Seite 1 von 2 12 LetzteLetzte
Ergebnis 1 bis 10 von 15
  1. #1
    arrap1968
    Gast

    HDMU_17212_E2_1008g+se+_217_git_614

    Hi
    Leider !!! geht immer noch nicht.
    Bleibt wie bei "Boot" stehen !!

    Code:
    '0¦¦(Re)start USB...
    Front USB:   scanning bus for devices... 3 USB Device(s) found
           scanning bus for storage devices... 1 Storage Device(s) found
                system volume information/
                $recycle.bin/
     262144000   root.img
      1975986   uimage
    
    2 file(s), 2 dir(s)
    
    reading uImage
    ................................................................................................................................................................................................
    ret=> 1975986


  2. #2
    Moderator Avatar von morly
    Registriert seit
    15.07.2012
    Ort
    Österreich
    Beiträge
    6.684
    Thanks
    789
    Thanked 2.764 Times in 1.357 Posts
    Image erfolgreich geflasht?
    Steck mal alle USB Devices ab...
    "Every Setback is a Set Up for a Comeback"


  3. #3
    arrap1968
    Gast
    Was meinst du ?
    Soll ich front usb benutzen ?

    PS: Habe auch den front USB ausprobiert , Bleibt bei Boot stehen !!
    Geändert von arrap1968 (19.01.2018 um 23:14 Uhr)


  4. #4
    Moderator Avatar von morly
    Registriert seit
    15.07.2012
    Ort
    Österreich
    Beiträge
    6.684
    Thanks
    789
    Thanked 2.764 Times in 1.357 Posts
    Passiert das, wenn du das Image flashen willst?
    "Every Setback is a Set Up for a Comeback"


  5. #5
    arrap1968
    Gast
    Ich flashe nicht !!!
    nur die beiden dateien auf Usb stick und wenn er hochgefahren ist mache ich backup wiederherstellen . So habe ich das immer gemacht mei den letzten funktionierenden Images.
    Aber soweit komme ich nicht , Image fährt nicht hoch .Wie gesagt bleibt bei "Boot " stehen als wenn er die ulimage nicht weiter lesen kann.
    Bei den funktionierenden Images ist die ulimage auch grösser !!! nehmlich 2943 kb !!!!

    Und so sieht es aus bei der HDMU 16609
    Code:
    '0¦¦(Re)start USB...
    Front USB:   scanning bus for devices... 3 USB Device(s) found
           scanning bus for storage devices... 1 Storage Device(s) found
                system volume information/
                $recycle.bin/
     262144000   root.img
      3012751   uimage
    
    2 file(s), 2 dir(s)
    
