HDMU 15671 Image funktioniert nicht richtig

[Spacie32]

Das neue HDMU 15671 Image geht nicht richtig.
Fernbedienung reagiert überhaupt nicht, OpenWebif Remote funktioniert.
Und Tuner geht auch nicht.

Gruß Oliver

[Spacie32]

Oder mach ich etwas falsch?
Hab jetzt mein altes Image wieder drauf und da geht alles.

Gruß Oliver

[neipe]

die aktuellen Images haben Probs, wir sind drann.
Also du machst nix falsch.

Nur ein bissl geduld

[Spacie32]

Super, danke für die Antwort.

[bonkel]

Log wäre gut

[Alex23]

Da die Fernbedienung nicht geht kann ich auch die Ersteinrichtung nicht beenden. Ich habe jetzt nur ein Log vom Start, weiter komme ich ja nicht. Vielleicht hilft es euch ja weiter. Bei Fernbedienungseingaben leuchtet zwar das Fernbedienungs-Element im Frontpanel, aber im Log wird nichts davon ausgegeben.

Spoiler: 

#Log file from Morlys SH4 STB Admin Tool from: Sa Dez 3 2016, 17:04:07

ToFiÿ
<<< Loader L23231>>>
?ToFi"Z¿?¿Z[!p

Board: TF7700  [29-bit mode]



U-Boot 1.3.1-gfeb9b4b7-dirty (Oct 23 2011 - 12:43:54) - stm23_0043

DRAM:  128 MiB
NOR:     8 MiB
In:    serial
Out:   serial
Err:   serial
Hit any key to stop autoboot:  1  0 
(Re)start USB...
USB:   scanning bus for devices... 1 USB Device(s) found
       scanning bus for storage devices... 0 Storage Device(s) found
** Can't read from device 0 **

** Unable to use usb 0:1 for fatload **
## Booting image at 85000000 ...
Bad Magic Number
## Booting image at 80060000 ...
   Image Name:   Linux-2.6.32.71_stm24_0217
   Image Type:   SuperH Linux Kernel Image (gzip compressed)
   Data Size:    1789352 Bytes =   1.7 MiB
   Load Address: 84001000
   Entry Point:  84002000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK

Starting kernel console=ttyAS0,115200 root=/dev/sda1 rw init=/bin/devinit ip=192.168.178.100:::255.255.255.0:tf7700:eth0:off mem=128m coprocessor_mem=4m@0x10000000,4m@0x10400000 rootdelay=6 nwhwconf=device:eth0,hwaddr:00:3e:9e:53:7d:9e - 0x00000000 - 0 ...


INIT: version 2.88 booting

init frontpanel
fsck.jfs version 1.1.15, 04-Mar-2011
processing started: 12/3/2016 16:57:38
The current device is:  /dev/sda3


The superblock does not describe a correct jfs file system.

If device /dev/sda3 is valid and contains a jfs file system,
then both the primary and secondary superblocks are corrupt
and cannot be repaired, and fsck cannot continue.

Otherwise, make sure the entered device /dev/sda3 is correct.

