kannst bitte diesen testen:
edit: Link entfernt, neuer in Kürze...
kannst bitte diesen testen:
edit: Link entfernt, neuer in Kürze...
"Every Setback is a Set Up for a Comeback"
Jetzt macht er Reboot schleife
Code:'0▒▒(Re)start USB... Front USB: scanning bus for devices... 3 USB Device(s) found scanning bus for storage devices... 1 Storage Device(s) found system volume information/ $recycle.bin/ 262144000 root.img 3012738 uimage 2 file(s), 2 dir(s) reading uImage ...................................................................................................................................................................................................................................................................................................... ret=> 3012738 Wait [1] Wait [2] Wait [3] Wait [4] Wait [5] Wait [6] ext2fs_check_if_mount: Can't check if filesystem is mounted due to missing mtab file while determining whether /mnt/root.img is mounted. /mnt/root.img: clean, 6217/64000 files, 121587/256000 blocks mount root INIT: version 2.88 booting insmod: can't insert '/lib/modules/e2_proc.ko': invalid module format init frontpanel insmod: /lib/modules/nuvoton.ko: module not found insmod: can't insert '/lib/modules/simu_button.ko': invalid module format WAIT 1 min /etc/init.d/rcS: line 215: can't create /dev/vfd: No such device or address mknod: /dev/avs: File exists mknod: /dev/fuse: File exists [mountvirtfs] Mount /dev in tmpfs [mountvirtfs] Copying device nodes to /dev Starting portmap daemon.... Loading autofs insmod: can't insert '/lib/modules/autofs4.ko': invalid module format Starting autofs [mountall] Mounting local filesystems... mount: mounting LABEL=RECORD on /hdd failed: No such file or directory Cleaning /tmp /var/run /var/lock. insmod: can't insert '/lib/modules/cpu_frequ.ko': invalid module format /etc/init.d/rcS: line 667: can't create /proc/cpu_frequ/pll0_ndiv_mdiv: nonexistent directory Hostname: 1008G+SE+. init stmfb insmod: can't insert '/lib/modules/stmcore-display-sti7111.ko': invalid module format insmod: can't insert '/lib/modules/stmfb.ko': invalid module format /etc/init.d/rcS: line 667: can't create /dev/vfd: No such device or address LOADING MODULES load firmware copLoadFile file /boot/audio.elf) ustslave: Kernel Version: 24 base_address 0x40400000 copLoadFile (file /boot/video.elf) ustslave: Kernel Version: 24 base_address 0x40000000 init embx insmod: can't insert '/lib/modules/embxshell.ko': invalid module format insmod: can't insert '/lib/modules/embxmailbox.ko': invalid module format insmod: can't insert '/lib/modules/embxshm.ko': invalid module format insmod: can't insert '/lib/modules/mme_host.ko': invalid module format init AVS insmod: can't insert '/lib/modules/avs.ko': invalid module format insmod: can't insert '/lib/modules/mmelog.ko': invalid module format skip mpeg2 insmod: can't insert '/lib/modules/ksound.ko': invalid module format insmod: can't insert '/lib/modules/p2div64.ko': invalid module format insmod: can't insert '/lib/modules/stm_v4l2.ko': invalid module format insmod: can't insert '/lib/modules/pseudocard.ko': invalid module format insmod: can't insert '/lib/modules/lnb.ko': invalid module format insmod: can't insert '/lib/modules/stv090x.ko': invalid module format insmod: /lib/modules/starci.ko: module not found insmod: can't insert '/lib/modules/pti.ko': invalid module format insmod: can't insert '/lib/modules/stm_monitor.ko': invalid module format insmod: can't insert '/lib/modules/stmsysfs.ko': invalid module format insmod: can't insert '/lib/modules/stmdvb.ko': invalid module format insmod: can't insert '/lib/modules/player2.ko': invalid module format insmod: can't insert '/lib/modules/sth264pp.ko': invalid module format insmod: can't insert '/lib/modules/stmalloc.ko': invalid module format insmod: can't insert '/lib/modules/platform.ko': invalid module format insmod: can't insert '/lib/modules/silencegen.ko': invalid module format insmod: can't insert '/lib/modules/smartcard.ko': invalid module format insmod: can't insert '/lib/modules/ntfs.ko': invalid module format insmod: can't insert '/lib/modules/bpamem.ko': invalid module format /etc/init.d/rcS: line 667: can't create /proc/stb/video/videomode: nonexistent directory [evremote2] vBoxType: 0 (LircdName) [evremote2] Remote selected: (null) [evremote2] RemoteControl Map: Keyname Keyword KeyCode -------------------------------------- - ▒ - 15 - ▒▒▒o(@ - 4194600 - 0 - 11 - - 588 - h @ - 8 $ - ▒▒▒o - 3 -------------------------------------- [evremote2] Frontpanel Map: Keyname Keyword KeyCode -------------------------------------- -------------------------------------- [evremote2] Supports Long KeyPress: yes [mountall] Mounting