Jetzt macht er Reboot schleife

Code:
'0▒▒(Re)start USB...
Front USB:   scanning bus for devices... 3 USB Device(s) found
       scanning bus for storage devices... 1 Storage Device(s) found
            system volume information/
            $recycle.bin/
 262144000   root.img
  3012738   uimage

2 file(s), 2 dir(s)

reading uImage
......................................................................................................................................................................................................................................................................................................
ret=> 3012738
Wait [1]
Wait [2]
Wait [3]
Wait [4]
Wait [5]
Wait [6]
ext2fs_check_if_mount: Can't check if filesystem is mounted due to missing mtab file while determining whether /mnt/root.img is mounted.
/mnt/root.img: clean, 6217/64000 files, 121587/256000 blocks
mount root
INIT: version 2.88 booting
insmod: can't insert '/lib/modules/e2_proc.ko': invalid module format
init frontpanel
insmod: /lib/modules/nuvoton.ko: module not found
insmod: can't insert '/lib/modules/simu_button.ko': invalid module format
WAIT 1 min
/etc/init.d/rcS: line 215: can't create /dev/vfd: No such device or address
mknod: /dev/avs: File exists
mknod: /dev/fuse: File exists
[mountvirtfs] Mount /dev in tmpfs
[mountvirtfs] Copying device nodes to /dev
Starting portmap daemon....
Loading autofs
insmod: can't insert '/lib/modules/autofs4.ko': invalid module format
Starting autofs
[mountall] Mounting local filesystems...
mount: mounting LABEL=RECORD on /hdd failed: No such file or directory
Cleaning /tmp /var/run /var/lock.
insmod: can't insert '/lib/modules/cpu_frequ.ko': invalid module format
/etc/init.d/rcS: line 667: can't create /proc/cpu_frequ/pll0_ndiv_mdiv: nonexistent directory
Hostname: 1008G+SE+.
init stmfb
insmod: can't insert '/lib/modules/stmcore-display-sti7111.ko': invalid module format
insmod: can't insert '/lib/modules/stmfb.ko': invalid module format
/etc/init.d/rcS: line 667: can't create /dev/vfd: No such device or address
LOADING MODULES
load firmware
copLoadFile file /boot/audio.elf)
ustslave: Kernel Version: 24
base_address 0x40400000
copLoadFile (file /boot/video.elf)
ustslave: Kernel Version: 24
base_address 0x40000000
init embx
insmod: can't insert '/lib/modules/embxshell.ko': invalid module format
insmod: can't insert '/lib/modules/embxmailbox.ko': invalid module format
insmod: can't insert '/lib/modules/embxshm.ko': invalid module format
insmod: can't insert '/lib/modules/mme_host.ko': invalid module format
init AVS
insmod: can't insert '/lib/modules/avs.ko': invalid module format
insmod: can't insert '/lib/modules/mmelog.ko': invalid module format
skip mpeg2
insmod: can't insert '/lib/modules/ksound.ko': invalid module format
insmod: can't insert '/lib/modules/p2div64.ko': invalid module format
insmod: can't insert '/lib/modules/stm_v4l2.ko': invalid module format
insmod: can't insert '/lib/modules/pseudocard.ko': invalid module format
insmod: can't insert '/lib/modules/lnb.ko': invalid module format
insmod: can't insert '/lib/modules/stv090x.ko': invalid module format
insmod: /lib/modules/starci.ko: module not found
insmod: can't insert '/lib/modules/pti.ko': invalid module format
insmod: can't insert '/lib/modules/stm_monitor.ko': invalid module format
insmod: can't insert '/lib/modules/stmsysfs.ko': invalid module format
insmod: can't insert '/lib/modules/stmdvb.ko': invalid module format
insmod: can't insert '/lib/modules/player2.ko': invalid module format
insmod: can't insert '/lib/modules/sth264pp.ko': invalid module format
insmod: can't insert '/lib/modules/stmalloc.ko': invalid module format
insmod: can't insert '/lib/modules/platform.ko': invalid module format
insmod: can't insert '/lib/modules/silencegen.ko': invalid module format
insmod: can't insert '/lib/modules/smartcard.ko': invalid module format
insmod: can't insert '/lib/modules/ntfs.ko': invalid module format
insmod: can't insert '/lib/modules/bpamem.ko': invalid module format
/etc/init.d/rcS: line 667: can't create /proc/stb/video/videomode: nonexistent directory
[evremote2] vBoxType: 0 (LircdName)
[evremote2] Remote selected: (null)
[evremote2] RemoteControl Map:
             Keyname  Keyword  KeyCode
--------------------------------------
                     -   ▒  -   15
                    -  ▒▒▒o(@  -  4194600
                     -  0  -   11
                     -     -  588
                     -  h       @  -    8
                   $  -  ▒▒▒o  -    3
--------------------------------------
[evremote2] Frontpanel Map:
             Keyname  Keyword  KeyCode
--------------------------------------
--------------------------------------
[evremote2] Supports Long KeyPress: yes
[mountall] Mounting local filesystems...
showSinglePic /boot/bootlogo.mvi
VIDEO_SET_FORMAT failed (Bad file descriptor)
Deconfiguring network interfaces... ifdown: interface lo not configured
ifdown: interface eth0 not configured
ifdown: interface eth1 not configured
ifdown: interface wlan0 not configured
done.
Setting up IP spoofing protection: rp_filter.
Configuring network interfaces... mount: mounting LABEL=RECORD on /hdd failed: No such file or directory
udhcpc: started, v1.28.0
udhcpc: sending discover
[set_was_timer_wakeup] error reading /etc/enigma2/timers.xml
[set_was_timer_wakeup] no timer aktiv
/usr/bin/amixer: /usr/lib/libasound.so.2: no version information available (required by /usr/bin/amixer)
/usr/bin/amixer: /usr/lib/libasound.so.2: no version information available (required by /usr/bin/amixer)
/usr/bin/amixer: /usr/lib/libasound.so.2: no version information available (required by /usr/bin/amixer)
cat: can't open '/proc/stb/video/plane/psi_tint': No such file or directory
Invalid card number.
Usage: amixer <options> command

