Ergebnis 1 bis 9 von 9
  1. #1
    Benutzer
    Registriert seit
    07.10.2012
    Beiträge
    61
    Thanks
    1
    Thanked 17 Times in 16 Posts

    HDMU_17311_E2_at7500_217_git_616_Flash stürzt ab

    Das Image rebootet nach Flashen mit und ohne Sprachauswahl.

    Gruss
    Surfacedj

    Log vom Erststart ohne setting übernahme

    Code:
    #Log file from Morlys SH4 STB Admin Tool from: Mo Jan 22 2018, 13:12:02
    
    FrTs
    
    
    INIT: version 2.88 booting
    
    init frontpanel
    WAIT 1 min
    fsck.jfs version 1.1.15, 04-Mar-2011
    processing started: 1/1/2000 1:00:04
    The current device is:  /dev/sda1
    
    The superblock does not describe a correct jfs file system.
    
    If device /dev/sda1 is valid and contains a jfs file system,
    then both the primary and secondary superblocks are corrupt
    and cannot be repaired, and fsck cannot continue.
    
    Otherwise, make sure the entered device /dev/sda1 is correct.
    
    [mountvirtfs] Mount /dev in tmpfs
    [mountvirtfs] Copying device nodes to /dev
    Starting portmap daemon....
    Loading autofs
    Starting autofs
    [mountall] Mounting local filesystems...
    Cleaning /tmp /var/run /var/lock.
    Hostname: AT7500.
    init stmfb
    LOADING MODULES
    load firmware
    copLoadFile (file /boot/audio.elf)
    ustslave: Kernel Version: 24
    base_address 0x40400000
    copLoadFile (file /boot/video.elf)
    ustslave: Kernel Version: 24
    base_address 0x40000000
    init embx
    init AVS
    skip mpeg2
    insmod: can't insert '/lib/modules/lnbh221.ko': unknown symbol in module, or unknown parameter
    insmod: can't insert '/lib/modules/lnb_pio.ko': unknown symbol in module, or unknown parameter
    insmod: can't insert '/lib/modules/lnb_a8293.ko': unknown symbol in module, or unknown parameter
    insmod: can't insert '/lib/modules/avl2108.ko': unknown symbol in module, or unknown parameter
    [mountall] Mounting local filesystems...
    Deconfiguring network interfaces... [evremote2] Model: 'atevio7500'
    [evremote2] vBoxType: 8 (atevio7500)
    [evremote2] Input device name: "TDT RC event driver"
    [evremote2] Remote selected: Fortis RemoteControl
    [evremote2] RemoteControl Map:
                 Keyname  Keyword  KeyCode
    --------------------------------------
                    MENU  -  04  -  139
                     RED  -  4B  -  398
                   GREEN  -  4A  -  399
                  YELLOW  -  49  -  400
                    BLUE  -  48  -  401
                    EXIT  -  1C  -  174
                    TEXT  -  0D  -  388
                     EPG  -  08  -  365
                  REWIND  -  58  -  168
             FASTFORWARD  -  5C  -  208
                    PLAY  -  55  -  207
                   PAUSE  -  07  -  119
                  RECORD  -  56  -  167
                    STOP  -  54  -  128
                 STANDBY  -  0A  -  116
                    MUTE  -  0C  -  113
               CHANNELUP  -  5E  -  104
             CHANNELDOWN  -  5F  -  109
                VOLUMEUP  -  4E  -  115
              VOLUMEDOWN  -  4F  -  114
                    INFO  -  06  -  358
                      OK  -  1F  -  352
                      UP  -  00  -  103
                   RIGHT  -  02  -  106
                    DOWN  -  01  -  108
                    LEFT  -  03  -  105
                    BACK  -  09  -  158
                    ZOOM  -  0B  -  372
                   VMODE  -  0E  -   47
              RESOLUTION  -  0F  -  393
                 TVRADIO  -  1A  -  378
                   SLEEP  -  1E  -  142
                    OPEN  -  40  -  361
                     FAV  -  41  -  364
                   TIMER  -  42  -  362
                    UPUP  -  43  -  414
                DOWNDOWN  -  44  -  415
                    NEXT  -  4C  -  407
                    LAST  -  50  -  412
                     PIP  -  51  -  375
                   MEDIA  -  52  -  226
                    LIST  -  53  -  395
                 0BUTTON  -  10  -   11
                 1BUTTON  -  11  -    2
                 2BUTTON  -  12  -    3
                 3BUTTON  -  13  -    4
                 4BUTTON  -  14  -    5
                 5BUTTON  -  15  -    6
                 6BUTTON  -  16  -    7
                 7BUTTON  -  17  -    8
                 8BUTTON  -  18  -    9
                 9BUTTON  -  19  -   10
    --------------------------------------
    [evremote2] Frontpanel Map:
                 Keyname  Keyword  KeyCode
    --------------------------------------
                 STANDBY  -  00  -  116
                      OK  -  06  -  352
                    MENU  -  05  -  139
                VOLUMEUP  -  03  -  115
              VOLUMEDOWN  -  04  -  114
               CHANNELUP  -  01  -  104
             CHANNELDOWN  -  02  -  109
    --------------------------------------
    [evremote2] Supports Long KeyPress: yes
    [evremote2 fortis] Period = 10, delay = 120
    [evremote2] Using period = 10 delay = 120
    showSinglePic /boot/bootlogo.mvi
    VIDEO_SELECT_SOURCE MEMORY (Success)
    VIDEO_PLAY (Success)
    VIDEO_CONTINUE: (Success)
    VIDEO_CLEAR_BUFFER: (Invalid argument)
    ifdown: interface lo not configured
    ifdown: interface eth0 not configured
    ifdown: interface eth1 not configured
    ifdown: interface wlan0 not configured
    done.
    Setting up IP spoofing protection: rp_filter.
    Configuring network interfaces... udhcpc: started, v1.28.0
    udhcpc: sending discover
    udhcpc: sending select for 192.168.0.100
    udhcpc: lease of 192.168.0.100 obtained, lease time 7200
    route: SIOCDELRT: No such process
    adding dns 83.169.186.161
    adding dns 83.169.185.161
    ip: SIOCGIFFLAGS: No such device
    ip: SIOCGIFFLAGS: No such device
    done.
    [set_was_timer_wakeup] error reading /etc/enigma2/timers.xml
    [set_was_timer_wakeup] no timer aktiv
    starting e2->
    