    reading uImage
    ......................................................................................................................................................................................................................................................................................................
    ret=> 3012751
    Wait [1]
    Wait [2]
    Wait [3]
    Wait [4]
    Wait [5]
    Wait [6]
    ext2fs_check_if_mount: Can't check if filesystem is mounted due to missing mtab file while determining whether /mnt/root.img is mounted.
    /mnt/root.img: recovering journal
    /mnt/root.img: clean, 9239/64000 files, 149724/256000 blocks
    mount root
    INIT: version 2.88 booting
    init frontpanel
    [mountvirtfs] Mount /dev in tmpfs
    [mountvirtfs] Copying device nodes to /dev
    Starting portmap daemon....
    Loading autofs
    Starting autofs
    [mountall] Mounting local filesystems...
    Cleaning /tmp.
    Hostname: 1008G+SE+.
    init stmfb
    LOADING MODULES
    load firmware
    copLoadFile (file /boot/audio.elf)
    ustslave: Kernel Version: 24
    base_address 0x40400000
    seeking to 0
    seeking to 5e00
    seeking to 12460
    seeking to 1ab60
    seeking to 154300
    seeking to 154338
    seeking to 154370
    seeking to 191a58
    seeking to 191a60
    seeking to 191a68
    seeking to 191a70
    seeking to 1aae40
    seeking to 1aaf00
    copLoadFile (file /boot/video.elf)
    ustslave: Kernel Version: 24
    base_address 0x40000000
    seeking to 0
    seeking to 60980
    seeking to 148478
    seeking to 1484b0
    seeking to 1484e8
    seeking to 158858
    seeking to 158864
    seeking to 158880
    seeking to 184d94
    seeking to 186e00
    init embx
    init AVS
    skip mpeg2
    Model: 'hs7429'
    vBoxType: 8
    Input device name: "TDT RC event driver"
    Selected Remote: Fortis RemoteControl
    RemoteControl Map:
                    MENU - 04 - 139
                     RED - 4B - 398
                   GREEN - 4A - 399
                  YELLOW - 49 - 400
                    BLUE - 48 - 401
                    EXIT - 1C - 174
                    TEXT - 0D - 388
                     EPG - 08 - 365
                  REWIND - 58 - 168
             FASTFORWARD - 5C - 208
                    PLAY - 55 - 207
                   PAUSE - 07 - 119
                  RECORD - 56 - 167
                    STOP - 54 - 128
                 STANDBY - 0A - 116
                    MUTE - 0C - 113
               CHANNELUP - 5E - 104
             CHANNELDOWN - 5F - 109
                VOLUMEUP - 4E - 115
              VOLUMEDOWN - 4F - 114
                    INFO - 06 - 358
                      OK - 1F - 352
                      UP - 00 - 103
                   RIGHT - 02 - 106
                    DOWN - 01 - 108
                    LEFT - 03 - 105
                    BACK - 09 - 158
                    ZOOM - 0B - 372
                   VMODE - 0E -  47
              RESOLUTION - 0F - 393
                 TVRADIO - 1A - 378
                   SLEEP - 1E - 142
                    OPEN - 40 - 361
                     FAV - 41 - 364
                   TIMER - 42 - 362
                    UPUP - 43 - 414
                DOWNDOWN - 44 - 415
                    NEXT - 4C - 407
                    LAST - 50 - 412
                     PIP - 51 - 375
                   MEDIA - 52 - 226
                    LIST - 53 - 395
                 0BUTTON - 10 -  11
                 1BUTTON - 11 -   2
                 2BUTTON - 12 -   3
                 3BUTTON - 13 -   4
                 4BUTTON - 14 -   5
                 5BUTTON - 15 -   6
                 6BUTTON - 16 -   7
                 7BUTTON - 17 -   8
                 8BUTTON - 18 -   9
                 9BUTTON - 19 -  10
    Frontpanel Map:
                 STANDBY - 00 - 116
                      OK - 06 - 352
                    MENU - 05 - 139
                VOLUMEUP - 03 - 115
              VOLUMEDOWN - 04 - 114
               CHANNELUP - 01 - 104
             CHANNELDOWN - 02 - 109
    Supports Long KeyPress: 1
    processComplex >
    period 10, delay 120
    Using period=10 delay=120
    [SEM] DOWN
    [mountall] Mounting local filesystems...
    showSinglePic /boot/bootlogo.mvi
    VIDEO_SELECT_SOURCE MEMORY (Success)
    VIDEO_PLAY (Success)
    VIDEO_CONTINUE: (Success)
    VIDEO_CLEAR_BUFFER: (Invalid argument)
    Deconfiguring network interfaces... done.
    Setting up IP spoofing protection: rp_filter.
    Configuring network interfaces... done.
    [set_was_timer_wakeup] no timer aktiv
    /usr/emu/oscam11198: invalid option -- 'b'
    ERROR: Unknown command line parameter: -b
    Invalid card number.
    Usage: amixer <options> command
    
    Available options:
      -h,--help       this help
      -c,--card N     select the card
      -D,--device N   select the device, default 'default'
      -d,--debug      debug mode
      -n,--nocheck    do not perform range checking
      -v,--version    print version of this program
      -q,--quiet      be quiet
      -i,--inactive   show also inactive controls
      -a,--abstract L select abstraction level (none or basic)
    
    Available commands:
      scontrols       show all mixer simple controls
      scontents       show contents of all mixer simple controls (default command)
      sset sID P      set contents for one mixer simple control
    Invalid card number.
    Usage: amixer <options> command
    
