - 07 - 370
                 TEXT - 47 - 388
              DOWN/P- - 01 - 108
                UP/P+ - 00 - 103
             RIGHT/V+ - 02 - 106
              LEFT/V- - 03 - 105
              OK/LIST - 1F - 352
                 MENU - 1A - 139
                GUIDE - 1B - 365
                 EXIT - 1C - 102
                  FAV - 09 - 364
                  RED - 4D - 398
                GREEN - 0D - 399
               YELLOW - 0E - 400
                 BLUE - 0F - 401
               REWIND - 45 - 168
                PAUSE - 06 - 119
                 PLAY - 46 - 207
          FASTFORWARD - 48 - 208
               RECORD - 4B - 167
                 STOP - 4A - 128
           SLOWMOTION - 49 - 409
           RECORDLIST - 51 - 395
                  SAT - 5E - 381
 VIDEO_SELECT_SOURCE MEMORY (Success)
 VIDEO_PLAY (Success)
 VIDEO_CONTINUE: (Success)
 VIDEO_CLEAR_BUFFER: (Invalid argument)
 [mountall] Mounting local filesystems...
             STEPBACK - 50 - 412
          STEPFORWARD - 52 - 407
            BOOKMARKS - 4C - 156
             TV/RADIO - 04 - 378
                MEDIA - 40 - 226
                TIMER - 44 - 362
 Frontpanel Map:
          CHANNELDOWN - 02 - 109
            CHANNELUP - 03 - 104
           VOLUMEDOWN - 01 - 114
             VOLUMEUP - 06 - 115
              STANDBY - 0C - 116
 Supports Long KeyPress: 1
 processComplex >
 period 110, delay 10
 Using period=110 delay=10
 [SEM] DOWN
 Deconfiguring network interfaces... done.
 Setting up IP spoofing protection: rp_filter.
 Configuring network interfaces... done.
 [set_was_timer_wakeup] no timer aktiv
 starting e2->
 Simple mixer control 'Analog',0
   Capabilities: pvolume pvolume-joined pswitch pswitch-joined
   Playback channels: Mono
   Limits: Playback -31 - 31
   Mono: Playback 6 [60%] [on]
 Simple mixer control 'HDMI',0
   Capabilities: pvolume pvolume-joined pswitch pswitch-joined
   Playback channels: Mono
   Limits: Playback -31 - 31
   Mono: Playback 6 [60%] [on]
 Simple mixer control 'SPDIF',0
   Capabilities: pvolume pvolume-joined pswitch pswitch-joined
   Playback channels: Mono
   Limits: Playback -31 - 31
   Mono: Playback 6 [60%] [on]
 

 

