HDMU 16564 geht immer noch nicht !!!

[arrap1968]

Startet bis "BOOT" dann steht Wieder der Bootloader 7.37 im Display (Festanstehend)!!!
Also keine Bootschleife !!

'0¦¦(Re)start USB...
Front USB: scanning bus for devices... 3 USB Device(s) found
scanning bus for storage devices... 1 Storage Device(s) found
system volume information/
262144000 root.img
3012735 uimage
$recycle.bin/

2 file(s), 2 dir(s)
reading uImage
.................................................. .................................................. .................................................. .................................................. .................................................. ............................................
ret=> 3012735
Wait [1]
Wait [2]
Wait [3]
Wait [4]
Wait [5]
Wait [6]
ext2fs_check_if_mount: Can't check if filesystem is mounted due to missing mtab file while determining whether /mnt/root.img is mounted.
/mnt/root.img: clean, 5883/64000 files, 115949/256000 blocks
mount root
INIT: version 2.88 booting
init frontpanel

[bonkel]

dann muss ich den support wohl leider einstellen, ich finde beim bauen keinen fehler bisher....also sollte alles richtig sein

[arrap1968]

Nein ,Das sollte keine Kritik sein !!! Bitte nicht den Suport einstellen !!!
Ich bin mit HDMU zufrieden,und solange nehme Ich sowieso die Firmware:" HDMU_15496_E2_1008g+se+_217_git_4206" bis ihr den Fehler Gefunden habt .
Danke für eure Mühe

[bonkel]

es bringt mir ja nichts images für diese box zu bauen, wenn sie eh nicht gehen.......ich finde wie gesagt kein fehler beim bauen, und das log sagt leider auch zu wenig
das image wird ja erkannt, bis init frontpanel kommt er ja, denke er fliegt bei dem nuvoton.ko raus...wieso weiss ich allerdings nicht, ich bau gleich ein image, mit ner anderen ko

[arrap1968]

HI Bonkel
Jetzt geht es Danke aber im Display Steht "Boot" , aber es läuft

'0¦¦(Re)start USB...
Front USB:   scanning bus for devices... 3 USB Device(s) found
       scanning bus for storage devices... 1 Storage Device(s) found
            system volume information/
            $recycle.bin/
 262144000   root.img
  3012742   uimage

2 file(s), 2 dir(s)