    Available options:
      -h,--help       this help
      -c,--card N     select the card
      -D,--device N   select the device, default 'default'
      -d,--debug      debug mode
      -n,--nocheck    do not perform range checking
      -v,--version    print version of this program
      -q,--quiet      be quiet
      -i,--inactive   show also inactive controls
      -a,--abstract L select abstraction level (none or basic)
    
    Available commands:
      scontrols       show all mixer simple controls
      scontents       show contents of all mixer simple controls (default command)
      sset sID P      set contents for one mixer simple control
      sget sID        get contents for one mixer simple control
      controls        show all controls for given card
      contents        show contents of all controls for given card
      cset cID P      set control contents for one control
      cget cID        get control contents for one control
      sget sID        get contents for one mixer simple control
      controls        show all controls for given card
      contents        show contents of all controls for given card
      cset cID P      set control contents for one control
      cget cID        get control contents for one control
    Invalid card number.
    Usage: amixer <options> command
    
    Available options:
      -h,--help       this help
      -c,--card N     select the card
      -D,--device N   select the device, default 'default'
      -d,--debug      debug mode
      -n,--nocheck    do not perform range checking
      -v,--version    print version of this program
      -q,--quiet      be quiet
      -i,--inactive   show also inactive controls
      -a,--abstract L select abstraction level (none or basic)
    
    Available commands:
      scontrols       show all mixer simple controls
      scontents       show contents of all mixer simple controls (default command)
      sset sID P      set contents for one mixer simple control
      sget sID        get contents for one mixer simple control
      controls        show all controls for given card
      contents        show contents of all controls for given card
      cset cID P      set control contents for one control
      cget cID        get control contents for one control
    starting e2->
    PYTHONPATH: /usr/lib/enigma2/python
    DVB_API_VERSION 5 DVB_API_VERSION_MINOR 3
    ENIGMA_DEBUG_LVL=3
    [MAIN] executing main
    libpng warning: iCCP: known incorrect sRGB profile
    TuxTxt cache cleared
    TuxTxt cache cleared
    TuxTxt: initialized
    TuxTxt service started 17f2
    [eDVBPESReader] Created. Opening demux
    [eDVBPESReader] Created. Opening demux
    TuxTxt running thread...(17f2)
    Geändert von arrap1968 (20.01.2018 um 15:44 Uhr)


  6. #6
    VIP
    Registriert seit
    13.05.2012
    Beiträge
    759
    Thanks
    35
    Thanked 345 Times in 243 Posts
    Mhh...fällt was auf ?
    Code:
     262144000   root.img
      1975986   uimage
    
    2 file(s), 2 dir(s)
    
    reading uImage
    ................................................................................................................................................................................................
    ret=> 1975986
    
    
     262144000   root.img
      3012751   uimage
    
    2 file(s), 2 dir(s)
    
    reading uImage
    ......................................................................................................................................................................................................................................................................................................
    ret=> 3012751
    sollte mich wundern, wenn der Kernel bei dieser Box plötzlich ~1 MB kleiner ist.


  7. #7
    arrap1968
    Gast
    das hat ainauna schon vor 3 wochen hingewiesen !!!!

    http://www.hdmedia-universe.com/boar...e-_217_git_608


  8. #8
    Moderator Avatar von morly
    Registriert seit
    15.07.2012
    Ort
    Österreich
    Beiträge
    6.684
    Thanks
    789
    Thanked 2.764 Times in 1.357 Posts
    Problem erkannt - wird schlichtweg der falsche Kernel (falsche Box) gebaut!
    "Every Setback is a Set Up for a Comeback"


  9. #9
    Moderator Avatar von morly
    Registriert seit
    15.07.2012
    Ort
    Österreich
    Beiträge
    6.684
    Thanks
    789
    Thanked 2.764 Times in 1.357 Posts
    kannst bitte diesen testen:

    edit: Link entfernt, neuer in Kürze...
    "Every Setback is a Set Up for a Comeback"


  10. #10
    arrap1968
    Gast
    Jetzt macht er Reboot schleife

    Code:
    '0▒▒(Re)start USB...
    Front USB:   scanning bus for devices... 3 USB Device(s) found
           scanning bus for storage devices... 1 Storage Device(s) found
                system volume information/
                $recycle.bin/
     262144000   root.img
      3012738   uimage
    