Available options:
  -h,--help       this help
  -c,--card N     select the card
  -D,--device N   select the device, default 'default'
  -d,--debug      debug mode
  -n,--nocheck    do not perform range checking
  -v,--version    print version of this program
  -q,--quiet      be quiet
  -i,--inactive   show also inactive controls
  -a,--abstract L select abstraction level (none or basic)

Available commands:
  scontrols       show all mixer simple controls
  scontents       show contents of all mixer simple controls (default command)
Invalid card number.
Usage: amixer <options> command

Available options:
  -h,--help       this help
  -c,--card N     select the card
  -D,--device N   select the device, default 'default'
  -d,--debug      debug mode
  -n,--nocheck    do not perform range checking
  -v,--version    print version of this program
  -q,--quiet      be quiet
  -i,--inactive   show also inactive controls
  -a,--abstract L select abstraction level (none or basic)

Available commands:
  scontrols       show all mixer simple controls
  scontents       show contents of all mixer simple controls (default command)
  sset sID P      set contents for one mixer simple control
  sget sID        get contents for one mixer simple control
  controls        show all controls for given card
  contents        show contents of all controls for given card
  cset cID P      set control contents for one control
  cget cID        get control contents for one control
Invalid card number.
Usage: amixer <options> command

Available options:
  -h,--help       this help
  -c,--card N     select the card
  -D,--device N   select the device, default 'default'
  -d,--debug      debug mode
  -n,--nocheck    do not perform range checking
  -v,--version    print version of this program
  -q,--quiet      be quiet
  -i,--inactive   show also inactive controls
  -a,--abstract L select abstraction level (none or basic)

