Seite 2 von 2 ErsteErste 12
Ergebnis 11 bis 16 von 16
  1. #11
    Erfahrener Benutzer
    Registriert seit
    31.10.2013
    Beiträge
    214
    Thanks
    54
    Thanked 17 Times in 14 Posts
    Wäre wohl schön zu wissen. Mein Spark hat immer diesen Fehler. Kann ja auch elektronisch sein, Brauch ich das Teil nicht auf zu schrauben . Habe gestern schon mein Fernseher repariert. Eine reicht! Demnächst kann ich auch wieder testen. Habe mein Netzwerk wieder im griff. Scheiß Quallcom/Atheros WiFi!
    .


  2. #12
    Benutzer
    Registriert seit
    02.01.2013
    Ort
    Berlin, Germany
    Beiträge
    39
    Thanks
    28
    Thanked 2 Times in 2 Posts
    Also ich habe jetzt das Image 17311 auf der einen UFS913 auf der anderen ist noch 16594. Bisher läuft alles sehr gut. Im Menü ist noch eine Doppelzeile. Ich konnte bisher nur einen Tunnig -Fehler feststellen jedoch nur bei einem Sender. Ich denke daher, dass es eine falsche Einstellung bei mir ist - der Fehler ist nur bei ZDF-neo HD. Danke


  3. #13
    Neuer Benutzer
    Registriert seit
    02.11.2013
    Beiträge
    21
    Thanks
    6
    Thanked 0 Times in 0 Posts
    Hello ,Thanks for last image 17313 ,tried in IPBOX910 .
    What I cannot see is the menu for setting up the record path .
    In the past images we had the chance to set up the path ,currently not .
    Can you improve this ?
    Thanks .


  4. #14
    Benutzer
    Registriert seit
    16.01.2018
    Beiträge
    38
    Thanks
    5
    Thanked 3 Times in 3 Posts
    Zitat Zitat von FrankBB2702 Beitrag anzeigen
    Also ich habe jetzt das Image 17311 auf der einen UFS913 [...] Im Menü ist noch eine Doppelzeile.
    Die Doppelzeile ist bei der 17313 weg.
    Kathrein UFS 913 mit HDMU_17313_E2_ufs913_217_git_614_nodebug_mix_Flash


  5. #15
    Moderator Avatar von morly
    Registriert seit
    15.07.2012
    Ort
    Österreich
    Beiträge
    6.684
    Thanks
    789
    Thanked 2.751 Times in 1.356 Posts
    Zitat Zitat von technomate Beitrag anzeigen
    Hello ,Thanks for last image 17313 ,tried in IPBOX910 .
    What I cannot see is the menu for setting up the record path .
    In the past images we had the chance to set up the path ,currently not .
    Can you improve this ?
    Thanks .
    did u switch to expert settings (menu)?
    "Every Setback is a Set Up for a Comeback"


  6. #16
    Neuer Benutzer
    Registriert seit
    23.08.2017
    Ort
    Cairo, Egypt
    Beiträge
    6
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Hi Morly, very nice to contact you regarding your ingenuity for development of apps.

    I have a receiver called Truman it is Spark sti7162 sh4.
    When I connect LAN cable and USB wifi stick the WiFi shows green, however, does not pickup IP
    and I will have a network connection. When I remove the cable the network does not work!
    I configured the wlan to rt5370sta. Why the test of USB WiFi stick shows that the driver is rt2870?
    If I try wlan rt2870 it does not recognize the WiFi. Thank you for your assistance.

    The following are the specs and output from Telnet:

    Description: 802.11n Wireless LAN Card (Ralink 802.11n WLAN)
    Device Type: Vendor Specific
    Protocal Version: USB 2.00
    Current Speed: High Speed
    Max Current: 450mA
    USB Device ID: VID = 148F PID = 5370
    Serial Number: 1.0
    Device Vendor: Ralink
    Device Name: 802.11n WLAN
    Device Revision: 0101
    Controller Vendor: Ralink
    Controller Part Number: RT5370

    cat / proc / bus / usb / devices :

    T: Bus = 04 Lev = 00 Prnt = 00 Port = 00 Cnt = 00 Dev # = 1 Spd = 12 MxCh = 1
    B: Alloc = 0/900 us (0%), # Int = 0, # Iso = 0
    D: Ver = 1.10 Cls = 09 (hub) Sub = 00 Prot = 00 MxPS = 64 # Cfgs = 1
    P: Vendor = 1d6b ProdID = 0001 Rev = 2.06
    S: Manufacturer = Linux 2.6.32.71_stm24_0217 ohci_hcd
    S: Product = STMicroelectronics OHCI Host Controller
    S: SerialNumber = stm-ohci.1
    C: * # Ifs = 1 Cfg # = 1 Atr = e0 MxPwr = 0mA
    I: * If # = 0 Alt = 0 # EPs = 1 Cls = 09 (hub) Sub = 00 Prot = 00 Driver = stroke
    E: Ad = 81 (I) Atr = 03 (Int.) MxPS = 2 Ivl = 255ms

    T: Bus = 03 Lev = 00 Prnt = 00 Port = 00 Cnt = 00 Dev # = 1 Spd = 480 MxCh = 1
    B: Alloc = 0 / 800 μs (0%), # Int = 0, # Iso = 0
    D: Ver = 2.00 Cls = 09 (hub) Sub = 00 Prot = 00 MxPS = 64 # Cfgs = 1
    P: Vendor = 1d6b ProdID = 0002 Rev = 2.06
    S: Manufacturer = Linux 2.6.32.71_stm24_0217 ehci_hcd
    S: Product = STMicroelectronics EHCI Host Controller
    S: SerialNumber = stm-ehci.1
    C: * # Ifs = 1 Cfg # = 1 Atr = e0 MxPwr = 0mA
    I: * If # = 0 Alt = 0 # EPs = 1 Cls = 09 (hub) Sub = 00 Prot = 00 Driver = Stroke
    E: Ad = 81 (I) Atr = 03 (Int.) MxPS = 4 Ivl = 256ms