local filesystems... showSinglePic /boot/bootlogo.mvi VIDEO_SET_FORMAT failed (Bad file descriptor) Deconfiguring network interfaces... ifdown: interface lo not configured ifdown: interface eth0 not configured ifdown: interface eth1 not configured ifdown: interface wlan0 not configured done. Setting up IP spoofing protection: rp_filter. Configuring network interfaces... mount: mounting LABEL=RECORD on /hdd failed: No such file or directory udhcpc: started, v1.28.0 udhcpc: sending discover [set_was_timer_wakeup] error reading /etc/enigma2/timers.xml [set_was_timer_wakeup] no timer aktiv /usr/bin/amixer: /usr/lib/libasound.so.2: no version information available (required by /usr/bin/amixer) /usr/bin/amixer: /usr/lib/libasound.so.2: no version information available (required by /usr/bin/amixer) /usr/bin/amixer: /usr/lib/libasound.so.2: no version information available (required by /usr/bin/amixer) cat: can't open '/proc/stb/video/plane/psi_tint': No such file or directory Invalid card number. Usage: amixer <options> command Available options: -h,--help this help -c,--card N select the card -D,--device N select the device, default 'default' -d,--debug debug mode -n,--nocheck do not perform range checking -v,--version print version of this program -q,--quiet be quiet -i,--inactive show also inactive controls -a,--abstract L select abstraction level (none or basic) Available commands: scontrols show all mixer simple controls scontents show contents of all mixer simple controls (default command) Invalid card number. Usage: amixer <options> command Available options: -h,--help this help -c,--card N select the card -D,--device N select the device, default 'default' -d,--debug debug mode -n,--nocheck do not perform range checking -v,--version print version of this program -q,--quiet be quiet -i,--inactive show also inactive controls -a,--abstract L select abstraction level (none or basic) Available commands: scontrols show all mixer simple controls scontents show contents of all mixer simple controls (default command) sset sID P set contents for one mixer simple control sget sID get contents for one mixer simple control controls show all controls for given card contents show contents of all controls for given card cset cID P set control contents for one control cget cID get control contents for one control Invalid card number. Usage: amixer <options> command Available options: -h,--help this help -c,--card N select the card -D,--device N select the device, default 'default' -d,--debug debug mode -n,--nocheck do not perform range checking -v,--version print version of this program -q,--quiet be quiet -i,--inactive show also inactive controls -a,--abstract L select abstraction level (none or basic) Available commands: scontrols show all mixer simple controls scontents show contents of all mixer simple controls (default command) sset sID P set contents for one mixer simple control sget sID get contents for one mixer simple control controls show all controls for given card contents show contents of all controls for given card cset cID P set control contents for one control cget cID get control contents for one control sset sID P set contents for one mixer simple control sget sID get contents for one mixer simple control controls show all controls for given card contents show contents of all controls for given card cset cID P set control contents for one control cget cID get control contents for one control /etc/init.d/rcS: line 667: can't create /dev/vfd: No such device or address starting e2-> cat: can't open '/proc/stb/video/plane/psi_tint': No such file or directory udhcpc: sending select for 192.168.178.140 udhcpc: lease of 192.168.178.140 obtained, lease time 864000 route: SIOCDELRT: No such process adding dns 192.168.178.1 ip: SIOCGIFFLAGS: No such device ip: SIOCGIFFLAGS: No such device done. cat: can't open '/proc/stb/video/plane/psi_tint': No such file or directory rm: can't remove '/media/USB/SWAPPART': No such file or directory rm: can't remove '/media/USB/Record': No such file or directory mount: mounting LABEL=RECORD on /hdd failed: No such file or directory cat: can't open '/proc/stb/video/plane/psi_tint': No such file or directory cat: can't open '/proc/stb/video/plane/psi_tint': No such file or directory cat: can't open '/proc/stb/video/plane/psi_tint': No such file or directory cat: can't open '/proc/stb/video/plane/psi_tint': No such file or directory cat: can't open '/proc/stb/video/plane/psi_tint': No such file or directory PYTHONPATH: /usr/lib/enigma2/python DVB_API_VERSION 5 DVB_API_VERSION_MINOR 3 ENIGMA_DEBUG_LVL=3 cat: can't open '/proc/stb/video/plane/psi_tint': No such file or directory /dev/fb0: No such device [gFBDC] no framebuffer available Segmentation fault e2 ended <- RTV: 139 * INIT: Switching to runstarting e2-> INIT: Sending processes the TERM signal Sending all processes the TERM signal...done. Sending all processes the KILL signal...done. Deactivating swap...umount: tmpfs busy - remounted read-only done. Unmounting local filesystems...umount: tmpfs busy - remounted read-only umount: can't unmount /mnt: Invalid argument done. '0▒▒(Re)start USB... Front USB: scanning bus for devices... 