    2 file(s), 2 dir(s)
    
    reading uImage
    ......................................................................................................................................................................................................................................................................................................
    ret=> 3012738
    Wait [1]
    Wait [2]
    Wait [3]
    Wait [4]
    Wait [5]
    Wait [6]
    ext2fs_check_if_mount: Can't check if filesystem is mounted due to missing mtab file while determining whether /mnt/root.img is mounted.
    /mnt/root.img: clean, 6217/64000 files, 121587/256000 blocks
    mount root
    INIT: version 2.88 booting
    insmod: can't insert '/lib/modules/e2_proc.ko': invalid module format
    init frontpanel
    insmod: /lib/modules/nuvoton.ko: module not found
    insmod: can't insert '/lib/modules/simu_button.ko': invalid module format
    WAIT 1 min
    /etc/init.d/rcS: line 215: can't create /dev/vfd: No such device or address
    mknod: /dev/avs: File exists
    mknod: /dev/fuse: File exists
    [mountvirtfs] Mount /dev in tmpfs
    [mountvirtfs] Copying device nodes to /dev
    Starting portmap daemon....
    Loading autofs
    insmod: can't insert '/lib/modules/autofs4.ko': invalid module format
    Starting autofs
    [mountall] Mounting local filesystems...
    mount: mounting LABEL=RECORD on /hdd failed: No such file or directory
    Cleaning /tmp /var/run /var/lock.
    insmod: can't insert '/lib/modules/cpu_frequ.ko': invalid module format
    /etc/init.d/rcS: line 667: can't create /proc/cpu_frequ/pll0_ndiv_mdiv: nonexistent directory
    Hostname: 1008G+SE+.
    init stmfb
    insmod: can't insert '/lib/modules/stmcore-display-sti7111.ko': invalid module format
    insmod: can't insert '/lib/modules/stmfb.ko': invalid module format
    /etc/init.d/rcS: line 667: can't create /dev/vfd: No such device or address
    LOADING MODULES
    load firmware
    copLoadFile file /boot/audio.elf)
    ustslave: Kernel Version: 24
    base_address 0x40400000
    copLoadFile (file /boot/video.elf)
    ustslave: Kernel Version: 24
    base_address 0x40000000
    init embx
    insmod: can't insert '/lib/modules/embxshell.ko': invalid module format
    insmod: can't insert '/lib/modules/embxmailbox.ko': invalid module format
    insmod: can't insert '/lib/modules/embxshm.ko': invalid module format
    insmod: can't insert '/lib/modules/mme_host.ko': invalid module format
    init AVS
    insmod: can't insert '/lib/modules/avs.ko': invalid module format
    insmod: can't insert '/lib/modules/mmelog.ko': invalid module format
    skip mpeg2
    insmod: can't insert '/lib/modules/ksound.ko': invalid module format
    insmod: can't insert '/lib/modules/p2div64.ko': invalid module format
    insmod: can't insert '/lib/modules/stm_v4l2.ko': invalid module format
    insmod: can't insert '/lib/modules/pseudocard.ko': invalid module format
    insmod: can't insert '/lib/modules/lnb.ko': invalid module format
    insmod: can't insert '/lib/modules/stv090x.ko': invalid module format
    insmod: /lib/modules/starci.ko: module not found
    insmod: can't insert '/lib/modules/pti.ko': invalid module format
    insmod: can't insert '/lib/modules/stm_monitor.ko': invalid module format
    insmod: can't insert '/lib/modules/stmsysfs.ko': invalid module format
    insmod: can't insert '/lib/modules/stmdvb.ko': invalid module format
    insmod: can't insert '/lib/modules/player2.ko': invalid module format
    insmod: can't insert '/lib/modules/sth264pp.ko': invalid module format
    insmod: can't insert '/lib/modules/stmalloc.ko': invalid module format
    insmod: can't insert '/lib/modules/platform.ko': invalid module format
    insmod: can't insert '/lib/modules/silencegen.ko': invalid module format
    insmod: can't insert '/lib/modules/smartcard.ko': invalid module format
    insmod: can't insert '/lib/modules/ntfs.ko': invalid module format
    insmod: can't insert '/lib/modules/bpamem.ko': invalid module format
    /etc/init.d/rcS: line 667: can't create /proc/stb/video/videomode: nonexistent directory
    [evremote2] vBoxType: 0 (LircdName)
    [evremote2] Remote selected: (null)
    [evremote2] RemoteControl Map:
                 Keyname  Keyword  KeyCode
    --------------------------------------
                         -   ▒  -   15
                        -  ▒▒▒o(@  -  4194600
                         -  0  -   11
                         -     -  588
                         -  h       @  -    8
                       $  -  ▒▒▒o  -    3
    --------------------------------------
    [evremote2] Frontpanel Map:
                 Keyname  Keyword  KeyCode
    --------------------------------------
    --------------------------------------
    [evremote2] Supports Long KeyPress: yes
    [mountall] Mounting local filesystems...
    showSinglePic /boot/bootlogo.mvi
    VIDEO_SET_FORMAT failed (Bad file descriptor)
    Deconfiguring network interfaces... ifdown: interface lo not configured
    ifdown: interface eth0 not configured
    ifdown: interface eth1 not configured
    ifdown: interface wlan0 not configured
    done.
    Setting up IP spoofing protection: rp_filter.
    Configuring network interfaces... mount: mounting LABEL=RECORD on /hdd failed: No such file or directory
    udhcpc: started, v1.28.0
    udhcpc: sending discover
    [set_was_timer_wakeup] error reading /etc/enigma2/timers.xml
    [set_was_timer_wakeup] no timer aktiv
    /usr/bin/amixer: /usr/lib/libasound.so.2: no version information available (required by /usr/bin/amixer)
    /usr/bin/amixer: /usr/lib/libasound.so.2: no version information available (required by /usr/bin/amixer)
    /usr/bin/amixer: /usr/lib/libasound.so.2: no version information available (required by /usr/bin/amixer)
    cat: can't open '/proc/stb/video/plane/psi_tint': No such file or directory
    Invalid card number.
    Usage: amixer <options> command
    
