Hi, Gerade getestet !!
Stürtzt bei Einstellassi ab , bei einstellung - HDMI
Code:'0▒▒(Re)start USB... Front USB: scanning bus for devices... 3 USB Device(s) found scanning bus for storage devices... 1 Storage Device(s) found system volume information/ $recycle.bin/ 262144000 root.img 3012748 uimage 2 file(s), 2 dir(s) reading uImage ...................................................................................................................................................................................................................................................................................................... ret=> 3012748 Wait [1] Wait [2] Wait [3] Wait [4] Wait [5] Wait [6] ext2fs_check_if_mount: Can't check if filesystem is mounted due to missing mtab file while determining whether /mnt/root.img is mounted. /mnt/root.img: clean, 6201/64000 files, 122618/256000 blocks mount root INIT: version 2.88 booting init frontpanel WAIT 1 min mknod: /dev/avs: File exists mknod: /dev/fuse: File exists [mountvirtfs] Mount /dev in tmpfs [mountvirtfs] Copying device nodes to /dev Starting portmap daemon.... Loading autofs Starting autofs [mountall] Mounting local filesystems... mount: mounting LABEL=RECORD on /hdd failed: No such file or directory Cleaning /tmp /var/run /var/lock. Hostname: 1008G+SE+. init stmfb LOADING MODULES load firmware copLoadFile (file /boot/audio.elf) ustslave: Kernel Version: 24 base_address 0x40400000 copLoadFile (file /boot/video.elf) ustslave: Kernel Version: 24 base_address 0x40000000 init embx init AVS skip mpeg2 [evremote2] Model: 'hs7429' [evremote2] vBoxType: 8 (hs7429) [evremote2] Input device name: "TDT RC event driver" [evremote2] Remote selected: Fortis RemoteControl [evremote2] RemoteControl Map: Keyname Keyword KeyCode -------------------------------------- MENU - 04 - 139 RED - 4B - 398 GREEN - 4A - 399 YELLOW - 49 - 400 BLUE - 48 - 401 EXIT - 1C - 174 TEXT - 0D - 388 EPG - 08 - 365 REWIND - 58 - 168 FASTFORWARD - 5C - 208 PLAY - 55 - 207 PAUSE - 07 - 119 RECORD - 56 - 167 STOP - 54 - 128 STANDBY - 0A - 116 MUTE - 0C - 113 CHANNELUP - 5E - 104 CHANNELDOWN - 5F - 109 VOLUMEUP - 4E - 115 VOLUMEDOWN - 4F - 114 INFO - 06 - 358 OK - 1F - 352 [mountall] Mounting local filesystems... UP - 00 - 103 RIGHT - 02 - 106 DOWN - 01 - 108 LEFT - 03 - 105 BACK - 09 - 158 ZOOM - 0B - 372 VMODE - 0E - 47 RESOLUTION - 0F - 393 TVRADIO - 1A - 378 SLEEP - 1E - 142 OPEN - 40 - 361 FAV - 41 - 364 TIMER - 42 - 362 UPUP - 43 - 414 DOWNDOWN - 44 - 415 NEXT - 4C - 407 LAST - 50 - 412 PIP - 51 - 375 MEDIA - 52 - 226 LIST - 53 - 395 0BUTTON - 10 - 11 1BUTTON - 11 - 2 2BUTTON - 12 - 3 3BUTTON - 13 - 4 4BUTTON - 14 - 5 5BUTTON - 15 - 6 6BUTTON - 16 - 7 7BUTTON - 17 - 8 8BUTTON - 18 - 9 9BUTTON - 19 - 10 -------------------------------------- [evremote2] Frontpanel Map: Keyname Keyword KeyCode -------------------------------------- STANDBY - 00 - 116 OK - 06 - 352 MENU - 05 - 139 VOLUMEUP - 03 - 115 VOLUMEDOWN - 04 - 114 CHANNELUP - 01 - 104 CHANNELDOWN - 02 - 109 -------------------------------------- [evremote2] Supports Long KeyPress: yes [evremote2 fortis] Period = 10, delay = 120 [evremote2] Using period = 10 delay = 120 showSinglePic /boot/bootlogo.mvi VIDEO_SELECT_SOURCE MEMORY (Success) VIDEO_PLAY (Success) VIDEO_CONTINUE: (Success) VIDEO_CLEAR_BUFFER: (Invalid argument) Deconfiguring network interfaces... ifdown: interface lo not configured ifdown: interface eth0 not configured ifdown: interface eth1 not configured ifdown: interface wlan0 not configured done. Setting up IP spoofing protection: rp_filter. Configuring network interfaces... mount: mounting LABEL=RECORD on /hdd failed: No such file or directory udhcpc: started, v1.28.0 udhcpc: sending discover [set_was_timer_wakeup] error reading /etc/enigma2/timers.xml [set_was_timer_wakeup] no