3 USB Device(s) found scanning bus for storage devices... 1 Storage Device(s) found system volume information/ $recycle.bin/ 262144000 root.img 3012738 uimage 2 file(s), 2 dir(s) reading uImage ...................................................................................................................................................................................................................................................................................................... ret=> 3012738 Wait [1] Wait [2] Wait [3] Wait [4] Wait [5] Wait [6] ext2fs_check_if_mount: Can't check if filesystem is mounted due to missing mtab file while determining whether /mnt/root.img is mounted. /mnt/root.img: clean, 6238/64000 files, 121990/256000 blocks mount root INIT: version 2.88 booting insmod: can't insert '/lib/modules/e2_proc.ko': invalid module format init frontpanel insmod: /lib/modules/nuvoton.ko: module not found insmod: can't insert '/lib/modules/simu_button.ko': invalid module format [mountvirtfs] Mount /dev in tmpfs [mountvirtfs] Copying device nodes to /dev Starting portmap daemon.... Loading autofs insmod: can't insert '/lib/modules/autofs4.ko': invalid module format Starting autofs [mountall] Mounting local filesystems... mount: mounting LABEL=RECORD on /hdd failed: No such file or directory Cleaning /tmp. insmod: can't insert '/lib/modules/cpu_frequ.ko': invalid module format /etc/init.d/rcS: line 667: can't create /proc/cpu_frequ/pll0_ndiv_mdiv: nonexistent directory Hostname: 1008G+SE+. init stmfb insmod: can't insert '/lib/modules/stmcore-display-sti7111.ko': invalid module format insmod: can't insert '/lib/modules/stmfb.ko': invalid module format /etc/init.d/rcS: line 667: can't create /dev/vfd: No such device or address LOADING MODULES load firmware copLoadFile (file /boot/audio.elf) ustslave: Kernel Version: 24 base_address 0x40400000 copLoadFile (file /boot/video.elf) ustslave: Kernel Version: 24 base_address 0x40000000 init embx insmod: can't insert '/lib/modules/embxshell.ko': invalid module format insmod: can't insert '/lib/modules/embxmailbox.ko': invalid module format insmod: can't insert '/lib/modules/embxshm.ko': invalid module format insmod: can't insert '/lib/modules/mme_host.ko': invalid module format init AVS insmod: can't insert '/lib/modules/avs.ko': invalid module format insmod: can't insert '/lib/modules/mmelog.ko': invalid module format skip mpeg2 insmod: can't insert '/lib/modules/ksound.ko': invalid module format insmod: can't insert '/lib/modules/p2div64.ko': invalid module format insmod: can't insert '/lib/modules/stm_v4l2.ko': invalid module format insmod: can't insert '/lib/modules/pseudocard.ko': invalid module format insmod: can't insert '/lib/modules/lnb.ko': invalid module format insmod: can't insert '/lib/modules/stv090x.ko': invalid module format insmod: /lib/modules/starci.ko: module not found insmod: can't insert '/lib/modules/pti.ko': invalid module format insmod: can't insert '/lib/modules/stm_monitor.ko': invalid module format insmod: can't insert '/lib/modules/stmsysfs.ko': invalid module format insmod: can't insert '/lib/modules/stmdvb.ko': invalid module format insmod: can't insert '/lib/modules/player2.ko': invalid module format insmod: can't insert '/lib/modules/sth264pp.ko': invalid module format insmod: can't insert '/lib/modules/stmalloc.ko': invalid module format insmod: can't insert '/lib/modules/platform.ko': invalid module format insmod: can't insert '/lib/modules/silencegen.ko': invalid module format insmod: can't insert '/lib/modules/smartcard.ko': invalid module format insmod: can't insert '/lib/modules/ntfs.ko': invalid module format insmod: can't insert '/lib/modules/bpamem.ko': invalid module format /etc/init.d/rcS: line 667: can't create /proc/stb/video/videomode: nonexistent directory [evremote2] vBoxType: 0 (LircdName) [evremote2] Remote selected: (null) [evremote2] RemoteControl Map: Keyname Keyword KeyCode -------------------------------------- - ▒ - 15 - ▒▒▒o(@ - 4194600 - 0 - 11 - - 588 - h @ - 8 $ - ▒▒▒o - 3 -------------------------------------- [evremote2] Frontpanel Map: Keyname Keyword KeyCode -------------------------------------- -------------------------------------- [evremote2] Supports