    Available options:
      -h,--help       this help
      -c,--card N     select the card
      -D,--device N   select the device, default 'default'
      -d,--debug      debug mode
      -n,--nocheck    do not perform range checking
      -v,--version    print version of this program
      -q,--quiet      be quiet
      -i,--inactive   show also inactive controls
      -a,--abstract L select abstraction level (none or basic)
    
    Available commands:
      scontrols       show all mixer simple controls
      scontents       show contents of all mixer simple controls (default command)
    Invalid card number.
    Usage: amixer <options> command
    
    Available options:
      -h,--help       this help
      -c,--card N     select the card
      -D,--device N   select the device, default 'default'
      -d,--debug      debug mode
      -n,--nocheck    do not perform range checking
      -v,--version    print version of this program
      -q,--quiet      be quiet
      -i,--inactive   show also inactive controls
      -a,--abstract L select abstraction level (none or basic)
    
    Available commands:
      scontrols       show all mixer simple controls
      scontents       show contents of all mixer simple controls (default command)
      sset sID P      set contents for one mixer simple control
      sget sID        get contents for one mixer simple control
      controls        show all controls for given card
      contents        show contents of all controls for given card
      cset cID P      set control contents for one control
      cget cID        get control contents for one control
    Invalid card number.
    Usage: amixer <options> command
    
    Available options:
      -h,--help       this help
      -c,--card N     select the card
      -D,--device N   select the device, default 'default'
      -d,--debug      debug mode
      -n,--nocheck    do not perform range checking
      -v,--version    print version of this program
      -q,--quiet      be quiet
      -i,--inactive   show also inactive controls
      -a,--abstract L select abstraction level (none or basic)
    