reading uImage
......................................................................................................................................................................................................................................................................................................
ret=> 3012742
Wait [1]
Wait [2]
Wait [3]
Wait [4]
Wait [5]
Wait [6]
ext2fs_check_if_mount: Can't check if filesystem is mounted due to missing mtab file while determining whether /mnt/root.img is mounted.
/mnt/root.img: clean, 5883/64000 files, 115948/256000 blocks
mount root
INIT: version 2.88 booting
init frontpanel
WAIT 1 min
mknod: /dev/avs: File exists
mknod: /dev/fuse: File exists
[mountvirtfs] Mount /dev in tmpfs
[mountvirtfs] Copying device nodes to /dev
Starting portmap daemon....
Loading autofs
Starting autofs
[mountall] Mounting local filesystems...
mount: mounting LABEL=RECORD on /hdd failed: No such file or directory
Cleaning /tmp /var/run /var/lock.
Hostname: 1008G+SE+.
init stmfb
LOADING MODULES
load firmware
copLoadFile (file /boot/audio.elf)
ustslave: Kernel Version: 24
base_address 0x40400000
seeking to 0
seeking to 5e00
seeking to 12460
seeking to 1ab60
seeking to 154300
seeking to 154338
seeking to 154370
seeking to 191a58
seeking to 191a60
seeking to 191a68
seeking to 191a70
seeking to 1aae40
seeking to 1aaf00
copLoadFile (file /boot/video.elf)
ustslave: Kernel Version: 24
base_address 0x40000000
seeking to 0
seeking to 60980
seeking to 148478
seeking to 1484b0
seeking to 1484e8
seeking to 158858
seeking to 158864
seeking to 158880
seeking to 184d94
seeking to 186e00
init embx
init AVS
skip mpeg2
Model: 'hs7819'
vBoxType: 8
Input device name: "TDT RC event driver"
Selected Remote: Fortis RemoteControl
RemoteControl Map:
                MENU - 04 - 139
                 RED - 4B - 398
               GREEN - 4A - 399
              YELLOW - 49 - 400
                BLUE - 48 - 401
                EXIT - 1C - 174
                TEXT - 0D - 388
                 EPG - 08 - 365
              REWIND - 58 - 168
         FASTFORWARD - 5C - 208
                PLAY - 55 - 207
               PAUSE - 07 - 119
              RECORD - 56 - 167
                STOP - 54 - 128
             STANDBY - 0A - 116
                MUTE - 0C - 113
           CHANNELUP - 5E - 104
         CHANNELDOWN - 5F - 109
            VOLUMEUP - 4E - 115
          VOLUMEDOWN - 4F - 114
                INFO - 06 - 358
                  OK - 1F - 352
                  UP - 00 - 103
               RIGHT - 02 - 106
                DOWN - 01 - 108
                LEFT - 03 - 105
                BACK - 09 - 158
                ZOOM - 0B - 372
               VMODE - 0E -  47
          RESOLUTION - 0F - 393
             TVRADIO - 1A - 378
               SLEEP - 1E - 142
                OPEN - 40 - 361
                 FAV - 41 - 364
               TIMER - 42 - 362
                UPUP - 43 - 414
            DOWNDOWN - 44 - 415
                NEXT - 4C - 407
                LAST - 50 - 412
                 PIP - 51 - 375
               MEDIA - 52 - 226
                LIST - 53 - 395
             0BUTTON - 10 -  11
             1BUTTON - 11 -   2
             2BUTTON - 12 -   3
             3BUTTON - 13 -   4
             4BUTTON - 14 -   5
             5BUTTON - 15 -   6
             6BUTTON - 16 -   7
             7BUTTON - 17 -   8
             8BUTTON - 18 -   9
             9BUTTON - 19 -  10
Frontpanel Map:
             STANDBY - 00 - 116
                  OK - 06 - 352
                MENU - 05 - 139
            VOLUMEUP - 03 - 115
          VOLUMEDOWN - 04 - 114
           CHANNELUP - 01 - 104
         CHANNELDOWN - 02 - 109
Supports Long KeyPress: 1
processComplex >
period 10, delay 120
Using period=10 delay=120
[SEM] DOWN
[mountall] Mounting local filesystems...
showSinglePic /boot/bootlogo.mvi
VIDEO_SELECT_SOURCE MEMORY (Success)
VIDEO_PLAY (Success)
VIDEO_CONTINUE: (Success)
VIDEO_CLEAR_BUFFER: (Invalid argument)
Deconfiguring network interfaces... ifdown: interface lo not configured
ifdown: interface eth0 not configured
ifdown: interface wlan0 not configured
done.
Setting up IP spoofing protection: rp_filter.
Configuring network interfaces... udhcpc: started, v1.26.2
udhcpc: sending discover
mount: mounting LABEL=RECORD on /hdd failed: No such file or directory
udhcpc: sending select for 192.168.178.109
udhcpc: lease of 192.168.178.109 obtained, lease time 864000
route: SIOCDELRT: No such process
adding dns 192.168.178.1
ifconfig: SIOCGIFFLAGS: No such device
done.
[set_was_timer_wakeup] error reading /etc/enigma2/timers.xml
[set_was_timer_wakeup] no timer aktiv
Invalid card number.
Usage: amixer <options> command

Available options:
  -h,--help       this help
  -c,--card N     select the card
  -D,--device N   select the device, default 'default'
  -d,--debug      debug mode
  -n,--nocheck    do not perform range checking
  -v,--version    print version of this program
  -q,--quiet      be quiet
  -i,--inactive   show also inactive controls
  -a,--abstract L select abstraction level (none or basic)

Available commands:
  scontrols       show all mixer simple controls
Invalid card number.
Usage: amixer <options> command

Available options:
  -h,--help       this help
  -c,--card N     select the card
  -D,--device N   select the device, default 'default'
  -d,--debug      debug mode
  -n,--nocheck    do not perform range checking
  -v,--version    print version of this program
  -q,--quiet      be quiet
  -i,--inactive   show also inactive controls
  -a,--abstract L select abstraction level (none or basic)