    /usr/bin/amixer: /usr/lib/libasound.so.2: no version information available (required by /usr/bin/amixer)
    /usr/bin/amixer: /usr/lib/libasound.so.2: no version information available (required by /usr/bin/amixer)
    /usr/bin/amixer: /usr/lib/libasound.so.2: no version information available (required by /usr/bin/amixer)
    Simple mixer control 'Analog',0
      Capabilities: pvolume pvolume-joined pswitch pswitch-joined
      Playback channels: Mono
      Limits: Playback -31 - 31
      Mono: Playback 6 [60%] [on]
    Simple mixer control 'SPDIF',0
      Capabilities: pvolume pvolume-joined pswitch pswitch-joined
      Playback channels: Mono
      Limits: Playback -31 - 31
      Mono: Playback 6 [60%] [on]
    Simple mixer control 'HDMI',0
      Capabilities: pvolume pvolume-joined pswitch pswitch-joined
      Playback channels: Mono
      Limits: Playback -31 - 31
      Mono: Playback 6 [60%] [on]
    rm: can't remove '/media/USB/RECORD': No such file or directory
    rm: can't remove '/media/USB/SWAPPART': No such file or directory
    rm: can't remove '/media/USB/MINI': No such file or directory
    rm: can't remove '/media/USB/Record': No such file or directory
    rm: can't remove '/media/USB/backup': No such file or directory
    PYTHONPATH: /usr/lib/enigma2/python
    DVB_API_VERSION 5 DVB_API_VERSION_MINOR 3
    ENIGMA_DEBUG_LVL=3
    [MAIN] executing main
    no profile data available
    libpng warning: iCCP: known incorrect sRGB profile
    libpng warning: iCCP: cHRM chunk does not match sRGB
    libpng warning: iCCP: known incorrect sRGB profile
    libpng warning: iCCP: cHRM chunk does not match sRGB
    [evremote2] KEY by code: 6C (DOWN)
    [evremote2] KEY_PRESS   - 6C 1
    [evremote2] KEY by code: 6C (DOWN)
    [evremote2] KEY by code: 6C (DOWN)
    [evremote2] KEY_RELEASE - 6C gKeycode=00 nextKey=01 gNextKey=01 CAUSE: Timeout
    [evremote2] KEY by code: 67 (UP)
    [evremote2] KEY_PRESS   - 67 1
    [evremote2] KEY_RELEASE - 67 gKeycode=00 nextKey=01 gNextKey=01 CAUSE: Timeout
    [evremote2] KEY by code: 67 (UP)
    [evremote2] KEY_PRESS   - 67 1
    [evremote2] KEY by code: 67 (UP)
    [evremote2] KEY by code: 67 (UP)
    [evremote2] KEY_RELEASE - 67 gKeycode=00 nextKey=01 gNextKey=01 CAUSE: Timeout
    [evremote2] KEY by code: 6C (DOWN)
    [evremote2] KEY_PRESS   - 6C 1
    [evremote2] KEY by code: 6C (DOWN)
    [evremote2] KEY by code: 6C (DOWN)
    [evremote2] KEY_RELEASE - 6C gKeycode=00 nextKey=01 gNextKey=01 CAUSE: Timeout
    [evremote2] KEY by code: 67 (UP)
    [evremote2] KEY_PRESS   - 67 1
    [evremote2] KEY by code: 67 (UP)
    [evremote2] KEY by code: 67 (UP)
    [evremote2] KEY_RELEASE - 67 gKeycode=00 nextKey=01 gNextKey=01 CAUSE: Timeout
    [evremote2] KEY by code: 160 (OK)
    [evremote2] KEY_PRESS   - 160 1
    [evremote2] KEY by code: 160 (OK)
    [evremote2] KEY by code: 160 (OK)
    [evremote2] KEY_RELEASE - 160 gKeycode=00 nextKey=01 gNextKey=01 CAUSE: Timeout
    [evremote2] KEY by code: 6C (DOWN)
    [evremote2] KEY_PRESS   - 6C 1
    [evremote2] KEY by code: 6C (DOWN)
    [evremote2] KEY by code: 6C (DOWN)
    [evremote2] KEY_RELEASE - 6C gKeycode=00 nextKey=01 gNextKey=01 CAUSE: Timeout
    [evremote2] KEY by code: 160 (OK)
    [evremote2] KEY_PRESS   - 160 1
    Traceback (most recent call last):
      File "usr/lib/enigma2/python/Components/ActionMap.py", line 65, in action
      File "usr/lib/enigma2/python/Components/ActionMap.py", line 46, in action
      File "usr/lib/enigma2/python/Screens/Wizard.py", line 376, in ok
      File "usr/lib/enigma2/python/Screens/Wizard.py", line 350, in finished
    IOError: [Errno 14] Bad address
    [evremote2] KEY by code: 160 (OK)
    [evremote2] KEY by code: 160 (OK)
    [evremote2] KEY_RELEASE - 160 gKeycode=00 nextKey=01 gNextKey=01 CAUSE: Timeout
    Killed
    e2 ended <- RTV:  137
    *
    starting e2->
    