timer aktiv /usr/bin/amixer: /usr/lib/libasound.so.2: no version information available (required by /usr/bin/amixer) /usr/bin/amixer: /usr/lib/libasound.so.2: no version information available (required by /usr/bin/amixer) /usr/bin/amixer: /usr/lib/libasound.so.2: no version information available (required by /usr/bin/amixer) Invalid card number. Invalid card number. Usage: amixer <options> command Available options: -h,--help this help -c,--card N select the card -D,--device N select the device, default 'default' -d,--debug debug mode -n,--nocheck do not perform range checking -v,--version print version of this program -q,--quiet be quiet -i,--inactive show also inactive controls -a,--abstract L select abstraction level (none or basic) Available commands: scontrols show all mixer simple controls scontents show contents of all mixer simple controls (default command) sset sID P set contents for one mixer simple control sget sID get contents for one mixer simple control controls show all controls for given card contents show contents of all controls for given card cset cID P set control contents for one control cget cID get control contents for one control Invalid card number. Usage: amixer <options> command Available options: -h,--help this help -c,--card N select the card -D,--device N select the device, default 'default' -d,--debug debug mode -n,--nocheck do not perform range checking -v,--version print version of this program -q,--quiet be quiet -i,--inactive show also inactive controls -a,--abstract L select abstraction level (none or basic) Available commands: scontrols show all mixer simple controls scontents show contents of all mixer simple controls (default command) sset sID P set contents for one mixer simple control sget sID get contents for one mixer simple control controls show all controls for given card contents show contents of all controls for given card cset cID P set control contents for one control cget cID get control contents for one control Usage: amixer <options> command Available options: -h,--help this help -c,--card N select the card -D,--device N select the device, default 'default' -d,--debug debug mode -n,--nocheck do not perform range checking -v,--version print version of this program -q,--quiet be quiet -i,--inactive show also inactive controls -a,--abstract L select abstraction level (none or basic) Available commands: scontrols show all mixer simple controls scontents show contents of all mixer simple controls (default command) sset sID P set contents for one mixer simple control sget sID get contents for one mixer simple control controls show all controls for given card contents show contents of all controls for given card cset cID P set control contents for one control cget cID get control contents for one control starting e2-> udhcpc: sending select for 192.168.178.142 udhcpc: lease of 192.168.178.142 obtained, lease time 864000 route: SIOCDELRT: No such process adding dns 192.168.178.1 ip: SIOCGIFFLAGS: No such device ip: SIOCGIFFLAGS: No such device done. rm: can't remove '/media/USB/SWAPPART': No such file or directory rm: can't remove '/media/USB/Record': No such file or directory mount: mounting LABEL=RECORD on /hdd failed: No such file or directory PYTHONPATH: /usr/lib/enigma2/python DVB_API_VERSION 5 DVB_API_VERSION_MINOR 3 ENIGMA_DEBUG_LVL=3 [MAIN] executing main no profile dataavailable libpng warning: iCCP: known incorrect sRGB profile libpng warning: iCCP: cHRM chunk does not match sRGB libpng warning: iCCP: known incorrect sRGB profile libpng warning: iCCP: cHRM chunk does not match sRGB [evremote2] KEY by code: 67 (UP) [evremote2] KEY_PRESS - 67 1 [evremote2] KEY by code: 67 (UP) [evremote2] KEY_RELEASE - 67 gKeycode=00 nextKey=01 gNextKey=01 CAUSE: Timeout [evremote2] KEY by code: 67 (UP) [evremote2] KEY_PRESS - 67 1 [evremote2] KEY by code: 67 (UP) [evremote2] KEY_RELEASE - 67 gKeycode=00 nextKey=01 gNextKey=01 CAUSE: Timeout [evremote2] KEY by code: 160 (OK) [evremote2] KEY_PRESS - 160 1 [evremote2] KEY by code: 160 (OK) [evremote2] KEY_RELEASE - 160 gKeycode=00 nextKey=01 gNextKey=01 CAUSE: Timeout [evremote2] KEY by code: 6C (DOWN) [evremote2] KEY_PRESS - 6C 1 [evremote2] KEY by code: 6C (DOWN) [evremote2] KEY_RELEASE - 6C gKeycode=00 nextKey=01 gNextKey=01 CAUSE: Timeout [evremote2] KEY by code: 160 (OK) [evremnextKey=01 gRESS - 160 1 [evremote2] KEY by code: 160 (OK) [evremote2] KEY_RELEASE - 160 gKeycode=00 nextKey=01 gNextKey=01 CAUSE: Timeout Traceback (most recent call last): File "usr/lib/enigma2/python/Components/ActionMap.py", line 65, in action File "usr/lib/enigma2/python/Components/ActionMap.py", line 46, in action File "usr/lib/enigma2/python/Screens/Wizard.py", line 376, in ok File "usr/lib/enigma2/python/Screens/Wizard.py", line 350, in finished IOError: [Errno 14] Bad address Killed e2 ended <- RTV: 137 * starting e2-> INIT: Sending processes the TERM signal Sending all processes the TERM signal...done. Sending all processes the KILL signal...done. Deactivating swap...umount: tmpfs busy - remounted read-only done. Unmounting local filesystems...umount: tmpfs busy - remounted read-only umount: can't unmount /mnt: Invalid argument done. '0▒▒(Re)start USB... Front USB: scanning bus for devices... 3 USB Device(s) found scanning bus for storage devices... 1 Storage Device(s) found system volume information/ $recycle.bin/ 262144000 root.img 3012748 uimage 2 file(s), 2 dir(s) reading uImage ...................................................................................................................................................................................................................................................................................................... ret=> 3012748 Wait [1] Wait [2] Wait [3] Wait [4] Wait [5] Wait [6] ext2fs_check_if_mount: Can't check if filesystem is mounted due to missing mtab file while determining whether /mnt/root.img is mounted. /mnt/root.img: clean, 6235/64000 files, 123031/256000 blocks mount root INIT: version 2.88 booting init frontpanel [mountvirtfs] Mount /dev in tmpfs [mountvirtfs] Copying device nodes to /dev Starting portmap daemon...Illegal instruction failed! Loading autofs Starting autofs [mountall] Mounting local filesystems... mount: mounting LABEL=RECORD on /hdd failed: No such file or directory Cleaning /tmp. Hostname: 1008G+SE+. init stmfb LOADING MODULES load firmware copLoadFile (file /boot/audio.elf) ustslave: Kernel Version: 24 base_address 0x40400000 copLoadFile (file /boot/video.elf) ustslave: Kernel Version: 24 base_address 0x40000000 init embx init AVS skip mpeg2 [mountall] Mounting local filesystems... [evremote2] Model: 'hs7429' [evremote2] vBoxType: 8 (hs7429) [evremote2] Input device name: "TDT RC event driver" [evremote2] Remote selected: Fortis RemoteControl [evremote2] RemoteControl Map: Keyname Keyword KeyCode -------------------------------------- MENU - 04 - 139 RED - 4B - 398 GREEN - 4A - 399 YELLOW - 49 - 400 BLUE - 48 - 401 EXIT - 1C - 174 TEXT - 0D - 388 EPG - 08 - 365 REWIND - 58 - 168 FASTFORWARD - 5C - 208 PLAY - 55 - 207 PAUSE - 07 - 119 RECORD - 56 - 167 STOP - 54 - 128 STANDBY - 0A - 116 MUTE - 0C - 113 CHANNELUP - 5E - 104 CHANNELDOWN - 5F - 109 VOLUMEUP - 4E - 115 VOLUMEDOWN - 4F - 114 INFO - 06 - 358 OK - 1F - 352 UP - 00 - 103 RIGHT - 02 - 106 DOWN - 01 - 108 LEFT - 03 - 105 BACK - 09 - 158 ZOOM - 0B - 372 VMODE - 0E - 47 RESOLUTION - 0F - 393 TVRADIO - 1A - 378 SLEEP - 1E - 142 OPEN - 40 - 361 FAV - 41 - 364 TIMER - 42 - 362 UPUP - 43 - 414 DOWNDOWN - 44 - 415 NEXT - 4C - 407 LAST - 50 - 412 PIP - 51 - 375 MEDIA - 52 - 226 