Available commands:
  scontrols       show all mixer simple controls
  scontents       show contents of all mixer simple controls (default command)
  sset sID P      set contents for one mixer simple control
  sget sID        get contents for one mixer simple control
  controls        show all controls for given card
  contents        show contents of all controls for given card
  cset cID P      set control contents for one control
  cget cID        get control contents for one control
  scontents       show contents of all mixer simple controls (default command)
  sset sID P      set contents for one mixer simple control
  sget sID        get contents for one mixer simple control
  controls        show all controls for given card
  contents        show contents of all controls for given card
  cset cID P      set control contents for one control
  cget cID        get control contents for one control
Invalid card number.
Usage: amixer <options> command

Available options:
  -h,--help       this help
  -c,--card N     select the card
  -D,--device N   select the device, default 'default'
  -d,--debug      debug mode
  -n,--nocheck    do not perform range checking
  -v,--version    print version of this program
  -q,--quiet      be quiet
  -i,--inactive   show also inactive controls
  -a,--abstract L select abstraction level (none or basic)

Available commands:
  scontrols       show all mixer simple controls
  scontents       show contents of all mixer simple controls (default command)
  sset sID P      set contents for one mixer simple control
  sget sID        get contents for one mixer simple control
  controls        show all controls for given card
  contents        show contents of all controls for given card
  cset cID P      set control contents for one control
  cget cID        get control contents for one control
starting e2->
rm: can't remove '/media/USB/SWAPPART': No such file or directory
rm: can't remove '/media/USB/Record': No such file or directory

(enigma2:2059): GStreamer-WARNING **: External plugin loader failed. This most likely means that the plugin loader helper binary was not found or could not be run. You might need to set the GST_PLUGIN_SCANNER environment variable if your setup is unusual. This should normally not be required though.
mount: mounting LABEL=RECORD on /hdd failed: No such file or directory
PYTHONPATH: /usr/lib/enigma2/python
DVB_API_VERSION 5 DVB_API_VERSION_MINOR 3
ENIGMA_DEBUG_LVL=3
[MAIN] executing main
no profile data available
libpng warning: iCCP: known incorrect sRGB profile
libpng warning: iCCP: cHRM chunk does not match sRGB
libpng warning: iCCP: known incorrect sRGB profile
libpng warning: iCCP: cHRM chunk does not match sRGB
KEY by code: 67 - UP
****        66671 1 ****

[vISIOn]

Hast ne PN

Gruß

[arrap1968]

Habe es Getestet . Steht immer noch "BOOT" im display aber läuft !!!!

'0▒▒(Re)start USB...
Front USB:   scanning bus for devices... 3 USB Device(s) found
       scanning bus for storage devices... 1 Storage Device(s) found
            system volume information/
            $recycle.bin/
 262144000   root.img
  3012742   uimage

2 file(s), 2 dir(s)