    Available commands:
      scontrols       show all mixer simple controls
      scontents       show contents of all mixer simple controls (default command)
      sset sID P      set contents for one mixer simple control
      sget sID        get contents for one mixer simple control
      controls        show all controls for given card
      contents        show contents of all controls for given card
      cset cID P      set control contents for one control
      cget cID        get control contents for one control
      sset sID P      set contents for one mixer simple control
      sget sID        get contents for one mixer simple control
      controls        show all controls for given card
      contents        show contents of all controls for given card
      cset cID P      set control contents for one control
      cget cID        get control contents for one control
    /etc/init.d/rcS: line 667: can't create /dev/vfd: No such device or address
    starting e2->
    cat: can't open '/proc/stb/video/plane/psi_tint': No such file or directory
    udhcpc: sending select for 192.168.178.140
    udhcpc: lease of 192.168.178.140 obtained, lease time 864000
    route: SIOCDELRT: No such process
    adding dns 192.168.178.1
    ip: SIOCGIFFLAGS: No such device
    ip: SIOCGIFFLAGS: No such device
    done.
    cat: can't open '/proc/stb/video/plane/psi_tint': No such file or directory
    rm: can't remove '/media/USB/SWAPPART': No such file or directory
    rm: can't remove '/media/USB/Record': No such file or directory
    mount: mounting LABEL=RECORD on /hdd failed: No such file or directory
    cat: can't open '/proc/stb/video/plane/psi_tint': No such file or directory
    cat: can't open '/proc/stb/video/plane/psi_tint': No such file or directory
    cat: can't open '/proc/stb/video/plane/psi_tint': No such file or directory
    cat: can't open '/proc/stb/video/plane/psi_tint': No such file or directory
    cat: can't open '/proc/stb/video/plane/psi_tint': No such file or directory
    PYTHONPATH: /usr/lib/enigma2/python
    DVB_API_VERSION 5 DVB_API_VERSION_MINOR 3
    ENIGMA_DEBUG_LVL=3
    cat: can't open '/proc/stb/video/plane/psi_tint': No such file or directory
    /dev/fb0: No such device
    [gFBDC] no framebuffer available
    Segmentation fault
    e2 ended <- RTV:  139
    *
    INIT: Switching to runstarting e2->
    INIT: Sending processes the TERM signal
    Sending all processes the TERM signal...done.
    Sending all processes the KILL signal...done.
    Deactivating swap...umount: tmpfs busy - remounted read-only
    done.
    Unmounting local filesystems...umount: tmpfs busy - remounted read-only
    umount: can't unmount /mnt: Invalid argument
    done.
    '0▒▒(Re)start USB...
    Front USB:   scanning bus for devices... 3 USB Device(s) found
           scanning bus for storage devices... 1 Storage Device(s) found
                system volume information/
                $recycle.bin/
     262144000   root.img
      3012738   uimage
    
    2 file(s), 2 dir(s)
    