    T: Bus = 03 Lev = 01 Prnt = 01 Port = 00 Cnt = 01 Dev # = 2 Spd = 480 MxCh = 0
    D: Ver = 2.00 Cls = 00 (> ifc) Sub = 00 Prot = 00 MxPS = 64 # Cfgs = 1
    P: Vendor = abcd ProdID = 1234 Rev = 1.00
    S: Manufacturer = General
    S: Product =
    S: SerialNumber = Р ‰
    C: * # Ifs = 1 Cfg # = 1 Atr = 80 MxPwr = 100mA
    I: * If # = 0 Alt = 0 # EPs = 2 Cls = 08 (stor.) Sub = 06 Prot = 50 Driver = usb-storage
    E: Ad = 01 (O) Atr = 02 (Bulk) MxPS = 512 Ivl = 0ms
    E: Ad = 81 (I) Atr = 02 (bulk) MxPS = 512 Ivl = 0ms

    T: Bus = 02 Lev = 00 Prnt = 00 port = 00 Cnt = 00 Dev # = 1 Spd = 12 MxCh = 1
    B: Alloc = 0/900 μs (0%), # Int = 0, # Iso = 0
    D : Ver = 1.10 Cls = 09 (hub) Sub = 00 Prot = 00 MxPS = 64 # Cfgs = 1
    P: Vendor = 1d6b ProdID = 0001 Rev = 2.06
    S: Manufacturer = Linux 2.6.32.71_stm24_0217 ohci_hcd
    S: Product = STMicroelectronics OHCI Host Controller
    S: SerialNumber = stm-ohci.0
    C: * # Ifs = 1 Cfg # = 1 Atr = e0 MxPwr = 0mA
    I: * If # = 0 Alt = 0 # EPs = 1 Cls = 09 (hub) Sub = 00 Prot = 00 Driver = stroke
    E: Ad = 81 (I) Atr = 03 (Int.) MxPS = 2 Ivl = 255ms

    T: Bus = 01 Lev = 00 Prnt = 00 Port = 00 Cnt = 00 Dev # = 1 Spd = 480 MxCh = 1
    B: Alloc = 0/800 μs (0%), # Int = 0, # Iso = 0
    D: Ver = 2.00 Cls = 09 (hub) Sub = 00 Prot = 00 MxPS = 64 # Cfgs = 1
    P: Vendor = 1d6b ProdID = 0002 Rev = 2.06
    S: Manufacturer = Linux 2.6.32.71_stm24_0217 ehci_hcd
    S: Product = STMicroelectronics EHCI Host Controller
    S: SerialNumber = stm-ehci.0
    C: * #Ifs = 1 Cfg # = 1 Atr = e0 MxPwr = 0mA
    I: * If # = 0 Alt = 0 # EPs = 1 Cls = 09 (hub) Sub = 00 Prot = 00 Driver = stroke
    E: Ad = 81 (I) Atr = 03 (Int.) MxPS = 4 Ivl = 256ms

    T: Bus = 01 Lev = 01 Prnt = 01 Port = 00 Cnt = 01 Dev # = 2 Spd = 480 MxCh = 0
    D: Ver = 2.00 Cls = 00 (> ifc) Sub = 00 Prot = 00 MxPS = 64 #Cfgs = 1
    P: Vendor = 148f ProdID = 5370 Rev = 1.01
    S: Manufacturer = Ralink
    S: Product =
    802.11n WLAN S: SerialNumber = 1.0
    C: * # Ifs = 1 Cfg # = 1 Atr = 80 MxPwr = 450mA
    I: * If # = 0 Alt = 0 # EPs = 7 Cls = ff (vend.) Sub = ff Prot = ff Driver = rt2870
    E: Ad = 81 (I) Atr = 02 (Bulk) MxPS = 512 Ivl = 0ms
    E: Ad = 01 (O) Atr = 02 (Bulk) MxPS = 512 Ivl = 0ms
    E: Ad = 02 (O) Atr = 02 (Bulk) MxPS = 512 Ivl = 0ms
    E: Ad = 03 (O) Atr = 02 (Bulk) MxPS = 512 Ivl = 0ms
    E: Ad = 04 (O) Atr = 02 (Bulk) MxPS = 512 Ivl = 0ms
    E: Ad = 05 (O) Atr = 02 (Bulk) MxPS = 512 Ivl = 0ms
    E: Ad = 06 (O) Atr = 02 (Bulk) MxPS = 512 Ivl = 0ms
    lsusb:
    Bus 001 Device 001: ID 1d6b: 0002
    Bus 002 Device 001: ID 1d6b: 0001
    Bus 003 Device 001: ID 1d6b: 0002
    Bus 004 Device 001: ID 1d6b: 0001
    Bus 001 Device 002: ID 148f: 5370
    Bus 003 Device 004: ID abcd: 1234
    Geändert von zakn (In den letzten 3 Wochen um 16:29 Uhr)


Berechtigungen

  • Neue Themen erstellen: Nein
  • Themen beantworten: Nein
  • Anhänge hochladen: Nein
  • Beiträge bearbeiten: Nein
  •