    INIT: Switchin
    INIT: Sending processes the TERM signal
    
    Sending all processes the TERM signal...done.
    Sending all processes the KILL signal...done.
    Deactivating swap...umount: tmpfs busy - remounted read-only
    done.
    Unmounting local filesystems...umount: tmpfs busy - remounted read-only
    done.
    Rebooting... FrTs

  2. The Following User Says Thank You to Surfacedj For This Useful Post:



  3. #2
    Neuer Benutzer
    Registriert seit
    28.12.2012
    Beiträge
    11
    Thanks
    1
    Thanked 2 Times in 2 Posts
    Latest SF1028/AT7500 images usb do not load tuners...no tuners listed. Seems drivers or frontends arent being built.
    Also have to exit out of initial setup as any video settings set off spinners and reboot..

    thanks!

  4. The Following User Says Thank You to mountaineer For This Useful Post:



  5. #3
    Developer
    Registriert seit
    18.07.2012
    Ort
    Ridderkerk, Niederlande
    Beiträge
    634
    Thanks
    144
    Thanked 712 Times in 304 Posts
    Probably this is caused by unknown symbols in the .ko files. This is a build problem, usually occurring when rebuilding either the kernel or the drivers, without rebuilding the other of the pair.

    The occurrence of unknown symbols appears in the log; the kernel module having them is then not loaded (in this case apparently the tuner drivers).

    Regards,

    Audioniek.
    Receivers: Rebox: RE-4000, 8000, 9000, 2200, 2210, 2220, 4200, 4210, 4220, 8220, 8500, SAB Unix Triple, Golden Media Spark TripleX, Amiko Alien 2+, Sogno Spark Revolution, Kathrein UFS910(1 & 14W)/912/913/922(CX24116 & AVL2108 tuners), Vizyon revolution 820HD PVR, AB IPBox 91HD/9000HD/9000HD rev.2, Xsarius Alpha HD10, nBox BKSA/BSLA/BXZB/BZZB, Vitamin HD 5000
    Sats: Astra 1, 2 & 3, Hotbird
    Main activity: building my own E2 images for Fortis receivers

  6. The Following User Says Thank You to Audioniek For This Useful Post:



  7. #4
    Moderator Avatar von morly
    Registriert seit
    15.07.2012
    Ort
    Österreich
    Beiträge
    6.684
    Thanks
    789
    Thanked 2.764 Times in 1.357 Posts
    das problem beginnt, wie audioniek sagt, bereits beim fehler in insmod
    kann die kernel modules nicht laden,
    ich seh mir den buildprozess an, ob da der richtige eingetragen ist, ...
    "Every Setback is a Set Up for a Comeback"

  8. The Following User Says Thank You to morly For This Useful Post:



  9. #5
    Neuer Benutzer
    Registriert seit
    24.02.2014
    Ort
    Czech Rep.
    Beiträge
    8
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Hello guys..
    after few years of usage a system on flash i was decide to mode to USB mode.
    As i can see, there is some build issue .., my SF1028 wont boot to HDMU image .. 609 or 617.
    Is there some workaround to fix ko files, or is somebody here, who can post me link to HDMU_16614_E2_at7500_217_git_597 or something bootable and stable ?
    I have this build installed in Flash, and works fine.

    many thanks guys ..