    reading uImage
    ......................................................................................................................................................................................................................................................................................................
    ret=> 3012738
    Wait [1]
    Wait [2]
    Wait [3]
    Wait [4]
    Wait [5]
    Wait [6]
    ext2fs_check_if_mount: Can't check if filesystem is mounted due to missing mtab file while determining whether /mnt/root.img is mounted.
    /mnt/root.img: clean, 6238/64000 files, 121990/256000 blocks
    mount root
    INIT: version 2.88 booting
    insmod: can't insert '/lib/modules/e2_proc.ko': invalid module format
    init frontpanel
    insmod: /lib/modules/nuvoton.ko: module not found
    insmod: can't insert '/lib/modules/simu_button.ko': invalid module format
    [mountvirtfs] Mount /dev in tmpfs
    [mountvirtfs] Copying device nodes to /dev
    Starting portmap daemon....
    Loading autofs
    insmod: can't insert '/lib/modules/autofs4.ko': invalid module format
    Starting autofs
    [mountall] Mounting local filesystems...
    mount: mounting LABEL=RECORD on /hdd failed: No such file or directory
    Cleaning /tmp.
    insmod: can't insert '/lib/modules/cpu_frequ.ko': invalid module format
    /etc/init.d/rcS: line 667: can't create /proc/cpu_frequ/pll0_ndiv_mdiv: nonexistent directory
    Hostname: 1008G+SE+.
    init stmfb
    insmod: can't insert '/lib/modules/stmcore-display-sti7111.ko': invalid module format
    insmod: can't insert '/lib/modules/stmfb.ko': invalid module format
    /etc/init.d/rcS: line 667: can't create /dev/vfd: No such device or address
    LOADING MODULES
    load firmware
    copLoadFile (file /boot/audio.elf)
    ustslave: Kernel Version: 24
    base_address 0x40400000
    copLoadFile (file /boot/video.elf)
    ustslave: Kernel Version: 24
    base_address 0x40000000
    init embx
    insmod: can't insert '/lib/modules/embxshell.ko': invalid module format
    insmod: can't insert '/lib/modules/embxmailbox.ko': invalid module format
    insmod: can't insert '/lib/modules/embxshm.ko': invalid module format
    insmod: can't insert '/lib/modules/mme_host.ko': invalid module format
    init AVS
    insmod: can't insert '/lib/modules/avs.ko': invalid module format
    insmod: can't insert '/lib/modules/mmelog.ko': invalid module format
    skip mpeg2
    insmod: can't insert '/lib/modules/ksound.ko': invalid module format
    insmod: can't insert '/lib/modules/p2div64.ko': invalid module format
    insmod: can't insert '/lib/modules/stm_v4l2.ko': invalid module format
    insmod: can't insert '/lib/modules/pseudocard.ko': invalid module format
    insmod: can't insert '/lib/modules/lnb.ko': invalid module format
    insmod: can't insert '/lib/modules/stv090x.ko': invalid module format
    insmod: /lib/modules/starci.ko: module not found
    insmod: can't insert '/lib/modules/pti.ko': invalid module format
    insmod: can't insert '/lib/modules/stm_monitor.ko': invalid module format
    insmod: can't insert '/lib/modules/stmsysfs.ko': invalid module format
    insmod: can't insert '/lib/modules/stmdvb.ko': invalid module format
    insmod: can't insert '/lib/modules/player2.ko': invalid module format
    insmod: can't insert '/lib/modules/sth264pp.ko': invalid module format
    insmod: can't insert '/lib/modules/stmalloc.ko': invalid module format
    insmod: can't insert '/lib/modules/platform.ko': invalid module format
    insmod: can't insert '/lib/modules/silencegen.ko': invalid module format
    insmod: can't insert '/lib/modules/smartcard.ko': invalid module format
    insmod: can't insert '/lib/modules/ntfs.ko': invalid module format
    insmod: can't insert '/lib/modules/bpamem.ko': invalid module format
    /etc/init.d/rcS: line 667: can't create /proc/stb/video/videomode: nonexistent directory
    [evremote2] vBoxType: 0 (LircdName)
    [evremote2] Remote selected: (null)
    [evremote2] RemoteControl Map:
                 Keyname  Keyword  KeyCode
    --------------------------------------
                         -   ▒  -   15
                        -  ▒▒▒o(@  -  4194600
                         -  0  -   11
                         -     -  588
                         -  h       @  -    8
                       $  -  ▒▒▒o  -    3
    --------------------------------------
    [evremote2] Frontpanel Map:
                 Keyname  Keyword  KeyCode
    --------------------------------------
    --------------------------------------
    [evremote2] Supports Long KeyPress: yes
    [mountall] Mounting local filesystems...
    showSinglePic /boot/bootlogo.mvi
    VIDEO_SET_FORMAT failed (Bad file descriptor)
    Deconfiguring network interfaces... mount: mounting LABEL=RECORD on /hdd failed: No such file or directory
    [set_was_timer_wakeup] error reading /etc/enigma2/timers.xml
    [set_was_timer_wakeup] no timer aktiv
    /usr/bin/amixer: /usr/lib/libasound.so.2: no version information available (required by /usr/bin/amixer)
    /usr/bin/amixer: /usr/lib/libasound.so.2: no version information available (required by /usr/bin/amixer)
    /usr/bin/amixer: /usr/lib/libasound.so.2: no version information available (required by /usr/bin/amixer)
    cat: can't open '/proc/stb/video/plane/psi_tint': No such file or directory
    Invalid card number.
    Invalid card number.
    Invalid card number.
    Usage: amixer <options> command
    