Available commands:
  scontrols       show all mixer simple controls
  scontents       show contents of all mixer simple controls (default command)
  sset sID P      set contents for one mixer simple control
  sget sID        get contents for one mixer simple control
  controls        show all controls for given card
  contents        show contents of all controls for given card
  cset cID P      set control contents for one control
  cget cID        get control contents for one control
  sset sID P      set contents for one mixer simple control
  sget sID        get contents for one mixer simple control
  controls        show all controls for given card
  contents        show contents of all controls for given card
  cset cID P      set control contents for one control
  cget cID        get control contents for one control
/etc/init.d/rcS: line 667: can't create /dev/vfd: No such device or address
starting e2->
cat: can't open '/proc/stb/video/plane/psi_tint': No such file or directory
udhcpc: sending select for 192.168.178.140
udhcpc: lease of 192.168.178.140 obtained, lease time 864000
route: SIOCDELRT: No such process
adding dns 192.168.178.1
ip: SIOCGIFFLAGS: No such device
ip: SIOCGIFFLAGS: No such device
done.
cat: can't open '/proc/stb/video/plane/psi_tint': No such file or directory
rm: can't remove '/media/USB/SWAPPART': No such file or directory
rm: can't remove '/media/USB/Record': No such file or directory
mount: mounting LABEL=RECORD on /hdd failed: No such file or directory
cat: can't open '/proc/stb/video/plane/psi_tint': No such file or directory
cat: can't open '/proc/stb/video/plane/psi_tint': No such file or directory
cat: can't open '/proc/stb/video/plane/psi_tint': No such file or directory
cat: can't open '/proc/stb/video/plane/psi_tint': No such file or directory
cat: can't open '/proc/stb/video/plane/psi_tint': No such file or directory
PYTHONPATH: /usr/lib/enigma2/python
DVB_API_VERSION 5 DVB_API_VERSION_MINOR 3
ENIGMA_DEBUG_LVL=3
cat: can't open '/proc/stb/video/plane/psi_tint': No such file or directory
/dev/fb0: No such device
[gFBDC] no framebuffer available
Segmentation fault
e2 ended <- RTV:  139
*
INIT: Switching to runstarting e2->
INIT: Sending processes the TERM signal
Sending all processes the TERM signal...done.
Sending all processes the KILL signal...done.
Deactivating swap...umount: tmpfs busy - remounted read-only
done.
Unmounting local filesystems...umount: tmpfs busy - remounted read-only
umount: can't unmount /mnt: Invalid argument
done.
'0▒▒(Re)start USB...
Front USB:   scanning bus for devices... 3 USB Device(s) found
       scanning bus for storage devices... 1 Storage Device(s) found
            system volume information/
            $recycle.bin/
 262144000   root.img
  3012738   uimage

2 file(s), 2 dir(s)