 (enigma2:2300): GStreamer-WARNING **: External plugin loader failed. This most likely means that the plugin loader helper binary was not found or could not be run. You might need to set the GST_PLUGIN_SCANNER environment variable if your setup is unusual. This should normally not be required though.
 PYTHONPATH: /usr/lib/enigma2/python
 DVB_API_VERSION 5 DVB_API_VERSION_MINOR 3
 ENIGMA2_DEBUG settings: Level=3
 [MAIN] executing main
 libpng warning: iCCP: known incorrect sRGB profile
 libpng warning: iCCP: cHRM chunk does not match sRGB
 libpng warning: iCCP: known incorrect sRGB profile
 libpng warning: iCCP: cHRM chunk does not match sRGB
 Model not found
 libpng warning: iCCP: known incorrect sRGB profile
 ********** end showiframe
 VIDEO_SELECT_SOURCE DEMUX (Invalid argument)
 libpng warning: iCCP: known incorrect sRGB profile
 KEY by code: 80 - STOP
 ****        88144 1 ****
 [SEM] UP
 KEY_PRESS - 80 1
 ++++            3 ms ++++
 KEY by code: 80 - STOP
 ****           31 1 ****
 ++++           89 ms ++++
 KEY_RELEASE - 80 00 1 1 CAUSE=Timeout
 ----          122 ms ----
 [SEM] DOWN
 KEY by code: 160 - OK/LIST
 ****        11799 2 ****
 [SEM] UP
 KEY_PRESS - 160 2
 ++++            0 ms ++++
 KEY_RELEASE - 160 00 2 2 CAUSE=Timeout
 ----          123 ms ----
 [SEM] DOWN
 Model not found
 TuxTxt cache cleared
 TuxTxt cache cleared
 TuxTxt: initialized
 TuxTxt service started 21
 TuxTxt running thread...(021)
 <   119.525> [eDVBPESReader] Created. Opening demux
 <   119.529> [eDVBPESReader] Created. Opening demux
 TuxTxt: readerror
 TuxTxt: readerror
 TuxTxt: readerror
 TuxTxt: readerror
 TuxTxt: readerror
 TuxTxt: readerror
 TuxTxt: readerror
 libpng warning: iCCP: known incorrect sRGB profile
 TuxTxt: readerror
 <   124.161> [eDVBPESReader] ERROR reading PES (fd=37): Value too large for defined data type
 TuxTxt: readerror
 TuxTxt: readerror
 TuxTxt: readerror
 <   125.239> [eDVBPESReader] ERROR reading PES (fd=37): Value too large for defined data type
 TuxTxt: readerror
 TuxTxt: readerror
 <   125.710> [eDVBPESReader] ERROR reading PES (fd=37): Value too large for defined data type
 TuxTxt: readerror
 <   126.060> [eDVBPESReader] ERROR reading PES (fd=37): Value too large for defined data type
 TuxTxt: readerror
 TuxTxt: readerror
 TuxTxt: readerror
 TuxTxt: readerror
 TuxTxt: readerror
 TuxTxt: readerror
 TuxTxt: readerror
 TuxTxt: readerror
 TuxTxt: readerror
 TuxTxt: readerror
 TuxTxt: readerror
 TuxTxt: readerror
 TuxTxt: readerror
 TuxTxt: readerror
 TuxTxt: readerror
 TuxTxt: readerror
 TuxTxt: readerror
 TuxTxt: readerror
 TuxTxt: readerror
 TuxTxt: readerror
 TuxTxt: readerror
 TuxTxt: readerror
 TuxTxt: readerror
 TuxTxt: readerror
 TuxTxt: readerror
 TuxTxt: readerror
 TuxTxt: readerror
 TuxTxt: readerror
 TuxTxt: readerror
 TuxTxt: readerror
 TuxTxt: readerror

[bonkel]

Kannst du mal testweise alle Kabel ab machen. Also sat und oder Kabel. Und dann Box ein schalten und mp3 testen

[Alex23]

Da du von Sat und/oder Kabel schriebst, gehe ich davon aus, dass du einen Test bei dem Spark 7162 meintest. Ohne Sat-Kabel ging die mp3-Wiedergabe von mehreren Titeln. Allerdings kam es beim Drücken von Exit zum crash.Ich konnte es später allerdings nicht mehr nachstellen. Da lief es dann ganz ohne Probleme (Abspielen; Player beenden; Abspielen; Beenden;...).Im Log ist die Rede von "Premature end of JPEG file". Ich weiß allerdings nicht, ob das relevant ist.Ich hänge mal beide an.

[bonkel]

Genau meinte die spark ist ja witzig Daa ohne tuner Signal mp3 geht

[KleinerSchelm]

wobei ein 217er image nicht so toll für die töpfe, würde da eher 209er bauen lassen.
Ohne patch kann es am sata port zu korrupten Dateien kommen.
Kann in dem Fall auch wo anders dran liegen. Aber ohne sata path haben viele Töpfe so ihre Probleme. Den sata patch gibt es nur bis kernel 209.

[bonkel]

04-Dec-2016 13:04 hab ich ein 209er gebaut...scheint nich als würde das dass prob lösen

[sathep]

Hallo,
ah jetzt verstehe ich wieso die Plugins nicht laufen, wo kann man die denn runterladen und dann installieren. War lange nicht mehr mit HDMU beschäftigt, da ich das meiste über die Dreamboxen mache.
Gruß
Sathep