Long KeyPress: yes [mountall] Mounting local filesystems... showSinglePic /boot/bootlogo.mvi VIDEO_SET_FORMAT failed (Bad file descriptor) Deconfiguring network interfaces... mount: mounting LABEL=RECORD on /hdd failed: No such file or directory [set_was_timer_wakeup] error reading /etc/enigma2/timers.xml [set_was_timer_wakeup] no timer aktiv /usr/bin/amixer: /usr/lib/libasound.so.2: no version information available (required by /usr/bin/amixer) /usr/bin/amixer: /usr/lib/libasound.so.2: no version information available (required by /usr/bin/amixer) /usr/bin/amixer: /usr/lib/libasound.so.2: no version information available (required by /usr/bin/amixer) cat: can't open '/proc/stb/video/plane/psi_tint': No such file or directory Invalid card number. Invalid card number. Invalid card number. Usage: amixer <options> command Available options: -h,--help this help -c,--card N select the card -D,--device N select the device, default 'default' -d,--debug debug mode -n,--nocheck do not perform range checking -v,--version print version of this program -q,--quiet be quiet -i,--inactive show also inactive controls -a,--abstract L select abstraction level (none or basic) Available commands: scontrols show all mixer simple controls scontents show contents of all mixer simple controls (default command) sset sID P set contents for one mixer simple control sget sID get contents for one mixer simple control controls show all controls for given card contents show contents of all controls for given card cset cID P set control contents for one control ifdown: interface eth1 not configured ifdown: interface wlan0 not configured done. Usage: amixer <options> command Available options: -h,--help this help -c,--card N select the card -D,--device N select the device, default 'default' -d,--debug debug mode -n,--nocheck do not perform range checking -v,--version print version of this program -q,--quiet be quiet -i,--inactive show also inactive controls -a,--abstract L select abstraction level (none or basic) Available commands: scontrols show all mixer simple controls scontents show contents of all mixer simple controls (default command) sset sID P set contents for one mixer simple control sget sID get contents for one mixer simple control controls show all controls for given card contents show contents of all controls for given card cset cID P set control contents for one control cget cID get control contents for one control Usage: amixer <options> command Available options: -h,--help this help -c,--card N select the card -D,--device N select the device, default 'default' -d,--debug debug mode -n,--nocheck do not perform range checking -v,--version print version of this program -q,--quiet be quiet -i,--inactive show also inactive controls -a,--abstract L select abstraction level (none or basic) Available commands: scontrols show all mixer simple controls scontents show contents of all mixer simple controls (default command) sset sID P set contents for one mixer simple control sget sID get contents for one mixer simple control controls show all controls for given card contents show contents of all controls for given card cset cID P set control contents for one control cget cID get control contents for one control cget cID get control contents for one control cat: can't open '/proc/stb/video/plane/psi_tint': No such file or directory /etc/init.d/rcS: line 667: can't create /dev/vfd: No such device or address starting e2-> Setting up IP spoofing protection: rp_filter. Configuring network interfaces... udhcpc: started, v1.28.0 udhcpc: sending discover cat: can't open '/proc/stb/video/plane/psi_tint': No such file or directory udhcpc: sending select for 192.168.178.141 udhcpc: lease of 192.168.178.141 obtained, lease time 864000 route: SIOCDELRT: No such process adding dns 192.168.178.1 ip: SIOCGIFFLAGS: No such device ip: SIOCGIFFLAGS: No such device done. mount: mounting LABEL=RECORD on /hdd failed: No such file or directory cat: can't open '/proc/stb/video/plane/psi_tint': No such file or directory PYTHONPATH: /usr/lib/enigma2/python DVB_API_VERSION 5 DVB_API_VERSION_MINOR 3 ENIGMA_DEBUG_LVL=3 cat: can't open '/proc/stb/video/plane/psi_tint': No such file or directory /dev/fb0: No such device [gFBDC] no framebuffer available Segmentation fault e2 ended <- RTV: 139 * INIT: Switching to runstarting e2-> INIT: Sending processes the TERM signal Sending all processes the TERM signal...done. Sending all processes the KILL signal...done. Deactivating swap...umount: tmpfs busy - remounted read-only done. Unmounting local filesystems...umount: tmpfs busy - remounted read-only umount: can't unmount /mnt: Invalid argument done. '0▒▒oting... FrTs