Seite 1 von 2 12 LetzteLetzte
Ergebnis 1 bis 10 von 13
  1. #1
    Benutzer
    Registriert seit
    02.02.2013
    Beiträge
    38
    Thanks
    9
    Thanked 13 Times in 11 Posts

    HDMU_17212_E2_ufs922_217_git_614 funktioniert leider nicht

    Leider funktioniert das Image noch nicht. Installiert mit MultiPartInstaller. Nach dem Flash und Neustart bleibt es bei "LOAD" hängen.
    Das wird sicher bei allen Boxen so sein.
    Geht nicht, gibts nicht!


  2. #2
    Moderator Avatar von morly
    Registriert seit
    15.07.2012
    Ort
    Österreich
    Beiträge
    6.684
    Thanks
    789
    Thanked 2.764 Times in 1.357 Posts
    nö, ufs913 klappt
    hast ein log?
    "Every Setback is a Set Up for a Comeback"


  3. #3
    Benutzer
    Registriert seit
    02.02.2013
    Beiträge
    38
    Thanks
    9
    Thanked 13 Times in 11 Posts
    Leider kein log, wüßte auch nicht, wie ich eines erstellen kann, da ja über Ethernet kein Zugriff ist.

    Nun doch einen Weg gefunden und Log erstellt. Ist aber bereits das HDMU_17311 installiert.
    Geändert von Onkel Blue (23.01.2018 um 02:11 Uhr)
    Geht nicht, gibts nicht!


  4. #4
    Benutzer
    Registriert seit
    02.02.2013
    Beiträge
    38
    Thanks
    9
    Thanked 13 Times in 11 Posts

    Log UFS922

    Code:
    #Log file from Morlys SH4 STB Admin Tool from: Di Jan 23 2018, 00:47:09
    
    ÿ
    
    Board: STb7100-Mboard (MB411)  [29-bit mode]
    
    
    U-Boot 1.3.1 (Jul 13 2009 - 19:14:41) - stm23-2008-06-03
    
    DRAM:  64 MB
    NOR:   16 MB
    In:    serial
    Out:   serial
    Err:   serial
    Serial 3 Intialized
    VFD_Driver Init
    VFD_Controller Type : NEW Kathrein VFD using PIC
    Test Class : GetInstance()
    Test Class : GetInstance()
    RawBuffer.cpp at RawBuffer ,29
    FD = 0
    SWRecoveryHandler.cpp at Recover ,46
    No Recovery Needed
    End of testCpp
    Hit any key to stop autoboot:  0 
    Original bootargs = console=ttyAS0,115200 root=/dev/mtdblock3 mem=83m bigphysarea=5632 coprocessor_mem=3m@0x04000000,3m@0x04300000 
    ethaddr = 00:D0:55:04:5B:F2
    
    new Params = console=ttyAS0,115200 root=/dev/mtdblock3 mem=83m bigphysarea=5632 coprocessor_mem=3m@0x04000000,3m@0x04300000 stmmaceth=ethaddr:00:D0:55:04:5B:F2
    
    ## Booting image at 80040000 ...
       Image Name:   Linux-2.6.23.17-MB411_7109-STSDK
       Created:      2009-12-08  23:40:22 UTC
       Image Type:   SuperH Linux Kernel Image (gzip compressed)
       Data Size:    1820882 Bytes =  1.7 MB
       Load Address: 84601000
       Entry Point:  84602000
       Verifying Checksum ... OK
       Uncompressing Kernel Image ... OK
    
    Starting kernel console=ttyAS0,115200 root=/dev/mtdblock3 mem=83m bigphysarea=5632 coprocessor_mem=3m@0x04000000,3m@0x04300000 stmmaceth=ethaddr:00:D0:55:04:5B:F2
     - 0x00000000 - 0 ...
    