reading uImage
......................................................................................................................................................................................................................................................................................................
ret=> 3012742
Wait [1]
Wait [2]
Wait [3]
Wait [4]
Wait [5]
Wait [6]
ext2fs_check_if_mount: Can't check if filesystem is mounted due to missing mtab file while determining whether /mnt/root.img is mounted.
/mnt/root.img: clean, 8753/64000 files, 144361/256000 blocks
mount root
INIT: version 2.88 booting
init frontpanel
insmod: can't insert '/lib/modules/nuvoton.ko': invalid module format
[mountvirtfs] Mount /dev in tmpfs
[mountvirtfs] Copying device nodes to /dev
Starting portmap daemon....
Loading autofs
Starting autofs
[mountall] Mounting local filesystems...
mount: mounting LABEL=RECORD on /hdd failed: No such file or directory
Cleaning /tmp.
Hostname: 1008G+SE+.
init stmfb
/etc/init.d/rcS: line 667: can't create /dev/vfd: No such device or address
LOADING MODULES
load firmware
copLoadFile (file /boot/audio.elf)
ustslave: Kernel Version: 24
base_address 0x40400000
seeking to 0
seeking to 5e00
seeking to 12460
seeking to 1ab60
seeking to 154300
seeking to 154338
seeking to 154370
seeking to 191a58
seeking to 191a60
seeking to 191a68
seeking to 191a70
seeking to 1aae40
seeking to 1aaf00
copLoadFile (file /boot/video.elf)
ustslave: Kernel Version: 24
base_address 0x40000000
seeking to 0
seeking to 60980
seeking to 148478
seeking to 1484b0
seeking to 1484e8
seeking to 158858
seeking to 158864
seeking to 158880
seeking to 184d94
seeking to 186e00
init embx
init AVS
skip mpeg2
Model: 'hs7819'
vBoxType: 8
Input device name: "TDT RC event driver"
Selected Remote: Fortis RemoteControl
RemoteControl Map:
                MENU - 04 - 139
                 RED - 4B - 398
               GREEN - 4A - 399
              YELLOW - 49 - 400
                BLUE - 48 - 401
                EXIT - 1C - 174
                TEXT - 0D - 388
                 EPG - 08 - 365
              REWIND - 58 - 168
         FASTFORWARD - 5C - 208
                PLAY - 55 - 207
               PAUSE - 07 - 119
              RECORD - 56 - 167
                STOP - 54 - 128
             STANDBY - 0A - 116
                MUTE - 0C - 113
           CHANNELUP - 5E - 104
         CHANNELDOWN - 5F - 109
            VOLUMEUP - 4E - 115
          VOLUMEDOWN - 4F - 114
                INFO - 06 - 358
                  OK - 1F - 352
                 UP - 00 - 103
               RIGHT - 02 - 106
                DOWN - 01 - 108
                LEFT - 03 - 105
                BACK - 09 - 158
                ZOOM - 0B - 372
               VMODE - 0E -  47
          RESOLUTION - 0F - 393
             TVRADIO - 1A - 378
               SLEEP - 1E - 142
                OPEN - 40 - 361
                 FAV - 41 - 364
               TIMER - 42 - 362
                UPUP - 43 - 414
            DOWNDOWN - 44 - 415
                NEXT - 4C - 407
                LAST - 50 - 412
                 PIP - 51 - 375
               MEDIA - 52 - 226
                LIST - 53 - 395
             0BUTTON - 10 -  11
             1BUTTON - 11 -   2
             2BUTTON - 12 -   3
             3BUTTON - 13 -   4
             4BUTTON - 14 -   5
             5BUTTON - 15 -   6
             6BUTTON - 16 -   7
             7BUTTON - 17 -   8
             8BUTTON - 18 -   9
             9BUTTON - 19 -  10
Frontpanel Map:
             STANDBY - 00 - 116
                  OK - 06 - 352
                MENU - 05 - 139
            VOLUMEUP - 03 - 115
          VOLUMEDOWN - 04 - 114
           CHANNELUP - 01 - 104
         CHANNELDOWN - 02 - 109
Supports Long KeyPress: 1
processComplex >
[mountall] Mounting local filesystems...
showSinglePic /boot/bootlogo.mvi
VIDEO_SELECT_SOURCE MEMORY (Success)
VIDEO_PLAY (Success)
VIDEO_CONTINUE: (Success)
VIDEO_CLEAR_BUFFER: (Invalid argument)
period 10, delay 120
error in device initialization
Deconfiguring network interfaces... done.
Setting up IP spoofing protection: rp_filter.
Configuring network interfaces... done.
mount: mounting LABEL=RECORD on /hdd failed: No such file or directory
[set_was_timer_wakeup] no timer aktiv
/usr/emu/oscam11198: invalid option -- 'b'
ERROR: Unknown command line parameter: -b
Invalid card number.
Usage: amixer <options> command

Available options:
  -h,--help       this help
  -c,--card N     select the card
  -D,--device N   select the device, default 'default'
  -d,--debug      debug mode
  -n,--nocheck    do not perform range checking
  -v,--version    print version of this program
  -q,--quiet      be quiet
  -i,--inactive   show also inactive controls
  -a,--abstract L select abstraction level (none or basic)

Available commands:
  scontrols       show all mixer simple controls
  scontents       show contents of all mixer simple controls (default command)
  sset sID P      set contents for one mixer simple control
  sget sID        get contents for one mixer simple control
  controls        show all controls for given card
  contents        show contents of all controls for given card
  cset cID P      set control contents for one control
  cget cID        get control contents for one control
Invalid card number.
Invalid card number.
Usage: amixer <options> command