[mountvirtfs] Mount /dev in tmpfs
[mountvirtfs] Copying device nodes to /dev
Starting portmap daemon....
Loading autofs
Starting autofs
[mountall] Mounting local filesystems...
Cleaning /tmp.
Hostname: TOPF.
init stmfb
LOADING MODULES
load firmware
copLoadFile (file /boot/audio.elf)
ustslave: Kernel Version: 24
base_address 0x10400000
seeking to 0
seeking to 5f00
seeking to 12320
seeking to 1aa20
seeking to 173100
seeking to 173138
seeking to 173170
seeking to 1b9058
seeking to 1b9060
seeking to 1b9068
seeking to 1b9070
seeking to 1d0920
seeking to 1d0a00
copLoadFile (file /boot/video.elf)
ustslave: Kernel Version: 24
base_address 0x10000000
seeking to 0
seeking to 1277c0
seeking to 1277f8
seeking to 127830
seeking to 14d558
seeking to 14d564
seeking to 14d570
seeking to 17df30
seeking to 180000
init embx
init AVS
insmod: /lib/modules/smartcard.ko: module not found
/etc/init.d/rcS: line 667: /bin/tffpctl: not found
/etc/init.d/rcS: line 667: tffpctl: not found
[mountall] Mounting local filesystems...
Model: 'tf7700hdpvr'
vBoxType: 5
Input device name: "TDT RC event driver"
Selected Remote: Tf7700 RemoteControl
RemoteControl Map:
             STANDBY - 0A - 116
                MUTE - 0C - 113
                ZOOM - 42 - 372
               VMODE - 43 -  47
               AUDIO - 08 - 392
             0BUTTON - 10 -  11
             1BUTTON - 11 -   2
             2BUTTON - 12 -   3
             3BUTTON - 13 -   4
             4BUTTON - 14 -   5
             5BUTTON - 15 -   6
             6BUTTON - 16 -   7
             7BUTTON - 17 -   8
             8BUTTON - 18 -   9
             9BUTTON - 19 -  10
                BACK - 1E - 158
                INFO - 1D - 358
              SEARCH - 05 - 217
            SUBTITLE - 07 - 370
                TEXT - 47 - 388
             DOWN/P- - 01 - 108
               UP/P+ - 00 - 103
            RIGHT/V+ - 02 - 106
             LEFT/V- - 03 - 105
             OK/LIST - 1F - 352
                MENU - 1A - 139
               GUIDE - 1B - 365
                EXIT - 1C - 102
                 FAV - 09 - 364
                 RED - 4D - 398
               GREEN - 0D - 399
              YELLOW - 0E - 400
                BLUE - 0F - 401
              REWIND - 45 - 168
               PAUSE - 06 - 119
                PLAY - 46 - 207
         FASTFORWARD - 48 - 208
              RECORD - 4B - 167
                STOP - 4A - 128
          SLOWMOTION - 49 - 409
          RECORDLIST - 51 - 395
                 SAT - 5E - 381
            STEPBACK - 50 - 412
         STEPFORWARD - 52 - 407
           BOOKMARKS - 4C - 156
            TV/RADIO - 04 - 378
               MEDIA - 40 - 226
               TIMER - 44 - 362
Frontpanel Map:
         CHANNELDOWN - 02 - 109
           CHANNELUP - 03 - 104
          VOLUMEDOWN - 01 - 114
            VOLUMEUP - 06 - 115
             STANDBY - 0C - 116
Supports Long KeyPress: 1
processComplex >
period 110, delay 10
Using period=110 delay=10
[SEM] DOWN
showSinglePic /boot/bootlogo.mvi
VIDEO_SELECT_SOURCE MEMORY (Success)
VIDEO_PLAY (Success)
VIDEO_CONTINUE: (Success)
VIDEO_CLEAR_BUFFER: (Invalid argument)
Deconfiguring network interfaces... ifdown: interface wlan0 not configured
done.
Setting up IP spoofing protection: rp_filter.
Configuring network interfaces... udhcpc: started, v1.25.1
udhcpc: sending discover
udhcpc: sending discover
udhcpc: sending select for 192.168.1.42
udhcpc: lease of 192.168.1.42 obtained, lease time 864000
route: SIOCDELRT: No such process
adding dns 192.168.1.1
ifconfig: SIOCGIFFLAGS: No such device
done.
[set_was_timer_wakeup] error reading /etc/enigma2/timers.xml
[set_was_timer_wakeup] no timer aktiv
starting e2->
Simple mixer control 'SPDIF',0
  Capabilities: pvolume pvolume-joined pswitch pswitch-joined
  Playback channels: Mono
  Limits: Playback -31 - 31
  Mono: Playback 6 [60%] [on]
Simple mixer control 'Analog',0
  Capabilities: pvolume pvolume-joined pswitch pswitch-joined
  Playback channels: Mono
  Limits: Playback -31 - 31
  Mono: Playback 6 [60%] [on]
Simple mixer control 'HDMI',0
  Capabilities: pvolume pvolume-joined pswitch pswitch-joined
  Playback channels: Mono
  Limits: Playback -31 - 31
  Mono: Playback 6 [60%] [on]