    Linux version 2.6.23.17-MB411_7109-STSDK (kdhong@localhost.localdomain) (gcc version 4.2.4 (snapshot) (STMicroelectronics/Linux Base 4.2.4-46)) #166 PREEMPT Wed Dec 9 00:40:20 CET 2009
    Booting machvec: mb448
    Node 0: start_pfn = 0x4600, low = 0x9900
    Zone PFN ranges:
      Normal      17920 ->    39168
    Movable zone start PFN for each node
    early_node_map[1] active PFN ranges
        0:    17920 ->    39168
    STMicroelectronics STb7109E Reference board initialisation
    STx7109 version 3.x
    Chip version 3.4
    Built 1 zonelists in Zone order.  Total pages: 21082
    Kernel command line: console=ttyAS0,115200 root=/dev/mtdblock3 mem=83m bigphysarea=5632 coprocessor_mem=3m@0x04000000,3m@0x04300000 stmmaceth=ethaddr:00:D0:55:04:5B:F2
    
    BPA2 (bigphysarea) @ 0x04a0d000 size 0x015fffff
    st-coprocessor: Region spans memory boundary
    st-coprocessor: Failed to reserve memory at 0x04300000
    PID hash table entries: 512 (order: 9, 2048 bytes)
    Using tmu for system timer
    Using 16.594 MHz high precision timer.
    Console: colour dummy device 80x25
    console [ttyAS0] enabled
    Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
    Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
    Memory: 58148k/84992k available (2537k kernel code, 638k data, 84k init)
    PVR=04061100 CVR=30480000 PRR=00009300
    I-cache : n_ways=2 n_sets=256 way_incr=8192
    I-cache : entry_mask=0x00001fe0 alias_mask=0x00001000 n_aliases=2
    D-cache : n_ways=2 n_sets=512 way_incr=16384
    D-cache : entry_mask=0x00003fe0 alias_mask=0x00003000 n_aliases=4
    Mount-cache hash table entries: 512
    CPU: STb7109
    NET: Registered protocol family 16
    Generic PHY: Registered new driver
    SCSI subsystem initialized
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    Time: SuperH clocksource has been installed.
    NET: Registered protocol family 2
    IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
    TCP established hash table entries: 4096 (order: 3, 32768 bytes)
    TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
    TCP: Hash tables configured (established 4096 bind 4096)
    TCP reno registered
    GPIO 5 7 is occupied by USBPWR
    NTFS driver 2.1.28 [Flags: R/O].
    JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
    io scheduler noop registered
    io scheduler anticipatory registered (default)
    io scheduler deadline registered
    io scheduler cfq registered
    STMicroelectronics ASC driver initialized
    GPIO 4 3 is occupied by stasc
    GPIO 4 2 is occupied by stasc
    stasc.0: ttyAS0 at MMIO 0x18032000 (irq = 121) is a stasc
    stasc.1: ttyAS1 at MMIO 0x18033000 (irq = 120) is a stasc
    STMMAC driver:
        platform registration... <6>done!
        MAC 10/100
    Command Line = 147 console=ttyAS0,115200 root=/dev/mtdblock3 mem=83m bigphysarea=5632 coprocessor_mem=3m@0x04000000,3m@0x04300000 stmmaceth=ethaddr:00:D0:55:04:5B:F2
    