    Available options:
      -h,--help       this help
      -c,--card N     select the card
      -D,--device N   select the device, default 'default'
      -d,--debug      debug mode
      -n,--nocheck    do not perform range checking
      -v,--version    print version of this program
      -q,--quiet      be quiet
      -i,--inactive   show also inactive controls
      -a,--abstract L select abstraction level (none or basic)
    
    Available commands:
      scontrols       show all mixer simple controls
      scontents       show contents of all mixer simple controls (default command)
      sset sID P      set contents for one mixer simple control
      sget sID        get contents for one mixer simple control
      controls        show all controls for given card
      contents        show contents of all controls for given card
      cset cID P      set control contents for one control
    ifdown: interface eth1 not configured
    ifdown: interface wlan0 not configured
    done.
    Usage: amixer <options> command
    
    Available options:
      -h,--help       this help
      -c,--card N     select the card
      -D,--device N   select the device, default 'default'
      -d,--debug      debug mode
      -n,--nocheck    do not perform range checking
      -v,--version    print version of this program
      -q,--quiet      be quiet
      -i,--inactive   show also inactive controls
      -a,--abstract L select abstraction level (none or basic)
    
    Available commands:
      scontrols       show all mixer simple controls
      scontents       show contents of all mixer simple controls (default command)
      sset sID P      set contents for one mixer simple control
      sget sID        get contents for one mixer simple control
      controls        show all controls for given card
      contents        show contents of all controls for given card
      cset cID P      set control contents for one control
      cget cID        get control contents for one control
    Usage: amixer <options> command
    
    Available options:
      -h,--help       this help
      -c,--card N     select the card
      -D,--device N   select the device, default 'default'
      -d,--debug      debug mode
      -n,--nocheck    do not perform range checking
      -v,--version    print version of this program
      -q,--quiet      be quiet
      -i,--inactive   show also inactive controls
      -a,--abstract L select abstraction level (none or basic)
    
    Available commands:
      scontrols       show all mixer simple controls
      scontents       show contents of all mixer simple controls (default command)
      sset sID P      set contents for one mixer simple control
      sget sID        get contents for one mixer simple control
      controls        show all controls for given card
      contents        show contents of all controls for given card
      cset cID P      set control contents for one control
      cget cID        get control contents for one control
      cget cID        get control contents for one control
    cat: can't open '/proc/stb/video/plane/psi_tint': No such file or directory
    /etc/init.d/rcS: line 667: can't create /dev/vfd: No such device or address
    starting e2->
    Setting up IP spoofing protection: rp_filter.
    Configuring network interfaces... udhcpc: started, v1.28.0
    udhcpc: sending discover
    cat: can't open '/proc/stb/video/plane/psi_tint': No such file or directory
    udhcpc: sending select for 192.168.178.141
    udhcpc: lease of 192.168.178.141 obtained, lease time 864000
    route: SIOCDELRT: No such process
    adding dns 192.168.178.1
    ip: SIOCGIFFLAGS: No such device
    ip: SIOCGIFFLAGS: No such device
    done.
    mount: mounting LABEL=RECORD on /hdd failed: No such file or directory
    cat: can't open '/proc/stb/video/plane/psi_tint': No such file or directory
    PYTHONPATH: /usr/lib/enigma2/python
    DVB_API_VERSION 5 DVB_API_VERSION_MINOR 3
    ENIGMA_DEBUG_LVL=3
    cat: can't open '/proc/stb/video/plane/psi_tint': No such file or directory
    /dev/fb0: No such device
    [gFBDC] no framebuffer available
    Segmentation fault
    e2 ended <- RTV:  139
    *
    INIT: Switching to runstarting e2->
    INIT: Sending processes the TERM signal
    Sending all processes the TERM signal...done.
    Sending all processes the KILL signal...done.
    Deactivating swap...umount: tmpfs busy - remounted read-only
    done.
    Unmounting local filesystems...umount: tmpfs busy - remounted read-only
    umount: can't unmount /mnt: Invalid argument
    done.
    '0▒▒oting... FrTs


Berechtigungen

  • Neue Themen erstellen: Nein
  • Themen beantworten: Nein
  • Anhänge hochladen: Nein
  • Beiträge bearbeiten: Nein
  •