(enigma2:2313): GStreamer-WARNING **: External plugin loader failed. This most likely means that the plugin loader helper binary was not found or could not be run. You might need to set the GST_PLUGIN_SCANNER environment variable if your setup is unusual. This should normally not be required though.
PYTHONPATH: /usr/lib/enigma2/python
DVB_API_VERSION 5 DVB_API_VERSION_MINOR 3
ENIGMA2_DEBUG settings: Level=3
[MAIN] executing main
libpng warning: iCCP: known incorrect sRGB profile
libpng warning: iCCP: cHRM chunk does not match sRGB
libpng warning: iCCP: known incorrect sRGB profile
libpng warning: iCCP: cHRM chunk does not match sRGB
<    93.776> :0: UserWarning: You do not have a working installation of the service_identity module: 'No module named service_identity'.  Please install it from <https://pypi.python.org/pypi/service_identity> and make sure all of its dependencies are satisfied.  Without the service_identity module and a recent enough pyOpenSSL to support it, Twisted can perform only rudimentary TLS client hostname verification.  Many valid certificate/hostname mappings may be rejected.
********** end showiframe
VIDEO_SELECT_SOURCE DEMUX (Invalid argument)
killall: showiframe: no process killed

[bonkel]

tffpctl fehlt, ist wohl dafür zuständig, ich schaue das es im nächsten image mit drin is

[bonkel]

image von jetzt testen

[Alex23]

Die Fernbedienung geht, Tuner aber nicht.
Es werden auch keine Plugins im Pluginbrowser angezeigt.
Das Log ist von Start bis Aufruf Pluginbrowser.

ToFiÿ <<< Loader L23231>>>
 “ToFi"Z¿Š¿Z[!p
 

 Board: TF7700  [29-bit mode]
 

 

 

 U-Boot 1.3.1-gfeb9b4b7-dirty (Oct 23 2011 - 12:43:54) - stm23_0043
 

 DRAM:  128 MiB
 NOR:     8 MiB
 In:    serial
 Out:   serial
 Err:   serial
 Hit any key to stop autoboot:  1  0 
 (Re)start USB...
 USB:   scanning bus for devices... 1 USB Device(s) found
        scanning bus for storage devices... 0 Storage Device(s) found
 ** Can't read from device 0 **
 

 ** Unable to use usb 0:1 for fatload **
 ## Booting image at 85000000 ...
 Bad Magic Number
 ## Booting image at 80060000 ...
    Image Name:   Linux-2.6.32.71_stm24_0217
    Image Type:   SuperH Linux Kernel Image (gzip compressed)
    Data Size:    1789348 Bytes =   1.7 MiB
    Load Address: 84001000
    Entry Point:  84002000
    Verifying Checksum ... OK
    Uncompressing Kernel Image ... OK
 

 Starting kernel console=ttyAS0,115200 root=/dev/sda1 rw init=/bin/devinit ip=192.168.178.100:::255.255.255.0:tf7700:eth0:off mem=128m coprocessor_mem=4m@0x10000000,4m@0x10400000 rootdelay=6 nwhwconf=device:eth0,hwaddr:00:3e:9e:53:7d:9e - 0x00000000 - 0 ...
 

 

 INIT: version 2.88 booting
 

 init frontpanel
 fsck.jfs version 1.1.15, 04-Mar-2011
 processing started: 12/4/2016 12:42:51
 The current device is:  /dev/sda3
 

 The superblock does not describe a correct jfs file system.
 

 If device /dev/sda3 is valid and contains a jfs file system,
 then both the primary and secondary superblocks are corrupt
 and cannot be repaired, and fsck cannot continue.
 

 Otherwise, make sure the entered device /dev/sda3 is correct.
 