    ENV = 00:D0:55:04:5B:F2ÿÿÿ
    s_env_mac[0] = 0
    s_env_mac[1] = 0
    s_env_mac[2] = :
    s_env_mac[3] = D
    s_env_mac[4] = 0
    s_env_mac[5] = :
    s_env_mac[6] = 5
    s_env_mac[7] = 5
    s_env_mac[8] = :
    s_env_mac[9] = 0
    s_env_mac[10] = 4
    s_env_mac[11] = :
    s_env_mac[12] = 5
    s_env_mac[13] = B
    s_env_mac[14] = :
    s_env_mac[15] = F
    s_env_mac[16] = 2
    get ether addr = 0, d0, 55, 4, 5b, f2 
    STMMAC MII Bus: probed
    STe100p: Registered new driver
    STe101p: Registered new driver
    pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver
    usbcore: registered new interface driver pegasus
    physmap platform flash device: 01000000 at 00000000
    physmap-flash: Found 1 x16 devices at 0x0 in 16-bit bank
     Amd/Fujitsu Extended Query Table at 0x0040
    physmap-flash: CFI does not contain boot bank location. Assuming top.
    number of CFI chips: 1
    cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
    RedBoot partition parsing not available
    Using physmap partition information
    Creating 10 MTD partitions on "physmap-flash":
    0x00000000-0x00040000 : "Boot firmware :     0xA000.0000-0xA003.FFFF"
    0x00040000-0x00200000 : "Kernel -         0xA004.0000-0xA01F.FFFF"
    0x00200000-0x002a0000 : "Config FS -         0xA020.0000-0xA029.FFFF"
    0x002a0000-0x004e0000 : "Root FS-        0xA02A.0000-0xA04D.FFFF"
    0x004e0000-0x01000000 : "App + GTK 1        0xA04E.0000-0xA0FF.FFFF"
    0x004e0000-0x01000000 : "App + GTK 2        0xA04E.0000-0xA0FF.FFFF"
    0x004e0000-0x01000000 : "App + GTK 3        0xA04E.0000-0xA0FF.FFFF"
    0x00000000-0x01000000 : "All Flash Block    0xA000.0000-0xA0FF.FFFF"
    0x00040000-0x01000000 : "Update Flash Block    0xA004.0000-0xA0FF.FFFF"
    0x00040000-0x01000000 : "Update Flash Block    0xA004.0000-0xA0FF.FFFF"
    stm-ehci stm-ehci.0: STM EHCI Host Controller
    stm-ehci stm-ehci.0: new USB bus registered, assigned bus number 1
    stm-ehci stm-ehci.0: irq 169, io mem 0x191ffe00
    stm-ehci stm-ehci.0: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004
    usb usb1: configuration #1 chosen from 1 choice
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 1 port detected
    stm-ohci stm-ohci.0: STM OHCI Host Controller
    stm-ohci stm-ohci.0: new USB bus registered, assigned bus number 2
    stm-ohci stm-ohci.0: irq 168, io mem 0x191ffc00
    usb usb2: configuration #1 chosen from 1 choice
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 1 port detected
    i2c /dev entries driver
    STMicroelectronics - Coprocessors st231 Init
    st231.0 Coprocessor -------------------------------------------
        flags 0001 RAM start at 0xa4000000  size      0x00300000
                      cop. addr 0x04000000
        Channels : Not defined
        IRQ      : not used
    ---------------------------------------------------------------
    st-coprocessor-1: No RAM reserved
    st231.1 Coprocessor -------------------------------------------
        not configured!
    ---------------------------------------------------------------
    stm_rng hardware driver 1.0 configured
    TCP cubic registered
    NET: Registered protocol family 1
    NET: Registered protocol family 17
    ieee80211: 802.11 data/management/control stack, git-1.1.13
    ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
    usb 1-1: new high speed USB device using stm-ehci and address 2
    VFS: Mounted root (cramfs filesystem) readonly.
    Freeing unused kernel memory: 84k freed
    usb 1-1: configuration #1 chosen from 1 choice
    hub 1-1:1.0: USB hub found
    hub 1-1:1.0: 4 ports detected
    /etc/init.d/rcS running...
    Remounting root file system in read-write mode...mount: Can't find / in /etc/fstab
    : Success
    mount: Mounting / on (null) failed: Success
    [70G[[1;31mFAILED[0;39m]
    /etc/rcS.d/S200mountfs: /etc/rcS.d/S200mountfs: 91: cannot create /etc/mtab: Read-only file system
    mount: Can't find / in /etc/fstab
    : Success
    mount: Mounting / on (null) failed: Success
    Mounting other file systems...[70G[  [1;32mOK[0;39m  ]
    Bringing up the loopback interface...[70G[  [1;32mOK[0;39m  ]
    Setting up hostname...(none)
    [70G[  [1;32mOK[0;39m  ]
    Setup Ethernet HW Address... : skipped
    Setup Ramfs... : skipped
    Invoking Telnet Server...
    telnetd: '/bin/login' unavailable.
    Telnet Server Started...
    
    
    BusyBox v1.1.0 (2006.03.02-09:48+0000) Built-in shell (ash)
    Enter 'help' for a list of built-in commands.
    