LIST - 53 - 395 0BUTTON - 10 - 11 1BUTTON - 11 - 2 2BUTTON - 12 - 3 3BUTTON - 13 - 4 4BUTTON - 14 - 5 5BUTTON - 15 - 6 6BUTTON - 16 - 7 7BUTTON - 17 - 8 8BUTTON - 18 - 9 9BUTTON - 19 - 10 -------------------------------------- [evremote2] Frontpanel Map: Keyname Keyword KeyCode -------------------------------------- STANDBY - 00 - 116 OK - 06 - 352 MENU - 05 - 139 VOLUMEUP - 03 - 115 VOLUMEDOWN - 04 - 114 CHANNELUP - 01 - 104 CHANNELDOWN - 02 - 109 -------------------------------------- [evremote2] Supports Long KeyPress: yes [evremote2 fortis] Period = 10, delay = 120 [evremote2] Using period = 10 delay = 120 showSinglePic /boot/bootlogo.mvi VIDEO_SELECT_SOURCE MEMORY (Success) VIDEO_PLAY (Success) VIDEO_CONTINUE: (Success) VIDEO_CLEAR_BUFFER: (Invalid argument) Deconfiguring network interfaces... mount: mounting LABEL=RECORD on /hdd failed: No such file or directory /usr/bin/amixer/usr/bin/amixer: /usr/lib/libasound.so.2: no version information available (required by /usr/bin/amixer) /usr/bin/amixer: /usr/lib/libasound.so.2: no version information available (required by /usr/bin/amixer) [set_was_timer_wakeup] error reading /etc/enigma2/timers.xml [set_was_timer_wakeup] no timer aktiv : /usr/lib/libasound.so.2: no version information available (required by /usr/bin/amixer) Invalid card number. Usage: amixer <options> command Available options: -h,--help this help -c,--card N select the card -D,--device N select the device, default 'default' -d,--debug debug mode -n,--nocheck do not perform range checking -v,--version print version of this program -q,--quiet be quiet -i,--inactive show also inactive controls -a,--abstract L select abstraction level (none or basic) Invalid card number. Usage: amixer <options> command Available options: -h,--help this help -c,--card N select the card -D,--device N select the device, default 'default' -d,--debug debug mode -n,--nocheck do not perform range checking Invalid card number. Usage: amixer <options> command Available options: -h,--help this help -c,--card N select the card -D,--device N select the device, default 'default' -d,--debug debug mode -n,--nocheck do not perform range checking -v,--version print version of this program -q,--quiet be quiet -i,--inactive show also inactive controls -a,--abstract L select abstraction level (none or basic) Available commands: scontrols show all mixer simple controls scontents show contents of all mixer simple controls (default command) sset sID P set contents for one mixer simple control sget sID get contents for one mixer simple control controls show all controls for given card contents show contents of all controls for given card cset cID P set control contents for one control cget cID get control contents for one control Available commands: scontrols show all mixer simple controls scontents show contents of all mixer simple controls (default command) sset sID P set contents for one mixer simple control sget sID get contents for one mixer simple control controls show all controls for given card contents show contents of all controls for given card cset cID P set control contents for one control cget cID get control contents for one control -v,--version print version of this program -q,--quiet be quiet -i,--inactive show also inactive controls -a,--abstract L select abstraction level (none or basic) Available commands: scontrols show all mixer simple controls scontents show contents of all mixer simple controls (default command) sset sID P set contents for one mixer simple control sget sID get contents for one mixer simple control controls show all controls for given card contents show contents of all controls for given card cset cID P set control contents for one control cget cID get control contents for one control ifdown: interface eth1 not configured ifdown: interface