 [mountvirtfs] Mount /dev in tmpfs
 [mountvirtfs] Copying device nodes to /dev
 Starting portmap daemon....
 Loading autofs
 Starting autofs
 [mountall] Mounting local filesystems...
 Cleaning /tmp.
 Hostname: TOPF.
 init stmfb
 LOADING MODULES
 load firmware
 copLoadFile (file /boot/audio.elf)
 ustslave: Kernel Version: 24
 base_address 0x10400000
 seeking to 0
 seeking to 5f00
 seeking to 12320
 seeking to 1aa20
 seeking to 173100
 seeking to 173138
 seeking to 173170
 seeking to 1b9058
 seeking to 1b9060
 seeking to 1b9068
 seeking to 1b9070
 seeking to 1d0920
 seeking to 1d0a00
 copLoadFile (file /boot/video.elf)
 ustslave: Kernel Version: 24
 base_address 0x10000000
 seeking to 0
 seeking to 1277c0
 seeking to 1277f8
 seeking to 127830
 seeking to 14d558
 seeking to 14d564
 seeking to 14d570
 seeking to 17df30
 seeking to 180000
 init embx
 init AVS
 insmod: /lib/modules/smartcard.ko: module not found
 [mountall] Mounting local filesystems...
 Model: 'tf7700hdpvr'
 vBoxType: 5
 Input device name: "TDT RC event driver"
 Selected Remote: Tf7700 RemoteControl
 RemoteControl Map:
              STANDBY - 0A - 116
                 MUTE - 0C - 113
                 ZOOM - 42 - 372
                VMODE - 43 -  47
                AUDIO - 08 - 392
              0BUTTON - 10 -  11
              1BUTTON - 11 -   2
              2BUTTON - 12 -   3
              3BUTTON - 13 -   4
              4BUTTON - 14 -   5
              5BUTTON - 15 -   6
              6BUTTON - 16 -   7
              7BUTTON - 17 -   8
              8BUTTON - 18 -   9
              9BUTTON - 19 -  10
                 BACK - 1E - 158
                 INFO - 1D - 358
               SEARCH - 05 - 217
             SUBTITLE - 07 - 370
                 TEXT - 47 - 388
              DOWN/P- - 01 - 108
                UP/P+ - 00 - 103
             RIGHT/V+ - 02 - 106
              LEFT/V- - 03 - 105
              OK/LIST - 1F - 352
                 MENU - 1A - 139
                GUIDE - 1B - 365
                 EXIT - 1C - 102
                  FAV - 09 - 364
                  RED - 4D - 398
                GREEN - 0D - 399
               YELLOW - 0E - 400
                 BLUE - 0F - 401
               REWIND - 45 - 168
                PAUSE - 06 - 119
                 PLAY - 46 - 207
          FASTFORWARD - 48 - 208
               RECORD - 4B - 167
                 STOP - 4A - 128
           SLOWMOTION - 49 - 409
           RECORDLIST - 51 - 395
                  SAT - 5E - 381
             STEPBACK - 50 - 412
          STEPFORWARD - 52 - 407
            BOOKMARKS - 4C - 156
             TV/RADIO - 04 - 378
                MEDIA - 40 - 226
                TIMER - 44 - 362
 Frontpanel Map:
          CHANNELDOWN - 02 - 109
            CHANNELUP - 03 - 104
           VOLUMEDOWN - 01 - 114
             VOLUMEUP - 06 - 115
              STANDBY - 0C - 116
 Supports Long KeyPress: 1
 processComplex >
 period 110, delay 10
 Using period=110 delay=10
 [SEM] DOWN
 showSinglePic /boot/bootlogo.mvi
 VIDEO_SELECT_SOURCE MEMORY (Success)
 VIDEO_PLAY (Success)
 VIDEO_CONTINUE: (Success)
 VIDEO_CLEAR_BUFFER: (Invalid argument)
 Deconfiguring network interfaces... done.
 Setting up IP spoofing protection: rp_filter.
 Configuring network interfaces... done.
 [set_was_timer_wakeup] no timer aktiv
 starting e2->
 Simple mixer control 'Analog',0
   Capabilities: pvolume pvolume-joined pswitch pswitch-joined
   Playback channels: Mono
   Limits: Playback -31 - 31
   Mono: Playback 6 [60%] [on]
 Simple mixer control 'SPDIF',0
   Capabilities: pvolume pvolume-joined pswitch pswitch-joined
   Playback channels: Mono
   Limits: Playback -31 - 31
   Mono: Playback 6 [60%] [on]
 Simple mixer control 'HDMI',0
   Capabilities: pvolume pvolume-joined pswitch pswitch-joined
   Playback channels: Mono
   Limits: Playback -31 - 31
   Mono: Playback 6 [60%] [on]
 