Available options:
co -h,--help       this help
  -c,--card N     select the card
  -D,--device N   select the device, default 'default'
  -d,--debug      debug mode
  -n,--nocheck    do not perform range checking
  -v,--version    print version of this program
  -q,--quiet      be quiet
  -i,--inactive   show also inactive controls
  -a,--abstract L select abstraction level (none or basic)

Available commands:
  scontrols       show all mixer simple controls
  scontents       show contents of all mixer simple controls (default command)
  sset sID P      set contents for one mixer simple control
  sget sID        get contents for one mixer simple control
  controls        show all controls for given card
  contents        show contents of all controls for given card
  cset cID P      set control contents for one control
  cget cID        get control contents for one control
Usage: amixer <options> command

Available options:
  -h,--help       this help
  -c,--card N     select the card
  -D,--device N   select the device, default 'default'
  -d,--debug      debug mode
  -n,--nocheck    do not perform range checking
  -v,--version    print version of this program
  -q,--quiet      be quiet
  -i,--inactive   show also inactive controls
  -a,--abstract L select abstraction level (none or basic)

Available commands:
  scontrols       show all mixer simple controls
  scontents       show contents of all mixer simple controls (default command)
  sset sID P      set contents for one mixer simple control
  sget sID        get contents for one mixer simple control
  controls        show all controls for given card
  contents        show contents of all controls for given card
  cset cID P      set control contents for one control
  cget cID        get control contents for one control
/etc/init.d/rcS: line 667: can't create /dev/vfd: No such device or address
starting e2->

(enigma2:2072): GStreamer-WARNING **: External plugin loader failed. This most likely means that the plugin loader helper binary was not found or could not be run. You might need to set the GST_PLUGIN_SCANNER environment variable if your setup is unusual. This should normally not be required though.
mount: mounting LABEL=RECORD on /hdd failed: No such file or directory
PYTHONPATH: /usr/lib/enigma2/python
DVB_API_VERSION 5 DVB_API_VERSION_MINOR 3
ENIGMA_DEBUG_LVL=3
[MAIN] executing main
libpng warning: iCCP: known incorrect sRGB profile
Cannot open /dev/vfd
No such device or address
Set compatibility mode: Bad file descriptor
Set VFD brightness: Bad file descriptor
TuxTxt cache cleared
TuxTxt cache cleared
TuxTxt: initialized
TuxTxt service started 17f2
[eDVBPESReader] Created. Opening demux
[eDVBPESReader] Created. Opening demux
TuxTxt running thread...(17f2)

Nachtrag : Die Fernbedienung geht nicht mehr !!!!!!!

[vISIOn]

Ja nimm mal gerade erst die alte ko... muss mir das noch mal anschauen.Meine ko passt nicht die ich geschickt habe.

Schaue noch mal

[bonkel]

neustes image testen....

[spartak73]

neustes image testen....

Geht nicht. Nach dem einschalten kommt Boot im Display, danach wieder LD 7.37

'1▒(Re)start USB...
Front USB:   scanning bus for devices... 3 USB Device(s) found
       scanning bus for storage devices... 1 Storage Device(s) found
            system volume information/
            intel_mei_10.0.27.1012/
            $recycle.bin/
 19388592   kmstools.exe
            programs/
            windows.loader.v2.2.2/
            >20o ?0?:0/
            >20o ?0?:0 (2)/
 262144000   root.img
  3012742   uimage
            ./
            ../
       12   wpsettings.dat
       76   indexervolumeguid

5 file(s), 9 dir(s)

reading uImage
......................................................................................................................................................................................................................................................................................................
ret=> 3012742
Wait [1]
Wait [2]
Wait [3]
Wait [4]
Wait [5]
Wait [6]
ext2fs_check_if_mount: Can't check if filesystem is mounted due to missing mtab file while determining whether /mnt/root.img is mounted.
/mnt/root.img: clean, 5883/64000 files, 115949/256000 blocks
mount root
INIT: version 2.88 booting
init frontpanel

Vorherige Image war besser...