  10. #6
    Developer
    Registriert seit
    18.07.2012
    Ort
    Ridderkerk, Niederlande
    Beiträge
    634
    Thanks
    144
    Thanked 712 Times in 304 Posts
    Do you use the original factory bootloader 6.00? For USB you need a bootloader that is capable of booting an image from USB. For the SF1028 the only option I know of is the bootloader used with Titanit. Warning: bootloader changes are always risky and you may end up with reseller ID puzzles. I would stick to the image in flash; it is faster. The only reason to switch to USB would in my opinion be the ability to use factory firmware in flash and E2/Neutrino from USB.

    Regards,

    Audioniek.
    Receivers: Rebox: RE-4000, 8000, 9000, 2200, 2210, 2220, 4200, 4210, 4220, 8220, 8500, SAB Unix Triple, Golden Media Spark TripleX, Amiko Alien 2+, Sogno Spark Revolution, Kathrein UFS910(1 & 14W)/912/913/922(CX24116 & AVL2108 tuners), Vizyon revolution 820HD PVR, AB IPBox 91HD/9000HD/9000HD rev.2, Xsarius Alpha HD10, nBox BKSA/BSLA/BXZB/BZZB, Vitamin HD 5000
    Sats: Astra 1, 2 & 3, Hotbird
    Main activity: building my own E2 images for Fortis receivers


  11. #7
    Neuer Benutzer
    Registriert seit
    24.02.2014
    Ort
    Czech Rep.
    Beiträge
    8
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Helle,
    sorry for mistake. I am able to boot, but latest images crash on Wizard .. , and if i exit on wizard, HDMU do not see a DVB-S2 tuners, so this is issue of incompatible KO files ?
    I was run some HDMU image from mid 2017 in internal flash .., it works fine (BL 6). Because there is really no space left on device, i was decide to jump to USB images.
    So i was install maxiboot, BP Neutrino and PKT works fine, but ..., it is not my cup of tea ? . I am just devotee of HDMU. .

    rgds


  12. #8
    Benutzer
    Registriert seit
    16.01.2018
    Beiträge
    38
    Thanks
    5
    Thanked 5 Times in 5 Posts
    Zitat Zitat von clown Beitrag anzeigen
    if i exit on wizard, HDMU do not see a DVB-S2 tuners
    Test this: Exit on wizard and install a settings-plugin.
    Kathrein UFS 913 mit HDMU_17313_E2_ufs913_217_git_614_nodebug_mix_Flash


  13. #9
    Developer
    Registriert seit
    18.07.2012
    Ort
    Ridderkerk, Niederlande
    Beiträge
    634
    Thanks
    144
    Thanked 712 Times in 304 Posts
    Zitat Zitat von clown Beitrag anzeigen
    if i exit on wizard, HDMU do not see a DVB-S2 tuners, so this is issue of incompatible KO files ?
    Probably still the same problem as flagged in posting #3.

    Regards,

    Audioniek.

    - - - Aktualisiert - - -

    Zitat Zitat von clown Beitrag anzeigen
    Because there is really no space left on device, i was decide to jump to USB images.
    Remove some or all of the WLAN drivers, They consume a lot of space and it is likely you only need one or none of them.

    Regards,

    Audioniek.
    Receivers: Rebox: RE-4000, 8000, 9000, 2200, 2210, 2220, 4200, 4210, 4220, 8220, 8500, SAB Unix Triple, Golden Media Spark TripleX, Amiko Alien 2+, Sogno Spark Revolution, Kathrein UFS910(1 & 14W)/912/913/922(CX24116 & AVL2108 tuners), Vizyon revolution 820HD PVR, AB IPBox 91HD/9000HD/9000HD rev.2, Xsarius Alpha HD10, nBox BKSA/BSLA/BXZB/BZZB, Vitamin HD 5000
    Sats: Astra 1, 2 & 3, Hotbird
    Main activity: building my own E2 images for Fortis receivers


Berechtigungen

  • Neue Themen erstellen: Nein
  • Themen beantworten: Nein
  • Anhänge hochladen: Nein
  • Beiträge bearbeiten: Nein
  •