    /config/start.sh exists .... running /config/start.sh
    scsi0 : sata_stm
    ata1: SATA max UDMA/133 cmd 0xb9209000 ctl 0xb9209820 bmdma 0x00000000 irq 170
    ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    ata1.00: ATA-8: Hitachi HCS545050GLA380, GM4OA5DG, max UDMA/133
    ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 0/32)
    ata1.00: configured for UDMA/133
    scsi 0:0:0:0: Direct-Access     ATA      Hitachi HCS54505 GM4O PQ: 0 ANSI: 5
    sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
     sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
    sd 0:0:0:0: [sda] Attached SCSI disk
    start Barry Allen
    kjournald starting.  Commit interval 5 seconds
    EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
    EXT3 FS on sda5, internal journal
    EXT3-fs: sda5: 1 orphan inode deleted
    EXT3-fs: recovery complete.
    EXT3-fs: mounted filesystem with ordered data mode.
    ln: /var/ba/ba: File exists
    device probe found 2 display pipelines
    AllocateDMAArea: BPA2 partition 'coredisplay-video' not available in this kernel
    stmfb: fb0 parameters = "1280x720-24@60:3M:NTSC:YUV:YUV"
    stmfb: fb1 parameters = "720x576-24@50i:1M:PAL:CVBS"
    OK - booting 9 HDMU_17311_E2_ufs922_217_git_616_nodebug_mix_USB
    -------------------------------
    rm: cannot remove `/var/standby.log': No such file or directory
    virtual CSTmBDispAQ::~CSTmBDispAQ() @ 863145e8: 0 starts, 0 (0/0) interrupts, 4 wait_idle, 0 wait_next, 0 idle
    virtual CSTmBDispAQ::~CSTmBDispAQ() @ 863145e8: 0 ops, 0 ops/start, 0 ops/idle, 0 starts/idle
    rm: cannot remove `/var/ba': No such file or directory
    calculated crc = 0x675a3fd ->read crc = 0x675a3fd
    calculated crc = 0x675a3fd ->read crc = 0x675a3fd
    sd 0:0:0:0: [sda] Synchronizing SCSI cache
    Res
    
    Board: STb7100-Mboard (MB411)  [29-bit mode]
    
    
    U-Boot 1.3.1 (Jul 13 2009 - 19:14:41) - stm23-2008-06-03
    
    DRAM:  64 MB
    NOR:   16 MB
    In:    serial
    
    Out:   serial
    Err:   serial
    Serial 3 Intialized
    VFD_Driver Init
    VFD_Controller Type : NEW Kathrein VFD using PIC
    Test Class : GetInstance()
    Test Class : GetInstance()
    RawBuffer.cpp at RawBuffer ,29
    FD = 0
    SWRecoveryHandler.cpp at Recover ,46
    No Recovery Needed
    End of testCpp
    Hit any key to stop autoboot:  0 
    Saving Environment to EEPROM...
    
    Reset IDE: Bus 0: OK 
      Device 0: Model: Hitachi HCS545050GLA380  Firm: GM4OA5DG Ser#: FG5K03PR60XNAB
                Type: Hard Disk
                Supports 48-bit addressing
                Capacity: 476940.0 MB = 465.7 GB (976773168 x 512)
    
    399 bytes read
    ## Executing script at a4900000
    BarryAllen 0.8 bootargs
    
    Reset IDE: Bus 0: OK 
      Device 0: Model: Hitachi HCS545050GLA380  Firm: GM4OA5DG Ser#: FG5K03PR60XNAB
                Type: Hard Disk
                Supports 48-bit addressing
                Capacity: 476940.0 MB = 465.7 GB (976773168 x 512)
    
    1857815 bytes read
    Original bootargs = console=ttyAS0,115200 root=/dev/sda5 rw ip=192.168.0.120:192.168.0.1:192.168.0.1:255.255.255.0:kathrein:eth0:off mem=128m init=/bin/devinit coprocessor_mem=4m@0x10000000,4m@0x10400000 
    ethaddr = 00:D0:55:04:5B:F2
    
    new Params = console=ttyAS0,115200 root=/dev/sda5 rw ip=192.168.0.120:192.168.0.1:192.168.0.1:255.255.255.0:kathrein:eth0:off mem=128m init=/bin/devinit coprocessor_mem=4m@0x10000000,4m@0x10400000 stmmaceth=ethaddr:00:D0:55:04:5B:F2
    