wlan0 not configured done. starting e2-> Setting up IP spoofing protection: rp_filter. Configuring network interfaces... udhcpc: started, v1.28.0 udhcpc: sending discover udhcpc: sending select for 192.168.178.143 udhcpc: lease of 192.168.178.143 obtained, lease time 864000 route: SIOCDELRT: No such process adding dns 192.168.178.1 ip: SIOCGIFFLAGS: No such device ip: SIOCGIFFLAGS: No such device done. mount: mounting LABEL=RECORD on /hdd failed: No such file or directory PYTHONPATH: /usr/lib/enigma2/python DVB_API_VERSION 5 DVB_API_VERSION_MINOR 3 ENIGMA_DEBUG_LVL=3 [MAIN] executing main close failed in file object destructor: IOError: [Errno 14] Bad address close failed in file object destructor: IOError: [Errno 14] Bad address close failed in file object destructor: IOError: [Errno 14] Bad address close failed in file object destructor: IOError: [Errno 14] Bad address close failed in file object destructor: IOError: [Errno 14] Bad address close failed in file object destructor: IOError: [Errno 14] Bad address close failed in file object destructor: IOError: [Errno 14] Bad address close failed in file object destructor: IOError: [Errno 14] Bad address close failed in file object destructor: IOError: [Errno 14] Bad address close failed in file object destructor: IOError: [Errno 14] Bad address libpng warning: iCCP: known incorrect sRGB profile libpng warning: iCCP: cHRM chunk does not match sRGB libpng warning: iCCP: known incorrect sRGB profile libpng warning: iCCP: cHRM chunk does not match sRGB close failed in file object destructor: IOError: [Errno 14] Bad address close failed in file object destructor: IOError: [Errno 14] Bad address close failed in file object destructor: IOError: [Errno 14] Bad address [evremote2] KEY by code: 67 (UP) [evremote2] KEY_PRESS - 67 1 [evremote2] KEY by code: 67 (UP) [evremote2] KEY_RELEASE - 67 gKeycode=00 nextKey=01 gNextKey=01 CAUSE: Timeout [evremote2] KEY by code: 67 (UP) [evremote2] KEY_PRESS - 67 1 [evremote2] KEY by code: 67 (UP) [evremote2] KEY_RELEASE - 67 gKeycode=00 nextKey=01 gNextKey=01 CAUSE: Timeout [evremote2] KEY by code: 160 (OK) [evremote2] KEY_PRESS - 160 1 [evremote2] KEY by code: 160 (OK) [evremote2] KEY_RELEASE - 160 gKeycode=00 nextKey=01 gNextKey=01 CAUSE: Timeout [evremote2] KEY by code: 67 (UP) [evremote2] KEY_PRESS - 67 1 [evremote2] KEY by code: 67 (UP) [evremote2] KEY_RELEASE - 67 gKeycode=00 nextKey=01 gNextKey=01 CAUSE: Timeout [evremote2] KEY by code: 6C (DOWN) [evremote2] KEY_PRESS - 6C 1 [evremote2] KEY by code: 6C (DOWN) [evremote2] KEY_RELEASE - 6C gKeycode=00 nextKey=01 gNextKey=01 CAUSE: Timeout [evremote2] KEY by code: 6C (DOWN) [evremote2] KEY_PRESS - 6C 1 [evremote2] KEY by code: 6C (DOWN) [evremote2] KEY_RELEASE - 6C gKeycode=00 nextKey=01 gNextKey=01 CAUSE: Timeout [evremote2] KEY by code: 160 (OK) [evremote2] KEY_PRESS - 160 1 [evremote2] KEY by code: 160 (OK) [evremote2] KEY_RELEASE - 160 gKeycode=00 nextKey=01 gNextKey=01 CAUSE: Timeout Traceback (most recent call last): File "usr/lib/enigma2/python/Components/ActionMap.py", line 65, in action File "usr/lib/enigma2/python/Components/ActionMap.py", line 46, in action File "usr/lib/enigma2/python/Screens/Wizard.py", line 376, in ok File "usr/lib/enigma2/python/Screens/Wizard.py", line 350, in finished IOError: [Errno 14] Bad address Killed e2 ended <- RTV: 137 * INIT: Switching to runlevel: 6 starting e2-> INIT: Sending processes the TERM signal Sending all processes the TERM signal...done. Sending all processes the KILL signal...done. Deactivating swap...umount: tmpfs busy - remounted read-only done. Unmounting local filesystems...umount: tmpfs busy - remounted read-only umount: can't unmount /mnt: Invalid argument done. '0▒▒oting... FrTs
Ergebnis 1 bis 10 von 15
Hybrid-Darstellung
-
21.01.2018 #1arrap1968Gast
Zitieren