reading uImage
......................................................................................................................................................................................................................................................................................................
ret=> 3012738
Wait [1]
Wait [2]
Wait [3]
Wait [4]
Wait [5]
Wait [6]
ext2fs_check_if_mount: Can't check if filesystem is mounted due to missing mtab file while determining whether /mnt/root.img is mounted.
/mnt/root.img: clean, 6238/64000 files, 121990/256000 blocks
mount root
INIT: version 2.88 booting
insmod: can't insert '/lib/modules/e2_proc.ko': invalid module format
init frontpanel
insmod: /lib/modules/nuvoton.ko: module not found
insmod: can't insert '/lib/modules/simu_button.ko': invalid module format
[mountvirtfs] Mount /dev in tmpfs
[mountvirtfs] Copying device nodes to /dev
Starting portmap daemon....
Loading autofs
insmod: can't insert '/lib/modules/autofs4.ko': invalid module format
Starting autofs
[mountall] Mounting local filesystems...
mount: mounting LABEL=RECORD on /hdd failed: No such file or directory
Cleaning /tmp.
insmod: can't insert '/lib/modules/cpu_frequ.ko': invalid module format
/etc/init.d/rcS: line 667: can't create /proc/cpu_frequ/pll0_ndiv_mdiv: nonexistent directory
Hostname: 1008G+SE+.
init stmfb
insmod: can't insert '/lib/modules/stmcore-display-sti7111.ko': invalid module format
insmod: can't insert '/lib/modules/stmfb.ko': invalid module format
/etc/init.d/rcS: line 667: can't create /dev/vfd: No such device or address
LOADING MODULES
load firmware
copLoadFile (file /boot/audio.elf)
ustslave: Kernel Version: 24
base_address 0x40400000
copLoadFile (file /boot/video.elf)
ustslave: Kernel Version: 24
base_address 0x40000000
init embx
insmod: can't insert '/lib/modules/embxshell.ko': invalid module format
insmod: can't insert '/lib/modules/embxmailbox.ko': invalid module format
insmod: can't insert '/lib/modules/embxshm.ko': invalid module format
insmod: can't insert '/lib/modules/mme_host.ko': invalid module format
init AVS
insmod: can't insert '/lib/modules/avs.ko': invalid module format
insmod: can't insert '/lib/modules/mmelog.ko': invalid module format
skip mpeg2
insmod: can't insert '/lib/modules/ksound.ko': invalid module format
insmod: can't insert '/lib/modules/p2div64.ko': invalid module format
insmod: can't insert '/lib/modules/stm_v4l2.ko': invalid module format
insmod: can't insert '/lib/modules/pseudocard.ko': invalid module format
insmod: can't insert '/lib/modules/lnb.ko': invalid module format
insmod: can't insert '/lib/modules/stv090x.ko': invalid module format
insmod: /lib/modules/starci.ko: module not found
insmod: can't insert '/lib/modules/pti.ko': invalid module format
insmod: can't insert '/lib/modules/stm_monitor.ko': invalid module format
insmod: can't insert '/lib/modules/stmsysfs.ko': invalid module format
insmod: can't insert '/lib/modules/stmdvb.ko': invalid module format
insmod: can't insert '/lib/modules/player2.ko': invalid module format
insmod: can't insert '/lib/modules/sth264pp.ko': invalid module format
insmod: can't insert '/lib/modules/stmalloc.ko': invalid module format
insmod: can't insert '/lib/modules/platform.ko': invalid module format
insmod: can't insert '/lib/modules/silencegen.ko': invalid module format
insmod: can't insert '/lib/modules/smartcard.ko': invalid module format
insmod: can't insert '/lib/modules/ntfs.ko': invalid module format
insmod: can't insert '/lib/modules/bpamem.ko': invalid module format
/etc/init.d/rcS: line 667: can't create /proc/stb/video/videomode: nonexistent directory
[evremote2] vBoxType: 0 (LircdName)
[evremote2] Remote selected: (null)
[evremote2] RemoteControl Map:
             Keyname  Keyword  KeyCode
--------------------------------------
                     -   ▒  -   15
                    -  ▒▒▒o(@  -  4194600
                     -  0  -   11
                     -     -  588
                     -  h       @  -    8
                   $  -  ▒▒▒o  -    3
--------------------------------------
[evremote2] Frontpanel Map:
             Keyname  Keyword  KeyCode
--------------------------------------
--------------------------------------
[evremote2] Supports Long KeyPress: yes
[mountall] Mounting local filesystems...
showSinglePic /boot/bootlogo.mvi
VIDEO_SET_FORMAT failed (Bad file descriptor)
Deconfiguring network interfaces... mount: mounting LABEL=RECORD on /hdd failed: No such file or directory
[set_was_timer_wakeup] error reading /etc/enigma2/timers.xml
[set_was_timer_wakeup] no timer aktiv
/usr/bin/amixer: /usr/lib/libasound.so.2: no version information available (required by /usr/bin/amixer)
/usr/bin/amixer: /usr/lib/libasound.so.2: no version information available (required by /usr/bin/amixer)
/usr/bin/amixer: /usr/lib/libasound.so.2: no version information available (required by /usr/bin/amixer)
cat: can't open '/proc/stb/video/plane/psi_tint': No such file or directory
Invalid card number.
Invalid card number.
Invalid card number.
Usage: amixer <options> command