    ## Booting image at a5000000 ...
       Image Name:   Linux-2.6.32.71_stm24_0217
       Created:      2018-01-22   2:57:27 UTC
       Image Type:   SuperH Linux Kernel Image (gzip compressed)
       Data Size:    1857751 Bytes =  1.8 MB
       Load Address: 84001000
       Entry Point:  84002000
       Verifying Checksum ... OK
       Uncompressing Kernel Image ... OK
    
    Starting kernel console=ttyAS0,115200 root=/dev/sda5 rw ip=192.168.0.120:192.168.0.1:192.168.0.1:255.255.255.0:kathrein:eth0:off mem=128m init=/bin/devinit coprocessor_mem=4m@0x10000000,4m@0x10400000 stmmaceth=ethaddr:00:D0:55:04:5B:F2
     - 0x00000000 - 0 ...
    
    
    INIT: version 2.88 booting
    
    Starte chroot
    init frontpanel
    [mountvirtfs] Mount /dev in tmpfs
    [mountvirtfs] Copying device nodes to /dev
    Starting portmap daemon...Illegal instruction
     failed!
    Loading autofs
    Starting autofs
    [mountall] Mounting local filesystems...
    Cleaning /tmp.
    Hostname: UFS922.
    init stmfb
    LOADING MODULES
    load firmware
    copLoadFile (file /boot/audio.elf)
    error ReadBytes
    copLoadFile (file /boot/video.elf)
    ustslave: Kernel Version: 24
    base_address 0x10000000
    init embx
    Geht nicht, gibts nicht!

  5. The Following User Says Thank You to Onkel Blue For This Useful Post:



  6. #5
    Moderator Avatar von morly
    Registriert seit
    15.07.2012
    Ort
    Österreich
    Beiträge
    6.684
    Thanks
    789
    Thanked 2.764 Times in 1.357 Posts
    fixed, thx
    "Every Setback is a Set Up for a Comeback"


  7. #6
    Benutzer
    Registriert seit
    02.02.2013
    Beiträge
    38
    Thanks
    9
    Thanked 13 Times in 11 Posts
    Die 913 startet zwar, geht man über Menu auf Einstellungen/System findet eine unvollständige Liste.
    Geht nicht, gibts nicht!

  8. The Following User Says Thank You to Onkel Blue For This Useful Post:



  9. #7
    Boardgründer/Administrator Avatar von bonkel
    Registriert seit
    03.05.2012
    Beiträge
    8.468
    Thanks
    509
    Thanked 4.504 Times in 1.979 Posts
    Was heisst unvollständig ? Expert Settings aktiviert ?

    Gesendet von meinem SM-G935F mit Tapatalk

    Gehasst, Verdammt, Vergöttert
    Fragen gehören ins Forum nicht in meinem Postfach!
    >> Häufig gestellte Fragen <<


  10. #8
    Moderator Avatar von morly
    Registriert seit
    15.07.2012
    Ort
    Österreich
    Beiträge
    6.684
    Thanks
    789
    Thanked 2.764 Times in 1.357 Posts
    der eine, zweizeilige (falsche) Eintrag ist gefixt
    "Every Setback is a Set Up for a Comeback"


  11. #9
    Benutzer
    Registriert seit
    02.02.2013
    Beiträge
    38
    Thanks
    9
    Thanked 13 Times in 11 Posts
    Sorry, war ne Weile off. Ja Expert Settings sind aktiviert. Werde mal ein Foto machen und reinstellen. Mit unvollständig meine ich: Es sind wenig Einstellmöglichkeiten un d besonders auffallend ist eine zerstückelte Zeile etwa in der Mitte der Liste. Komme aber erst morgen dazu, das Foto einzustellen.
    Geht nicht, gibts nicht!


  12. #10
    Moderator Avatar von morly
    Registriert seit
    15.07.2012
    Ort
    Österreich
    Beiträge
    6.684
    Thanks
    789
    Thanked 2.764 Times in 1.357 Posts
    zerstückelte Zeile ist gefixt, die fehlenden level 1 und 2 Einträge sind mir bekannt, ich check das!
    "Every Setback is a Set Up for a Comeback"


Berechtigungen

  • Neue Themen erstellen: Nein
  • Themen beantworten: Nein
  • Anhänge hochladen: Nein
  • Beiträge bearbeiten: Nein
  •