 

 (enigma2:2302): GStreamer-WARNING **: External plugin loader failed. This most likely means that the plugin loader helper binary was not found or could not be run. You might need to set the GST_PLUGIN_SCANNER environment variable if your setup is unusual. This should normally not be required though.
 PYTHONPATH: /usr/lib/enigma2/python
 DVB_API_VERSION 5 DVB_API_VERSION_MINOR 3
 ENIGMA2_DEBUG settings: Level=3
 [MAIN] executing main
 libpng warning: iCCP: known incorrect sRGB profile
 libpng warning: iCCP: cHRM chunk does not match sRGB
 libpng warning: iCCP: known incorrect sRGB profile
 libpng warning: iCCP: cHRM chunk does not match sRGB
 <    56.599> :0: UserWarning: You do not have a working installation of the service_identity module: 'No module named service_identity'.  Please install it from <https://pypi.python.org/pypi/service_identity> and make sure all of its dependencies are satisfied.  Without the service_identity module and a recent enough pyOpenSSL to support it, Twisted can perform only rudimentary TLS client hostname verification.  Many valid certificate/hostname mappings may be rejected.
 Model not found
 libpng warning: iCCP: known incorrect sRGB profile
 libpng warning: iCCP: known incorrect sRGB profile
 KEY by code: 8B - MENU
 ****       102541 1 ****
 [SEM] UP
 KEY_PRESS - 8b 1
 ++++            0 ms ++++
 KEY by code: 8B - MENU
 ****           51 1 ****
 ++++           70 ms ++++
 KEY_RELEASE - 8b 00 1 1 CAUSE=Timeout
 ----          122 ms ----
 [SEM] DOWN
 KEY by code: 67 - UP/P+
 ****         1909 2 ****
 [SEM] UP
 KEY_PRESS - 67 2
 ++++            4 ms ++++
 KEY by code: 67 - UP/P+
 ****           47 2 ****
 ++++           76 ms ++++
 KEY_RELEASE - 67 00 2 2 CAUSE=Timeout
 ----          125 ms ----
 [SEM] DOWN
 KEY by code: 67 - UP/P+
 ****          293 3 ****
 [SEM] UP
 KEY_PRESS - 67 3
 ++++            0 ms ++++
 KEY by code: 67 - UP/P+
 ****           52 3 ****
 ++++           71 ms ++++
 KEY_RELEASE - 67 00 3 3 CAUSE=Timeout
 ----          123 ms ----
 [SEM] DOWN
 KEY by code: 67 - UP/P+
 ****          279 4 ****
 [SEM] UP
 KEY_PRESS - 67 4
 ++++            0 ms ++++
 KEY by code: 67 - UP/P+
 ****           52 4 ****
 ++++           72 ms ++++
 KEY_RELEASE - 67 00 4 4 CAUSE=Timeout
 ----          124 ms ----
 [SEM] DOWN
 KEY by code: 160 - OK/LIST
 ****          484 5 ****
 [SEM] UP
 KEY_PRESS - 160 5
 ++++            0 ms ++++
 KEY_RELEASE - 160 00 5 5 CAUSE=Timeout
 ----          123 ms ----
 [SEM] DOWN
 libpng warning: iCCP: known incorrect sRGB profile
 libpng warning: iCCP: known incorrect sRGB profile
 KEY by code: 18F - GREEN
 ****         2984 6 ****
 [SEM] UP
 KEY_PRESS - 18f 6
 ++++            0 ms ++++
 KEY by code: 18F - GREEN
 ****           52 6 ****
 ++++           71 ms ++++
 KEY_RELEASE - 18f 00 6 6 CAUSE=Timeout
 ----          123 ms ----
 [SEM] DOWN

- - - Aktualisiert - - -

Ich habe gerade nochmal weiter getestet. Aufnahmen werden auch nicht wiedergegeben. Mp4-Dateien funktionieren (im Aufnahmebrowser). Mp3s werden aber diesmal mehrere nacheinander abgespielt (im BMC).

[orest]

HDMU 15672 Funktionen Fernbedienung ?