Available options:
  -h,--help       this help
  -c,--card N     select the card
  -D,--device N   select the device, default 'default'
  -d,--debug      debug mode
  -n,--nocheck    do not perform range checking
  -v,--version    print version of this program
  -q,--quiet      be quiet
  -i,--inactive   show also inactive controls
  -a,--abstract L select abstraction level (none or basic)

Available commands:
  scontrols       show all mixer simple controls
  scontents       show contents of all mixer simple controls (default command)
  sset sID P      set contents for one mixer simple control
  sget sID        get contents for one mixer simple control
  controls        show all controls for given card
  contents        show contents of all controls for given card
  cset cID P      set control contents for one control
ifdown: interface eth1 not configured
ifdown: interface wlan0 not configured
done.
Usage: amixer <options> command

Available options:
  -h,--help       this help
  -c,--card N     select the card
  -D,--device N   select the device, default 'default'
  -d,--debug      debug mode
  -n,--nocheck    do not perform range checking
  -v,--version    print version of this program
  -q,--quiet      be quiet
  -i,--inactive   show also inactive controls
  -a,--abstract L select abstraction level (none or basic)

Available commands:
  scontrols       show all mixer simple controls
  scontents       show contents of all mixer simple controls (default command)
  sset sID P      set contents for one mixer simple control
  sget sID        get contents for one mixer simple control
  controls        show all controls for given card
  contents        show contents of all controls for given card
  cset cID P      set control contents for one control
  cget cID        get control contents for one control
Usage: amixer <options> command

Available options:
  -h,--help       this help
  -c,--card N     select the card
  -D,--device N   select the device, default 'default'
  -d,--debug      debug mode
  -n,--nocheck    do not perform range checking
  -v,--version    print version of this program
  -q,--quiet      be quiet
  -i,--inactive   show also inactive controls
  -a,--abstract L select abstraction level (none or basic)

Available commands:
  scontrols       show all mixer simple controls
  scontents       show contents of all mixer simple controls (default command)
  sset sID P      set contents for one mixer simple control
  sget sID        get contents for one mixer simple control
  controls        show all controls for given card
  contents        show contents of all controls for given card
  cset cID P      set control contents for one control
  cget cID        get control contents for one control
  cget cID        get control contents for one control
cat: can't open '/proc/stb/video/plane/psi_tint': No such file or directory
/etc/init.d/rcS: line 667: can't create /dev/vfd: No such device or address
starting e2->
Setting up IP spoofing protection: rp_filter.
Configuring network interfaces... udhcpc: started, v1.28.0
udhcpc: sending discover
cat: can't open '/proc/stb/video/plane/psi_tint': No such file or directory
udhcpc: sending select for 192.168.178.141
udhcpc: lease of 192.168.178.141 obtained, lease time 864000
route: SIOCDELRT: No such process
adding dns 192.168.178.1
ip: SIOCGIFFLAGS: No such device
ip: SIOCGIFFLAGS: No such device
done.
mount: mounting LABEL=RECORD on /hdd failed: No such file or directory
cat: can't open '/proc/stb/video/plane/psi_tint': No such file or directory
PYTHONPATH: /usr/lib/enigma2/python
DVB_API_VERSION 5 DVB_API_VERSION_MINOR 3
ENIGMA_DEBUG_LVL=3
cat: can't open '/proc/stb/video/plane/psi_tint': No such file or directory
/dev/fb0: No such device
[gFBDC] no framebuffer available
Segmentation fault
e2 ended <- RTV:  139
*
INIT: Switching to runstarting e2->
INIT: Sending processes the TERM signal
Sending all processes the TERM signal...done.
Sending all processes the KILL signal...done.
Deactivating swap...umount: tmpfs busy - remounted read-only
done.
Unmounting local filesystems...umount: tmpfs busy - remounted read-only
umount: can't unmount /mnt: Invalid argument
done.
'0▒▒oting... FrTs